Search

Flame-retardant silane-grafted-graphene oxide (silane-GO) papers are fabricated via a green and versatile silane-assisted assembling strategy, and their use as early fire alarm sensors are investigated. Different silane molecules with alkoxy groups can react with GO in aqueous solution via hydrolysis and condensation reactions and thus assemble into the aligned silane-GO papers. The silane-GO papers exhibit good mechanical flexibility, strong acidic/alkaline tolerance, excellent flame resistance and improved thermal stability at low silane content in comparison with pure GO paper. Structure observation and analysis disclose that a compact nano-silica protective layer transformed from the grafted silane molecules during combustion is formed to inhibit the thermal degradation of GO sheet effectively. Furthermore, the insulating silane-GO paper can be thermally reduced into the conductive reduced GO network after encountering high-temperature or flame situation, thus providing ideal early fire alarm response, i.e. rapid flame detecting response time of ∼1.6 s and fire early warning response of ∼5 s when attach on the heat resistor. These results suggest that the silane-GO papers are promising for development of advanced materials as smart sensors in early fire alarm applications.

Fire prevention and safety of combustible materials is a global challenge. To reduce their high fire risk, traditional smoke detectors are widely used indoor via detecting smoke product after combustion; however, they usually show a long response time and limitation for outdoor use. Herein, we report a temperature-induced electrical resistance transition of graphene oxide wide-ribbon (GOWR) wrapped sponges to reliably monitor fire safety of the combustible materials. Novel rectangle-like GOWR sheets are synthesized from unzipping carbon nanofibers and used to fabricate GOWR wrapped melamine formaldehyde sponges with multi-functionalities, e.g. lightweight, good hydrophobicity, reversible compressibility, excellent acidic/alkaline tolerance and flame resistance. The GOWR sheets on the sponge skeleton can be in-situ thermally reduced once encountering a flame attack or abnormal high temperature, inducing a distinct transition in electrical resistance. Consequently, an ultrafast alarm response of ∼2 s to flame attack is triggered, and rapid fire early warning signals to abnormal high temperatures, e.g. ∼33 s at 300 °C, are achieved below ignition temperature of most combustible materials. This method drives substantial motivation and opportunity to develop advanced fire detection and early warning sensors for reducing the high fire risk of various combustible materials in outdoor applications.

Ultrasensitive and flexible pressure sensors that can perceive and respond to environmental stimuli have attracted considerable attention due to their potential applications in wearable electronics and electronic skin devices. Here, we report a simple and low-cost strategy to fabricate high-performance pressure sensors via constructing a unique conductive/insulating/conductive sandwich-like porous structure (SPS). Interpenetration of the conductive graphene network throughout the porous insulating interlayer produces a highly efficient transition from the non-conductive to the conductive state. Consequently, the SPS sensors exhibit an extreme resistance-switching behavior (resistance change of >105 at 30 kPa), high sensitivity (∼0.67 kPa−1

In this work, hydroxyl-terminated polydimethylsiloxane (H-t-PDMS) nanocomposites reinforced by different contents of graphene oxide nanoribbons (GONRs) were prepared via a facile solvent-free process, and the mechanical properties of the H-t-PDMS/GONR nanocomposites were investigated and compared with the corresponding nanocomposites containing pristine carbon nanotubes (CNTs) or functionalized CNTs (f-CNTs). It was found that the GONRs with abundant functional groups showed good compatibility with the H-t-PDMS matrix at appropriate content: both good dispersion levels of the GONR sheets and strong GONR/matrix interfacial interactions were achieved at low filler content (≤0.5 wt%), although the GONR sheets showed obvious clusters in the matrix at relatively high content. Mechanical testing indicated that the incorporation of a low content of GONRs into the H-t-PDMS polymer resulted in significant improvements in both the tensile and tear strengths, e.g. about 158 and 284% at 0.5 wt% GONRs, respectively; and such reinforcement efficiency of the GONRs in the PDMS nanocomposites was much better than those of the corresponding CNTs or f-CNTs, even superior to those of other carbon nanofillers in previous PDMS-based nanocomposite systems. Based on the morphology and fracture surface analysis, the possible reinforcing mechanisms were discussed and clarified to understand the discrepancies in the mechanical properties of the nanocomposite systems studied.

A flame-retardant graphene oxide (GO) based nanocomposite paper was prepared for efficient fire alarm response via a one-step and green 3-mercaptopropyltrimethoxysilane (MPTS) functionalization process. Such MPTS modification not only improves thermal stability and flame resistance of GO network, but produces ultra-fast flame detection and efficient fire early warning response. Typically, the MPTS-GO-10 wt% paper shows a flame detection response signal of about 1.0 s and improved fire early warning response time at a relatively temperature of 200 °C. The structural observation and analysis suggest that the thermal reduction behavior of GO network can be promoted by the sulfydryl groups of MPTS molecules at high temperature, thus producing the rapid and sensitive transition of electrical resistance form insulating GO into conductive reduced GO network. The MPTS functionalization developed here show promising to tailor fire early warning response of flame-retardant GO based fire alarm sensor for potential fire safety and prevention applications.