Search

Objectives: The complexity of aortic arch reconstruction due to diverse 3-dimensional geometrical abnormalities is a major challenge. This study introduces 3-dimensional printed tissue-engineered vascular grafts, which can fit patient-specific dimensions, optimize hemodynamics, exhibit antithrombotic and anti-infective properties, and accommodate growth., Methods: We procured cardiac magnetic resonance imaging with 4-dimensional flow for native porcine anatomy (n = 10), from which we designed tissue-engineered vascular grafts for the distal aortic arch, 4 weeks before surgery. An optimal shape of the curved vascular graft was designed using computer-aided design informed by computational fluid dynamics analysis. Grafts were manufactured and implanted into the distal aortic arch of porcine models, and postoperative cardiac magnetic resonance imaging data were collected. Pre- and postimplant hemodynamic data and histology were analyzed., Results: Postoperative magnetic resonance imaging of all pigs with 1:1 ratio of polycaprolactone and poly-L-lactide-co-ε-caprolactone demonstrated no specific dilatation or stenosis of the graft, revealing a positive growth trend in the graft area from the day after surgery to 3 months later, with maintaining a similar shape. The peak wall shear stress of the polycaprolactone/poly-L-lactide-co-ε-caprolactone graft portion did not change significantly between the day after surgery and 3 months later. Immunohistochemistry showed endothelization and smooth muscle layer formation without calcification of the polycaprolactone/poly-L-lactide-co-ε-caprolactone graft., Conclusions: Our patient-specific polycaprolactone/poly-L-lactide-co-ε-caprolactone tissue-engineered vascular grafts demonstrated optimal anatomical fit maintaining ideal hemodynamics and neotissue formation in a porcine model. This study provides a proof of concept of patient-specific tissue-engineered vascular grafts for aortic arch reconstruction., Competing Interests: Drs Johnson, Krieger, and Hibino are inventors listed on international patent WO/2017/035500Al (Patient-Specific Tissue Engineered Vascular Graft Utilizing Electrospinning). Dr Johnson is an equity holder in Nanofiber Solutions. All other authors reported no conflicts of interest. The Journal policy requires editors and reviewers to disclose conflicts of interest and to decline handling manuscripts for which they may have a conflict of interest. The editors and reviewers of this article have no conflicts of interest., (© 2024 The Author(s).)

Background: Patient-specific, 3-dimensional printed, tissue engineered vascular grafts (3DTEVGs) are manufactured to optimize hemodynamic performance and to accommodate growth. We evaluate growth outcomes of 3DTEVGs compared with standard grafts for pulmonary artery reconstruction in porcine models., Methods: Magnetic resonance imaging (MRI) with 4-dimensional flow data was acquired in porcine models (n = 8). 3DTEVGs guided in design by computational flow dynamics were implanted (n = 4), with polytetrafluorethylene grafts used as controls (n = 4). Postoperative MRI and histologic features of explanted grafts were evaluated after 10 weeks., Results: All pigs survived, with evidence of patent grafts on postoperative MRI. Graft inner diameter changes were 0.47 ± 2.31 mm in 3DTEVGs and -4.61 ± 2.15 mm in controls ( P  = .018). Mean main pulmonary artery wall shear stress was significantly lower in 3DTEVGs (7.12 ± 4.21 Pa) than in controls (18.15 ± 8.37 Pa; P  = .0396). Histologic evaluation of 3DTEVGs showed a single layer of endothelial cells, an organized smooth muscle layer, and collagen deposition with a remaining scaffold area of 21.37% ± 20.46%., Conclusions: Our patient-specific 3DTEVGs demonstrated optimal anatomic fit while maintaining ideal flow dynamics and promoting appropriate neovessel formation., (© 2023 The Authors.)

Objective: Many patients who require hemodialysis treatment will often require a prosthetic graft after multiple surgeries. However, the patency rate of grafts currently available commercially has not been satisfactory. Tissue engineering vascular grafts (TEVGs) are biodegradable scaffolds created to promote autologous cell proliferation and functional neotissue regeneration and, accordingly, have antithrombogenicity. Therefore, TEVGs can be an alternative prosthesis for small diameter grafts. However, owing to the limitations of the graft materials, most TEVGs are rigid and can easily kink when implanted in limited spaces, precluding future clinical application. Previously, we developed a novel corrugated nanofiber graft to prevent graft kinking. Reinforcement of these grafts to ensure their safety is required in a preclinical study. In the present study, three types of reinforcement were applied, and their effectiveness was examined using large animals., Methods: In the present study, three different reinforcements for the graft composed of corrugated poly-ε-caprolactone (PCL) blended with poly(L-lactide-co-ε-caprolactone) (PLCL) created with electrospinning were evaluated: 1) a polydioxanone suture, 2) a 2-0 polypropylene suture, 3) a polyethylene terephthalate/polyurethane (PET/PU) outer layer, and PCL/PLCL as the control. These different grafts were then implanted in a U-shape between the carotid artery and jugular vein in seven ovine models for a total of 14 grafts during a 3-month period. In evaluating the different reinforcements, the main factors considered were cell proliferation and a lack of graft dilation, which were evaluated using ultrasound examinations and histologic and mechanical analysis., Results: No kinking of the grafts occurred. Overall, re-endothelialization was observed in all the grafts at 3 months after surgery without graft rupture or calcification. The PCL/PLCL grafts and PCL/PLCL grafts with a polydioxanone suture showed high cell infiltration; however, they had become dilated 10 weeks after surgery. In contrast, the PCL/PLCL graft with the 2-0 suture and the PCL/PLCL graft covered with a PET/PU layer did not show any graft expansion. The PCL/PLCL graft covered with a PET/PU layer showed less cell infiltration than that of the PCL/PLCL graft., Conclusions: Reinforcement is required to create grafts that can withstand arterial pressure. Reinforcement with suture materials has the potential to maintain cell infiltration into the graft, which could improve the neotissue formation of the graft., (© 2022 by the Society for Vascular Surgery. Published by Elsevier Inc.)