Search

Introduction. In healthcare, the need to pay more attention to the achievement of two objectives within the society arises: health promotion and prevention in terms of nutrition, good education, sport, and health education. Scientific evidence shows that adequate health standards must be learned since childhood through the help of parents and appropriate school projects. Parental intervention must be appropriate to support the responsibility of their children’s health. In oral health, it has been established for many years that there is a correlation between parental behaviors and lifestyles and children’s attitude. The aim of this study is to verify the close relation between behaviors, habits, lifestyles, and the knowledge of parents about their oral health and, consequently, their focus and care for their own children’s oral health. Furthermore, the awareness of parents about the importance and use of fluorine was to be determined. Materials and Methods. The study lasted 15 months and was conducted from April 2018 to July 2019: an anonymous 29-question questionnaire was administered to all parents who accompanied their children (aged between 3 and 12 years) going under treatment in the Pediatric Dentistry Unit of the University Hospital Policlinico Umberto I, Rome. Anamnestic data, sociodemographic context (e.g., educational level and occupation), oral health habits, and prevention of parents and children and fluoride knowledge were investigated. The study received ethical approval. 204 questionnaires were collected. The data gathered were recorded with a specifically designed computer program and collected and analyzed using a Microsoft Excel 10 database. Data were evaluated using standard statistical analysis software; descriptive statistics including mean ± SD values and percentage were calculated for each variable. The relationship between the age of parents, between mother or father and the parents’ degree of education levels, and the knowledge for their own children’s oral health was explored using the chi-square test of homogeneity and Fisher’s exact test ( P value of < 0.05 considered as statistically significant). Results. From the acquired data, it is possible to deduce that the major respondents were mothers aged from 36 to 45, while only a small part were fathers aged above 45 years. Questions related to parents’ oral hygiene habits were included in the questionnaire, and from the sample taken into consideration, it emerges that 64.7% of the respondents (67.1% mothers and 57.7% fathers) periodically attend a dental office for a checkup, 20.9% tend to postpone the treatment, and 15.2% go there just for emergency. Some of the questions showed that 80% of the interviewed subjects use fluoride toothpaste for their child’s oral hygiene. Conclusion. Prevention in childhood, in addition to being synonymous with monitoring the oral health of the child, means first of all to pay attention to parents who are the main behavioral reference. It emerged that there is no adequate knowledge about fluorine, especially when the subjects have a low educational level. A role of fundamental importance for the diffusion of adequate concepts in the field of oral hygiene is covered, according to the data received from the study carried out, by the dentist and dental hygienist.

PURPOSE: To provide the most relevant aspects of the etiology, prevention, and management of bleeding in routine implant surgery. MATERIALS and METHODS: A comprehensive and systematic electronic search was conducted in MEDLINE, EMBASE, Cochrane Central Register of Controlled Trials, and Cochrane Database of Systematic Reviews databases until Jun 2021. Further references of interest were retrieved from bibliographic lists of the selected articles and the “Related Articles” feature of PubMed. Eligibility criteria were papers about bleeding, hemorrhage or hematoma associated with routine implant surgery on human subjects. RESULTS: Twenty reviews and 41 case reports fulfilled eligibility criteria and were included in the scoping review. Involved implants were mandibular in 37 and maxillary in 4 cases. The major number of bleeding complications was in the mandibular canine region. The most injured vessels were sublingual and submental arteries, mainly due to perforation of the lingual cortical plate. Time to bleeding occurred intraoperatively, at suturing, or postoperatively. The most reported clinical manifestations were swelling and elevation of the mouth floor and the tongue with partial or complete airway obstructions. The first aid to manage airway obstruction was intubation and tracheostomy. For active bleeding control, gauze tamponade, manual or digital compression, hemostatic agents and cauterization were applied. When conservative procedures failed, hemorrhage was controlled by intra- or extraoral surgical approaches to ligate injured vessels or by angiographic embolization. CONCLUSIONS: The present scoping review provides knowledge and evidence on the most relevant aspects of the etiology, prevention, and management of implant surgery bleeding complications.

A palatal fistula is a pathological condition that connects the nasal cavities with the oral cavity. An oral–nasal fistula is reported as a possible post-surgical complication after the removal of oral carcinomas. The presence of a palatal fistula affects the patient’s quality of life, making it necessary to apply a prosthetic device, such as a palatal plate, to keep the nasal cavities separated from the oral one. There are several surgical techniques to close a palatal fistula, but it is not possible to define the optimal technique as the approach is extremely dependent on the characteristics of the fistula. The aim of this article is to propose a minimally invasive technique to reduce the size of palatal fistulae and to reduce the surgical difficulty (NSPF). A total of 20 patients fulfilled the inclusion criteria and were checked every two weeks. The fistula was injured with a needle every 2 weeks. Fifteen patients who healed with complete closure of the fistula reported no need for a palatal protection plate to eat, drink and speak normally. It is possible to conclude that the NSPF protocol is a valid approach for the non-surgical reduction of palatal fistulae, and it is possible, when the appropriate conditions are present, to achieve complete closure.

The aim of this study was to evaluate the 2-year follow-up results of early implant placement with simultaneous peri-implant augmentation using an acellular dermal matrix (ADM) and a synthetic bone substitute in the aesthetic zone. Twenty subjects were enrolled in this study, they were either males (eight) or females (12), with a mean age of 47.8±4.45 years and each patient was treated with one implant. Simultaneous contour augmentation with guided bone regeneration was performed using synthetic bone particles (maxresorb®) and an ADM (mucoderm®). Keratinized mucosa width (KMW) and gingival thickness (GT) were assessed at baseline, 1, 3, 6, 12 and 24 months. Marginal bone loss, probing pocket depth, bleeding on probing and plaque index were also recorded. GT and KMW increased between baseline and 1 month, slightly decreased between 1 month and 12 months (P0.001) and remained stable between 12 and 24 months (P0.001). After 2 years, mean marginal bone loss level was 0.51 ± 0.63mm, with no probing pocket depth values5mm and no concomitant signs of inflammation registered. Pink aesthetic score was 8.3. Combining an ADM and guided bone regeneration with early implant placement revealed a significant increase of 1.9mm for GT and 1.6mm for KMW after 2 years, showing good patient satisfaction regarding the aesthetic outcomes of soft tissues and prosthetic crown.

Objective This study aimed to compare the analgesic effect of ibuprofen 400 mg given 30 min before or immediately after third molars surgery under local anaesthesia. Materials and methods The single-centre, randomized, split-mouth, triple-blind, clinical trial involved 38 outpatients, for a total of 76 bilateral symmetrical fully bone impacted mandibular third molars. Each patient was undergone to separate surgical sessions for the right and left side, and ibuprofen was randomly administered 30 min before or immediately after the intervention. Study participants recorded pain intensity using Numerical Rating Scale-11, the timing of rescue therapy intake and overall tablets consumption over 3 days. Results The overall pain intensity score was lower in the group receiving ibuprofen immediately after (3.13 ± 2.46) than before (3.58 ± 2.40) surgery, with statistically significant differences only on the second and third days. The mean time to the first using rescue therapy was longer in the postoperative (598.33 ± 422.62 min) than in the preoperative (406.25 ± 149.79 min) analgesic treatment group (p = .123). The number of supplemented ibuprofen tablets did not differ (p = .530) between both groups. Conclusions Within the limits of the present study, ibuprofen administration immediately after surgery seemed to be more effective than preoperative administration.

Background: Artificial intelligence (AI) has taken hold in public health because more and more people are looking to make a diagnosis using technology that allows them to work faster and more accurately, reducing costs and the number of medical errors. Methods: In the present study, 120 panoramic X-rays (OPGs) were randomly selected from the Department of Oral and Maxillofacial Sciences of Sapienza University of Rome, Italy. The OPGs were acquired and analyzed using Apox, which takes a panoramic X-rayand automatically returns the dental formula, the presence of dental implants, prosthetic crowns, fillings and root remnants. A descriptive analysis was performed presenting the categorical variables as absolute and relative frequencies. Results: In total, the number of true positive (TP) values was 2.195 (19.06%); true negative (TN), 8.908 (77.34%); false positive (FP), 132 (1.15%); and false negative (FN), 283 (2.46%). The overall sensitivity was 0.89, while the overall specificity was 0.98. Conclusions: The present study shows the latest achievements in dentistry, analyzing the application and credibility of a new diagnostic method to improve the work of dentists and the patients’ care.

The authors wish to make the following correction to this paper [...]

Musculoskeletal disorders (MSDs) are occupational illnesses concerned with different classes of professionals; dental hygienists are among those. The aim of this trial is to evaluate MSDs prevalence and significance of the symptoms in a sample of dental hygienists.A 20-question questionnaire was administered to a sample of dental hygienists, via social networks. The variables taken into consideration were personal data, hours of sport, working habits, years of professional activity, working hours and number of patients per week, presence or absence of pain.Data were evaluated using standard statistical analysis software, and an Excel database was created. Descriptive statistics were calculated for each variable. Group comparison was assessed by the chi-square test of homogeneity and Fisher's exact test. (p-value0.05 as significant).468 questionnaires were examined: 396 females (85%) and 72 males (15%). The prevailing age was between 25 and 35. Among them, 91% referred to be suffering or have suffered MSDs. The most relevant affected muscular areas are neck (30.6%), shoulder (25.0%) and lumbosacral region (23.3%); the remaining 21.1% is divided among the other regions. Association and statistical analysis among the different variables showed how presence of MSDs negatively influences absenteeism and work performance; further research regarding ergonomics, type of seat, stretching and workout prevention would be important to strengthen the results collected.Musculoskeletal disorders diffusion among dental hygienists is particularly high due to lack of information; the majority of interviewees showed very little awareness of it; this led to a lack of effort in facing or possibly preventing these pathologies.

Maxillofacial ballistic trauma represents a devastating functional and aesthetic trauma. The extensive damage to soft and hard tissue is unpredictable, and because of the diversity and the complexity of these traumas, a systematic algorithm is essential. This study attempts to define the best management of maxillofacial ballistic injuries and to describe a standardized, surgical and prosthetic rehabilitation protocol from the first emergency stage up until the complete aesthetic and functional rehabilitation. In low-velocity ballistic injuries (bullet speed 600 m/s) are associated with an extensive hard and soft tissue disruption, and the management should be based on a three-stage reconstructive algorithm: debridement and fixation, reconstruction, and final revision. Rehabilitating a patient with ballistic trauma is a multi-step challenging treatment procedure that requires a long time and a multidisciplinary team to ensure successful results. The prosthodontic treatment outcome is one of the most important parameters by which a patient measures the restoration of aesthetic, functional, and psychological deficits. This study is a retrospective review: twenty-two patients diagnosed with outcomes of ballistic traumas were identified from the department database, and eleven patients met the inclusion criteria and were enrolled.

to retrospectively evaluate clinical and radiographic outcomes of immediate, flapless full-arch prostheses, supported by 4/6 implants according to prosthetic-driven planning and guided surgery.The study involved 28 edentulous patients (20 female/8 males; average age 67.75 ± 8.627 years), 32 prostheses (17 all-on-4/15 all-on-6) and 164 implants. The Implants survival, prostheses success/survival, peri-implant marginal bone loss, incidence of biological and prosthetic complications were evaluated. Multiple linear regression analysis was performed to analyze the influence of implant and patient characteristics on marginal bone loss.Cumulative implant survival rate was 89.7% for all-on-four (seven failures) and 99.0% for all-on-six (one failure) after a mean follow-up of 6.46 ± 2.236 years (range 1-10 years). Cumulative prosthesis success rate was 51.5% (58.8% for all-on-four/ 43.8% for all-on-six). Prosthesis survival rate was 88.2% for all-on-four. No failure was registered in all-on-six. Mean value of marginal bone loss was 1.38 ± 0.1.28 mm at 5-year and 2.09 ± 0.56 mm at 10-year follow-up. No difference was found in the mean value of marginal bone resorption between all-on-four (1.56 ± 1.61 mm) and all-on-six (1.20 ± 0.85 mm) (p = 0.104) and between tilted (1.22 ± 1.29 mm) and axial implants (1.44 ± 1.27 mm) (p = 0.385) after 5-year follow-up. The incidence of biological complications was 1.0% in all-on-six (one mucositis) and 10.3% in all-on-four (two peri-implantitis). Prosthetic complications affected teeth of final rehabilitations with 3 detachments, 10 chippings or fractures, and 3 severe occlusal wears.Based on the results and within the limitations of the present study, the implant-supported hybrid prosthesis according to prosthetic-driven planning and guided surgery showed to be an efficient, safe, and effective approach to rehabilitate edentulous jaws.

The aim of this cross-sectional study was to investigate the association between carotid intima-media thickness (c-IMT) values and periodontal and peri-implant diseases in a sample of patients with hypertension.A total of 151 participants with presence of at least one dental implant in function for 5 years were recruited. Anthropometric measurements, 24-h ambulatory blood pressure monitoring, ultrasound assessment of carotid arteries (c-IMT and presence of plaque) were recorded and venous blood samples obtained. An oral examination was performed by calibrated examiners to ascertain prevalence and severity of periodontal and peri-implant diseases. Binomial logistic regression was performed to investigate the potential association between various measures of exposure of dental diseases and predictors of cardiovascular risk (c-IMT 0.9 mm and presence of plaque or their combination).Diagnosis of periodontitis (OR 6.71, 95% CI: 2.68-16.76, P 0.001), cumulative mucosal/gingival inflammation (Periodontal Screening and Recording score) (OR 1.25, 95% CI:1.12-1.41, P 0.001), and mucositis (OR 3.34, 95% CI:1.13-9.85, P 0.05) were associated with c-IMT 0.9 mm and/or plaque presence independent of age, sex, smoking, 24 h systolic blood pressure and body mass index differences. No statistically significant results were noted for peri-implantitis. Linear regression models confirmed a positive association of cumulative mucosal/gingival inflammation (β = 0.011, SE 0.002, P 0.001), diagnosis of periodontitis (β = 0.114, SE 0.020, P 0.001), and peri-implant diseases (β = 0.011, SE 0.002, P 0.001) with increased c-IMT values.This study confirms a positive association between mucosal/gingival inflammation and subclinical atherosclerosis assessed by c-IMT values and the presence of carotid plaque in patients with hypertension, independent of traditional cardiovascular risk factors. Future studies are needed to further characterize this relationship.

Objective The relationships between oral health habits, dietary practices, and oral health status, as well as general health status, in the population of Italian women, are complex, with many mutual and interrelating factors. The purpose of this study is to investigate oral habits, oral status, and dietary habits of a sample of women in Italy, highlighting the links between nutrition and oral health and discussing how oral health care professionals can integrate nutrition counseling that aimed at improving the oral health of their patients into their practices. Materials and Methods In the period between February 2020 and July 2020, an anonymous questionnaire made up of 20 questions was administered to a randomized sample of 120 Italian women. Results Most of women declare good manual skills in oral hygiene (50%) but just less than half of them brushes their teeth more than three times a day. Statistically significant correlations were found between frequency of dental checkups and dental mobility (p = 0.036), and halitosis (p = 0.006), as well as between frequency of flossing and gum bleeding. Correlation between the type of diet and oral health status showed more halitosis (∼21%), sensitivity (∼26%), and xerostomia (∼53.3%) for vegetarian and vegan women. Conclusion More awareness need to be raised concerning oral hygiene habits, and regarding the importance of regular dental checkups. Brushing at least twice or three times a day needs to be encouraged and the valid support of dental aids has to be in the everyday domestic oral hygiene protocol, as scientific evidence demonstrates. Future clinical studies need to be performed on a more consistent number of vegetarian and vegan patients, to obtain more statistically significant results and support future research that will compare omnivorous, vegetarian, and vegan diets and their influence on oral health status.

Background: Removable partial dentures are a frequently used prosthetic treatment in the elderly population, but different types or RPDs might guarantee different chewing capabilities. In many studies, the relationship between chewing and aging has been reported and it has been shown that efficient chewing can improve the overall quality of life. Objectives: In the present study, the relationship between maximum bite force (MBF) and RPDs was studied. A relationship between the body mass index (BMI) and the type of prosthesis was also analyzed. Methods: 240 elderly patients, 120 males and 120 females, with bilateral posterior edentulism (class 1 of Kennedy classification) who had been wearing an RPD for at least a year, were recruited. Patients were divided into two groups: Group 1: male (n = 60) and female (n = 60) patients with bilateral edentulous areas located posterior to the remaining natural teeth and natural teeth in the opposite dental arch. Group 2: male (n = 60) and female (n = 60) patients with maxillary and mandibular bilateral edentulous areas located posterior to the remaining natural teeth. Their Body Mass Index (BMI) and Maximum bite force (MBF) were measured and compared according to the material and design of their RPD. Results: In both Groups, patients wearing cobalt-chrome alloy RPDs (Co-Cr-RPD) (Group 1: 20.25 ± 6.7 MBF, p &lt, 0.001, Group 2: 16.0 ± 5.7 MBF, p &lt, 0.001) had an increased MBF when compared to polymethylmethacrylate RPD (PMMA-RPD) (Group 1: 12.9 ± 3.36 MBF, Group 2: 10.4 + 2.8 MBF), and Valplast RPD (V-RPD) (Group 1: 14.3 ± 4.7 MBF, Group 2: 11.3 ± 3.4 MBF) users. There were no significant differences in bite force between patients wearing PMMA-RPD and V- RPD in both Groups. Patients in Group 2 showed a lower MBF than those in Group 1 (Group 1: 16.05 ± 6.13 MBF, Group 2: 12.6 ± 4.84 MBF, p &lt, 0.001). Conclusions: A reduction in chewing force can lead to choosing softer foods for nutrition, which can lead to an increase in BMI. Our results show that only CoCr-RPD wearers were able to chew consistent food, whereas PMMA- RPD and V-RPD, due to the properties of the materials, their instability, and the possibility of causing pain during mastication, determined a limitation in the choice of food for many of the participants.

Purpose To compare the trueness and precision of 3D-printed versus milled monolithic zirconia crowns (MZCs). Methods A model of a maxilla with a prepared premolar was scanned with an industrial scanner (ATOSQ®, Gom) and an MZC was designed in computer-assisted-design (CAD) software (DentalCad®, Exocad). From that standard tessellation language (STL) file, 10 MZCs (test) were 3D-printed with a Lithography-based Ceramic Manufacturing (LCM) printer (CerafabS65®, Lithoz) and 10 MZCs (control) were milled using a 5-axis machine (DWX-52D®, DGShape). All MZCs were sintered and scanned with the aforementioned scanner. The surface data of each sample (overall crown, marginal area, occlusal surface) were superimposed to the original CAD file (ControlX®, Geomagic) to evaluate trueness: (90-10)/2, absolute average (ABS AVG) and root mean square (RMS) values were obtained for test and control groups (MathLab®, Mathworks) and used for analysis. Finally, the clinical precision (marginal adaptation, interproximal contacts) of test and control MZCs was investigated on a split-cast model printed (Solflex350®, Voco) from the CAD project, and compared. Results The milled MZCs had a significantly higher trueness than the 3D-printed ones, overall [(90-10)/2 printed 37.8 µm vs milled 21.2 µm; ABS AVG printed 27.2 µm vs milled 15.1 µm; RMS printed 33.2 µm vs milled 20.5 µm; p = 0.000005], at the margins [(90-10)/2 printed 25.6 µm vs milled 12.4 µm; ABS AVG printed 17.8 µm vs milled 9.4 µm; RMS printed 22.8 µm vs milled 15.6 µm; p= 0.000011] and at the occlusal level [(90-10)/2 printed 50.4 µm vs milled 21.9 µm; ABS AVG printed 29.6 µm vs milled 14.7 µm; RMS printed 38.9 µm vs milled 22.5 µm; p = 0.000005]. However, with regard to precision, both test and control groups scored highly, with no significant difference either in the quality of interproximal contact points (p = 0.355) or marginal closure (p = 0.355). Conclusions Milled MZCs had a statistically higher trueness than 3D-printed ones; all crowns, however, showed high precision, compatible with the clinical use. Clinical significance Although milled MZCs remain more accurate than 3D-printed ones, the LCM technique seems able to guarantee the production of clinically precise zirconia crowns.

The aim of this human cadaver study was to assess the accuracy of zygomatic/pterygoid implant placement using custom-made bone-supported laser sintered titanium templates. For this purpose, pre-surgical planning was done on computed tomography scans of each cadaver. Surgical guides were printed using direct metal laser sintering technology. Four zygomatic and two pterygoid implants were inserted in each case using the guided protocol and related tools. Post-operative computed tomography (CT) scans were obtained to evaluate deviations between the planned and inserted implants. Accuracy was measured by overlaying the real position in the post-operative CT on the virtual presurgical placement of the implant in a CT image. Descriptive and bivariate analyses of the data were performed. As a result, a total of 40 zygomatic and 20 pterygoid implants were inserted in 10 cadavers. The mean deviations between the planned and the placed zygomatic and pterygoid implants were respectively (mean ± SD): 1.69° ± 1.12° and 4.15° ± 3.53° for angular deviation. Linear distance deviations: 0.93 mm ± 1.23 mm and 1.35 mm ± 1.45 mm at platform depth, 1.35 mm ± 0.78 mm and 1.81 mm ± 1.47 mm at apical plane, 1.07 mm ± 1.47 mm and 1.22 mm ± 1.44 mm for apical depth. In conclusion, the surgical guide system showed accuracy for all the variables studied and allowed acceptable and accurate implant placement regardless of the case complexity.

Medication-related osteonecrosis of the jaw (MRONJ) is an adverse event associated with antiresorptive and antiangiogenic drugs. The use of these drugs in the treatment of cancer patients with bone metastasis is necessary and standardized in the literature. A multidisciplinary approach for the patient’s management is strongly recommended. Therefore, it should be necessary to integrate the path of these subjects with a dedicated dental screening in order to first assess the individual risk of developing a MRONJ, and then to plan dental treatments and oral hygiene sessions, and finally to schedule a follow-up to intercept and treat early osteonecrosis. The aim of this manuscript is to propose a new simple medical report to evaluate patients affected by metastatic bone cancer in order to reduce the risk of developing MRONJ.

Subcutaneous facial emphysema related to dental treatments is a well-known clinical complication due to incidental or iatrogenic air or gas penetration into the subcutaneous tissues and fascial planes, leading to distension of the overlying skin. To the best of our knowledge, from 1960 to the current date, only six cases have been reported arising from peri-implant cleaning or non-surgical peri-implantitis treatment. Therefore, the present case of subcutaneous facial emphysema following open-flap air-powder abrasive debridement was the first report during surgical peri-implantitis therapy. Swelling on the left cheek and periorbital space suddenly arose in a 65-year-old woman during open-flap debridement with sodium bicarbonate air-powder abrasion (PROPHYflex™ 3 with periotip, KaVo, Biberach, Germany) of the infected implant surface. The etiology, clinical manifestations, diagnosis, potential complications, and management of subcutaneous emphysema are also briefly reviewed. The present case report draws the attention of dental practitioners, periodontists, oral surgeons, and dental hygienists to the potential iatrogenic risk of subcutaneous emphysema in using air-powder devices in implant surface debridement.

Objectives: The use of digital devices is strongly influencing the dental rehabilitation workflow both for single-crown rehabilitation and for full-arch prosthetic treatments. Methods: In this study, trueness was analyzed by overlapping the scan dataset made with Medit I-500 (by using two different tips and two different scan strategies) with the scan dataset made with lab scanning, and the values of the (90°–10°)/2 method were reported. Precision was evaluated by using the same values of trueness coming from the intra-group overlapping (scan dataset made with an IOS overlapped and compared to each other). Moreover, two different software programs of overlapping were used to calculate accuracy values. Results: The mean difference of trueness was 26.61 ± 5.07 µm with the suggested strategy of intraoral scanning and using a new design of the tip, 37.99 ± 4.94 µm with the suggested strategy of intraoral scanning and using the old design of the tip, and 51.22 ± 6.57 µm with a new strategy of intraoral scanning and using the old design of the tip. The mean difference of precision was 23.57 ± 5.77 µm with the suggested strategy of intraoral scanning and using a new design of the tip, 38.34 ± 11.39 µm with the suggested strategy of intraoral scanning and using the old design of the tip, and 46.93 ± 7.15 µm with a new strategy of intraoral scanning and using the old design of the tip. No difference was found in the trueness and precision data extracted using the two different programs of superimposition Geomagic Control X and Medit Compare. Conclusions: The outcomes of this study showed that the latest version of I-Medit 500 with the use of a new tip seems to be promising in terms of accuracy when a full arch needs to be scanned. Moreover, Medit Compare, which is an application of Medit IOS software, can be used to calculate IOS accuracy.

Severely atrophic alveolar ridges represent a great challenge for implant-prosthetic rehabilitations. The aim of this study was to clinically and histologically evaluate horizontal and vertical bone gain, as well as implant survival/success rate after guided bone regeneration (GBR) for the reconstruction of large bone defects. Fourteen subjects (7 males and 7 females; mean age: 48.9 ± 14.1) were enrolled in the study. They were selected according to specific inclusion criteria and all patients required GBR procedures for placing implants in severe atrophic jaws (bone height ≤6 mm). Guided bone regeneration was performed using dense polytetrafluoroethylene nonresorbable titanium-reinforced membranes associated with particulate heterologous bone grafts. Implant placement was performed 6 months after surgery at the same time as the removal of the membrane. Furthermore, a biopsy sample from the grafted sites was collected to conduct a histological analysis of the regenerated bone. Forty-seven dental implants were placed and followed up after prosthetic loading. Seventeen sites, 8 in the maxilla and 9 in the mandible, were suitable for the GBR procedure. The healing period was uneventful in 13 sites. The average value of vertical bone regeneration was 5.88 ± 1.17 mm. Postloading follow-up ranged from 24 to 59 months. During the follow-up, clinical and radiographic exams showed no significant bone resorption and, in each case, the criteria for implants' survival were respected with no signs of any complications. Histological analysis of the bone biopsy samples revealed residual graft particulate in close contact with newly formed bone. Guided bone regeneration is a reliable technique for reconstruction of severe atrophic ridges. Larger long-term follow-up studies are needed to evaluate the condition of the bone grafted over time and its ability to support functional loading of the implants.

Background: Retrograde peri-implantitis (RPI) is a pathological entity with an unclear etiology (e.g., overheating during implant insertion, residual infection of the tooth replaced by the implant or the endodontic lesion of neighboring teeth) and an extremely low prevalence and has been scarcely investigated. Therefore, the aim of this cross-sectional survey was to evaluate the knowledge and attitude of Italian implantologists regarding RPI. Methods: An anonymous questionnaire was sent via email to implantologists randomly selected, including a section about demographic information and questions related to RPI origin, radiographic representation, symptoms and treatment options. All questions were multiple answer and close-ended. Binomial logistic regression was performed to investigate the relationship between correct answers and the following independent variables: age, years of experience and number of dental implants placed per year. Results: In total, 475 implantologists completed the questionnaire, with a response rate of 46.3%. Based on the results of the study, incorrect answers were associated with less experienced participants (&lt, 80 implants/year) for all questions evaluated, with the exception of treatment strategies. Furthermore, 26.7% of the survey takers did not recognize radiographic representation of RPI and 35.5% picked &ldquo, implant removal&rdquo, when asked about treatment modality. Conclusions: The majority of participants were able to recognize symptoms and indicated the probable causes of RPI, however, around 30% of them showed very limited knowledge of available management strategies.

Pterygoid implant placement has not been a common treatment modality to manage the atrophic posterior maxilla. This randomized, controlled clinical trial evaluated the accuracy of dynamic navigation using trace registration (TR) technology in pterygoid implant placement when compared to free-hand surgery. Partially edentulous patients requiring at least one pterygoid implant to rehabilitate the atrophic posterior maxilla were included. Implant accuracy (in a prosthetically directed context) and the relation of the placed implants to the greater palatine canal (GPC) were evaluated using EvaluNav to compare the preoperative CBCT plan with the postoperative CBCT implant location. Osseointegration success, mucosal thickness, implant length, time spent for surgical placement, and ease of prosthetic restorability via degree of multi-unit abutment angulation were assessed. A total of 63 pterygoid implants were placed (31 using TR, 32 using free-hand) in 39 partially edentulous patients. Mean deviations between the planned and actual position for TR-placed implants were 0.66 mm at the coronal level, 1.13 mm at the apical level, 0.67 mm in depth, and 2.64 degrees of angular deviation, compared to 1.54 mm, 2.73 mm, 1.17 mm, and 12.49 degrees, respectively, for free-hand implants. In relation to the GPC, TR implants were more accurate when compared to the presurgical plan and took less surgical time. The mean mucosal thickness measured for all implants was 5.41 mm. Most implants were 15 to 18 mm long, and most prostheses (92%) could be accommodated by a 17- or 30-degree multi-unit screw-retained abutment. TR implants had greater short-term osseointegration success rates than free-hand implants (100% vs 93.75%). Pterygoid implant surgery can be a predictable and successful modality for prosthetically directed implant rehabilitation in the atrophic posterior maxilla, is more accurate than free-hand surgery, and takes less time when using dynamic navigation via TR.

Purpose This systematic review was performed to compare tooth, implant and prosthesis failures and biological and technical complications in toothimplant vs freestanding implant supported fixed partial prostheses, in order to evaluate the effectiveness and predictability in combining teeth and implants in the same fixed partial prosthesis. Study selection A comprehensive and systematic literature research was conducted, according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement, to identify human trials, with a minimum sample size of 10 patients, comparing tooth-implant to freestanding implant supported fixed partial prostheses. Four groups of meta-analyses were performed based on the patients treated with toothimplant vs freestanding implant-supported fixed partial prostheses: abutment failures, biological and mechanical complications, prosthesis failures, and prosthetic (technical) complications. Results The search yielded 749 records, after removal of duplicates. Based on the title assessment, the abstracts reading and the full-texts evaluation, 8 articles, published between 1999 and 2013, fulfilled the inclusion criteria and were included in the meta-analysis. The studies included were: 4 controlled clinical trials, 2 prospective and 2 retrospective cohort studies. The meta-analysis revealed no significant difference between tooth-implant and implant-implant supported fixed in the number of abutment (implant or tooth) failures, biological complications, prosthesis lost, and prosthetic complications. Conclusions Within the limitations of the present systematic review, although the freestanding implant supported fixed partial prosthesis remains the first choice, joining teeth and implants to support fixed prosthesis in partially edentulous patients becomes a valid alternative with an acceptable success rate.

A minimally invasive implant treatment approach for future full arch implant prosthetic rehabilitations of trophic jaws represents a challenge. An optimal implant planning is strongly related with an accurate merge of the prosthetic information and the radiographic data. To comply with that, most computer aided implantology (CAI) systems require additional steps, as radiographic stents or fiducial markers to overlap digital jaw scans to cone beam computed tomography (CBCT) data. Using dynamic CAI, residual teeth (up to three) make it possible for the merge to avoid new radiographic scans. An additional challenge is the treatment involving immediate implants compared with delayed implants placed into healed bone. As for other static CAI systems, the operator&rsquo, s experience and the quality of the CBCT data make the planning affordable and secure the entire implants placement procedure. The literature reports accuracies in terms of comparison between placed implants and planned implants, following a double CBCT approach, based on radiographic volume overlapping. Thirteen consecutive future totally edentulous patients (77 implants), divided into two groups (group A: 3&ndash, 4 teeth traced, group B: 5&ndash, 6 teeth traced) requiring a full arch implant prosthetic rehabilitation were included in the reported case series. A dynamic CAI was used to plan and to place all implants following all the recommended digital steps. The software used provided a tool (Trace and Place) that made the merge between X-ray views of the residual teeth and their own positions possible. This method definitely registered that teeth positions comply with the required accuracy live check. After implants placement, a post-operative CBCT was taken in order to evaluate the deviations of the achieved implants at coronal, apical, and depth level as well as angular deviations. Statistically significant radiological mean difference between the two groups was found in the coronal position of implants (0.26 mm, p &lt, 0.001), in the apical position of implants (0.29 mm, p &lt, 0.001), in the depth of implants (0.16 mm, p = 0.022), and in the angular deviation (0.7, p = 0.004). The use of the TaP technology for the treatment of the patients with at least three stable teeth that need to be removed for a totally implant prosthetic treatment is a promising technique. The performed accuracy analysis demonstrated that this digital protocol can be used without a loss of accuracy of the achieved implants compared to planned ones.

Background: Recent articles have hypothesized a possible correlation between dental implants dissolution products and peri-implantitis. The null hypothesis tested in this case-control study was that there would be no differences in salivary concentrations of titanium (Ti), vanadium (V), nickel (Ni) and arsenic (As) ions among patients with dental implants, healthy (Group A) or affected by peri-implantitis (Group B), compared to subjects without implants and/or metallic prosthetic restorations (Group C). Methods: Inductively coupled plasma mass spectrometry was used to analyze saliva samples. One-way repeated-measure analysis of variance (ANOVA) was used to identify statistically significant differences in the salivary level of Ti, V, Ni and As between the three groups. Results: A total of 100 patients were enrolled in the study (42 males and 58 females), distributed in three groups: 50 patients in Group C, 26 patients in Group B and 24 patients Group B. In our study, concentrations of metallic ions were higher in Group A and B, compared to the control group, with the exception of vanadium. However, there were no statistically significant differences (p &gt, 0.05) for metallic ions concentrations between Group A and Group B. Conclusions: Based on our results, there are no differences in titanium or other metals concentrations in saliva of patients with healthy or diseased implants.

The present short communication described a new procedure for the reconstruction of the horizontal severely resorbed edentulous maxilla with custom-made deproteinized bovine bone block, fabricated using three-dimensional imaging of the patient and computer-aided design/computer-aided manufacturing (CAD/CAM) technology. The protocol consisted of three phases. In the diagnosis and treatment planning, cone-beam computed tomographic scans of the patient were saved in DICOM (digital imaging and communication in medicine) format, anatomic and prosthetic data were imported into a dedicated diagnostic and medical imaging software, the prosthetic-driven position of the implants, and the graft blocks perfectly adapted to the residual bone structure were virtually planned. In the manufacturing of customized graft blocks, the CAD-CAM technology and the bovine-derived xenohybrid composite bone (SmartBone® on Demand - IBI SA - Industrie Biomediche Insubri SA Switzerland) were used to fabricate the grafts in the exact shape of the 3D planning virtual model. In the surgical and prosthetic procedure, the maxillary ridge augmentation with custom-made blocks and implant-supported full-arch screw-retained rehabilitation were performed. The described protocol offered some advantages when compared to conventional augmentation techniques. The use of deproteinized bovine bone did not require additional surgery for bone harvesting, avoided the risk of donor site morbidity, and provided unlimited biomaterial availability. The customization of the graft blocks reduced the surgical invasiveness, shorting operating times because the manual shaping of the blocks and its adaptation at recipient sites are not necessary and less dependent on the clinician’s skill and experience.

Background/aim Intensity modulated radiotherapy (IMRT) has been compared with three-dimensional conformal radiotherapy (3D-CRT) in randomized clinical trials for head and neck squamous cell carcinoma (HNSCC). The aim of this meta-analysis was to evaluate the efficacy and toxicity of IMRT and 3D-CRT and identify differences in grade ≥2 xerostomia incidence and clinical outcomes. Materials and methods The preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement was applied. Random-effects models were used. Primary endpoint was xerostomia of grade 2 or worse. Secondary endpoints were overall survival (OS) and loco-regional control (LRC). Results Three randomized clinical trials representing 213 patients were identified. Global, grade ≥2 acute xerostomia and late xerostomia at 1 and 2 years after treatment were reduced with the IMRT technique (RR=0.71, 95%CI=0.59-0.86, RR=0.45, 95%CI=0.31-0.65 and RR=0.26, 95%CI=0.15-0.46, respectively). IMRT was not associated with significant OS and LRC improvement compared with 3D-CRT, with OR of 0.70 (95%CI=0.39-1.24; p=0.22) and 1.50 (95%CI=0.75-2.98; p=0.25). Conclusion This meta-analysis explored the value of IMRT compared to 3D-CRT and confirmed the superiority of IMRT over 3D-CRT in terms of grade ≥2 xerostomia rates, but not on clinical outcomes. Its positive impact on tumor control and survival remains to be proven.

Dental implants are one of the most commonly used ways to replace missing teeth. Nevertheless, the close contact with hard and soft oral tissues expose these devices to infectious peri-implant diseases. To prevent such infection, several surface treatments have been developed in the last few years to improve the antimicrobial properties of titanium dental implants. In this in-vitro pilot study, the antimicrobial activity of titanium surfaces coated with different types of graphene nanoplatelets are investigated. Six different colloidal suspensions of graphene nanoplatelets (GNPs) were produced from graphite intercalated compounds, setting the temperature and duration of the thermal shock and varying the number of the exfoliation cycles. Titanium disks with sand-blasted and acid-etched surfaces were sprayed with 2 mL of colloidal GNPs suspensions. The size of the GNPs and the percentage of titanium disk surfaces coated by GNPs were evaluated through a field emission-scanning electron microscope. The antibacterial activity of the specimens against Staphylococcus aureus was estimated using a crystal violet assay. The dimension of GNPs decreased progressively after each sonication cycle. The two best mean percentages of titanium disk surfaces coated by GNPs were GNPs1050&deg, /2 and GNPs1150&deg, /2. The reduction of biofilm development was 14.4% in GNPs1150&deg, /2, 20.1% in GNPs1150&deg, /3, 30.3% in GNPs1050&deg, /3, and 39.2% in GNPs1050&deg, /2. The results of the study suggested that the surface treatment of titanium disks with GNPs represents a promising solution to improve the antibacterial activity of titanium implants.

Efficacy and rapid onset of postsurgical oral pain relief are critical to improve clinical outcomes and reduce the risk of excessive dosing with analgesic drugs.To compare analgesic effects of preoperative administration of paracetamol 500 mg plus codeine 30 mg in single-tablet and effervescent formulation to ibuprofen 400 mg, and placebo in the management of moderate to severe postoperative pain after mandibular third molar surgery.One hundred twenty healthy outpatients aged 15-29 years undergoing surgical removal of 1 bony impacted mandibular third molar were enrolled in this, single-center, prospective, randomized, triple-blind parallel-group, placebo-controlled, clinical trial. Study participants were randomly assigned to three treatment arms. According to the concealed allocation, each patient 30 minutes before surgery received paracetamol 500 mg plus codeine 30 mg (group APAP/COD), ibuprofen 400 mg (group IBU) or placebo (group PLA). Rescue therapy allowed in the postoperative period was paracetamol 500 mg plus codeine 30 mg in groups APAP/COD and PLA and ibuprofen 400 mg in group IBU. Patients recorded on Numerical Rating Scale-11 (NRS-11) the pain intensity, total number of postoperative-supplement medications and time of the first intake, until 12-hours after surgery and over extra 2 days, RESULTS: Over postoperative 3 days, patients in the APAP/COD group (2.33 ± 1.99) displayed significantly (P.001) less pain intensity than IBU (3.43 ± 2.47) and placebo (3.57 ± 2.62) groups. The first-day postoperative pain was significantly (P.001) higher in group PLA than in groups APAP/COD and IBU, but not between the latter 2 groups. However, at 2 hours postdose, the IBU group displayed average pain intensity lower than APAP/COD group (P.05). On the next 2 days, pain intensity was significantly (P.001) lower in group APAP/COD than in groups IBU and PLA but failed to reach statistical significance between groups IBU and PLA. Although the time to the first using rescue therapy was longer (445.88 ± 159.96 minute) in group IBU, compared to groups APAP/COD (392.67 ± 138.90 minutes) and PLA (323.00 ± 143.95 minutes), the number of supplemented tablets was significantly higher in group IBU (2.89 ± 2.13) than in groups APAP/COD (1.24 ± 1.79) (P= .001) and PLA (1.53 ± 1.67) (P = .008). No adverse events were registered for all groups.Within the limits of the present study, over postoperative 3 days, a statistically significant intensity pain reduction and decreased rescue therapy consumption were recorded in the paracetamol-codeine group than to ibuprofen group. Nevertheless, lower pain intensity at 2 hours postdose and longer time using rescue therapy was found in the ibuprofen group without statistical significance. No adverse events occurred over the studied period.

Objectives To compare, using an ex vivo model, the biofilm removal of three surface decontamination methods following surgical exposure of implants failed for severe peri-implantitis. Materials and methods The study design was a single-blind, randomized, controlled, ex vivo investigation with intra-subject control. Study participants were 20 consecutive patients with at least 4 hopeless implants, in function for >12 months and with progressive bone loss exceeding 50%, which had to be explanted. Implants of each patient were randomly assigned to the untreated control group or one of the three decontamination procedures: mechanical debridement with air-powder abrasion, chemical decontamination with hydrogen peroxide and chlorhexidine gluconate, or combined mechanical-chemical decontamination. Following surgical exposure, implants selected as control were retrieved, and afterwards, test implants were decontaminated according to allocation and carefully explanted with a removal kit. Microbiological analysis was expressed in colony-forming-units (CFU/ml). Results A statistically significant difference (p < 0.001) in the concentrations of CFU/ml was found between implants treated with mechanical debridement (531.58 ± 372.07) or combined mechanical-chemical decontamination (954.05 ± 2219.31) and implants untreated (37,800.00 ± 46,837.05) or treated with chemical decontamination alone (29,650.00 ± 42,596.20). No statistically significant difference (p = 1.000) was found between mechanical debridement used alone or supplemented with chemical decontamination. Microbiological analyses identified 21 microbial species, without significant differences between control and treatment groups. Conclusions Bacterial biofilm removal from infected implant surfaces was significantly superior for mechanical debridement than chemical decontamination. Clinical relevance The present is the only ex vivo study based on decontamination methods for removing actual and mature biofilm from infected implant surfaces in patients with peri-implantitis.

Background The insertion of dental implants in the atrophic posterior maxilla can be a challenge. One option is to modify the residual native bone in preparation for proper, prosthetically-driven implant placement. The procedure presented in this study is called Navigated Antral Bone Expansion (N.A.B.E). This procedure employs the use of a navigation system to plan and guide the initial pilot drilling, bone expansion, final site preparation, and implant insertion. The aim of this study was to compare the distance between the alveolar ridge and the sinus floor measured before and after the surgery performed using the N.A.B.E. technique. Methods Thirty-seven partially edentulous patients who were candidates for implant supported restoration in the posterior maxilla, with a bone height ranging from 4 to 7 mm were enrolled. The N.A.B.E procedure was used to increase the bone height. Paired-samples t-test evaluated the distance between the alveolar ridge and the sinus floor measured before and after surgery. The occurrence of post-surgical complications, and the angular deviation between the planned osteotomy and the actual placed implant trajectories were evaluated. Results Out of the 37 consecutive patients enrolled in the study, 35 were considered in the data analyses. Patients’ bone height after surgery compared to the bone height before surgery showed a statistically significant increase (p 0 to 34.900 (mean 25.170 ± 5.100). Conclusions This study provides evidence that N.A.B.E. technique is able to provide a significant bone increase, and could be considered an alternative method to the management of the atrophic posterior maxilla with a minimally invasive approach.

Purpose. To report the supracrestal bone regeneration of approximately 10 mm using solvent-dehydrated mineralized cancellous bone allograft and nonresorbable membrane in rehabilitation of unsuccessful implants in the anterior maxilla and stability of the regenerated bone at the 14th-year follow-up. Case Presentation. A 24-year-old female patient with a history of anterior dentoalveolar trauma resulting in the loss of upper left incisors and canine underwent rehabilitation several years ago with three implant-supported fixed prostheses. The prosthesis was both functionally and aesthetically inadequate, and the patient complained of gingival swelling, bleeding, and food impaction at the site of the implants. A staged approach for retreatment was planned, wherein the first surgical stage aimed at removing the existing implants and preparing the bone ridge and soft tissues for the augmentation procedure. The second stage was vertical ridge augmentation and simultaneous prosthetic-driven placement of two new implants at the sites of the left central incisor and canine. After nine months of uneventful healing, complete regeneration of the bony defect was achieved, and the new prosthetic rehabilitation satisfied both functional and aesthetic requirements. Conclusion. The therapeutic approach followed in the present case proved effective in achieving satisfactory functional and aesthetic results and in maintaining the stability of the regenerated bone at 14 years of follow-up.

To determine the survival trend of dental implants after functional loading for ≥1 year in diabetic patients.An electronic search of the Cochrane Oral Health Group's Trials Register, Medline and Embase, plus a manual search up to December 2015 was performed. Studies assessing the survival rate of dental implants in patients with a diagnosis of diabetes mellitus were considered eligible. Screening of studies, quality assessment, and data extraction were conducted independently by 2 reviewers. Life-table analysis and Kaplan-Meier survival curves were used to evaluate implant survival and to plot the cumulative survival rate and cumulative hazard ratio.Seven studies, including 1142 implants were identified. The cumulative survival rate was 0.96 ± 0.10 before loading, 0.93 ± 0.10 and 0.91 ± 0.10 at 1 year, and at the end of the follow-up period, respectively. The hazard ratio was 4% during the period of osseointegration, 3% during the first year of loading, and remained constant over the 6-year follow-up.Patients with diabetes mellitus showed an increasing trend of implant failure during the period of osseointegration and the first year of loading.

Background The aim of this survey was to evaluate the knowledge and awareness of parents about potential oral health risk factors and correct management of oral hygiene of their preschool children. Material and Methods The participation to the survey was proposed to all parents of 3-5 year aged children attending a kindergarten in Campobasso. A self-administered questionnaire was completed to obtain information regarding demographic and education variables, knowledge about caries and its transmission, infant feeding practice, maternal oral health during pregnancy, parents and children's oral hygiene habits and risk behaviors (e.g., sharing cutlery, tasting of baby food, nightly using of baby bottles or pacifier), oral health prevention and role of school. Results Overall, the parents of 101 children consented to fill the questionnaire. Data analysis showed that only 24% of respondents was aware of the potential vertical transmissibility of cariogenic bacteria through contaminated saliva. It is still a common trend from 61% of parents tasting food of their child. On 101 children, 30% used pacifier and 17% used baby bottle with milk during night and among these children 41% for more than 2 years. Parents reported no toothbrushing for 57% of the children in their first 3 years of life. Conclusions From this survey, independently on parents education, it emerges as still nowadays parents are not fully trained and informed about the management of their child's oral hygiene and as it's necessary a parental oral health promoting program to control children oral health risk status, starting from school. Key words:Oral health, pre-school children, dental caries, oral prevention.

Introduction The aim of this work was to analyze data of patients with failed or delayed eruption of first and second permanent molars, to assess the effectiveness of the treatment methods used. Methods Epidemiologic and clinical data of 125 patients (mean age 14.08 ± 4.04 years) with 197 affected molars (30 first and 167 second molars) were retrospectively analyzed. The treatment outcome was known in 161 molars after patient drop-out (20 patients with 36 molars). The cases were categorized into 8 groups according to the choice of treatment: orthodontic uprighting, surgical-orthodontic uprighting, surgical uprighting, surgical repositioning, surgical exposure, first or second molar extraction, third molar extraction, or removal of pathologic conditions. Results The overall treatment outcome was positive in 141 molars (87.6%). It was positive in all cases treated with orthodontic uprighting (7 molars), surgical exposure (10 molars), surgical uprighting (38 molars), and surgical repositioning (8 molars), but it was significantly lower for surgical-orthodontic uprighting (34/48 molars, 70.8%). The positive outcome was significantly lower for inclusion (52/68 molars, 76.5%) than for early-diagnosed condition (11/11 molars, 100%) and retention (78/82 molars, 95.1%), and for total bone crown coverage (21/28 molars, 75.0%) than for osteomucosal or mucosal crown coverage (120/133 molars, 90.2%). Conclusions This study demonstrates that an early diagnosis results in a better outcome regardless of the treatment used, with the number of cases with a positive outcome being higher in younger patients.