Search

In this paper, three types of horizontal ground heat exchangers (GHEs) such as U-tube, spiral, and slinky were numerically analyzed to investigate their thermal performance in cooling mode for 7 days of continuous operation with specific boundary conditions where a rectangular trench of 5 m in length, 2 m in width, and 5 m in depth served as the basis for the modeling of each heat exchanger. The pipe material was selected to be high density polyethylene for higher durability and corrosion resistance, as well as the soil and working fluid, which were clay and water. To confirm the accuracy of simulation results and reduce the computational time, a mesh independence test was performed, and simulation models were validated. There were four types of modifications, and in all of the cases, slinky GHE has better thermal performance. For instance, the heat exchange rate per unit trench length of slinky GHE was 20.72 W/m, which is higher than U-tube and spiral tube with a heat exchange rate of 9.75 and 13.62 W/m, which is of maximum 53% and 28% than U tube GHE, respectively, for the same pipe wall thickness and different material volumes of U-tube, spiral, and slinky GHEs. The pressure drop of slinky GHE is also higher (maximum 87% higher than U tube). To balance the heat exchange rate and pressure drop, the thermal performance capability (TPC) was examined. The slinky GHE has the highest thermal performance capability for all the cases. From the energy balance point, the TPC valued a maximum of 1.72 for the same material volume and different pipe wall thickness. The effectiveness was investigated to examine the heat exchange rate with different ground temperatures, and the slinky GHE showed higher effectiveness than spiral and U-tube GHEs. Finally, the thermal performance of slinky horizontal GHE was examined with different trench lengths to investigate the excavation work reduction with reduced trench length. With the decrease in trench length, the heat exchange rate and excavation work also decreased. The heat exchange rate of slinky horizontal GHEs with trench lengths of 1.5 and 1 m remained better than that of spiral and U-tube horizontal GHEs with a trench length of 3.5 m.

Organochlorine pesticides (OCPs) are persistent organic compounds found in aquatic environments worldwide. A well-validated and well-established analytical method is crucial for detecting OCPs in the environment. In this study, an analytical method for quantifying OCPs in water was developed and evaluated. Here, the range of linearity, reproducibility, uncertainty, specificity, method detection limits (MDL), and special emphasis on detection and quantitation limits were assessed. Recovery studies were performed to measure the accuracy and precision of the method. This method exhibited excellent linearity in the range of 2.5–20 μg/L for all compounds. As none of the targeted compounds was detected in the chromatograms of the blank sample with no baseline noise, the limits of detection (LOD) and limits of quantification (LOQ) were determined using the linear regression method, external calibration curve slope, and laboratory fortified blank-based detection. All compounds showed different LOD and LOQ values, depending on the approach used. In particular, endosulfan sulfate, methoxychlor, endrin ketone, H. epoxide, heptachlor, and 4,4ʹ-DDT exhibited high detection limits. The recovery percentage of the 15 compounds at 5 μg/L spiked concentration was between 50 and 150 %, which is consistent with the accuracy of the APHA method. Except for endosulfan sulfate, the relative standard deviations of all other compounds were below 20 %, indicating good precision. This method has also been applied to real water samples. This validation technique is reliable, sensitive, simple, rapid, easy to comprehend, and reproducible. The application of this method in the real water samples was also conducted. Only α-BHC and γ-Chlordane were detected in the water sample.

The use of additive manufacturing, or 3D printing, has progressed beyond prototyping to produce intricate and valuable finished goods. The potential of additive manufacturing has increased across numerous industries due to the expansion of materials, such as high-performance metals and polymers, and advancements in machine capabilities, such as multi-material printing. By enabling complex designs, reduced waste, and quick production, it has the potential to revolutionize the consumer goods, healthcare, automotive manufacturing, and aerospace industries. The development of specialized scaffolds has been made possible by the precise control that additive manufacturing provides over the internal structure of porous materials. This technology has revolutionized tissue engineering and regenerative medicine. Furthermore, it has made it possible to create individualized implants and prosthetics that improve patient comfort and outcomes in orthopedic and dental applications. Also, it provides flexibility in design and customization for individualized implants and prosthetics in orthopedic and dental applications. Design flexibility, waste reduction, improved biocompatibility, quick prototyping, and cost-effectiveness are benefits of additive manufacturing for implants. For personalized healthcare, regenerative medicine, and better patient outcomes, additive manufacturing holds promise as the technology develops with further advancements in printing speed, resolution, and scalability.

Concentration, source, ecological and health risks of sixteen polycyclic aromatic hydrocarbons (PAHs) were estimated for water and sediment samples of two urban rivers namely Buriganga River (BR) and Dhaleswari River (DR). The mean concentration of ∑PAHs in BR water and sediment were 9619.2 ngL−1 and 351.6 ngg−1, respectively. Furthermore, the average PAH concentrations detected in DR water and sediment were 1979.1 ngL−1 and 792.9 ngg−1, respectively. The composition profile showed that 3-ring PAHs were dominant in the water matrix; however, 5-ring PAHs were prevalent in the sediment samples of both rivers. Sources apportion study of PAHs indicated that mixed combustion and petroleum sources are responsible for PAHs contamination in the rivers. Ecological risk study of water suggested that the aquatic lives of both rivers are threatened by Fla, BbF, BkF, DahA, and IcdP, as presented above the threshold level. Comparison with sediment quality guidelines (SQGs) indicated that adverse effects might cause occasionally in the sediment ecosystem in DR at certain sampling sites for Nap, Acy, Fl, Phe, Ant, Pyr, Chr, BaP, and DahA. On the other hand, the presence of Nap, Acy and DahA might occasionally cause adverse biological effects in the BR sediment ecosystem. Estimated hazard quotient (HI > 1) and carcinogenic risk (CRtotal > 10−4) values indicated that local inhabitants living in the vicinity of the rivers are prone to high health risks.

In this study, a carbon-based adsorbent was developed from waste newspaper through pyrolysis at 800 °C to evaluate the removal efficiency of polycyclic aromatic hydrocarbons (Benzo[ghi]perylene (BghiP) and Indeno [1,2,3-cd] pyrene (IP)) from wastewater. The surface area of the developed adsorbent was estimated at 509.247m2g-1 which allowed the adsorption of the PAHs from wastewater. The maximum adsorption capacity was estimated at 138.436 μg g−1 and 228.705 μg g−1 for BghiP and IP, respectively and the highest removal efficiency was observed at pH 2. Around 91% removal efficiency was observed at pH 7 for both pollutants. Experimental adsorption data were fit for pseudo-second-order kinetics and Langmuir isotherm models, which demonstrate electrostatic interaction, monolayered deposition, hydrogen bonding, and π-π interaction between adsorbate and adsorbent which play a significant role in adsorption. The regeneration study described that the developed adsorbent could be able to intake 52.75% BghiP and 48.073% IP until the 8th and 6th cycles, respectively. The removal efficiency of the adsorbent in the real sample was also evaluated. This study will provide a method to convert waste material into adsorbent and will remove PAHs from wastewater as a function of pollutant mitigation and waste management.

Introduction: Copy number variations (CNVs) play a critical role in the pathogenesis of neurodevelopmental disorders (NDD) among children. In this study, we aim to identify clinically relevant CNVs, genes and their phenotypic characteristics in an ethnically underrepresented homogenous population of Bangladesh.Methods: We have conducted chromosomal microarray analysis (CMA) for 212 NDD patients with male to female ratio of 2.2:1.0 to identify rare CNVs. To identify candidate genes within the rare CNVs, gene constraint metrics [i.e., “Critical-Exon Genes (CEGs)”] were applied to the population data. Autism Diagnostic Observation Schedule-Second Edition (ADOS-2) was followed in a subset of 95 NDD patients to assess the severity of autism and all statistical tests were performed using the R package.Results: Of all the samples assayed, 12.26% (26/212) and 57.08% (121/212) patients carried pathogenic and variant of uncertain significance (VOUS) CNVs, respectively. While 2.83% (6/212) patients’ pathogenic CNVs were found to be located in the subtelomeric regions. Further burden test identified females are significant carriers of pathogenic CNVs compared to males (OR = 4.2; p = 0.0007). We have observed an increased number of Loss of heterozygosity (LOH) within cases with 23.85% (26/109) consanguineous parents. Our analyses on imprinting genes show, 36 LOH variants disrupting 69 unique imprinted genes and classified these variants as VOUS. ADOS-2 subset shows severe social communication deficit (p = 0.014) and overall ASD symptoms severity (p = 0.026) among the patients carrying duplication CNV compared to the CNV negative group. Candidate gene analysis identified 153 unique CEGs in pathogenic CNVs and 31 in VOUS. Of the unique genes, 18 genes were found to be in smaller (

The corrosion of metals in acidic environments is a grave concern, with the conventional use of commercial corrosion inhibitors leading to environmental toxicity. To address this issue, non-toxic, cost-effective drugs that have a minimal impact on the environment have the potential to replace traditional toxic inhibitors. This study aims to evaluate the molecular orbital properties of benzimidazole-containing drugs such as omeprazole, esomeprazole, and pantoprazole, through density functional theory (DFT), to assess their ability to act as corrosion inhibitors and explore their mechanism of inhibition. The study found that all three compounds have the ability to form a barrier film on the metal surface, with omeprazole being slightly more reactive than the others. Omeprazole and esomeprazole were found to be softer than pantoprazole, indicating that they are more reactive towards the metal surface. The study also found that the active sites of all compounds are located in the benzimidazole ring along with the methyl and methoxy groups. Additionally, the inhibitor molecules are adsorbed onto the metal surface through the active sites by transferring their electrons towards the metal surface. The adsorption energy calculation indicates that Omeprazole and Pantoprazole, with more negative adsorption free energy, exhibit superior corrosion inhibition ability compared to Pantoprazole. Overall, the study provides valuable insights into the potential use of these drugs as effective corrosion inhibitors.

Abstract Collectively, rare genetic diseases affect a significant number of individuals worldwide. In this study, we have conducted whole-exome sequencing (WES) and identified underlying pathogenic or likely pathogenic variants in five children with rare genetic diseases. We present evidence for disease-causing autosomal recessive variants in a range of disease-associated genes such as DHH-associated 46,XY gonadal dysgenesis (GD) or 46,XY sex reversal 7, GNPTAB-associated mucolipidosis II alpha/beta (ML II), BBS1-associated Bardet–Biedl Syndrome (BBS), SURF1-associated Leigh Syndrome (LS) and AP4B1-associated spastic paraplegia-47 (SPG47) in unrelated affected members from Bangladesh. Our analysis pipeline detected three homozygous mutations, including a novel c. 863 G > C (p.Pro288Arg) variant in DHH, and two compound heterozygous variants, including two novel variants: c.2972dupT (p.Met991Ilefs*) in GNPTAB and c.229 G > C (p.Gly77Arg) in SURF1. All mutations were validated by Sanger sequencing. Collectively, this study adds to the genetic heterogeneity of rare genetic diseases and is the first report elucidating the genetic profile of (consanguineous and nonconsanguineous) rare genetic diseases in the Bangladesh population.

Objectives To assess the prevalence of noncommunicable disease (NCD) risk factors and the factors associated with the coexistence of multiple risk factors (≥ 2 risk factors) among adolescent boys and girls in Bangladesh. Methods Data on selected NCD risk factors collected from face to face interviews of 4,907 boys and 4,865 girls in the national Nutrition Surveillance round 2018–2019, was used. Descriptive analysis and multivariable logistic regression were performed. Results The prevalence of insufficient fruit and vegetable intake, inadequate physical activity, tobacco use, and being overweight/obese was 90.72%, 29.03%, 4.57%, and 6.04%, respectively among boys; and 94.32%, 50.33%, 0.43%, and 8.03%, respectively among girls. Multiple risk factors were present among 34.87% of boys and 51.74% of girls. Younger age (p < 0.001), non-slum urban (p < 0.001) and slum residence (p < 0.001), higher paternal education (p = 0.001), and depression (p < 0.001) were associated with the coexistence of multiple risk factors in both boys and girls. Additionally, higher maternal education (p < 0.001) and richest wealth quintile (p = 0.023) were associated with the coexistence of multiple risk factors in girls. Conclusion The government should integrate specific services into the existing health and non-health programs which are aimed at reducing the burden of NCD risk factors.

Pancreatic cancer is a very deadly disease with a 5-year survival rate, making it one of the leading causes of cancer-related deaths globally. Focal adhesion kinase 1 (FAK1) is a ubiquitously expressed protein in pancreatic cancer. FAK, a tyrosine kinase that is overexpressed in cancer cells, is crucial for the development of tumors into malignant phenotypes. FAK functions in response to extracellular signals by triggering transmembrane receptor signaling, which enhances focal adhesion turnover, cell adhesion, cell migration, and gene expression. The ligand-based drug design approach was used to identify potential compounds against the target protein, which included molecular docking: ADME (absorption, distribution, metabolism, and excretion), toxicity, molecular dynamics (MD) simulation, and molecular mechanics generalized born surface area (MM-GBSA). Following the retrieval of twenty hits, four compounds were selected for further evaluation based on a molecular docking approach. Three newly discovered compounds, including PubChem CID24601203, CID1893370, and CID16355541, with binding scores of −10.4, −10.1, and −9.7 kcal/mol, respectively, may serve as lead compounds for the treatment of pancreatic cancer associated with FAK1. The ADME (absorption, distribution, metabolism, and excretion) and toxicity analyses demonstrated that the compounds were effective and nontoxic. However, further wet laboratory investigations are required to evaluate the activity of the drugs against the cancer.

Abstract Background Genetic testing is becoming an essential tool for breast cancer (BC) diagnosis and treatment pathway, and particularly important for early detection and cancer prevention. The purpose of this study was to explore the diagnostic yield of targeted sequencing of the high priority BC genes. Methods We have utilized a cost-effective targeted sequencing approach of high priority actionable BC genes (BRCA1, BRCA2, ERBB2 and TP53) in a homogeneous patient cohort from Bangladesh (n = 52) by using tumor and blood samples. Results Blood derived targeted sequencing revealed 25.58% (11/43) clinically relevant mutations (both pathogenic and variants of uncertain significance (VUS)), with 13.95% (6/43) of samples carrying a pathogenic mutations. We have identified and validated five novel pathogenic germline mutations in this cohort, comprising of two frameshift deletions in BRCA2, and missense mutations in BRCA1, BRCA2 and ERBB2 gene respectively. Furthermore, we have identified three pathogenic mutations and a VUS within three tumor samples, including a sample carrying pathogenic mutations impacting both TP53 (c.322dupG; a novel frameshift insertion) and BRCA1 genes (c.116G > A). 22% of tissue samples had a clinically relevant TP53 mutation. Although the cohort is small, we have found pathogenic mutations to be enriched in BRCA2 (9.30%, 4/43) compare to BRCA1 (4.65%, 2/43). The frequency of germline VUS mutations found to be similar in both BRCA1 (4.65%; 2/43) and BRCA2 (4.65%; 2/43) compared to ERBB2 (2.32%; 1/43). Conclusions This is the first genetic study of BC predisposition genes in this population, implies that genetic screening through targeted sequencing can detect clinically significant and actionable BC-relevant mutations.

Malnutrition among adolescents is often associated with inadequate dietary diversity (DD). We aimed to explore the prevalence of inadequate DD and its socio-economic determinants among adolescent girls and boys in Bangladesh. A cross-sectional survey was conducted during the 2018–19 round of national nutrition surveillance in Bangladesh. Univariate and multivariable logistic regression was performed to identify the determinants of inadequate DD among adolescent girls and boys separately. This population-based survey covered eighty-two rural, non-slum urban and slum clusters from all divisions of Bangladesh. A total of 4865 adolescent girls and 4907 adolescent boys were interviewed. The overall prevalence of inadequate DD was higher among girls (55⋅4 %) than the boys (50⋅6 %). Moreover, compared to boys, the prevalence of inadequate DD was higher among the girls for almost all socio-economic categories. Poor educational attainment, poor maternal education, female-headed household, household food insecurity and poor household wealth were associated with increased chances of having inadequate DD in both sexes. In conclusion, more than half of the Bangladeshi adolescent girls and boys consumed an inadequately diversified diet. The socio-economic determinants of inadequate DD should be addressed through context-specific multisectoral interventions.

Background: Bangladesh continues to be one of the top ten countries with the highest burden of neonatal mortality. While, most of the neonatal deaths are preventable; health system delays, delayed identification of newborn danger signs, late diagnosis and initiation of treatment are claimed to be the main challenges. Objective: 1) to determine the level of knowledge among the recently delivered women (RDW) about newborn danger signs and 2) to distinguish the factors associated with ability of identifying the danger signs. Methods: A facility based cross-sectional study was conducted in three sub-district hospitals of Bangladesh among 135 RDW between 1 January 2015 and 30 April 2015. Seven key danger signs were identified, and responses were categorized accordingly. Bivariable logistic regression was conducted to determine the likelihood of the association of factors with danger signs identification. Results: About 51% of RDW could identify one key danger sign. Knowledge on "fever'' was the most commonly known danger sign (65%). Middle age (OR 1.67, 95% CI: 1.09 - 2.18), high education (OR 2.37, 95% CI: 1.46 - 2.77), increased parity (OR 1.91, 95% CI: 1.17 - 2.89), and previous hospital delivery (OR 1.79, 95% CI: 1.14 - 2.68) were found associated with the knowl­edge of the danger signs. Conclusion: The findings indicate the immediate need to enhance health education among the RDW about newborn danger signs before their hospital discharge. Community based health education programs can be a cost effective intervention to increase awareness and early recognition of neonatal danger signs.