Search

Miniature camera modules are widely used in mobile electronic devices such as mobile phones, personal digital assistants or tablet computers. The introduction of freeform surface in imaging systems provides numerous opportunities for enhanced performance, compactness and lightweight packaging. In this paper, we proposed a wide-angle, low-distortion and large-aperture optical system with freeform lens. A 110°full field of view, 1/1.8″ sensor size, 1.8 F number, 6.35 mm total track length (TTL) wide-angle high-resolution miniature camera lens was developed. The prototype exhibits a novel solution for wide-angle, ultra-short TTL lens in the application such as mobile phone cameras, wearable imaging systems and endoscopic systems. [ABSTRACT FROM AUTHOR]

Biologically inspired artificial vision research has led to innovative robotic vision systems with low optical aberration, wide field of view, and compact form factor. However, challenges persist in object detection and recognition against complex backgrounds and varied lighting. Inspired by the feline eye, which features a vertically elongated pupil and tapetum lucidum, this study introduces an artificial vision system designed for superior object detection and recognition in a monocular framework. Using a slit-like elliptical aperture and a patterned metal reflector beneath a hemispherical silicon photodiode array, the system reduces excessive light and enhances photosensitivity. This design achieves clear focus under bright light and enhanced sensitivity in dim conditions. Theoretical and experimental analyses demonstrate the system's ability to filter redundant information and detect camouflaged objects in diverse lighting, representing a substantial advancement in monocular camera technology and the potential of biomimicry in optical innovations. [ABSTRACT FROM AUTHOR]

Modeling the behavior of a prototype cantilevered X‐ray adaptive mirror (held from one end) demonstrates its potential for use on high‐performance X‐ray beamlines. Similar adaptive mirrors are used on X‐ray beamlines to compensate optical aberrations, control wavefronts and tune mirror focal distances at will. Controlled by 1D arrays of piezoceramic actuators, these glancing‐incidence mirrors can provide nanometre‐scale surface shape adjustment capabilities. However, significant engineering challenges remain for mounting them with low distortion and low environmental sensitivity. Finite‐element analysis is used to predict the micron‐scale full actuation surface shape from each channel and then linear modeling is applied to investigate the mirrors' ability to reach target profiles. Using either uniform or arbitrary spatial weighting, actuator voltages are optimized using a Moore–Penrose matrix inverse, or pseudoinverse, revealing a spatial dependence on the shape fitting with increasing fidelity farther from the mount. [ABSTRACT FROM AUTHOR]

The characteristics of subvisible particles (SbVPs) are critical quality attributes of injectable and ophthalmic solutions in pharmaceutical manufacturing. However, current compendial SbVP testing methods, namely the light obstruction method and the microscopic particle count method, are destructive and wasteful of target samples. In this study, we present the development of a non-destructive SbVP analyzer aiming to analyze SbVPs directly in drug product (DP) containers while keeping the samples intact. Custom sample housings are developed and incorporated into the analyzer to reduce optical aberrations introduced by the curvature of typical pharmaceutical DP sample containers. The analyzer integrates a light-sheet microscope structure and models the side scattering event from a particle with Mie scattering theory with refractive indices as prior information. Equivalent spherical particle size under assigned refractive index values is estimated, and the particle concentration is determined based on the number of scattering events and the volume sampled by the light sheet. The resulting analyzer's capability and performance to non-destructively analyze SbVPs in DP containers were evaluated using a series of polystyrene bead suspensions in ISO 2R and 6R vials. Our results and analysis show the particle analyzer is capable of directly detecting SbVPs from intact DP containers, sorting SbVPs into commonly used size bins (e.g. ≥ 2 µm, ≥ 5 µm, ≥ 10 µm, and ≥ 25 µm), and reliably quantifying SbVPs in the concentration range of 4.6e2 to 5.0e5 particle/mL with a margin of ± 15 % error based on a 90 % confidence interval. [ABSTRACT FROM AUTHOR]

In current biomedical and environmental detection, multi-modal optical imaging technology is playing an increasingly important role. By utilizing information from dimensions such as spectra and polarization, it reflects the detailed characteristics and material properties of the targets. However, as detection system performance becomes more complex, issues such as aberrations introduced by multilayered lenses, signal attenuation, decreased polarization sensitivity, and latency can no longer be ignored. These factors directly affect the assessment of image details, influencing subsequent analyses. In this paper, we propose a method for designing and optimizing spectrum-splitting filters that considers the wavefront aberration and transmittance of the multi-modal optical imaging system. The method of optimizing coating phases to minimize scalar phase aberrations while maximizing system transmission leads to substantially improved imaging performance. Simulation and experimental results demonstrate that the method can improve the imaging performance. The proposed approach has potential applications in fields such as biomedical field, multi-spectral, remote sensing and microscopy. [ABSTRACT FROM AUTHOR]

We previously proposed that the optical centroid efficiency (OCE) might be a preferred figure-of-merit to the enclosed energy of a rectangular pixel (EOD) for an instrument subject to unpredictable environmental jitter and alignment conditions. Here we follow the same symbols for the corresponding quantities, particularly the width of the pixel as being equal to 2d. Here we analyze the performance of the OCE vs. the EOD for the three Seidel primary aberrations of an optical component: spherical, coma, and astigmatism, plus defocus. We show that the OCE has an approximate U-shape when graphed against the EOD, for the aberrations ranging from 0 to 1.25λ. We conclude that for pixels larger than 2d = 3λF/#, a small pixel will feature better performance when expecting jitter, misalignment, and other environmental and unpredictable conditions. When evaluating the performance of low-aberration instruments in dynamic and unpredictable environments, the choice of the lager pixel 2d = 7λF/# might be advantageous. Its selection will result in the deterioration of image resolution. [ABSTRACT FROM AUTHOR]

(1) Background: Defining the optimum center for laser refractive corrections is difficult, with many of the available approaches having pros and cons. Decentered ablations result in undesirable side effects like halos, glare, monocular diplopia, and a reduction in visual acuity; (2) Methods: The ideal centration in refractive corrections should fulfil three requirements: covering a scotopic pupil; respecting the visual axis; and minimizing tissue removal. The implications of different centration strategies are discussed and shown graphically; (3) Results: Oversized asymmetric offset ablation faces fewer difficulties in registering static cyclotorsion, features less tissue wastage compared to a symmetric offset, and includes a certain amount of coma (and trefoil) in the profile, benefiting eyes with a pupil offset, which typically present with relevant amounts of coma and trefoil corneal aberrations due to decentered optics; (4) Conclusions: There is a need for a flexible choice of centration in refractive procedures to design customized and non-customized treatments optimally. An ideal optical zone covering the pupil with the widest entrance may be as important as a centration reference. [ABSTRACT FROM AUTHOR]

Purpose: To compare the clinical and aberrometric outcomes obtained with a new diffractive pentafocal intraocular lens (IOL) and a diffractive trifocal IOL. Methods: Patients bilaterally implanted with the pentafocal Intensity SeeLens IOL (Hanita Lenses) (n = 30) and the trifocal FineVision POD F IOL (PhysIOL) (n = 30) during cataract surgery were studied after 1 month for refraction, visual acuity, defocus curve, contrast sensitivity, Hartmann-Shack aberration, and double-pass aberration. The Quality of Vision (QoV) questionnaire was used to evaluate visual comfort. Results: Distance and near visual acuities were similar with the two IOLs, but distance-corrected intermediate visual acuity was better with the Intensity IOLs (0.03 ± 0.04 vs 0.11 ± 0.04 logMAR in the FineVision eyes, P <.01). The difference between objective and subjective refraction was more myopic for the Intensity IOL (−1.15 vs −0.29 diopters [D]). The defocus curve was flatter with the Intensity IOL. Contrast sensitivity was similar in both IOLs. Hartmann-Shack aberration and double-pass aberration were similar, but the modulation transfer function cut-off value was worse with the Intensity IOL: 11.6 ± 2.7 vs 15.3 ± 4.9 (P <.01). QoV scores were better with the Intensity IOL, in particular for glare, halos, and starburst. Conclusions: In this comparative series, the pentafocal Intensity IOL provided better intermediate vision and better defocus curve than the FineVision IOL, with comparable distance and near vision. The optical disturbances as reported by the patients were higher with the FineVision IOL. Additional studies will better define the aberration profile obtained with the pentafocal IOL. [J Refract Surg. 2024;40(9):e604–e613.] [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the intrasession repeatability of wavefront aberrations obtained by a combined adaptive optics visual simulator and Hartman-Shack aberrometer in pseudophakic eyes with and without previous corneal refractive surgery. Methods: Three consecutive measurements were performed in one eye of each individual. Total ocular aberrations were recorded up to the 5th Zernike order for a 4.5-mm pupil. Repeatability was assessed by calculating the within-subject standard deviation (Sw), the repeatability limit (R), and the intraclass correlation coefficient (ICC). Vector analysis was performed to assess astigmatism variability between scans. Results: The study enrolled 32 normal individuals and 24 individuals with a history of refractive surgery. In normal and eyes that had previous refractive surgery, respectively, the Sw values were 0.155 and 0.176 diopters (D) for sphere and 0.184 and 0.265 D for cylinder. The Sw values for all 3rd order terms ranged from 0.037 to 0.047 µm in normal eyes and 0.044 to 0.063 µm in eyes that had previous refractive surgery. The Sw for primary spherical aberration was 0.020 µm in normal eyes and 0.026 µm in eyes that had previous refractive surgery. ICC values for measurements of astigmatism yielded larger variability (ICC = 0.751 and 0.879). However, both groups demonstrated excellent repeatability (ICC > 0.9) for root mean square higher order aberrations (RMS-HOA) and total RMS values. Conclusions: In pseudophakic eyes, the adaptive optics Hartmann-Shack device demonstrated acceptable repeatability for measurement of sphere and 3rd and 4th order HOAs with higher variability for astigmatism measurements, especially in eyes with a prior history of corneal refractive surgery. [J Refract Surg. 2024;40(9):e645–e653.] [ABSTRACT FROM AUTHOR]

Purpose: To compare the postoperative outcomes following implantation of KERATACx ring segments (Imperial Medical Technologies Europe GmbH) in patients having eccentric keratoconus with three different topographic patterns. Methods: This retrospective cohort study was conducted at Maadi Eye Subspeciality Center, Cairo, Egypt. The study included patients with keratoconus who had implantation of KERATACx ring segments. Three groups were segregated based on topographic keratoconus patterns using the Sirius CSO Topographer (CSO Italia): type I ectasia where the cone coincides with the corneal flat axis, type II ectasia in which the cone coincides with neither the steep nor the flat axis and lies between the two axes, and type II ectasia for cones coinciding with the corneal steep axis. The visual and topographic outcomes were compared preoperatively and postoperatively for the three enrolled groups. Results: This study enrolled 92 eyes of 92 patients and had a mean ± standard deviation follow-up of 16.9 ± 9.2 months. The patients' medical records revealed that night vision complaints and halos around the light were experienced the most by the type III ectasia group (31.25%). For the type III ectasia group, four topographic indices and one visual parameter did not show statistically significant differences between the preoperative and postoperative data (inferior-superior difference at 2- and 4-mm diameter, coma aberration, higher order aberrations, and uncorrected distance visual acuity), contrary to the type I and II ectasia groups, which showed significant improvements in all evaluated parameters. Conclusions: The type III morphological pattern of ectasia is the least likely to benefit from KERATACx ring segments implantation. [J Refract Surg. 2024;40(9):e625–e634.] [ABSTRACT FROM AUTHOR]

Protecting qubits from accidental measurements is essential for controlled quantum operations, especially during state-destroying measurements or resets on adjacent qubits, in protocols like quantum error correction. Current methods to preserve atomic qubits against such disturbances waste coherence time, extra qubits, and introduce additional errors. We demonstrate the feasibility of in-situ state-reset and state-measurement of trapped ions, achieving >99.9% fidelity in preserving an 'asset' ion-qubit while a neighboring 'process' qubit is reset, and >99.6% preservation fidelity while applying a detection beam for 11 μs on the same neighbor at a distance of 6 μm. This is achieved through precise wavefront control of addressing optical beams and using a single ion as both a quantum sensor for optical aberrations and an intensity probe with >50 dB dynamic range. Our demonstrations advance quantum processors, enhancing speed and capabilities for tasks like quantum simulations of dissipation and measurement-driven phases, and implementing error correction. Protecting qubits from accidental measurements is essential for crucial quantum operations. Here, authors show high-fidelity preservation of an ion-qubit during state destroying operations on a neighbouring qubit, demonstrating the feasibility of in-situ state reset and measurement in trapped ions. [ABSTRACT FROM AUTHOR]

Individuals with Down syndrome are known to have a greater prevalence of ocular conditions such as strabismus, nystagmus, elevated refractive error, poor accommodative function, elevated higher‐order optical aberrations and corneal abnormalities. Related to these conditions, individuals with Down syndrome commonly have reduced best‐corrected visual acuity at both far and near viewing distances across their lifespan. This review summarises the various optical sources of visual acuity reduction in this population and describes clinical trials that have evaluated alternative spectacle prescribing strategies to minimise these optical deficits. Although refractive corrections may still have limitations in their ability to normalise visual acuity for individuals with Down syndrome, the current literature provides evidence for eye care practitioners to consider in their prescribing practices for this population to maximise visual acuity. These considerations include accounting for the presence of elevated higher‐order aberrations when determining refractive corrections and considering bifocal lens prescriptions, even for young children with Down syndrome. [ABSTRACT FROM AUTHOR]

Wide-angle metalenses in the longwave infrared have shown great advantages over the traditional refractive doublets or triplets, due to light weight, CMOS compatibility, and low cost. However, previous endeavors have been plagued by challenges including a narrow waveband, large F-number, distortion, and spherical aberration. To address these problems, this study introduces two dispersive metasurfaces, placed near the front focal plane and upon the rear plane of a plano-convex lens, to correct optical aberrations. Utilizing this methodology, we propose and experimentally demonstrate an aberration-corrected hybrid metalens for thermal imaging in the 8–12 μm waveband, featuring an FOV of 24°, F-number of 1.2, and diameter of 12.2 mm. The developed hybrid metalens rigorously evaluated, exhibits Modulation Transfer Function (MTF) values exceeding 0.2 at 20 Lp/mm across the full FOV, and features an average transmission of 48.7 %, a relative focusing efficiencies of up to 42.1 %, polarization insensitivity and broadband imaging capacity. These results emphasize the potential applications of our system in diverse fields, such as camera lenses, autonomous driving, healthcare, and environmental monitoring. [ABSTRACT FROM AUTHOR]

The paper proposes an X-ray optical scheme of a lithograph with a transmissive dynamic mask and a synchrotron radiation source. The image of a dynamic mask in the form of holes of small diameter is transferred with a decrease to a plate with a resist using a Schwarzschild projection lens. The formation of a topological pattern will occur due to the coordinated operation of the system for scanning a plate with a resist and a microelectromechanical system of a transmissive type. Objectives with a reduction of 10 and 20 times for obtaining 10–20 nm images of 200 nm holes of the dynamic mask are considered. The scheme of illumination of the mask is calculated, which provides uniform illumination on a field of 10 × 10 mm2. For the synchrotron Siberia-2 of the KISI on a bending magnet, the expected productivity of the lithograph will be up to 1/14 of a plate with a diameter of 100 mm per hour. [ABSTRACT FROM AUTHOR]

High-definition pyramidal aberrometers show high repeatability in normal and mild keratoconus eyes and moderate repeatability in advanced cases. These findings are significant for ocular wavefront-guided treatments. Purpose: To evaluate the intrasubject repeatability of pyramidal aberrometer measurements in a sample of keratoconus and normal eyes. Setting: American University of Beirut Medical Center, Beirut, Lebanon. Design: Prospective comparative repeatability analysis. Methods: Study population: Keratoconus and normal eyes from adult patients. Observation procedures: Each eye was evaluated with 3 consecutive acquisitions using a pyramidal aberrometer. Main outcome measures: The repeatability of different ocular higher-order aberrations and lower-order aberrations (HOAs and LOAs, respectively), and Zernike coefficients down to the fifth order, was evaluated. Repeatability was assessed by within-subject SDs (Sw), repeatability limits (r), and intraclass correlation coefficients (ICCs), among other parameters. Results: 72 keratoconus patients (72 eyes) and 76 normal patients (76 eyes) were included. In normal and keratoconus eyes, the ICC of total LOAs and HOAs, as well as each of the Zernike coefficients, was >0.9. The Sw for keratoconus eyes with mean maximal keratometry (Kmax) <50 diopters (D) was 0.1345 for total LOAs, 0.0619 for total HOAs, 0.0292 for horizontal coma, 0.0561 for vertical coma, and 0.0221 for spherical aberration as compared with 0.2696, 0.1486, 0.0972, 0.1497, and 0.0757 for keratoconus eyes with Kmax ≥50 D. Similar trend of better repeatability for grade 1 keratoconus and HOAs <2 D as compared with grades 2 and 3 keratoconus and eyes with HOAs >2 D were also noted. Conclusions: Ocular aberrometer measurements generated by high definition pyramidal aberrometers have high repeatability in both normal and mild keratoconus eyes and moderate repeatability, yet still clinically acceptable, in advanced keratoconus. This is of particular importance in ocular wavefront-guided treatments. [ABSTRACT FROM AUTHOR]

A fractional perfect optical vortex (FPOV) represents a class of structured light characterized by phase singularities carrying fractional orbital angular momentum (OAM). It manifests a notched annular intensity distribution, and notably, the size of this distribution remains independent of the topological charge. Conventional methods for generating FPOVs involve a series of cascaded bulk components, leading to optical aberrations due to alignment errors and impeding their integration into highly integrated devices. In this work, an experimental demonstration is presented of the broadband generation of FPOVs in the visible spectrum utilizing a monolithic plasmonic metasurface with phase‐only modulation. The metasurface allows for flexible control of various parameters of the FPOVs, including their topological charge, beam radius, ellipticity factor, orientation, and the number of opening gaps. Furthermore, as a proof‐of‐concept, an FPOV pair is utilized to encode a double‐digit hexadecimal number, showcasing the potential of a metasurface array for optical information encryption. This research establishes a highly integrated platform for FPOV generation, with implications for advancing their applications in optical information security. [ABSTRACT FROM AUTHOR]

Earth-based gravitational waves interferometric detectors are shot-noise limited in the high-frequency region of their sensitivity band. While enhancing the laser input power is the natural solution to improve on the shot noise limit, higher power also increases the optical aberration budget due to the laser absorption in the highly reflective coatings of mirrors, resulting in a drop of the sensitivity of the detector. Advanced Virgo exploits Hartmann Wavefront Sensors (HWSs) to locally measure the absorption-induced optical aberrations by monitoring the optical path length change in the core optics. Despite the very high sensitivity of Hartmann sensors, temperature fluctuations can cause a spurious curvature term to appear in the reconstructed wavefront due to the thermal expansion of the Hartmann plate, that could affect the accuracy of the aberration monitoring. We present the implementation and validation of a control loop to stabilize the Advanced Virgo HWS temperature at the order of Δ T ⩽ 0.01 K, keeping the spurious curvature within the detector's requirements on wavefront sensing accuracy. [ABSTRACT FROM AUTHOR]

This paper presents the latest technology of displays that have recently been expanding from Rigid to a variety of form factors that can be modified. In a flexible display, different types of films are laminated to ensure panel reliability and to control stress distribution. However, the mechanism for how the characteristics of commercialized films affect the panel has not been properly identified, and it is not easy to adjust the physical properties to find key factors. So we formed a film with various characteristics using UV curing process and found key properties that can affect flexible OLED panel through process change. We were able to confirm the results of the experiment by analyzing and supplementing simulations based on physics. Finally, based on the mechanism proposed by comparing aspects between films, panel characteristics were verified and reliable. [ABSTRACT FROM AUTHOR]

Adaptive optics (AO) systems correct optical phase aberrations of the incoming light generated by the atmosphere. To do so simultaneous estimators of the atmospheric turbulence parameters are required. For the family of wide-field AO (WFAO) systems, this information must be stratified in altitude. Among these vectorized estimations, wind profiling in altitude is needed for the reduction of temporal errors in AO loops or for the estimation of turbulence coherence time. This paper proposes a turbulence wind profiler called image processing based peak tracking algorithm (ipta). ipta is an image-processing based approach that automatically and reliably estimates wind velocity for several turbulent layers along the line of sight. The estimation of each wind layer is achieved by tracking peaks produced in cross-correlation maps from pairs of wavefront sensors (WFSs) slopes using the technique known as SLODAR (slope detection and ranging). Results for simulated and on-sky WFS data sets demonstrate that ipta outperforms one of the state of the art wind profiler methods [the profiler covariance parametrization of wind velocity (CAW)] in terms of accuracy and speed. Results also show that, in terms of execution time, our method scales better when the number of WFS lenslets is increased. Being an open source and reliable tool, we believe ipta can be a useful wind profiler for the AO community. [ABSTRACT FROM AUTHOR]

Objective: To investigate the correlation between higher-order aberrations (HOA) after small incision lenticule extraction (SMILE) and the severity of myopia and astigmatism, along with the relevant factors. These findings will provide valuable insights for decreasing the occurrence of HOA after SMILE and enhancing visual quality. Methods: A total of 75 patients (150 eyes) with myopia and astigmatism who underwent SMILE were categorized into four groups based on the severity of myopia and astigmatism: Myopia Group 1 (Group M1, spherical diopter ranged from -1.00 D to -4.00 D), Myopia Group 2 (Group M2, spherical diopter ranged from -4.10 D to -10.00 D), Astigmatism Group 1 (Group A1, cylindrical diopter ranged from 0 D to -1.00 D), and Astigmatism Group 2 (Group A2, cylindrical diopter ranged from -1.10 D to -3.00 D). A comprehensive assessment was performed to examine the association between HOA and various relevant factors, including a detailed analysis of the subgroups. Results: Group M1 had significantly lower levels of total eye coma aberration (CA), corneal total HOA (tHOA), internal tHOA, and vertical CA ( Z 3 - 1 ) after SMILE than Group M2 (P < 0.05). Similarly, Group A1 had significantly lower levels of total eye tHOA, CA, trefoil aberration (TA), corneal tHOA, TA, and vertical TA ( Z 3 - 3 ) after SMILE than Group A2 (P < 0.05). Pearson correlation analysis indicated a statistically significant positive relationship between the severity of myopia/astigmatism and most HOA (P < 0.05). Subgroup evaluations demonstrated a notable increase in postoperative HOA associated with myopia and astigmatism in Groups M2 and A2 compared with the control group. Lenticule thickness, postoperative central corneal thickness (CCT), postoperative uncorrected distance visual acuity (UDVA), and postoperative corneal Km and Cyl were strongly correlated with most HOA. Age, eyes, and postoperative intraocular pressure (IOP) were only associated with specific HOA. Conclusion: HOA positively correlated with the severity of myopia and astigmatism after SMILE. However, this relationship was not linear. HOA after SMILE was influenced by various factors, and additional specialized investigations are required to establish its clinical importance. [ABSTRACT FROM AUTHOR]

Background: Previously, there has been some work in the field of optical imaging on phase compensation by employing Legendre polynomials as an expansion of the phase function, and this seems to be an appealing unstudied area in the field of ultrasound imaging. Purpose: The paper is devoted to solving one of the problems of enhancing the authenticity of diagnostics data obtained in ultrasound visualization systems and presents a novel approach to aberration correction, which ensures a reliable eliminating of phase distortions. The novelty of the proposed approach consists in the use of the decomposition of the wave front by Legendre polynomials to approximate aberrations of the phase front of ultrasonic waves propagating through distorting layers. Methods: The phase aberrations are corrected using a single sector probe that captures echoes in synthetic aperture mode. The proposed method approximates the changes in the wave front by means of the Legendre polynomials. The performance was investigated by placing a 13‐mm‐wide ultrasonic probe with 64 elements operating at 2 MHz on the surface of a commercial quality control phantom ATS Model 539 through a distorting layer. The following metrics were measured: peak value, root mean square (RMS), full width at half maximum (FWHM), contrast‐to‐noise ratio (CNR). During the experiments, three different aberrators were used interchangeably as distorting layers, two of which were made of photopolymer resin with RMS values of 39 and 97 ns and a speed of sound close to that of a human temporal bone tissue, and the third was an ex vivo human temporal bone with the RMS value of 44 ns. To test the correction, three regions inside the phantom were examined. Two‐sided nonparametric Wilcoxon rank‐sum test was used for assessing the statistical significance. The significance level for this study was set at α ≤ 0.05. To counteract the problem of multiple comparisons, the p‐values were adjusted by the Holm–Bonferroni correction method. Results: The statistically significant results have demonstrated the possibility of increasing peak intensity value up to 3.08 times, reducing the RMS width and FWHM of the intensity angular distribution down to 60% and 82%, respectively, and increasing CNR up to 2.12 times by using the proposed phase distortion correction method, compared with the case without correction. The results show that the method can be used as an effective aberration correction technique for all tested regions inside the phantom and distorting layers. Its usage allowed correcting up to 97% of the aberrations caused by the ex vivo temporal bone model. Conclusion: The results show that the usage of the proposed method for aberration correction can successfully increase the intensity and reduce the angular width of the ultrasound wave scattered by the point targets inside the phantoms. The method works with different distorting layers and is capable of correcting phase aberrations in multiple sections of the sonogram. The limitation of the proposed method consists in the fact that it requires the use of aperture synthesis and access to raw radiofrequency data, which restricts its application in common scanners. [ABSTRACT FROM AUTHOR]

The Space High-cadence Observing Telescope (SHOT) is proposed to conduct a wide-field survey in one of the frequency bands between 1 and 3 THz with an aperture of 0.8 m. It will provide complete terahertz and far-infrared photometry with low-resolution spectroscopy throughout the sky, promoting the study of fast radio bursts, the formation and evolution of stars, and other scientific goals. The telescope will adopt a superconducting kinetic inductance detector to achieve a wide survey of terahertz imaging. This work designs the optical system of SHOT to obtain a large FOV of up to 1.5 deg and match the detector with the size of 60 mm × 60 mm and pixel pitch of 0.8 mm. The primary optical system adopts a Ritchey–Chrétien design. By adding a corrector lens to the optical system and optimization, the aberrations mainly caused by the optical elements in the detector system are reduced. The influence of each component assigned to different terahertz materials is analyzed. The results show that TPX is more suitable than the other two materials. The performance of the optimized optical system is close to its diffraction limit. It will have the characteristics of high image quality and compact layout. [ABSTRACT FROM AUTHOR]

The cornea is the most powerful refractive element of the eye and plays a fundamental role in the quality of vision. Imperfection of corneas shape leads to the focusing errors formation, known as optical aberrations, which are responsible for visual performance deterioration. Understanding and assessing wavefront errors in IOL selection and calculation is great importance to achieve maximum optical outcome in the postoperative period. The article presents literature data of the effect of higher-order aberrations on the vision quality in unoperated eyes, changes of the wavefront in the eyes after cornea surgical interventions, the effect of various types of IOLs (spherical, aspherical, multifocal and EDOF) on the total error of the eye wavefront, recommendations at their choice with different severity levels of optical aberrations, as well as promising areas of research on this issue.

In this paper, we present a laser triangulation sensor to measure the distance between the sensor and an object without contact using a diffraction slit rather than a traditional lens. We show that by replacing the lens with a slit, we can exploit the resulting diffraction pattern to have finer and yet simpler image analysis, yielding better estimation of the distance to the object. To test our hypothesis, we build a precision position table and a laser triangulation sensor, generate large data sets to test different estimation algorithms on various materials, and compare data acquisition using a traditional lens versus using a slit. We show that position estimation when using a slit is both more precise and more accurate than comparable methods using a lens. [ABSTRACT FROM AUTHOR]

A plane-symmetric optical system with a two-dimensional field light source, such as a soft X-ray and vacuum ultraviolet optical system, is widely used for synchrotron radiation source devices, microscopes and so on. Therefore, this paper studied third-order intrinsic aberration modification with second-order accuracy transfer of pupil coordinates and extrinsic aberration of these kinds of optical systems. First, we discuss the extrinsic aberration calculation method and derive the corresponding aberration expressions; in addition, we apply optical geometric relations and the polynomial fitting method to obtain a second-order accuracy transfer relationship expression of the pupil coordinates between adjacent optical surfaces and derived the modification calculation expressions of the intrinsic aberration caused by the above factor. Finally, the third-order intrinsic aberration modification with second-order accuracy transfer of pupil coordinates and extrinsic aberration expressions derived in this paper are applied to calculate ray spot diagrams of two soft X-ray and vacuum ultraviolet optical systems with meridional and sagittal field angle light sources, and these results are compared with those obtained from the ray-tracing software Shadow; this showed that the calculation accuracy of the aberration expressions is sufficient. [ABSTRACT FROM AUTHOR]

Purpose: To study the correlation of corneal topography, corneal biomechanical properties, and ocular aberrations with the magnitude of refractive error in myopic eyes. Methods: All myopic patients attending the clinic for refractive surgery were recruited. Data recorded included visual acuity, axial length (AL), central corneal thickness (CCT), manifest refraction spherical equivalent (MRSE), topography (Pentacam - Oculus), corneal biomechanical factors [ocular response analyzer (ORA)], and optical aberrations (iTrace). They were further categorized into group 1 (suitable for femto-LASIK) and group 2 (unsuitable for femto-LASIK). Results: Sixty eyes (30 myopes) of mean age 22.78 ± 2.71 years were enrolled. A negative correlation of refractive error was noted with AL (ρ = -0.9; P < 0.001), total aberrations (ρ = 0.53; P < 0.001), and lower-order aberrations (LOA) (ρ = 0.54; P < 0.001). A strongly positive correlation was noted between CCT and corneal hysteresis (CH) (ρ = 0.63; P < 0.001), CCT and CRF (ρ = 0.56; P < 0.001), CH and corneal resistance factor (CRF) (ρ = 0.83; P < 0.001), and Goldmann equivalent intraocular pressure (IOPg) and corneal compensated intraocular pressure (IOPcc) (ρ = 0.78; P < 0.001). An increase in higher-order aberrations (HOAs) as well as lower-order aberrations (LOAs) was noted with increasing sim-K [HOA (r = 0.73, P = 0.001); LOA (r = 0.601, P = 0.014)] and increasing CRF [HOA (r = 0.5, P = 0.006); LOA (r = 0.732, P = 0.001)] in group 2. The amount of refractive error, axial length, central corneal thickness, and sim-K were significantly different in the two groups. Conclusion: Increasing degree of myopia is associated with an increase in axial length, total aberrations, and lower-order aberrations. Corneal biomechanical parameters have a strong correlation with each other. Lower corneal biomechanics are noted in high myopes as they have weaker and thinner corneas. Corneal biomechanics and ocular aberrations do not differ significantly between cases suitable for femto-LASIK and cases unsuitable for femto-LASIK. [ABSTRACT FROM AUTHOR]

Optical metalenses offer a compact approach for the development of nanoscale optical devices with various imaging functionalities. Realizing high‐quality images using metalenses with large numerical aperture (NA) requires eliminating unwanted optical aberrations. Existing strategies have largely focused only on correcting chromatic aberrations, and a metalens capable of simultaneously correcting chromatic and spherical aberrations has not yet been developed. Here, this issue is addresed by realizing an aplanatic phase profile for a red–green–blue (RGB) achromatic metalens, thereby demonstrating an RGB‐achromatic aplanatic metalens. This device consists of crystalline silicon nanostructures and it enables RGB‐achromatic aplanatic focusing with an NA of 0.635. The focal length of metalens remains unchanged at the three RGB wavelengths, whereas the associated focal spots are significantly smaller than those of an RGB‐achromatic metalens with spherical aberrations. An enhanced RGB imaging resolution is demonstrated, offering exciting opportunities to power up various imaging and display applications using flat metalenses. [ABSTRACT FROM AUTHOR]

The study compares the capabilities of using 3D acoustic models of the human head, constructed using magnetic resonance imaging (MRI) and computed tomography (CT) data, to simulate ultrasound beam focusing when passing through skull bones and to compensate for aberrations caused by them. A CT and MRI dataset from one patient was considered. The MRI data were used to reconstruct segments of the human head (skin, skull, and brain) that were homogeneous in their internal structure. The most realistic CT model took into account the internal inhomogeneities of the skull bones and soft tissues. Field simulations and compensation for aberrations were performed using the Rayleigh integral and pseudospectral method for solving the wave equation in an inhomogeneous medium, implemented in the k-Wave software package. The transducer was considered to be a fully populated 256-element phased array with a frequency of 1 MHz and radius of curvature and an aperture of 200 mm. It was shown that when aberrations were compensated using an inhomogeneous CT model and a homogeneous MRI model, the pressure amplitude at the focus and focusing efficiency were different by less than 10%. Thus, a homogeneous MRI model can be used for preoperative assessment of the feasibility of transcranial ultrasound therapy. During therapy, it is preferable to take into account the internal structure of the skull bones based on CT data. [ABSTRACT FROM AUTHOR]

This study presents a numerical simulation-based investigation of a MEMS (micro-electromechanical systems)technology-based deformable mirror employing a piezoelectric film for fundus examination in adaptive optics. Compared to the classical equal-area electrode arrangement model, we optimize the electrode array for higher-order aberrations. The optimized model centralizes electrodes around the mirror center, which realizes low-voltage driving with high-accuracy correction. The optimized models exhibited commendable correction abilities, achieving a unidirectional displacement of 5.74 μm with a driven voltage of 15 V. The voltage–displacement relationship demonstrated high linearity at 0.99. Furthermore, the deformable mirror's influence matrix was computed, aligning with the Zernike standard surface shape of the order 1–3. To quantify aberration correction capabilities, fitting residuals for both models were calculated. The results indicate an average removal of 96.8% of aberrations to the human eye. This underscores that the optimized model outperforms the classical model in correcting high-order aberrations. [ABSTRACT FROM AUTHOR]

Fourier ptychographic microscopy, as a computational imaging method, can reconstruct high-resolution images but suffers optical aberration, which affects its imaging quality. For this reason, this paper proposes a network model for simulating the forward imaging process in the Tensorflow framework using samples and coherent transfer functions as the input. The proposed model improves the introduced Wirtinger flow algorithm, retains the central idea, simplifies the calculation process, and optimizes the update through back propagation. In addition, Zernike polynomials are used to accurately estimate aberration. The simulation and experimental results show that this method can effectively improve the accuracy of aberration correction, maintain good correction performance under complex scenes, and reduce the influence of optical aberration on imaging quality. [ABSTRACT FROM AUTHOR]

A freeform off-axis three-mirror anastigmat (TMA) optical system with a large field of view (FOV) can obtain target image information with a larger spatial range and more spatial details, which is a development trend within the realm of space optics. The optical aberration increases exponentially with the FOV, resulting in a significant increase in error sensitivity for large-FOV optical systems. To address this issue, a method for designing optical systems with a large FOV and low error sensitivity is proposed. The FOV is gradually expanded from a small initial value in equal-length increments until it reaches the full FOV. At each step, the error sensitivity is recalculated and controlled to a lesser extent than in the previous step. In this design process, the freeform surface is used to correct the aberration and obtain low error sensitivity. An optical system with a focal length of 1000 mm and an F-number of 10 is used as an example, and the FOV is enlarged from 5° × 1° to 20° × 4°. The design results show that the modulation transfer function (MTF) of the optical system can reach 0.45@50 lp/mm, and the average wavefront aberration is 0.029λ. After four rounds of FOV expansion and error sensitivity optimization, the error sensitivity is reduced by 37.27% compared to the initial system, which verifies the correctness and practicality of the method. [ABSTRACT FROM AUTHOR]

This study proposes a parabolic off-axis reflective optical system design method to reduce the wave aberration of the optical system of a large aperture single star simulator and improve the optical system's imaging quality. Firstly, we determined the design indexes of the optical system of the large aperture single star simulator by analyzing the technical indexes of the star sensitizer and the development status of the single star simulator; secondly, the initial structural parameters of the optical system were calculated based on the theory of primary aberration; then, we carried out the design optimization of the optical system, the image quality evaluation, and the tolerance analysis using Zemax software; finally, the study tested the wave aberration of the optical system by using the four-dimensional interferometer and the standard mirror together. The simulation results of the optical system are as follows: in the entire field of view, the aberration of the optical system is far less than 0.002%, the modulation transfer function (MTF) reaches the diffraction limit, and the maximum wave aberration is 0.0324 λ. The experimental results are as follows: the maximum wave aberration of the optical system is 0.0337 λ, which is less than 1/25 λ, and it meets the requirements of the index. The simulation and experimental results show that the optical system of the large aperture single star simulator designed by this method has good imaging quality and a simple system structure. [ABSTRACT FROM AUTHOR]

We report an extensive numerical study and supporting experimental results on the spectral characterization of optical aberrations in macroscopic fluidic lenses with tunable focal distance and aperture shape. By using a Shack-Hartmann wavefront sensor, we experimentally reconstruct the near-field wavefront transmitted by the fluidic lenses, and we characterize the chromatic aberrations in terms of Zernike polynomials in the visible range. Moreover, we further classify the spectral response of the lenses using clustering techniques, in addition to correlation and convolution measurements. Experimental results are in agreement with numerical results based on our theoretical model of the nonlinear deformation of thin elastic membranes. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the spherical aberration (SA) in different corneal areas before and after femtosecond laser-assisted in situ keratomileusis (fLASIK) and transepithelial photorefractive keratectomy (tPRK), with the goal of identifying the limitations of and potential improvements in using SA within a 6 mm area. The study included 62 patients who underwent fLASIK and tPRK. Complete eye examinations including keratometry, corneal epithelial thickness, central corneal thickness, and topography were performed preoperatively and postoperatively. Anterior, posterior, and total corneal aberrations were measured preoperatively and three months postoperatively, with pupil diameters ranging from 2 to 8 mm. In the fLASIK group, compared to the preoperative SA, the anterior and total SA increased postoperatively in the 6 and 7 mm areas. In the tPRK group, meanwhile, the anterior and total SA of the 5 mm or larger areas increased postoperatively. An area of 6 mm or larger showed an increase in correlation with the changes in Q value and refractive correction. As the corneal SA and asphericity in the 6 mm zone cannot specifically demonstrate the status of areas smaller than 6 mm or changes in the optical zone after laser refractive surgery, comparison with normal values in various areas of the cornea is necessary. [ABSTRACT FROM AUTHOR]

Aiming at the problem that traditional design methods make it difficult to control the polarization aberration distribution of optical systems quickly and accurately, this study proposes an automatic optimization design method for polarization optical systems based on deep learning. The unsupervised training model based on ray tracing and polarized ray tracing was constructed by learning the reference lens structural feature data from the optical lens library, and the generalization ability of the deep neural network model was improved to achieve the automatic optimization design of the polarized optical system. The design results show that the optical system structure optimized by the network model is close to the reference lens in the full field of view and the full spectrum and that the optical system structure can be designed for different focal length requirements. The success rate of 1 million groups of initial structures designed is better than 96.403%, and the polarization effect of the optical system is effectively controlled. The proposed deep learning approach to optical design provides a new solution for future complex optical systems and also provides an effective way to improve the design accuracy of special optical systems such as polarization optical systems. [ABSTRACT FROM AUTHOR]

The optical quality of an image depends on both the optical properties of the imaging system and the physical properties of the medium the light passes while travelling from the object to the image plane. The computation of the point spread function (PSF) associated to the optical system is often used to assess the image quality. In a non-ideal optical system, the PSF is affected by aberrations that distort the final image. Moreover, in the presence of turbid media, the scattering phenomena spread the light at wide angular distributions that contribute to reduce contrast and sharpness. If the mathematical degradation operator affecting the recorded image is known, the image can be restored through deconvolution methods. In some scenarios, no (or partial) information on the PSF is available. In those cases, blind deconvolution approaches arise as useful solutions for image restoration. In this work, a new blind deconvolution method is proposed to restore images using spherical aberration (SA) and scatter-based kernel filters. The procedure was evaluated in different microscopy images. The results show the capability of the algorithm to detect both degradation coefficients (i.e., SA and scattering) and to restore images without information on the real PSF. [ABSTRACT FROM AUTHOR]

In single-molecule orientation localization microscopy, valuable information about the orientation and longitudinal position of each molecule is often encoded in the shape of the point spread function (PSF). Yet, this shape can be significantly affected by aberrations and other imperfections in the imaging system, leading to an erroneous estimation of the measured parameters. A basic solution is to model the aberrations as a scalar mask in the pupil plane that is characterized through phase retrieval algorithms. However, this approach is not suitable for cases involving polarization-dependent aberrations, introduced either through unintentional anisotropy in the elements or by using birefringent masks for PSF shaping. Here, this problem is addressed by introducing a fully vectorial model in which the polarization aberrations are represented via a spatially dependent Jones matrix, commonly used to describe polarization-dependent elements. It is then shown that these aberrations can be characterized by a set of PSF measurements at varying focal planes and for various polarization projections. This PZ-stack of PSFs, which contains diversity in both phase and polarization projection, is used in a phase retrieval algorithm based on nonlinear optimization to determine the aberrations. This methodology is demonstrated with numerical simulations and experimental measurements. The pyPSFstack software developed for modeling and characterization is made freely available. [ABSTRACT FROM AUTHOR]

Background: This study aimed to compare the corneal high-order aberrations and surgically induced astigmatism between the clear corneal incision and limbus tunnel incision for posterior chamber implantable collamer lens (ICL/TICL) implantation. Methods: A total of 127 eyes from 73 myopic patients underwent ICL V4c implantation, with 70 eyes receiving clear corneal incisions and 57 eyes receiving limbus tunnel incisions. The anterior and back corneal surfaces were measured and the Root Mean Square of all activated aberrations (TRMS) was calculated, including higher-order aberration (HOA RMS), spherical aberration Z40, coma coefficients (Coma RMS) Z3−1 Z31, and surgically induced astigmatism (SIA). The measurements were taken preoperatively and postoperatively at 1 day, 1 week, and 1, 3, and 6 months. In this study, the corneal higher-order aberration was estimated as the Zernike coefficient calculated up to 5th order. The measurements were taken at a maximum diameter of 6.5 mm using Pentacam. Results: One week after the operation, the corneal back Z31 of the clear corneal incision group was 0.06 ± 0.06, while the limbus tunnel incision group showed a measurement of 0.05 ± 0.06 (p = 0.031). The corneal back Z40 of the clear corneal incision group was -0.02 ± 0.25, compared to -0.04 ± 0.21 in the limbus tunnel incision group (p = 0.01). One month after the operation, the corneal back SIA of the clear corneal incision group was 0.11 ± 0.11, compared to 0.08 ± 0.11of the limbus tunnel incision group (p = 0.013), the corneal total SIA of the clear corneal incision group was 0.33 ± 0.30, compared to 0.15 ± 0.16 in the limbus tunnel incision group (p = 0.004); the clear corneal incision group exhibited higher levels of back astigmatism and total SIA than the limbus tunnel incision in the post-operation one month period. During the 6- month post-operative follow-up period, no significant difference in Z31, Z40, and other HOA RMS data was observed between the two groups. The total SIA of the corneal incision group and the limbus tunnel incision group were 0.24 ± 0.14 and 0.33 ± 0.32, respectively (p = 0.393), showing no significant difference between the two groups 6 months after the operation. Conclusion: Our data showed no significant difference in the high-order aberration and SIA between clear corneal incision and limbus tunnel incision up to 6 months after ICL-V4c implantation. [ABSTRACT FROM AUTHOR]

The multi-beam array stitching test system (MASTS) based on the Hartmann principle is employed to measure the aberrations in large-aperture optical systems. As each small-aperture and ideal parallel beam traverses the optical system, it is converged into a spot at the focal plane of the optical system. The centroid position of the spot contains the information about the wavefront slope of the sub-aperture at that specific location in the optical system. Scanning the optical system with this small-aperture beam across the entire aperture of the optical system, we can yield the aberration information to be tested. To mitigate pointing errors induced by scanning motion and accurately obtain the aberration signals of the optical system, nine beams are integrated into a 3 × 3 multi-beam array system, and their directions are aligned to be identical. However, achieving complete alignment in the same direction for all nine beams is a challenging task, resulting in errors due to their pointing differences within the array. This paper introduces an iterative algorithm designed to obtain high-precision multi-beam pointing errors and to reconstruct the wavefront of the optical system under test. This enables a more accurate measurement of wavefront aberrations in the optical system to be tested. Firstly, simulation models were implemented to validate the algorithm's feasibility. Additionally, a scanning optical measurement system with a multi-beam array was developed in our lab, and the iterative algorithm was applied to process our experimental data. The results were then compared with interferometer data, demonstrating that our algorithm is feasible for MASTS to measure aberrations in large-aperture optical systems with high accuracy. [ABSTRACT FROM AUTHOR]

We present estimated images of a hypothetical satellite system in the presence of Seidel aberrations. We exemplified the effects of defocus, spherical, coma, astigmatism, field curvature, and distortion aberrations. Our analysis methods allow the investigation of aberration effects individually and in any combined form. Thereby, we introduce a potentially rich analysis dimension for the imaging chain, image processing, and image quality analyses. For a number of degrees of aberrations, we provide image estimates, show and quantify how individual (field‐dependent) aberrations would introduce degradations on the satellite images. We got correlation coefficient values for defocus, spherical, coma, astigmatism, field curvature, and distortion aberrations as 0.69, 0.71, 0.66, 0.79, 0.76, and 0.60, respectively. Thereby, we identfied the significance order of Seidel aberrations for this system by using image simulations and image similarity measures. [ABSTRACT FROM AUTHOR]

We present a remote focusing optical tweezer utilizing a 4f symmetrical optical system to compensate the high-order aberration during annular light refocusing. The position of the optical trap can be adjusted beyond the range of one hundred micrometers in the axial direction by means of tuning the position of the mirror placed in the focal region of the illumination objective lens. This optical tweezer can be combined with a sectioning microscope to realize three-dimensional (3D) imaging, e.g., a confocal microscope using a single water immersion objective lens. All optical elements are placed in one side of the sample, which is very useful for application in fields such as radiation biology, where radiation or magnetism disturbance must be introduced on the other side of the sample. In the experiment, a 10 µm diameter silicon dioxide microsphere and pollen cells immersed in the water are translated along the axis using the optical tweezer and, meanwhile, the sectioning images are obtained using the confocal microscope. [ABSTRACT FROM AUTHOR]

Copyright of Arquivos Brasileiros de Oftalmologia is the property of Arquivos Brasileiros de Oftalmologia and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Visualization of axons and dendritic spines is crucial in neuroscience research. However, traditional microscopy is limited by diffraction-limited resolution and shallow imaging depth, making it difficult to study neuronal dynamics. Two-photon multifocal structured illumination microscopy (2P-MSIM) provides super-resolution imaging along with a reasonably good penetration, but it is vulnerable to optical aberrations in deep tissues. Herein we present a novel non-inertial scanning 2P-MSIM system incorporated with adaptive optics (AO) which allows for super-resolution imaging with effective aberration correction. Our strategy is designed to correct both laser and fluorescence paths simultaneously using a spatial light modulator and a deformable mirror respectively, providing better results than the individual path corrections. The successful implementation of adaptive optical two-photon multifocal structured illumination microscopy (AO 2P-MSIM) has allowed for the super-resolution imaging of neuronal structures in a mouse brain slice at great depths and dynamic morphological characteristics of zebrafish motoneurons in vivo. [ABSTRACT FROM AUTHOR]

Optical knots and links are nontrivial three-dimensional topologies consisting of trajectories of phase or polarisation singularities. They are theoretically predicted and experimentally observed in paraxial and nonparaxial regimes and in random and speckle fields. The topological nature of optical knots suggests that environmental disturbances should not alter their topology, hence becoming a resilient vector of information. However, the robustness of optical knots under typical disturbances encountered in optical experiments has not been investigated. Here, we provide the experimental analysis of the effects of optical phase aberrations on optical knots and links. We demonstrate that Hopf links, trefoil and cinquefoil knots are robust to misalignment and phase aberrations. The observed knots are obliterated for high aberration strengths and defining apertures close to the characteristic optical beam size. Our observations indicate these photonic topological structures as viable alternatives for both classical and quantum information processing noisy channels, where optical modes are not applicable. Optical knots are three-dimensional topologies made of singularities in phase or polarization, but the robustness of their topological structure under optical disturbances is still unexplored. The authors experimentally verify the robustness of optical knots to environmental disturbances, indicating them as a viable vector of information. [ABSTRACT FROM AUTHOR]

The aspheric surface is a commonly used method to improve the imaging quality of the fisheye lens, but it is difficult to determine the position and initial value. Based on the wave aberration theory of the plane-symmetric optical system, a method of using an aspheric surface to design a fisheye lens is proposed, which can quickly determine the appropriate aspheric surface to improve the imaging performance. First, the wave aberration of each optical surface of the fisheye lens is calculated and its aberration characteristics are analyzed. Then, a numerical evaluation function is reported based on the aberration distribution of the fisheye lens on the image plane. According to the functional relationship between the evaluation function and the aspheric coefficient, the position of the aspheric surface and the initial value of the aspheric coefficient can be calculated. Finally, the adaptive and normalized real-coded genetic algorithm is used as the evaluation function to optimize the fisheye lens using an aspheric surface. The proposed method can provide an effective solution for designing a fisheye lens using an aspheric surface. [ABSTRACT FROM AUTHOR]

Adaptive optics normally concerns the feedback correction of phase aberrations. Such correction has been of benefit in various optical systems, with applications ranging in scale from astronomical telescopes to super-resolution microscopes. Here we extend this powerful tool into the vectorial domain, encompassing higher-dimensional feedback correction of both polarisation and phase. This technique is termed vectorial adaptive optics (V-AO). We show that V-AO can be implemented using sensor feedback, indirectly using sensorless AO, or in hybrid form combining aspects of both. We validate improvements in both vector field state and the focal quality of an optical system, through correction for commonplace vectorial aberration sources, ranging from objective lenses to biological samples. This technique pushes the boundaries of traditional scalar beam shaping by providing feedback control of extra vectorial degrees of freedom. This paves the way for next generation AO functionality by manipulating the complex vectorial field. [ABSTRACT FROM AUTHOR]