Search

Funder: University of Cambridge, Funder: Office of Energy Efficiency and Renewable Energy, We are currently witnessing the dawn of hydrogen (H2) economy, where H2 will soon become a primary fuel for heating, transportation, and long-distance and long-term energy storage. Among diverse possibilities, H2 can be stored as a pressurized gas, a cryogenic liquid, or a solid fuel via adsorption onto porous materials. Metal-organic frameworks (MOFs) have emerged as adsorbent materials with the highest theoretical H2 storage densities on both a volumetric and gravimetric basis. However, a critical bottleneck for the use of H2 as a transportation fuel has been the lack of densification methods capable of shaping MOFs into practical formulations while maintaining their adsorptive performance. Here, we report a high-throughput screening and deep analysis of a database of MOFs to find optimal materials, followed by the synthesis, characterization, and performance evaluation of an optimal monolithic MOF (monoMOF) for H2 storage. After densification, this monoMOF stores 46 g L-1 H2 at 50 bar and 77 K and delivers 41 and 42 g L-1 H2 at operating pressures of 25 and 50 bar, respectively, when deployed in a combined temperature-pressure (25-50 bar/77 K → 5 bar/160 K) swing gas delivery system. This performance represents up to an 80% reduction in the operating pressure requirements for delivering H2 gas when compared with benchmark materials and an 83% reduction compared to compressed H2 gas. Our findings represent a substantial step forward in the application of high-density materials for volumetric H2 storage applications.

This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the TrinityHenry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM -872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. Daniel Siderius: Official contribution of the National Institute of Standards and Technology (NIST), not subject to copyright in the United States of America. Daniel Siderius: Certain commercially available items may be identified in this paper. This identification does not imply recommendation by NIST, nor does it imply that it is the best available for the purposes described. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf)., Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of microand mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This roundrobin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., European Research Council (ERC) ERC-2016-COG 726380 ERC-2015-StG 677289 ERC-2017-StG 756489 639233, UK Research & Innovation (UKRI) Innovate UK 104384 UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) IAA/RG85685, Cambridge International Scholarship TrinityHenry Barlow Scholarship, United States Department of Energy (DOE) DE-FG02-08ER15967, National Nuclear Security Administration DE-NA-0003525, United States Department of Energy (DOE), Alexander von Humboldt Foundation, Center for Information Services and High Performance Computing (ZIH) at TU Dresden, Department of Science & Technology (India), Science Engineering Research Board (SERB), India CRG/2019/000906, Active Co. Research Grant, European Commission through the H2020-MSCA-RISE-2019 program ZEOBIOCHEM -872102, Spanish MICINN and AEI/FEDER RTI2018-099504-B-C21, University of Alicante UATALENTO17-05, Spanish Government SEV-2017-0706 FWO 12T3519N 11D2220N, UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) EP/L015978/1, National Research Foundation of Korea NRF-2017M3A7B4042140 NRF-2017M3A7B4042235, United States Department of Energy (DOE) DE-SC0010596, Indonesian Endowment Fund for Education-LPDP 202002220216006

A thermally induced order-disorder transition of tetraphenylporphyrin (2

Developments in the confinement of phosphines within micro- or nano-environments are explored. Phosphines are ubiquitous across metal coordination chemistry and underpin some of the most famous homogeneous transition metal catalysts. Constraining phosphines within confined environments influences not only their behaviour but also that of their metal complexes. Notable examples include the use of metal-organic frameworks (MOFs) or metal-organic cages (MOCs) to support phosphines which demonstrate how the microenvironment within such constructs leads to reactivity modification. The development of phosphine confinement is explored and parallels are drawn with related constrained macrocyclic systems and mechanically interlocked molecules. The review concludes by identifying areas that remain a challenge and those that will provide new avenues for research.

The synthesis of nanodiamond-perylene diimide composites is reported. Suitably hydroxyl-functionalised perylene diimides (PDIs) are reacted with carboxylic acid functionalised nanodiamonds (NDs) through ester formation. The ND-PDI nanocomposite materials were characterised using a variety of different techniques confirming retention of the ND cores and interestingly the dye properties of the PDIs. In particular, fluorescence measurements suggest that PDIs tethered to NDs retain the characteristics of solution-phase PDIs rather than the optical properties associated with solid-state PDIs which are typically modified due to aggregation. Our relatively simple approach provides a mechanism for maintaining the solution-phase properties of PDIs in solid-state materials.

The current study summarizes the findings of single-gas transport performances of mixed matrix thin-film composite membranes consisting of metal–organic frameworks (MOFs) incorporated into a polymer of intrinsic microporosity (PIM-1). Mg-MOF-74, MIL-53, TIFSIX-3, and Zn2(bim)4 were investigated as stand-alone materials and as incorporated into the PIM-1 polymer matrix serving as a selective layer of thin-film composite membranes by various methods: Fourier-transform infrared spectroscopy, solid-state NMR, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The effect of MOF loading and nature on the mixed-matrix membrane morphology and operation were analyzed by varying the MOF content in the polymer matrix from 2 to 10 wt % with respect to the dry polymer weight. The results show that the incorporation of MOFs into the PIM-1 polymer matrix boosts the permeance and selectivity of H2 and O2 over N2, and the prepared PIM-1/TIFSIX_4 mixed matrix membrane shows better separation performance for CO2/CH4 than pure PIM-1. Such membranes can be good candidates for ammonia purge gas, oxygen enrichment, and acid gas treatment applications.

© 2020 Wiley-VCH GmbH The fields of metal-organic cages (MOCs) and metal-organic frameworks (MOFs) are both highly topical and continue to develop at a rapid pace. Despite clear synergies between the two fields, overlap is rarely observed. This article discusses the peculiarities and similarities of MOCs and MOFs in terms of synthetic strategies and approaches to system characterisation. The stability of both classes of material is compared, particularly in relation to their applications in guest storage and catalysis. Lastly, suggestions are made for opportunities for each field to learn and develop in partnership with the other.

Metal–organic frameworks (MOFs) provide a crystalline scaffold that can act as a host for guest species. In this chapter, recent advances using MOFs as hosts for catalytic metal complexes are discussed. Particular emphasis is given to MOFs that can tether metal complexes to the framework such that the guests adopt a crystalline arrangement. The structures of the tethered complexes and their reactivity can be studied by a variety of techniques, including X-ray diffraction. We discuss examples of reactive species which are kinetically trapped and structurally characterised within an MOF and reports where tethering catalysts to MOFs can lead to enhanced catalytic performance. Finally, we describe guidelines for developing such approaches and for the use of MOFs to study catalytic processes.

A strategy to create organic molecules with high degrees of radical spin multiplicity is reported in which molecular design is correlated with the behaviour of radical anions in a series of BODIPY dyads. Upon reduction of each BODIPY moiety radical anions are formed which are shown to have different spin multiplicities by electron paramagnetic resonance (EPR) spectroscopy and distinct profiles in their cyclic voltammograms and UV-visible spectra. The relationship between structure and multiplicity is demonstrated showing that the balance between singlet, biradical or triplet states in the dyads depends on relative orientation and connectivity of the BODIPY groups. The strategy is applied to the synthesis of a BODIPY triad which adopts an unusual quartet state upon reduction to its radical trianion.

A simple method for the preparation of MIL-53 thin films is reported. By employing a vapour-assisted conversion (VAC) approach we were able to prepare homogeneous MIL-53 films on a variety of glass, silicon or alumina substrates. Our strategy uses a vessel that allows film growth in an environment with a solvent-saturated atmosphere, in this case DMF. The VAC preparative conditions lead to the formation of a homogeneous film of the MOF and avoids the formation of alternative aggregates, such as starting materials. The effect of reaction temperature and time are investigated allowing identification of the optimum conditions to produce good film quality.

In the last decade it has become possible to resolve the geometric structure of organic molecules with intramolecular resolution using high resolution scanning probe microscopy (SPM), and specifically using the subset of SPM known as noncontact atomic force microscopy (ncAFM). In world leading groups it has become routine not only to perform sub-molecular imaging of the chemical, electronic, and electrostatic properties of single molecules, but also to use this technique to track complex on-surface chemical reactions, investigate novel reaction products, and even synthesise new molecular structures one bond at a time. These developments represent the cutting edge of characterisation at the single chemical bond level, and have revolutionised our understanding of surface-based chemical processes.

Co-crystals of thiocyanuric acid (TCA) and five multitopic bases are reported, and their structures are compared. The adducts of all five co-crystals form two-dimensional hydrogen-bonded sheets tha...

Careful changes to the primary coordination sphere of an organometallic species can modify its chemical and physical properties, potentially providing accessible coordinating sites for catalysis or...

Structural insight into reactive species can be achieved via strategies such as matrix isolation in frozen glasses, whereby species are kinetically trapped, or by confinement within the cavities of host molecules. More recently, Metal–Organic Frameworks (MOFs) have been used as molecular scaffolds to isolate reactive metal-based species within their ordered pore networks. These studies have uncovered new reactivity, allowed observation of novel metal-based complexes and clusters, and elucidated the nature of metal-centred reactions responsible for catalysis. This perspective considers strategies by which metal species can be introduced into MOFs and highlights some of the advantages and limitations of each approach. Furthermore, the growing body of work whereby reactive species can be isolated and structurally characterised within a MOF matrix will be reviewed, including discussion of salient examples and the provision of useful guidelines for the design of new systems. Novel approaches that facilitate detailed structural analysis of reactive chemical moieties are of considerable interest as the knowledge garnered underpins our understanding of reactivity and thus guides the synthesis of materials with unprecedented functionality., Metal–organic frameworks can be used to stabilise reactive metal-based species, uncover new reactivity, and investigate metal-centred reactions responsible for catalysis.

A small percentage of an impurity was shown, via scanning tunneling microscopy, to drastically change the on-surface self-assembly behavior of an aromatic tetracarboxylic acid, by initiating the nucleation and growth of a different polymorph. Molecular modelling simulations were used to shed further light onto the dopant-controlled assembly behaviour. ispartof: CHEMICAL COMMUNICATIONS vol:57 issue:12 pages:1454-1457 ispartof: location:England status: published

Batteries that extend performance beyond the intrinsic limits of Li-ion batteries are among the most important developments required to continue the revolution promised by electrochemical devices. Of these next-generation batteries, lithium sulfur (Li–S) chemistry is among the most commercially mature, with cells offering a substantial increase in gravimetric energy density, reduced costs and improved safety prospects. However, there remain outstanding issues to advance the commercial prospects of the technology and benefit from the economies of scale felt by Li-ion cells, including improving both the rate performance and longevity of cells. To address these challenges, the Faraday Institution, the UK’s independent institute for electrochemical energy storage science and technology, launched the Lithium Sulfur Technology Accelerator (LiSTAR) programme in October 2019. This Roadmap, authored by researchers and partners of the LiSTAR programme, is intended to highlight the outstanding issues that must be addressed and provide an insight into the pathways towards solving them adopted by the LiSTAR consortium. In compiling this Roadmap we hope to aid the development of the wider Li–S research community, providing a guide for academia, industry, government and funding agencies in this important and rapidly developing research space.

The on-surface synthesis of covalently bonded materials differs from solution-phase synthesis in several respects. The transition from a three-dimensional reaction volume to quasi-two-dimensional confinement, as is the case for on-surface synthesis, has the potential to facilitate alternative reaction pathways to those available in solution. Ullmann-type reactions, where the surface plays a role in the coupling of aryl-halide functionalised species, has been shown to facilitate extended one- and two-dimensional structures. Here we employ a combination of scanning tunnelling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and X-ray standing wave (XSW) analysis to perform a chemical and structural characterisation of the Ullmann-type coupling of two iodine functionalised species on a Ag(111) surface held under ultra-high vacuum (UHV) conditions. Our results allow characterisation of molecular conformations and adsorption geometries within an on-surface reaction and provide insight into the incorporation of metal adatoms within the intermediate structures of the reaction. Ullmann-type reactions on metal surfaces are widely studied examples of on-surface synthesis. Here the combination of normal incidence X-ray standing wave analysis, X-ray photoelectron spectroscopy, and scanning tunneling microscopy enables the characterisation of molecular conformations in two such reactions.

Support by EPSRC (EP/E061303/1, EP/D048761/1) and the Chinese Scholarship Council and the University of St Andrews for a stipend (Z. Y.) are gratefully acknowledged. A scheme for the generation of bimetallic nanoparticles is presented which combines electrodeposition of one type of metal, coordinated to a self-assembled monolayer (SAM), with another metal deposited from the bulk electrolyte. In this way PdCu nanoparticles are generated by initial complexation of Pd2+ to a SAM of 3-(4-(pyridine-4-yl)phenyl)propane-1-thiol (PyP3) on Au/mica and subsequent reduction in an acidic aqueous CuSO4 electrolyte. Cyclic voltammetry reveals that the onset of Cu deposition is triggered by Pd reduction. Scanning tunneling microscopy (STM) shows that layers of connected particles are formed with an average thickness of less than 3 nm and lateral dimensions of particles in the range of 2 to 5 nm. In X-ray photoelectron spectra a range of binding energies for the Pd 3d signal is observed whereas the Cu 2p signal appears at a single binding energy, even though chemically different Cu species are present: normal and more noble Cu. Up to three components are seen in the N 1s signal, one originating from protonated pyridine moieties, the others reflecting the SAM-metal interaction. It is suggested that the coordination controlled electrodeposition yields layers of particles composed of a Pd core and a Cu shell with a transition region of a PdCu alloy. Deposited on top of the PyP3 SAM, the PdCu particles exhibit weak adhesion which is exploited for patterning by selective removal of particles employing scanning probe techniques. The potential for patterning down to the sub-10 nm scale is demonstrated. Harnessing the deposition contrast between native and PdCu loaded PyP3 SAMs, structures thus created can be developed into patterned continuous layers. Postprint

Functionalization of boron-dipyrrin (BODIPY) chromophores with pyridine (1) or pyrimidine (2) substituents affords molecules with strong absorbance in the visible spectrum which are also highly fluorescent in solution, in thin films and as powders. Reaction of either 1, a bipyridyl ligand, or 2, a bipyrimidinyl ligand, with CuI in MeCN affords a one-dimensional coordination polymer (3) or a three-dimensional coordination polymer (4), respectively. Although the free ligands, 1 and 2, exhibit fluorescence in the solid-state, metal coordination in the CuI coordination polymers, 3 and 4, leads to quenching despite the retention of the BODIPY core.

Perylene diimides (PDIs) are promising candidates for n-type semiconductor materials and, thus, for use in organic electronics. Thionation of the imide moiety provides an efficient strategy to control the donor–acceptor gap of these types of compounds, although the degree and selectivity of thionation can be hard to achieve. Through the design of a sterically encumbered PDI–phenothiazine dyad, a previously unattained geminal thionation pattern has been realized, providing the first example of a perylene-monoimide-monothioimide. The electrochemical and solid-state structural properties of this uniquely thionated dyad are reported and compared to those of the nonthionated parent molecule. It is found that thionation enhances the electron affinity of the PDI core, affecting electrochemical and spectroelectochemcial behavior of the dyad without significantly affecting the solid-state packing of the molecules.

The structural characterization of single crystals of di-4-pyridyl-substituted 3,4,9,10-perylenetetracarboxylic diimide reveals a surprising triple helical arrangement. The intermolecular interactions that lead to such an arrangement are investigated by Hirshfeld surface analysis and indicate that the supramolecular structure arises due to a combination of C–H···O interactions and π–π stacking interactions between adjacent perylene diimide (PDI) species. The interplay of these interactions leads to the formation of a tubular structure enclosed by the triple helix of PDI molecules. In contrast, the analogous phenyl-substituted molecule forms a simple one-dimensional stack of PDI molecules which is also unusual in that the perylene core adopts an essentially planar arrangement despite bay substitution.

The effects of using low molecular weight alcohols, methanol (MeOH) and ethanol (EtOH), for the synthesis of MIL-53(Al) are investigated and the results are directly compared with analogous synthesis in water and N,N-dimethylformamide (DMF). We have successfully synthesised MIL-53(Al), termed MIL-53(MeOH), using MeOH as the solvent and employing a reaction temperature of 150 °C, lower than that typically used for analogous water or DMF-based reactions. Several unique properties are observed for MIL-53(MeOH). The breathing phenomenon which is known for MIL-53(Al) derivatives, prepared using water or DMF as the reaction solvent, is not observed for samples prepared from MeOH and the framework adopts and remains in the large-pore form. Thus, measurement of N2-isotherms and calculation of internal surface areas have verified that the synthesis of MIL-53(MeOH) leads to a product which is highly porous with only minimal or no activation required. Furthermore, X-ray diffraction measurements and scanning electron microscopy at different humidity levels reveal a reversible loss of crystallinity at high humidity levels for MIL-53(MeOH) which was not observed previously for other MIL-53 derivatives. In contrast, the synthesis of MIL-53(Al) in ethanol leads to a product with low crystallinity.

On-surface reactions based on metal-catalysed Ullmann coupling have been successfully employed to synthesise a wide variety of covalently coupled structures. Substrate chemistry and topology are both known to effect the progression of an on-surface reaction; offering routes to control efficiency and selectivity. Here, we detail ultra-high vacuum scanning probe microscopy experiments showing that templating a catalytically active surface, via a supramolecular template, influences the reaction pathway of an on-surface Ullmann-type coupling reaction by inhibiting one potential intermediate structure and stabilising another.

Functionalization of the aromatic core of naphthalene diimide (NDI) chromophores with morpholine substituents leads to molecules with strong absorbance in the visible spectrum. The shift of absorption maxima to lower energy is determined not only by the degree of substitution but also by the relative conformation and orientation of the tertiary amine with respect to the plane of the NDI.

Designing porous materials which can selectively adsorb CO2 or CH4 is an important environmental and industrial goal which requires an understanding of the host–guest interactions involved at the atomic scale. Metal–organic polyhedra (MOPs) showing permanent porosity upon desolvation are rarely observed. We report a family of MOPs (Cu-1a, Cu-1b, Cu-2), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. Thus, for Cu-1a, the void fraction outside the cages totals 56% with only 2% within. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analyses. The exceptional stability of Cu-1a enables a detailed structural investigation into the adsorption of CO2 and CH4 using in situ X-ray and neutron diffraction, coupled with DFT calculations. The primary binding sites for adsorbed CO2 and CH4 in Cu-1a are found to be the open metal sites and pockets defined by the faces of phenyl rings. More importantly, the structural analysis of a hydrated sample of Cu-1a reveals a strong hydrogen bond between the adsorbed CO2 molecule and the Cu(II)-bound water molecule, shedding light on previous empirical and theoretical observations that partial hydration of metal−organic framework (MOF) materials containing open metal sites increases their uptake of CO2. The results of the crystallographic study on MOP–gas binding have been rationalized using DFT calculations, yielding individual binding energies for the various pore environments of Cu-1a., We report a family of metal−organic polyhedra (MOP), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analysis. A detailed structural investigation into the adsorption of CO2 and CH4 is reported using in situ X-ray and neutron diffraction, coupled with DFT calculations.

Functionalization of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) chromophores at the 2,6-positions with iodo substituents and morpholino-substituted &alpha, methyl groups affords molecules with strong absorbance in the visible spectrum. The effect of such substitution on the solid-state arrangements, absorption, fluorescence and electronic properties of these dye molecules is reported. The spectroscopic and spectroelectrochemical measurements display intense absorptions in the UV-visible spectrum with bathochromic shifts, in comparison to unfunctionalized BODIPY, and a positive shift in redox potentials due to functionalisation of the BODIPY core. Halogen bonds are observed in the solid-state structures of both halogenated BODIPY species, which in one case leads to the formation of an unusual halogen bonded framework.

A strategy for positioning, and loosely connecting, molecules in close proximity using mechanically interlocked handcuffs is described. The strategy is demonstrated using rylene diimides, creating dimeric structures in which two components are linked through pillar[5]arene/imidazolium rotaxanes. Investigation of the resulting molecules demonstrates intriguing and new properties that arise from placing these redox active dye molecules together, allowing interactions, whilst allowing the molecules to separate as required. In particular we observe excimer emission from a perylene diimide dimer handcuff and the formation of an unusual radical anion π-dimer upon double reduction of the same molecule. The latter exhibits a unique visible absorption profile for a PDI-based molecule. We demonstrate the flexibility of our approach by making an unprecedented mixed perylene diimide/naphthalene diimide dimer which also reveals interactions between the two components. Our synthetic strategy facilitates the creation of unusual dimeric structures and allows the investigation of intermolecular interactions and the effects they have on electronic and magnetic properties.

The thin-film synthesis of the hybrid ultramicroporous material (HUM) TIFSIX-3-Ni on glass substrates are reported for the first time. Several methods of film formation are employed including dip-coating, seeding and secondary growth, vapour-assisted conversion, rapid thermal deposition and in-situ coating. Using the in-situ approach with dimethylformamide as solvent, we were able to grow homogeneous TIFSIX-3-Ni films at relatively low temperatures (85 °C) and short times (5 h) without substrate modification. During this study, we also significantly reduced the TIFSIX powder synthesis time to 15 h.

When Ni(NO3)2∙6H2O and N,N’-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide (DPNDI) are reacted, a one-dimensional coordination polymer (1) is formed. However, reaction with either terephthalic acid (2) or 2,6-naphthalenedicarboxylic acid (3) affords two-dimensional, pillared metal-organic frameworks. 2 and 3 containing rectangular voids of different dimensions which are dictated by the carboxylate ligand and the arrangement of the [M(k2-O2NO)]2(μ2-O2CR)2] secondary building unit (SBU) that forms the nodes of the framework. The role of SBU geometry, intermolecular face-to-face π–π and lone pair–π interactions involving the DPNDI ligands are discussed.

The electronic effects of varying the nature of the carbonyl groups in a series of perylene-3,4,9,10-tetracarbonyl compounds have been investigated. The four carbonyl groups comprise of esters, imides and anhydrides and combinations thereof. The series has been extensively characterised by electrochemical methods and it is found that the combination of imide and anhydride groups enhances the electron accepting properties of the perylene core. In contrast, the perylene core is the most electron rich when each of the four peri-positions is functionalised with an ester group. In the case of tetra-esterified perylene a reversible oxidation process can also be observed. The nature of the carbonyl species provides a degree of redox potential tunability whilst maintaining similar optical properties of the chromophores. This suggests that careful selection of peri-substituents is important in the fabrication of optoelectronic devices incorporating 3,4,9,10-tetracarbonyl perylene species.

Metal-organic Frameworks (MOFs) represent a growing field of materials that are receiving widespread attention due to their fascinating structures, intriguing properties, and applications across many disciplines. This review seeks to demonstrate the scope of MOF chemistry which uses the full breadth of the periodic table, whether those elements act as the metals that form the connecting nodes of the MOF, the ligands that link those metal-based nodes or the guests that sit in the MOF pores.

The development of supramolecular synthons capable of driving hierarchical two-dimensional (2D) self-assembly is an important step toward the growth of complex and functional molecular surfaces. In this work, the formation of nucleobase quartets consisting of adenine and thymine groups was used to control the 2D self-assembly of porphyrins. Tetra-(phenylthymine) zinc porphyrin (Zn-tetra-TP) and tetra-(phenyladenine) porphyrin (tetra-AP) were synthesized, and scanning tunneling microscopy (STM) experiments were performed to visualize their self-assembly at the liquid–solid interface between an organic solvent and a graphite surface. Monocomponent solutions of both Zn-tetra-TP and tetra-AP form stable 2D structures with either thymine–thymine or adenine–adenine hydrogen bonding. Structural models based on STM data were validated using molecular mechanics (MM) simulations. In contrast, bicomponent mixtures showed the formation of a structure with p4 symmetry consisting of alternating Zn-tetra-TP and tetra-AP molecules in a chessboard type pattern. The relative positions of the porphyrin components were identified from STM images via contrast changes associated with the zinc atom present in Zn-tetra-TP. MM simulations suggest that hydrogen bonding interactions within these structures are based on the formation of adenine–thymine (ATAT) quartets with Watson–Crick base pairing between adenine and thymine groups.

Metal coordination to a series of bis (imidazolium)…pillar[5]arene [2]rotaxanes through the formation of metal-carbene bonds facilitates a new strategy to restrict the shuttling motion in [2]rotaxanes. Whereas the pillar[5]arene macrocycle rapidly shuttles along the full length of the bis (imidazolium) rod for the parent [2]rotaxane, Ag(i) coordination to the imidazolium groups through the formation of N-heterocyclic carbenes leads to restricted motion, effectively confining the shuttling motion of the [2]rotaxane. The Ag(i) coordinated [2]rotaxanes can be reacted further, either removing the Ag-carbene species to recreate the parent [2]rotaxane, or reaction with more bulky Pd(ii) species to further restrict the shuttling motion through steric inhibition.

Site-selective organic transformations are commonly required in the synthesis of complex molecules. By employing a bespoke metal-organic framework (MOF, 1·[Mn(CO)3N3]), in which coordinated azide anions are precisely positioned within 1D channels, we present a strategy for the site-selective transformation of dialkynes into alkyne-functionalized triazoles. As an illustration of this approach, 1,7-octadiyne-3,6-dione stoichiometrically furnishes the mono-“click” product N-methyl-4-hex-5’-ynl-1’,4’dione-1,2,3-triazole with only trace bis-triazole side-product. Stepwise insights into conversions of the MOF reaction vessel were obtained by X-ray crystallography, demonstrating that the reactive sites are “isolated” from one another. Single-crystal to singlecrystal transformations of the Mn(I)-metalated material 1·[Mn(CO)3(H2O)]Br to the corresponding azide species 1·[Mn(CO)3N3] with sodium azide, followed by a series of [3+2] azide-alkyne cycloaddition reactions, are reported. The final liberation of the “click” products from the porous material is achieved by N-alkylation with MeBr, regenerating starting MOF 1·[Mn(CO)3(H2O)]Br, and the organic products characterized by NMR spectroscopy and mass spectrometry. Once the dialkyne length exceeds the azide separation, site selectivity is lost, confirming the critical importance of isolated azide moieties for this strategy. We postulate that carefully designed MOFs can act as physical protecting groups to facilitate other site-selective and chemoselective transformations.