Search

Combining ability and heterosis for within-boll yield components and fibre quality traits were carried out using line × tester mating system in upland cotton at the University of Agriculture, Faisalabad, Pakistan.Variance due to specific combining ability was greater than general combining ability for all the traits depicting the importance of non-additive genetic effects.The line BH-89 was found to be good general combiner for lint mass per boll, seed volume per 100 seeds, surface area per seed and lint percentage. NIAB-999 was good general combiner for fibre fineness. The third line which was actually the F1 of the first two lines performed better regardingseed number per boll, seed mass per bolland fibre strength.Among testers, NIAB-78 exhibited higher GCA effects for seed number per boll, lint mass per boll and fibre fineness while CIM-1100 proved to be good general combiner for seed volume per 100-seeds, surface area per seed and lint percentage. NIAB-999 × VH-144 exhibited the highest SCA effects regarding seeds per boll and seed mass per boll while the cross NIAB-999 × CIM-70 was considered desirable for seed volume per 100-seeds and surface area per seed. Maximum heterosis over better parent for lint mass per boll and lint percentage was observed for the cross BH-89 × NIAB-78 while for seed volume per 100-seeds and surface area per seed, NIAB-999 × CIM-240 was the best. [ABSTRACT FROM AUTHOR]

A new class of thiophene-based molecules of 5-bromothiophene-2-carboxylic acid ( 1 ) have been synthesized in current research work. All analogs 4A - 4G were synthesized with optimized conditions by coupling reactions of 2-ethylhexyl 5-bromothiophene-2-carboxylate ( 3 ) with various arylboronic acids. The results indicated that the majority of compounds showed promising effective in vitro antibacterial activity. Herein, 2-ethylhexyl-5-(p-tolyl)thiophene-2-carboxylate ( 4F ), in particular among the synthesized analogs, showed outstanding antibacterial action (MIC value 3.125 mg/mL) against XDR Salmonella Typhi compared to ciprofloxacin and ceftriaxone. The intermolecular interaction was investigated by using a molecular docking study of thiophene derivatives 4A - 4G against XDR S . Typhi. The values of the binding affinity of functionalized thiophene molecules and ciprofloxacin were compared against bacterial enzyme PDB ID: 5ztj. Therefore, 4F appears to be a promising antibacterial agent and showed the highest potential value. Density functional theory (DFT) calculations were executed to examine the electronic, structural, and spectroscopic features of the newly synthesized molecules 4A - 4G .

Background: Cotton is the world's richest source of natural fiber. Meanwhile cotton plant is top ranked stress sensitive plant thereby affecting its yield and fiber quality. But, in climate change scenario, fiber yield and quality are being affected due to environmental stresses, especially heat, drought and salinity. Present study is aimed to identify cotton genotype harboring prominently expressed stress responsive genes., Methods: Four cotton genotypes (IUB-13, IUB-222, IUB-09 and MM-58) were evaluated under drought and salinity stress for yield traits and expression of different stress responsive genes (GhWRKY3, GhDREB2 and GhRDR6)., Results: Pronounced expression of GhWRKY3, GhDREB2and GhRDR6 was observed in cotton variety IUB-13 in stress condition (drought and salinity) as compared to control followed by IUB-222 which revealed that these genotypes might possess substantial potential to cope with environmental hazards encountered in growing season CONCLUSION: Utilization of cotton genotypes i.e., IUB-13 and IUB-222 in cotton breeding program can be very much fruitful for developing cotton genotypes adoptable to climate change., (© 2021. The Author(s), under exclusive licence to Springer Nature B.V.)

Topological indices correlate certain physicochemical properties like boiling point, stability, and strain energy of chemical compounds. In this report, we compute M-polynomials for PAMAM dendrimers and polyomino chains. Moreover, by applying calculus, we compute nine important topological indices of under-study dendrimers and chains.

There has been a recent debate that boron nanotubes can outperform carbon nanotubes on many grounds. The most stable boron nanotubes are made of a hexagonal lattice with an extra atom added to some of the hexagons called ∝-boron nanotubes. Closed forms of M-polynomial of nanotubes produce closed forms of many degree-based topological indices which are numerical parameters of the structure and determine physico-chemical properties of the concerned nanotubes. In this article, we compute and analyze many topological indices of ∝-boron nanotubes correlating with the size of structure of these tubes through the use of M-polynomial. More importantly we make a graph-theoretic comparison of indices of two types of boron nanotubes namely triangular boron and ∝-boron nanotubes.

Topological indices are numerical parameters used to study the physical and chemical properties of compounds. In quantitative structure⁻activity relationship QSARs, topological indices correlate the biological activity of compounds with their physical properties like boiling point, stability, melting point, distortion, and strain energy etc. In this paper, we determined the M-polynomials of the crystallographic structure of the molecules Cu₂O and T i F₂ [ p,q,r ]. Then we derived closed formulas for some well-known topological indices using calculus. In the end, we used Maple 15 to plot surfaces associated with the topological indices of Cu₂O and T i F₂ [ p,q,r ]., Competing Interests: The authors declare no conflicts of interest.

Many degree-based topological indices can be obtained from the closed-off M-polynomial of a carbon nanocone. These topological indices are numerical parameters that are associated with a structure and, in combination, determine the properties of the carbon nanocone. In this paper, we compute the closed form of the M-polynomial of generalized carbon nanocone and recover many important degree-based topological indices. We use software Maple 2015 (Maplesoft, Waterloo, ON, Canada) to plot the surfaces and graphs associated with these nanocones, and relate the topological indices to the structure of these nanocones.

In this paper we prove the Hadamard and the Fejér-Hadamard inequalities for the extended generalized fractional integral operator involving the extended generalized Mittag-Leffler function. The extended generalized Mittag-Leffler function includes many known special functions. We have several such inequalities corresponding to special cases of the extended generalized Mittag-Leffler function. Also there we note the known results that can be obtained., Competing Interests: It is declared that the authors have no competing interests.

V-Phenylenic nanotubes and nanotori are most comprehensively studied nanostructures due to widespread applications in the production of catalytic, gas-sensing and corrosion-resistant materials. Representing chemical compounds with M-polynomial is a recent idea and it produces nice formulas of degree-based topological indices which correlate chemical properties of the material under investigation. These indices are used in the development of quantitative structure-activity relationships (QSARs) in which the biological activity and other properties of molecules like boiling point, stability, strain energy etc. are correlated with their structures. In this paper, we determine general closed formulae for M-polynomials of V-Phylenic nanotubes and nanotori. We recover important topological degree-based indices. We also give different graphs of topological indices and their relations with the parameters of structures.

In this note, we give fixed point results in fractal generation (Julia sets and Mandelbrot sets) by using Noor iteration scheme with s-convexity. Researchers have already presented fixed point results in Mann and Ishikawa orbits that are examples of one-step and two-step feedback processes respectively. In this paper we present fixed point results in Noor orbit, which is a three-step iterative procedure.

Gossypium arboreum, a cultivated cotton species (2n = 26, AA) native to Asia, possesses invaluable characteristics unavailable in the tetraploid cultivated cotton gene pool, such as resistance to pests and diseases and tolerance to abiotic stresses. However, it is quite difficult to transfer favorable traits into Upland cotton through conventional methods due to the cross-incompatibility of G. hirsutum (2n = 52, AADD) and G. arboreum. Here, we improved an embryo rescue technique to overcome the cross-incompatibility between these two parents for transferring favorable genes from G. arboreum into G. hirsutum. Our results indicate that MSB2K supplemented with 0.5 mg l(-1) kinetin and 250 mg(-1) casein hydrolysate is an efficient initial medium for rescuing early (3 d after pollination) hybrid embryos. Eight putative hybrids were successfully obtained, which were further verified and characterized by cytology, molecular markers and morphological analysis. The putative hybrids were subsequently treated with different concentrations of colchicine solution to double their chromosomes. The results demonstrate that four putative hybrid plants were successfully chromosome-doubled by treatment with 0.1% colchicine for 24 h and become amphiploid, which were confirmed by cytological observation, self-fertilization and backcrossing. Preliminary assessments of resistance at seedling stage indicate that the synthetic amphiploid showed highly resistant to Verticillium and drought. The synthetic amphiploid between G. hirsutum × G. arboreum would lay the foundation for developing G. arboreum-introgressed lines with the uniform genetic background of G. hirsutum acc TM-1, which would greatly enhance and simplify the mining, isolation, characterization, cloning and use of G. arboreum-specific desirable genes in future cotton breeding programs.

Cotton leaf curl virus disease (CLCuD) is an important constraint to cotton production. The resistance of G. arboreum to this devastating disease is well documented. In the present investigation, we explored the possibility of transferring genes for resistance to CLCuD from G. arboreum (2n = 26) cv 15-Mollisoni into G. hirsutum (2n = 52) cv CRSM-38 through conventional breeding. We investigated the cytology of the BC1 to BC3 progenies of direct and reciprocal crosses of G. arboreum and G. hirsutum and evaluated their resistance to CLCuD. The F1 progenies were completely resistant to this disease, while a decrease in resistance was observed in all backcross generations. As backcrossing progressed, the disease incidence increased in BC1 (1.7-2.0%), BC2 (1.8-4.0%), and BC3 (4.2-7.0%). However, the disease incidence was much lower than that of the check variety CIM-496, with a CLCuD incidence of 96%. Additionally, the disease incidence percentage was lower in the direct cross 2(G. arboreum)×G. hirsutum than in that of G. hirsutum×G. arboreum. Phenotypic resemblance of BC1 ∼BC3 progenies to G. arboreum confirmed the success of cross between the two species. Cytological studies of CLCuD-resistant plants revealed that the frequency of univalents and multivalents was high in BC1, with sterile or partially fertile plants, but low in BC2 (in both combinations), with shy bearing plants. In BC3, most of the plants exhibited normal bearing ability due to the high frequency of chromosome associations (bivalents). The assessment of CLCuD through grafting showed that the BC1 to BC3 progenies were highly resistant to this disease. Thus, this study successfully demonstrates the possibility of introgressing CLCuD resistance genes from G. arboreum to G. hirsutum.