Search

Purpose This study aimed to examine the prosthetic orientations, limb alignment, intraoperative soft tissue balance, and early clinical outcomes associated with the use of the relatively new handheld robot technique compared to those associated with the use of the conventional alignment guide for bi-cruciate stabilized total knee arthroplasty (TKA). Methods This retrospective cohort study compared the prosthetic orientation and limb alignment of 35 patients who underwent TKA using robotic assistance (robot group) with those of patients who underwent TKA using a conventional alignment guide (control group). The coronal femoral component alignment (FCA), coronal tibial component alignment (TCA), and the hip-knee-ankle (HKA) angle were compared between groups. Intraoperative soft tissue balance, including the joint component gap and varus/valgus balance assessed by an offset-type tensor, were also compared between groups. One year postoperatively, the clinical outcomes, including the range of motion and 2011 Knee Society Score (KSS), were compared between groups. Results The HKA angle and FCA were 0.1° varus and 0.1° varus, respectively, in the robot group and 1.3° varus and 1.3° varus, respectively, in the control group. The difference in the HKA angle and the FCA, but not the TCA, between groups was statistically significant (p Conclusion The accuracy of the implantations and stable soft tissue balance in the robot group were superior to those of the control group. The robot group also had superior patient-reported scores for early clinical outcomes.

This study aimed to evaluate the relationship between the radiographical features of combination of the acetabular coverage and the femoral head-neck shape and the occurrence of femoroacetabular impingement (FAI). In this study, 114 patients who had FAI with or without labral tear and mild osteoarthritis were analyzed. Plain radiographs and computed tomography (CT) were taken for evaluation of acetabular coverage and femoral head-neck measurements. The relationship between the combination angle of acetabular coverage and femoral head-neck measurements and the occurrence of FAI was evaluated. The prevalence of FAI patients with the combination angle of CT-anterior CE + α angle ≥100° was 6.1% (7/114 patients). Receiver operator characteristic curve analysis demonstrated a higher area under the curve for combination of CT-anterior center edge angle (ACEA) with the α angle at 0.94 (CT-ACEA +α angle). A threshold for the occurrence of FAI was determined using the combination CT-ACEA + α angle at 100°. The frequency of FAI surgery was significantly higher in patients with a combination angle ≥100° than in those with a smaller angle. The average modified Harris hip score was significantly lower in patients with a combination angle ≥100° than in those with a smaller angle. We suggest that the combination of lateral center edge angle ≥40°, α angle ≥50° and combined angles of CT-ACEA and α angle ≥100° may help diagnosis of FAI. Level of evidence III: retrospective cohort study.

JOURNEY II bi-cruciate stabilized (BCS) knee system, a guided motion total knee arthroplasty (TKA), has been reported to reproduce physiological knee kinematic motion with good clinical outcomes. However, this guided system may be sensitive to the femorotibial rotational alignment.Forty-four patients (50 knees) who underwent JOURNEY II BCS TKA were included in this retrospective study. The 2011 Knee Society Score (KSS) and range of motion were assessed pre-operatively and one year postoperatively. The femoral component rotational angle relative to the surgical epicondylar axis and the tibial component rotational angle relative to Akagi's line were measured postoperatively. The absolute difference between the femoral and tibial component rotational angles was defined as femorotibial component rotational mismatch. The correlation between the parameters of these rotational alignments and postoperative clinical outcomes was evaluated. Additionally, receiver operating characteristic curve analysis was performed to determine the optimal cut-off point of the femorotibial component rotational mismatch.Mean femoral and tibial component rotational angles were 0.4° (internal rotation) and 0.7° (external rotation), respectively. The rotational mismatch of the femorotibial component was 3.2°. There were negative correlations between femorotibial rotational mismatch and clinical outcomes, including objective knee indicators, patient satisfaction, functional activities, and total 2011 KSS. The area under the curve of the femorotibial component rotational mismatch was 0.768 and the cut-off value identified by the Youden index was 2.8°.Excessive rotational mismatch between the femoral and tibial components can negatively influence the clinical outcomes of JOURNEY II BCS TKA.

Purpose This study aimed to evaluate kinematically aligned total knee arthroplasty (KA-TKA) targeting the neutral ground mechanical axis (MA) (hip-to-calcaneus axis), the line from the hip centre to the bottom of the calcaneus, (ground KA-TKA) in terms of its comparison with tibia-restricted modified KA-TKA (modified KA-TKA). Methods This retrospective cohort study included 106 consecutive patients who underwent unilateral KA-TKA for varus osteoarthritis (OA) (60 modified KA-TKAs and 46 ground KA-TKAs). After 1:1 propensity score matching, 60 patients (30 pairs) were matched between the groups with comparable demographic data. The hip-knee-ankle (HKA) angle, coronal femoral component alignment (FCA), and coronal tibial component alignment (TCA) were compared between groups. Intraoperative soft tissue balance, including the joint component gap and varus/valgus balance, was also compared between the groups. One year postoperatively, the clinical outcomes, including the range of motion and 2011 Knee Society Score, were compared between groups. Results The HKA angle and FCA/TCA were not significantly different between groups. Whereas the varus/valgus balance showed no significant differences between groups, smaller joint component gaps were found throughout the range of motion in the ground KA-TKA group than in the modified KA-TKA group. Despite no difference in clinical scores between groups, a significantly deeper postoperative flexion angle was achieved in the ground KA-TKA group than in the modified KA-TKA group (p Conclusion Targeting neutral ground MA in KA-TKA for patients with varus OA has the potential to provide a better flexion angle with stable intraoperative soft tissue balance.

Background The stromal-vascular fraction (SVF), comprising heterogeneous cell populations and adipose-derived stem cells (ADSCs), has therapeutic potential against osteoarthritis (OA); however, the underlying mechanism remains elusive. This study investigated the therapeutic effects of the heterogeneous cells in rabbit SVF on rabbit chondrocytes and compared them with those of two different ADSCs adjusted for their stem cell content.Methods Animals were divided into control, low-dose ADSCs (lADSC; 1×104 ADSCs), high-dose ADSCs (hADSC; 1×105 ADSCs), and SVF (1×105 SVF) groups. SVF and ADSCs isolated from rabbits were autografted into the knees after OA onset, and the animals were sacrificed 8 and 12 weeks after OA onset. OA progression and synovitis was analyzed by macroscopic and histological analyses, and the expression of collagen type II, SOX9, MMP-13, CD86 (M1) and CD163 (M2) was assessed using immunohistochemical and real-time polymerase chain reaction (RT-PCR). In vitro, chondrocytes were either co-cultured with SVF or lADSCs or alone (control), and the pellet size was evaluated. TGF-β and IL-10 concentrations in the medium were evaluated using an enzyme-linked immunosorbent assay. Additionally, immune-fluorescent double staining was performed for SVF and lADSCs to stain macrophages with F4/80, CD86, and CD163.Results OA progression was significantly suppressed, and synovitis was reduced in the SVF and hADSC groups. Compared to those in the control and lADSC groups, immunohistochemistry and RT-PCR revealed higher expression of collagen type Ⅱ and SOX9, lower expression of MMP-13 in cartilage, lower macrophage M1/M2 ratio, and higher expression of TGF-β, IL-10 in the synovium in the SVF and the hADSC groups. In the SVF group, the pellet size and TGF-β and IL-10 concentrations were significantly higher than those in the control and lADSC groups. Immune-fluorescent double staining revealed a significantly higher number of M2 than M1 macrophages in SVF.Conclusions The therapeutic effects of SVF and hADSCs superior on chondrocytes was superior with enhanced anabolic and inhibited catabolic factors than those of controls and lADSCs. Heterogeneous cells, mainly M2 macrophages in SVF, contributed to the therapeutic effect on chondrocytes and knee joint homeostasis by enhancing the growth factors and chondrocyte protective cytokines secretion.

The adipose-derived stromal vascular fraction (SVF) is composed of a heterogeneous mix of adipose-derived stem cells (ADSCs), macrophages, pericytes, fibroblasts, blood, and other cells. Previous studies have found that the paracrine effects of SVF cells may be therapeutic, but their role in osteoarthritis treatment remains unclear. This study aimed to investigate the therapeutic effect of SVF cells on chondrocytes. Chondrocytes were seeded on culture plates alone (control) or cocultured with SVF or ADSCs on cell culture inserts. After 48 h of coculture, chondrocyte collagen II, tissue inhibitors of metalloproteinases-3 (TIMP-3), and matrix metalloproteinases-13 (MMP-13) messenger RNA (mRNA) expression levels were evaluated using reverse-transcription polymerase chain reaction, and the transforming growth factor-β (TGF-β) levels in the supernatant were measured using ELISA. Immunohistochemical staining and flow cytometry were used to evaluate the macrophages in the SVF. These macrophages were characterized according to phenotype using the F4/80, CD86, and CD163 markers. To determine whether the Smad2/3 signaling pathways were involved, the chondrocytes were pre-treated with a Smad2/3 phosphorylation inhibitor and stimulated with the SVF, and then Smad2/3 phosphorylation levels were analyzed using western blot. The mRNA expression levels of various paracrine factors and chondrocyte pellet size were also assessed. Collagen II and TIMP-3 expression were higher in the SVF group than in the ADSC group and controls, while MMP-13 expression was the highest in the ADSC group and the lowest in the controls. TGF-β levels in the SVF group were also elevated. Immunohistochemical staining and flow cytometry revealed that the macrophages in the SVF were of the anti-inflammatory phenotype. Western blot analysis showed that the SVF increased Smad2/3 phosphorylation, while Smad2/3 inhibitors decreased phosphorylation. Smad2/3 inhibitors also reduced the expression of various other paracrine factors and decreased chondrocyte pellet size. These findings suggested that the paracrine effect of heterogeneous cells, such as anti-inflammatory macrophages, in the SVF partly supports chondrocyte regeneration through TGF-β-induced Smad2/3 phosphorylation.

Hairdresser dystonia is one of the occupational dystonias and task-specific movement disorders occurring as a result of long-term repetitive cutting with scissors. The task-specific dystonia manifests itself as a loss of voluntary motor control during extensive practice of cutting requiring a high level of technical proficiency. The prevalence rate of hairdresser dystonia is not well-known worldwide. A questionnaire regarding dystonia was prepared for hairdressers. After sending the questionnaires to 800 hairdressers by direct mail, 134 answers were received by mail. Five of the 134 were suspected to have hairdresser-associated focal dystonia. Thus, 3.7% of hairdressers might have task-specific dystonia. This report was limited because of the small number of participants. However, this research is valuable because it was difficult to find a patient with suspected dystonia due to concerns related to job security.

The aim of this study was to evaluate the association between labral length and radiographic parameters of lateral and anterior acetabular coverage and the femoro-epiphyseal acetabular roof (FEAR) index in patients with developmental dysplasia of the hip (DDH).We retrospectively analyzed data from patients with DDH who visited our hip joint clinic for the first time due to hip symptoms. DDH presence was defined as a lateral center-edge angle (LCEA) of ≤25°. The labral lengths on the anterior and lateral sides were measured on central axial and central coronal slices of T1-weighted magnetic resonance imaging, respectively. The Pearson correlation coefficients (r) and simple linear regression analyses were performed to determine the association of the lateral and anterior labral lengths with the radiographic parameters, including the LCEA, acetabular roof obliquity, FEAR index, anterior wall index, and vertical center anterior angle.This study included 88 patients, with a mean age of 39.6 ± 11.8 years. There were 65 women and 23 men. The lateral and anterior labral lengths correlated with all parameters of dysplasia. Specifically, the lateral labral length had a strong positive correlation with the FEAR index (R = 0.65, P.001). The anterior labral length had a strong negative correlation with the anterior wall index (R = -0.66, P.001).The lateral labral length had a strong positive correlation with the FEAR index. Furthermore, the anterior labral length had a correlation with the anterior dysplasia.Level III, retrospective cross-sectional study.

The aim of this simulation study was to evaluate the relationship of elements of anterior acetabular coverage and femoral head-neck shape with the occurrence of postoperative anterior impingement after curved periacetabular osteotomy (PAO). Sixty-two patients with symptomatic developmental dysplasia of the hip who had undergone curved PAO were selected. The likelihood of developing postoperative anterior impingement was explored through simulations of the range of motion by collision detection of the pelvis and femur. Postoperative anterior impingement was defined as impingement that occurred during postoperative bone flexion105° or postoperative internal rotation20° at 90° flexion. The three-dimensional center-edge (CE) angles, acetabular and femoral versions, radiographic alpha angles of the femoral head, combination angles of anterior CE and alpha angles, and combined anteversions of acetabular and femoral versions were compared between patients with postoperative anterior impingement and nonimpingement. A receiver operator characteristic (ROC) analysis was conducted to determine thresholds of the examined radiographic parameters and calculate their accuracy for predicting postoperative anterior impingement. A multivariate analysis was performed to test whether combined anteversion, anterior CE angle, and combination angle are associated with excellent modified Harris Hip Scores (mHHSs). ROC analysis demonstrated a combination angle ≥108° was predictive of the occurrence of postoperative anterior impingement after curved PAO, which can lead to impaired clinical outcomes. Conversely, a combination angle108° was significantly associated with mHHS ≥ 90 points. To avoid postoperative anterior impingement, osteochondroplasty of the femoral head or anterior CE angle control should be performed for patients with preoperative combination angles ≥90°.

Purpose Assessment of the conventional mechanical axis (MA) (hip-to-talus axis) is reported to result in constitutional varus in the native knee. However, the ground MA (hip-to-calcaneus axis), which is the line from the hip center to the bottom of the calcaneus, passes through the center of the knee joint in the native knee and is a possible alternative target for total knee arthroplasty (TKA) assessments. Therefore, this study aimed to present a “ground kinematically aligned (KA)-TKA.” In this technique, the femoral component is placed on the cylindrical axis using the calipered technique and the tibial component is placed to give a neutral ground MA. Radiographical investigation was used to determine whether physiological alignment can be individually achieved with ground KA-TKA; this was compared with that of a tibia-restricted modified KA-TKA, referring to conventional MA (hip-to-talus axis) results. Methods As the primary endpoint, this prospective cohort study compared the ground MA ratios of the knee joints in 40 ground KA-TKAs (G group: Coronal Plain Alignment of the Knee (CPAK) 28 type I, 7 II, 1 IV, and 4 V) with those of the preceding 60 modified KA-TKAs (M group: CPAK 46 type I, 12 II, and 2 V) performed for patients with varus osteoarthritis (OA). The number of outliers differing over ± 5% from the neutral were compared between groups using the χ2-test. The Hip–knee–ankle (HKA) angle, coronal femoral/tibial component alignment (FCA/TCA), and joint line orientation angle (JLOA) were compared between the groups using non-paired t-tests. Statistical significance was set at p Results The G group had a higher ratio of the ground MA passing through the knee center than the M group did; outliers differing over ± 5% from the neutral of the ground MA were 2/40 cases in the G group and 20/60 cases in the M group, which was a significant difference (p = 0.001). The HKA angle, FCA/TCA, and JLOA were not significantly different between the groups. Conclusions Targeting the ground MA in KA-TKA for patients with varus OA was feasible and has the potential to provide a physiological alignment more similar to the native knee in TKA than other kinematic alignment techniques. Level of evidence Level III.

Aims This study aimed to evaluate the accuracy of implant placement with robotic-arm assisted total hip arthroplasty (THA) in patients with developmental dysplasia of the hip (DDH). Methods The study analyzed a consecutive series of 69 patients who underwent robotic-arm assisted THA between September 2018 and December 2019. Of these, 30 patients had DDH and were classified according to the Crowe type. Acetabular component alignment and 3D positions were measured using pre- and postoperative CT data. The absolute differences of cup alignment and 3D position were compared between DDH and non-DDH patients. Moreover, these differences were analyzed in relation to the severity of DDH. The discrepancy of leg length and combined offset compared with contralateral hip were measured. Results The mean values of absolute differences (postoperative CT-preoperative plan) were 1.7° (standard deviation (SD) 2.0) (inclination) and 2.5° (SD 2.1°) (anteversion) in DDH patients, and no significant differences were found between non-DDH and DDH patients. The mean absolute differences for 3D cup position were 1.1 mm (SD 1.0) (coronal plane) and 1.2 mm (SD 2.1) (axial plane) in DDH patients, and no significant differences were found between two groups. No significant difference was found either in cup alignment between postoperative CT and navigation record after cup screws or in the severity of DDH. Excellent restoration of leg length and combined offset were achieved in both groups. Conclusion We demonstrated that robotic-assisted THA may achieve precise cup positioning in DDH patients, and may be useful in those with severe DDH. Cite this article: Bone Joint Res 2021;10(10):629–638.

PURPOSE: To evaluate the relationship between morphological differences in labral tears and clinical features of the hip joint in patients who underwent hip arthroscopy. MATERIALS AND METHODS: We retrospectively analyzed data from patients who underwent arthroscopic surgery for the treatment of labral tears. Hip labral tears were morphologically classified as longitudinal peripheral tears (group L), radial fibrillated tears (group FI), radial flaps (group FL), and an unstable labrum (group U). Radiographically, the center–edge angle, acetabular roof obliquity, vertical-center-anterior angle, alpha angle, femoral head-neck offset ratio, and crossover sign were evaluated and compared among the groups. The relationship between labral morphology and these radiographic findings, as well as clinical findings, such as age, gender, preoperative range of hip motion, and the clinical outcomes using modified Harris Hip Score (mHHS) were also examined. RESULTS: This study included fifty patients. Groups L and FI were often observed in late middle-aged patients with relatively shallow acetabular coverage. Group FL tears were frequently observed in young males with radiographic features, such as femoroacetabular impingement (FAI), compared to the other groups. Group U comprised mostly young females with relatively shallow acetabular coverage compared to the other groups. For the postoperative mHHS, group FL showed the best score among all groups, with a significant difference between groups FL and FI (p = 0.034). CONCLUSIONS: Our study revealed that morphologically, different labral tears were associated with different clinical features and radiological findings. Especially, our study can provide predictive findings for hip arthroscopists that younger males with FAI show better clinical outcomes when compared to middle-aged females with shallow acetabulum, which is indicative of degenerative hip labral tears. LEVEL OF EVIDENCE: IV case series.

Background Many factors have been reported to affect postoperative range of knee flexion after total knee arthroplasty (TKA); however, no study has reported the impact of preoperative range of motion of the hip to the postoperative flexion angle of the knee thus far. Methods Of 38 consecutive patients who underwent posterior-stabilized TKA, we assessed 21 patients after excluding 17 patients who met exclusion criteria. The range of motion of the knee and the hip, age, body-mass index, serum albumin level, HbA1c, Kellgren-Lawrence grade, knee extension strength and radiological femorotibial angle as well as postoperative knee flexion angle at three months were evaluated. The preoperative data and the knee flexion angle at three months after TKA were compared using Spearman's rank correlation coefficient. Results Knee flexion angle at three months after TKA was positively correlated with preoperative flexion (rho = 0.616, p = 0.007) and external rotation angle (rho = 0.576, p = 0.012) of the hip as well as preoperative knee flexion angle (rho = 0.797, p = 0.001). There were no correlations between postoperative knee flexion angle and other preoperative data. Conclusions Patients with restricted flexion and/or external rotation of the hip may have contractures of Gluteus maximus, Gluteus medius and Tensor fasciae latae, which can cause hypertension of iliotibial tract. It may cause decreased internal rotation of the tibia when the knee is flexed, which affects postoperative knee flexion angle, thus limited flexion and/or external rotation of the hip might restrict knee flexion angle following TKA.

The aim of the study is to explore and compare the differences in trochlear shape and knee anatomy between four types of prostheses and preoperative native knee matched with preoperative computed tomography (CT). Thirty patients were scheduled for primary kinematically aligned total knee arthroplasty (TKA) for varus knee osteoarthritis at our hospital and the region between their pelvis to ankle joint was simulated using a CT-based three-dimensional planning software. The axial plane containing the transepicondylar axis was set as Slice A, and the 10-mm distal plane from Slice A was set as Slice B. The distances to the deepest trochlear groove between the native knee and each prosthesis and the medial and lateral facet heights were compared among the four groups. The deepest femoral trochlear groove of the prostheses was located 1.6 to 3.0 mm more medial than that of the native knee, and in the Persona group, it was significantly more medial than in the e-motion or Triathlon groups on both Slices A and B. The native knee and the medial and lateral facet heights of the four prostheses on both Slices A and B were significantly lower than those of preoperative native knees when femoral prostheses were set in the kinematically aligned (KA)-TKA position. The deepest point of the trochlear groove of the Persona group was the most medial among the four prostheses studied, and the deepest points differed depending on the prosthesis design in KA-TKA. Thus, surgeons should carefully select the type of prostheses used in KA-TKA.

This study compared the accuracy of three dimensional (3D) mini-optical navigation and accelerometer-based portable navigation systems for cup positioning during a total hip arthroplasty (THA) in the supine position.This retrospective cohort study assessed data for 77 hips using 3D mini-optical navigation (n = 37) and accelerometer-based portable navigation (n = 40). The patients underwent THA through the mini-anterolateral approach in the supine position using a portable navigation system. We assessed the preoperative target angles, recorded intraoperative cup angles, postoperative CT imaging angles, cup angle measurement errors, and other clinical parameters.The mean absolute differences in radiographic inclination were similar between 3D mini-optical navigation and accelerometer-based portable navigation systems during THA in the supine position (2.8° ± 1.7° vs 2.8° ± 1.9°, p = 0.637). The mean absolute differences in radiographic anteversion were also similar (2.6° ± 2.3° vs 2.5° ± 1.9°, p = 0.737). Cup malalignment (absolute difference of inclination or anteversion between postoperative CT and preoperative target angle of 5°) was significantly associated with body mass index (BMI) in accelerometer-based portable navigation but not in 3D mini-optical navigation.This is the first study to compare the accuracy of cup positioning between 3D mini-optical and accelerometer-based navigations in THA in the supine position. Both portable navigation systems accurately identified the orientation of cup placement. The accuracy of 3D mini-optical navigation is not affected by high BMI and may be preferred over other options in such patients.

Introduction Kinematically aligned total knee arthroplasty (KA-TKA) has gained interest for achieving more favorable clinical outcomes than mechanically aligned TKA. One of the advantages of KA-TKA is reported to be an easy acquisition of intraoperative soft-tissue balance without excessive medial release for varus osteoarthritis. However, we hypothesized that the prosthesis type affects intraoperative soft-tissue balance even in the KA-TKA. The present study aimed to compare intraoperative soft-tissue balance and clinical outcomes of KA-TKAs using single-radius (SR) or multiradius (MR) prostheses. Materials and Methods Consecutive 70 cruciate-retaining modified KA-TKAs (31 SR and 39 MR) were performed in patients with varus-type osteoarthritis using a navigation system. Intraoperative soft-tissue balance including joint component gap and varus/valgus balance was measured with femoral component placement and patellofemoral joint reduction throughout the range of motion using offset-type tensor and compared between the two groups. Two years postoperatively, the range of motion and 2011 Knee Society Scores were compared between the two groups. Results and Conclusion Joint component gaps showed no significant differences between the two groups from 0 to 30 degrees of flexion. However, during 60 to 120 degrees of flexion, joint component gaps of SR group showed significantly larger values than those of MR group (p Interpretation Despite no difference in clinical outcomes, joint component gap showed different patterns due to the prosthesis type in modified KA-TKAs.

Background The relationship between the femoral component design in total knee arthroplasty (TKA) and the patellofemoral contact force, as well as the soft tissue balance, has not been well reported thus far. Methods Twenty-eight mobile-bearing posterior-stabilized (PS) TKAs using the traditional model (PFC Sigma) and 27 mobile-bearing PS TKAs using the latest model (Attune) were included. Surgeries were performed using the measured resection technique assisted with the computed tomography (CT)-based free-hand navigation system. After all the trial components were placed, patellar contact forces on the medial and lateral sides were measured using two uniaxial ultrathin force transducers with the knee at 0°, 10°, 30°, 60°, 90°, 120°, and 135° of flexion. The joint component gap and the varus ligament balance of the femorotibial joint were also measured. The non-paired Student’s t-test was conducted to compare the values of the two groups. Results The medial patellar contact force was significantly lower for Attune group than for PFC Sigma group at 120° of knee flexion (P = 0.0058). The lateral patellar contact force was also significantly lower for Attune group than PFC Sigma group at 120° and 135° of knee flexion (P = 0.0068 and P = 0.036). The joint component gap, as well as the varus ligament balance, showed no statistically significant difference between the two groups. Conclusions Reduced thickness and width of the anterior flange of the femoral component in the Attune may play a role in low patellar contact force.

Tibial plateau fractures are serious complications of Oxford mobile-bearing unicompartmental knee arthroplasty (OUKA). This study examined where the fracture lines arises and evaluated the keel–cortex distances (KCDs) using three-dimensional computed tomography (3D-CT) and the effects of technical error (assessed by tibial component positions) and proximal tibial morphology on the KCDs. This retrospective study included 217 OUKAs with cementless tibial components. Fifteen patients had tibial fractures after surgery. Anterior and posterior KCDs and fracture line origins were assessed using 3D-CT postoperatively. Proximal tibial morphology was assessed using the medial eminence line (MEL), which runs parallel to the tibial axis and passes through the tip of the medial intercondylar eminence of the tibia on long-leg anteroposterior radiograph. Knees had overhanging medial tibial condyle if the MEL passed medially to the medial tibial cortex. KCDs were compared between patients with/without fractures. Tibial component positions were evaluated, considering effects of tibial morphologies and component positions on fracture prevalence and KCDs. Fracture lines were found between the keel and posterior cortex in 12/15 patients. Posterior KCDs were significantly shorter in patients with fractures than in patients without (2.7 ± 1.6 mm vs 5.2 ± 1.7 mm, P

This study aimed to investigate the accuracy of cup placement and determine the predictive risk factors for inaccurate cup positioning in robot-assisted total hip arthroplasty (THA). We retrospectively analyzed 115 patients who underwent robot-assisted THA between August 2018 and November 2019. Acetabular cup alignment and three-dimensional (3D) position were measured using pre- or postoperative computed tomography (CT) data. Absolute differences in cup inclination, anteversion, and 3D position were assessed, and their relation to preoperative factors was evaluated. The average measurement of the absolute differences was 1.8° ± 2.0° (inclination) and 1.9° ± 2.3° (anteversion). The average absolute difference in the 3D cup position was 1.1 ± 1.2 mm (coronal plane) and 0.9 ± 1.0 mm (axial plane). Multivariate analysis revealed that a posterior pelvic tilt [odds ratio (OR, 1.1; 95% confidence interval (CI), 1.00–1.23] and anterior surgical approach (OR, 5.1; 95% CI, 1.69–15.38) were predictive factors for inaccurate cup positioning with robot-assisted THA. This is the first study to demonstrate the predictive risk factors (posterior pelvic tilt and anterior surgical approach) for inaccurate cup position in robot-assisted THA.

BACKGROUND: Periprosthetic joint infection is a difficult complication, especially in patients with rheumatoid arthritis. Life-threatening septic shock due to periprosthetic joint infection caused by group G streptococcus is rare, and there have been few reports about its treatment. We describe a successful case of sudden onset septic shock due to group G Streptococcus infection after revision total knee arthroplasty. CASE REPORT: A 61-year-old woman with rheumatoid arthritis treated with biological disease-modifying antirheumatic drugs for about 12 years presented with acute right knee pain and shock 6 months after revision total knee arthroplasty. Periprosthetic joint infection caused by group G Streptococcus was diagnosed. She was admitted to the Intensive Care Unit, treated with respiratory support and dialysis, and underwent irrigation, debridement, and polyethylene liner exchange as the first surgery. At 9 days after the first surgery, she underwent the second surgery, consisting of implant removal and antibiotic spacer placement due to failure. It took approximately 7 weeks to normalize the levels of systemic markers of inflammation with intravenous antibiotics and then oral antibiotics for further 12 weeks, but re-revision total knee arthroplasty was successfully performed 1.5 years later. At a 1-year follow-up from the final surgery, she was able to walk with a cane and had no symptoms of infection. CONCLUSIONS: In such cases with sudden onset of septic shock due to periprosthetic joint infection, appropriate and prompt surgical treatment should be performed to save the infected limb as well as the patient’s life.