Search

Measuring personal exposure to flame retardants (FRs) is crucial for assessing and controlling human health risks posed by FRs during the recycling of electronic waste (e-waste) and end-of-life vehicles (ELVs). Here, we examined the use of handwipes and silicone wristbands to measure personal FR exposure for e-waste and ELV recycling workers and their children in Vietnam. On the handwipes from the e-waste recycling workers, the predominant five FRs detected were TBBPA (median concentration: 3700 ng/wipe), BDE-209 (1700 ng/wipe), TPHP (500 ng/wipe), DBDPE (410 ng/wipe), and BPA-BDPP (360 ng/wipe). On the handwipes from ELV recycling workers, TPHP (60 ng/wipe), IPPDPP (47 ng/wipe), BIPPPP/DIPPDPP (33 ng/wipe), BDE-209 (26 ng/wipe), and TCIPP (23 ng/wipe) were detected as the five predominant FRs. On the wristbands from the e-waste recycling workers, the five predominant FRs detected were TBBPA (median concentration: 340 ng/g), BDE-209 (330 ng/g), DBDPE (65 ng/g), TPHP (50 ng/g), and TMPP (34 ng/g). On the wristbands from the ELV recycling workers, TPHP (34 ng/g), IPPDPP (18 ng/g), TCIPP (14 ng/g), TDMPP (13 ng/g), BIPPPP/DIPPDPP (9.3 ng/g) and TMPP (9.3 ng/g) were detected as the predominant FRs. The data obtained with the wristbands were comparable to those obtained with the handwipes. Similar FR profiles were found in between the workers and their children. The profiles indicate that the informal e-waste and ELV recycling caused FR exposure not only for workers but also for their children who live in the workshops. By using the handwipe and wristband sampling approaches, we determined types and concentrations of FRs to which the workers and their children were dominantly exposed. Silicone wristband- and handwipe-based assessment is expected to be effective means of measuring personal FR exposure for the informal e-waste and ELV recycling workers and their children.

Plastic pollution has become one of the most pressing environmental issues. Recycling is a potential means of reducing plastic pollution in the environment. However, plastic fragments are still likely released to the aquatic environment during mechanical recycling processes. Here, we examined the plastic inputs and effluent outputs of three mechanical recycling facilities in Vietnam dealing with electronic, bottle, and household plastic waste, and we found that large quantities of microplastics (plastics5 mm in length) are generated and released to the aquatic environment during mechanical recycling without proper treatment. Comparisons with literature data for microplastics in wastewater treatment plant effluents and surface water indicated that mechanical recycling of plastic waste is likely a major point source of microplastics pollution. Although there is a mismatch between the size of the microplastics examined in the present study and the predicted no-effect concentration reported, it is still possible that microplastics generated at facilities pose risks to the aquatic environment because there might be many plastic particulates smaller than 315 μm, as suggested by our obtained size distributions. With mechanical recycling likely to increase as we move to a circular plastics economy, greater microplastics emissions can be expected. It is therefore an urgent need to fully understand not only the scale of microplastic generation and release from plastic mechanical recycling but also the environmental risk posed by microplastics in the aquatic environment.

Flame retardants (FRs) from electronic waste (e-waste) are a widespread environmental concern. In our study, in vitro physiologically based extraction tests (PBETs) for FRs were conducted in three different areas where dust remained after processing of e-waste to identify the bioaccessible FRs and quantify their bioaccessibilities of gastrointestinal tract for human as well as to assess the exposure via ingestion of workers in e-waste processing workshops. All 36 FRs were measured and detected in indoor dusts. Among the FRs, the mean concentrations of polybrominated diphenyl ethers (PBDEs) in the floor dust and settled dust were highest, 65,000 ng/g, and 31,000 ng/g, respectively. In contrast, phosphorus-containing flame retardants (PFRs) presented the highest mean concentration in the workplace dust samples, 64,000 ng/g. However, the highest bioaccessible concentrations in workplace dust, floor dust, and settled dust were observed for PFRs: 5900, 1600, and 680 ng/g, respectively. This study revealed that the higher bioaccessibility of PFRs versus other compounds was related to the negative correlation between FR concentrations and log KOW (hydrophobicity) values. The fact that hazard indices calculated using measured bioaccessibilities were less than 1 suggested that the non-cancer risk to human health by the FRs exposure via dust ingestion might be low.

In developing countries, inappropriate recycling of e-waste has resulted in the environmental release of toxicants, including heavy metals, that may have deleterious health effects. In this study, we estimated daily metal intakes in five households in a Vietnamese village located in an e-waste processing area and assessed the health risk posed by exposure to the metals. Garden soil, floor dust, 24-h duplicate diet, and ambient air samples were collected from five households in northern Vietnam in January 2014. All samples were acid-digested, and contents of Cd, Cu, Mn, Pb, Sb, and Zn were measured by using ICP mass spectrometry and ICP atomic emission spectroscopy. In addition, the soil, dust, and diet samples were subjected to an bioaccessibility extraction test to determine bioaccessible metal concentrations. Hazard quotients were estimated from bioaccessible metal concentrations, provisional tolerable weekly intakes, and reference doses. Garden soil and floor dust were estimated to be mainly contributors to daily Pb intake, as indicated by calculations using bioaccessible metal concentrations and the U.S. Environmental Protection Agency soil plus dust ingestion rate. Diet was suggested to contribute significantly to daily Cd, Cu, Mn, Sb, and Zn intake. Estimated metal exposures via inhalation were negligible, as indicated by calculations using International Atomic Energy Agency reference inhalation rates. The maximum hazard quotients were calculated as 0.2 (Cd), 0.09 (Cu), 0.3 (Mn), 0.6 (Pb), 0.2 (Sb), and 0.5 (Zn), on the basis of bioaccessible metal concentrations. The contributions of Cd, Cu, Mn, Sb, and Zn except Pb to potential noncancer risk for adult residents of the five households in the e-waste processing area may be low.

Inappropriate e-waste-processing operation is a serious issue in developing countries since the early 2000's. Field research was conducted to clarify its influences and diffuse toxic substances in the environment at e-waste-processing sites in a village in northern Vietnam from 2012 to 2014. We investigated surface soil samples collected from e-waste-processing sites, open burning sites, and rice paddy sites. Sediment samples and water samples were also collected from a river that runs through the village. The hazardous metal concentration in soil and river sediment samples indicated that 7 elements (Ca, Cu, Mo, Ni, Pb, Sn, and Zn) had high concentrations as a result of e-waste-processing. Most notably, Pb and Cu had high concentrations in soil samples (Pb: 26–2200 mg/kg, Cu: 22–3000 mg/kg). The results of a multivariate analysis indicated that these 7 elements were closely correlated with e-waste-processing. Concentrations of hazardous metals showed an upward trend where e-waste-processing occurred during the 3-year study period, although it was not significant statistically at present. Open burning activity had a great influence on Cu accumulation, and maximum Cu concentrations increased from 340 mg/kg in 2012–3000 mg/kg in 2014 in soil samples from open-burning sites. There were large differences in the dominant hazardous metal depending on the type of e-waste-processing workshop because hazardous metal composition was influenced by the types of e-waste and the processing procedures. It is necessary to avoid e-waste processing in open-air environment to control emissions of hazardous substances. Especially, open burning should be prohibited. Keywords: E-waste-processing, Open burning, Soil pollution, Hazardous metal

We investigated the concentrations of polybrominated diphenyl ethers (PBDEs) and alternative flame retardants (FRs) in environmental samples collected in January 2012, 2013, and 2014 from an electronic waste-processing area in northern Vietnam. During the study period, PBDE and alternative FR concentrations in soils around the electronic waste-processing workshops ranged from 37 to 9200 ng g −1 dry weight (dw) and from 35 to 24,000 ng g −1 dw; the concentrations in soils around the open-burning sites ranged from 1.6 to 62 ng g −1 dw and from −1 dw; and the concentrations in river sediments around the workshops ranged from 100 to 3800 ng g −1 dw and from 23 to 6800 ng g −1 dw, respectively. Over the course of study period, we observed significant decreases in concentrations of PBDEs and significant increases in concentrations of alternative FRs, particularly Dechlorane Plus isomers and oligomeric organophosphorus FRs ( o -PFRs) in both soils and sediments around the workshops. We also report information on concentrations and environmental emissions of o -PFRs and their low-molecular-weight impurities in the same soils and sediments. The detection of o -PFR impurities around the workshops and the open-burning sites highlights an enhanced breakdown of o -PFRs probably due to weathering during open storage and high temperature attained during the burning of electronic wastes.

Although bioaccessibility testing is applied worldwide for appropriate chemical risk assessment, few studies have focused on the bioaccessibility of flame retardants (FRs), especially inhalation exposure. This study assessed inhalation exposure to FRs in indoor dust by workers at e-waste-dismantling workshops in northern Vietnam, by using modified simulated epithelial lung fluid (SELF) and artificial lysosomal fluid (ALF). The average mass concentrations of FRs were 130,000 ng/g for workplace dust (n = 3), 140,000 ng/g for floor dust (n = 3), and 74,000 ng/g for settled dust (n = 2), whereas the average bioaccessible concentrations of FRs were 1900, 1400, and 270 ng/g in the SELF condition and 2600, 770, and 490 ng/g in the ALF condition, respectively. Results clearly indicate that the bioaccessible concentrations of FRs are markedly lower than their mass concentrations. Tris(2-chloroethyl) phosphate (TCEP, ~19%), tris(2-chloroisopropyl) phosphate (TCIPP, ~35%), and tris(1,3-dichloroisopropyl) phosphate (TDCIPP, ~22%) showed comparably high bioaccessibility in both SELF and ALF conditions. In contrast, the bioaccessibility of tetrabromobisphenol A (TBBPA, ~20%) was high in the SELF condition, but not in the ALF condition. With regard to the test compounds' physicochemical properties, the inhalation bioaccessibility of FRs in both conditions increased as molecular weight or octanol–water partition coefficient decreased, and it decreased as water solubility decreased. Health risk assessment clearly indicated that the hazard quotient of FRs via inhalation exposure for workers in the e-waste-dismantling workshops was less than 1, suggesting that the inhalation exposure to FRs during indoor dismantling of e-waste at this site was negligible based on the current methodology of non-cancer health risk assessment used in this study.

A novel system of mercury-free anodic stripping voltammetry with a disposable cartridge has been developed for on-site lead measurements to evaluate the environmental safety of secondary materials such as municipal solid waste (MSW) molten slag. The cartridge consists of two key components: a cation-exchange membrane for preconcentration–separation of lead, and carbon and Ag/AgCl electrodes for measurement. The dynamic range of the proposed method was 0.5–10 μg L − 1 with a detection limit (S/N = 3) of 0.15 μg L − 1 . The reproducibility of the method was satisfactory with a relative standard deviation of 3.6% ( n = 7) for 5 μg L − 1 lead (II). Interference from Cu(II) was suppressed by adding 5, 10, 15, 20-tetrakis ( N -methylpyridium-4-yl)-21H, 23H-porphine to the sample solutions. The present method was successfully applied to the determination of lead in water-leaching and 1 mol L − 1 HCl-extracted solutions from MSW molten slag. This method is useful for quality control of MSW molten slag in a manufacturing setting.

To identify the important soil components involved in 2,4-dichlorophenoxyacetic acid (2,4-D) adsorption on Andosols, 2,4-D adsorption on a surface horizon of an Andosol was compared with that on hydrogen peroxide (H2O2)-treated (soil organic matter [SOM] was removed), acid-oxalate (OX)-treated (active metal hydroxides and SOM were removed), and dithionite-citrate-bicarbonate (DCB)-treated (free and active metal [hydr]oxides and SOM were removed) soil samples at equilibrium pHs ranging from 4 to 8. Although the untreated soil contained a large amount of organic C (71.9 g kg-1), removal of SOM had little effect on 2,4-D adsorption. Active surface hydroxyls, which were attached to the active and free metal (hydr)oxides and metal SOM complexes, were identified as the most important soil functional group for 2,4-D adsorption. The dominant mechanism of the 2,4-D adsorption was a ligand exchange reaction in which the carboxylic group of 2,4-D displaced the active surface hydroxyl associated with metals and formed a strong coordination bond between the 2,4-D molecule and soil solid phase. The ligand exchange reaction reasonably accounted for the selective adsorption of 2,4-D over Cl-, competitive adsorption of phosphate over 2,4-D, reduction in plant-growth-inhibitory activity of soil-adsorbed 2,4-D, and the high 2,4-D adsorption ability of Andosols. Although a humic acid purified from the soil did not adsorb 2,4-D, the presence of the humic acid increased 2,4-D adsorption on Al and Fe, probably by inhibiting the hydrolysis and polymerization of Al and Fe resulting in the preservation of available adsorption sites on these metals. The adsorption behavior of 2,4-D on soils could be a good index for predicting the adsorption behavior of other organic acids in soils.

Effects of soil organic matter (80M) on P sorption of soils still remain to be clarified because contradictory results have been reported in the literature. In the present study, pH-dependent P sorption on an allophanic Andisol and an alluvial soil was compared with that on hydrogen peroxide (H202)-treated, acid-oxalate (OX)-treated, and dithionite-citrate- bicarbonate (DCB)-treated soils. Removal of 80M increased or decreased P sorption depending on the equilibrium pH values and soil types. In the H2O2 OX-, and DCB-treated soils, P sorption was pH-dependent, but this trend was not conspicuous in the untreated soils. It is likely that 80M affects P sorption of soils through three factors, competitive sorption, inhibition of polymerization and crystallization of metals such as AI and Fe, and flexible structure of metal-80M complexes. As a result, the number of available sites for P sorption would remain relatively constant in the wide range of equilibrium pH values in the presence of 80M. The P so...

The management of electronic waste (e-waste), which can be a source of both useful materials and toxic substances, depending on the processing method, is important for promoting material cycling. In this study, we used the dioxin-responsive chemical-activated luciferase gene expression (DR-CALUX) assay combined with gas chromatography–high-resolution mass spectrometry to evaluate the levels of dioxin-like compounds in surface soils and river sediments collected in and around an e-waste-processing village in northern Vietnam. The WHO-TEQs (Toxic equivalents) of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (Co-PCBs), and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in soils collected in January 2012 ranged from 0.29 to 310 pg/g (median 2.9 pg/g, n = 32), and the WHO-TEQs in sediments ranged from 0.96 to 58 pg/g (median 4.4 pg/g, n = 8). Dioxin-like activities (CALUX-TEQs [2,3,7,8-TCDD equivalent]) in soils collected in January 2012, 2013, and 2014 ranged from