Search

Multiple microRNAs encapsulated in extracellular vesicles (EVs) including exosomes, unique subtypes of EVs, differ in healthy and cancer groups of people, and they represent a warning sign for various cancer scenarios. Since all EVs in blood cannot be transferred from donor to recipient cells during a single blood circulation, kidney filtration could pass some untransferred EVs from blood to urine. Previously, we reported on the ability of zinc oxide nanowires to capture EVs based on surface charge and hydrogen bonding; these nanowires extracted massive numbers of microRNAs in urine, seeking cancer-related microRNAs through statistical analysis. Here, we report on the scalability of the nanowire performance capability to comprehensively capture EVs, including exosomes, in urine, extract microRNAs from the captured EVs in situ , and identify multiple microRNAs in the extracted microRNAs differing in noncancer and lung cancer subjects through machine learning-based analysis. The nanowire-based extraction allowed the presence of about 2500 species of urinary microRNAs to be confirmed, meaning that urine includes almost all human microRNA species. The machine learning-based analysis identified multiple microRNAs from the extracted microRNA species. The ensembles could classify cancer and noncancer subjects with the area under the receiver operating characteristic curve of 0.99, even though the former were staged early.

Detecting hydrogen sulfide (H 2 S) odor gas in the environment at parts-per-billion-level concentrations is crucial. However, a significant challenge is the rapid deactivation caused by SO 4 2- deposition. To address this issue, we developed a sensing material comprising Fe 2 O 3 -decorated WO 3 nanowires (FWO) with strong interfacial interaction. During the H 2 S sensing process, important oxygen vacancies (OVs) are generated in situ and are recyclable on the surface of the Fe 2 O 3 cluster. This sensor achieves a response of 140 (Ra/Rg) toward 50 ppm of H 2 S at 250 °C, with an experimentally measured detection limit of 1 ppb. It also exhibits remarkable stability, with no significant change observed over a long period of 150 days. Based on a combination of in situ DRIFT and DFT calculations, we have identified that the overactivation of O 2 is the key step in the formation of SO 4 2- . This overactivation can be partially modulated by the synergistic effect of Fe 2 O 3 decoration and the in situ generated OVs, regulating the oxidation product to SO 2 rather than the toxic SO 4 2- . Furthermore, the continuous generation of OVs compensates for the loss of active sites pertaining to SO 4 2- deposition, thereby contributing to the excellent stability of the sensor. This study underscores the beneficial impact of in situ OV generation in FWO for H 2 S sensing, offering a dynamic strategy to enhance sensor performance, particularly in terms of stability.

The achievement of flexible skin electrodes for dynamic monitoring of biopotential is one of the challenging issues in flexible electronics due to the interference of large acceleration and heavy sweat that influence the stability of skin-electrode interfaces. This work presents materials and techniques to achieve self-healing and shear-stiffening electrodes and an associated flexible system that can be used for multichannel biopotential measurement on the skin. The electrode that is based on a composite of silver (Ag) flakes, Ag nanowires, and polyborosiloxane offers an electrical conductivity of 9.71 × 10 4 S/m and a rheological characteristic that ensures stable and fully conformal contact with skin and easy removal under different shear rates. The electrode can maintain its conductivity even after being stretched by more than 60% and becomes self-healed after mechanical damage. The combination of the electrodes with a screen-printed multichannel flexible sensor allows stable monitoring of both static and dynamic electromyography signals, leading to the acquisition of high-quality multilead biopotential signals that can be readily extracted to yield gesture recognition results with over 97.42% accuracy. The conductive self-healing materials and flexible sensors may be utilized in various daily biopotential sensing applications, allowing highly stable dynamic measurement to facilitate artificial intelligence-enabled health condition diagnosis and human-computer interface.

Electrochemistry-based wearable and wireless sweat analysis is emerging as a promising noninvasive method for real-time health monitoring by tracking chemical and biological markers without the need for invasive blood sampling. It offers the potential to remotely monitor human sweat conditions in relation to metabolic health, stress, and electrolyte balance, which have implications for athletes, patients with chronic conditions, and individuals for the early detection and management of health issues. The state-of-the-art mainstream technology is dominated by the concept of a wearable microfluidic chip, typically based on elastomeric PDMS. While outstanding sensing performance can be realized, the design suffers from the poor permeability of PDMS, which could cause skin redness or irritation. Here, we introduce an omnidirectionally permeable, deformable, and wearable sweat analysis system based on gold nanowire sponges. We demonstrate the concept of all-in-one soft sponge electrochemistry, where the working, reference, and counter electrodes and electrolytes are all integrated within the sponge matrix. The intrinsic porosity of sponge in conjunction with vertically aligned gold nanowire electrodes gives rise to a high electrochemically active surface area of ∼67 cm 2 . Remarkably, this all-in-one sponge-based electrochemical system exhibited stable performance under a pressure of 10 kPa and 300% omnidirectional strain. The gold sponge biosensing electrodes could be sandwiched between two biocompatible sweat pads, which can serve as natural sweat collection and outflow layers. This naturally biocompatible and permeable platform can be integrated with wireless communication circuits, leading to a wireless sweat analysis system for the real-time monitoring of glucose, lactate, and pH during exercise.

This study introduces an array of semiconductor oxide single nanowires fabricated using advanced semiconductor processing techniques, including electron beam lithography and thin-film deposition, which is well-suited for large-scale nanowire integration. A four-channel nanowire array consisting of tin oxide (SnO 2 ), indium oxide (In 2 O 3 ), ferric oxide (Fe 3 O 4 ), and titanium oxide (TiO 2 ) was developed. As a proof of concept, we converted the response curves of the sensor array to heat maps, enabling comprehensive feature representation. The fabricated electronic nose (E-nose) was utilized to detect three types of volatile organic compounds (VOCs), with the results visualized in a heat map format. Additionally, the performance of each individual sensor was quantitatively studied, highlighting the array's potential for enhanced gas detection and analysis. To further illustrate the interaction between gas molecules and the nanowires, we visualized the gas response results by mapping the sensor's signal changes. These visualizations provide a clear representation of how different gas molecules interact with specific nanowires. For example, the heat maps reveal distinct response patterns for each type of VOC, allowing for the identification and differentiation of gases based on their unique signatures. This visualization technique not only enhances the understanding of gas-nanowire interactions but also demonstrates the effectiveness of the E-nose in distinguishing between various VOCs. The SnO 2 nanowire gas sensor showed enhanced gas response compared to other materials. The SnO 2 and TiO 2 gas sensors showed enhanced response (62 and 56 s) and recovery times (100 and 37 s).

A precise recording of electrophysiological signals requires high-performance flexible bioelectrodes to build a robust skin interface. The past decade has witnessed encouraging progress in the development of elastomeric electrodes for wearable electrophysiological monitoring; however, it remains challenging to achieve excellent flexibility, conformal contact, and high durability simultaneously. Herein, we report on an effective method to fabricate flexible yet durable microneedle electrodes (MEs) based on vertically aligned gold nanowires (Au NWs) embedded polyimide (PI), which meet the above three design requirements. The Au NWs embedded PI MEs could build conformal contact with human skin and maintain electrical stability with minimal contact impedance by effectively penetrating the stratum corneum of the skin. In comparison studies, we found our MEs outperformed conventional gel or elastomeric soft electrodes. We further integrated the vertical Au-NW MEs into a wearable healthcare system and achieved wireless real-time recordings of electromyography (EMG) and electrocardiography (ECG) with high signal-to-noise ratios (SNRs) and low motion artifacts. Our fabrication strategy opens a new route to improve the durability and reliability of emerging nanomaterial-based soft bioelectrodes for long-term wearable healthcare applications.

Electrical stimulation has been used clinically as an adjunct therapy to accelerate the healing of bone defects, and its mechanism requires further investigations. The complexity of the physiological microenvironment makes it challenging to study the effect of electrical signal on cells alone. Therefore, an artificial system mimicking cell microenvironment in vitro was developed to address this issue. In this work, a novel electrical stimulation system was constructed based on polypyrrole nanowires (ppyNWs) with a high aspect ratio. Synthesized ppyNWs formed a conductive network in the composited hydrogel which contained modified gelatin with methacrylate, providing a conductive cell culture matrix for bone marrow mesenchymal stem cells. The dual-network conductive hydrogel had improved mechanical, electrical, and hydrophilic properties. It was able to imitate the three-dimensional structure of the cell microenvironment and allowed adjustable electrical stimulations in the following system. This hydrogel was integrated with cell culture plates, platinum electrodes, copper wires, and external power sources to construct the artificial electrical stimulation system. The optimum voltage of the electrical stimulation system was determined to be 2 V, which exhibited remarkable biocompatibility. Moreover, this system had significant promotion in cell spreading, osteogenic makers, and bone-related gene expression of stem cells. RNA-seq analysis revealed that osteogenesis was correlated to Notch, BMP/Smad, and calcium signal pathways. It was proven that this biomimetic system could regulate the osteogenesis procedure, and it provided further information about how the electrical signal regulates osteogenic differentiations.

Hydrogen peroxide (H 2 O 2 ) levels play a vital role in redox regulation and maintaining the physiological balance of living cells, especially in cell mechanotransduction. Despite the achievements on strain-induced cellular H 2 O 2 monitoring, the applied voltage for H 2 O 2 electrooxidation possibly gave rise to an abnormal expression and inadequate accuracy, which was still an inescapable concern. Hence, we decorated an interlaced CuO@TiO 2 nanowires (NWs) semiconductor meshwork onto a polydimethylsiloxane film-supported gold nanotubes substrate (Au NTs/PDMS) to construct a flexible photoelectrochemical (PEC) sensing platform. Under white light irradiation, CuO@TiO 2 NWs synergistically exhibited great stretchability and the PEC platform enabled stable photocurrent responses from the reduction of H 2 O 2 even during mechanical deformation. Moreover, the admirable biocompatibility and an almost negligible open circuit voltage of +0.18 V for the CuO@TiO 2 NWs/Au NTs/PDMS sensor guaranteed human umbilical vein endothelial cells (HUVECs) adhesion tightly thereon even under continuous illumination for 30 min. Finally, the as-proposed stretchable PEC sensor achieved sensitive and true-to-life monitoring of transient H 2 O 2 release during HUVECs deformation, in which H 2 O 2 release was positively correlated to mechanical strains. This investigation opens a new shade path on in situ cellular sensing and meanwhile greatly expands the application mode of the PEC approach.

Bioelectrical signal measurements play a crucial role in clinical diagnosis and continuous health monitoring. Conventional wet electrodes, however, present limitations as they are conductive gel for skin irritation and/or have inflexibility. Here, we developed a cost-effective and user-friendly stretchable dry electrode constructed with a flexible network of Ag/AgCl nanowires embedded in polydimethylsiloxane (PDMS). We compared the performance of the stretched Ag/AgCl nanowire electrode with commonly used commercial wet electrodes to measure electrocardiogram (ECG), electromyogram (EMG), and electroencephalogram (EEG) signals. All the signal-to-noise ratios (SNRs) of the as-fabricated or stretched (50% tensile strain) Ag/AgCl nanowire electrodes are higher than that measured by commercial wet electrodes as well as other dry electrodes. The evaluation of ECG signal quality through waveform segmentation, the signal quality index (SQI), and heart rate variability (HRV) reveal that both the as-fabricated and stretched Ag/AgCl nanowire electrode produce high-quality signals similar to those obtained from commercial wet electrodes. The stretchable electrode exhibits high sensitivity and dependability in measuring EMG and EEG data, successfully capturing EMG signals associated with muscle activity and clearly recording α -waves in EEG signals during eye closure. Our stretchable dry electrode shows enhanced comfort, high sensitivity, and convenience for curved surface biosignal monitoring in clinical contexts.

Molecularly imprinted polymers (MIP) have been widely owing to their specificity, however, their singular structure imposes limitations on their performance. Current enhancement methods, such as doping with inorganic nanomaterials or introducing various functional monomers, are limited and single, indicating that MIP performances require further advancement. In this work, a dual-modification approach that integrates both conductive inorganic nanomaterials and diverse bifunctional monomers was proposed to develop a multifunctional MIP-based electrochemical (MMIP-EC) sensor for diuron (DU) detection. The MMIP was synthesized through a one-step electrochemical copolymerization of silver nanowires (AgNWs), o-phenylenediamine (O-PD), and 3,4-ethylenedioxythiophene (EDOT). DU molecules could conduct fluent electron transfer within the MMIP layer through the interaction between anchored AgNWs and bifunctional monomers, and the abundant recognition sites and complementary cavity shapes ensured that the imprinted cavities exhibit high specificity. The current intensity amplified by the two modification strategies of MMIP (3.7 times) was significantly higher than the sum of their individual values (3.2 times), exerting a synergistic effect. Furthermore, the adsorption performance of the MMIP was characterized by examining the kinetics and isotherms of the adsorption process. Under optimal conditions, the MMIP-EC sensor exhibits a wide linear range (0.2 ng/mL to 10 μg/mL) for DU detection, with a low detection limit of 89 pg/mL and excellent selectivity (an imprinted factor of 10.4). In summary, the present study affords innovative perspectives for the fabrication of MIP-EC sensor with superior analytical performance., Competing Interests: Declaration of competing interest We declare that we have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Flexible sensors have been applied in human health monitoring and biomedical research, but producing high-performance piezoresistive sensors at low cost is still challenging. To address these shortcomings, we proposed a microstructured carbon nanotube (CNT)/cellulose aerogel-based pressure sensor. The sensor consists of three parts, i.e., cellulose/poly(vinyl alcohol)/CNT aerogel-based sensing layer and top and bottom thermoplastic polyurethane elastomer (TPU)/silver nanowire (Ag NW) nanofiber electrode. The aerogel is fabricated using a simple freeze-drying method and an easy electrospinning method to obtain the nanofiber-based electrode. Two TPU/Ag NW nanofiber electrodes sandwiched the aerogel with a microstructure in the middle. Benefiting from the microcone and micropore structures on the nanofiber electrode, the assembled sensors show a high sensitivity of 66.4 kPa -1 , a significant detection boundary of 50 kPa, and an excellent response speed of 10 ms. The high sensing performance enables the sensor to monitor physiological signals, Morse code interactions, and gesture recognition. With the help of machine learning, the success rate of gesture recognition is as high as 98.8%. The preparation of this pressure sensor based on an aerogel shows excellent health and environmental monitoring potential as an artificial skin.

The G-quadruplex (GQ) formed by guanine-rich DNA strands exhibits superior thermal stability and electric properties, which have generated substantial interest in applying GQ DNA to bioelectric interfaces. However, single G-wires formed by GQs have not yet surpassed the μm length due to the lack of an optimal assembly protocol and understanding of assembly mechanisms that limit application. Herein, we optimized a self-assembly protocol for a short 4-nt oligonucleotide (dG4) to achieve micrometer lengths of G-wires, including the buffer composition, incubation process and surface assembly. Furthermore, both theoretical modeling and chemical modifications were applied to unveil the atomic-level detail of GQ monomer interfaces and indicated that the assembly process follows a stepwise mechanism from nucleation to grow into oligomers and nanowires.

Soft and stretchable nanocomposites can match the mechanical properties of neural tissue, thereby minimizing foreign body reactions to provide optimal stimulation and recording specificity. Soft materials for neural interfaces should simultaneously fulfill a wide range of requirements, including low Young's modulus (<<1 MPa), stretchability (≥30%), high conductivity (>> 1000 S cm -1 ), biocompatibility, and chronic stability (>> 1 year). Current nanocomposites do not fulfill the above requirements, in particular not the combination of softness and high conductivity. Here, this challenge is addressed by developing a scalable and robust synthesis route based on polymeric reducing agents for smooth, high-aspect ratio gold nanowires (AuNWs) of controllable dimensions with excellent biocompatibility. AuNW-silicone composites show outstanding performance with nerve-like softness (250 kPa), high conductivity (16 000 S cm -1 ), and reversible stretchability. Soft multielectrode cuffs based on the composite achieve selective functional stimulation, recordings of sensory stimuli in rat sciatic nerves, and show an accelerated lifetime stability of >3 years. The scalable synthesis method provides a chemically stable alternative to the widely used AgNWs, thereby enabling new applications within electronics, biomedical devices, and electrochemistry., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

Lightweight, flexible, efficient and easy-to-manufacture electromagnetic interference (EMI) shielding materials are in urgent demand in the communications industry, artificial intelligence and wearable electronics. Based on the large size difference between one-dimensional carboxymethyl cellulose nanofibers (CMC) and large-diameter silver nanowires (AgNWs), layered AgNWs/CMC nanocomposite films with large effective thickness, and high conductivity were first prepared by a simple one-step vacuum filtration self-assembly technique. The unique layered structure of the AgNWs/CMC nanocomposite film significantly enhances the conductive pathways within the film, endowing it excellent EMI shielding performance. The results show that the conductivity of the ultra-thin film with a thickness of 20 μm is 3.72 × 10 6  S/m, and the EMI SE in the X-band is 87.7 dB, which can effectively shield electromagnetic signals in mobile communications. Furthermore, the AgNWs/CMCs nanocomposite films exhibit excellent thermal management performance, which can be heated to 100-180 °C within 10 s at a low voltage of 1.5 V. In particular, this nanocomposite film with a new layered structure provides a noval preparation idea for future EMI shielding materials and wearable heating devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Enamel has good optical and mechanical properties because of its multiscale hierarchical structure. Biomimetic construction of enamel-like 3D bulk materials at nano-, micro-, mesh- and macro-levels is a challenge. A novel facile, cost-effective, and easy large-scale bottom-up assembly strategy to align 1D hydroxyapatite (HA) nanowires bundles to 3D hierarchical enamel structure with the nanowires bundles layer-by-layer interweaving orientation, is reported. In the strategy, the surface of oleate templated ultralong HA nanowires with a large aspect ratio is functionalized with amphiphilic 10-methacryloyloxydecyl dihydrogen phosphate (MDP). Furtherly, the MDP functionalized HA nanowire bundles are assembled layer-by-layer with oriented fibers in a single layer and cross-locked between layers at a certain angle at mesoscale and macroscale in the viscous bisphenol A-glycidyl methacrylate (Bis-GMA) ethanol solution by shear force induced by simple agitation and high-speed centrifugation. Finally, the excessive Bis-GMA and ethanol are removed, and (Bis-GMA)-(MDP-HA nanowire bundle) matrix is densely packed under hot pressing and polymerized to form bulk enamel-like materials. The composite has superior optical properties and comparable comprehensive mechanic performances through a combination of strength, hardness, toughness, and friction. This method may open new avenues for controlling the nanowires assembly to develop hierarchical nanomaterials with superior properties for many different applications., (© 2024 Wiley‐VCH GmbH.)

Exosomes are of great significance in clinical diagnosis, due to their high homology with parental generation, which can reflect the pathophysiological status. However, the quantitative and classification detection of exosomes is still faced with the challenges of low sensitivity and complex operation. In this study, we develop an electrical and label-free method to directly detect exosomes with high sensitivity based on a Silicon nanowire field effect transistor biosensor (Si-NW Bio-FET). First, the impact of Debye length on Si-NW Bio-FET detection was investigated through simulation. The simulation results demonstrated that as the Debye length increased, the electrical response to Si-NW produced by charged particle at a certain distance from the surface of Si-NW was greater. A Si-NW Bio-FET modified with specific antibody CD81 on the nanowire was fabricated then used for detection of cell line-derived exosomes, which achieved a low limit of detection (LOD) of 1078 particles/mL in 0.01 × PBS. Furthermore, the Si-NW Bio-FETs modified with specific antibody CD9, CD81 and CD63 respectively, were employed to distinguish exosomes derived from human promyelocytic leukemia (HL-60) cell line in three different states (control group, lipopolysaccharide (LPS) inflammation group, and LPS + Romidepsin (FK228) drug treatment group), which was consistent with nano-flow cytometry. This study provides a highly sensitive method of directly quantifying exosomes without labeling, indicating its potential as a tool for disease surveillance and medication instruction., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Surface-assisted laser desorption/ionization (SALDI) mass spectrometry imaging (MSI) holds great value in spatial metabolomics and tumor diagnosis. Tissue imprinting on the SALDI target can avoid laser-induced tissue ablation and simplifies the sample preparation. However, the tissue imprinting process always causes lateral diffusion of biomolecules, thereby losing the fidelity of metabolite distribution on tissue. Herein, a membrane-mediated imprinting mass spectrometry imaging (MMI-MSI) strategy is proposed using isoporous nuclepore track-etched membrane as a mediating imprinting layer to selectively transport metabolites through uniform and vertical pores onto silicon nanowires (SiNWs) array. Compared with conventional direct imprinting technique, MMI-MSI can not only exclude the adsorption of large biomolecules but also avoid the lateral diffusion of metabolites. The whole time for MMI-based sample preparation can be reduced to 2 min, and the lipid peak number can increase from 46 to 113 in kidney tissue detection. Meanwhile, higher resolution of MSI can be achieved due to the confinement effect of the pore channel in the diffusion of metabolites. Based on MMI-MSI, the tumor margins of liver cancer can be clearly discriminated and their different subtypes can be precisely classified. This work demonstrates MMI-MSI is a rapid, highly sensitive, robust and high-resolution technique for spatially-resolved metabolomics and pathological diagnosis., (© 2024 Wiley‐VCH GmbH.)

Dopamine is an important neurotransmitter in the body and closely related to many neurodegenerative diseases. Therefore, the detection of dopamine is of great significance for the diagnosis and treatment of diseases, screening of drugs and unraveling of relevant pathogenic mechanisms. However, the low concentration of dopamine in the body and the complexity of the matrix make the accurate detection of dopamine challenging. Herein, an electrochemical sensor is constructed based on ternary nanocomposites consisting of one-dimensional Pt nanowires, two-dimensional MXene nanosheets, and three-dimensional porous carbon. The Pt nanowires exhibit excellent catalytic activity due to the abundant grain boundaries and highly undercoordinated atoms; MXene nanosheets not only facilitate the growth of Pt nanowires, but also enhance the electrical conductivity and hydrophilicity; and the porous carbon helps induce significant adsorption of dopamine on the electrode surface. In electrochemical tests, the ternary nanocomposite-based sensor achieves an ultra-sensitive detection of dopamine (S/N = 3) with a low limit of detection (LOD) of 28 nM, satisfactory selectivity and excellent stability. Furthermore, the sensor can be used for the detection of dopamine in serum and in situ monitoring of dopamine release from PC12 cells. Such a highly sensitive nanocomposite sensor can be exploited for in situ monitoring of important neurotransmitters at the cellular level, which is of great significance for related drug screening and mechanistic studies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A target-induced multiregion MNAzyme nanowire system is designed for the ultrasensitive and homogeneous detection of microRNAs (miRNAs). miRNA-21 and miRNA-375 are chosen as analytes, and a miRNA-induced primer exchange reaction (PER) is utilized to construct a long DNA strand with repetitive sequences. This innovative design enables the efficient anchoring of numerous MNAzymes. This unique architecture significantly boosts the effective local concentration of MNAzymes, thereby enhancing the sensitivity and efficiency of miRNA detection. Notably, the limit of detection (LOD) achieved with our target-induced multiregion MNAzyme nanowire approach is over an order of magnitude lower than most other MNAzyme-based methods, while the MNAzyme reaction time is reduced from several hours to 50 min. The method has demonstrated successful applications in quantitatively determining the expression levels of two miRNAs in cell lysates of MCF-7, HeLa and MCF-10 A cells, highlighting its potential for assaying miRNA biomarkers in clinical samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Against the backdrop of advancements in modern multifunctional wearable electronics, there is a growing demand for simple, sustainable, and portable electronic skin (e-skin), posing significant challenges. This study aims to delineate the development of a straightforward, transparent, highly sensitive, and high power-density electronic skin based on a triboelectric nanogenerator(S-TENG), designed for harvesting human body energy and real-time monitoring of the physiological motion status. Our e-skin incorporates thermally treated polyvinylidene fluoride (PVDF) fiber membranes as the contact layer and a film of silver nanowires as the conductive electrodes. The resulting contact-separation type e-skin exhibits an impressive transparency of 80 %, along with a nice sensitivity value, capable of detecting a light touch from a 0.13 g sponge and demonstrating good working stability and breathability. Leveraging the triboelectric effect, our e-skin generates an open-circuit voltage of 301 V and a short-circuit current of 2.7 μA under an extrinsic force of 8 N over an interaction area of 4 × 4 cm 2 , achieving a power density up to 306 mW/m 2 . With its signal processing circuitry, the integrated S-TENG showcases nice energy harvesting and signal transmission capabilities. Accordingly, we contend that S-TENG has potential applications in energy capture and real-time human motion state monitoring. This research is anticipated to blaze a novel and practical trail for self-powered wearable devices and personalized health rehabilitation training regimens., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Engineering multimetallic nanocatalysts with the entropy-mediated strategy to reduce reaction activation energy is regarded as an innovative and effective approach to facilitate efficient heterogeneous catalysis. Accordingly, conformational entropy-driven high-entropy alloys (HEAs) are emerging as a promising candidate to settle the catalytic efficiency limitations of nanozymes, attributed to their versatile active site compositions and synergistic effects. As proof of the high-entropy nanozymes (HEzymes) concept, elaborate PdMoPtCoNi HEA nanowires (NWs) with abundant active sites and tuned electronic structures, exhibiting peroxidase-mimicking activity comparable to that of natural horseradish peroxidase are reported. Density functional theory calculations demonstrate that the enhanced electron abundance of HEA NWs near the Fermi level (E F ) is facilitated via the self-complementation effect among the diverse transition metal sites, thereby boosting the electron transfer efficiency at the catalytic interface through the cocktail effect. Subsequently, the HEzymes are integrated with a portable electronic device that utilizes Internet of Things-driven signal conversion and wireless transmission functions for point-of-care diagnosis to validate their applicability in digital biosensing of urinary biomarkers. The proposed HEzymes underscore significant potential in enhancing nanozymes catalysis through tunable electronic structures and synergistic effects, paving the way for reformative advancements in nano-bio analysis., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Chitin has garnered significant attention due to its renewable, biocompatibility and biodegradability, while its practical application seriously hindered as the functionality of chitin itself can no longer meet people's increasing requirements for materials. Here, an effective method is successfully built for high-performance chitin fibers fabrication through a multi-step strategy that involved chemical pre-crosslinking, followed by wet-twisting and wet-stretching techniques, combined with physical cross-linking. The as-prepared chitin fiber exhibited a smooth surface, adjustable diameter, and mechanical strong properties (144.6 MPa). More importantly, functional chitin fiber with magnetic or conductive abilities can be easily obtained by spraying Fe 3 O 4 particles or Ag nanowire on the chemical pre-crosslinking chitin gel film before stretching and twisting. The doped functional inorganic particles exist in a continuous ribbon structure in the fiber reduced the decrease in material strength caused by uneven particles dispersion, resulting 88.4 % of stress and 91.6 % of strain retention. This work not only bestow invaluable insights into the fabrication of functional chitin fibers but also provide a novel approach to solve the problem of poor compatibility between organic and inorganic composite materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, the gas sensing properties of a single ZnO nanowire (NW) are investigated, simultaneously in terms of photoluminescence (PL) and photocurrent (PC) response to NO 2 gas, with the purpose of giving new insights on the gas sensing mechanism of a single 1D ZnO nanostructure. A single ZnO NW sensing device was fabricated, characterized, and compared with a sample made of bundles of ZnO NWs. UV near-band-edge PL emission spectroscopy was carried out at room temperature and by lowering the temperature down to 77 K, which allows detection of resolved PL peaks related to different excitonic transition regions. Surface effects were observed in PL maps, considering different nano and microstructures. Electrical and optical measurements were acquired at the same time during the NO 2 gas exposure, allowing for the comparison of PL and PC response times and signal recovery. During NO 2 gas desorption, irreversible behavior in the surface-related and donor-acceptor pair (DAP) regions is interpreted as the effect of an initial transient when electronic transfer from the gas molecules to the bulk occurs through the ZnO NW surface which acts as a channel. To the best of our knowledge, this is the first work which investigates the simultaneous PL optical and PC electrical response signals of a single ZnO NW to gas exposure.

The continuous and stable monitoring by sensors is crucial for ensuring the safe utilization of hydrogen due to its inherent high explosiveness. Currently, catalyst aging and oxygen dependence often limit the lifetime of most sensors, which stems from the sensing materials and catalytic reaction in comparison to thermal conductivity sensors. Thermal conductivity sensors possess superior sensing characteristics such as lowpower consumption and exceptional stability attributed to their free-catalysts or free-oxygen nature. Herein, we present an ultralow-power hydrogen-thermal conductivity sensor based on suspended bare platinum nanowires. This sensor incorporates two suspended independent working elements (serpentine/bridge), each of which is thermally decoupled from the substrate. Also, the bridge element operates at significantly lower power levels (the lowest ∼3.32 μW) compared to existing direct-current hydrogen-thermal conductivity sensors. Furthermore, it demonstrates a 99.99% linearity between hydrogen concentration and response under various operating powers. Finally, our sensor shows remarkable stability through a repeatability test (>30,000 cycles). This developed platform provides an optimal structure scheme for integrated sensors with ultralow-power, extremely stable, highly linear-response sensing characteristics, which is expected to be widely used for hydrogen detection and leakage warning under various pipeline distribution systems.

Cuproptosis, dependent on Cu overload, presents novel opportunities for cancer therapy. Cu-based nanomaterials have shown excellent advantages for the intracellular delivery of Cu. However, the biological process of Cu nanomaterials transporting Cu ions into cancer cells remains unclear. In this study, we tracked the Cu ion release process of copper nanowires (CuNWs) and copper nanoparticles (CuNPs) at the single-cell level. CuNWs with 5-μm length and CuNPs were found to be completely internalized by cancer cells. Interestingly, CuNWs escaped from the endolysosomal system, whereas CuNPs were mainly trapped in the lysosomes. This specific intracellular distribution of CuNWs led to cytoplasmic Cu ion overload, directly damaging mitochondria and inducing dihydrolipoamide S-acetyltransferase (DLAT) protein aggregation. Through these excessive Cu ions, CuNWs triggered more efficient cuproptosis than CuNPs to further increase cell death. Thus, CuNWs are more effective in delivering Cu ions than CuNPs, providing a novel perspective for designing cuproptosis-based functional nanomaterials for cancer therapy.

A cortisol biosensor was developed based on double-conducting polymer nanowires, which exhibits excellent conductivity, resistance to biological contamination, and outstanding sensing performance. The biosensor employs dual-mode electrochemical techniques, namely, differential pulse voltammetry (DPV) and chronoamperometry (CA), for the sensitive and low fouling detection of the glucocorticoid hormone cortisol. Experimental results demonstrated that the linear detection range of the biosensor in DPV mode was 1.0 × 10 -14 -1.0 × 10 -8  M, with a detection limit of 0.131 × 10 -14  M. In CA mode, the biosensor exhibited a detection range of 1.0 × 10 -13 -1.0 × 10 -7  M and a detection limit of 0.313 × 10 -13  M. The biosensor was successfully utilized for the rapid detection of cortisol in human saliva. The combination of a high-specificity cortisol aptamer and functionalized double-conducting polymer nanowires ensured the exceptional specificity and sensitivity of the biosensor in detecting real biological samples., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

We introduce the FlexoSERS sensor, which is notable for its high stretchability, sensitivity, and patternability. Featuring a hierarchically oriented jellyfish-like architecture constructed from stretchable gold nanowires, this sensor provides an ultrasensitive SERS signal even under 50% strain, with an enhancement factor (EF) of 3.3 × 10 10 . Impressively, this heightened performance remains consistently robust across 2,500 stretch-release cycles. The integration of nanowires with 3D-printed hydrogel enables a customizable FlexoSERS sensor, facilitating localized sweat collection and detection. The FlexoSERS sensor successfully detects and quantifies uric acid (UA) in both artificial and human sweat and functions as a pH sensor with repeatability and sensitivity across a pH range of 4.2-7.8, enabling real-time sweat monitoring during exercise. In summary, the rational architectural design, scalable fabrication process, and hydrogel integration collectively position this nanowire-based FlexoSERS sensor as a highly promising platform for customizable wearable sweat diagnostics.

Long nanowires offer an increased surface area for biomolecule immobilization, facilitating enhanced binding capacity and sensitivity in the detection of target analytes. However, robust long-nanowire fabrication remains a significant challenge. In this paper, we developed a novel construction of a micro chemical pen (MCP), called a clean-assisted micro chemical pen (CAMCP), for robust long-nanowire fabrication. CAMCP, based on localized hydrodynamic flow confinement, was conducted by incorporating a clean phase to effectively dissolve aggregated silver particles in the aspiration channel's shell, thereby enhancing the MCP's longevity by 60.84%, allowing for an 840 μm extension in nanowire patterning capability. A 4600-aspect ratio (length:1200 μm, width: 260 nm) nanowire was fabricated by CAMCP and utilized as a nanowire sensor, showing a 39.7% increase in IgA detection sensitivity compared to a 3000-aspect ratio sensor. Furthermore, the longer nanowire sensor exhibited enhanced signal responses, a higher signal-to-noise ratio, and a lower limit of detection (LOD). The preponderant bioassay performances of the longer nanowire sensor in bioassays, facilitated by CAMCP, open up its possibilities for chemical-synthesis nanowires (NWs) in ultrasensitive biodetection.

Background: In recent years, environmental pollution has attracted widespread global attention. Among them, environmental problems caused by heavy metal pollution pose a serious threat to human health and ecosystems. Mercury is a common heavy metal pollutant with high toxicity and wide distribution. Excessive intake of Hg 2+ can cause permanent and severe damage to the nervous system, respiratory system, and kidneys in the human body. Therefore, developing both accurate and fast detection methods for Hg 2+ is of great significance., Results: A sensitive Hg 2+ colorimetric sensor is designed based on PtNi nanowires (NWs) and Pt NWs with peroxidase-mimetic activity. PtNi NWs and Pt NWs catalyze the reaction of 3,3', 5,5'-tetramethylbenzidine (TMB) with hydrogen peroxide (H 2 O 2 ) to produce blue oxidized TMB (oxTMB). The specific interaction of Pt-Hg significantly inhibits the peroxidase-mimetic activity of PtNi NW and Pt NW nanozymes, resulting in a lighter blue color. It is worth noting that compared with specific activity (SA) of Pt NWs (3.31 U/mg), PtNi NWs own superior SA (10.43 U/mg), which inevitably leads to a wider linear range of Hg 2+ analysis (1 nM-200 μM) and a lower detection limit (0.6748 nM) for PtNi NWs-based colorimetric sensor, versus linear range (4 nM-5 μM) and LOD of 1.198 nM for Pt NWs-based colorimetric sensor, which are far below the Hg 2+ threshold (10 nM) for drinking water set by the US Environmental Protection Agency., Significance: The two nanozyme colorimetric sensors have been successfully used for the evaluation of Hg 2+ in complex river water and tap water. Due to the advantages of simple operation, fast response, and high sensitivity, colorimetric sensors have broad application prospects in environmental monitoring., Competing Interests: Declaration of competing interest We declare that we have no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The development of wearable electronic devices for human health monitoring requires materials with high mechanical performance and sensitivity. In this study, we present a novel transparent tissue-like ionogel-based wearable sensor based on silver nanowire-reinforced ionogel nanocomposites, P(AAm- co -AA) ionogel-Ag NWs composite. The composite exhibits a high stretchability of 605% strain and a moderate fracture stress of about 377 kPa. The sensor also demonstrates a sensitive response to temperature changes and electrostatic adsorption. By encapsulating the nanocomposite in a polyurethane transparent film dressing, we address issues such as skin irritation and enable multidirectional stretching. Measuring resistive changes of the ionogel nanocomposite in response to corresponding strain changes enables its utility as a highly stretchable wearable sensor with excellent performance in sensitivity, stability, and repeatability. The fabricated pressure sensor array exhibits great proficiency in stress distribution, capacitance sensing, and discernment of fluctuations in both external electric fields and stress. Our findings suggest that this material holds promise for applications in wearable and flexible strain sensors, temperature sensors, pressure sensors, and actuators.

The review considers modern achievements and prospects of using nanowire biosensors, principles of their operation, methods of fabrication, and the influence of the Debye effect, which plays a key role in improving the biosensor characteristics. Special attention is paid to the practical application of such biosensors for the detection of a variety of biomolecules, demonstrating their capabilities and potential in the detection of a wide range of biomarkers of various diseases. Nanowire biosensors also show excellent results in such areas as early disease diagnostics, patient health monitoring, and personalized medicine due to their high sensitivity and specificity. Taking into consideration their high efficiency and diverse applications, nanowire-based biosensors demonstrate significant promise for commercialization and widespread application in medicine and related fields, making them an important area for future research and development.

We have developed a convenient surface-enhanced Raman scattering (SERS) platform based on vertical standing gold nanowires (v-AuNWs) which enabled the on-mask detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) related substances such as the Spike-1 protein and the corresponding pseudo-virus. The Spike-1 protein was clearly distinguished from BSA protein with an accuracy above 99 %, and the detection limit could be achieved down to 0.01 μg/mL. Notably, a similar accuracy was achieved for the pseudo-SARS-CoV-2 (pSARS-2) virus as compared to the pseudo-influenza H7N9 (pH7N9) virus. The sensing strategy and setups could be easily adapted to the real SARS-CoV-2 virus and other highly contagious viruses. It provided a promising way to screen the virus carriers by a fast evaluation of their wearing v-AuNWs integrated face-mask which was mandatory during the pandemic., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This paper describes an alternative method for the in situ synthesis of gold nanoparticles (AuNPs) with a particle size of less than 3 nm, using nanoreactors formed by reverse micelles of 1,4-bis-(2-ethylhexyl) sulfosuccinate sodium (AOT) and nanoparticle stabilization with l-cysteine, which favor the preparation of nanoparticles with size and shape control, which are homogeneously dispersed (1% by weight) on the support of titanium dioxide nanowires (TNWs). To study the activity and selectivity of the prepared catalyst (AuNPs@TNWs), an aqueous solution of 40 mM glycerol was irradiated with a green laser (λ = 530 nm, power = 100 mW) in the presence of the catalyst and O 2 as an oxidant at 22 °C for 6 h, obtaining a glycerol conversion of 86% with a selectivity towards hydroxypyruvic acid (HA) of more than 90%. From the control and reactions, we concluded that the Ti-OH groups promote the glycerol adsorption on the nanowires surface and the surface plasmon of the gold nanoparticles favors the selectivity of the reaction towards the hydroxypyruvic acid., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Diana Blach reports financial support was provided by Colombia Ministry of Science Technology and Innovation. Henry Martinez reports financial support was provided by National Agency for Research and Development. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

As biomarkers of cancer, the accurate and sensitive detection of microRNAs is of great significance. Therefore, we proposed a surface-enhanced Raman scattering (SERS)/electrochemical (EC) dual-mode nanosensor for sensitively detecting miRNA-141. The nanosensor uses Au@Ag nanowires as a novel SERS/EC sensing platform, which has the advantages of good biocompatibility, fast response, and high sensitivity. The dual-mode nanosensor can not only effectively overcome the problem of insufficient reliability of single signal, but also realize the amplification and stable output of the detection signal, to ensure the reliability and repeatability of miRNA detection. With this sensing strategy, the target miRNA-141 can be detected over a wide linear range (100 fM to 50 nM) (LOD of 18.4 fM for SERS and 16.0 fM for electrochemical methods). In addition, the process shows good selectivity and can distinguish miRNA-141 from other interfering miRNAs. The actual analysis of human serum samples also proves that our strategy has good reliability, repeatability, and has broad application prospects in the field of analysis and detection., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Photodynamic therapy (PDT) is receiving extensive attention as an antimicrobial strategy that does not cause drug resistance by reactive oxygen species (ROS). Herein, hierarchical Ag-ZnIn 2 S 4 (Ag-ZIS) core-shell nanowires are synthesized by in situ Metal-Organic Framework derived method for efficient PDT of Candida albicans (C. albicans). The core-shell structure enables spatial synergy strategy to regulate the charge transfer pathway under visible light excitation, in which the Ag nanowires are like the highway for the photogenerated electrons. The enhanced charge carrier separation efficiency greatly increased the chances for the generation of ROS. As expected, the optimized Ag-ZIS nanowires exhibit excellent performance for inactivation of C. albicans under visible light irradiation (λ ≥ 420 nm, 15 min), and the effective sterilization concentration is as high as 10 7 CFU mL -1 . Moreover, in vivo infection experiments suggested that the PDT effect of Ag-ZIS nanowires on the mouse wound healing is better than that of the clinical Ketoconazole drug. The PDT antifungal mechanism of Ag-ZIS nanowires is also investigated, and superoxide anion is found to be the predominant active species to causes C. albicans damage. This work provides a new perspective for designing novel interface structures to regulate charge transfer to achieve efficient PDT antifungal therapy., (© 2024 Wiley‐VCH GmbH.)

The present paper reported on the analysis of structural defects and their influence on the red-emitting γ-Al 2 O 3 :Mn 4+ ,Mg 2+ nanowires using positron annihilation spectroscopy (PAS). The nanowires were synthesized by hydrothermal method and low-temperature post-treatment using glucose as a reducing agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL), and photoluminescence excitation (PLE) were utilized, respectively, for determining the structural phase, morphology and red-emitting intensity in studied samples. Three PAS experiments, namely, positron annihilation lifetime (PAL), Doppler broadening (DB), and electron momentum distribution (EMD), were simultaneously performed to investigate the formations of structural defects in synthesized materials. Obtained results indicated that the doping concentration of 0.06% was optimal for the substitution of Mn 4+ and Mg 2+ to two Al 3+ sites and the formation of oxygen vacancy (V O )-rich vacancy clusters (2V Al  + 3V O ) and large voids (~0.7 nm) with less Al atoms. Those characteristics reduced the energy transfer between Mn 4+ ions, thus consequently enhanced the PL and PLE intensities. Moreover, this optimal doping concentration also effectively controlled the size of nanopores (~2.18 nm); hence, it is expected to maintain the high thermal conductivity of γ-Al 2 O 3 nanowire-phosphor. The present study, therefore, demonstrated a potential application of γ-Al 2 O 3 nanowire-phosphor in fabricating the high-performance optoelectronic devices., (© 2024 John Wiley & Sons Ltd.)

Mechanotransduction is the essential process that cells convert mechanical force into biochemical responses, and electrochemical sensor stands out from existing techniques by providing quantitative and real-time information about the biochemical signals during cellular mechanotransduction. However, the intracellular biochemical response evoked by mechanical force has been poorly monitored. In this paper, we report a method to apply local stretch on single cell and simultaneously monitor the ensuing intracellular biochemical signals. Specifically, a ferromagnetic micropipette was fabricated to locally stretch a single cell labeled with Fe 3 O 4 nanoparticles under the external magnetic field, and the SiC@Pt nanowire electrode (SiC@Pt NWE) was inserted into the cell to monitor the intracellular hydrogen peroxide (H 2 O 2 ) production induced by the local stretch. As a proof of concept, this work quantitatively investigated the elevated amount of H 2 O 2 levels in single endothelial cell under different stretching amplitudes. This work puts forward a new research modality to manipulate and monitor the mechanotransduction at the single-cell level., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

The remarkable biocapacity, injectability, and adaptability of colloidal gels lead to their widespread use in tissue engineering as irregular defect implants. However, multifunctionalities including electroconductivity and antibacterial property are highly required for colloidal gels. In addition, the inherently weak mechanical property of physically crosslinked colloidal gels limits their application. Herein, Ag nanowires (Ag NWs)-reinforced colloidal gels composed of biocompatible gelatin nanoparticles and polydopamine-modified Ag NWs through the controlled electrostatic assembly, which are injectable and conductive, are presented. 1D Ag NWs can significantly improve the mechanical and electrical properties of the colloidal gel while maintaining its inherent excellent injectability. Owing to the network of Ag NWs, the storage modulus and conductivity of the optimized Ag NW colloidal gel are 7.5 and 13 times higher, respectively, than those of the colloidal gel made up of polydopamine-modified Ag nanoparticles with equivalent Ag concentration. Further, this Ag NW colloidal gel can adapt to sharp wounds on skin, which accelerates the healing of an MRSA-infected wound via electrical stimulation., (© 2024 Wiley‐VCH GmbH.)

Cuproptosis, as a newly identified form of programmed cell death, shows great promise in cancer treatment. Efficient Cu + delivery while avoiding systemic toxicity and elimination of the resistance from over-expressed intracellular copper chelator glutathione (GSH) are critical for cuproptosis. Herein, this work innovatively constructs a biocompatible and defect-rich copper hydroxide nanowire (HCu nanowire) through a human serum albumin (HSA) mediated biomineralization method. This work finds that the morphology and size of HCu nanowires can be controlled adjusted by the feed ratio of HSA and Cu 2+ . Remarkably, except for outstanding biocompatibility, HSA coordination endows HCu nanowires abundant oxygen vacancies (OVs), and the defect-rich HCu nanowire possesses excellent GSH consumption efficiency. Density functional theory studies indicate that OVs change GSH absorption energy on defective HCu nanowires. In cancer cells, HCu nanowires deplete GSH and simultaneously produce sufficient free Cu + for enhanced cuproptosis. Meanwhile, Cu + can catalyze endogenous H 2 O 2 into hydroxyl radicals (·OH) via a Fenton-like reaction. Thus, synergetic cuproptosis and ROS mediated apoptosis against tumor are achieved. The experimental results show that HCu nanowires have a better performance in both antitumor efficiency and safety compared with chemotherapeutic drug Dox at the same dose, demonstrating its great potential in clinical applications., (© 2024 Wiley‐VCH GmbH.)

The transport of ions through biological ion channels is regulated not only by their structural characteristics but also by the composition of the phospholipid membrane, which serves as a carrier for nanochannels. Inspired by the modulation of ion currents by lipid membrane composition, exemplified by the activation of the K + channel of Streptomyces A by anionic lipids, we present a biomimetic nanochannel system based on combining DNA nanotechnology with two-dimensional graphene oxide (GO) nanosheets. By designing multibranched DNA nanowires, we assemble programmable DNA scaffold networks (DSNs) on the GO surface to precisely control membrane composition. Modulating the DSN layers from one to five enhances DNA composition, yielding a maximum 12-fold enhancement in ion current, primarily due to charge effects. Incorporating DNAzymes facilitates reversible modulation of membrane composition, enabling cyclic conversion of ion current. This approach offers a pathway for creating devices with highly efficient, tunable ion transport, applicable in diverse fields like mass transport, environmental protection, biomimetic channels, and biosensors.

Intracellular detection and imaging of microRNAs (miRNAs) with low expression usually face the problem of unsatisfactory sensitivity. Herein, a novel dual-function DNA nanowire (DDN) with self-feedback amplification and efficient signal transduction was developed for the sensitive detection and intracellular imaging of microRNA-155 (miRNA-155). Target miRNA-155 triggered catalytic hairpin assembly (CHA) to generate plenty of double-stranded DNA (dsDNA), and a trigger primer exposed in dsDNA initiated a hybridization chain reaction (HCR) between four well-designed hairpins to produce DDN, which was encoded with massive target sequences and DNAzyme. On the one hand, target sequences in DDN acted as self-feedback amplifiers to reactivate cascaded CHA and HCR, achieving exponential signal amplification. On the other hand, DNAzyme encoded in DDN acted as signal transducers, successively cleaving Cy5 and BHQ-2 labeled substrate S to obtain a significantly enhanced fluorescence signal. This efficient signal transduction coupling self-feedback amplification greatly improved the detection sensitivity with a limit of detection of 160 aM for miRNA-155, enabling ultrasensitive imaging of low-abundance miRNA-155 in living cells. The constructed DDN creates a promising fluorescence detection and intracellular imaging platform for low-expressed biomarkers, exhibiting tremendous potential in biomedical studies and clinical diagnosis of diseases.

The silicon nanowire field-effect transistor (SiNW FET) has been developed for over two decades as an ultrasensitive, label-free biosensor for biodetection. However, inconsistencies in manufacturing and surface functionalization at the nanoscale have led to poor sensor-to-sensor consistency in performance. Despite extensive efforts to address this issue through process improvements and calibration methods, the outcomes have not been satisfactory. Herein, based on the strong correlation between the saturation response of SiNW FET biosensors and both their feature size and surface functionalization, we propose a calibration strategy that combines the sensing principles of SiNW FET with the Langmuir-Freundlich model. By normalizing the response of the SiNW FET biosensors (Δ I / I 0 ) with their saturation response (Δ I / I 0 ) max , this strategy fundamentally overcomes the issues mentioned above. It has enabled label-free detection of nucleic acids, proteins, and exosomes within 5 min, achieving detection limits as low as attomoles and demonstrating a significant reduction in the coefficient of variation. Notably, the nucleic acid test results exhibit a strong correlation with the ultraviolet-visible (UV-vis) spectrophotometer measurements, with a correlation coefficient reaching 0.933. The proposed saturation response calibration strategy exhibits good universality and practicability in biological detection applications, providing theoretical and experimental support for the transition of mass-manufactured nanosensors from theoretical research to practical application.

Vascular defects caused by trauma or vascular diseases can significantly impact normal blood circulation, resulting in serious health complications. Vascular grafts have evolved as a popular approach for vascular reconstruction with promising outcomes. However, four of the greatest challenges for successful application of small-diameter vascular grafts are (1) postoperative anti-infection, (2) preventing thrombosis formation, (3) utilizing the inflammatory response to the graft to induce tissue regeneration and repair, and (4) noninvasive monitoring of the scaffold and integration. The present study demonstrated a basic fibroblast growth factor (bFGF) and oleic acid dispersed Ag@Fe 3 O 4 core-shell nanowires (OA-Ag@Fe 3 O 4 CSNWs) codecorated poly(lactic acid) (PLA)/gelatin (Gel) multifunctional electrospun vascular grafts (bAPG). The Ag@Fe 3 O 4 CSNWs have sustained Ag + release and exceptional photothermal capabilities to effectively suppress bacterial infections both in vitro and in vivo , noninvasive magnetic resonance imaging (MRI) modality to monitor the position of the graft, and antiplatelet adhesion properties to promise long-term patency. The gradually released bFGF from the bAPG scaffold promotes the M2 macrophage polarization and enhances the recruitment of macrophages, endothelial cells (ECs) and fibroblast cells. This significant regulation of diverse cell behavior has been proven to be beneficial to vascular repair and regeneration both in vitro and in vivo . Therefore, this study supplies a method to prepare multifunctional vascular-repair materials and is expected to represent a significant guidance and reference to the development of biomaterials for vascular tissue engineering.

The electrochemical detection of biosensors is largely governed by the changes in physical properties of redox probes, which are susceptible to electrode substrate effects, inhibiting sensor sensitivity. In this work, a light-driven electrochemical biosensor based on a hybrid nanoantenna was developed for the sensitive detection of fumonisin B1 (FB1). The hybrid nanoantenna sensing interface was constructed by coupling CdSe quantum dots (QDs)-DNA nanowire and graphdiyne oxide composites loaded with methylene blue and gold nanorods (GDYO-MB-Au NRs) using a tetrahedral DNA nanostructure, which acted as a light-driven unit and an amplification unit, respectively. The hybrid nanoantenna with light-driven properties facilitated the alteration in the chemical properties of MB at the sensing interface; that is, MB was degraded under light illumination. The stripping of the CdSe QDs-DNA nanowire triggered by the binding of FB1 could degrade the light-driven capability, thereby improving the electrochemical signal through depressing MB degradation. Taking advantage of the photodegradation of MB by the hybrid nanoantenna, the developed biosensor reduced the background signal and increased the detection sensitivity. The developed biosensor exhibited a linear detection range from 0.5 fg mL -1 to 10 pg mL -1 and a detection limit down to 0.45 fg mL -1 . This strategy shows great promise for the fabrication of highly sensitive electrochemical biosensors.

Retinal prostheses could restore image-forming vision in conditions of photoreceptor degeneration. However, contrast sensitivity and visual acuity are often insufficient. Here we report the performance, in mice and monkeys with induced photoreceptor degeneration, of subretinally implanted gold-nanoparticle-coated titania nanowire arrays providing a spatial resolution of 77.5 μm and a temporal resolution of 3.92 Hz in ex vivo retinas (as determined by patch-clamp recording of retinal ganglion cells). In blind mice, the arrays allowed for the detection of drifting gratings and flashing objects at light-intensity thresholds of 15.70-18.09 μW mm -2 , and offered visual acuities of 0.3-0.4 cycles per degree, as determined by recordings of visually evoked potentials and optomotor-response tests. In monkeys, the arrays were stable for 54 weeks, allowed for the detection of a 10-μW mm -2 beam of light (0.5° in beam angle) in visually guided saccade experiments, and induced plastic changes in the primary visual cortex, as indicated by long-term in vivo calcium imaging. Nanomaterials as artificial photoreceptors may ameliorate visual deficits in patients with photoreceptor degeneration., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

The residue of lincomycin in water will not only aggravate the drug resistance of bacteria but also cause damage to the human body through biological accumulation. In this work, an electrochemiluminescence (ECL) aptasensor for the detection of lincomycin was constructed based on polydimethyldiallylammonium chloride (PDDA) functionalized Ce-doped TbPO 4 nanowires (PDDA-TbPO 4 :Ce NWs) and silver nanoparticles (Ag NPs). TbPO 4 :Ce NWs were used as the luminophore, and PDDA was used to functionalize the luminophore to make the surface of the luminophore positively charged. The negatively charged silver nanoparticles were combined with PDDA-TbPO 4 :Ce NWs by electrostatic interaction. Ag NPs accelerated the electron transfer rate and promoted the ECL efficiency, which finally increased the ECL intensity of TbPO 4 :Ce NWs by about 4 times. Under the optimal conditions, the detection limit of the ECL sensor was as low as 4.37 × 10 -16 M, and the linear range was 1 × 10  - 15 M to 1 × 10  - 5 M, with good selectivity, stability, and repeatability. The sensor can be applied to the detection of lincomycin in water, and the recovery rate is 97.7-103.4 %, which has broad application prospects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Realizing the full potential of stretchable bioelectronics in wearables, biomedical implants and soft robotics necessitates conductive elastic composites that are intrinsically soft, highly conductive and strain resilient. However, existing composites usually compromise electrical durability and performance due to disrupted conductive paths under strain and rely heavily on a high content of conductive filler. Here we present an in situ phase-separation method that facilitates microscale silver nanowire assembly and creates self-organized percolation networks on pore surfaces. The resultant nanocomposites are highly conductive, strain insensitive and fatigue tolerant, while minimizing filler usage. Their resilience is rooted in multiscale porous polymer matrices that dissipate stress and rigid conductive fillers adapting to strain-induced geometry changes. Notably, the presence of porous microstructures reduces the percolation threshold (V c  = 0.00062) by 48-fold and suppresses electrical degradation even under strains exceeding 600%. Theoretical calculations yield results that are quantitatively consistent with experimental findings. By pairing these nanocomposites with near-field communication technologies, we have demonstrated stretchable wireless power and data transmission solutions that are ideal for both skin-interfaced and implanted bioelectronics. The systems enable battery-free wireless powering and sensing of a range of sweat biomarkers-with less than 10% performance variation even at 50% strain. Ultimately, our strategy offers expansive material options for diverse applications., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

Biomimetic humidity sensors offer a low-power approach for respiratory monitoring in early lung-disease diagnosis. However, balancing miniaturization and energy efficiency remains challenging. This study addresses this issue by introducing a bioinspired humidity-sensing neuron comprising a self-assembled peptide nanowire (NW) memristor with unique proton-coupled ion transport. The proposed neuron shows a low Ag + activation energy owing to the NW and redox activity of the tyrosine (Tyr)-rich peptide in the system, facilitating ultralow electric-field-driven threshold switching and a high energy efficiency. Additionally, Ag + migration in the system can be controlled by a proton source owing to the hydrophilic nature of the phenolic hydroxyl group in Tyr, enabling the humidity-based control of the conductance state of the memristor. Furthermore, a memristor-based neuromorphic perception neuron that can encode humidity signals into spikes is proposed. The spiking characteristics of this neuron can be modulated to emulate the strength-modulated spike-frequency characteristics of biological neurons. A three-layer spiking neural network with input neurons comprising these highly tunable humidity perception neurons shows an accuracy of 92.68% in lung-disease diagnosis. This study paves the way for developing bioinspired self-assembly strategies to construct neuromorphic perception systems, bridging the gap between artificial and biological sensing and processing paradigms., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

The concentration elevation of myocardial microRNA (miRNA) biomarker is associated with the pathogenic process of acute myocardial infarction (AMI), and sensitive quantification of myocardial miRNA biomarker plays an important role for early AMI diagnosis and its treatment. In response, this work describes an ultrasensitive and non-label electrochemical biosensor for the assay of myocardial miRNA based on cascade signal amplifications integrated by DNAzyme walker and hemin/G-quadruplex nanowires. The DNAzyme walker is activated by presence of target miRNAs to move along the electrode surface to cyclically cleave the substrate hairpins to release G-quadruplex segments, which further trigger the in situ formation of many hemin/G-quadruplex nanowires. The large amounts of hemin intercalated into the DNA nanowires subsequently generate drastically magnified electrochemical current signals for highly sensitive label-free assay of myocardial miRNAs down to 15.7 fM within dynamic range of 100 fM to 10 nM. Such a biosensor also has high selectivity and can monitor myocardial miRNAs in diluted serums at low levels, providing a sensitive and reliable platform for diagnosing infarct-associated cardiovascular diseases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)