Search

Glibenclamide (GBN) is a commonly used oral medication for treating type-II diabetes that acts by reducing high blood sugar levels. The effectiveness of GBN depends on the quality of the product. The quality is influenced by the solubility properties of a drug. This study aimed to measure the solubility of GBN in various solvent mixtures including some glycols and alcohols. The solubility was determined using a shake-flask method at 298.2 K under atmospheric pressure. The results showed that GBN had the highest solubility in ethylene glycol monomethyl ether and alcohol mixtures compared to the other tested glycols. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive overview of microstrip passive components for energy harvesting and 5G applications. The paper covers the structure, fabrication, and performance of various microstrip passive components such as filters, couplers, diplexers, and triplexers. The size and performance of several 5G and energy harvester microstrip passive devices are compared and discussed. The review highlights the importance of these components in enabling efficient energy harvesting and high-speed communication in 5G networks. In addition, the paper discusses the latest advancements in microstrip technology and identifies key research challenges and future directions in this field. Overall, this review serves as a valuable resource for researchers and engineers working on microstrip passive components for energy harvesting and 5G applications. [ABSTRACT FROM AUTHOR]

A novel compact microstrip diplexer based on spiral cells is presented in this paper. The proposed resonator primarily consists of two spiral thin lines connected to a pair of coupled lines. This novel resonator is analyzed mathematically to find its behavior and tune the dimensions of the final layout easily. Using the analyzed resonator, two bandpass filters (BPFs) are designed. Then, a novel high-performance microstrip diplexer is obtained by designing and integrating these BPFs. The proposed diplexer boasts a remarkably small size of 0.004 λg2 and features flat channels with low insertion losses of only 0.048 dB and 0.065 dB. The maximum group delays of S21 and S31 are 0.31 ns and 0.86 ns, respectively, which are good values for modern communication system. Meanwhile, inside its passbands for some frequency ranges its group delays are negative. Thus, using this diplexer can decrease the signal dispersion. The first and second passbands are wide with 47.3% and 47.1% fractional bandwidths, respectively. Therefore, this diplexer can be easily used in designing high-performance radio frequency communication systems. [ABSTRACT FROM AUTHOR]

This paper presents the design of a novel lowpass–bandpass diplexer with compact size and good performance using microstrip cells. For this purpose, two microstrip lowpass and bandpass filters are separately designed and mathematically analyzed. The proposed microstrip diplexer has a novel and simple structure. It occupies a compact area of 0.037 λ g2 (722 mm2), and its insertion loss and S 11 at both channels are low. The insertion loss at the lower and upper channels is only 0.047 and 0.16 dB, respectively. Meanwhile, both channels are flat with the maximum group delay of 1.68 ns which is the lowest compared to the previously reported diplexers mentioned in this paper. To design the proposed diplexer, first, a lowpass diplexer with good performance is designed which has low losses and a good figure of merit. It has a flat passband with a sharp roll-off. Then, to achieve the proposed diplexer, a bandpass resonator is added to the lowpass filter without any extra matching circuit, which saves the overall size. The proposed diplexer is designed, simulated, and fabricated, where the simulation and measurement results are close. [ABSTRACT FROM AUTHOR]

In this letter, novel spiral‐coupled transmission lines are used to obtain a high‐performance microstrip coupler. The advantages of the proposed microstrip coupler are novel structure, filtering frequency response, suppressed harmonics up to second harmonics, transmission poles, low losses, compact size, and good phase balance. The proposed structure is novel and different from the previous coupler designs such as rate‐races, rings, and branch‐lines types. It is presented for the first time in this work with a very small size and good performance. The size of this coupler is only 82.6 mm2 (0.004 λg2). The common port return loss is 33 dB and the insertion losses at port 2 and port 3 are 2.2 and 2.7 dB, respectively. To prove the accuracy of the design method and simulation results, the proposed coupler is fabricated and measured where the measurement results confirm the simulation results and the proposed design method. [ABSTRACT FROM AUTHOR]

In 2006, Condition (E ′ P) was introduced by Golchin and Mohammadzadeh and the theorems associated with it were proved. In this paper, we continue the study in relation to the above condition and for some of the properties in the S -acts. We present the equivalent on the basis of that, which in turn illustrates the importance of this condition. Given that Condition (E ′ P) is the generalization of Conditions (P ′) and (E ′) , so the study of the condition in relation to other properties of the S -acts will give a better understanding of the behavior of the S -acts and even Conditions (P ′) and (E ′). [ABSTRACT FROM AUTHOR]

Symmetry is essential in the design of complex systems like the Metaverse Transportation Sys-tem (MTS) and helps ensure that all components work together effectively. In the development of a microstrip diplexer for 5G-enabled IoT and MTS, maintaining symmetry is crucial to achieving flat responses with low group delays. By integrating transportation technology and the Metaverse, the Metaverse Transportation System (MTS) can greatly improve the effectiveness and intellect of transportation systems in reality. To establish a dependable network, it is essential to include 5G-enabled Internet of Things (IoT) and sensor networks with a sustainable design that focuses on efficiency and energy conservation. A three-channel microstrip lowpass-bandpass diplexer has been developed for 5G-enabled IoT and MTS implementation. Multi-channel designs are rare due to the complex design process, but this diplexer is very compact at only 0.004 λg2. All channels have flat responses with group delays of 0.34 ns, 1.7 ns, and 0.34 ns at the lower, middle, and upper passbands, respectively. The lowpass channel has a cut-off frequency of 1.22 GHz, suitable for mid-band 5G applications. Compared to previous work, this diplexer achieves the smallest size, lowest group delay, and insertion and return losses at the lower channel. It consists of a lowpass-bandpass section connected to a band-pass filter analyzed mathematically, and its performance has been verified through simulation and measurement with good accuracy. [ABSTRACT FROM AUTHOR]