Search

Abstract Acquiring multi-dimensional optical information, such as intensity, spectrum, polarization, and phase, can significantly enhance the performance of photodetectors. Incorporating these dimensions allows for improved image contrast, enhanced recognition capabilities, reduced interference, and better adaptation to complex environments. However, the challenge lies in obtaining these dimensions on a single photodetector. Here we propose a misaligned unipolar barrier photodetector based on van der Waals heterojunction to address this issue. This structure enables spectral detection by switching between two absorbing layers with different cut-off wavelengths for dual-band detection. For polarization detection, anisotropic semiconductors like black phosphorus and black arsenic phosphorus inherently possess polarization-detection capabilities without additional complex elements. By manipulating the crystal direction of these materials during heterojunction fabrication, the device becomes sensitive to incident light at different polarization angles. This research showcases the potential of the misaligned unipolar barrier photodetector in capturing multi-dimensional optical information, paving the way for next-generation photodetectors.

Abstract The automated replacement of empty tubes in the yarn bank is a critical step in the process of automatic winding machines with yarn banks, as the real-time detection of depleted yarn on spools and accurate positioning of empty tubes directly impact the production efficiency of winding machines. Addressing the shortcomings of traditional methods, such as poor adaptability and low sensitivity in optical and visual tube detection, and aiming to reduce the computational and detection time costs introduced by neural networks, this paper proposes a lightweight yarn spool detection model based on YOLOv8. The model utilizes Darknet-53 as the backbone network, and due to the dense spatial distribution of yarn spool targets, it incorporates large selective kernel units to enhance the recognition and positioning of dense targets. To address the issue of excessive focus on local features by convolutional neural networks, a bi-level routing attention mechanism is introduced to capture long-distance dependencies dynamically. Furthermore, to balance accuracy and detection speed, a FasterNeck is constructed as the neck network, replacing the original convolutional blocks with Ghost convolutions and integrating with FasterNet. This design minimizes the sacrifice of detection accuracy while achieving a significant improvement in inference speed. Lastly, the model employs weighted IoU with a dynamic focusing mechanism as the bounding box loss function. Experimental results on a custom yarn spool dataset demonstrate a notable improvement over the baseline model, with a high-confidence mAP of 94.2% and a compact weight size of only 4.9 MB. The detection speed reaches 223FPS, meeting the requirements for industrial deployment and real-time detection.

Abstract The rapid development of the logistics industry has driven innovations in parcel sorting technology, among which the swift and precise positioning and classification of parcels have become key to enhancing the performance of logistics systems. This study aims to address the limitations of traditional light curtain positioning methods in logistics sorting workshops amidst high-speed upgrades. This paper proposes a high-speed classification and location algorithm for logistics parcels utilizing a monocular camera. The algorithm combines traditional visual processing methods with an enhanced version of the lightweight YOLOv5 object detection algorithm, achieving high-speed, high-precision parcel positioning. Through the adjustment of the network structure and the incorporation of new feature extraction modules and ECIOU loss functions, the model’s robustness and detection accuracy have been significantly improved. Experimental results demonstrate that this model exhibits outstanding performance on a customized logistics parcel dataset, notably enhancing the model's parameter efficiency and computational speed, thereby offering an effective solution for industrial applications in high-speed logistics supply.

Objective: Hashimoto’s thyroiditis is an inflammatory disease, and research suggests that a low-carbohydrate diet may have potential anti-inflammatory effects. This study aims to utilize Dixon-T2-weighted imaging (WI) sequence for a semi-quantitative assessment of the impact of a low-carbohydrate diet on the degree of thyroid inflammation in patients with Hashimoto’s thyroiditis. Methods: Forty patients with Hashimoto’s thyroiditis were recruited for this study and randomly divided into two groups: one with a normal diet and the other with a low-carbohydrate diet. Antibodies against thyroid peroxidase (TPOAb) and thyroglobulin (TgAb) were measured for all participants. Additionally, thyroid water content was semi-quantitatively measured using Dixon-T2WI. The same tests and measurements were repeated for all participants after 6 months. Results: After 6 months of a low-carbohydrate diet, patients with Hashimoto’s thyroiditis showed a significant reduction in thyroid water content (94.84 ± 1.57% vs 93.07 ± 2.05%, P < 0.05). Concurrently, a decrease was observed in levels of TPOAb and TgAb (TPOAb: 211.30 (92.63–614.62) vs 89.45 (15.9–215.67); TgAb: 17.05 (1.47–81.64) vs 4.1 (0.51–19.42), P < 0.05). In contrast, there were no significant differences in thyroid water content or TPOAb and TgAb levels for patients with Hashimoto’s thyroiditis following a normal diet after 6 months (P < 0.05). Conclusion: Dixon-T2WI can quantitatively assess the degree of thyroid inflammation in patients with Hashimoto’s thyroiditis. Following a low-carbohydrate diet intervention, there is a significant reduction in thyroid water content and a decrease in levels of TPOAb and TgAb. These results suggest that a low-carbohydrate diet may help alleviate inflammation in patients with Hashimoto’s thyroiditis.

Abstract Tunable optical information storage is crucial in artificial retinal systems for mimicking neurobiological visual characteristics. The perception and storage of light signals rely heavily on the regulation of the conductivity states of memristor materials (e.g., transition metal oxides). Controlling light memristor behavior via defects and polymorphic phases remains underexplored and differs from traditional plasticity training via repeated testing. In this study, defect‐driven ultraviolet light perception and memristor storage with phase transitions in vanadium dioxide (VO2) thin films are presented. The effects of oxygen defects and the corresponding polymorphic phases on ultraviolet light memristors are investigated. The dependence of phonon vibrations and insulator–metal transition behavior on defect levels are revealed. Self‐doping and polymorphs enable VO2 to exhibit distinct ultraviolet memristor performance. It is anticipated that defect‐driven light memristors significantly contribute to the realization of artificial synaptic devices and the implementation of advanced electronic neuron systems.

Here we report on a case of a 40-year-old female patient who presented with hypomanic episode after hyperthyroidism and major depressive episode after hypothyroidism, which was initially misdiagnosed as bipolar disorder due to another medical condition, and was found to be a co-morbid bipolar disorder of hyperthyroidism after treatment and follow-up. The course of diagnosis and treatment in this case suggests a close temporal relationship does not necessarily mean that there is a causal relationship on a physiologic level. User’s Guide for the SCID-5-CV Structured Clinical Interview for DSM-5 Disorders elaborate that the diagnosis of “……due to another medical condition” is relatively rare, and co-morbidity between psychiatric disorders and somatic diseases is much more common. Therefore, the relationship between somatic diseases and psychiatric disorders requires careful study of symptom correlation and more time for observational follow-up. When in doubt, the examiner’s default assumption should be that the somatic disease is not the cause (i.e., the psychiatric disorder is primary).

Abstract. Background:. Erosive esophagitis (EE) is a gastroesophageal reflux disease characterized by mucosal breaks in the esophagus. Proton pump inhibitors are widely used as maintenance therapy for EE, but many patients still relapse. In this trial, we evaluated the noninferiority of vonoprazan vs. lansoprazole as maintenance therapy in patients with healed EE. Methods:. We performed a double-blind, double-dummy, multicenter, phase 3 clinical trial among non-Japanese Asian adults with endoscopically confirmed healed EE from April 2015 to February 2019. Patients from China, South Korea, and Malaysia were randomized to vonoprazan 10 mg or 20 mg once daily or lansoprazole 15 mg once daily for 24 weeks. The primary endpoint was endoscopically confirmed EE recurrence rate over 24 weeks with a noninferiority margin of 10% using a two-sided 95% confidence interval (CI). Treatment-emergent adverse events (TEAEs) were recorded. Results:. Among 703 patients, EE recurrence was observed in 24/181 (13.3%) and 21/171 (12.3%) patients receiving vonoprazan 10 mg or 20 mg, respectively, and 47/184 (25.5%) patients receiving lansoprazole (differences: –12.3% [95% CI, –20.3% to –4.3%] and –13.3% [95% CI, –21.3% to –5.3%], respectively), meeting the primary endpoint of noninferiority to lansoprazole in preventing EE recurrence at 24 weeks. Evidence of superiority (upper bound of 95% CI

ABSTRACTDIRAS family GTPase 1 (DIRAS1) has been reported as a potential tumor suppressor in other human cancer. However, its expression pattern and role in cervical cancer remain unknown. Knockdown of DIRAS1 significantly promoted the proliferation, growth, migration, and invasion of C33A and SiHa cells cultured in vitro. Overexpression of DIRAS1 significantly inhibited the viability and motility of C33A and SiHa cells. Compared with normal cervical tissues, DIRAS1 mRNA levels were significantly lower in cervical cancer tissues. DIRAS1 protein expression was also significantly reduced in cervical cancer tissues compared with para-cancerous tissues. In addition, DIRAS1 expression level in tumor tissues was significantly negatively correlated with the pathological grades of cervical cancer patients. DNA methylation inhibitor (5-Azacytidine) and histone deacetylation inhibitor (SAHA) resulted in a significant increase in DIRAS1 mRNA levels in C33A and SiHa cells, but did not affect DIRAS1 protein levels. FTO inhibitor (FB23–2) significantly down-regulated intracellular DIRAS1 mRNA levels, but significantly up-regulated DIRAS1 protein levels. Moreover, the down-regulation of METTL3 and METTL14 expression significantly inhibited DIRAS1 protein expression, whereas the down-regulation of FTO and ALKBH5 expression significantly increased DIRAS1 protein expression. In conclusion, DIRAS1 exerts a significant anti-oncogenic function and its expression is significantly downregulated in cervical cancer cells. The m6A modification may be a key mechanism to regulate DIRAS1 mRNA stability and protein translation efficiency in cervical cancer.

ObjectiveThis study aimed to investigate the role of galectin-3 (Gal-3; coded by LGALS3 gene), as a biomarker for MCI in T2DM patients and to develop and validate a predictive nomogram integrating galectin-3 with clinical risk factors for MCI prediction. Additionally, microRNA regulation of LGALS3 was explored.MethodsThe study employed a cross-sectional design. A total of 329 hospitalized T2DM patients were recruited and randomly allocated into a training cohort (n = 231) and a validation cohort (n = 98) using 7:3 ratio. Demographic data and neuropsychological assessments were recorded for all participants. Plasma levels of galectin-3 were measured using ELISA assay. We employed Spearman’s correlation and multivariable linear regression to analyze the relationship between galectin-3 levels and cognitive performance. Furthermore, univariate and multivariate logistic regression analyses were conducted to identify independent risk factors for MCI in T2DM patients. Based on these analyses, a predictive nomogram incorporating galectin-3 and clinical predictors was developed. The model’s performance was evaluated in terms of discrimination, calibration, and clinical utility. Regulatory miRNAs were identified using bioinformatics and their interactions with LGALS3 were confirmed through qRT-PCR and luciferase reporter assays.ResultsGalectin-3 was identified as an independent risk factor for MCI, with significant correlations to cognitive decline in T2DM patients. The developed nomogram, incorporating Gal-3, age, and education levels, demonstrated excellent predictive performance with an AUC of 0.813 in the training cohort and 0.775 in the validation cohort. The model outperformed the baseline galectin-3 model and showed a higher net benefit in clinical decision-making. Hsa-miR-128-3p was significantly downregulated in MCI patients, correlating with increased Gal-3 levels, while Luciferase assays confirmed miR-128-3p’s specific binding and influence on LGALS3.ConclusionOur findings emphasize the utility of Gal-3 as a viable biomarker for early detection of MCI in T2DM patients. The validated nomogram offers a practical tool for clinical decision-making, facilitating early interventions to potentially delay the progression of cognitive impairment. Additionally, further research on miRNA128’s regulation of Gal-3 levels is essential to substantiate our results.

Here we report on a case of a 61-year-old female patient with 7-year history of major depressive disorder with shorter-duration hypomanic episodes who was prescribed with antidepressants which turned out to be ineffective. After a COVID-19 infection, the patient’s clinical presentation became sufficient for the diagnosis of bipolar disorder and she was consistently effective on a mood stabilizer and an atypical antipsychotic. The course of treatment in this case suggests bipolar disorder is not a binary disorder, but a continuous spectrum disorder. For patients suffering from major depressive disorder with shorter-duration hypomanic episodes, mood stabilizers and atypical antipsychotics are possibly more suitable than antidepressants.

With the increasing adoption of composite materials in aircraft construction, traditional anti-icing technologies face significant challenges due to the low thermal conductivity and heat resistance of composite resins. These limitations have spurred the development of lightweight, efficient, durable, and cost-effective integrated anti-icing technologies as a critical area of research. This paper begins with an overview of advancements in electrothermal anti-icing and de-icing technologies for aircraft. It then explores the configurations and applications of functional-structural integration technology for anti-icing and de-icing, emphasizing pivotal technologies and current challenges in this field. Finally, the study forecasts the development trends in the multifunctional integration of thermal conductivity/insulation, anti-icing, and electromagnetic wave transparency/wave-absorbing properties. These advancements are driven by the evolution of composite materialization in aircraft and the progression of multi-electrical/all-electrical technologies. The objective is to provide a comprehensive guide for technological development in anti-icing, aiding researchers and relevant departments to further enhance the application of anti-icing technology in composite material aircraft.

Abstract Background and Aim Both intestinal symptoms and comorbidities exist in irritable bowel syndrome (IBS) patients and influence their quality of life (QOL). More research is needed to determine how these variables impact the QOL of IBS patients. This study aimed to determine which specific factors had a higher influence on QOL and to further compare the effects of intestinal symptoms and comorbidities on QOL. Methods IBS patients were recruited from six tertiary hospitals in different regions of China. QOL, gastrointestinal symptoms, and comorbidities were assessed by different scales. Correlation analysis, multiple linear regression, and mediation model were used for statistics. Results Four hundred fifty‐three IBS patients (39.7% women, mean age 45 years) were included and no significant differences in QOL were found across demographic characteristics. Abnormal defecation (r = −0.398), fatigue (r = −0.266), and weakness (r = −0.286) were found to show higher correlation with QOL. More than 40% of IBS patients were found to suffer from varying degrees of anxiety or depression, and anxiety (r = −0.564) and depression (r = −0.411) were significantly negatively correlated with QOL (P

How to inhibit the formation of point defects in the preparation process of hybrid perovskite for improving the stability and photovoltaic characteristics has been a hot research issue in recent years. Herein, molecular engineering of polyvinylpyrrolidone (PVP) is focused as a Lewis base for an additive to improve the interface matching of hybrid perovskite solar cells. Based on the molecular binding strategy, the film crystallinity, bond binding, interfacial transport, and water resistance can be effectively regulated, resulting in preferred photovoltaic characteristics. Herein, the highest photoelectric conversion efficiency of perovskite solar cells reaches 19.7% as well as the improved stability of solar cells. Moreover, combined with first‐principles calculation, the mechanism of PVP macromolecules inducing perovskite interfacial binding through molecular engineering is revealed, which provides a feasible route for using organic macromolecules to regulate the crystallinity and photovoltaic characteristics of hybrid perovskite devices.

Abstract Background To evaluate the clinical efficacy of different vaginal administration on cervical persistent high-risk human papillomavirus (HR-HPV) infection after excisional treatment for high-grade squamous intraepithelial lesions (HSIL). Methods Six databases (PubMed, EmBase, Cochrane Central, China Knowledge Network database, China Biomedical Literature Service, and WanFang database) were searched to collect randomized controlled trials (RCTs) of various types of vaginal administration compared to no treatment on persistent HR-HPV infection after HSIL excisional treatment, and comprehensive analysis of the clearance of different drugs on HR-HPV was performed using Bayesian reticulation meta-analysis. Results The study analyzed the efficacy of eight interventions, including Interferon, Baofukang, Paiteling, Bletilla striata Sanhuang Powder, Lactobacilli vaginal capsules, Fuanning + Interferon, Interferon + Lactobacilli vaginal capsules, and Interferon + Baofukang, on the clearance of HR-HPV after excisional treatment through pooling and analyzing data from 52 RCTs. The results of the study demonstrated that Interferon + Lactobacilli vaginal capsules [OR 16.0 (95% CIs 8.1–32.0)], Interferon + Fuanning [OR 16.0 (95% CIs 1.1–52.0)], and Interferon + Baofukang [OR 14.0 (95% CIs 6.8–28.0)] were all found to significantly improve postoperative HR-HPV clearance rates when compared to no treatment. Furthermore, when studies with high-risk bias were excluded, Interferon + Lactobacilli vaginal capsules [OR 8.6 (95% CIs 4.7–19.0)] and Interferon + Baofukang [OR 22.0 (95% CIs 8.7–59.0)] were still found to be positively associated with increased postoperative HR-HPV clearance rate. Additionally, the study´s results also indicate that Interferon + Baofukang was effective in enhancing the postoperative HR-HPV clearance rates, mainly when the studies were restricted to a follow-up period of at least 12 months [OR 9.6 (95% CIs 2.9–34.0)]. However, it is important to note that the majority of the trials (29 out of 52, 51.6%) were rated as moderate to high risk of bias, and the certainty of the evidence was moderate to very low. Conclusion The application of various forms of vaginal administration, except for individual use of Lactobacilli vaginal capsules, is more efficacious than no treatment in patients with cervical persistent HR-HPV infection after excisional treatment. However, all of the estimates of the effect size for change in the efficiency of HR-HPV clearance are uncertain. Our confidence in effect estimates and ranking of treatments is low, which needs larger, more rigorous, and longer follow-up RCTs to resolve.

To improve the out-of-plane collaborative performance of timber frames and walls, a metal connector is proposed and designed. A finite element model of the wall is established, and the composite block damage criteria and surface contact behavior are validated. Additionally, one group without metal connectors and three groups with different numbers of metal connectors placed at various positions in traditional residential wall models are established. Using static loading simulation, the influence of different numbers of metal connectors on the out-of-plane damage patterns, deformation characteristics, and shear force distribution is analyzed. The study reveals that top metal connectors significantly reduce the out-of-plane displacement of the top wall by up to 84.6%. Metal connectors have a significant impact on the deformation capacity of brick walls, with a maximum enhancement of 65.3%. The metal connectors in the middle and lower parts transfer the wall loads to the columns, increasing the horizontal shear at the column head by approximately 7%. The connectors in the middle and lower parts effectively improve the collaborative performance of brick walls and wooden frames.

Heterojunction semiconductors have been extensively applied in various optoelectronic devices due to their unique carrier transport characteristics. However, it is still a challenge to construct heterojunctions based on colloidal quantum dots (CQDs) due to stress and lattice mismatch. Herein, HgSe/CsPbBrxI3−x heterojunctions with type I band alignment are acquired that are derived from minor lattice mismatch (~1.5%) via tuning the ratio of Br and I in halide perovskite. Meanwhile, HgSe CQDs with oleylamine ligands can been exchanged with a halide perovskite precursor, acquiring a smooth and compact quantum dot film. The photoconductive detector based on HgSe/CsPbBrxI3−x heterojunction presents a distinct photoelectric response under an incident light of 630 nm. The work provides a promising strategy to construct CQD-based heterojunctions, simultaneously achieving inorganic ligand exchange, which paves the way to obtain high-performance photodetectors based on CQD heterojunction films.

Abstract Ternary copper chalcogenide semiconductors made of copper antimony sulfide (CuSbS2) are promising absorbers for high‐performance photoelectric devices due to their non‐toxic, abundant constituent elements and superior optoelectronic characteristics. However, the presence of a large number of CuSb antisite defects and atomic disorder suppress its performance in photodetection. Herein, a non‐vacuum, facile spin‐coating method based on an organic molecular precursor solution is employed to fabricate the preferable CuSbS2 thin films. With the aid of good adhesion between precursor solution and substrate, compact CuSbS2 thin films are in situ grown on the substrate. Meanwhile, the isoelectronic element of Ag‐doped CuSbS2 thin films can be realized by introducing Ag of varying amounts in the precursor. As a result, the concentration of CuSb defects decreases monotonically as the ratio of Ag/(Ag + Cu) increases from 0% to 5%. Compared with the undoped CuSbS2 device, the 5% Ag‐doped CuSbS2 photodetector achieves the optimum responsibility (R) of 244.48 A W−1, the external quantum efficiency (EQE) of 749.28% and the specific detectivity (D*) of 8.73 × 1012 Jones, which are increased by 76.4, 76.5, and 38.0 times, respectively. This study provides a novel strategy to achieve high‐performance CuSbS2 photodetectors by suppressing the CuSb inversion defects in the Ag‐doped thin film.

Abstract Surface often determines the formation and function of nanoscale thin films and nanomaterials. In correlated vanadium oxides, oxidation states and stoichiometry play important roles in regulating reversible insulator–metal transition (IMT) behaviors. This study presents the surface oxidation state reductions and IMT modulations in vanadium oxides. Oxidation states of vanadium in the surface layer are changed in the nanostructures of vanadium oxides through pulsed hydrogen plasma (PHP). The thickness‐dependent variations are also observed with Raman and X‐ray photoelectron spectroscopy (XPS), and verified in vanadium oxides with different oxidation states. Obvious modulations on IMT behaviors are then demonstrated and related to such variation of surface oxidation states in the VO2 thin film and nanobeam. It is expected that such surface manipulations are beneficial to a better understanding of the IMT in correlated vanadium oxides and the fabrication of advanced functional electronic and photoelectronic devices.

ObjectiveThe present study aimed to use CiteSpace to analyze the status of insomnia and circadian rhythm, identify the hot spots and trends, and provide a basis for future study.MethodThe Web of Science database was searched for studies related to insomnia and circadian from its inception to 14 April 2023. CiteSpace was used to generate online maps of collaboration between countries and authors and revealed hot spots and frontiers in insomnia and circadian rhythm.ResultsWe searched 4,696 publications related to insomnia and circadian rhythm. Bruno Etain was the most prolific author with most publications, i.e., with 24 articles. The USA and the University of California were the leading country and the top institution in this field of study, with 1,672 and 269 articles, respectively. There was active cooperation between institutions, countries, and authors. Hot topics focused on circadian rhythm sleep disorders, circadian clock, light therapy, melatonin, and bipolar disorder.ConclusionBased on the CiteSpace results, we recommend a more active collaboration between various countries, institutions, and authors to conduct clinical and basic research related to insomnia and circadian rhythm. Ongoing research focuses on the interaction of insomnia with circadian rhythms and the corresponding pathways of clock genes and by extension, the role of circadian rhythms in disorders such as bipolar disorder. Modulation of circadian rhythms may be a hot spot for future insomnia therapies (such as light therapy and melatonin).

In this study, we propose a strategy to construct high-performance ultra-thin optical power converters (OPCs) based on Gires–Tournois resonator configurations operating in high-order modes. Despite reducing the absorber thickness by 5.8 to 8.1 times, the proposed ultra-thin OPCs exhibit the same (comparable) energy absorption characteristic and demonstrate superior electrical performance compared to a thick OPC. It is revealed that such high absorption effects originated from the excitation of optical asymmetric Fabry–Perot-type high-order inference resonance modes and the electrical performance enhancement can be attributed to the reduction of the absorber thickness.

The rapid development of the logistics industry poses significant challenges to the sorting work within this sector. The fast and precise identification of moving express parcels holds immense significance for the performance of logistics sorting systems. This paper proposes a motion express parcel positioning algorithm that combines traditional vision and AI-based vision. In the traditional vision aspect, we employ a brightness-based traditional visual parcel detection algorithm. In the AI vision aspect, we introduce a Convolutional Block Attention Module (CBAM) and Focal-EIoU to enhance YOLOv5, improving the model’s recall rate and robustness. Additionally, we adopt an Optimal Transport Assignment (OTA) label assignment strategy to provide a training dataset based on global optimality for the model training phase. Our experimental results demonstrate that our modified AI model surpasses traditional algorithms in both parcel recognition accuracy and inference speed. The combined approach of traditional vision and AI vision in the motion express parcel positioning algorithm proves applicable for practical logistics sorting systems.

The lattice sandwich structure has become a focus of research in aerospace and other fields because of its light weight and high impact resistance. However, research on the impact resistance of lattice sandwich structures is still focused on simulations and experiments and presently lacks theoretical models. In this paper, we proposed a toughening design method based on the failure modes of lattice sandwich structures. The toughening model was established, the dimensional effect was analysed, and the mechanism of synergistic toughening was studied. The results show that the mass of the sandwich structure we designed is reduced by 67.7% compared with the solid part, which has the same outline sizes, and its impact toughness is increased by 119.0%.

With the diversification of spinning order varieties and process parameters, the conventional method of determining production plans through trial spinning no longer satisfies the processing requirements of enterprises. Currently, deficiencies exist in predicting spinning quality relying on manual experience and traditional methods. The back propagation (BP) neural network within the realm of deep learning theory faces challenges in handling time series data, while the long short-term memory (LSTM) neural network, despite its intricate mechanism, exhibits an overall lower predictive accuracy. Consequently, a more precise predictive methodology is imperative to assist production personnel in efficiently ascertaining cotton-blending schemes and processing parameters, thereby elevating the production efficiency of the enterprise. In response to this challenge, we propose an attention-GRU-based cotton yarn quality prediction model. By employing the attention mechanism, the model is directed towards the input features most significantly impacting yarn quality. Real-world performance indicators of raw cotton and process parameters are utilized to predict yarn tensile strength. A comparative analysis is conducted against prediction results of BP, LSTM, and gated recurrent unit (GRU) neural networks that do not incorporate the attention mechanism. The outcomes reveal that the GRU model enhanced with the attention mechanism demonstrates reductions of 56.3%, 38.5%, and 36.4% in root mean square error (RMSE), along with 0.367%, 0.158%, and 0.190% in mean absolute percentage error (MAPE), respectively. The model attains a coefficient of determination R-squared of 0.954, indicating a high degree of fitness. This study underscores the potential of the proposed attention-GRU model in refining cotton yarn quality prediction and its consequential implications for process optimization and enhanced production efficiency within textile enterprises.

The occlusal surfaces of natural teeth have complex features of functional pits and fissures. These morphological features directly affect the occlusal state of the upper and lower teeth. An image generation technology for functional occlusal pits and fissures is proposed to address the lack of local detailed crown surface features in existing dental restoration methods. First, tooth depth image datasets were constructed using an orthogonal projection method. Second, the optimization and improvement of the model parameters were guided by introducing the jaw position spatial constraint, the L1 loss and the perceptual loss functions. Finally, two image quality evaluation metrics were applied to evaluate the quality of the generated images, and deform the dental crown by using the generated occlusal pits and fissures as constraints to compare with expert data. The results showed that the images generated using the network constructed in this study had high quality, and the detailed pit and fissure features on the crown were effectively restored, with a standard deviation of 0.1802mm compared to the expert-designed tooth crown models.

Metal lattice structure has excellent mechanical properties to develop lightweight parts, and selective laser melting (SLM) makes it possible to construct complex lattice parts without molds. Support structures are required in SLM to remove heat away from the process and reduce geometrical distortions. However, traditional support structure generation methods have some problems, such as low generation efficiency, difficulty in the removal and not meeting the fabrication requirements of lattice parts. Therefore, this article proposes a grid-tree composite support structure generation algorithm for lattice parts. First, optimize the build orientation of the lattice parts considering the surface quality of functional features and the processability of lattice structures. Then, identify the frame’s overhang area and the point overhang of lattice structures. Finally, generate the grid-tree composite support structure for lattice parts. We conducted experiments to verify our approach and compare our method with three supports of Magics RP. Experimental results reveal that our method is effective in reducing support volume and warpage deformation.

The components with lattice structure as filling unit have great application potential in aerospace and other fields. The failure of the lattice structure directly affects the functional characteristics of the parts filled with the lattice structure. Aiming at the problem that it is difficult to evaluate the deformation degree of metal lattice structure after mechanical loading in additive manufacturing, firstly, the point cloud model of lattice structure is obtained by using CT scanning and three-dimensional reconstruction, and then the skeleton of lattice structure is automatically extracted based on ${L_1}$ median algorithm. Finally, the deformation angle of rods is measured to evaluate the degree of deformation and damage of parts. In this paper, the deformation evaluation of the rods of the BCC lattice is discussed. The experimental results show that the proposed skeleton extraction technology achieves the evaluation of lattice structure deformation. The experimental model is extended to BCC lattice structure with unit cell number of $n \times n \times n$. When the ratio of the rods with more than 40% severe deformation to all rods in the lattice structure reaches $(2n - 1)/2{n^2}$ it indicates that the lattice structure has undergone a large degree of deformation and should not continue to serve.

A lightweight and low vibration amplitude web design method was investigated to reduce gear weight and noise. It was based upon the relationship between length and orthogonality that the principal stress lines were designed at the gear web. By constructing a vibration control model with gear design parameters, the optimal distance was calculated. By offsetting the principal stress lines at the optimal distance, the lightweight gear web with the low vibration amplitude was then generated. A vibration experimental platform was built to verify the novel gear vibration performances, and it was compared with other gears with the same web's porosity to verify loading performance. The experimental results indicated that compared with the solid gear, the novel gear is 20.50% lighter and with a 29.46% vibration amplitude reduction.

Metastasis is the primary cause of cancer patient death and the elevation of SLC2A5 gene expression is often observed in metastatic cancer cells. Here we evaluated the importance of SLC2A5 in cancer cell motility by silencing its gene. We discovered that CRISPR/Cas9-mediated inactivation of the SLC2A5 gene inhibited cancer cell proliferation and migration in vitro as well as metastases in vivo in several animal models. Moreover, SLC2A5-attenuated cancer cells exhibited dramatic alterations in mitochondrial architecture and localization, uncovering the importance of SLC2A5 in directing mitochondrial function for cancer cell motility and migration. The direct association of increased abundance of SLC2A5 in cancer cells with metastatic risk in several types of cancers identifies SLC2A5 as an important therapeutic target to reduce or prevent cancer metastasis.

Objective: To evaluate the lipid-lowering effect and safety of Gynostemma pentaphyllum (GP) used alone or as adjunctive therapy for dyslipidemia.Methods: Eight databases and three clinical trial registries were searched until January 2022. Randomized controlled trials (RCTs) assessing the effectiveness of GP for dyslipidemia were included. Trial quality was assessed using the Cochrane Risk of Bias Tool 2.0. Data were analyzed by RevMan 5.4 with effects estimated as risk ratio (RR) or mean difference (MD) with 95% confidence intervals (CI).Results: Twenty-two RCTs involving 2,407 dyslipidemia participants were included. Regarding the risk of bias, 14 RCTs had some concerns, seven RCTs were high, and one trial was low. GP was comparable to n-3 fatty acids (RR 0.89, 95% CI 0.62–1.28) and red yeast rice (RR 0.33, 95% CI 0.1–1.12) on normalization of serum lipids. GP plus n-3 fatty acid was superior in normalization of triglycerides (TG) and total cholesterol (TC) than n-3 fatty acids (RR 1.34, 95% CI 1.01–1.77). GP was similar to lipid-lowering agents (statins, fibrates, and n-3 fatty acids) in regulating TG, TC, and high-density lipoprotein cholesterol (HDL-C). GP plus lipid-lowering agents were superior to lipid-lowering agents in TG (MD −0.65 mmol/L, 95% CI −1.03 to −0.28), LDL-C (MD −0.57 mmol/L, 95% CI −1.07 to −0.08), and HDL-C (MD 0.15 mmol/L, 95% CI 0.11–0.20). GP was inferior to red yeast rice in TC (MD 0.64 mmol/L, 95% CI 0.15–1.13), TG (MD 0.43 mmol/L, 95% CI 0.15–0.71), and HDL-C (MD −0.25 mmol/L, 95% CI −0.47 to −0.04). GP had fewer adverse events than lipid-lowering drugs.Conclusion: Very low certainty evidence showed that GP’s effects on TC, TG, and HDL-C were comparable to that of lipid-lowering agents. Low certainty evidence showed that red yeast rice was superior to GP in TC, TG, and HDL-C. Low to moderate certainty evidence showed that the effects of GP plus lipid-lowering agents were superior to that of lipid-lowering agents on TG, LDL-C, and HDL-C. GP use for more than 8 weeks appears safe.Systematic Review Registration:https://inplasy.com/, identifier INPLASY202210135.

A new method for lightweight gear design based on Michell Trusses Design method was investigated in this research to compare with the traditional Topology Optimization method. A workflow with detailed steps was established using example of constructing Michell Trusses to make lightening holes at the gear's web. In this workflow, Michell Trusses are generated from a set of concentric circles. By solving the equation with the variables of concentric circles (complexity), the optimal orthogonality of trusses can be determined. Real experiments were conducted to compare the two design methods in the aspects of design costs and product mechanical property, including recording the time consumed in each link and detecting the force of failure of gears by a testing platform. The results indicate that this new method can significantly reduce design time while maintain the same power-to-weight ratio as the Topology Optimization design, which potentially provide a new research direction for lightweight structural modeling in mechanical engineering and aviation industry. The experimental product developed in this research demonstrated the promising prospects for real world applications.

Abstract Background The reformulated simethicone emulsion from Berlin Chemical AG might develop white flocculate precipitate covering the gastric mucosa when used before esophagogastroduodenoscopy (EGD). We aim to investigate whether combining the reformulated simethicone emulsion with 5% sodium bicarbonate solution could prevent the development of white precipitate and improve visibility during EGD. Methods Our clinical study involved 523 patients. They were randomly assigned to two groups. In Group A, patients received a warm solution containing 30 ml 5% sodium bicarbonate solution and 15 ml reformulated simethicone emulsion. In Group B, patients received 45 ml 40 °C lukewarm water. Visibility scores were recorded and analyzed. Flushes, volume of flush water, overall time taken for EGD and complications during or after the procedure were also recorded. Results We found that no white precipitate was observed during EGD in Group A. Moreover, visibility scores in Group A were significantly lower (P

Reversible insulator–metal transition (IMT) and structure phase change in vanadium dioxide (VO2) remain vital and challenging with complex polymorphs. It is always essential to understand the polymorphs that coexist in desired VO2 materials and their IMT behaviors. Different electrical properties and lattice alignments in VO2 (M) and VO2 (B) phases have enabled the creation of versatile functional devices. Here, we present polymorphous VO2 thin films with coexistent VO2 (M) and VO2 (B) phases and phase-dependent IMT behaviors. The presence of VO2 (B) phases may induce lattice distortions in VO2 (M). The plane spacing of (011)M in the VO2 (M) phase becomes widened, and the V-V and V-O vibrations shift when more VO2 (B) phase exists in the VO2 (M) matrix. Significantly, the coexisting VO2 (B) phases promote the IMT temperature of the polymorphous VO2 thin films. We expect that such coexistent polymorphs and IMT variations would help us to understand the microstructures and IMT in the desired VO2 materials and contribute to advanced electronic transistors and optoelectronic devices.

The application of additive manufacturing in the field of aviation hydraulics greatly improves the design freedom of hydraulic valve internal flow channels. Pressure loss in hydraulic valve internal flow channels is a primary factor that designers need to consider, and the rapid prediction of pressure loss is very helpful for flow channel design. At present, most studies only focus on how much the pressure loss in an additive manufacturing (AM) hydraulic channel is reduced compared with an original hydraulic channel, and a mathematical model of pressure loss in an AM curved channel is still lacking. In this paper, the pressure loss in a curved flow channel was firstly studied, and the main parameters affecting the pressure loss were determined using the dimensionless analysis method. Using computational fluid dynamics simulation, the relationships between the flow channel diameter, the flow channel length, the flow channel curvature radius, the fluid velocity and pressure loss were studied. According to the multiple regression analysis method, the mathematical model of pressure loss in aviation hydraulic channels was developed, and the model was solved based on the orthogonal experimental results. The pressure loss in the flow channel samples fabricated using selective laser melting was tested, and the results showed that the average error between the test results and the mathematical model calculation results was 7.72%. This model can be used to quickly predict the pressure loss in curved flow channels in the aviation hydraulic field.

Both the magnetic field treatment and the microwave treatment can affect the concentration of aroma compounds in liquor, but there are few researches on the composite treatment that combining the two. In this study, the effects of separate pulsed magnetic field (PMF), microwave field, and PMF-microwave composite treatment on Chinese soy-sauce flavor liquor were investigated. The concentration changes of various aroma compounds in liquor were analyzed by gas chromatograph, and the change of water-ethanol association structure in liquor was analyzed by proton nuclear magnetic resonance spectroscopy. Sensory evaluation of liquor subjected to different processes was carried out. The results showed that the sensory characteristic of liquor after composite treatment was improved, and the change of aroma compounds is close to that in traditional aging. The PMF treatment can significantly improve the taste of liquor. The results prove that the PMF-microwave composite treatment is a potential artificial aging method.

Objective: To determine the effect of gut microbiota on a rat model of post-traumatic stress disorder (PTSD) and explore the correlation of gut microbiota with behavior and neurotransmitters. Methods: We established a single prolonged stress (SPS) model to examine the pathogenesis of PTSD on rat behavior, gut microbiota, and neurotransmitter levels. Rats were separated into control and model groups, and neurotransmitter levels were measured using enzyme linked immunosorbent assay. Then, 16 S rRNA sequencing was used to compare the gut microbiota between the control and model groups. Results: Compared with those in the control group, freezing time significantly increased, while number of standing upright, crossing frequency, time spent in the central arena, and total distance traveled were significantly reduced in the model group after exposure to SPS (all P

Background: Maternal lipid intake in the early postnatal period has a long-term effect on the possibility of fatty liver formation in children; besides, the importance of lipid consumption during lactation for children’s health has been suggested. Green tea extract (GTE) contains abundant catechins, and it has been reported to improve lipid metabolism and prevent fatty liver. Objective: The aim of this study was to examine the effects of maternal GTE intake during lactation on hepatic lipid accumulation in adult male rats exposed to a continuous high-fat (HF) diet from the foetal period. Methods: Pregnant Wistar rats received diets containing 13% (control-fat, CON) or 45% (high-fat, HF) fat. CON-fed mothers received the same diet during lactation, whereas HF-fed mothers received either HF diet alone or HF diet supplemented with 0.24% GTE. At weaning, male offspring were divided into three groups, i.e. CON/CON/CON, HF/HF/HF (HF-offspring) or HF/HF+GTE/HF (GTE-offspring), and were fed until 51 weeks. Results: A significant hepatic triglyceride (Tg) accumulation was observed in the HF-offspring when compared with the other offspring. This is presumed to be caused by the promotion of Tg synthesis derived from exogenous fatty acid due to a significant increase in diacylglycerol O-acyltransferase 1 and a decrease in Tg expenditure caused by decreasing microsomal triglyceride transfer protein (MTTP) and long-chain acyl-CoA dehydrogenase. On the other hand, attenuated hepatic Tg accumulation was observed in the GTE-offspring. The levels of the hepatic lipid metabolism-related enzymes were improved to the same level as the CON-offspring, and particularly, MTTP was significantly increased as compared with the HF-offspring. Conclusion: This study indicates the potential protective effects of maternal GTE intake during lactation on HF diet-induced hepatic lipid accumulation in adult male rat offspring and the possible underlying mechanisms.

The aim of this study was to develop a prototype three-dimensional optical motion capture system based on binocular stereo vision, Back-propagation (BP) Neural Network and 3D compen-sation method for accurate and real-time recording of mandibular movement. A specialized 3D method of compensation to eliminate the involuntary vibration motions by human heart beating and respiration. A kind of binocular visual 3D measurement method based on projection line and a calibration method based on BP neural network is proposed to solve the problem of the high complexity of camera calibration process and the low accuracy of 3D measurement. The accuracy of the proposed system is systematically evaluated by means of electric platform and clinical trials, and the root-mean-square is 0.0773 mm. Finally, comparisons with state-of-the-art methods demonstrate that our system has higher reliability and accuracy. Meanwhile, the motion trajectory-tracking system is expected to be used in the diagnosis of clinical oral diseases and digital design of restoration.

Objective: To observe the effect and mechanism of Xiangsha Liujunzi decoction (XSLJZD) drug serum on gastric antrum smooth muscle cells (SMCs) in rats with functional dyspepsia (FD). Methods: Gastric antrum SMCs from rats with FD were isolated, cultured, and then divided into six groups as follows: control, model, domperidone, low-dose XSLJZD (LXSLJZD), medium-dose XSLJZD (MXSLJZD), and high-dose XSLJZD (HXSLJZD). Each group was administered the corresponding drug serum for intervention. Drug serum intervention conditions and proliferative activity of SMCs were tested by cholecystokinin octapeptide. Ghrelin, gastrin, somatostatin, and substance P (SP) levels were measured by ELISA. Somatostatin and SP mRNA expression was measured by real-time PCR. Results: A concentration of 10% drug serum for 24 h was decided to be the best intervention condition for later study. The mean optical density value in the model group was lower than that in the control group (P = .001). Optical density values in the domperidone and HXSLJZD groups were higher than those in the model group (P = .025, P = .032, respectively). Gastrin, SP, and ghrelin levels in the model group were lower (P = .007, P = .037, P = .005, respectively), but somatostatin levels were higher, compared with those in the control group (P = .031). Gastrin, SP, and ghrelin levels in the domperidone, MXSLJZD, and HXSLJZD groups were higher than those in the model group (all P

Gut microbiota dysbiosis is closely associated with ulcerative colitis (UC). Prebiotic therapy is a potential approach for UC management especially remission maintaining. Xylo-oligosaccharide (XOS) is an efficient prebiotic with proven health benefits and few side effects. However, the effects of XOS on the gut microbiota of patients with UC have not been investigated previously. The aim of this study was to evaluate the prebiotic effects of XOS on the fecal microbiota of patients with UC in clinical remission using an in vitro fermentation model. Five patients with UC in clinical remission and five healthy volunteers were enrolled in this study. Fresh fecal samples of UC patients were diluted and inoculated in yeast extract, casitone and fatty acid (YCFA) medium alone or with XOS. After fermentation for 48 h, samples were collected for 16S rDNA sequencing to investigate the gut microbiota composition. Differences in the gut microbiota between healthy volunteers and UC patients in clinical remission were detected using original fecal samples. Subsequently, the differences between the YCFA medium alone or with XOS samples were analyzed to illustrate the effects of XOS on the gut microbiota of UC patients. In both principal coordinate analysis (PCoA) and principal component analysis (PCA), the fecal samples of UC patients differed from those of healthy volunteers. Linear discriminant analysis effect size (LEfSe) analysis revealed that the relative abundances of g_Roseburia and g_Lachnospiraceae_ND3007_group were higher in healthy volunteers than in UC patients, while o_Lactobacillales abundance showed the opposite trend (P < 0.05). Wilcoxon rank-sum test bar plot showed that the abundances of g_Eubacterium_halli_group and g_Lachnospiraceae_ND3007_group were higher in the healthy volunteers than in the UC patients (P < 0.05). In addition, in UC patients, the Wilcoxon rank-sum test showed that XOS fermentation promoted the growth of bacterial groups including g_Roseburia, g_Bifidobacterium, and g_Lactobacillus, which is beneficial for recovery of intestinal diseases. These results suggest that XOS can relieve dysbiosis in the feces of UC patients in clinical remission and thus represent a potential prebiotic material for maintaining remission.

The objective of this bibliometric review was to identify the volume, breadth, and characteristics of clinical studies evaluating Tai Chi published between January 2010 and January 2020. Five English and four Chinese language databases were searched. Following independent screening, 1018 eligible publications representing 987 studies were identified, which was a three-fold increase from the previous decade. Most common were randomized controlled trials (548/987, 55.5 %), followed by systematic reviews (157/987, 15.9 %), non-randomized controlled clinical studies (152/987, 15.4 %), case series (127/987, 12.9 %) and case reports (3/987, 0.3 %) that were conducted in China (730/987, 74.0 %), followed by the United States of America (123/987, 12.5 %) and South Korea (20/987, 2.0 %). Study participants were mostly in the adult (55.2 %) and/or older adult (72.0 %) age groups. The top ten diseases/conditions were hypertension, chronic obstructive pulmonary disease, diabetes, knee osteoarthritis, heart failure, depression, osteoporosis/osteopenia, breast cancer, coronary heart disease and insomnia. A quarter of the studies enrolled healthy participants to evaluate the effects of Tai Chi on health promotion/preservation, balance/falls, and physiological/biomechanical outcomes. Yang style Tai Chi was the most popular, followed by Chen and Sun style. Tai Chi was mostly commonly delivered face-to-face by a Tai Chi instructor in group settings for 60 min, three times a week, for 12 weeks. Most studies (93.8 %) reported at least one outcome in favor of Tai Chi. Adverse events were underreported (7.2 %). Over half fell short of expected intervention reporting standards, signalling the need for Tai Chi extensions to existing guidelines.

High strength and tough structures are beneficial to increasing engineering components service span. Nonetheless, improving structure strength and, simultaneously, toughness is difficult, since these two properties are generally mutually exclusive. Biological organisms exhibit both excellent strength and toughness. Using bionic structures from these biological organisms can be solutions for improving these properties of engineering components. To effectively apply biological models to design biomimetic structures, this paper analyses strengthening and toughening mechanisms of six fundamentally biological models obtained from biological organisms. Numerical models of three-point bending test are established to predict crack propagation behaviors of the six biological models. Furthermore, the strength and toughness of six biomimetic composites are experimentally evaluated. It is identified that the helical model possesses the highest toughness and satisfying strength. This work provides more detailed evidence for engineers to designate bionic models to the design of biomimetic composites with high strength and toughness.

Automatic replacement of bobbins on the frame is one of the core problems that must be solved in the textile industry. In the process of changing the bobbin, it is faced with problems such as the position offset of the bobbin, the loosening and deformation of the bobbin, which will lead to the failure of replacing the bobbin. Therefore, it is necessary to initialize the creel coordinates regularly, also considering the labor intensity and poor reliability of manual positioning. This paper proposes an automatic creel positioning method based on monocular vision. Firstly, the industrial camera was installed on the drum changing manipulator controlled by the truss system, and each yarn frame in the yarn area was inspected. Secondly, the end face image of the creel was collected at a reasonable distance, and the collected images were transmitted to the computer in real time through the Ethernet bus. Thirdly, the center coordinates (x, y) and radius r of the creel were marked by the improved Hough circle detection algorithm. Finally, the coordinate deviation of the creel was calculated and transmitted to the system controller to realize deviation correction. Before the test, the creel positioning markers were specially designed and the camera was calibrated. Thus, the influence of image complex background, creel end roughness, reflection and other factors can be reduced, and the image processing speed and positioning accuracy can be improved. The results show that the positioning effect of this method is fine when the distance between the center of the camera lens and the center of the end face of the creel is 170~190 mm. Moreover, when the distance is 190 mm, the positioning effect is the best, with an average error of only 0.51 mm. In addition, the deviation between the center coordinate and the radius of the end face of the marker is also very small, which is better than the requirements of bobbin yarn changing accuracy.

Background: Type 2 diabetes (T2D) is a common metabolic disease. Variants in human IGF2 mRNA binding protein 2 (IMP2/IGF2BP2) are associated with increased risk of T2D. IMP2 contributes to T2D susceptibility primarily through effects on insulin secretion. However, the underlying mechanism is not known. Methods: To understand the role of IMP2 in insulin secretion and T2D pathophysiology, we generated Imp2 pancreatic β-cell specific knockout mice (βIMP2KO) by recombining the Imp2flox allele with Cre recombinase driven by the rat insulin 2 promoter. We further characterized metabolic phenotypes of βIMP2KO mice and assessed their β-cell functions. Results: The deletion of IMP2 in pancreatic β-cells leads to reduced compensatory β-cell proliferation and function. Mechanically, IMP2 directly binds to Pdx1 mRNA and stimulates its translation in an m6A dependent manner. Moreover, IMP2 orchestrates IGF2-AKT-GSK3β-PDX1 signaling to stable PDX1 polypeptides. In human EndoC-βH1 cells, the over-expression of IMP2 is capable to enhance cell proliferation, PDX1 protein level and insulin secretion. Conclusion: Our work therefore reveals IMP2 as a critical regulator of pancreatic β-cell proliferation and function; highlights the importance of posttranscriptional gene expression in T2D pathology.

Tripartite motif-containing 32 (TRIM32) is an E3 ubiquitin ligase with multiple functions. In this study, we amplified TRIM32 gene from the Cherry Valley duck, and its cDNA sequence contained an open reading frame of 1,950 bp that encodes 649 amino acids. Duck TRIM32 (duTRIM32) mRNA was expressed in all tissues tested. A series of immune-related genes that were induced by viral infection, including interferon alfa, IL-1β, retinoic acid–inducible gene-I, Mx, and OAS, were regulated by duTRIM32 expression. DuTRIM32 overexpression inhibits duck Tembusu virus (DTMUV) replication in the early stages of viral infection. Knockdown of duTRIM32 expression by siRNA reduced the ability of duck embryo fibroblast cells to mount a type Ⅰ interferon response to DTMUV. Therefore, our results suggest that the duTRIM32-mediated signal pathway plays an essential role in DTMUV infection-induced innate immune response.

Objectives: The corona virus disease-2019 (COVID-19) pandemic spread globally, and we aimed to investigate the psychosocial impact on healthcare workers (HWs) in China during the pandemic.Methods: In this systematic review and meta-analysis, we searched seven electronic databases for cross-sectional studies on psychosocial impact on HWs in relation to COVID-19 from January 1, 2020 to October 7, 2020. We included primary studies involving Chinese HWs during the pandemic, and data were extracted from the published articles. Our primary outcome was prevalence of anxiety, depression, and stress disorders. We pooled prevalence value with their 95% confidence interval using random effect models and assessed study quality on the basis of an 11-item checklist recommended by the Agency for Healthcare Research and Quality. The study protocol was registered in PROSPERO (CRD42020195843).Results: We identified 25 articles comprising a total of 30,841 completed questionnaires and 22 studies for meta-analysis. The prevalence of anxiety, depression, and stress disorders was 34.4% (29.5–39.4%), 31.1% (24.5–37.7%), and 29.1% (24.3–33.8%) for HWs. The pooled prevalence of anxiety disorders for HWs from late January to early February was 46.4% (42.9–49.9%), significantly higher than those in mid-term February (28.0%, 23.9–32.1%) and after late February (27.6%, 16.0–39.2%). The pooled prevalence of depression disorders for HWs from late January to early February was 46.5% (38.8–54.2%), significantly higher than those in mid-term February (27.1%, 19.8–34.5%) and after late February (32.9%, 16.2–49.5%). HWs working in Hubei Province had a higher prevalence of anxiety (37.9 vs. 30.8%) and a lower prevalence of depression (27.5 vs. 34.7%) than those working in other regions. Nurses had a higher prevalence of anxiety (44.1 vs. 29.0%) and depression (34.1 vs. 29.2%) than other HWs.Conclusions: About one-third of HWs in China suffered anxiety, depression, and stress at the early epidemic of COVID-19. HWs in Hubei Province, especially nurses, had a higher prevalence of psychological disorders. During the pandemic, a negative psychological state may persist in a proportion of Chinese HWs, fluctuating with the control of the pandemic. The long-term impact should continue to be observed. Attention should be paid to HWs for their psychological impact due to the pandemic.Systematic Review Registration: The study protocol was registered with PROSPERO (CRD42020195843).

Blocked impurity band (BIB) detectors play an important role in astronomical detection from the mid-infrared to THz region. We demonstrated the field dependence of the photoresponse in BIB detectors using both experimental results and theoretical calculations. It was found that there is a gain operation region between the saturation voltage of the photocurrent and the breakdown voltage of the dark current. The photoconduction gain in the gain operation region is several orders of magnitude larger than that in the other voltage range. Considering the field-assisted thermal ionization process and the photon-assisted impact ionization process, the gain operation mode can be well explained. Utilizing the gain operation mode, Ge:B BIB detectors can even detect the objects with a temperature as low as 10 K. We provide a theoretical basis to optimize BIB detectors and further improve their detection performance.

Risk loci for type 2 diabetes (T2D) reside in pancreatic islet enhancers. Here, the authors generate high-resolution maps of islet chromatin conformation using Hi-C which they combine with ATAC-seq and ChIP-seq data to annotate candidate target genes of enhancers and validate IGF2BP2 activity in mouse islets.

To solve the problem of low efficiency, the complexity of the interactive operation, and the high degree of manual intervention in existing methods, we propose a novel approach based on the sparse voxel octree and 3D convolution neural networks (CNNs) for segmenting and classifying tooth types on the 3D dental models. First, the tooth classification method capitalized on the two-level hierarchical feature learning is proposed to solve the misclassification problem in highly similar tooth categories. Second, we exploit an improved three-level hierarchical segmentation method based on the deep convolution features to conduct segmentation of teeth-gingiva and inter-teeth, respectively, and the conditional random field model is used to refine the boundary of the gingival margin and the inter-teeth fusion region. The experimental results show that the classification accuracy in Level_1 network is 95.96%, the average classification accuracy in Level_2 network is 88.06%, and the accuracy of tooth segmentation is 89.81%. Compared with the existing state-of-the-art methods, the proposed method has higher accuracy and universality, and it has great application potential in the computer-assisted orthodontic treatment diagnosis.

Perovskite materials have been widely used to fabricate solar cells, laser diodes and other photodevices, owing to the advantage of high absorption coefficient, long carrier life and shallow defect energy levels. However, due to easy hydrolysis, it is difficult to fabricate perovskite micro-nano devices. Herein, we developed a water-free device fabrication technology and fabricated a two-dimensional (C6H5C2H4NH3)2PbI4 ((PEA)2PbI4) two-color blue-green light detector, which exhibits high detection performance under the illumination of two-color lasers (λ = 460 nm, 532 nm). Compared with bulk devices, the dark current of the fabricated devices (10−11 A) was reduced by 2 orders of magnitude. The peak responsivity and detectivity are about 1 A/W and 1011 Jones, respectively. The photodetection performance of the device is basically the same under the two-color lasers. Our results provide a new process to fabricate perovskite microelectronic devices, and the fabricated photodetector shows great application prospects in underwater detection, owing to the blue-green window existing in water.