Search

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Overexpressed or underexpressed as well as mutated nucleic acids have been implicated in many diseases. Therefore, nucleic acid tests (NATs) are extremely important. Inspired by intracellular DNA replication and RNA transcription, in vitro NATs have been extensively developed to improve the detection specificity, sensitivity, and simplicity. The principles of NATs can be in general classified into three categories: nucleic acid hybridization, thermal-cycle or isothermal amplification, and signal amplification. Driven by pressing needs in clinical diagnosis and prevention of infectious diseases, NATs have evolved to be a rapidly advancing field. During the past ten years, an explosive increase of research interest in both basic research and clinical translation has been witnessed. In this review, we aim to provide comprehensive coverage of the progress to analyze nucleic acids, use nucleic acids as recognition probes, construct detection devices based on nucleic acids, and utilize nucleic acids in clinical diagnosis and other important fields. We also discuss the new frontiers in the field and the challenges to be addressed.

The chemical composition of cells at the molecular level determines their growth, differentiation, structure, and function. Probing this composition is powerful because it provides invaluable insight into chemical processes inside cells and in certain cases allows disease diagnosis based on molecular profiles. However, many techniques analyze fixed cells or lysates of bulk populations, in which information about dynamics and cellular heterogeneity is lost. Recently, nucleic-acid-based probes have emerged as a promising platform for the detection of a wide variety of intracellular analytes in live cells with single-cell resolution. Recent advances in this field are described and common strategies for probe design, types of targets that can be identified, current limitations, and future directions are discussed., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Chemical and enzymatic probing of RNA secondary structure and RNA/protein interactions provides the basis for understanding the functions of structured RNAs. However, the ability to rapidly perform such experiments using capillary electrophoresis has been hampered by relatively labor-intensive data analysis software. While these computationally robust programs have been shown to calculate residue-specific reactivities to a high degree of accuracy, they often require time-consuming manual intervention and lack the ability to be easily modified by users. To alleviate these issues, RiboCAT (Ribonucleic acid capillary-electrophoresis analysis tool) was developed as a user-friendly, Microsoft Excel-based tool that reduces the need for manual intervention, thereby significantly shortening the time required for data analysis. Features of this tool include (i) the use of an Excel platform, (ii) a method of intercapillary signal alignment using internal size standards, (iii) a peak-sharpening algorithm to more accurately identify peaks, and (iv) an open architecture allowing for simple user intervention. Furthermore, a complementary tool, RiboDOG (RiboCAT data output generator) was designed to facilitate the comparison of multiple data sets, highlighting potential inconsistencies and inaccuracies that may have occurred during analysis. Using these new tools, the secondary structure of the HIV-1 5' untranslated region (5'UTR) was determined using selective 2'-hydroxyl acylation analyzed by primer extension (SHAPE), matching the results of previous work., (© 2017 Cantara et al.; Published by Cold Spring Harbor Laboratory Press for the RNA Society.)

With the advances in sequencing technology and transcriptome analysis, it is estimated that up to 75 % of the human genome is transcribed into RNAs. This finding prompted intensive investigations on the biological functions of noncoding RNAs and led to very exciting discoveries of microRNAs as important players in disease pathogenesis and therapeutic applications. Research on long noncoding RNAs (lncRNAs) is in its infancy, yet a broad spectrum of biological regulations has been attributed to lncRNAs. As a novel class of RNA transcripts, the expression level and splicing variants of lncRNAs are various. Northern blot analysis can help us learn about the identity, size, and abundance of lncRNAs. Here we describe how to use northern blot to determine lncRNA abundance and identify different splicing variants of a given lncRNA.

Background: Genetic polymorphisms of human cytochrome P450 2A6 (CYP2A6) are one of the determinants of smoking behavior and/or tobacco-related lung cancer risk in male Japanese smokers. To help identify those at high risk, we developed a multiplex real-time polymerase chain reaction (PCR)-based genotyping method with dual-labeled probes to detect wild-type and whole-gene deletion of CYP2A6 directly from blood samples without DNA isolation., Methods: We validated the new real-time PCR method that uses dual-labeled probes by utilizing 116 genomic DNA samples that had been genotyped previously and 33 blood samples., Results: The new method could discriminate CYP2A6 from highly homologous CYP2A7 and CYP2A13 genes and could also determine CYP2A6*1 (wild type) and CYP2A6*4 (whole-gene deletion) alleles in perfect accordance with previous analysis data. Amplification curve profiles were obtained by multiplex real-time PCR assay with CYP2A6*1 and CYP2A6*4 primer sets and dual-labeled probes using one-drop blood samples previously genotyped for CYP2A6*1/*1, CYP2A6*1/*4, and CYP2A6*4/*4., Conclusions: A real-time multiplex PCR assay for genotyping wild-type CYP2A6 and whole-gene deletion was developed with dual-labeled probes. The new method achieved 100% agreement with data from the conventional PCR method for 116 genomic DNA samples and samples from 33 volunteers, thereby establishing its validity., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Chemical probing of RNA and DNA structure is a widely used and highly informative approach for examining nucleic acid structure and for evaluating interactions with protein and small-molecule ligands. Use of capillary electrophoresis to analyze chemical probing experiments yields hundreds of nucleotides of information per experiment and can be performed on automated instruments. Extraction of the information from capillary electrophoresis electropherograms is a computationally intensive multistep analytical process, and no current software provides rapid, automated, and accurate data analysis. To overcome this bottleneck, we developed a platform-independent, user-friendly software package, QuShape, that yields quantitatively accurate nucleotide reactivity information with minimal user supervision. QuShape incorporates newly developed algorithms for signal decay correction, alignment of time-varying signals within and across capillaries and relative to the RNA nucleotide sequence, and signal scaling across channels or experiments. An analysis-by-reference option enables multiple, related experiments to be fully analyzed in minutes. We illustrate the usefulness and robustness of QuShape by analysis of RNA SHAPE (selective 2'-hydroxyl acylation analyzed by primer extension) experiments.

Peptide nucleic acid (PNA) probes hybridize to denatured telomeric sequences in cells permeabilized in hot formamide. In reported protocols, the hybridization was conducted in solutions with high formamide concentrations to avoid the DNA renaturation that can hamper binding of the oligo-PNA probe to specific sequences. We postulated that telomeric DNA, confined in the nuclear microvolume, is not able to properly renature after hot formamide denaturation. Therefore, to improve hybridization conditions between the probe and the target sequences, it might be possible to add probe to sample after the complete removal of formamide., (Copyright © 2011 Elsevier Inc. All rights reserved.)

This chapter provides an introduction to the use of fluorescent probes in flow cytometry. Sample preparation for the use of surface labeling with antibodies as well as for the use of nucleic acid probes is discussed. The utility of cell sorting is also discussed.

A new approach for the detection of DNA target molecules is described, using capture probes and subsequent signal enhancement by a uniform polymerase chain reaction (PCR). Peptide nucleic acid probes were immobilized in real-time PCR-compatible microtiter plates. After hybridization of biotinylated DNA targets, detection was performed by real-time immuno-PCR, a method formerly used for protein detection. We demonstrate the feasibility of this strategy for the qualitative detection of DNA oligonucleotides with a detection limit (LOD) of 6 attomol. Furthermore, the method was applied to PCR-amplified samples from genetically modified maize DNA (Mon810). A 483-bp DNA fragment was detected in mixture with 99.9% of noncomplementary DNA with a sensitivity down to the level of attomole.

The mammalian nucleus has a complex structural organization that dynamically interacts with the genome. Chromatin is organized into discrete domains by association with distinct nuclear compartments enriched in structural and regulatory proteins. Growing evidence suggests that gene activity is modulated by interactions with these sub-nuclear compartments. Therefore, analyzing how nuclear architecture controls genome activity will be necessary to fully understand complex biological processes such as development and disease. In this article we describe a molecular methodology involving inducible tethering that can be used to position genes at the inner nuclear membrane (INM)-lamina compartment. The consequences of such directed re-positioning on gene activity or other DNA transactions can then be analyzed. This approach can be generalized and extended to position genes or chromosomal domains within other nuclear compartments thereby greatly facilitating the analysis of nuclear structure and its impact on genome activity.

We developed the approach to detect single-nucleotide mutation with peptide nucleic acid (PNA) probes and time-resolved fluorometry using a fluorescence lanthanide chelate label, {2,2',2'',2'''-{4'-{[(4,6-dichloro-1,3,5-triazin-2-yl)amino]biphenyl-4-yl}-2,2': 6',2''-terpyridine-6,6''-diyl}bis(methylenenitrilo)}tetrakis(acetato)}europium(III) (DTBTA-Eu3+). Compared with DNA probes, PNA probes showed lower mismatch signals and gave higher signal/noise (S/N) ratios. Using the system, we examined the single-nucleotide mutations of codon 12 in the c-Ha-ras gene of PCR amplicons of genome DNAs isolated from human umbilical vein endothelial cells (HUVECs) and T24 cells.

8-(Pyren-1-yl)-2'-deoxyguanosine (Py-G) was incorporated synthetically as an optical probe into oligonucleotides. The Py-G group in DNA does not discriminate between any of the four natural nucleosides as a counterbase and exhibits altered optical properties in single strands versus double strands. Thus, the duplex hybridization of Py-G-modified DNA can be observed by both fluorescence and absorption spectroscopy. Moreover, Py-G in DNA can be applied as photoinducable donor for charge transfer processes with small peptides.

The Moloney murine leukemia virus-transformed suspension cell line WMP2 is derived from wild mice (Mus musculus) of the WMP/WMP strain. These mice carry nine pairs of metacentric Robertsonian translocation chromosomes. As the chromosomes of the wild-type mouse are all acrocentric, metaphase spreads of the WMP2 cells seam to be highly suited for physical gene mapping. Here we studied the WMP2 line using spectral karyotyping (SKY) combined with new established mouse specific multicolor banding (mcb) probes for the chromosomes X, 3, 4, 6 and 18. SKY revealed that the WMP2 cell line developed further four derivative chromosomes. After application of mcb five previously unrecognizable intrachromosomal rearrangements with 9 breakpoints were detected for the studied chromosomes.

The ability to observe the dynamic of RNA in single living cells offers many exciting opportunities in biology and medicine. In the last few years, molecular beacons (MBs) have shown great potential in monitoring RNA synthesis, transportation, and localization with good sensitivity and selectivity. A hairpin structure probe, MB is a dual-labeled single stranded oligonucleotide that only fluoresces in the presence of target sequences. In this paper, the basic principle and design of MB will be described. The application of MB for RNA imaging in living cells will be reviewed. The limitations of MB for in vivo application will be identified. In the last section of the article, the efforts on designing better MBs for highly sensitive and selective RNA imaging will be discussed.

In situ hybridization is a method for detecting specific nucleic acid sequences within individual cells. This technique permits visualization of viral nucleic acid or gene expression in individual cells within their histologic context. In situ hybridization is based on the complementary binding of a labeled nucleic acid probe to complementary sequences in cells or tissue sections, followed by visualization of target sequences within the cells. It has been used widely for the detection of viral nucleic acid sequences within individual cells. This review will define the technical approaches of in situ hybridization and its current application to detect viral nucleic acids within formalin-fixed, paraffin-embedded tissue samples, with special reference to the Epstein-Barr virus.

New methods for automated, direct nucleic acid purification and detection are required for the next generation of unattended environmental monitoring devices. In this study we investigated whether tunable-surface bead chemistry and peptide nucleic acids (PNA) could enhance the recovery and detection of intact rRNA in both test tube and automated suspension array hybridization formats. Intact rRNA was easily captured and detected on PNA-coated Lumavidin beads from 0.1 ng total RNA with a 15-min hybridization in pH 7 buffer, representing 1.7 x 10(3) cell equivalents of total RNA. DNA-conjugated beads in pH 5 hybridization buffer required an overnight hybridization to achieve a detectable signal at 0.1 ng target RNA. Standard DNA hybridization conditions (pH 7) were one order of magnitude less sensitive than the tunable-surface (pH 5) condition. The PNA-conjugated particles were 100x more sensitive than the tunable-surface DNA particles in the automated format, with a detection limit of 0.1 ng total RNA. The detection limits for total RNA on PNA-conjugated microparticles is immediately conducive to the detection and characterization of microorganisms in low-biomass environments or to the identification of rare sequences in a complex sample mixture, without using PCR.

The ability to analyze multiple polymorphic sites rapidly and accurately is crucial in all areas of genetic analysis. We have developed an approach for the detection of multiple point mutations, using allele-specific, mass-labeled, peptide nucleic acid (PNA) hybridization probes, and direct analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The composite mass spectra produced contain peaks of distinct masses corresponding to each allele present, resulting in a mass spectral "fingerprint" for each DNA sample. The hybridization characteristics of PNA:DNA duplexes were found to be highly dependent on both base content and sequence. Results from the analysis of four polymorphic sites contained in exon 4 of the human tyrosinase gene show that this approach is simple, rapid, and accurate with potential applications in many areas of genetic analysis.

The detection of specific nucleic acid sequences plays a major role in modern biology and in medicine it is involved in analyzing basic genome structure and function, identifying mutated oncogenes, infectious or genetic diseases, typing tissues before transplantation, and comparing DNA sequences in forensic situations. This review explores recent developments relating to gene probe assays and their reporter systems.

In situ hybridisation (ISH) is based on the complementary pairing of labelled DNA or RNA probes with normal or abnormal nucleic acid sequences in intact chromosomes, cells or tissue sections. Compared with other molecular biology techniques applicable to anatomical pathology, ISH enjoys better rapport with histopathologists because of its similarity to immunohistochemistry. It has the unique advantage over other molecular biology techniques--largely based on probe hybridisation with nucleic acid extracted from homogenised tissue samples--of allowing localisation and visualisation of target nucleic acid sequences within morphologically identifiable cells or cellular structures. Probes for ISH may bear radioactive or non-radioactive labels. Isotopic probes (3H, 32P, 35S, 125I) are generally more sensitive than non-isotopic ones but are less stable, require longer processing times and stringent disposal methods. Numerous non-isotopic labels have been used; of these biotin and digoxigenin are the reporters of choice. Optimised non-isotopic systems of equivalent sensitivity to those which use radioactive-labelled probes have been described. In ISH, finding the optimal balance between good morphological preservation of cells and strong hybridisation signals is crucial. Tissue fixation and retention of cytoskeletal structures, unfortunately, impede diffusion of probes into tissues. ISH sensitivity is also influenced by inherent properties of the probe and hybridisation conditions. Although ISH is largely a research tool, it is already making strong inroads into diagnostic histopathology. It has been applied for the detection of various infective agents particularly CMV, HPV, HIV, JC virus, B19 parvovirus, HSV-1, EBV, HBV, hepatitis delta virus, Chlamydia trachomatis, salmonella and mycoplasma in tissue sections.(ABSTRACT TRUNCATED AT 250 WORDS)

A method using flow cytometry and fluorescent in situ hybridization (ISH) to detect RNA in cells is described. L1210 murine leukemia cells were fixed with 1% formaldehyde in HEPES buffered Hank's balanced salt solution (HH) followed by 70% ethanol. Endogenous RNAses were blocked by diethylpyrocarbonate treatment. Single-stranded sense and antisense RNA probes, labeled with biotin-11-UTP, were transcribed from a 2.1 kb 28S ribosomal RNA (rRNA) gene fragment subcloned into the pGEM2 plasmid. For good results, it was essential that the probes were degraded to 100-150 nucleotides before use. Hybridization was performed at 45 degrees C in 50% formamide, 5 x SSC, 0.5% SDS. Hybrids were detected with streptavidin-FITC by flow cytometry. Antisense rRNA probe signal was 100 times higher than the background. The hybrids were largely resistant to RNAse and melted at high temperature. The sense probe also gave a signal (5 times background), which was not RNAse resistant and was attributed to the presence of internal inverted repeats in the ribosomal RNA. When sufficient background reduction can be achieved, it is expected that as few as ten mRNA molecules per cell can be detected with the fluorescent in situ hybridization method.