Search

In dental practice, Regenerative Endodontic Treatment (RET) is applied as an alternative to classical endodontic treatments of immature necrotic teeth. This procedure, also known as dental pulp revitalization, relies on the formation of a blood clot inside the root canal leading to the formation of a reparative vascularized tissue similar to dental pulp, which would provide vitality to the affected tooth. Despite the benefit of this technique, it lacks reproducibility due to the fast degradation and poor mechanical properties of blood clots. This work presents a method for constructing a fibrinogen-blood hydrogel that mimics the viscoelastic properties of human dental pulp while preserving the biological properties of blood for application in RET. By varying the blood and fibrinogen concentrations, gels with different biomechanical and biological properties were obtained. Rheology and atomic force microscopy (AFM) were combined to study the viscoelastic properties. AFM was used to evaluate the elasticity of human dental pulp. The degradation and swelling rates were assessed by measuring weight changes. The biomimetic properties of the gels were demonstrated by studying the cell survival and proliferation of dental pulp cells (DPCs) for 14 days. The formation of an extracellular matrix (ECM) was assessed by multiphoton microscopy (MPM). The angiogenic potential was evaluated by an ex vivo aortic ring assay, in which the endothelial cells were observed by histological staining after migration. The results show that the Fbg-blood gel prepared with 9 mg ml -1 fibrinogen and 50% blood of the Fbg solution volume has similar elasticity to human dental pulp and adequate degradation and swelling rates. It also allows cell survival and ECM secretion and enhances endothelial cell migration and formation of neovessel-like structures.

Based on the concept of tissue engineering (Cells-Scaffold-Bioactive molecules), regenerative endodontics appeared as a new notion for dental endodontic treatment. Its approaches aim to preserve dental pulp vitality (pulp capping) or to regenerate a vascularized pulp-like tissue inside necrotic root canals by cell homing. To improve the methods of tissue engineering for pulp regeneration, numerous studies using in vitro, ex vivo, and in vivo models have been performed. This review explores the evolution of laboratory models used in such studies and classifies them according to different criteria. It starts from the initial two-dimensional in vitro models that allowed characterization of stem cell behavior, through 3D culture matrices combined with dental tissue and finally arrives at the more challenging ex vivo and in vivo models. The travel which follows the elaboration of such models reveals the difficulty in establishing reproducible laboratory models for dental pulp regeneration. The development of well-established protocols and new laboratory ex vivo and in vivo models in the field of pulp regeneration would lead to consistent results, reduction of animal experimentation, and facilitation of the translation to clinical practice., (© 2023. The Author(s).)

With their potent regenerative and protective capacities, stem cell-derived conditioned media emerged as an effective alternative to cell therapy, and have a prospect to be manufactured as pharmaceutical products for tissue regeneration applications. Our study investigates the neuroregenerative potential of human dental pulp cells (DPCs) conditioned medium (CM) and defines an optimization strategy of DPC-CM for enhanced neuronal outgrowth. Primary sensory neurons from mouse dorsal root ganglia were cultured with or without DPC-CM, and the lengths of βIII-tubulin positive neurites were measured. The impacts of several manufacturing features as the duration of cell conditioning, CM storage, and preconditioning of DPCs with some factors on CM functional activity were assessed on neurite length. We observed that DPC-CM significantly enhanced neurites outgrowth of sensory neurons in a concentration-dependent manner. The frozen storage of DPC-CM had no impact on experimental outcomes and 48 h of DPC conditioning is optimal for an effective activity of CM. To further understand the regenerative feature of DPC-CM, we studied DPC secretome by human growth factor antibody array analysis and revealed the presence of several factors involved in either neurogenesis, neuroprotection, angiogenesis, and osteogenesis. The conditioning of DPCs with the B-27 supplement enhanced significantly the neuroregenerative effect of their secretome by changing its composition in growth factors. Here, we show that DPC-CM significantly stimulate neurite outgrowth in primary sensory neurons. Moreover, we identified secreted protein candidates that can potentially promote this promising regenerative feature of DPC-CM., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Objective: A large number of digital tools supporting students have emerged over recent years which are encouraged in tutoring. A study conducted at the University of Montpellier (France) among 3rd, 4th, and 5th year dentistry students aimed primarily to identify the type of pedagogical support the students preferred according to their discipline. The secondary aim was to evaluate the student satisfaction after establishing a new pedagogical support., Materials and Methods: A total of 165 questionnaires were completed. The main questions concerned pedagogical use of information technology and multimedia tools, choice of dentistry disciplines most justifying their use, and pedagogical gaps in these disciplines. Next, a program of pedagogical videos was developed for the most corresponding discipline. A satisfaction survey was finally conducted., Results: Nearly 95.7% of students found online classes and E-learning via the virtual learning environment useful, with the most requested type being video. Demand was stronger in conservative dentistry and endodontics (27%), prosthetics (19%), and periodontology (18%). The most apprehended disciplines were endodontics in the 3rd year, endodontics and prosthetics in the 4th year, and prosthetics in the 5th year. Regarding satisfaction, 100% of students appreciated these videos and 99.4% considered they fulfilled expectations., Conclusion: All students requested videos, especially for clinical subjects such as endodontics. With digital technology, our world is experiencing a technological revolution resulting in many daily life changes. With students evolving in a digitally saturated society, our ways of learning and teaching need rethinking. Digital technology can help improve learning effectiveness and develop pedagogical practices more adapted to today's students., Competing Interests: None declared., (Dental Investigation Society.)

A new strategy to improve silicon-based endodontic treatment tightness by dentine hydrophobization is presented in this work: root dentine was silanized to obtain a hydrophobic dentine-sealer interface that limits fluid penetration. This strategy was based on the grafting of aliphatic carbon chains on the dentine through a silanization with the silane end groups [octadecyltrichlorosilane (OTS) and octadecyltriethoxysilane]. Dentine surface was previously pretreated, applying ethylenediaminetetraacetic acid and sodium hypochlorite, to expose hydroxyl groups of collagen for the silane grafting. Collagen fibers exposure after pretreatment was visible with scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy showed their correct exposition for the silanization (amide I and II, with 1630, 1580, and 1538 cm⁻¹ peaks corresponding to the vibration of C=O and C--N bonds). The grafting of aliphatic carbon chains was confirmed by FTIR (peaks at 2952 and 2923 cm⁻¹ corresponding to the stretching of C--H bonds) and by the increasing of the water contact angle. The most efficient hydrophobization was obtained with OTS in ethyl acetate, with a water contact angle turning from 51° to 109°. Gas and liquid permeability tests showed an increased seal tightness after silanization: the mean gas and water flows dropped from 2.02 × 10⁻⁸ to 1.62 × 10⁻⁸ mol s⁻¹ and from 10.8 × 10⁻³ to 5.4 × 10⁻³ µL min⁻¹, respectively. These results show clear evidences to turn hydrophilic dentine surface into a hydrophobic surface that may improve endodontic sealing., (Copyright © 2013 Wiley Periodicals, Inc.)

Objective: This study evaluated the hydrophobicity of dentin surfaces that were modified through chemical silanization with octadecyltrichlorosilane (OTS)., Material and Methods: An in vitro experimental study was performed using 40 human permanent incisors that were divided into the following two groups: non-silanized and silanized. The specimens were pretreated and chemically modified with OTS. After the chemical modification, the dentin hydrophobicity was examined using a water contact angle measurement (WCA). The effectiveness of the modification of hydrophobicity was verified by the fluid permeability test (FPT)., Results and Conclusions: Statistically significant differences were found in the values of WCA and FPT between the two groups. After silanization, the hydrophobic intraradicular dentin surface exhibited in vitro properties that limit fluid penetration into the sealed root canal. This chemical treatment is a new approach for improving the sealing of the root canal system.

Background: Most dental implant systems are presently made of two pieces: the implant itself and the abutment. The connection tightness between those two pieces is a key point to prevent bacterial proliferation, tissue inflammation and bone loss. The leak has been previously estimated by microbial, color tracer and endotoxin percolation., Methods: A new nitrogen flow technique was developed for implant-abutment connection leakage measurement, adapted from a recent, sensitive, reproducible and quantitative method used to assess endodontic sealing., Results: The results show very significant differences between various sealing and screwing conditions. The remaining flow was lower after key screwing compared to hand screwing (p = 0.03) and remained different from the negative test (p = 0.0004). The method reproducibility was very good, with a coefficient of variation of 1.29%., Conclusions: Therefore, the presented new gas flow method appears to be a simple and robust method to compare different implant systems. It allows successive measures without disconnecting the abutment from the implant and should in particular be used to assess the behavior of the connection before and after mechanical stress.