Search

Change detection analyses of aeolian bedforms (dunes and ripples), using multitemporal images acquired by the Mars Reconnaissance Orbiter High Resolution Imaging Science Experiment (HiRISE), can reveal migration of bedforms on Mars. Here we investigated bedform mobility (evidence of wind-driven migration or activity), from analysis of HiRISE temporal image pairs, and dune field modification (i.e., apparent presence/lack of changes or degradation due to nonaeolian processes) through use of a dune stability index or SI (1–6; higher numbers indicating increasing evidence of stability/modification). Combining mobility data and SI for 70 dune fields south of 40°S latitude, we observed a clear trend of decreasing bedformmobility with increasing SI and latitude. Both dunes and ripples were more commonly active at lower latitudes, although some high-latitude ripples are migrating. Most dune fields with lower SIs (≤3) were found to be active while those with higher SIs were primarily found to be inactive. A shift in prevalence of active to apparently inactive bedforms and to dune fields with SI ≥ 2 occurs at ~60°S latitude, coincident with the edge of high concentrations ofH2O-equivalent hydrogen observed by the Mars Odyssey Neutron Spectrometer. This result is consistent with previous studies suggesting that stabilizing agents, such as ground ice, likely stabilize bedforms and limit sediment availability. Observations of active dune fields with morphologies indicative of stability (i.e., migrating ripples in SI = 3 dune fields) may have implications for episodic phases of reworking or dune building, and possibly geologically recent activation or stabilization corresponding to shifts in climate.

Windblown sand and dust dominate surface geologic processes in Mars’ current environment. Besides sand dune fields, areally extensive sand sheets are common across Mars, blanketing the underlying topography with several meters of rippled sand. Earth’s sand sheets commonly form upwind or cross-wind to dunes and both partially trap and source sediment to downwind dunes. In contrast, Mars’ sheets are frequently located downwind of active barchan and dome sand dunes, suggesting they cannot be a sediment source for the dunes as on Earth. Here, we characterize a Martian sand sheet and its geologic context, model the regional atmospheric circulation, and more broadly consider the implications for sand sheet formation on Mars. Our case study sand sheet in central Herschel Crater is

During its ascent up Mount Sharp, the Mars Science Laboratory Curiosity rover traversed the Bagnold Dune Field. We model sand modal mineralogy and grain size at four locations near the rover traverse, using orbital shortwave infrared single-scattering albedo spectra and a Markov chain Monte Carlo implementation of Hapke's radiative transfer theory to fully constrain uncertainties and permitted solutions. These predictions, evaluated against in situ measurements at one site from the Curiosity rover, show that X-ray diffraction-measured mineralogy of the basaltic sands is within the 95% confidence interval of model predictions. However, predictions are relatively insensitive to grain size and are nonunique, especially when modeling the composition of minerals with solid solutions. We find an overall basaltic mineralogy and show subtle spatial variations in composition in and around the Bagnold Dunes, consistent with a mafic enrichment of sands with cumulative aeolian-transport distance by sorting of olivine, pyroxene, and plagioclase grains. Furthermore, the large variations in Fe and Mg abundances (~20 wt %) at the Bagnold Dunes suggest that compositional variability may be enhanced by local mixing of well-sorted sand with proximal sand sources. Our estimates demonstrate a method for orbital quantification of composition with rigorous uncertainty determination and provide key constraints for interpreting in situ measurements of compositional variability within Martian aeolian sandstones.

The first in situ investigation of an active dune field on another planetary surface occurred in 2015-2016 when the MSL Curiosity rover investigated the Bagnold Dunes on Mars. HIRISE images show clear seasonal variations that are in good agreement with atmospheric model predictions of intra-annual sand flux and migration directions that together indicate that the campaign occurred during a period of low wind activity. Curiosity surface images show that limited changes nevertheless occurred, with movement of large grains, particularly on freshly exposed surfaces, two occurrences of secondary grain flow on the slip face of Namib Dune, and a slump on a freshly exposed surface of a large ripple. These changes are seen at sol-to-sol time scales. Grains on a rippled sand deposit and unconsolidated dump piles show limited movement of large grains over a few hours during which mean friction speeds are estimated at 0.3 - 0.4 m s-1. Overall, the correlation between changes and peak REMS winds is moderate, with high wind events associated with changes in some cases, but not in others, suggesting that other factors are also at work. The distribution of REMS 1 Hz wind speeds show a tail up to the 20 m s-1, showing that even higher speed winds occur. Non-aeolian triggering mechanisms are also possible. The low activity period at the dunes documented by Curiosity provides clues to processes that dominated in the Martian past under conditions of lower obliquity.

A high density of REMS wind measurements were collected in three science investigations during MSL’s Bagnold Dunes Campaign, which took place over ~80 sols around southern winter solstice (Ls~90°) and constituted the first in situ analysis of the environmental conditions, morphology, structure, and composition of an active dune field on Mars. The Wind Characterization Investigation was designed to Available online 14 December 2016 fully characterize the near-surface wind field just outside the dunes and confirmed the primarily upslope/downslope flow expected from theory and modeling of the circulation on the slopes of Aeolis Mons in this season. The basic pattern of winds is ‘upslope’ (from the northwest, heading up Aeolis Mons) during the daytime (~09:00–17:00 or 18:00) and ‘downslope’ (from the southeast, heading down Aeolis Mons) at night (~20:00 to some time before 08:00). Between these times the wind rotates largely clockwise, giving generally westerly winds mid-morning and easterly winds in the early evening. The timings of these direction changes are relatively consistent from sol to sol; however, the wind direction and speed at any given time shows considerable intersol variability. This pattern and timing is similar to predictions from the MarsWRF numerical model, run at a resolution of ~490 m in this region, although the model predicts the upslope winds to have a stronger component from the E than the W, misses a wind speed peak at ~09:00, and under-predicts the strength of daytime wind speeds by ~2–4 m/s. The Namib Dune Lee Investigation reveals ‘blocking’ of northerly winds by the dune, leaving primarily a westerly component to the daytime winds, and also shows a broadening of the 1 Hz wind speed distribution likely associated with lee turbulence. The Namib Dune Side Investigation measured primarily daytime winds at the side of the same dune, in support of aeolian change detection experiments designed to put limits on the saltation threshold, and also appears to show the influence of the dune body on the local flow, though less clearly than in the lee. Using a vertical grid with lower resolution near the surface reduces the relative strength of nighttime winds predicted by MarsWRF and produces a peak in wind speed at ~09:00, improving the match to the observed diurnal variation of wind speed, albeit with an offset in magnitude. The annual wind field predicted using this grid also provides a far better match to observations of aeolian dune morphology and motion in the Bagnold Dunes. However, the lower overall wind speeds than observed and disagreement with the observed wind direction at ~09:00 suggest that the problem has not been solved and that alternative boundary layer mixing schemes should be explored which may result in more mixing of momentum down to the near-surface from higher layers. These results demonstrate a strong need for in situ wind data to constrain the setup and assumptions used in numerical models, so that they may be used with more confidence to predict the circulation at other times and locations on Mars.

The transport and deposition of sand is the most prevalent agent of landscape modification on Mars today, with fluxes comparable to some sand dunes on Earth. Until now, the relationship between sand flux and dune field morphology has been poorly constrained. By tracking dune movement over ∼10 km-long dune fields in Herschel Crater and Nili Patera, representative of many dune fields on Mars, we find a downwind flux decrease that correlates with a sequence of changing morphology from barchans to barchanoids and seifs (longitudinal dunes) to isolated dome dunes and ending with sand sheets. We show empirical consistency with atmospheric Internal Boundary Layer (IBL) theory which can describe these broad flux and morphology changes in Martian dune fields. Deviations from IBL flux predictions are from wind streamline compressions up slopes, leading to a speedup effect. By establishing a dune field morphology type example and correlating it with measured and predicted flux changes, we provide an integrated morphology and flux model that can be applied to other areas of Mars and be used to infer paleo-environmental conditions from preserved sandstone.

The Curiosity rover observed high Mn abundances (>25 wt % MnO) in fracture-filling materials that crosscut sandstones in the Kimberley region of Gale crater, Mars. The correlation between Mn and trace metal abundances plus the lack of correlation between Mn and elements such as S, Cl, and C, reveals that these deposits are Mn oxides rather than evaporites or other salts. On Earth, environments that concentrate Mn and deposit Mn minerals require water and highly oxidizing conditions; hence, these findings suggest that similar processes occurred on Mars. Based on the strong association between Mn-oxide deposition and evolving atmospheric dioxygen levels on Earth, the presence of these Mn phases on Mars suggests that there was more abundant molecular oxygen within the atmosphere and some groundwaters of ancient Mars than in the present day.

Aerodynamic roughness heights of 1-3 cm were obtained from measured wind profiles collected among fields of gravel-mantled megaripples in the high desert of the Puna region of northwestern Argentina. Roughness height appears to be relatively insensitive to the angle at which the wind was incident upon the bedforms throughout the study sites. The results represent the first wind profiling measurements for large megaripples, but they also demonstrate the importance of a careful evaluation of many potential effects that can influence the utility of wind profiling data. The same effects that influence collection of fieldwork data must also be considered in any prediction of wind profiles anticipated to occur near Transverse Aeolian Ridges and other aeolian features on Mars that are intermediate in scale between wind ripples and small sand dunes. Fil: Zimbelman, J. R.. Smithsonian Institution; Estados Unidos Fil: Scheidt, S. P.. Smithsonian Institution; Estados Unidos. University of Arizona; Estados Unidos Fil: de Silva, S. L.. State University of Oregon; Estados Unidos Fil: Bridges, N. T.. University Johns Hopkins; Estados Unidos Fil: Spagnuolo, Mauro Gabriel. State University of Oregon; Estados Unidos. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Estudios Andinos "Don Pablo Groeber". Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Estudios Andinos "Don Pablo Groeber"; Argentina Fil: Neely, E. M.. State University of Oregon; Estados Unidos

An expression for saltation threshold – the minimum wind speed required to initially saltate particles – is necessary for modeling aeolian processes on Earth and other bodies. Analysis of a compilation of experimental data led to the conclusion that this threshold is a function of the ratio of the density of the particle to that of the entraining fluid (ρp/ρ), and to a curve for the dimensionless threshold parameter, A(ρp/ρ). Whereas data of low-density ratio and of high-density ratio conditions show constant A values, the single dataset used to define the transitional region of the curve shows a range of values. To revisit this transitional region, we collect new freestream threshold data at 1–20 bars (1–20 × 105 Pa) with particles 150–1000 µm in diameter and having densities 400–3300 kg/m3 using the Titan Wind Tunnel. From these new data spanning a range of intermediate density ratios, we calculate friction wind speeds and values for A(ρp/ρ). We filter our threshold data for the same conditions (particle diameter > 200 µm, particle Reynolds number > 10) as in previous work and combine them with previously published data to derive a new density ratio curve with the same form as the previous expression. This new curve of A(ρp/ρ), with different parameter values and including uncertainties, confirms the slope in the transitional region between low- and high-density ratios, though giving slightly higher values for A. This work offers improved prediction of threshold wind speeds under thicker-than-terrestrial atmospheres on other solar or extrasolar planets, while also suggesting current challenges to accurate experimental simulation of aeolian transport under such conditions.

The Bagnold dunes in Gale Crater, Mars, are the first active aeolian dune field explored in situ on another planet. The Curiosity rover visited the Bagnold dune field to understand modern winds, aeolian processes, rates, and structures; to determine dune material composition, provenance, and the extent and type of compositional sorting; and to collect knowledge that informs the interpretation of past aeolian processes that are preserved in the Martian sedimentary rock record. The Curiosity rover conducted a coordinated campaign of activities lasting 4 months, interspersed with other rover activities, and employing all of the rover's science instruments and several engineering capabilities. Described in 13 manuscripts and summarized here, the major findings of the Bagnold Dunes Campaign, Phase I, include the following: the characterization of and explanation for a distinctive, meter-scale size of sinuous aeolian bedform formed in the high kinetic viscosity regime of Mars' thin atmosphere; articulation and evaluation of a grain splash model that successfully explains the occurrence of saltation even at wind speeds below the fluid threshold; determination of the dune sands' basaltic mineralogy and crystal chemistry in comparison with other soils and sedimentary rocks; and characterization of chemically distinctive volatile reservoirs in sand-sized versus dust-sized fractions of Mars soil, including two volatile-bearing types of amorphous phases.

Aeolian processes occur throughout the Solar System and likely on extrasolar planets as well. Models based on data collected in boundary layer wind tunnels have contributed to understanding the physics of these processes. Planetary wind tunnels allow simulation of conditions (atmospheric pressure, density, or kinematic viscosity) on extraterrestrial bodies, and their use over several decades has demonstrated important differences between terrestrial and extraterrestrial aeolian processes. A high-pressure wind tunnel is now available in the Planetary Aeolian Laboratory (PAL) at the NASA Ames Research Center. Used up to the early 1990’s for Venus analog experiments, this wind tunnel has been refurbished and is now in use as the Titan Wind Tunnel (TWT) for Titan analog experiments. Initial results for threshold friction wind speeds at Titan analog conditions do not agree with models based on experimental data at terrestrial, Martian, and Venusian analog conditions (Burr et al., 2015). These results from the TWT work continue a history of wind tunnel experiments that show repeated under-prediction of threshold by models based on non-analog conditions. In addition to suggesting caution in extrapolating from one surface environment to another, this historical record highlights the utility of experiments in wind tunnels that provide closely analogous conditions to the environment of interest. The TWT, along with other PAL facilities, provides the means for further analog experiments by the scientific community to support continued advancement in understanding planetary aeolian processes.

Both wind and seasonal CO 2 ice sculpt the dunes of Mars in today’s climate. The High Resolution Imaging Science Experiment (HiRISE) on the Mars Reconnaissance Orbiter has returned extensive temporal coverage of changes on the north polar dunes for nearly four Mars years. The processes driving dune morphology changes such as the formation of new alcoves have been investigated. Considerable interannual variability has been observed. Most changes occur in the period of time when HiRISE cannot image: late summer and fall when light levels are too low to see subtle changes on the dunes and the polar hood obscures the surface, and winter when the cap is in polar night. This is consistent with seasonal control but does not allow us to directly differentiate between eolian processes vs. CO 2 ice as the driving agent for alcove formation. Circumstantial evidence and observations of analog processes in the southern mid-latitudes however implicates processes associated with frost emplacement and removal.

Surface compositional features on rocks such as coatings and weathering rinds provide important information about past aqueous environments and water–rock interactions. The search for these features represents an important aspect of the Curiosity rover mission. With its unique ability to do fine-scale chemical depth profiling, the ChemCam laser-induced breakdown spectroscopy instrument (LIBS) onboard Curiosity can be used to both identify and analyze rock surface alteration features. In this study we analyze a terrestrial manganese-rich rock varnish coating on a basalt rock in the laboratory with the ChemCam engineering model to determine the LIBS signature of a natural rock coating. Results show that there is a systematic decrease in peak heights for elements such as Mn that are abundant in the coating but not the rock. There is significant spatial variation in the relative abundance of coating elements detected by LIBS depending on where on the rock surface sampled; this is due to the variability in thickness and spatial discontinuities in the coating. Similar trends have been identified in some martian rock targets in ChemCam data, suggesting that these rocks may have coatings or weathering rinds on their surfaces.

Saltation threshold, the minimum wind speed for sediment transport, is a fundamental parameter in aeolian processes. The presence of liquid, such as water on Earth or methane on Titan, may affect the threshold values to a great extent. Sediment density is also crucial for determining threshold values. Here we provide quantitative data on density and water content of common wind tunnel materials that have been used to study conditions on Earth, Titan, Mars, and Venus. The measured density values for low density materials are higher compared to literature values, whereas for the high density materials, there is no such discrepancy. We also find that low density materials have much higher water content and longer atmospheric equilibration timescales compared to high density sediments. In the Titan Wind Tunnel, we performed threshold experiments with the standard walnut shells (125-150 \mu m, 7.2% water by mass) and dried walnut shells (1.7% water by mass). The threshold results for the two scenarios are almost the same, which indicates that humidity had a negligible effect on threshold for walnut shells in this experimental regime. When the water content is lower than 11.0%, the interparticle forces are dominated by adsorption forces, whereas at higher values the interparticle forces are dominated by much larger capillary forces. For materials with low equilibrium water content, like quartz sand, capillary forces dominate. When the interparticle forces are dominated by adsorption forces, the threshold does not increase with increasing relative humidity (RH). Only when the interparticle forces are dominated by capillary forces does the threshold start to increase with increasing RH/water content. Since tholins have a low methane content (0.3% at saturation, Curtis et al., 2008), we believe tholins would behave similarly to quartz sand when subjected to methane moisture. [abridged abstract], Comment: 45 pages, 11 figures

The Mars Science Laboratory rover Curiosity visited two active wind‐blown sand dunes within Gale crater, Mars, which provided the first ground‐based opportunity to compare Martian and terrestrial eolian dune sedimentary processes and study a modern analog for the Martian eolian rock record. Orbital and rover images of these dunes reveal terrestrial‐like and uniquely Martian processes. The presence of grainfall, grainflow, and impact ripples resembled terrestrial dunes. Impact ripples were present on all dune slopes and had a size and shape similar to their terrestrial counterpart. Grainfall and grainflow occurred on dune and large‐ripple lee slopes. Lee slopes were ~29° where grainflows were present and ~33° where grainfall was present. These slopes are interpreted as the dynamic and static angles of repose, respectively. Grain size measured on an undisturbed impact ripple ranges between 50 μm and 350 μm with an intermediate axis mean size of 113 μm (median: 103 μm). Dissimilar to dune eolian processes on Earth, large, meter‐scale ripples were present on all dune slopes. Large ripples had nearly symmetric to strongly asymmetric topographic profiles and heights ranging between 12 cm and 28 cm. The composite observations of the modern sedimentary processes highlight that the Martian eolian rock record is likely different from its terrestrial counterpart because of the large ripples, which are expected to engender a unique scale of cross stratification. More broadly, however, in the Bagnold Dune Field as on Earth, dune‐field pattern dynamics and basin‐scale boundary conditions will dictate the style and distribution of sedimentary processes., Key Points Impact ripples, grainfall, and grainflows occur on Martian dunes and are similar to terrestrial counterpartsUnique, meter‐scale large ripples are found on Martian dunes and would distinguish the Martian and terrestrial eolian rock recordsThe angle of repose on Martian dunes and large ripples is found to be around 29°, which is similar to that found on Earth

The Mars Science Laboratory Curiosity rover performed coordinated measurements to examine the textures and compositions of aeolian sands in the active Bagnold dune field. The Bagnold sands are rounded to subrounded, very fine to medium sized (~45–500 μm) with ≥6 distinct grain colors. In contrast to sands examined by Curiosity in a dust‐covered, inactive bedform called Rocknest and soils at other landing sites, Bagnold sands are darker, less red, better sorted, have fewer silt‐sized or smaller grains, and show no evidence for cohesion. Nevertheless, Bagnold mineralogy and Rocknest mineralogy are similar with plagioclase, olivine, and pyroxenes in similar proportions comprising >90% of crystalline phases, along with a substantial amorphous component (35% ± 15%). Yet Bagnold and Rocknest bulk chemistry differ. Bagnold sands are Si enriched relative to other soils at Gale crater, and H2O, S, and Cl are lower relative to all previously measured Martian soils and most Gale crater rocks. Mg, Ni, Fe, and Mn are enriched in the coarse‐sieved fraction of Bagnold sands, corroborated by visible/near‐infrared spectra that suggest enrichment of olivine. Collectively, patterns in major element chemistry and volatile release data indicate two distinctive volatile reservoirs in Martian soils: (1) amorphous components in the sand‐sized fraction (represented by Bagnold) that are Si‐enriched, hydroxylated alteration products and/or H2O‐ or OH‐bearing impact or volcanic glasses and (2) amorphous components in the fine fraction (, Key Points Because of ongoing aeolian activity, the Bagnold dunes consist of well‐sorted sands and lack the finer grains typical of Martian soilsDune sands are chemically distinct with elevated Si, Mg, and Ni and lower H2O, S, and Cl relative to all previously measured Martian finesTwo distinct, water‐/OH‐bearing amorphous components are identified: Fe‐, S‐, and Cl‐rich material in dust and Si‐rich material in the sands

To understand the origin of the dunes on Titan, it is important to investigate the material properties of Titan's organic sand particles on Titan. The organic sand may behave distinctively compared to the quartz/basaltic sand on terrestrial planets (Earth, Venus, Mars) due to differences in interparticle forces. We measured the surface energy (through contact angle measurements) and elastic modulus (through Atomic Force Microscopy, AFM) of the Titan aerosol analog (tholin). We find the surface energy of a tholin thin film is about 70.9 mN/m and its elastic modulus is about 3.0 GPa (similar to hard polymers like PMMA and polystyrene). For two 20 $\mu$m diameter particles, the theoretical cohesion force is therefore 3.3 $\mu$N. We directly measured interparticle forces for relevant materials: tholin particles are 0.8$\pm$0.6 $\mu$N, while the interparticle cohesion between walnut shell particles (a typical model materials for the Titan Wind Tunnel, TWT) is only 0.4$\pm$0.1 $\mu$N. The interparticle cohesion forces are much larger for tholins and presumably Titan sand particles than materials used in the TWT. This suggests we should increase the interparticle force in both analog experiments (TWT) and threshold models to correctly translate the results to real Titan conditions. The strong cohesion of tholins may also inform us how the small aerosol particles ($\sim$1 $\mu$m) in Titan's atmosphere are transformed into large sand particles ($\sim$200 $\mu$m). It may also support the cohesive sand formation mechanism suggested by Rubin and Hesp (2009), where only unidirectional wind is needed to form linear dunes on Titan., Comment: 8 figures

A suite of eight rocks analyzed by the Curiosity Rover while it was stopped at the Rocknest sand ripple shows the greatest chemical divergence of any potentially sedimentary rocks analyzed in the early part of the mission. Relative to average Martian soil and to the stratigraphically lower units encountered as part of the Yellowknife Bay formation, these rocks are significantly depleted in MgO, with a mean of 1.3 wt %, and high in Fe, averaging over 20 wt % FeO_T, with values between 15 and 26 wt % FeO_T. The variable iron and low magnesium and rock texture make it unlikely that these are igneous rocks. Rock surface textures range from rough to smooth, can be pitted or grooved, and show various degrees of wind erosion. Some rocks display poorly defined layering while others seem to show possible fractures. Narrow vertical voids are present in Rocknest 3, one of the rocks showing the strongest layering. Rocks in the vicinity of Rocknest may have undergone some diagenesis similar to other rocks in the Yellowknife Bay Formation as indicated by the presence of soluble calcium phases. The most reasonable scenario is that fine-grained sediments, potentially a mixture of feldspar-rich rocks from Bradbury Rise and normal Martian soil, were lithified together by an iron-rich cement.

Basalt physical properties such as compressive strength and density are directly linked to their chemistry and constitution; as weathering progresses, basalts gradually become weaker and transition from intact rock to saprolite and ultimately, to soil. Here we quantify the degree of weathering experienced by the Adirondack-class basalts at the Mars Exploration Rover Spirit site by performing comparative analyses on the strength and chemistry of a series of progressively weathered Columbia River Basalt (CRB) from western Idaho and eastern Washington. CRB samples were subjected to compressive strength tests, Rock Abrasion Tool grinds, neutron activation analysis, and inductively coupled plasma optical emission spectroscopy. Analyses of terrestrial basalts indicate linked strength-chemical changes, as expected. Weathering sufficient to induce the loss of more than 50% of some cations (including >50% of MgO and MnO as well as ∼38% of Fe2O3 and 34% of CaO) was observed to weaken these samples by as much as 50% of their original strength. In comparison with the terrestrial samples, Adirondack-class basalts are most similar to the weakest basalt samples measured in terms of compressive strength, yet they do not exhibit a commensurate amount of chemical alteration. Since fluvial and lacustrine activity in Gusev crater appears to have been limited after the emplacement of flood basalt lavas, the observed weakness is likely attributable to thin-film weathering on exposed, displaced rocks in the Gusev plains (in addition to some likely shock effects). The results indicate that Adirondack-class basalts may possess a several mm-thick weak outer rind encasing an interior that is more pristine than otherwise indicated, and also suggest that long rock residence times may be the norm.

We measure the wavelength of aeolian bedforms on the surface of martian volcanoes, spanning a 23 km range in elevation, or nearly an order of magnitude in atmospheric pressure and density. We find that the bedform wavelength (∼1–5 m) varies as the reciprocal of density. The observed wavelengths and wavelength dependence are compared with three recent models of bedform spacing. The results are consistent with the expected increase in threshold friction speed and saturation drag length with elevation. The observations lend support to the expectation that such bedforms on Venus or Titan are too small to be observed in present data.

[1] We have assessed the characteristics of clasts along Curiosity's traverse to shed light on the processes important in the genesis, modification, and transportation of surface materials. Pebble- to cobble-sized clasts at Bradbury Landing, and subsequently along Curiosity's traverse to Yellowknife Bay, reflect a mixing of two end-member transport mechanisms. The general clast population likely represents material deposited via impact processes, including meteorite fragments, ejecta from distant craters, and impactites consisting of shocked and shock-melted materials from within Gale Crater, which resulted predominantly in larger, angular clasts. A subset of rounded pebble-sized clasts has likely been modified by intermittent alluvial or fluvial processes. The morphology of this rounded clast population indicates that water was a more important transporting agent here than at other Mars sites that have been studied in situ. Finally, we identified populations of basalt clasts and porphyritic clasts of undetermined composition by their morphologic and textural characteristics; basalts are confirmed by geochemical data provided by ChemCam.

Gravel “megaripples” in the Puna of Argentina are the most extreme aeolian megaripples on Earth and are useful analogs for aeolian processes on Mars. Field observations, supplemented by experimental and numerical constraints on wind characteristics and aeolian transport, reveal their conditions of formation and growth to be an aeolian geomorphology “perfect storm.” The bedforms are formed on a substrate of weakly indurated ignimbrite, aeolian deflation of which yields a bimodal lag of lithics and pumice clasts onto an undulating surface. Under normal wind conditions in this region, the lithics are organized into bedforms on local upslopes and “highs” through creep induced by the impact of saltating sand and pumice. The gravel bedforms grow through “shadowing” and trap sand and silt that is gradually kinetically sieved down to “lift” the gravel mantle upwards to form the megaripples. These observations connote that the largest features are not ripples in the sense of migrating bedforms, but rather nucleation sites of wind-transported sediment. Strong control by bedrock topography means that the largest bedform wavelengths are not a result of particle trajectories, and this complicates their comparison with other ripples and may require a new classification. Of relevance to Mars, the Puna megaripples are morphologically and contextually similar to small ripple-like transverse aeolian ridges (TARs). Moreover, the Puna gravels have similar equivalent weight ( mg ) to those composing granule ripples at Meridiani Planum, and their local origin may have implications for the origin of sediment in martian aeolian bedforms. Finally, the stable yet dynamic character of the Puna megaripples could help reconcile current models of TARs with periodic bedrock ridges that may be produced by aeolian erosion.

[1] Each Mars Exploration Rover carries a Rock Abrasion Tool (RAT) whose intended use was to abrade the outer surfaces of rocks to expose more pristine material. Motor currents drawn by the RAT motors are related to the strength and hardness of rock surfaces undergoing abrasion, and these data can be used to infer more about a target rock's physical properties. However, no calibration of the RAT exists. Here, we attempt to derive an empirical correlation using an assemblage of terrestrial rocks and apply this correlation to data returned by the rover Spirit. The results demonstrate a positive correlation between rock strength and RAT grind energy for rocks with compressive strengths less than about 150 MPa, a category that includes all but the strongest intact rocks. Applying this correlation to rocks abraded by Spirit's RAT, the results indicate a large divide in strength between more competent basaltic rocks encountered in the plains of Gusev crater (Adirondack-class rocks) and the weaker variety of rock types measured in the Columbia Hills. Adirondack-class rocks have estimated compressive strengths in the range of 70–130 MPa and are significantly less strong than fresh terrestrial basalts; this may be indicative of a degree of weathering-induced weakening. Rock types in the Columbia Hills (Wishstone, Watchtower, Clovis, and Peace class) all have compressive strengths

Wind blowing over sand on Earth produces decimeter-wavelength ripples and hundred-meter– to kilometer-wavelength dunes: bedforms of two distinct size modes. Observations from the Mars Science Laboratory Curiosity rover and the Mars Reconnaissance Orbiter reveal that Mars hosts a third stable wind-driven bedform, with meter-scale wavelengths. These bedforms are spatially uniform in size and typically have asymmetric profiles with angle-of-repose lee slopes and sinuous crest lines, making them unlike terrestrial wind ripples. Rather, these structures resemble fluid-drag ripples, which on Earth include water-worked current ripples, but on Mars instead form by wind because of the higher kinematic viscosity of the low-density atmosphere. A reevaluation of the wind-deposited strata in the Burns formation (about 3.7 billion years old or younger) identifies potential wind-drag ripple stratification formed under a thin atmosphere.

Evidence for sand motion is found in repeated observations of sand dunes at three sites in the Martian tropics by the High Resolution Imaging Science Experiment on Mars Reconnaissance Orbiter. An eroding outcrop of layered sediments is identified as a possible source of the sand in Pasteur crater. Ancient layered sediments in Becquerel crater are actively being carved into flutes and yardangs by the blowing sands. Dunes in an un-named crater in Meridiani near the Mars Exploration Rover Opportunity landing site advanced as much as 50 cm over an interval of one Martian year. Copyright © 2012 John Wiley & Sons, Ltd.

The High-Resolution Imaging Science Experiment (HiRISE) onboard Mars Reconnaissance Orbiter (MRO) has been used to observe Phobos and Deimos at spatial scales of around 6 and 20 m/px, respectively. HiRISE ( McEwen et al., JGR, 112, CiteID E05S02, DOI: 10.1029/2005JE002605, 2007 ) has provided, for the first time, high-resolution colour images of the surfaces of the Martian moons. When processed, by the production of colour ratio images for example, the data show considerable small-scale heterogeneity, which might be attributable to fresh impacts exposing different materials otherwise largely hidden by a homogenous regolith. The bluer material that is draped over the south-eastern rim of the largest crater on Phobos, Stickney, has been perforated by an impact to reveal redder material and must therefore be relatively thin. A fresh impact with dark crater rays has been identified. Previously identified mass-wasting features in Stickney and Limtoc craters stand out strongly in colour. The interior deposits in Stickney appear more inhomogeneous than previously suspected. Several other local colour variations are also evident. Deimos is more uniform in colour but does show some small-scale inhomogeneity. The bright “streamers” ( Thomas et al., Icarus, 123, 536–556,1996 ) are relatively blue. One crater to the south-west of Voltaire and its surroundings appear quite strongly reddened with respect to the rest of the surface. The reddening of the surroundings may be the result of ejecta from this impact. The spectral gradients at optical wavelengths observed for both Phobos and Deimos are quantitatively in good agreement with those found by unresolved photometric observations made by the Imager for Mars Pathfinder (IMP; Thomas et al., JGR, 104, 9055–9068, 1999 ). The spectral gradients of the blue and red units on Phobos bracket the results from IMP.

Gale Crater contains a 5.2 km-high central mound of layered material that is largely sedimentary in origin and has been considered as a potential landing site for both the MER (Mars Exploration Rover) and MSL (Mars Science Laboratory) missions. We have analyzed recent data from Mars Reconnaissance Orbiter to help unravel the complex geologic history evidenced by these layered deposits and other landforms in the crater. Results from imaging data from the High Resolution Imaging Science Experiment (HiRISE) and Context Camera (CTX) confirm geomorphic evidence for fluvial activity and may indicate an early lacustrine phase. Analysis of spectral data from the CRISM (Compact Reconnaissance Imaging Spectrometer for Mars) instrument shows clay-bearing units interstratified with sulfate-bearing strata in the lower member of the layered mound, again indicative of aqueous activity. The formation age of the layered mound, derived from crater counts and superposition relationships, is ∼3.6–3.8 Ga and straddles the Noachian–Hesperian time-stratigraphic boundary. Thus Gale provides a unique opportunity to investigate global environmental change on Mars during a period of transition from an environment that favored phyllosilicate deposition to a later one that was dominated by sulfate formation.

Martian slope gullies are argued to be evidence for recent liquid water flow on the surface of Mars. To explain the source of water, a wide range of environmental conditions and processes has been invoked. However, a lack of information about the environmental context or timing of gully activity makes it difficult to evaluate the theories. Here, we present new observations of extensive gully modification over the past 6 Mars years within dune gullies with slope-gully morphology. Observed activity within 18 gullies in 7 dune fields constrains timing to winter, which is consistent with observed slope-gully activity. These observations show that fluvial processes are unlikely to cause present-day Martian dune-gully activity, and imply that CO 2 frost accumulation may play the dominant role.

HiRISE images of Mars with ground sampling down to 25 cm/pixel show that the dust-rich mantle covering the surfaces of the Tharsis Montes is organized into ridges whose form and distribution are consistent with formation by aeolian saltation. Other dusty areas near the volcanoes and elsewhere on the planet exhibit a similar morphology. The material composing these “reticulate” bedforms is constrained by their remote sensing properties and the threshold curve combined with the saltation/suspension boundary, both of which vary as a function of elevation (atmospheric pressure), particle size, and particle composition. Considering all of these factors, dust aggregates are the most likely material composing these bedforms. We propose that airfall dust on and near the volcanoes aggregates in situ over time, maybe due to electrostatic charging followed by cementation by salts. The aggregates eventually reach a particle size at which saltation is possible. Aggregates on the flanks are transported downslope by katabatic winds and form linear and “accordion” morphologies. Materials within the calderas and other depressions remain trapped and are subjected to multidirectional winds, forming an interlinked “honeycomb” texture. In many places on and near the volcanoes, light-toned, low thermal inertia yardangs and indurated surfaces are present. These may represent “duststone” formed when aggregates reach a particle size below the threshold curve, such that they become stabilized and subsequently undergo cementation.

HiRISE has been producing a large number of scientifically useful color products of Mars and other planetary objects. The three broad spectral bands, coupled with the highly sensitive 14 bit detectors and time delay integration, enable detection of subtle color differences. The very high spatial resolution of HiRISE can augment the mineralogic interpretations based on multispectral (THEMIS) and hyperspectral datasets (TES, OMEGA and CRISM) and thereby enable detailed geologic and stratigraphic interpretations at meter scales. In addition to providing some examples of color images and their interpretation, we describe the processing techniques used to produce them and note some of the minor artifacts in the output. We also provide an example of how HiRISE color products can be effectively used to expand mineral and lithologic mapping provided by CRISM data products that are backed by other spectral datasets. The utility of high quality color data for understanding geologic processes on Mars has been one of the major successes of HiRISE.

The surface topology, surface area, and volume of rock simulant targets abraded in a boundary layer wind tunnel are quantified using results from a laser scanner with a spatial resolution of ~300 µm, an order of magnitude improvement over previous measurement techniques. Laplacian smoothing enables delineation of topography at even finer scale. The surface area to volume ratio generally increases at a rate greater than log (2/3), indicating roughening with time. Sub-millimeter- to millimeter-scale changes provide information on the relationships between natural abrasion and the resulting textures. Pit size frequency statistics reflect a balance between pit production from fresh impacts and net loss when two or more pits merge into a single pit. Most targets show a rollover in curves, whereby the number of pits smaller than a few hundred µm in size decrease with continuing abrasion whereas the abundance of larger pits increases. This is evidence that smaller pits merge into larger ones over time. There is a weak correspondence between elongation and diameter, with larger pits tending to have a more elliptical shape, especially among more abraded samples. For angled front faces and with increasing abrasion, pits tend to dig into the targets at an angle greater than that of the facet. Most facets have a greater fraction of elongated pits aligned downwind at the conclusion of abrasion compared to the start, with variable trends at intermediate stages. Profiles of layered targets show a progressive retreat of the front face, with angled targets developing stair-stepped topography, with 60° angles showing the greatest development and 30° the least. Natural abraded rocks in terrestrial desert environments and probably on Mars show many of the textural characteristics documented in the wind tunnel rock simulants. Correlation of these parameters promises to provide information on integrated abrasion duration, offering a new tool for constraining weathering history on Earth and Mars.

The High Resolution Imaging Science Experiment (HiRISE) on the Mars Reconnaissance Orbiter (MRO) acquired 8 terapixels of data in 9137 images of Mars between October 2006 and December 2008, covering ~0.55% of the surface. Images are typically 5–6 km wide with 3-color coverage over the central 20% of the swath, and their scales usually range from 25 to 60 cm/pixel. Nine hundred and sixty stereo pairs were acquired and more than 50 digital terrain models (DTMs) completed; these data have led to some of the most significant science results. New methods to measure and correct distortions due to pointing jitter facilitate topographic and change-detection studies at sub-meter scales. Recent results address Noachian bedrock stratigraphy, fluvially deposited fans in craters and in or near Valles Marineris, groundwater flow in fractures and porous media, quasi-periodic layering in polar and non-polar deposits, tectonic history of west Candor Chasma, geometry of clay-rich deposits near and within Mawrth Vallis, dynamics of flood lavas in the Cerberus Palus region, evidence for pyroclastic deposits, columnar jointing in lava flows, recent collapse pits, evidence for water in well-preserved impact craters, newly discovered large rayed craters, and glacial and periglacial processes. Of particular interest are ongoing processes such as those driven by the wind, impact cratering, avalanches of dust and/or frost, relatively bright deposits on steep gullied slopes, and the dynamic seasonal processes over polar regions. HiRISE has acquired hundreds of large images of past, present and potential future landing sites and has contributed to scientific and engineering studies of those sites. Warming the focal-plane electronics prior to imaging has mitigated an instrument anomaly that produces bad data under cold operating conditions.

Recent Mars missions have stimulated considerable thinking about the surficial geochemical evolution of Mars. Among the major relevant findings are the presence in Meridiani Planum sediments of the mineral jarosite (a ferric sulfate salt) and related minerals that require formation from an acid–salt brine and oxidizing environment. Similar mineralogies have been observed in acidic saline lake sediments in Western Australia (WA), and these lakes have been proposed as analogues for acidic sedimentary environments on Mars. The prior version of the equilibrium chemical thermodynamic FREZCHEM model lacked Al and Si chemistries that are needed to appropriately model acidic aqueous geochemistries on Earth and Mars. The objectives of this work were to (1) add Al and Si chemistries to the FREZCHEM model, (2) extend these chemistries to low temperatures ( FREZCHEM is an equilibrium chemical thermodynamic model parameterized for concentrated electrolyte solutions using the Pitzer approach for the temperature range from 4 –NO 3 –OH–HCO 3 –CO 3 –CO 2 –O 2 –CH 4 –Si–H 2 O system that now contain 95 solid phases. There were similarities, differences, and uncertainties between Australian acidic, saline playa lakes and waters that likely led to the Burns formation salt accumulations on Mars. Both systems are similar in that they are dominated by (1) acidic, saline ground waters and sediments, (2) Ca and/or Mg sulfates, and (3) iron precipitates such as jarosite and hematite. Differences include: (1) the dominance of NaCl in many WA lakes, versus the dominance of Fe–Mg–Ca–SO 4 in Meridiani Planum, (2) excessively low K + concentrations in Meridiani Planum due to jarosite precipitation, (3) higher acid production in the presence of high iron concentrations in Meridiani Planum, and probably lower rates of acid neutralization and hence, higher acidities on Mars owing to colder temperatures, and (4) lateral salt patterns in WA lakes. The WA playa lakes display significant lateral variations in mineralogy and water chemistry over short distances, reflecting the interaction of acid ground waters with neutral to alkaline lake waters derived from ponded surface runoff. Meridiani Planum observations indicate that such lateral variations are much less pronounced, pointing to the dominant influence of ground water chemistry, vertical ground water movements, and aeolian processes on the Martian surface mineralogy.

Terrestrial ventifacts – rocks that have been abraded by windblown particles – are found in desert, periglacial, and coastal environments. On Mars, their abundance suggests that aeolian abrasion is one of the most significant erosional processes on the planet. There are several conflicting viewpoints concerning the efficacy of potential abrasive agents, principally sand and dust, and the relationships between wind direction and ventifact form. Our research, supported by a review of the literature, shows that sand, rather than dust or other materials, is the principle abrasive agent on Earth and Mars. Relative to dust, sand delivers about 1000× the energy onto rock surfaces on a per particle basis. Even multiple dust collisions will do little or no damage because the stress field from the impact is much smaller than the spacing of microflaws in the rock. The abrasion profiles of terrestrial ventifacts are consistent with a kinetic energy flux due to saltating sand, not airborne dust. Furthermore, Scanning Electron Microscope images reveal surfaces that are fractured and cleaved by sand grain impact. With respect to their distribution, ventifacts are found in regions that contain sand or did so in the past, but are not found where only dust activity occurs. Contrary to some published reports, our evidence from field studies, analytical models, and wind tunnel and other experiments indicates that windward, not leeward, abrasion is responsible for facet development and feature formation (pits, flutes, and grooves). Leeward abrasion is confined to fluvial conditions, in which the high viscosity and density of water are able to entrain sand-size material in vortices. Therefore, ventifacts and abraded terrain provide an unambiguous proxy for the direction of the highest velocity winds, and can be used to reconstruct palaeowind flow.

Water has supposedly marked the surface of Mars and produced characteristic landforms. To understand the history of water on Mars, we take a close look at key locations with the High-Resolution Imaging Science Experiment on board the Mars Reconnaissance Orbiter, reaching fine spatial scales of 25 to 32 centimeters per pixel. Boulders ranging up to approximately 2 meters in diameter are ubiquitous in the middle to high latitudes, which include deposits previously interpreted as finegrained ocean sediments or dusty snow. Bright gully deposits identify six locations with very recent activity, but these lie on steep (20 degrees to 35 degrees) slopes where dry mass wasting could occur. Thus, we cannot confirm the reality of ancient oceans or water in active gullies but do see evidence of fluvial modification of geologically recent mid-latitude gullies and equatorial impact craters.

Pumice and lithic clasts from gravel-mantled megaripples in the Argentinean Puna, an analog to Martian large ripples and Transverse Aeolian Ridges (TARs), were put in a boundary layer wind tunnel to derive threshold speeds for various stages of motion of the component clasts and observe incipient bedform development. Combined with results from a field meteorological station, it is found that the gravel components can initially only move under gusty conditions, with the impact of saltating pumice and sand lowering threshold. Pumices can saltate without the impact of sand, implying that they are both an impelling force for other pumices and lithics, and are the most likely clast constituent to undergo transport. Accumulation into bedforms in the tunnel occurs when clasts self organize, with larger, more immobile particles holding others in place, a process that is accentuated in the field on local topographic highs of the undulating ignimbrite bedrock surface. In such an arrangement, pumices and especially lithics remain largely stable, with vibration the dominant mode of motion. This results in sand and silt entrapment and growth of the bedform through infiltration and uplift of the gravel. Resulting bedforms are gravel-mantled ripple-like forms cored with fine grained sediment. The Martian aeolian environment is similar to the Puna in terms of having grains of variable size, infrequent wind gusts, and saltating sand, implying that some TARs on the planet may have formed in a similar way. Fil: Bridges, N. T.. University Johns Hopkins; Estados Unidos Fil: Spagnuolo, Mauro Gabriel. State University of Oregon; Estados Unidos. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina Fil: de Silva, S. L.. State University of Oregon; Estados Unidos Fil: Zimbelman, J. R.. National Air and Space Museum; Estados Unidos Fil: Neely, E. M.. State University of Oregon; Estados Unidos. Portland State University; Estados Unidos

The Mars Science Laboratory rover, “Curiosity” landed near the base of a 5 km-high mound of layered material in Gale crater. Mounted on the rover mast, the ChemCam instrument is designed to remotely determine the composition of soils and rocks located a few meters from the rover, using a Laser-Induced Breakdown Spectrometer (LIBS) coupled to a Remote Micro-Imager (RMI). We provide an overview of the diverse imaging investigations that were carried out by ChemCam’s RMI during the first year of operation on Mars. 1182 individual panchromatic RMI images were acquired from Sol 10 to Sol 360 to document the ChemCam LIBS measurements and to characterize soils, rocks and rover hardware. We show several types of derived imaging products, including mosaics of images taken before and after laser shots, difference images to enhance the most subtle laser pits, merges with color Mastcam-100 images, micro-topography using the Z-stack technique, and time lapse movies. The very high spatial resolution of RMI is able to resolve rock textures at sub-mm scales, which provides clues regarding the origin (igneous versus sedimentary) of rocks, and to reveal information about their diagenetic and weathering evolution. In addition to its scientific value over the range accessible by LIBS (1–7 m), we also show that RMI can also serve as a powerful long distance reconnaissance tool to characterize the landscape at distances up to several kilometers from the rover.