Search

Introduction: The coronavirus (COVID-19) has affected millions of people around the world. COVID-19 patients, particularly those with the critical illness, have coagulation abnormalities, thrombocytopenia, and a high prevalence of intravascular thrombosis., Objectives: This work aims to assess the prevalence of coagulation disorders and their related symptoms among COVID-19 patients in the Al-Jouf region of Saudi Arabia., Subjects and Methods: We conducted a retrospective study on 160 COVID-19 patients. Data were collected from the medical records department of King Abdulaziz Specialist Hospital, Sakaka, Al-Jouf, Saudi Arabia. The socio-demographic data, risk factors, coagulation profile investigation results, symptom and sign data related to coagulation disorders, and disease morbidity and mortality for COVID-19 patients were extracted from medical records, and the data were stored confidentially., Results: Males represented the highest prevalence of COVID-19 infection at 65%; 29% were aged 60 or over; 28% were smokers; and 36% were suffering from chronic diseases, with diabetes mellitus representing the highest prevalence. Positive D-dimer results occurred in 29% of cases, with abnormal platelet counts in 26%., Conclusion: Our findings confirm that the dysregulation of the coagulation cascade and the subsequent occurrence of coagulation disorders are common in coronavirus infections. The results show absolute values, not increases over normal values; thus, it is hard to justify increased risk and presence based on the presented data.

A halotolerant biosurfactant producer Pseudomonas aeruginosa strain NSH3 (NCBI Gene Bank Accession No. MN149622) was isolated to degrade high concentrations of recalcitrant polyaromatic hydrocarbons (PAHs) and polyaromatic heterocyclic sulfur compounds (PASHs). In biphasic batch bioreactors, the biodegradation and biosurfactant-production activities of NSH3 have been significantly enhanced (p < 0.0001) by its decoration with eco-friendly prepared magnetite nanoparticles (MNPs). On an artificially contaminated sediment microcosm level, regression modeling and statistical analysis based on a 2 3 full factorial design of experiments were trendily applied to provide insights into the interactive impacts of such pollutants. MNPs-coated NSH3 were also innovatively applied for nanobioremediation (NBR) of in-vitro diesel oil-polluted sediment microcosms. Gravimetric, chromatographic, and microbial respiratory analyses proved the significantly enhanced biodegradation capabilities of MNPs-coated NSH3 (p < 0.001) and the complete mineralization of various recalcitrant diesel oil components. Kinetic analyses showed that the biodegradation of iso- and n-alkanes was best fitted with a second-order kinetic model equation. Nevertheless, PAHs and PASHs in biphasic batch bioreactors and sediment microcosms followed the first-order kinetic model equation. Sustainable NBR overcome the toxicity of low molecular weight hydrocarbons, mass transfer limitation, and steric hindrance of hydrophobic recalcitrant high molecular weight hydrocarbons and alkylated polyaromatic compounds., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Sustainable lignocellulosic spent waste rice straw (SWRS) from bioethanol production inventively applied in this study to valorize petroleum production produced water (PPPW). SWRS expressed efficient pollutant removal over a wide range of petroleum concentration, temperature, pH, salinity, and mixing rate reaching approximately 217 mg/g, within four hours contact time. Kinetic studies revealed a pseudo-second-order chemisorption process with a boundary layer control and 16.97 kJ/mol activation energy where the intra-particle diffusion was not the only rate regulatory step. Thermodynamic studies revealed spontaneous, favorable, and endothermic adsorption, with a strong affinity between the SWRS and oil molecules. Biosorption mechanism studies proved the enrollment of SWRS components' lignin, cellulose, and hemicellulose in the oil uptake with the predominance of chemisorption over physisorption onto the rough and highly porous SWRS surface. A single-stage batch biosorption process was designed based on the best fitted Langmuir adsorption isotherm and applied on a real PPPW sample. The Egyptian standard limits for safe industrial effluents discharge into marine environment with a concomitant decrease in scale formation precursors were achieved recommending its safe reuse for enhanced oil recovery. Finally, for accomplishing zero-waste, SWRS disposed of PPPW treatment substantiated valorized solid biofuel with a sufficient calorific value 38.56 MJ/kg., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The discharge of the toxic phenol-polluted petro-industrial effluents (PPPIE) has severe environmental negative impacts, thus it is mandatory to be treated before its discharge. The objective of this review was to discuss the sustainable application of microalgae in phenols degradation, with a special emphasis on the enzymes involved in this bioprocess and the factors affecting the success of PPPIE phycoremediation. Moreover, it confers the microalgae bioenergetic strategies to degrade different forms of phenols in PPPIE. It also points out the advantages of the latest application of bacteria, fungi and microalgae as microbial consortia in phenols biodegradation. Briefly, phycoremediation of PPPIE consumes carbon dioxide emitted from petro-industries for; valorization of the polluted water to be reused and production of algal biomass which can act as a source of energy for such integrated bioprocess. Besides, the harvested algal biomass can feasibly produce; third-generation biofuels, biorefineries, bioplastics, fish and animal feed, food supplements, natural dyes, antioxidants and many other valuable products. Consequently, this review precisely confirms that the phycoremediation of PPPIE is a win-win process for a green environment and a sustainable future. Thus, to achieve the three pillars of sustainability; social, environmental and economic; it is recommendable to integrate PPPIE treatment with algal cultivation. This integrated process would overcome the problem of greenhouse gas emissions, global warming and climate change, solve the problem of water-scarce, and protect the environment from the harmful negative impacts of PPPIE., (© 2021 The Society for Applied Microbiology.)

This review emphasizes the win-win one-pot valorization process of different waste biomass that composed of many biological macromolecules (e.g. polysaccharides, polyphenols, carbohydrates, lipids, enzymes, proteins, etc.) and other biomolecules (e.g. alkaloids, terpenoids, tannins, phenolics, carotenoids, amino acids, sugars, vitamins, etc.) into biofunctionalized magnetite (Fe 3 O 4 ) nanoparticles (BMNPs). It illustrates the sustainable recruitment of microbial intra- and extra-cellular metabolites, proteins, and/or enzymes in the biosynthesis of BMNPs. It elucidates the environmental affluence of such sustainable, cost-effective, and ecofriendly BMNPs as an antimicrobial agent for water disinfection, photo-degrader, and adsorbent for different xenobiotics, organic and inorganic water pollutants. It confers the future environmental aspects of BMNPs in biofuels production from lipids and lignocellulosic wastes, biosensors manufacturing and bio-upgrading of petroleum fractions, etc. It discusses the circular economy, challenges, and opportunities for scaling up the zero-waste green synthesis of MNPs. Nevertheless, imminent investigations are still needed to elucidate the exact rule of biological macro- and micro- molecules in BMNPs synthesis and mechanisms involved in its microbicidal and photodegradation activities. Accentuated researches are more required on the toxicity and/or biosafety of the green synthesized BMNPs to humans and other non-target organisms to ensure its eco-safety upon environmental applications., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The work aimed to synthesize three heterojunction photocatalysts (E g = 2.65-2.78 eV) via in-situ encapsulation of 5% zinc doped titanium oxynitride (Zn 0.05 TiO x N y ) catalyst into MOF-5 and bulk (BCN)/sulfur-doped (SCN) g-C 3 N 4 supports using a microwave method. The prepared photocatalysts were characterized and utilized to purify textile industrial wastewater from the organic dye (e.g., methylene blue, MB) and microbial (e.g., E. coli, S. aureus, and C. albicans) contaminants under dark, visible, and solar lights. The output data confirmed the higher activity of Zn 0.05 TiO x N y @SCN and Zn 0.05 TiO x N y @MOF-5 for photo-induced microbial growth inactivation (> 90%) under visible light, with photo-biocidal efficiency of 0.91-1.69 mCFU/Einstein. Such a phenomenon is ascribed to the synergism between the high antimicrobial capacity of supports and photoactivity of Zn 0.05 TiO x N y . Also, Zn 0.05 TiO x N y @SCN exhibited far superiority to mineralize MB dye (K photo of 2.73 × 10 -2 min -1 ) under direct sunlight due to its high photonic (ζ% of 4.4-8.3%)/quantum (QE of 0.56-0.54%) efficiencies for the generation of hydroxyl and superoxide ( - •O 2 /•OH) oxidative species. As a practical case study, all heterojunction photocatalysts also demonstrated high-performance stability (5 cycles) for real textile wastewater treatment under sunlight (efficiency = 76.1-84.6%)., (Copyright © 2020 Elsevier B.V. All rights reserved.)

One of the main precursors of air pollution and acid rains is the presence of the recalcitrant thiophenic compounds, for example dibenzothiophene (DBT) and its derivatives in transportation fuels. In an attempt to achieve the worldwide regulations of ultra-low sulfur transportation fuels without affecting its hydrocarbon skeleton, a biphasic medium containing 100 mg/L DBT dissolved in n-hexadecane (1/4 oil/water v/v) used for enrichment and isolation of selective biodesulfurizing bacterium from an oil-polluted sediment sample collected from Egyptian Red Sea shoreline. The isolated bacterium is facultative anaerobe, motile, spore-former, and mesophile. It is genetically identified as Paenibacillus glucanolyticus strain HN4 (NCBI Gene Bank Accession No. MT645230). HN4 desulfurized DBT as a model of the recalcitrant thiophenic compounds without affecting its hydrocarbon skeleton via the 4S-pathway producing 2-hydroxybiphenyl (2-HBP) as a dead end product. HN4 substantiated to be a hydrocarbon tolerant, biosurfactants(s) producer, and endorsed unique enzymatic system capable of desulfurizing broad range of thiophenic compounds and expressed an efficient desulfurization activity against the recalcitrant alkylated DBTs. As far our knowledge, it is the first reported BDS study using P. glucanolyticus. Statistical optimization based on One-Factor-At-A-Time (OFAT) technique and response surface methodology (RSM) applied for elucidation of mathematical model correlations describing and optimizing the effect of different physicochemical parameters on batch biphasic BDS process. That illustrated an approximate increase in BDS efficiency by 1.34 fold and recorded 94% sulfur removal in biphasic batch process at optimum operation conditions of 120 h, 0.14 wt% S-content model oil (DBT dissolved in n-hexadecane), 33.5 °C, pH7 and 1/1 oil/water phase ratio, and 147 rpm. Resting cells of HN4 in a biphasic reactor (1/1 v/v) decreased the sulfur content of a refractory thiophenic model oil (thiophene, benzothiophene, DBT, and alkylated DBT dissolved in n-hexadecane) from 0.14 to 0.027 wt%, and petro-diesel from 0.2 to 0.04 wt%, within 120 h, keeping the calorific value of the treated fuel intact. Consequently, that novel strain could be recommended as a promising candidate for BDS as complementary to hydrodesulfurization process in oil refinery.

Aims: This research was conducted to investigate the biocatalytic remediation of xenobiotics polluted seawater using two biocatalysts; whole bacterial cells of facultative aerobic halotolerant Corynebacterium variabilis Sh42 and its extracted crude enzymes., Methods and Results: One-Factor-at-A-Time technique and statistical analysis were applied to study the effect of initial substrate concentrations, pH, temperature, and initial biocatalyst concentrations on the batch biocatalytic degradation of three xenobiotic pollutants (2-hydroxybiphenyl (2-HBP), catechol and benzoic acid) in artificial seawater (salinity 3·1%). HPLC and gas-chromatography mass spectroscopy analyses were utilized to illustrate the quantitative removal of the studied aromatic xenobiotic pollutants and their catabolic pathway. The results revealed that the microbial and enzymatic cultures followed substrate inhibition kinetics. Yano and Koga's equation showed the best fit for the biokinetic degradation rates of 2-HBP and benzoic acid, whereas Haldane biokinetic model adequately expressed the specific biodegradation rate of catechol. The biokinetic results indicated the good efficiency and tolerance of crude enzyme for biocatalytic degradation of extremely high concentrations of aromatic pollutants than whole C. variabilis Sh42 cells. The monitored by-products indicated that the catabolic degradation pathway followed an oxidation mechanism via a site-specific monooxygenase enzyme. Benzoic acid and catechol were identified as major intermediates in the biodegradation pathway of 2-HBP, which were then biodegraded through meta-cleavage to 2-hydroxymuconic semialdehyde. With time elapsed, the semialdehyde product was further biodegraded to acetaldehyde and pyruvic acid, which would be further metabolized via the bacterial TCA cycle., Conclusion: The batch enzymatic bioreactors performed superior-specific biocatalytic degradation rates for all the studied xenobiotic pollutants., Significance and Impact of the Study: The enzymatic system of C. variabilis Sh42 is tolerable for toxic xenobiotics and different physicochemical environmental parameters. Thus, it can be recommended as an effective biocatalyst for biocatalytic remediation of xenobiotics polluted seawater., (© 2020 The Society for Applied Microbiology.)

Aims: Investigate the capability of Aspergillus brasiliensis ATCC 16404 to mycosynthesize Co 3 O 4 -NPs., Methods and Results: Mycelial cell-free filtrate of A. brasiliensis ATCC 16404 was applied for mycosynthesis of Co 3 O 4 -NPs. The preliminary indication for the formation of Co 3 O 4 -NPs was the change in colour from yellow to reddish-brown. One-factor-at a time-optimization technique was applied to determine the optimum physicochemical conditions required for the mycosynthesis of Co 3 O 4 -NPs and they were found to be: 72 h for reaction time, pH 11, 30°C, 100 rev min -1 for shaking speed in the darkness using 4 mmol l -1 of CoSO 4. 7H 2 O and 5·5% of A. brasiliensis dry weight mycelium (w/v). The mycosynthesized Co 3 O 4 -NPs were characterized using various techniques: spectroscopy including UV/Vis spectrophotometry, dynamic light scattering (DLS), zeta potential measurement, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy and X-ray diffraction; and vibrating sample magnetometry and microscopy including field emission scanning electron microscopy and high-resolution transmission electron microscopy. Spectroscopic techniques confirmed the formation of Co 3 O 4 -NPs and the microscopic ones confirmed the shape and size of the mycosynthesized Co 3 O 4 -NPs as quasi-spherical shaped, monodispersed nanoparticles with a nano size range of 20-27 nm. The mycosynthesized Co 3 O 4 -NPs have excellent magnetic properties and exhibited a good antimicrobial activity against some pathogenic micro-organisms., Conclusion: Ferromagnetic Co 3 O 4 -NPs with considerable antimicrobial activity were for the first time mycosynthesized., Significance and Impact of the Study: The use of fungi as potential bionanofactories for mycosynthesis of nanoparticles is relatively a recent field of research with considerable prospects., (© 2019 The Society for Applied Microbiology.)

Aims: In order to efficiently control the corrosive sulphate-reducing bacteria (SRB), the main precursor of the microbial influenced corrosion (MIC) in oil industry, the ability of Trichoderma longibrachiatumDSMZ 16517 to synthesize silver nanoparticles (AgNPs) was investigated and their biocidal activity against halotolerant SRB was tested., Methods and Results: The mycelial cell-free filtrate (MCFF) bioreduced the silver ions (Ag + ) to their metallic nanoparticle state (Ag 0 ), which was presumptively indicated by the appearance of a dark brown suspension and confirmed by the characteristic absorbance of AgNPs at ʎ 422nm . One-factor-at-a-time technique was used to optimize the effect of temperature, time, pH, fungal biomass and silver nitrate concentrations, stirring rates and dark effect. The dynamic light scattering (DLS) analysis revealed average AgNPs size and zeta potential values of 17·75 nm and -26·8 mV, respectively, indicating the stability of the prepared AgNPs. The X-ray diffraction (XRD) pattern assured the crystallinity of the mycosynthesized AgNPs, with an average size of 61 nm. The field emission scanning electron microscope (FESEM) and high-resolution transmission electron microscope (HRTEM) showed nonagglomerated spherical, triangular and cuboid AgNPs ranging from 5 to 11 ± 0·5 nm. The Fourier transform infrared spectroscopy (FT-IR) analysis of the mycosynthesized AgNPs affirmed the role of MCFF as a reducing and capping agent. A preliminary suggested mechanism for mycosynthesis of AgNPs was elucidated. The mycosynthesized AgNPs expressed high biocidal activity against a halotolerant planktonic mixed culture of SRB. The HRTEM analysis showed a clear evidence of an alteration in cell morphology, a disruption of SRB cell membranes, a lysis in cell wall and a cytoplasmic extraction after treatment with AgNPs. This confirmed the bactericidal effect of the mycosynthesized AgNPs., Conclusion: The biocidal activity of the mycosynthesized AgNPs against halotolerant planktonic SRB makes it an attractive option to control MIC in the petroleum industry., Significance and Impact of the Study: This research provides a helpful insight into the development of a new mycosynthesized biocidal agent against the corrosive sulphate-reducing bacteria., (© 2018 The Society for Applied Microbiology.)

Aims: Since mycosynthesis of metal nanoparticles (NPs) is advertised as a promising and ecofriendly approach. Thus, this study aims to investigate the capability of Aspergillus brasiliensis ATCC 16404 for mycosynthesis of silver NPs (AgNPs)., Methods and Results: One-factor-at-a-time-technique was used to study the effect of different physicochemical parameters: the reaction time, pH, temperature, different stirring rates, illumination, and finally, the different concentrations of silver nitrate and fungal biomass on the mycosynthesis of AgNPs. The visual observation showed the characteristic brown colour formation due to the bioreduction of Ag + ions to Ag 0 by the mycelial cell-free filtrate (MCFF). The UV/visible spectrophotometric technique displayed a characteristic sharp peak at ʎ 440 confirming the mycosynthesis of AgNPs. The zeta potential value -16·7 mV assured the long-term stability of AgNPs and the dynamic light scattering analysis revealed good dispersion and average particle size 77 nm. The energy dispersive X-ray spectroscopy displayed a maximum elemental distribution of silver elements. The X-ray diffraction spectroscopy demonstrated the crystallinity of the mycosynthesized AgNPs. The field emission scanning electron microscope and high-resolution transmission electron microscope revealed monodispersed spherical shaped AgNPs with average particle size of 6-21 nm. The FTIR analysis showed the major peaks of proteins providing the possible role of MCFF in the synthesis and stabilization of the AgNPs. The mycosynthesized AgNPs expressed good biocidal activity against different pathogenic micro-organisms causing some water-related diseases and health problems to local residents., Conclusions: This study proved that A. brasiliensis ATCC 16404 MCFF has good potential for mycosynthesis of AgNPs, which exhibited good antimicrobial effect on different pathogenic micro-organisms; thus, it can be applied for water disinfection., Significance and Impact of the Study: This research provides a helpful insight into the development of a new mycosynthesized antimicrobial agent., (© 2018 The Society for Applied Microbiology.)

The host immune response has a key role in breast cancer progression and response to therapy. However, relative to primary invasive breast cancers, the immune milieu of breast ductal carcinoma in situ (DCIS) is less understood. Here, we profile tumor infiltrating lymphocytes and expression of the immune checkpoint ligand programmed death ligand 1 (PD-L1) in 27 cases of DCIS with known estrogen receptor (ER), progesterone receptor, and human epidermal growth factor 2 (HER-2) expression using tissue microarrays. Twenty-four cases were pure DCIS and three had associated invasive ductal carcinoma. Tumors were stained by immunohistochemistry for PD-L1, as well as the lymphocyte markers CD3, CD4, CD8, FoxP3, and CD20. The expression of PD-L1 by DCIS carcinoma cells and tumor infiltrating lymphocytes was determined, and the average tumor infiltrating lymphocytes per high power field were manually scored. None of the DCIS cells expressed PD-L1, but 81% of DCIS lesions contained PD-L1+ tumor infiltrating lymphocytes. DCIS with moderate-diffuse tumor infiltrating lymphocytes was more likely to have PD-L1+ tumor infiltrating lymphocytes (P=0.004). Tumor infiltrating lymphocytes with high levels of PD-L1 expression (>50% cells) were seen only in triple-negative DCIS (P=0.0008), and PD-L1-tumor infiltrating lymphocytes were seen only in ER+/HER-2-DCIS (P=0.12). The presence of PD-L1+ tumor infiltrating lymphocytes was associated with a younger mean patient age (P=0.01). Further characterization of the DCIS immune microenvironment may identify useful targets for immune-based therapy and breast cancer prevention.

Background: Worldwide nowadays, relying on the second generation bioethanol from the lignocellulosic feedstock is a mandatory aim. However, one of the major drawbacks for high ethanol yield is the physical and chemical pretreatment of this kind of feedstock. As the pretreatment is a crucial process operation that modifies the lignocellulosic structure and enhances its accessibility for the high cost hydrolytic enzymes in an attempt to maximize the yield of the fermentable sugars. The objective of this work was to optimize and integrate a physicochemical pretreatment of one of the major agricultural wastes in Egypt; the sugar beet pulp (SBP) and the enzymatic saccharification of the pretreated SBP using a whole fungal cells with a separate bioethanol fermentation batch processes to maximize the bioethanol yield., Methods and Results: The response surface methodology was employed in this study to statistically evaluate and optimize the conditions for a thermal acid pretreatment of SBP. The significance and the interaction effects of the concentrations of HCl and SBP and the reaction temperature and time were studied using a three-level central composite design of experiments. A quadratic model equation was obtained to maximize the production of the total reducing sugars. The validity of the predicted model was confirmed. The thermally acid pretreated SBP was further subjected to a solid state fermentation batch process using Trichoderma viride F94. The thermal acid pretreatment and fungal hydrolyzes were integrated with two parallel batch fermentation processes of the produced hydrolyzates using Saccharomyces cerevisiae Y39, that yielded a total of ≈ 48 g/L bioethanol, at a conversion rate of ≈ 0.32 g bioethanol/ g SBP., Conclusion: Applying the proposed integrated process, approximately 97.5 gallon of ethanol would be produced from a ton (dry weight) of SBP.

This communication describes how olive solid wastes can be used to prepare activated carbon (AC), with soundly high surface areas, suitable to remove nitrite ions from water. Solid olive wastes, so called Jeft, separated as unwanted bi-products from olive oil mills, have been converted into charcoal. The charcoal was then physically and/or chemically activated using different compounds namely conc. H3PO4 or ZnCl2. Charcoal carbonization was performed under inert atmosphere to avoid loss of heated carbon by oxidation with air. Surface area measurements and SEM micrographs showed that activation using ZnCl2 yields AC with highest surface area and more porous surfaces. The ZnCl2-activated carbon was then used to remove nitrite ions from water by adsorption. Effects of different parameters on value of surface area and adsorption capacity of the AC were investigated. Commercial AC materials were used as reference for comparison. The AC showed higher adsorption capacity toward nitrite than other reported adsorbents. The results suggest that using 5 g of the ZnCl2-activated carbon per liter of heavily nitrite-contaminated water (50 ppm) may bring the contaminant concentration down to the WHO accepted concentration limits within 60 min. This work highlights the future feasibility of using olive waste as feed stocks to produce useful renewable materials while keeping in mind the wisdom "make wastes work in environmental protection"., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Background: Worldwide nowadays, relying on the second generation bioethanol from the lignocellulosic feedstock is a mandatory aim. However, one of the major drawbacks for high ethanol yield is the physical and chemical pretreatment of this kind of feedstock. As the pretreatment is a crucial process operation that modifies the lignocellulosic structure and enhances its accessibility for the high cost hydrolytic enzymes in an attempt to maximize the yield of the fermentable sugars. The objective of this work was to optimize and integrate a physicochemical pretreatment of one of the major agricultural wastes in Egypt; the sugar beet pulp (SBP) and the enzymatic saccharification of the pretreated SBP using a whole fungal cells with a separate bioethanol fermentation batch processes to maximize the bioethanol yield., Methods and Results: The response surface methodology was employed in this study to statistically evaluate and optimize the conditions for a thermal acid pretreatment of SBP. The significance and the interaction effects of the concentrations of HCl and SBP and the reaction temperature and time were studied using a three-level central composite design of experiments. A quadratic model equation was obtained to maximize the production of the total reducing sugars. The validity of the predicted model was confirmed. The thermally acid pretreated SBP was further subjected to a solid state fermentation batch process using Trichoderma viride F94. The thermal acid pretreatment and fungal hydrolyzes were integrated with two parallel batch fermentation processes of the produced hydrolyzates using Saccharomyces cerevisiae Y39, that yielded a total of ≈ 48 g/L bioethanol, at a conversion rate of ≈ 0.32 g bioethanol/ g SBP., Conclusion: Applying the proposed integrated process, approximately 97.5 gallon of ethanol would be produced from a ton (dry weight) of SBP.

Pichia veronae strain HSC-22 (accession number KP012558) showed a good tolerance to relatively high temperature, ethanol and sugar concentrations. Response surface optimization based on central composite design of experiments predicted the optimal values of the influencing parameters that affect the production of bioethanol from sugarcane molasses to be as follows: initial pH 5, 25% (w : v) initial molasses concentration, 35°C, 116 rpm, and 60 h. Under these optimum operating conditions the maximum bioethanol production on a batch fermenter scale was recorded as 32.32 g/L with 44% bioethanol yield.

Young women with ductal carcinoma in situ treated by breast-conserving therapy have a higher recurrence rate than do older women, and a younger age at diagnosis is associated with worse overall survival after recurrence. This study explores the clinical, pathologic, and immunohistochemical characteristics of ductal carcinoma in situ lesions diagnosed in women 40 years and younger with a focus on molecular subtypes to elucidate features that may contribute to the purported worse outcome for this patient population. Forty-one patients diagnosed with ductal carcinoma in situ at age 40 years and younger were identified over a 10-year period; 31 cases were used to construct tissue microarrays. The microarrays were labeled with antibodies to estrogen receptor, progesterone receptor, HER2, Ki-67, CK5/6, epidermal growth factor receptor, and p53 and subsequently classified as luminal A, luminal B, HER2, basal-like, or unclassifiable triple negative. All patients had high-grade (73.2%) or intermediate-grade (26.8%) ductal carcinoma in situ. The molecular subtype breakdown was 61.3% luminal A, 22.6% luminal B, 13% HER2, and 3.1% unclassifiable triple negative. The mean Ki-67 by subtype was 4.2%, 14%, 9.5%, and 50%, respectively. Mastectomy was performed in 33 patients (80%). Eight patients (20%) underwent excisional biopsy without subsequent mastectomy. In addition to a predominance of high-grade lesions, young patients had a high proportion of luminal B subtype, which may contribute to an increased rate of local recurrence in this population. A larger series is necessary to confirm the impact that the molecular subtypes of ductal carcinoma in situ in younger patients might have on outcome., (© 2013.)

The transcription factor Sox10 mediates the differentiation of neural crest-derived cells, and Sox10 labeling by immunohistochemistry (IHC) is used clinically primarily to support the diagnosis of melanoma. Sox10 expression by IHC has been previously documented in benign breast myoepithelial cells but not in breast carcinomas. Here, we report the first systematic study of Sox10 expression in invasive ductal carcinomas subclassified by IHC-defined molecular subtype (100 cases), as well as in 24 cases of ductal carcinoma in situ and 44 mammary fibroepithelial neoplasms. Tissue microarrays containing 168 primary breast tumors were subjected to IHC for Sox10. The extent of nuclear Sox10 labeling was scored by percentage labeling as follows: 0 (0%), 1+ (1%-25%), 2+ (25%-50%), 3+ (50%-75%), and 4+ (>75%). Overall, 40 (40%) of 100 invasive breast carcinomas demonstrated Sox10 immunoreactivity, which was seen primarily in the basal-like, unclassified triple-negative, and metaplastic carcinomas. Sox10 labeling was seen in 66% (38/58) of the basal-like, unclassified triple-negative, and metaplastic carcinomas as compared with 5% (2/42) of the luminal A, luminal B, and Her-2 carcinomas (P < .00001). Sox10 labeling was seen in 1 (4%) of 24 cases of ductal carcinoma in situ, which was negative for estrogen receptor/progesterone receptor. No labeling was seen in the stromal component of phyllodes tumors or fibroadenomas. These findings show that breast carcinoma must be considered in the differential diagnosis of melanoma for an S100-positive, Sox10-positive metastatic malignant neoplasm. Sox10 expression in the basal-like, unclassified triple-negative, and metaplastic carcinomas types supports the concept that these neoplasms show myoepithelial differentiation., (Copyright © 2013 Elsevier Inc. All rights reserved.)