Search

Genetically improved forest reproductive materials are now widely accessible in many European countries due to decades of continuous breeding efforts. Tree breeding does not only contribute to higher-value end products but allows an increase in the rate of carbon capture and sequestration, helping to mitigate the effects of climate change. The usefulness of breeding programmes depends on (i) the relevance of the set of selected traits and their relative weights (growth, drought tolerance, phenology, etc.); (ii) the explicit management of targeted and “neutral” diversity; (iii) the genetic gain achieved; and (iv) the efficiency of transferring diversity and gain to the plantation. Several biological factors limit both operational breeding and mass reproduction. To fully realise the potential of tree breeding, the introduction of new technologies and concepts is pivotal for overcoming these constraints. We reviewed several European breeding programmes, examining their current status and factors that are likely to influence tree breeding in the coming decades. The synthesis was based on case studies developed for the European Union-funded B4EST project, which focused on eight economically important tree species with breeding histories and intensities ranging from low-input breeding (stone pine, Douglas-fir and ash) to more complex programmes (eucalyptus, maritime pine, Norway spruce, poplar, and Scots pine). Tree breeding for these species is managed in a variety of ways due to differences in species’ biology, breeding objectives, and economic value. Most programmes are managed by governmental institutes with full or partial public support because of the relatively late return on investment. Eucalyptus is the only tree species whose breeding is entirely sponsored and managed by a private company. Several new technologies have emerged for both phenotyping and genotyping. They have the potential to speed up breeding processes and make genetic evaluations more accurate, thereby reducing costs and increasing genetic gains per unit of time. In addition, genotyping has allowed the explicit control of genetic diversity in selected populations with great precision. The continuing advances in tree genomics are expected to revolutionise tree breeding by moving it towards genomic-based selection, a perspective that requires new types of skills that are not always available in the institutions hosting the programmes. We therefore recognise the importance of promoting coordination and collaboration between the many groups involved in breeding. Climate change is expected to bring in new pests and diseases and increase the frequency of extreme weather events such as late frosts and prolonged droughts. Such stresses will cause slow growth and mortality, reducing forest productivity and resilience. Most of these threats are difficult to predict, and the time-consuming nature of conventional breeding does not allow for an adequate and timely reaction. We anticipate that most breeding programmes will need to revise their selection criteria and objectives to place greater emphasis on adaptive performance, tolerance to multiple environmental stresses, stability in different environments, and conservation of genetic diversity. Testing breeding materials in a variety of environments, including potentially contrasting climates, will become increasingly important. Climate change may also force the incorporation of new genetic resources that provide new useful adaptations, which may involve the use of new, previously unexplored gene pools or hybridisation, with the enormous challenge of incorporating useful alleles without adding along an unfavourable genetic background. Decision-support tools to help landowners and foresters select the best-performing forest reproductive material in each specific environment could also help reduce the impact of climate change.

Renewable bioenergy has the potential to contribute sustainably to the energy sector. Forestry is the main source of biomass for energy in Europe, and poplar (genus Populus) is widely used for short rotation coppice (SRC). Many studies have assessed poplar clones’ productivity but there is a lack of regional studies and links with the climate. We investigated the biomass productivity of twenty hybrid poplar clones for SRC. Clones were planted in sixteen locations across nine countries in Europe, although not all clones were replicated in all locations. In each location, clones were planted in three replicated plots. All plots were harvested after four years, and the aboveground dry biomass estimated. We fitted clone-specific linear mixed models of total aboveground dry biomass production at plot level as function of climatic variables. For many clones (eight) only annual heat moisture deficit negatively affected productivity, in few cases (3) together with a quadratic term for a smoother relationship. In some other clones (five) only the mean summer precipitation positively and linearly affected productivity. On average, the variance explained by the fixed effects in those models was 56%. For the remaining clones (seven), no climate variables resulted significant. Our study explicitly investigated the quantitative link between water availability and poplar SRC productivity, one of the most important known factors but not often studied with a modelling approach. Further, we show the most productive clones in dried conditions. We also highlight the need to larger scale regional experiments to produce models that can be used in climate change scenarios.

The cultivation of hybrid poplar clones is increasing worldwide. Hundreds of hectares of plantations now occur across Europe and other continents such as North America, using tested clones and novel genotypes. Research effort aims are to develop fast growing disease- and pest-resistant clones to improve production quality and quantity. In this study the phenotypic plasticity of poplar clones was tested across environmental and temporal gradients. The growth performance of 49 hybrid poplar clones recorded between 1980 and 2021 was analysed using a mixed-effects model with climatic data as a predictor variable. Clones were aggregated into two groups according to their breeding protocol (i.e., standard clone, and improved material) and their growth modelled for future climate scenarios of RCPs 2.6 and 8.5 using a downscaled version of the variants 01 and 21 of UKCP18 climate projections dataset for three 30-year normal period time-slices: 2030s, 2040s, 2050s. The fitted growth models showed highly significant results, explaining more than 85% of the variance, with a mean relative absolute error of approximately 2%. Improved material showed more resistance to warmer and drier climates and less sensitivity to the changing climate. While no unique pattern was found when comparing growth performances, new improved clones were more productive than older clones (e.g., “I-214”) with an additional benefit of resistance to rust and pests. Spatial predictions confirmed the Po valley as the most important geographic area for poplar cultivation in Italy, but zones in Central and Southern Italy show potential. However, the Po Valley is also where poplars are predicted to be suitable in the next decades with large uncertainties. The analysis identified the need for more research on the topic of poplar breeding. For example, models using the most extreme (warm and dry) climate projection, variant 01 of RCP8.5 of the UKCP18, exceeded the historic climate threshold, and predictions used model extrapolation, with associated statistical uncertainty. Therefore, predictions should be considered with care and more research effort is required to test clones over wider environmental conditions.

Poplar ( Populus spp.) is a high-value crop for wood and biomass production and a model organism for tree physiology and genomics. The early release, in 2006, of the complete genome sequence of P. trichocarpa was followed by a wealth of studies that significantly enriched our knowledge of complex pathways inherent to woody plants, such as lignin biosynthesis and secondary cell wall deposition. Recently, in the attempt to cope with the challenges posed by ongoing climate change, fundamental studies and breeding programs with poplar have gradually shifted their focus to address the responses to abiotic stresses, particularly drought. Taking advantage from a set of modern genomic and phenotyping tools, these studies are now shedding light on important processes, including embolism formation (the entry and expansion of air bubbles in the xylem) and repair, the impact of drought stress on biomass yield and quality, and the long-term effects of drought events. In this review, we summarize the status of the research on the molecular bases of the responses to drought in poplar. We highlight how this knowledge can be exploited to select more tolerant genotypes and how it can be translated to other tree species to improve our understanding of forest dynamics under rapidly changing environmental conditions.

Poplar is one of the most important forest trees because of its high economic value. Thanks to the fast-growing rate, easy vegetative propagation and transformation, and availability of genomic resources, poplar has been considered the model species for forest genetics, genomics, and breeding. Being a field-growing tree, poplar is exposed to environmental threats, including biotic stresses that are becoming more intense and diffused because of global warming. Current poplar farming is mainly based on monocultures of a few elite clones and the expensive and long-term conventional breeding programmes of perennial tree species cannot face current climate-change challenges. Consequently, new tools and methods are necessary to reduce the limits of traditional breeding related to the long generation time and to discover new sources of resistance. Recent advances in genomics, marker-assisted selection, genomic prediction, and genome editing offer powerful tools to efficiently exploit the Populus genetic diversity and allow enabling molecular breeding to support accurate early selection, increasing the efficiency, and reducing the time and costs of poplar breeding, that, in turn, will improve our capacity to face or prevent the emergence of new diseases or pests.

The genus Populus represents one of the most economically important groups of forest trees. It is composed by approximately 30 species used for wood and non-wood products, phytoremediation and biomass. Poplar is subjected to several biological and environmental threats although, compared to annual crops, we know far less about the genetic bases of biotic stress resistance. Woolly poplar aphid (Phloeomyzus passerinii) is considered a main pest of cultivated poplars in European and American countries. In this work we present two high density linkage maps in poplar obtained by a genotyping by sequencing (GBS) approach and the identification of QTLs involved in Ph. passerinii resistance. A total of 5,667 polymorphic markers (5,606 SNPs and 61 SSRs) identified on expressed sequences have been used to genotype 131 plants of an F1 population P ×canadensis obtained by an interspecific mate between Populus deltoides (resistant to woolly poplar aphid) and Populus nigra (susceptible to woolly poplar aphid). The two linkage maps, obtained following the two-way pseudo-testcross mapping strategy, have been used to investigate the genetic bases of woolly poplar aphid resistance. One major QTL and two QTLs with minor effects (mapped on LGV, LGXVI and LG XIX) explaining the 65.8% of the genetic variance observed in the progeny in response to Ph. passerinii attack were found. The high density coverage of functional markers allowed the identification of three genes belonging to disease resistance pathway as putative candidates for P. deltoides resistance to woolly poplar aphid. This work is the first report on genetic of woolly poplar aphid genetic resistance and the resistant loci associated markers identified represent a valuable tool in resistance poplar breeding programs.

Ultraviolet (UV) radiations alter a number of metabolic functions in vivant. They produce damages to lipids, nucleic acids and proteins, generating reactive oxygen species such as singlet oxygen (O2), hydroxyl radical (HO) and superoxide anion (O2 (-)). Plants and animals, after their water emersion, have developed biochemical mechanisms to protect themselves from that environmental threat through a common strategy. Melanins in animals and flavonoids in plants are antioxidant pigments acting as free radical scavenging mechanisms. Both are phenol compounds constitutively synthesized and enhanced after exposure to UV rays, often conferring a red-brown-dark tissue pigmentation. Noteworthy, beside anti-oxidant scavenging activity, melanins and flavonoids have acquired secondary functions that, both in plants and animals, concern reproductions and fitness. Plants highly pigmented are more resistant to biotic and abiotic stresses. Darker wild vertebrates are generally more aggressive, sexually active and resistant to stress than lighter individuals. Flavonoids have been associated with signal attraction between flowers and insects and with plant-plant interaction. Melanin pigmentation has been proposed as trait in bird communication, acting as honest signals of quality. This review shows how the molecular mechanisms leading to tissue pigmentation have many functional analogies between plants and animals and how their origin lies in simpler organisms such as Cyanobacteria. Comparative studies between plant and animal kingdoms can reveal new insight of the antioxidant strategies in vivant.

ABSTRACT Tomato hybrids obtained from homozygous progeny of line 30-4, engineered for Tomato spotted wilt virus (TSWV) resistance, were tested under field conditions in two locations with their corresponding nontransgenic hybrids. No transgenic hybrid became infected, but 33 to 50% of plants of each nontransgenic hybrid became infected with a severe reduction of marketable fruit production. The transgenic hybrids conformed to the standard agronomic characteristics of the corresponding nontransgenic ones. Fruit were collected from the nontransgenic plots included in the experimental field and from border rows, and seed were used to estimate the flow of the transgene via pollen. No transgene flow was detected in the protected crops; however, in the open field experiment, 0.32% of tomato seedlings were found to contain the genetic modification. Immunity to TSWV infection in 30-4 hybrids was confirmed in laboratory conditions using mechanical inoculation and grafting. Thrips inoculation in leaf discs of line 30-4 demonstrated that TSWV replication was inhibited at the primary infection site but not in leaf discs of a commercial hybrid containing the naturally occurring resistance gene Sw-5. Due to the high economic value of tomato crops worldwide and the importance of TSWV, the engineered resistance described here is of practical value for breeding into cultivars of commercial interest, because it could be combined with naturally occurring resistance, thus greatly reducing the ability of the virus to develop resistance-breaking strains.

In vitro shoot regeneration ability of 17 (7 Italian and 10 Hungarian) bell pepper genotypes was investigated using excised cotyledons and rooted hypocotyls as explants. Most of the Italian genotypes and two of the Hungarian genotypes responded well, producing shoots from rooted hypocotyls. Only two genotypes (one Italian and one Hungarian) gave a weak response using cotyledons. For direct shoot induction in these explants, in addition to the methods cited in the relevant papers, a new method was applied using thidiazuron as a cytokinin. Shoots were successfully regenerated from cotyledons of two Italian and two Hungarian genotypes using thidiazuron which were considered to be non responsive to the usual methods.