Search

Hypothesis: Small scale Marangoni motors, which self-generate motion by inducing surface tension gradients on water interfaces through release of surface-active "fuels", have recently been proposed as self-powered mixing devices for low volume fluids. Such devices however, often show self-limiting lifespans due to the rapid saturation of surface-active agents. A potential solution to this is the use volatile surface-active agents which do not persist in their environment. Here we investigate menthyl acetate (MA) as a safe, inexpensive and non-persistent fuel for Marangoni motors., Experiments: MA was loaded asymmetrically into millimeter scale silicone sponges. Menthyl acetate reacts slowly with water to produce the volatile surface-active menthol, which induces surface tension gradients across the sponge to drive motion by the Marangoni effect. Videos were taken and trajectories determined by custom software. Mixing was assessed by the ability of Marangoni motors to homogenize milliliter scale aqueous solutions containing colloidal sediments., Findings: Marangoni motors, loaded with asymmetric "Janus" distributions of menthyl acetate show velocities and rotational speeds up to 30 mm s -1 and 500 RPM respectively, with their functional lifetimes scaling linearly with fuel volume. We show these devices are capable of enhanced mixing of solutions at orders of magnitude greater rates than diffusion alone., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Motility is a hallmark of life's dynamic processes, enabling cells to actively chase prey, repair wounds, and shape organs. Recreating these intricate behaviors using well-defined molecules remains a major challenge at the intersection of biology, physics, and molecular engineering. Although the polymerization force of the actin cytoskeleton is characterized as a primary driver of cell motility, recapitulating this process in protocellular systems has proven elusive. The difficulty lies in the daunting task of distilling key components from motile cells and integrating them into model membranes in a physiologically relevant manner. To address this, we developed a method to optically control actin polymerization with high spatiotemporal precision within cell-mimetic lipid vesicles known as giant unilamellar vesicles (GUVs). Within these active protocells, the reorganization of actin networks triggered outward membrane extensions as well as the unidirectional movement of GUVs at speeds of up to 0.43 μm/min, comparable to typical adherent mammalian cells. Notably, our findings reveal a synergistic interplay between branched and linear actin forms in promoting membrane protrusions, highlighting the cooperative nature of these cytoskeletal elements. This approach offers a powerful platform for unraveling the intricacies of cell migration, designing synthetic cells with active morphodynamics, and advancing bioengineering applications, such as self-propelled delivery systems and autonomous tissue-like materials.

The actin cytoskeleton governs the dynamic functions of cells, ranging from motility to phagocytosis and cell division. To elucidate the molecular mechanism, in vitro reconstructions of the actin cytoskeleton and its force generation process have played essential roles, highlighting the importance of efficient purification methods for actin-binding proteins. In this study, we introduce a unified purification method for actin-binding proteins, including capping protein (CP), cofilin, ADF, profilin, fascin, and VASP, key regulators in force generation of the actin cytoskeleton. Exploiting a His-Strep-tag combined with a TEV protease cleavage site, we purified these diverse actin-binding proteins through a simple two-column purification process: initial purification through a Strep-Tactin column and subsequent tag removal through the reverse purification by a Ni-NTA column. Biochemical and microscopic assays validated the functionality of the purified proteins, demonstrating the versatility of the approach. Our methods not only delineate critical steps for the efficient preparation of actin-binding proteins but also hold the potential to advance investigations of mutants, isoforms, various source species, and engineered proteins involved in actin cytoskeletal dynamics.•Unified purification method for various actin-binding proteins.•His-Strep-tag and TEV protease cleavage for efficient purification.•Functional validation through biochemical and microscopic assays., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors. Published by Elsevier B.V.)

We report primordial aqueous alteration signatures in water-soluble organic molecules from the carbonaceous asteroid (162173) Ryugu by the Hayabusa2 spacecraft of JAXA. Newly identified low-molecular-weight hydroxy acids (HO-R-COOH) and dicarboxylic acids (HOOC-R-COOH), such as glycolic acid, lactic acid, glyceric acid, oxalic acid, and succinic acid, are predominant in samples from the two touchdown locations at Ryugu. The quantitative and qualitative profiles for the hydrophilic molecules between the two sampling locations shows similar trends within the order of ppb (parts per billion) to ppm (parts per million). A wide variety of structural isomers, including α- and β-hydroxy acids, are observed among the hydrophilic molecules. We also identify pyruvic acid and dihydroxy and tricarboxylic acids, which are biochemically important intermediates relevant to molecular evolution, such as the primordial TCA (tricarboxylic acid) cycle. Here, we find evidence that the asteroid Ryugu samples underwent substantial aqueous alteration, as revealed by the presence of malonic acid during keto-enol tautomerism in the dicarboxylic acid profile. The comprehensive data suggest the presence of a series for water-soluble organic molecules in the regolith of Ryugu and evidence of signatures in coevolutionary aqueous alteration between water and organics in this carbonaceous asteroid., (© 2024. The Author(s).)

DNA droplets, artificial liquid-like condensates of well-engineered DNA sequences, allow the critical aspects of phase-separated biological condensates to be harnessed programmably, such as molecular sensing and phase-state regulation. In contrast, their RNA-based counterparts remain less explored despite more diverse molecular structures and functions ranging from DNA-like to protein-like features. Here, we design and demonstrate computational RNA droplets capable of two-input AND logic operations. We use a multibranched RNA nanostructure as a building block comprising multiple single-stranded RNAs. Its branches engaged in RNA-specific kissing-loop (KL) interaction enables the self-assembly into a network-like microstructure. Upon two inputs of target miRNAs, the nanostructure is programmed to break up into lower-valency structures that are interconnected in a chain-like manner. We optimize KL sequences adapted from viral sequences by numerically and experimentally studying the base-wise adjustability of the interaction strength. Only upon receiving cognate microRNAs, RNA droplets selectively show a drastic phase-state change from liquid to dispersed states due to dismantling of the network-like microstructure. This demonstration strongly suggests that the multistranded motif design offers a flexible means to bottom-up programming of condensate phase behavior. Unlike submicroscopic RNA-based logic operators, the macroscopic phase change provides a naked-eye-distinguishable readout of molecular sensing. Our computational RNA droplets can be applied to in situ programmable assembly of computational biomolecular devices and artificial cells from transcriptionally derived RNA within biological/artificial cells.

In recent years, there has been a growing interest in engineering dynamic and autonomous systems with robotic functionalities using biomolecules. Specifically, the ability of molecular motors to convert chemical energy to mechanical forces and the programmability of DNA are regarded as promising components for these systems. However, current systems rely on the manual addition of external stimuli, limiting the potential for autonomous molecular systems. Here, we show that DNA-based cascade reactions can act as a molecular controller that drives the autonomous assembly and disassembly of DNA-functionalized microtubules propelled by kinesins. The DNA controller is designed to produce two different DNA strands that program the interaction between the microtubules. The gliding microtubules integrated with the controller autonomously assemble to bundle-like structures and disassemble into discrete filaments without external stimuli, which is observable by fluorescence microscopy. We believe this approach to be a starting point toward more autonomous behavior of motor protein-based multicomponent systems with robotic functionalities.

Polycyclic aromatic hydrocarbons (PAHs) contain ≲20% of the carbon in the interstellar medium. They are potentially produced in circumstellar environments (at temperatures ≳1000 kelvin), by reactions within cold (~10 kelvin) interstellar clouds, or by processing of carbon-rich dust grains. We report isotopic properties of PAHs extracted from samples of the asteroid Ryugu and the meteorite Murchison. The doubly- 13 C substituted compositions (Δ2× 13 C values) of the PAHs naphthalene, fluoranthene, and pyrene are 9 to 51‰ higher than values expected for a stochastic distribution of isotopes. The Δ2× 13 C values are higher than expected if the PAHs formed in a circumstellar environment, but consistent with formation in the interstellar medium. By contrast, the PAHs phenanthrene and anthracene in Ryugu samples have Δ2× 13 C values consistent with formation by higher-temperature reactions.

As life evolved, the path from simple single cell organisms to multicellular enabled increasingly complex functionalities. The spatial separation of reactions at the micron scale achieved by cellular structures allowed diverse and scalable implementation in biomolecular systems. Mimicking such spatially separated domains in a scalable approach could open a route to creating synthetic cell-like structured systems. Here, we report a facile and scalable method to create multicellular-like, multi-compartment (MC) structures. Aqueous droplet-based compartments ranging from 50 to 400 μm were stabilized and connected together by hydrophobic layers composed of phospholipids and an emulsifier. Planar centimeter-scale MC structures were formed by droplet deposition on a water interface. Further, the resulting macroscopic shapes were shown to be achieved by spatially controlled deposition. To demonstrate configurability and potential versatility, MC assemblies of both homogeneous and mixed compartment types were shown. Notably, magnetically heterogeneous systems were achieved by the inclusion of magnetic nanoparticles in defined sections. Such structures demonstrated actuated motion with structurally imparted directionality. These novel and functionalized structures exemplify a route toward future applications including compartmentally assembled "multicellular" molecular robots.

Purification of functional DNA nanostructures is an essential step in achieving intended functions because misfolded structures and the remaining free DNA strands in a solution can interact and affect their behavior. However, due to hydrophobicity-mediated aggregation, it is difficult to purify DNA nanostructures modified with hydrophobic molecules by conventional methods. Herein, we report the purification of cholesterol-modified DNA nanostructures by using a novel surfactant-assisted gel extraction. The addition of sodium cholate (SC) to the sample solution before structure folding prevented aggregation; this was confirmed by gel electrophoresis. We also found that adding sodium dodecyl sulfate (SDS) to the sample inhibited structural folding. The cholesterol-modified DNA nanostructures prepared with SC were successfully purified by gel extraction, and their ability to bind to the lipid membrane surfaces was maintained. This method will facilitate the purification of DNA nanostructures modified with hydrophobic molecules and expand their applicability in the construction of artificial cell-like systems., (© 2022 The Authors. ChemBioChem published by Wiley-VCH GmbH.)

Biochemical systems in living cells have their optimum concentration ratio among each constituent element to maintain their functionality. However, in the case of the biochemical system with complex interactions and feedbacks among elements, their activity as a system greatly changes by the concentration shift of the entire system irrespective of the concentration ratio among elements. In this study, by using a transcription-translation (TX-TL) system as the subject, we illustrate the principle of the nonlinear relationship between the system concentration and the activity of the system. Our experiment and simulation showed that shifts of the system concentration of TX-TL by dilution and concentration works as a switch of activity and demonstrated its ability to induce a biochemical system to confer the permeability of small molecules to liposomes. These results contribute to the creation of artificial cells with the switch and provide an insight into the emergence of protocells., Competing Interests: The authors declare no competing interests., (© 2021 The Author(s).)

Intaking molecular information from the external environment is essential for the normal functioning of artificial cells/molecular robots. Herein, we report the design and function of a membrane nanopore using a DNA origami square tube with a cross-section of 100 nm 2 . When the nanopore is added to a giant vesicle that mimics a cell membrane, the permeation of large external hydrophilic fluorescent molecules is observed. Furthermore, the addition of up to four ssDNA strands enables size-based selective transport of molecules. A controllable artificial nanopore should facilitate the communication between the vesicle components and their environment.

Investigations into the refolding of DNA origami leads to the creation of reconstructable nanostructures and deepens our understanding of the sustainability of life. Here, we report the refolding of the DNA origami structure inside a micron-sized compartment. In our experiments, conventional DNA origami and truss-type DNA origami were annealed and purified to remove the excess staples in a test tube. The DNA origami was then encapsulated inside of a micron-sized compartment of water-in-oil droplets, composed of neutral surfactants. The re-annealing process was then performed to initiate refolding in the compartment. The resulting 100-nm-sized DNA nanostructures were observed using atomic force microscopy (AFM), and the qualities of their structures were evaluated based on their shape. We found that the refolding of the DNA origami structure was favored inside the droplets compared with refolding in bulk solution. The refolded structures were able to fold even under "quick" one-minute annealing conditions. In addition, the smaller droplets (average diameter: 1.2 µm) appeared to be more advantageous for the refolding of the origamis than larger droplets. These results are expected to contribute to understanding the principles of life phenomena based on multimolecular polymer self-assembly in a micron-sized compartment, and for the production and maintenance of artificially designed molecules., Competing Interests: The authors declare no conflict of interest.

An isothermal amplification circuit for specific DNA molecules was implemented in giant unilamellar vesicles. Using this circuit, over 5000-fold amplification of output DNAs was achieved, and the amplification behaviour depended on the concentration of input signal DNAs in a cell-sized compartment. Moreover, initiation of the amplification by photo-stimulation was demonstrated.

Giant vesicles were efficiently produced by squeezing a lipid (l-α-phosphatidylcholine from egg yolk)-coated marshmallow-like flexible macroporous silicone monolith in a buffer. The mean diameter of the obtained vesicles was 2 μm, showing a wide distribution, up to tens of micrometers, which was similar to that of vesicles formed by a natural swelling method. It was possible to prepare vesicle dispersions on a scale from several microliters to several hundred milliliters. A protein synthesis system (PURE system) contained in vesicles prepared using this method functioned effectively. Our absorbing-squeezing method is expected to help in studies that use giant vesicles such as artificial cells and drug delivery systems.

We propose a method to control the diffusion speed of DNA molecules with a target sequence in a polymer solution. The interaction between solute DNA and diffusion-suppressing DNA that has been anchored to a polymer matrix is modulated by the concentration of the third DNA molecule called the competitor by a mechanism called toehold exchange. Experimental results show that the sequence-specific modulation of the diffusion coefficient is successfully achieved. The diffusion coefficient can be modulated up to sixfold by changing the concentration of the competitor. The specificity of the modulation is also verified under the coexistence of a set of DNA with noninteracting base sequences. With this mechanism, we are able to control the diffusion coefficient of individual DNA species by the concentration of another DNA species. This methodology introduces a programmability to a DNA-based reaction-diffusion system.

The most common way to fabricate DNA nanostructures is to mix individually synthesized DNA oligomers in one pot. However, if DNA nanostructures could be produced through enzymatic reactions, they could be applied in various environments, including in vivo. Herein, an enzymatic method developed to construct a DNA nanostructure from a simple motif called a T-motif is reported. A long, repeated structure was replicated from a circular template by rolling circle amplification and then cleaved into T-motif segments by restriction enzymes. These motifs have been successfully assembled into a ladder-like nanostructure without purification or controlled annealing. This approach is widely applicable to constructing a variety of DNA nanostructures through enzymatic reactions., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In vitro transcription-translation systems (TX-TL) can synthesize most of individual genes encoded in genomes by using strong promoters and translation initiation sequences. This fact raises a possibility that TX-TL using genome as a template can reconstitute the profile of RNA and proteins in living cells. By using cell extracts and genome prepared from different organisms, here we developed a system for in vitro genome transcription-translation (iGeTT) using bacterial genome and cell extracts, and surveyed de novo synthesis of RNA and proteins. Two-dimensional electrophoresis and nano LC-MS/MS showed that proteins were actually expressed by iGeTT. Quantitation of transcription levels of 50 genes for intracellular homeostasis revealed that the levels of RNA synthesis by iGeTT are highly correlated with those in growth phase cells. Furthermore, activity of iGeTT was influenced by transcription derived from genome structure and gene location in genome. These results suggest that intracellular profiles and characters of genome can be emulated by TX-TL using genome as a template., (© The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.)

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Cell-sized liposomes and droplets coated with lipid layers have been used as platforms for understanding live cells, constructing artificial cells, and implementing functional biomedical tools such as biosensing platforms and drug delivery systems. However, these systems are very fragile, which results from the absence of cytoskeletons in these systems. Here, we construct an artificial cytoskeleton using DNA nanostructures. The designed DNA oligomers form a Y-shaped nanostructure and connect to each other with their complementary sticky ends to form networks. To undercoat lipid membranes with this DNA network, we used cationic lipids that attract negatively charged DNA. By encapsulating the DNA into the droplets, we successfully created a DNA shell underneath the membrane. The DNA shells increased interfacial tension, elastic modulus, and shear modulus of the droplet surface, consequently stabilizing the lipid droplets. Such drastic changes in stability were detected only when the DNA shell was in the gel phase. Furthermore, we demonstrate that liposomes with the DNA gel shell are substantially tolerant against outer osmotic shock. These results clearly show the DNA gel shell is a stabilizer of the lipid membrane akin to the cytoskeleton in live cells., Competing Interests: The authors declare no conflict of interest.

We constructed a rotary DNA origami device and tested its stepping operation on a mica substrate by sequential strand displacement with four different sets of signal DNA strands. This work paves the way for building a variety of dynamic rotary DNA nanodevices which respond to multiple signals.

We show electric control of unzipping and shearing dehybridization of a DNA duplex anchored to a hydrogel. Tensile force is applied by electrophoresing (25 V cm -1 ) gold nanoparticles pulling the DNA duplex. The pulled DNA strand is gradually released from the hydrogel. The unzipping release rate is faster than shearing; for example, 3-fold for a 15 base pair duplex, which helps to design electrically driven DNA devices.

Rapid progress in nanoscale bioengineering has allowed for the design of biomolecular devices that act as sensors, actuators, and even logic circuits. Realization of micrometer-sized robots assembled from these components is one of the ultimate goals of bioinspired robotics. We constructed an amoeba-like molecular robot that can express continuous shape change in response to specific signal molecules. The robot is composed of a body, an actuator, and an actuator-controlling device (clutch). The body is a vesicle made from a lipid bilayer, and the actuator consists of proteins, kinesin, and microtubules. We made the clutch using designed DNA molecules. It transmits the force generated by the motor to the membrane, in response to a signal molecule composed of another sequence-designed DNA with chemical modifications. When the clutch was engaged, the robot exhibited continuous shape change. After the robot was illuminated with light to trigger the release of the signal molecule, the clutch was disengaged, and consequently, the shape-changing behavior was successfully terminated. In addition, the reverse process-that is, initiation of shape change by input of a signal-was also demonstrated. These results show that the components of the robot were consistently integrated into a functional system. We expect that this study can provide a platform to build increasingly complex and functional molecular systems with controllable motility., (Copyright © 2017, American Association for the Advancement of Science.)

Stimuli-responsive DNA gels that can undergo a sol-gel transition in response to photo-irradiation provide a way to engineer functional gel material with fully designed DNA base sequences. We propose an X-shaped DNA motif that turns into a gel by hybridization of self-complementary sticky ends. By embedding a photo-crosslinking artificial base in the sticky-end sequence, repetitive gel-sol transitions are achieved through UV irradiation at different wavelengths. The concentration of the DNA motif necessary for gelation is as low as 40 μm after modification of the geometrical properties of the motif. The physical properties, such as swelling degree and diffusion coefficient, were assessed experimentally., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new class of artificial molecular transport system is constructed by polymeric microspheres. The microspheres are prepared by self-assembly of poly(ethylene glycol)-block-poly(3-dimethyl(methacryloyloxyethyl)ammonium propane sulfonate), PEG-b-PDMAPS, by intermolecular dipole-dipole interaction of sulfobetaine side chains in water. Below the upper critical solution temperature (UCST) of PEG-b-PDMAPS, the microspheres (∼1μm) interact with other microspheres by partial and transit fusion. In order to apply the interaction between microspheres, a 3'-TAMRA-labeled single-stranded DNA oligomer (ssDNA) is encapsulated into a PEG-b-PDMAPS microsphere by thermal treatment. The exchange of ssDNA between microspheres is confirmed by fluorescence resonance energy transfer (FRET) quenching derived from double-stranded formation with complementary 5'-BHQ-2-labeled ssDNA encapsulated in PEG-b-PDMAPS microspheres. The exchange rate of ssDNA is controllable by tuning the composition of the polymer. The contact-dependent transport of molecules can be applied in the areas of microreactors, sensor devices, etc., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Self-assembling molecular building blocks able to dynamically change their shapes, is a concept that would offer a route to reconfigurable systems. Although simulation studies predict novel properties useful for applications in diverse fields, such kinds of building blocks, have not been implemented thus far with molecules. Here, we report shape-variable building blocks fabricated by DNA self-assembly. Blocks are movable enough to undergo shape transitions along geometrical ranges. Blocks connect to each other and assemble into polymorphic ring-shaped clusters via the stacking of DNA blunt-ends. Reconfiguration of the polymorphic clusters is achieved by the surface diffusion on mica substrate in response to a monovalent salt concentration. This work could inspire novel reconfigurable self-assembling systems for applications in molecular robotics.

Here, we report a method for introducing large objects of up to a micrometer in diameter into cultured mammalian cells by electrofusion of giant unilamellar vesicles. We prepared GUVs containing various artificial objects using a water-in-oil (w/o) emulsion centrifugation method. GUVs and dispersed HeLa cells were exposed to an alternating current (AC) field to induce a linear cell-GUV alignment, and then a direct current (DC) pulse was applied to facilitate transient electrofusion. With uniformly sized fluorescent beads as size indexes, we successfully and efficiently introduced beads of 1 µm in diameter into living cells along with a plasmid mammalian expression vector. Our electrofusion did not affect cell viability. After the electrofusion, cells proliferated normally until confluence was reached, and the introduced fluorescent beads were inherited during cell division. Analysis by both confocal microscopy and flow cytometry supported these findings. As an alternative approach, we also introduced a designed nanostructure (DNA origami) into live cells. The results we report here represent a milestone for designing artificial symbiosis of functionally active objects (such as micro-machines) in living cells. Moreover, our technique can be used for drug delivery, tissue engineering, and cell manipulation.

Toward reconstitution of living cells by artificial cells technology, it is critical process to understand the differences between mixtures of biomolecules and living cells. For the aim, we have developed procedures for preparation of an additive-free cell extract (AFCE) and for concentrating biomacromolecules in artificial cells. In this review, we introduce our recent progress to reconstitute intracellular environments in vitro and in artificial cells.

Telechelic α,ω-di(twin-tailed poly(N-isopropylacrylamides)) form polymersomes in water that increase in size by fusion when the water temperature exceeds the polymers cloud point temperature. Hybrid vesicles form in mixed suspensions of giant phospholipid liposomes and polymersomes by adsorption/fusion, and undergo further transformations, such as fission.

Replication of all living cells relies on the multirounds flow of the central dogma. Especially, expression of DNA replication proteins is a key step to circulate the processes of the central dogma. Here we achieved the entire sequential transcription-translation-replication process by autonomous expression of chromosomal DNA replication machineries from a reconstituted transcription-translation system (PURE system). We found that low temperature is essential to express a complex protein, DNA polymerase III, in a single tube using the PURE system. Addition of the 13 genes, encoding initiator, DNA helicase, helicase loader, RNA primase and DNA polymerase III to the PURE system gave rise to a DNA replication system by a coupling manner. An artificial genetic circuit demonstrated that the DNA produced as a result of the replication is able to provide genetic information for proteins, indicating the in vitro central dogma can sequentially undergo two rounds.

The cellular environment differs from that of reconstituted materials mainly because of the presence of highly condensed biomacromolecules. To mimic the environment and conditions in living cells, we developed a method to prepare additive-free, highly concentrated cell extracts. First, we verified the requirement for specific salts and buffers for functional cell-free translation extracts. The S30 fraction of Escherichia coli cell extracts without additives exhibited sufficient cell-free protein production. Next, we established a method to accumulate biological components by gradual evaporation by using a vacuum desiccator. Bovine serum albumin, green fluorescent protein, alkaline phosphatase, and a diluted reconstituted protein expression system were successfully condensed in their active forms using this method. The protein concentration of the prepared cell extract was elevated to 180 mg/mL, which was expected to contain approximately 260 mg/mL macromolecules, without the loss of cell-free protein expression activity. Such a condensed cell extract may be useful for investigating the differences between cells and reconstituted materials and may contribute to the development of methods to synthesize cells from cell extracts in the future.

The integral membrane protein bacteriorhodopsin, containing a fluorescent amino acid at a specific position, was synthesized in the presence of hydrated lipid films using an in vitro translation system expanded with a four-base codon/anticodon pair. Cell-sized liposomes with the labeled protein inserted into the liposome membranes were generated after the translation reaction. This study also demonstrated that this labeling method could be used to analyze the dynamic properties of membrane proteins in situ by fluorescence correlation spectroscopy., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Proteoliposomes were directly prepared by synthesizing membrane proteins with the use of minimal protein synthesis factors isolated from Escherichia coli (the PURE system) in the presence of liposomes. Connexin-43 (Cx43), which is a water-insoluble integral membrane protein that forms a hexameric complex in membranes, was cotranslationally integrated with an essentially uniform orientation in liposomes. The addition of liposomes following protein expression (post-translational presence of liposomes) did not lead to the integration of Cx43 into the liposome membranes. The amount of integrated Cx43 increased as the liposome concentration increased. The presence of liposomes did not influence the total amount of synthesized Cx43. The Cx43 integrated into the liposome membranes formed open membrane pores. These results indicate that the liposomes act in a chaperone-like manner by preventing Cx43 from aggregating in solution, because of integration into the bilayer, and also by functionalization of the integrated Cx43 in the membrane. This is the first report that cell-free-synthesized water-insoluble membrane protein is directly integrated with a uniform orientation as a functional oligomer into liposome membranes. This simple proteoliposome preparation procedure should be a valuable approach for structural and functional studies of membrane proteins.

We have developed a combined micro-channel and micro-well system for easy cell loading, culture and post-culture operation on a chip. To demonstrate the reliability of the system, on chip cell culture and differentiation were performed with different types of substrates made of culture dish, glass cover slide and polydimethylsiloaxe (PDMS). As expected, mouse embryo fibroblasts (MEF) showed different adhesion and growth rate on different substrates. When embryonic stem (ES) cells were co-cultured with MEFs, the formation of ES colonies is efficient on both glass and Petri dish, although PDMS could also be used. Finally, ES cell differentiation with neuron growth factors was performed on different substrates, showing clear advantages of using culture Petri dish over both glass and PDMS.

We developed an alternative patterning technique which is capable of producing both topographic and biochemical features for cell culture studies. This technique is based on microaspiration induced with a degassed poly (dimethylsiloxane) (PDMS) mold. After degassing in a rough vacuum chamber and placed on a sample surface, liquid solution can be aspired through channels and cavities created in the PDMS mold. Depending on the composition of the solution and the associated drying or incubation processes, a variety of surface patterns can be produced without applying external pressure. For demonstration, we fabricated agarose gel microwells and biomolecule patterns either on a glass plate or in a cell culture Petri dish, both applicable for cell culture studies., ((c) 2009 Wiley Periodicals, Inc.)

An in vitro translation system, based on cell components of the hyperthermophilic archaeon, Thermococcus kodakaraensis, has previously been developed. The system has been optimized and applied for protein production at high temperatures (60-65 degrees C). In this paper, we have examined the possibilities to utilize this system at a lower temperature range using green fluorescence protein (GFP) as the reporter protein. By optimizing the composition of the reaction mixture, and adding chaperonins from the mesophilic Escherichia coli, the yield of protein production at 40 degrees C was increased by fivefold. For liposome encapsulation of the optimized system, water-in-oil cell-sized emulsions were prepared by adding the translation system/GFP mRNA mixture to mineral oil supplemented with 1,2-dioleoyl-sn -glycero-3-phosphatidylcholine (DOPC). Giant liposomes were formed when these emulsions passed across a water/oil interface occupied with DOPC. The liposomes were incubated at 40 degrees C for 90 min, and fluorescence was examined by laser confocal microscopy. A significant increase in average fluorescence intensity was observed in liposomes with GFP mRNA, but not in those without mRNA. Our results indicate that the T. kodakaraensis in vitro translation system is applicable for protein production within giant liposomes, and these artificial cell models should provide the methodology to reconstitute various cell functions from a constitutional biology approach.

Liposomes are widely utilized in molecular biology and medicine as drug carriers. Here we report a new liposome-cell interaction through connexins. Connexin 43 (Cx43)-containing liposomes were prepared by using cell-free transcription/translation systems with plasmids encoding Cx43 in the presence of liposome. The expressed membrane protein, Cx43, was directly constituted to the liposome membrane upon in vitro synthesis, leading to pure membrane protein-containing liposomes. The hydrophilic dye calcein was efficiently transferred from Cx43-expressing liposomes to cultured cells (Cx43 expressing). The transfer is significantly blocked in the presence of gap junction inhibitor (18beta-glycyrrhetinic acid) and in the case of the other type of connexin (Cx32)-expressing cell. The results show that calcein entered the cell through connexin-mediated pathway. Cx43 liposomes containing a soluble NEMO-binding domain peptide suppressed the intracellular signaling cascade IL-1beta-induced NF-kappaB activation and cyclooxygenase-2 expression in Cx43-expressing cells, confirming effective peptide transfer into the cell. This is a new method for direct cytosolic delivery of hydrophilic molecules.

We investigated the direct constitution of membrane proteins into giant liposomes in cell-free (in vitro) protein synthesis. Giant liposomes were present in a translation reaction cocktail of a wheat germ cell-free protein translation system. Apo cytochrome b(5) (b5) and its fusion proteins were synthesized and directly localized in the liposomes. After the translation reaction, the proteo-liposomes were isolated by simplified discontinuous density-gradient centrifugation. Apo cytochrome b(5) conjugated dihydrofolate reductase (DHFR) was synthesized in the same procedure and the protein was directly displayed on the liposome surface. b5 acts as a "hydrophobic tag" for recruitment to the liposome surface.

Chemical control of the spontaneous motion of a reactive oil droplet moving on a glass substrate under an aqueous phase is reported. Experimental results show that the self-motion of an oil droplet is confined on an acid-treated glass surface. The transient behavior of oil-droplet motion is also observed with a high-speed video camera. A mathematical model that incorporates the effect of the glass surface charge is built based on the experimental observation of oil-droplet motion. A numerical simulation of this mathematical model reproduced the essential features concerning confinement of oil droplet motion within a certain chemical territory and also its transient behavior. Our results may shed light on physical aspects of reactive spreading and a chemotaxis in living things.

We report here a novel carrier of quantum dots (QDs) for intracellular labeling. Monodisperse hybrid nanoparticles (38 nm in diameter) of QDs were prepared by simple mixing with nanogels of cholesterol-bearing pullulan (CHP) modified with amino groups (CHPNH2). The CHPNH2-QD nanoparticles were effectively internalized into the various human cells examined. The efficiency of cellular uptake was much higher than that of a conventional carrier, cationic liposome. These hybrid nanoparticles could be a promising fluorescent probe for bioimaging.

Spontaneous changes in the morphology of cell-size liposomes (dioleoylphosphatidylcholine, DOPC and egg PC) as model cells were investigated in the presence of cholesterol. Tube structures and liposome networks connected by the tubes were observed in the presence of 5-30% cholesterol by dark-field and laser-scanning microscopy. Furthermore, in the presence of more than 40 mol% of cholesterol, the tubes disappeared and changed to small liposomes. Thus, cholesterol induced a morphological change in giant liposomes from tubes to small liposomes. These phenomena may be related to the role of cholesterol in the morphological changes in living cells such as neurons.

Functional protein synthesis was observed in cell-sized lipid vesicles following encapsulation of a gene-expression system. Expression of rsGFP (red-shifted green fluorescent protein) within individual vesicles was observed by fluorescence microscopy. Interestingly, at the early stage of the reaction, the expression efficiency inside the vesicle was remarkably higher than that in the solution outside. The synthesized rsGFP in individual vesicles is safe from attack by proteinase K added to the external aqueous solution. Studies on cell-sized vesicles expressing protein should contribute to a fundamental understanding of certain aspects of living systems and will be useful for practical applications, such as the construction of microreactors.

Rhythmic bursting on the order of seconds in a cluster of plastic beads under continuous irradiation of a focused neodymium-doped yttrium aluminum garnet (Nd:YAG) laser beam (1064 nm) is reported. The oscillatory instability is induced as a result of competition between trapping and scattering forces, where both forces are induced by the focused laser beam. Above a critical power of the laser beam, mode bifurcation from the stationary state into periodic bursting is observed. Our model employing ordinary differential equations reproduces the essential aspects of the experimental results.

A micrometer-sized lipid tubule exhibits oscillatory swinging motion under stationary irradiation by a Nd(3+):YAG laser ( lambda = 1064 nm). By choosing an appropriate optical path through an objective lens, the laser can be split into dual beams focused on the same position. Using this splitting, a lipid tubule can be shown to exhibit bistability with regard to the orientation of trapping. Driven by a temperature gradient induced by local photon heating, the trapped lipid tubule shows oscillatory motion between two possible orientations. This oscillatory phenomenon of the lipid tubule is thought to represent the breaking of time-translational symmetry under thermodynamically open conditions.