Search

Since 2002, we have obtained size frequency distributions (SFDs) of main belt asteroids (MBAs), Hildas, and Jupiter Trojans (JTs) by using the 8.2-m Subaru Telescope equipped with the wide-field CCD cameras: Suprime-Cam (SC) or Hyper Suprime-Cam (HSC). After combining these SFDs with SFDs obtained from other surveys, we performed a comparative study of SFDs for each group of small bodies in an attempt to obtain clues about planet migration that affected those populations. The large aperture of the Subaru Telescope and the wide field of view of SC or HSC allowed us to detect small moving objects up to apparent magnitudes 24.4–24.5 mag (Rc-band), which corresponds to sub–km in diameter (D) for MBAs and about 1 km for Hildas and JTs. We combined the SFDs obtained from our surveys with those derived from published data to obtain the individual representative SFD for MBAs, Hildas and JTs in the size range of sub–km to 1000 km. We found that the SFDs of JTs and Hildas are roughly flat in the R-plot while that of MBAs has a wavy structure. We also investigated the SFDs of MBAs in the inner, middle, and outer regions of the main belt. We found that the shape of the SFDs changes gradually with increasing heliocentric distance across these regions. This trend continues beyond the outer region, where the SFD becomes flatter as shown by the SFDs of JTs and Hildas. Recent planet migration models suggest that the current JTs originated in the trans-Neptunian region and were captured as Trojans during planet migration. The finding of a gradual change of the SFDs from the inner MBAs to JTs is in line with the idea that trans-Neptunian objects (TNOs) were implanted not only into the JT region, but also into the main belt outer region (including the Hildas) at the early solar system. In order to investigate this implantation hypothesis, we considered a synthetic population of TNOs assuming with a SFD represented by a power-law distribution of N > D ∝ D - 3 , (estimated from crater record on Pluto and Charon). We then added this synthetic population to the MBA populations in various proportions. We found that the higher the proportion, the flatter the wavy SFD of MBAs becomes. This simple model yields a rough explanation for the gradual change of SFDs found from the inner main belt to the JT region. However, the shape of the modelled SFDs does not match observations for all sizes. In particular, because important discrepancies are seen in the small size range, we need to consider the removal of small objects by collisional evolution and/or Yarkovsky effect in the future.

PFS (Prime Focus Spectrograph), a next generation facility instrument on the Subaru telescope, is a very wide- field, massively multiplexed, and optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed in the 1.3 degree-diameter field of view. The spectrograph system has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously deliver spectra from 380nm to 1260nm in one exposure. The instrumentation has been conducted by the international collaboration managed by the project office hosted by Kavli IPMU. The team is actively integrating and testing the hardware and software of the subsystems some of which such as Metrology Camera System, the first Spectrograph Module, and the first on-telescope fiber cable have been delivered to the Subaru telescope observatory at the summit of Maunakea since 2018. The development is progressing in order to start on-sky engineering observation in 2021, and science operation in 2023. In parallel, the collaboration is trying to timely develop a plan of large-sky survey observation to be proposed and conducted in the framework of Subaru Strategic Program (SSP). This article gives an overview of the recent progress, current status and future perspectives of the instrumentation and scientific operation.

Analyses of meteorites and theoretical models indicate that some carbonaceous near-Earth asteroids may have been thermally altered due to radiative heating during close approaches to the Sun1–3. However, the lack of direct measurements on the subsurface doesn’t allow us to distinguish thermal alteration due to radiative heating from parent-body processes. In April 2019, the Hayabusa2 mission successfully completed an artificial impact experiment on the carbonaceous near-Earth asteroid (162173) Ryugu4,5, which provided an opportunity to investigate exposed subsurface material and test potential effects of radiative heating. Here we report observations of Ryugu’s subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. The strength and shape of the OH feature suggests that the subsurface material experienced heating above 300 °C, similar to the surface. In contrast, thermophysical modelling indicates that radiative heating cannot increase the temperature above 200 °C at the estimated excavation depth of 1 m, even at the smallest heliocentric distance possible for Ryugu. This supports the hypothesis that primary thermal alteration occurred on Ryugu’s parent body. Hayabusa2 created an artificial crater on Ryugu to analyse the subsurficial material of the asteroid. Results show that the subsurface is more hydrated than the surface. It experienced alteration processes that can be traced back to Ryugu’s parent body.

We present the current status and future plan of the instruments at the Subaru Telescope. The Hyper Suprime- Cam, which is a wide-field optical imager at the prime-focus and started the science operation in 2014, has been extensively used for a large survey program and general open use observations. The Prime Focus Spectrograph started the commissioning of the first subsystem, the Metrology Camera System, in 2018 and has been continuing the installation of the other subsystems. As the third system of the wide-field instrumentation suite, ULTIMATE-Subaru has started preliminary design for the GLAO system and conceptual designs for the science instruments. We will also present the status, upgrades, and future plan of the other facility instruments and visiting instruments.

The windscreen of the Subaru Telescope, which had been installed to prevent strong wind from directly hitting the telescope, was damaged and dropped out during the night operation at around 12:40 am, April 10, 2017. After that all observations at Subaru Telescope have been forced to be done without the windscreen. Due to the lack of the windscreen, the telescope would vibrate with strong wind, and the shape of the primary mirror would be deformed, thus the star image would become worse. Here we have investigated the effect of the lack of the windscreen statistically. The seeing at zenith at 500 nm was calculated from the FWHM of the star image obtained from the HSC on-site analysis software, and compared with the DIMM seeing at the east ridge of Maunakea simultaneously. Although the median seeing value varied by ~0.100 each year, the median seeing of DIMM before and after the incident is almost the same value (0.6100 and 0.6400), while the median seeing of HSC after the incident is ~0.0700 larger than before (0.6800 to 0.7500). The wind speeds at the telescope top ring, telescope center section, and outside the dome roof were investigated from the telescope telemetry data, and the correlations with the seeing were also investigated. Although the wind speed outside the dome did not change significantly before and after the incident, it was found that the wind speed inside the dome increased after the incident. Although it is not clear whether the degradation of the HSC seeing can be attributed to the absence of the windscreen, the seeing values over the last three years have statistically become ~10% worse than before.

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less than 10 µ m. The metrology camera system (MCS) serves as the optical encoder of the fiber positioners for configuring of fibers. The MCS locates at the Cassegrain focus of the Subaru telescope to cover the whole focal plane with one 50M pixel CMOS sensor. The information from MCS will be fed into the fiber positioner control system for closed loop control. The MCS was delivered to Subaru Observatory in Apr. 2018 and it had two engineering runs in Oct. 2018 and Aug. 2019. The 1st engineering run concluded that the original mirror supports need to be improved to provide better image quality. The newly designed mirror supports were installed before the 2nd engineering run. The 2nd engineering run result shows that the MCS overall position accuracy is better than 4μm and the image processing time is less than 4 seconds. The MCS is ready for the system integration with other PFS components.

We report the reflectivity of the Subaru Telescope's mirrors and these time evolutions measured with the Subaru Portable Spectrophotometer (SPS). Thanks to the capability of SPS, the absolute, spectroscopic reflectivity has been measured in-situ on the telescope since October 2017, and it becomes possible to understand and forecast the time evolution of the reflectivity degradation. We established a simple two factor model for the reflectivity degradation of the primary mirror which has coated with aluminum in 2017. From a study of CO2 cleaning with SPS, a part of dust on the mirror surface was found to be removed with CO2 cleaning, on the other hand, the roughness of the surface was found to become larger than before cleaning. The time evolution of the reflectivity of the primary mirror is now able to be forecasted. In parallel, we have applied SPS measurement to the infrared secondary mirror of the Subaru Telescope (IR M2) and found a significant loss of reflectivity in the visible wavelength in November 2018. IR M2 had been coated with silver in 2008 and used for over ten years. Although the original reflectivity of silver mirror is ~98% at 589 nm, there was ~50% in November 2018, and it was ~30% at in November 2019. One of the causes of the significant loss could be due to volcanic gas from the explosion of Kilauea in May 2018; however, it was hard to explain the continuing degradation in reflectivity through the following year. The reflectivity could not be recovered by any quick cleanings. We carried out recoating of IR M2 in November 2019. A three-factor model to explain the reflectivity degradation of IR M2 was considered. The model would help us to understand what happens on silver mirrors. On the other hand, unknown localized phenomenon such as a white spot was seen on the IR M2 mirror surface.

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degrees diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners and fiducial fibers are located. In addition, the acquisition and guiding cameras (AGCs), the cable wrapper, the fiducial fiber illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC’s Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. The delivery of PFI components started in 2017. After the verification of these components, the mechanical structure of the PFI is fully assembled in early 2019 and all Cobra positioners are integrated in summer 2020. A temperature controlled chamber with precise x-y scanner was setup for the verification of the fiber positioners. The testing of the target convergence performance of Cobra positioners is now in progress.

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a high-contrast imaging system installed at the 8-m Subaru Telescope on Maunakea, Hawaii. Due to its unique evolving design, SCExAO is both an instrument open for use by the international scientific community, and a testbed validating new technologies, which are critical to future high-contrast imagers on Giant Segmented Mirror Telescopes (GSMTs). Through multiple international collaborations over the years, SCExAO was able to test the most advanced technologies in wavefront sensors, real-time control with GPUs, low-noise high frame rate detectors in the visible and infrared, starlight suppression techniques or photonics technologies. Tools and interfaces were put in place to encourage collaborators to implement their own hardware and algorithms, and test them on-site or remotely, in laboratory conditions or on-sky. We are now commissioning broadband coronagraphs, the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) for high-speed speckle control, as well as a C-RED ONE camera for both polarization differential imaging and IR wavefront sensing. New wavefront control algorithms are also being tested, such as predictive control, multi-camera machine learning sensor fusion, and focal plane wavefront control. We present the status of the SCExAO instrument, with an emphasis on current collaborations and recent technology demonstrations. We also describe upgrades planned for the next few years, which will evolve SCExAO —and the whole suite of instruments on the IR Nasmyth platform of the Subaru Telescope— to become a system-level demonstrator of the Planetary Systems Imager (PSI), the high-contrast instrument for the Thirty Meter Telescope (TMT).

We analyzed the young (2.8-Myr-old) binary system FS Tau A using near-infrared (H-band) high-contrast polarimetry data from Subaru/HiCIAO and sub-millimeter CO (J=2-1) line emission data from ALMA. Both the near-infrared and sub-millimeter observations reveal several clear structures extending to $\sim$240 AU from the stars. Based on these observations at different wavelengths, we report the following discoveries. One arm-like structure detected in the near-infrared band initially extends from the south of the binary with a subsequent turn to the northeast, corresponding to two bar-like structures detected in ALMA observations with an LSRK velocity of 1.19-5.64 km/s. Another feature detected in the near-infrared band extends initially from the north of the binary, relating to an arm-like structure detected in ALMA observations with an LSRK velocity of 8.17-16.43 km/s. From their shapes and velocities, we suggest that these structures can mostly be explained by two streamers that connect the outer circumbinary disk and the central binary components. These discoveries will be helpful for understanding the evolution of streamers and circumstellar disks in young binary systems., 20 pages, 11 figures, accepted for publication in The Astrophysical Journal

The SR24 multi-star system hosts both circumprimary and circumsecondary disks, which are strongly misaligned from each other. The circumsecondary disk is circumbinary in nature. Interestingly, both disks are interacting, and they possibly rotate in opposite directions. To investigate the nature of this unique twin disk system, we present 0.''1 resolution near-infrared polarized intensity images of the circumstellar structures around SR24, obtained with HiCIAO mounted on the Subaru 8.2 m telescope. Both the circumprimary disk and the circumsecondary disk are resolved and have elongated features. While the position angle of the major axis and radius of the NIR polarization disk around SR24S are 55$^{\circ}$ and 137 au, respectively, those around SR24N are 110$^{\circ}$ and 34 au, respectively. With regard to overall morphology, the circumprimary disk around SR24S shows strong asymmetry, whereas the circumsecondary disk around SR24N shows relatively strong symmetry. Our NIR observations confirm the previous claim that the circumprimary and circumsecondary disks are misaligned from each other. Both the circumprimary and circumsecondary disks show similar structures in $^{12}$CO observations in terms of its size and elongation direction. This consistency is because both NIR and $^{12}$CO are tracing surface layers of the flared disks. As the radius of the polarization disk around SR24N is roughly consistent with the size of the outer Roche lobe, it is natural to interpret the polarization disk around SR24N as a circumbinary disk surrounding the SR24Nb-Nc system., Comment: 14 pages, 5 figures, accepted for publication in AJ

Context.The Hayabusa2 spacecraft launched by Japan Aerospace Exploration Agency has been conducting observations of the asteroid (162173) Ryugu since June 2018. The Telescopic Optical Navigation Camera (ONC-T) onboard Hayabusa2 has obtained thousands of images under a variety of illumination and viewing conditions.Aims.Our objective is to examine and validate the camera calibration, derive a photometric correction for creating global albedo maps, and to interpret the photometric modeling results to characterize the surface of Ryugu.Methods.We observed (162173) Ryugu with the Gemini-South telescope, and combined these measurements with other published ground-based observations of the asteroid. The ground-based observations were compared with the data obtained by ONC-T in order to validate the radiometric calibration mutually. We used a combination of the Hapke disk-integrated and disk-resolved model equations to simultaneously analyze the combined ground- and spacecraft-based data.Results.The average spectrum of Ryugu was classified as Cb-type following the SMASSII taxonomy and C/F-type following the Tholen taxonomy based on spacecraft observations. We derived Hapke model parameters for all seven color filters, which allowed us to photometrically correct images to within an error of vband) for Ryugu. The average reflectance factor at the standard illumination condition was 1.87 ± 0.14% in thevband. Moreover we measured a phase reddening of (2.0 ± 0.7) × 10−3μm−1deg−1for Ryugu, similar to that observed for the asteroid (101955) Bennu.Conclusions.The global color map showed that the general trend was for darker regions to also be redder regions, however there were some distinct exceptions to this trend. For example, Otohime Saxum was bright and red while Kibidango crater was dark and blue. The darkness and flatness of Ryugu’s reflectance might be caused by a high abundance of organic materials.

Centaurs have orbits between Jupiter and Neptune and are thought to originate from the trans-Neptunian region. Observations of surface properties of Centaurs and comparison with those of trans-Neptunian objects (TNOs) would provide constraints on their origin and evolution. We analyzed imaging data of nine known Centaurs observed by the Hyper Suprime-Cam (HSC) installed on the Subaru Telescope with the g and i band filters. Using the data available in the public HSC data archive as well as those obtained by the HSC Subaru Strategic Program (HSC-SSP) by the end of June, 2017, we obtained the g-i colors of the nine Centaurs. We compared them with those of known TNOs in the HSC-SSP data obtained by Terai et al. (2018). We found that the color distribution of the nine Centaurs is similar to that of those TNOs with high orbital inclinations, but distinct from those TNOs with low orbital inclinations. We also examined correlations between the colors of these Centaurs and their orbital elements and absolute magnitude. The Centaurs' colors show a moderate positive correlation with semi-major axis, while no significant correlations between the color and other orbital elements or absolute magnitude were found for these Centaurs. On the other hand, recent studies on Centaurs with larger samples show interesting correlations between their color and absolute magnitude or orbital inclination. We discuss how our data fit in these previous studies, and also discuss implications of these results for their origin and evolution., 12 pages, 4 figures. Accepted for publication in Publications of the Astronomical Society of Japan

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is an extremely modular high-contrast instrument installed on the Subaru telescope in Hawaii. SCExAO has a dual purpose. Its position in the northern hemisphere on a 8-meter telescope makes it a prime instrument for the detection and characterization of exoplanets and stellar environments over a large portion of the sky. In addition, SCExAO's unique design makes it the ideal instrument to test innovative technologies and algorithms quickly in a laboratory setup and subsequently deploy them on-sky. SCExAO benefits from a first stage of wavefront correction with the facility adaptive optics AO188, and splits the 600-2400 nm spectrum towards a variety of modules, in visible and near infrared, optimized for a large range of science cases. The integral field spectrograph CHARIS, with its J, H or K-band high-resolution mode or its broadband low-resolution mode, makes SCExAO a prime instrument for exoplanet detection and characterization. Here we report on the recent developments and scientific results of the SCExAO instrument. Recent upgrades were performed on a number of modules, like the visible polarimetric module VAMPIRES, the high-performance infrared coronagraphs, various wavefront control algorithms, as well as the real-time controller of AO188. The newest addition is the 20k-pixel Microwave Kinetic Inductance Detector (MKIDS) Exoplanet Camera (MEC) that will allow for previously unexplored science and technology developments. MEC, coupled with novel photon-counting speckle control, brings SCExAO closer to the final design of future high-contrast instruments optimized for Giant Segmented Mirror Telescopes (GSMTs)., 12 pages, 9 figures, conference proceedings (SPIE Astronomical telescopes and instrumentation 2018)

著者人数: 59名（所属. 宇宙航空研究開発機構宇宙科学研究所(JAXA)(ISAS): 權, 靜美), Accepted: 2018-06-08, 資料番号: SA1180097000

The Infrared Doppler (IRD) instrument is a fiber-fed high-resolution NIR spectrometer for the Subaru telescope covering the Y,J,H-bands simultaneously with a maximum spectral resolution of 70,000. The main purpose of IRD is a search for Earth-mass planets around nearby M-dwarfs by precise radial velocity measurements, as well as a spectroscopic characterization of exoplanet atmospheres. We report the current status of the instrument, which is undergoing commissioning at the Subaru Telescope, and the first light observation successfully done in August 2017. The general description of the instrument will be given including spectrometer optics, fiber injection system, cryogenic system, scrambler, and laser frequency comb. A large strategic survey mainly focused on late-type M-dwarfs is planned to start from 2019.

The reflectivity of telescope primary mirror is one of the fundamental parameters that shows the telescope performance. However, it has been difficult to obtain absolute value, especially the wide range spectroscopic performance measured in-situ on the primary mirror due to the lack of suitable measuring instrument. To overcome this challenge, we developed a portable spectrophotometer to measure the absolute spectroscopic reflectivity of telescope primary mirror. Its small dimension and light weight enable in-situ measurement on the primary mirror. This spectrophotometer covers the spectral range from 380 nm to 1000 nm with 2 nm resolution. The incident angle to the measuring surface is 12 degrees. The measurement beam size is about 12 mm in diameter. To obtain the absolute value, we adopted the principle of V-N method for the spectrophotometer. A sequential measurement also enables us to cancel the instability of the instrument. The Subaru Telescope primary mirror was recoated with Aluminum on October 20, 2017. It was the eighth coating work from its arrival at Maunakea, Hawaii in 1998 and was about four years from the previous recoating. Before the recoating work, the reflectivity measured with the spectrophotometer was 70~76 % (@400 nm), 75~80 % (@600 nm), and 73~78 % (@800 nm). The large dispersion of the reflectivity is from non-uniform contamination of the surface, especially from the accumulation of dust particles on the mirror. After the fresh coating of Aluminum, the values returned to 92.1 % (@400 nm), 90.5 % (@600 nm), and 85.8 % (@800 nm) with standard deviation less than 0.6 %. There were the data taken at the outside of the vacuum chamber right after the recoating. The great advantage of our spectrophotometer is its capability of getting absolute spectroscopic reflectivity of the primary mirror in-situ. We can continue to monitor the reflectivity of the primary mirror in-situ using this spectrophotometer, even after the primary mirror is mounted on the telescope. This helps us better understanding of the long-term reflectivity degradation.

Alignment between the primary mirror of the telescope and wide field corrector (WFC) is necessary for Prime Focus Spectrograph (PFS) ,which is the next instrument for Subaru telescope in Hawaii. From 6 defocused star images we can align the optical axis of wide field corrector to primary mirror's optical axis with required accuracy.

The Fiber Optic Cable and Connector System, FOCCoS, is a set of optical cables to feed the Prime Focus Spectrograph, PFS, for Subaru telescope [01,02]. The extremity responsible for delivering light to spectrographs is called, FCA, Fiber Cable A. Cable A is the cable installed at the Spectrograph side and consists of the Fiber Slit Assembly, FSA, the routing with its support and the Fiber Input Assembly, FIA. FSA is composed of a set of optical fibers arranged linearly on the Slit device and supported by the Frame, protected by segmented tubes and routed between strain relief boxes and the connection interface. FIA is composed by the Connector Bench (Gang Connector) that allow connection with Cable B, at the Subaru Telescope interface, to receive light from Cable C where the fibers end is coupled with microlens. As four Spectrographs are considered for PFS/Subaru, four units of Cable A are necessary. In this paper, we present in details of a complete FCA to be installed in the spectrograph bench. We discuss about the general design, methods used to manufacture the involved devices.

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less than 10 μm. The metrology camera system (MCS) serves as the optical encoder of the fiber positioners for the configuring of fibers. MCS provides the fiber positions within a 5 microns error over the 45 cm focal plane. The information from MCS will be fed into the fiber positioner control system for the closed loop control. MCS locates at the Cassegrain focus of Subaru telescope to cover the whole focal plan with one 50M pixel Canon CMOS camera. It is a 380 mm aperture Schmidt type telescope which generates uniform spot size around 10 µm FWHM across the field for reasonable sampling of the point spreading function. An achromatic lens set is designed to remove the possible chromatic error due to the variation of the LED wavelength. Carbon fiber tubes are used to provide stable structure over the operation conditions without focus adjustments. The CMOS sensor can be read in 0.8 s to reduce the overhead for the fiber configuration. The positions of all fibers can be obtained within 0.5 s after the readout of the frame. This enables the overall fiber configuration to be less than 2 minutes. MCS is installed inside a standard Subaru Cassgrain Box. All components generate heat are located inside a glycol cooled cabinet to reduce the possible image motion due to the heat. The integration of MCS started from fall 2017 and it was delivered to Subaru in April 2018. In this report, the performance of MCS after the integration and verification process in ASIAA and the performance after the delivery to Subaru telescope are presented.

The focal ratio degradation effects on optical fibers, technically referred to as FRD, has been the subject of intense studies since the beginning of the use of optical fibers in the construction of instruments applied in astronomy. A number of studies attempt to relate FRD to light loss in the optical system and other studies attempt to qualify and quantify FRD as a function of the stress induced during assembly of the structures supporting the ends of the optical fibers. In this work, we present a large-scale study to characterize FRD in all the fibers that make up the cables of the FOCCoS, Fiber Optical Cable and Connectors System project. FOCCoS, has the main function of capturing the direct light from the focal plane of Subaru Telescope using 2400 optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. Our study provides procedures and methods to analyze the effects of FRD on all cable segments for each type of termination involved. Special attention is devoted to the understanding of how angular deviations between the input surface of the fiber and the test beam can significantly influence the calculation of FRD in optical fibers.

著者人数: 55名(所属. 宇宙航空研究開発機構宇宙科学研究所(JAXA)(ISAS): 中川, 貴雄; 權, 靜美), Accepted: 2018-05-18, 資料番号: SA1180099000

PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~ 1.6-2.7Å. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project recently started undertaking the commissioning process of a subsystem at the Subaru Telescope side, with the integration and test processes of the other subsystems ongoing in parallel. We are aiming to start engineering night-sky operations in 2019, and observations for scientific use in 2021. This article gives an overview of the instrument, current project status and future paths forward.

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a multipurpose high-contrast imaging platform designed for the discovery and detailed characterization of exoplanetary systems and serves as a testbed for high-contrast imaging technologies for ELTs. It is a multi-band instrument which makes use of light from 600 to 2500nm allowing for coronagraphic direct exoplanet imaging of the inner 3 lambda/D from the stellar host. Wavefront sensing and control are key to the operation of SCExAO. A partial correction of low-order modes is provided by Subaru's facility adaptive optics system with the final correction, including high-order modes, implemented downstream by a combination of a visible pyramid wavefront sensor and a 2000-element deformable mirror. The well corrected NIR (y-K bands) wavefronts can then be injected into any of the available coronagraphs, including but not limited to the phase induced amplitude apodization and the vector vortex coronagraphs, both of which offer an inner working angle as low as 1 lambda/D. Non-common path, low-order aberrations are sensed with a coronagraphic low-order wavefront sensor in the infrared (IR). Low noise, high frame rate, NIR detectors allow for active speckle nulling and coherent differential imaging, while the HAWAII 2RG detector in the HiCIAO imager and/or the CHARIS integral field spectrograph (from mid 2016) can take deeper exposures and/or perform angular, spectral and polarimetric differential imaging. Science in the visible is provided by two interferometric modules: VAMPIRES and FIRST, which enable sub-diffraction limited imaging in the visible region with polarimetric and spectroscopic capabilities respectively. We describe the instrument in detail and present preliminary results both on-sky and in the laboratory., Comment: Accepted for publication, 20 pages, 10 figures

Spatially-resolved imaging of Herbig stars and related objects began with HST, but intensified with commissioning of high-contrast imagers on 8-m class telescopes. The bulk of the data taken from the ground have been polarized intensity imagery at H-band, with the majority of the sources observed as part of the Strategic Exploration of Exoplanets and Disks with Subaru (SEEDS) survey. Sufficiently many systems have been imaged that we discuss disk properties in scattered, polarized light in terms of groups defined by the IR spectral energy distribution. We find novel phenomena in many of the disks, including spiral density waves, and discuss the disks in terms of clearing mechanisms. Some of the disks have sufficient data to map the dust and gas components, including water ice dissociation products.

An increasing number of astronomical spectrographs employ optical fibres to collect and deliver light. For integral-field and high multiplex multi-object survey instruments, fibres offer unique flexibility in instrument design by enabling spectrographs to be located remotely from the telescope focal plane where the fibre inputs are deployed. Photon-starved astronomical observations demand optimum efficiency from the fibre system. In addition to intrinsic absorption loss in optical fibres, another loss mechanism, so-called focal ratio degradation (FRD) must be considered. A fundamental cause of FRD is stress, therefore low stress fibre cables that impart minimum FRD are essential. The FMOS fibre instrument for Subaru Telescope employed a highly effective cable solution developed at Durham University. The method has been applied again for the PFS project, this time in collaboration with a company, PPC Broadband Ltd. The process, planetary stranding, is adapted from the manufacture of large fibre-count, large diameter marine telecommunications cables. Fibre bundles describe helical paths through the cable, incorporating additional fibre per unit length. As a consequence fibre stress from tension and bend-induced ‘race-tracking’ is minimised. In this paper stranding principles are explained, covering the fundamentals of stranded cable design. The authors describe the evolution of the stranding production line and the numerous steps in the manufacture of the PFS prototype cable. The results of optical verification tests are presented for each stage of cable production, confirming that the PFS prototype performs exceptionally well. The paper concludes with an outline of future on-telescope test plans.

One of the leading direct Imaging techniques, particularly in ground-based imaging, uses a coronagraphic system and integral field spectrograph (IFS). The Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS) is an IFS that has been built for the Subaru telescope. CHARIS has been delivered to the observatory and now sits behind the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system. CHARIS has ‘high’ and ‘low’ resolution operating modes. The high-resolution mode is used to characterize targets in J, H, and K bands at R70. The low-resolution prism is meant for discovery and spans J+H+K bands (1.15-2.37 microns) with a spectral resolution of R18. This discovery mode has already proven better than 15-sigma detections of HR8799c,d,e when combining ADI+SDI. Using SDI alone, planets c and d have been detected in a single 24 second image. The CHARIS team is optimizing instrument performance and refining ADI+SDI recombination to maximize our contrast detection limit. In addition to the new observing modes, CHARIS has demonstrated a design with high robustness to spectral crosstalk. CHARIS has completed commissioning and is open for science observations.

Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is notoriously difficult to efficiently couple such devices directly with large telescopes. We demonstrate that with careful control of both the non-ideal pupil geometry of a telescope and residual wavefront errors, efficient coupling with single-mode devices can indeed be realised. A fibre injection was built within the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument. Light was coupled into a single-mode fibre operating in the near-IR (J-H bands) which was downstream of the extreme adaptive optics system and the pupil apodising optics. A coupling efficiency of 86% of the theoretical maximum limit was achieved at 1550 nm for a diffraction-limited beam in the laboratory, and was linearly correlated with Strehl ratio. The coupling efficiency was constant to within 40% for 84% of the time and >50% for 41% of the time. The laboratory results allow us to forecast that extreme adaptive optics levels of correction (Strehl ratio >90% in H-band) would allow coupling of >67% (of the order of coupling to multimode fibres currently). For Strehl ratios, 15 pages, 16 figures, 1 table, published in A&A

We present the data reduction pipeline for CHARIS, a high-contrast integral-field spectrograph for the Subaru Telescope. The pipeline constructs a ramp from the raw reads using the measured nonlinear pixel response, and reconstructs the data cube using one of three extraction algorithms: aperture photometry, optimal extraction, or $\chi^2$ fitting. We measure and apply both a detector flatfield and a lenslet flatfield and reconstruct the wavelength- and position-dependent lenslet point-spread function (PSF) from images taken with a tunable laser. We use these measured PSFs to implement a $\chi^2$-based extraction of the data cube, with typical residuals of ~5% due to imperfect models of the undersampled lenslet PSFs. The full two-dimensional residual of the $\chi^2$ extraction allows us to model and remove correlated read noise, dramatically improving CHARIS' performance. The $\chi^2$ extraction produces a data cube that has been deconvolved with the line-spread function, and never performs any interpolations of either the data or the individual lenslet spectra. The extracted data cube also includes uncertainties for each spatial and spectral measurement. CHARIS' software is parallelized, written in Python and Cython, and freely available on github with a separate documentation page. Astrometric and spectrophotometric calibrations of the data cubes and PSF subtraction will be treated in a forthcoming paper., Comment: 18 pages, 15 figures, 3 tables, replaced with JATIS accepted version (emulateapj formatted here). Software at https://github.com/PrincetonUniversity/charis-dep and documentation at http://princetonuniversity.github.io/charis-dep

We present a visible multi-band photometry of trans-Neptunian objects (TNOs) observed by the Subaru Telescope in the framework of Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) from March in 2014 to September in 2016. We measured the five broad-band (g, r, i, z, and Y) colors over the wavelength range from 0.4 um to 1.0 um for 30 known TNOs using the HSC-SSP survey data covering ~500 deg2 of sky within +/-30 deg of ecliptic latitude. This dataset allows us to characterize the dynamical classes based on visible reflectance spectra as well as to examine the relationship between colors and the other parameters such as orbital elements. Our results show that the hot classical and scattered populations share similar color distributions, while the cold classical population has a reflective decrease toward shorter wavelength below the i band. Based on the obtained color properties, we found that the TNO sample examined in the present work can be separated into two groups by inclination (I), the low-I population consisting of cold classical objects and high-I population consisting of hot classical and scattered objects. The whole sample exhibits an anti-correlation between colors and inclination, but no significant correlation between colors and semi-major axis, perihelion distance, eccentricity, or absolute magnitude. The color-inclination correlation does not seem to be continuous over the entire inclination range. Rather, it is seen only in the high-I population. We found that the low- and high-I populations are distinguishable in the g-i vs. eccentricity plot, but four high-I objects show g-i colors similar to those of the low-I population. If we exclude these four objects, the high-I objects show a positive correlation between g-i and eccentricity and a negative correlation between g-i and inclination with high significance levels., Comment: 29 pages, 11 figure, 5 tables, submitted to HSC special issue in PASJ

The reflectivity of a telescope primary mirror is one of the fundamental parameters that determines the telescope performance. Due to a lack of suitable instruments, however, measuring the absolute value of the reflectivity, in particular wide spectral measurements in-situ, has been almost impossible. To solve this problem, we developed a portable spectrophotometer called the Subaru Portable Spectrophotometer (SPS). SPS covers a spectral range between 380 and 1000 nm with a resolution of 2 nm. Its dimension and weight enable in-situ measurement on the primary mirror. A modified V-N method is applied to SPS for obtaining the absolute reflectivity. A sequential measurement makes SPS compensate the instrumental drift. The great advantage of SPS is its capability of getting absolute spectral reflectivity in-situ, even after the primary mirror is mounted on a telescope. In the case of Subaru Telescope, SPS clarified the reflectivity of the primary mirror coated with aluminum 4 years ago. Periodic measurements have been on-going since the primary mirror recoating in 2017. It is now possible to study the telescope reflectivity degradation with SPS.

We report the direct imaging detection of a low-mass companion to a young, moderately active star V450 And, that was previously identified with the radial velocity method. The companion was found in high-contrast images obtained with the Subaru Telescope equipped with the HiCIAO camera and AO188 adaptive optics system. From the public ELODIE and SOPHIE archives we extracted available high-resolution spectra and radial velocity (RV) measurements, along with RVs from the Lick planet search program. We combined our multi-epoch astrometry with these archival, partially unpublished RVs, and found that the companion is a low-mass star, not a brown dwarf, as previously suggested. We found the best-fitting dynamical masses to be $m_1=1.141_{-0.091}^{+0.037}$ and $m_2=0.279^{+0.023}_{-0.020}$ M$_\odot$. We also performed spectral analysis of the SOPHIE spectra with the iSpec code. The Hipparcos time-series photometry shows a periodicity of $P=5.743$ d, which is also seen in SOPHIE spectra as an RV modulation of the star A. We interpret it as being caused by spots on the stellar surface, and the star to be rotating with the given period. From the rotation and level of activity, we found that the system is $380^{+220}_{-100}$ Myr old, consistent with an isochrone analysis ($220^{+2120}_{-90}$ Myr). This work may serve as a test case for future studies of low-mass stars, brown dwarfs and exoplanets by combination of RV and direct imaging data., 15 pages, 9 figures, 7 tables, to appear in ApJ

During the past year, the Multi-Object InfraRed Camera and Spectrograph at Subaru has undergone an upgrade of its science detectors, the housekeeping electronics and the instrument control software. This overhaul aims at increasing MOIRCS' sensitivity, observing efficiency and stability. Here we present the installation and the alignment procedure of the two Hawaii 2RG detectors and the design of a cryogenic focus mechanism. The new detectors show significantly lower read noise, increased quantum efficiency, and lower the readout time.

In 2014 and 2015 the Multi-Object InfraRed Camera and Spectrograph (MOIRCS) instrument at the Subaru Telescope on Maunakea is underwent a significant modernization and upgrade project. We upgraded the two Hawaii2 detectors to Hawaii2-RG models, modernized the cryogenic temperature control system, and rewrote much of the instrument control software. The detector upgrade replaced the Hawaii2 detectors which use the Tohoku University Focal Plane Array Controller (TUFPAC) electronics with Hawaii2-RG detectors using SIDECAR ASIC (a fully integrated FPA controller system-on-a-chip) and a SAM interface card. We achieved an improvement in read noise by a factor of about 2 with this detector and electronics upgrade. The cryogenic temperature control upgrade focused on modernizing the components and making the procedures for warm up and cool down of the instrument safer. We have moved PID control loops out of the instrument control software and into Lakeshore model 336 cryogenic temperature controllers and have added interlocks on the warming systems to prevent overheating of the instrument. Much of the instrument control software has also been re-written. This was necessitated by the different interface to the detector electronics (ASIC and SAM vs. TUFPAC) and by the desire to modernize the interface to the telescope control software which has been updated to Subaru's "Gen2" system since the time of MOIRCS construction and first light. The new software is also designed to increase reliability of operation of the instrument, decrease overheads, and be easier for night time operators and support astronomers to use.

We describe the design and performance of the SuMIRe Prime Focus Spectrograph (PFS) visible camera cryostats. SuMIRe PFS is a massively multi-plexed ground-based spectrograph consisting of four identical spectrograph modules, each receiving roughly 600 fibers from a 2394 fiber robotic positioner at the prime focus. Each spectrograph module has three channels covering wavelength ranges 380~nm -- 640~nm, 640~nm -- 955~nm, and 955~nm -- 1.26~um, with the dispersed light being imaged in each channel by a f/1.07 vacuum Schmidt camera. The cameras are very large, having a clear aperture of 300~mm at the entrance window, and a mass of $\sim$280~kg. In this paper we describe the design of the visible camera cryostats and discuss various aspects of cryostat performance.

MIMIZUKU is the first-generation mid-infrared instrument for the university of Tokyo Atacama Observatory (TAO) 6.5-m telescope. MIMIZUKU provides imaging and spectroscopic monitoring capabilities in a wide wavelength range from 2 to 38 μm, including unique bands like 2.7-μm and 30-μm band. Recently, we decided to add spectroscopic functions, KL-band mode (λ= 2.1-4.0 μm; R =λ/Δλ ~ 210) and 2.7-μm band mode ( λ= 2.4-2.95 μm; R ~ 620), and continuous spectroscopic coverage from 2.1 to 26 μm is realized by this update. Their optical designing is completed, and fabrications of optical elements are ongoing. As recent progress, we also report the completion of the cryogenic system and optics. The cryogenic system has been updated by changing materials and structures of thermal links, and the temperatures of the optical bench and detector mounting stages finally achieved required temperatures. Their stability against instrument attitude is also confirmed through an inclination test. As for the optics, its gold-plated mirrors have been recovered from galvanic corrosion by refabrication and reconstruction. Enough image quality and stability are confirmed by room-temperature tests. MIMIZUKU is intended to be completed in this autumn, and commissioning at the Subaru telescope and scientific operations on the TAO telescope are planned in 2017 and around 2019, respectively. In this paper, these development activities and future prospects of MIMIZUKU are reported.

The Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS) is an integral field spectrograph (IFS) that has been built for the Subaru telescope. CHARIS has two imaging modes; the high-resolution mode is R82, R69, and R82 in J, H, and K bands respectively while the low-resolution discovery mode uses a second low-resolution prism with R19 spanning 1.15-2.37 microns (J+H+K bands). The discovery mode is meant to augment the low inner working angle of the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) adaptive optics system, which feeds CHARIS a coronagraphic image. The goal is to detect and characterize brown dwarfs and hot Jovian planets down to contrasts five orders of magnitude dimmer than their parent star at an inner working angle as low as 80 milliarcseconds. CHARIS constrains spectral crosstalk through several key aspects of the optical design. Additionally, the repeatability of alignment of certain optical components is critical to the calibrations required for the data pipeline. Specifically the relative alignment of the lens let array, prism, and detector must be highly stable and repeatable between imaging modes. We report on the measured repeatability and stability of these mechanisms, measurements of spectral crosstalk in the instrument, and the propagation of these errors through the data pipeline. Another key design feature of CHARIS is the prism, which pairs Barium Fluoride with Ohara L-BBH2 high index glass. The dispersion of the prism is significantly more uniform than other glass choices, and the CHARIS prisms represent the first NIR astronomical instrument that uses L-BBH2as the high index material. This material choice was key to the utility of the discovery mode, so significant efforts were put into cryogenic characterization of the material. The final performance of the prism assemblies in their operating environment is described in detail. The spectrograph is going through final alignment, cryogenic cycling, and is being delivered to the Subaru telescope in April 2016. This paper is a report on the laboratory performance of the spectrograph, and its current status in the commissioning process so that observers will better understand the instrument capabilities. We will also discuss the lessons learned during the testing process and their impact on future high-contrast imaging spectrographs for wavefront control.

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less than 10 microns. The metrology camera system (MCS) serves as the optical encoder of the fiber motors for the configuring of fibers. MCS provides the fiber positions within a 5 microns error over the 45 cm focal plane. The information from MCS will be fed into the fiber positioner control system for the closed loop control. MCS will be located at the Cassegrain focus of Subaru telescope in order to cover the whole focal plane with one 50M pixel Canon CMOS camera. It is a 380mm Schmidt type telescope which generates a uniform spot size with a ~10 micron FWHM across the field for reasonable sampling of the point spread function. Carbon fiber tubes are used to provide a stable structure over the operating conditions without focus adjustments. The CMOS sensor can be read in 0.8s to reduce the overhead for the fiber configuration. The positions of all fibers can be obtained within 0.5s after the readout of the frame. This enables the overall fiber configuration to be less than 2 minutes. MCS will be installed inside a standard Subaru Cassgrain Box. All components that generate heat are located inside a glycol cooled cabinet to reduce the possible image motion due to heat. The optics and camera for MCS have been delivered and tested. The mechanical parts and supporting structure are ready as of spring 2016. The integration of MCS will start in the summer of 2016. In this report, the performance of the MCS components, the alignment and testing procedure as well as the status of the PFS MCS will be presented.