Search

Context First-time dental treatment for children is often sought due to carious, malformed, fractured, and discolored teeth. The strip crown represents a highly esthetic and popular option for the restoration of primary anterior teeth. However, there are limited data on the clinical success of these crowns based on the extent of surface area used for adhesion. Aims, settings and design This in vivo study aimed to assess the clinical, radiographic, and photographic performance of 66 composite strip crown restorations on primary anterior teeth for up to 15 months and compare the outcome based on the extent and surface area of tooth structure available. Materials and methods The amount of surface area available in each group after removal of affected enamel was evaluated through 3D scanning of study casts and digital measurements. The teeth were thus grouped into three categories: group I with crown structure involvement up to the incisal one-third, group II with involvement up to the middle of the middle third, and group III with involvement up to the cervical one-third. Statistical analysis used Kruskal–Wallis H test and Mann–Whitney U test were used for computation of mean scores for intra- and intergroup comparison, respectively. Scoring was done as per FDI clinical criteria on a scale of 1 to 5. Results Group III showed the highest mean scores at different time intervals and also the highest failure rate (52.38%), followed by group II (12%) and group I (5%). The overall retention rate observed for the strip crowns was 77.28% at the end of 15 months. Conclusion Strip crowns should be considered for teeth that offer a minimum of half to two-thirds of the healthy tooth structure remaining. Further, longitudinal studies are required to add to the results of the final outcome of these restorations. Key messages A critical surface area value of

The efficacy of continuous glucose monitors (CGM) to improve glycaemic control in individuals on intensive insulin therapy (basal and prandial) has been well established in several studies; however, there is limited evidence on its usage and efficacy in patients with type 2 diabetes (T2D) who are on non-insulin therapies. Lifestyle modifications and glucose monitoring are essential components of the management of T2D. We report a case that demonstrates the impact of CGM use as an effective tool for patient education and motivation to implement and adhere to lifestyle modifications in improving glycaemic control in a patient with long-standing poorly controlled T2D who was on oral glucose-lowering medications. CGM use is associated with high level of patient satisfaction which can improve quality of life and has the potential to reduce long-term complications related to poor glycaemic control. These observations emphasise the need to broaden the use of CGM in this patient population.

Aim and objective The aim and objective of this study was to review the literature to analyze the prevalence of developmental dental anomalies regarding shape in India. Background Although there have been several studies investigating the prevalence of individual dental anomalies related to shape, only a few studies considered all subtypes and their distribution among genders, especially in India. Results An electronic search was made in the PUBMED database to review prevalence-based data on developmental dental anomalies related to shape in India up to December 2018. A diverse range of results regarding prevalence of developmental dental anomalies related to shape were seen in these studies due to vast regional, cultural, and ethnic diversities and various environmental factors affecting the tooth development. Conclusion There is a necessity to conduct more study on shape-related dental anomalies because there are very limited studies regarding prevalence of concrescence, dilacerations, and accessory root and various associated factors. Clinical significance Early diagnosis and timely management of these anomalies can prevent complications. The knowledge on identification and prevalence of dental anomalies helps the dental practitioners improve the treatment plan. The prevalence studies can be of utmost importance in the formulation of oral healthcare programs by using their data to analyze the intensity of dental anomalies. How to cite this article Goswami M, Bhardwaj S, Grewal N. Prevalence of Shape-related Developmental Dental Anomalies in India: A Retrospective Study. Int J Clin Pediatr Dent 2020;13(4):407-411.

Additional file 1 Tables S1-3: Factors affecting population. Tables S4-8: Factors affecting women. Table 9: Comparison between countries with and without missing ECC data.

Background: Organic amine fluorides and nano-hydroxyapatite dentifrices have shown remineralization potential in various studies. However, there is a lack of direct comparison between amine fluoride and nano-hydroxyapatite with conventional inorganic fluorides as sodium monofluorophosphate. Aim: The aim of the study is to evaluate remineralizing efficacy of the three dentifrices on both primary and permanent enamel surfaces. Methods: Enamel sections were obtained from 40 sound molars – 20 primary and 20 permanent molars. Five enamel slabs were prepared from these extracted molars stored in artificial saliva, wherein one slab acted as control, second as demineralized (negative control), and other three slabs were brushed with sodium monofluorophosphate, amine fluoride, and nano-hydroxyapatite dentifrices, respectively, twice daily for 21 days. Scanning electron microscopy- Energy dispersive spectroscopy (SEM-EDS) analysis for surface morphology and calcium and phosphorus content and Vickers surface microhardness (SMH) values were evaluated at baseline, after demineralization, and postapplication of the experimental agents. Results: Highly significant changes in calcium phosphorus ratio and SMH values were seen in enamel slabs treated with nano-hydroxyapatite and amine fluoride dentifrice as compared to sodium monofluorophosphate in both primary and permanent teeth. Surface morphology of enamel slabs treated with amine fluoride most closely resembled natural enamel morphology, while sodium monofluorophosphate-treated surfaces showed globular pattern of remineralization. Deposition of a separate highly mineralized layer over existing surface was seen in nano-hydroxyapatite-treated surfaces. Conclusions: Nano-hydroxyapatite exhibited highest remineralization potential in terms of mineral gain followed by amine fluoride and sodium monofluorophosphate dentifrice.

Background: Enamel remineralization potential of variety of products has been established, but there is a lack of evidence of comparison of remineralization potential of natural versus synthetic products. Aim: The aim of this study was to compare the enamel remineralization potential of saliva, cheese, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP)-based synthetic agent, and fluoride toothpaste. Design: In situ study was carried out on sixty individuals who wore an intraoral appliance containing demineralized enamel slabs for each agent. One out of six slabs was kept as a control so as to record the baseline values (neither subjected to demineralization nor remineralization). Experimental agents were applied on the designated enamel slabs on day 1, 4, 7, and 10 with a crossover wash out period of 7 days. Quantitative values of mineral content of slab were measured using energy dispersive X-ray and qualitative changes in surface topography of slab were seen under scanning electron microscope at ×20K magnification. Results: Highly significant changes from baseline values were seen in calcium and phosphorus content of slabs treated with cheese and CPP-ACP-based agent whereas levels of fluoride were significantly higher in enamel slabs treated with fluoride-containing toothpaste. Conclusion: Cheese is an organic, economical, and user-friendly option over prescribed synthetic agents. A synergistic effect of fluoride-containing toothpaste with intake of cheese could be a good enamel remineralization protocol.

Maltogenic α-amylase is widely used as an antistaling agent in bakery foods. The objective of this study was to determine the degree of hydrolysis (DH) and starch structure after maltogenic amylase treatments in relation to its retrogradation. Waxy maize starch was cooked and hydrolyzed to different degrees by a maltogenic amylase. High-performance anion-exchange chromatography and size exclusion chromatography were used to determine saccharides formed and the molecular weight (Mw) distributions of the residual starch structure, respectively. Chain length (CL) distributions of debranched starch samples were further related to amylopectin (AP) retrogradation. Differential scanning calorimetry (DSC) results showed the complete inhibition of retrogradation when starches were hydrolyzed to >20% DH. Mw and CL distributions of residual AP structure indicated that with an increase in %DH, a higher proportion of unit chains with degree of polymerization (DP) ≤9 and a lower proportion of unit chains with DP ≥17 were formed. A higher proportion of short outer AP chains that cannot participate in the formation of double helices supports the decrease in and eventual inhibition of retrogradation observed with the increase in %DH. These results suggest that the maltogenic amylase could play a powerful role in inhibiting the staling of baked products even at limited starch hydrolysis.

Aims: To assess whether educating the parents, teachers, and intermediate school children of Amritsar city about the emergency management of tooth avulsion was an effective method of increasing success rate of treatment of avulsion. Subjects and Methods: Self-administered questionnaires were prepared for 200 parents, teachers, and for intermediate school children to assess baseline knowledge. Sociodemographic distribution of the targeted group was carried out applying Kuppuswamy scale. Two months later, flip cards and posters were distributed to the selected sample followed by a reinforcement session conducted after 1 month in the form of slide presentations on dental trauma. After 3 months, reassessment performance was distributed to the same participants for reassessing any change in baseline knowledge. Further analysis of knowledge, attitude, and practices were carried out after 6 months. The scores based on Likert scale ranging 0-3 were obtained and put to statistical analysis to analyze efficacy of this program 12 months from baseline data. Results and Conclusion: Wilcoxon signed ranked test was applied to nonparametric data to study the knowledge before and after education was carried out. There was a significant change in the knowledge level of children, teachers, and parents after the campaign and teachers showed more positive change in the practice of emergency management of tooth avulsion, endorsing the fact that comprehensive dental education programs targeting school teachers and children can change the perspective of individuals toward treatment needs for dental trauma involving avulsion.

The transversus abdominis plane (TAP) block is a relatively straightforward regional technique used for postoperative analgesia in patients undergoing abdominal surgeries. Various adjuvants have been used in past to prolong the duration of action of analgesia in peripheral nerve blocks. Several studies investigating the analgesic efficacy of dexamethasone added to local anesthetic agents, such as bupivacaine, have shown promising results. However, there are few studies comparing the efficacy of dexamethasone with ropivacaine.To determine if the addition of dexamethasone 8 mg to ropivacaine 0.2% in a TAP block would prolong the analgesic effect when compared with ropivacaine 0.2% alone after inguinal hernia repair and spermatocelectomy.A randomized, double blinded, placebo-controlled, prospective study.Teaching hospital.A total of 82 patients undergoing inguinal hernia repair or spermatocelectomy were enrolled in the study, of which 41 patients received TAP block with ropivacaine with saline, and the other 41 received ropivacaine with dexamethasone immediately following surgery. Both the proceduralist (resident) and the patient were blinded to the solution used. Visual analog pain scores (0 - 10) were obtained pre-block and immediately post block. Our primary endpoint was visual analog pain score at 12 hours, with 24 and 48-hour pain scores as the secondary endpoints.The averaged pre-block pain score was 7.6 ± 1.7 in the saline group and 7.7 ± 2.2 in the dexamethasone group. There was an improvement in the pain scores from the baseline, at 12 hours after the administration of the block in both the groups. Although the dexamethasone group had a greater change in pain score (-3.2) than the saline group (-2.2), the difference between the 2 groups was not statistically significant (0.08). We did not observe significant differences in change from baseline at 24 hours and 48 hours between the 2 groups (P value = 0.74 and 0.44, respectively).We did not assess the total dose of analgesics used during the surgery with the assumption that the effect of intraoperative analgesics should wear off by the time we collect the 12-hour pain score. We did not control for the expertise of the provider that performed the block, as some of the providers may have been junior residents with limited experience and expertise in the area. Additionally, we were unable to include postoperative opioid consumption due to concerns of inconsistencies during patient reporting and data quality.In conclusion, we could not show a statistically significant prolongation of analgesia for TAP blocks with ropivacaine when dexamethasone was added, though there was a one point drop in pain score at 12 hours post block when dexamethasone was added to the block solution. This decrease in pain scores at 12 hours may still be beneficial to patient satisfaction given the low side effect profile of dexamethasone. As ropivacaine has a lower pH than other local anesthetic agents, further well designed studies are needed to investigate the combination of this drug with more alkaline drugs like corticosteroids.Regional anesthesia, transversus abdominis plane, dexamethasone, ropivacaine.

Purpose This study compared and evaluated the efficacy of conventional low-tech and improvised high-tech alternative and augmentative communication (AAC) software in behavior management in the dental environment and oral hygiene activities performance of children with special health care needs as well as improving their communication skills with the dentist and caretakers. Methods A total of 60 institutionalized children with special health care needs were divided into two groups of 30 each to be exposed to low-tech AAC and high-tech AAC systems (special smiles for special children material). Assessment of knowledge as well as behavior modification achieved before and after training was carried out on the basis of pretested proformas formatted through various peer reviewed articles. Results and Conclusion Rapid and enhanced assimilation of knowledge was observed in group 2 exposed to high-tech AAC improvised software after intergroup comparison of total scores at baseline, first, second, third, sixth, and ninth month of training. Oral hygiene performance was compared using PHP (Patient Hygiene Performance) index and after training results revealed highly significant change in both groups. The subjects benefitted immensely from the programme as group 1 and group 2 children demonstrated good behavior after training compared to none at baseline. On the whole, this programme had a positive motivational impact.

Aim: The aim of this study was to investigate the remineralization potential of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on enamel eroded by cola drinks. Subjects and Methods: A total of 30 healthy subjects were selected from a random sample of 1200 children and divided into two groups of 15 each wherein calcium and phosphorus analyses and scanning electron microscope (SEM) analysis was carried out to investigate the remineralization of enamel surface. A total of 30 non-carious premolar teeth were selected from the human tooth bank (HTB) to prepare the in-situ appliance. Three enamel slabs were prepared from the same. One enamel slab was used to obtain baseline values and the other two were embedded into the upper palatal appliances prepared on the subjects’ maxillary working model. The subjects wore the appliance after which 30 ml cola drink exposure was given. After 15 days, the slabs were removed and subjected to respective analysis. Statistical Analysis Used: Means of all the readings of soluble calcium and phosphorous levels at baseline,post cola-drink exposure and post cpp-acp application were subjected to statistical analysis SPSS11.5 version. Comparison within groups and between groups was carried out using ANOVA and F-values at 1% level of significance. Results: Decrease in calcium solubility of enamel in the CPP-ACP application group as compared to post-cola drink exposure group (P < 0.05) was seen. Distinctive change in surface topography of enamel in the post-CPP-ACP application group as compared to post-cola drink exposure group was observed. Conclusion: CPP-ACP significantly promoted remineralization of enamel eroded by cola drinks as revealed by significant morphological changes seen in SEM magnification and spectrophotometric analyses.

BACKGROUND: There is no standard technique to monitor impact absorption capability of mouthguards. Earlier investigations have established that strain transferred to the teeth through mouthguard is a good indication of their efficiency. In the present study, a unique experimental scheme utilizing fiber Bragg gratings (FBGs) as distributed strain sensors is proposed and investigated to estimate impact absorption capability of custom-made mouthguard. The proposed methodology is useful due to advantages such as, very small size and flexibility for ease of bonding, self-referencing, and multiplexing capability of using FBG sensors. MATERIAL AND METHODS: Finite-element analysis was performed to simulate the stress distribution due to impact on the mouthguard. The FBGs were fabricated by exposing the core of photosensitive fiber to intense Ultra-Violet light through a 'phase mask'. One FBG sensor was bonded on the jaw model and another on the mouthguard surface at similar positions, so that both gratings are simultaneously affected by impact. Two different sets of the sensors were used, one for the anterior region and another for posterior region. The impact was produced using customized pendulum device with interchangeable impact objects i.e. cricket ball, hockey ball, and steel ball. Response of gratings was monitored using optical spectrum analyzer and strain induced due to each impact was determined from the Bragg wavelength shifts for each grating. RESULTS AND CONCLUSIONS: Strain induced due to impact was calculated from the Bragg wavelength shifts. Difference in the strain values for the two gratings is interpreted as impact energy absorbed by the mouthguard. The Bragg wavelength shifts (induced strain) for FBG bonded on the jaw model was much lower than the shift for FBG bonded on the mouthguard, indicating that most of the impact energy is absorbed by the mouthguard.

Dentine Dysplasia is a rare genetic condition. The treatment options and dilemmas associated with the condition remain undiscovered so far. This article highlights the variations in traits and challenges faced in the treatment of the cases.

Nasopharyngeal obstruction by adenoid enlargement is one of the main causes of mouth breathing. Cephalometric radiographs and rhinomanometric tests to evaluate nasal obstruction have been available for several decades. Various lines and areas have been interpreted by number of investigators to implicate the enlarged adenoid in a casual relationship with mouth breathing and the subsequent effect on vertical facial growth. The aim of this paper is to review lateral cephalometric tracing methods combined with newer Auto-cad surface area measurement program so that assessment of the nasopharyngeal free airway space can be done based on it, before more rigorous ear-nose-throat follow up is needed for the patient.

This study compared and evaluated the efficacy of conventional low-tech and improvised high-tech alternative and augmentative communication (AAC) software in behavior management in the dental environment and oral hygiene activities performance of children with special health care needs as well as improving their communication skills with the dentist and caretakers.A total of 60 institutionalized children with special health care needs were divided into two groups of 30 each to be exposed to low-tech AAC and high-tech AAC systems (special smiles for special children material). Assessment of knowledge as well as behavior modification achieved before and after training was carried out on the basis of pretested proformas formatted through various peer reviewed articles.Rapid and enhanced assimilation of knowledge was observed in group 2 exposed to high-tech AAC improvised software after intergroup comparison of total scores at baseline, first, second, third, sixth, and ninth month of training. Oral hygiene performance was compared using PHP (Patient Hygiene Performance) index and after training results revealed highly significant change in both groups. The subjects benefitted immensely from the programme as group 1 and group 2 children demonstrated good behavior after training compared to none at baseline. On the whole, this programme had a positive motivational impact.

Prevention of orofacial injuries is one of the biggest pre-occupations in sports dentistry. The custom-fitted mouthguard is considered the best choice for fit and protection when compared to over-the-counter commercial mouthguards. However, cost and time prohibit their mass production. It is therefore imperative to have an over-the-counter true mouth-formed mouthguard with comparable properties. The present in vitro experimental study was carried out to compare the shock absorption ability of EVA laminate mouthguards with self-adapting polyolefin material mouthguards in three different anterior teeth alignments.Finite element analysis (FEA) was performed to simulate the stress distribution due to impact on the respective mouthguards. Customized pendulum device with three interchangeable standard size impact objects was used. Response of grating was monitored using a FBG interrogation system. Shift in wavelength for each impact was measured. Three standardized jaw models were subjected to a total of 72 impact strikes with three different balls on two specified sites by releasing the objects from two different heights H1 24 cm and H2 48 cm.Two-way ANOVA was applied and comparative values computed. It was found that the percentage shock absorption ability of self-adapted polyolefin mouthguard was highly significant at0.001 level in both regions. The influence of height on the shock absorption ability of both mouthguards was highly significant at P0.001. It was concluded that self-adapting polyolefin mouthguards fulfill similar protection requirement as custom-fit mouthguards and can be used for millions of athletes if properly fitted chairside by a dentist without requiring laboratory fabrication.

Background: Considering the biological concerns of calcium hydroxide (CH) as a pulpotomy agent, an alternative silicate based dentin substitute i.e. Biodentine (Ca3SiO5) was evaluated clinically and radiographically. Aims: To evaluate the effectiveness of dentin substitute (Biodentine) in regenerative pulpotomy of vital primary teeth that would giv a biological base to its use in forming reactive dentin bridge and overcoming the drawbacks of calcium hydroxide. Material and Methods: Randomised clinical trial on 40 bilateral carious primary molars in 20 participant children (aged 5-10 years) was carried out by same operator using Ca3SiO5(group-1) and CH (group-2) as vital pulpotomy agents. Blinded clinical and radiographic outcomes were observed at 3, 6 and 12 months interval. Results: Clinical outcomes of both protocols were analysed using Pearson's chi-square test applied at P < 0.05. Descriptive statistics were expressed as mean increase in dentin bridge formation in mms from two reference points in standardized radiographs using paired 't'- test at baseline and 12 months and found to be statistically significant (P < 0.05) in group-1 when compared with group-2. Conclusion: Group-1 revealed statistically favourable regenerative potential along with clinical success compared to group 2 thereby sharing both indications and mode of action with CH, but without its drawbacks of physical and clinical properties.

PURPOSE: The majority of orofacial injuries affect the upper jaw, with the maxillary incisors being most prone to injury, often accounting for as many as 80% of all cases. Children with malocclusion in the anterior segment of the maxilla are more prone to traumatic injuries than those exhibiting normal occlusion, because most often the damaging force impacts directly against the maxillary anterior teeth. Hence, because of the difference of dissipation of the impact force because of the presence or absence of malocclusion, the mouthguard's shock absorption capacity would be influenced by certain factors. In the present study, a unique in vitro experiment utilizing fiber Bragg Grating (FBG) as distributed strain sensors was carried out to evaluate the shock absorption ability of laminate customized mouthguards in two different malocclusions compared with normal occlusion. MATERIAL AND METHODS: The impact was produced using a customized pendulum device with three interchangeable impact objects on typhodont models with two different malocclusions and normal occlusion from different heights. Response of gratings was monitored using an optical spectrum analyzer. Strain induced because each impact was determined from the Bragg's wavelength shifts for each grating. For every model, 12 impact strikes were measured using three different impact objects on the two specified sites by releasing the object from two different heights. RESULTS AND CONCLUSIONS: The laminated mouthguards showed significant variation in shock absorption ability when different malocclusions were compared. Hence, modifications in the original design of the laminated mouthguards should be considered for athletic competitors with malocclusion to provide adequate protection against impact. FBG sensor has shown the unique advantage of high sensitivity to strain measurement and can be used in further studies. The height of the impact is an important variable in determining the shock absorption ability of mouthguards. Language: en

There is no standard technique to monitor impact absorption capability of mouthguards. Earlier investigations have established that strain transferred to the teeth through mouthguard is a good indication of their efficiency. In the present study, a unique experimental scheme utilizing fiber Bragg gratings (FBGs) as distributed strain sensors is proposed and investigated to estimate impact absorption capability of custom-made mouthguard. The proposed methodology is useful due to advantages such as, very small size and flexibility for ease of bonding, self-referencing, and multiplexing capability of using FBG sensors.Finite-element analysis was performed to simulate the stress distribution due to impact on the mouthguard. The FBGs were fabricated by exposing the core of photosensitive fiber to intense Ultra-Violet light through a 'phase mask'. One FBG sensor was bonded on the jaw model and another on the mouthguard surface at similar positions, so that both gratings are simultaneously affected by impact. Two different sets of the sensors were used, one for the anterior region and another for posterior region. The impact was produced using customized pendulum device with interchangeable impact objects i.e. cricket ball, hockey ball, and steel ball. Response of gratings was monitored using optical spectrum analyzer and strain induced due to each impact was determined from the Bragg wavelength shifts for each grating.Strain induced due to impact was calculated from the Bragg wavelength shifts. Difference in the strain values for the two gratings is interpreted as impact energy absorbed by the mouthguard. The Bragg wavelength shifts (induced strain) for FBG bonded on the jaw model was much lower than the shift for FBG bonded on the mouthguard, indicating that most of the impact energy is absorbed by the mouthguard.