Search

Understanding the role of oxygen vacancies in the phase transformation of metal oxide nanomaterials is fundamental to design more efficient opto-electronic devices for a variety of applications, including sensing, spintronics, photocatalysis, and photo-electrochemistry. However, the structural mechanisms behind the phase transformation in reducible oxides remain poorly described. Here, we compare P25 and black TiO2 during the thermal anatase-to-rutile transformation using in situ synchrotron powder diffraction. The precise measurement of the phase fractions, unit cell parameters, and Ti-O bond sheds light on the phase transformation dynamics. Notably, we observe distinct temperature-dependent shifts in the relative phase fractions of anatase and rutile in both materials highlighting the role of the oxygen vacancy in promoting the phase transformation. We employ bond valence concepts for structural modeling, revealing unique trends in temperature evolution of Ti-O distances of black rutile, confirming that this TiO2 phase is preferentially reduced over anatase. These findings not only enhance our understanding of phase transitions in TiO2 but also open new ways for the design of advanced photocatalytic materials through targeted phase control.

This article aims to present the results of a national, cross-sectional, voluntary, online survey on the presence and roles of associations of breast cancer patients and volunteers in Italian specialist breast centres. The survey was developed according to standard methods. The questionnaire was pre-tested by a random sample of three breast centres, loaded onto the SurveyMonkey platform, and piloted by one volunteer breast centre. The breast centre clinical leads were invited to participate via email. A link to the online instrument was provided. No financial incentives were offered. The results were reported using standard descriptive statistics. The response rate was 82/128 (65%). Members of associations were routinely present in 70% Italian breast centres. Breast centres most often reporting their presence were those certified by the European Society of Breast Cancer Specialists. Patient support (reception and information, listening, identification of needs, and psychological support) was the primary area where associations were reported to offer services. The magnitude of this phenomenon warrants a study to investigate the impact of the activities of associations on the quality of life of patients and on the cost–benefit ratio of the service, and the modes of their interactions with the nursing staff and the medical staff.

Abstract Background Despite recommendations, mammography screening is often insufficiently integrated into specialist breast centres. A national, cross-sectional, voluntary, online survey on this issue was carried out among the Italian breast centres associated with Senonetwork, the Italian network of breast cancer services. Methods A 73-item questionnaire was created, pre-tested and piloted. Centres integrating and not integrating a screening programme were compared using the unified theory of acceptance and use of technology (UTAUT) model. Centres’ clustering was performed using the Gower’s distance metric. Groups and clusters were compared with the equality-of-means test. Results The response rate was 82/128 (65%). Overall, 84% (69/82) breast centres reported a collaboration with a screening programme in performing and/or reading mammograms and in the diagnostic work-up of women with abnormal screening results. The same proportion was observed among those centres responding to all questions (62/74). Performance expectancies (or the perceived usefulness of integration in terms of clinical quality, patient convenience, ease of job, and professional growth), satisfaction and motivation were higher in those centres collaborating with the screening programme. Effort expectancy indicators (or the degree to which the respondents believe that the integration is easy to implement) and those concerning the existence of facilitating conditions were lower both in centres collaborating and not collaborating with the screening programme. Among the former, six clusters of centres, distributed from ‘no integration’ to ‘high’, were identified. In cluster analysis, the highest level of integration was associated with higher agreement that integration eases the job, offers better opportunities for professional growth, and makes the working environment more satisfactory. The least integrated cluster assigned the lowest score to the statement that local health authority made available the resources needed. Conclusions While confirming the positive effects of integrating screening programmes into breast centres, this survey has brought to light specific difficulties that must be faced. The results provide insights into the importance of integration focusing on the perspectives of professional career and motivation. The deficiency of facilitating conditions to integration is modifiable. Screening professionals’ societies may have a role as initiators of the integration. Other supporting actions may be included in health laws at the national and regional level.

Solar-thermal technologies for converting chemicals using thermochemistry require extreme light concentration. Exploiting plasmonic nanostructures can dramatically increase the reaction rates by providing more efficient solar-to-heat conversion by broadband light absorption. Moreover, hot-carrier and local field enhancement effects can alter the reaction pathways. Such discoveries have boosted the field of photothermal catalysis, which aims at driving industrially-relevant chemical reactions using solar illumination rather than conventional heat sources. Nevertheless, only large arrays of plasmonic nano-units on a substrate, i.e., plasmonic metasurfaces, allow a quasi-unitary and broadband solar light absorption within a limited thickness (hundreds of nanometers) for practical applications. Through moderate light concentration (∼10 Suns), metasurfaces reach the same temperatures as conventional thermochemical reactors, or plasmonic nanoparticle bed reactors reach under ∼100 Suns. Plasmonic metasurfaces, however, have been mostly neglected so far for applications in the field of photothermal catalysis. In this Perspective, we discuss the potentialities of plasmonic metasurfaces in this emerging area of research. We present numerical simulations and experimental case studies illustrating how broadband absorption can be achieved within a limited thickness of these nanostructured materials. The approach highlights the synergy among different enhancement effects related to the ordered array of plasmonic units and the efficient heat transfer promoting faster dynamics than thicker structures (such as powdered catalysts). We foresee that plasmonic metasurfaces can play an important role in developing modular-like structures for the conversion of chemical feedstock into fuels without requiring extreme light concentrations. Customized metasurface-based systems could lead to small-scale and low-cost decentralized reactors instead of large-scale, infrastructure-intensive power plants.

Titanium nitride (TiN) has recently gained considerable interest because of its remarkable plasmonic properties and for its strong electron–phonon (e–ph) coupling, leading to extremely fast (<100 fs) electron‐lattice cooling. Here, the generation of coherent phonons in TiN films is reported, along with their real‐time detection by means of broadband transient reflection spectroscopy with sub‐15‐fs temporal resolution. The measurements show damped oscillations, superimposed to excited state electronic decay. A coherent vibrational mode is revealed, with ≈10 THz frequency ascribed to defect‐activated normal modes, consistent with spontaneous Raman scattering data, and a dephasing time of ≈250 fs. Two π‐phase flips are also observed located at photon energies corresponding to interband optical transitions (at 3.2 and 2.5 eV), ascribed to selective coupling of the vibrational mode to these transitions; the energy modulation induced by the vibrational coherence is evaluated. It is shown that the displacive excitation of coherent phonons model describes the coherent response in terms of temporal behavior and of spectral amplitude profile. Overall, a comprehensive and detailed analysis of coherent phonons in TiN films, so far undected, is provided and relevant information on TiN photo‐physical properties, potentially useful for its applications, is given. [ABSTRACT FROM AUTHOR]

Double metal cation halide perovskites are promising alternatives to lead halide perovskites due to their exceptional compositional flexibility and stability. However, their utilization in solar-light harvesting applications has been hindered by their large band gap and the complexity of producing doped or alloyed materials with desirable optoelectronic properties. In this study, we report the colloidal synthesis of iron-doped Cs2NaInCl6 double perovskite nanocrystals (NCs), leading to a significant extension of the absorption edge from 330 nm to 505 nm. We also demonstrate that simultaneous doping with Fe3+ and Ag+ ions allows significant reduction of the optical band gap and precise tuning of electronic band structures of the resulting NCs. The enhanced absorption in the visible region is attributed to the substitution of In-5s by the Fe-3d state, while the introduction of the Ag 4d state upshifts the valence band maximum, inducing a transformative change in the band structure, as confirmed by density functional theory (DFT) calculations. Remarkably, by precisely controlling the band positions of the Fe3+-doped Cs2Ag0.5Na0.5InCl6 NCs, we accomplished the selective photocatalytic reduction of CO2 into CH4, making them readily available for solar-energy conversion technologies. [ABSTRACT FROM AUTHOR]

In the present investigation, Cu2O-based composites were successfully prepared through a multistep method where cubic Cu2O nanoparticles (CU Cu2O) have been grown on Reduced Graphene Oxide (RGO) nanosheets. The structural and morphological properties of the materials have been studied through a comprehensive characterization, confirming the coexistence of crystalline Cu2O and RGO. Microscopical imaging revealed the intimate contact between the two materials, affecting the size and the distribution of Cu2O nanoparticles on the support. The features of the improved morphology strongly affected the electrochemical behavior of the composites, increasing the activity and the faradaic efficiencies towards the electrochemical CO2 reduction reaction process. CU Cu2O/RGO 2:1 composite displayed selective CO formation over H2, with higher currents compared to pristine Cu2O (−0.34 mA/cm2 for Cu2O and −0.64 mA/cm2 for CU Cu2O/RGO 2:1 at the voltage of −0.8 vs. RHE and in a CO2 atmosphere) and a faradaic efficiency of 50% at −0.9 V vs. RHE. This composition exhibited significantly higher CO production compared to the pristine materials, indicating a favorable *CO intermediate pathway even at lower voltages. The systematic investigation on the effects of nanostructuration on composition, morphology and catalytic behavior is a valuable solution for the formation of effective interphases for the promotion of catalytic properties providing crucial insights for future catalysts design and applications. [ABSTRACT FROM AUTHOR]

The pandemic of Covid-19 represents a chance to rethink the equilibrium of our territories and cities. The sudden revision of rules of social coexistence, the temporary suspension of activities, the modification of everyday gestures, physical public spaces replaced by digital spaces, are only some of the phenomena which happened simultaneously in 2020 due to the pandemic. From the will to reflect in a collective way on the implications of the health emergency on our ways of living, and from the project will to use the crisis as an experimentation field of new practices of sharing and elaboration of future urban scenarios, the campaign #MyCityofTomorrow of the spin-off Urban LIFE (University of Florence) was designed as an online platform of open dialogue on the topics which inform urban design and planning, in its broader sense, a discussion table to orient the restarts towards a more sustainable future.

Abstract Background Up to 10% of individuals with breast cancer (BC) belong to families with hereditary syndromes. The aim of this study was to develop an instrument to identify individuals/families at high‐hereditary risk for BC and offer dedicated surveillance programs according to different risks. Methods The instrument consisted of a primary questionnaire collecting history of BC and ovarian cancer (OC). This questionnaire was applied to women enrolled in the Emilia‐Romagna Breast Cancer Screening Program. General practitioners (GPs) and specialists could propose the same questionnaire too. Women with a score of ≥ 2, were invited to complete an oncogenetic counseling. According to the Tyrer‐Cuzick evaluation, women considered at high risk were invited to involve the most representative alive individual of the family affected with BC/OC for BRCA1/2 genetic testing. Results Since January 2012 and December 2016, 660 040 women were evaluated by the regional screening program, of which 22 289 (3.5%) were invited to the Spoke evaluation, but only 5615 accepted (25.2%). Totally, also considering women sent by GPs and specialists, 11 667 were assessed and 5554 were sent to the Hub evaluation. Finally, 2342 (42.8%) women fulfilled the criteria for genetic testing, and 544 (23.2%) resulted BRCA1/2 mutation carriers. Conclusions To our knowledge, this is the first regional population‐based multistep model that is aimed to identify individuals with BRCA1/2 mutations and to offer an intensive surveillance program for hereditary‐high risk women. This tool is feasible and effective, even if more efforts must be performed to increase the acceptance of multiple assessments by the study population.

Understanding the role of oxygen vacancies in the phase transformation of metal oxide nanomaterials is fundamental to design more efficient opto-electronic devices for a variety of applications, including sensing, spintronics, photocatalysis, and photo-electrochemistry. However, the structural mechanisms behind the phase transformation in reducible oxides remain poorly described. Here, we compare P25 and black TiO2 during the thermal anatase-to-rutile transformation using in situ synchrotron powder diffraction. The precise measurement of the phase fractions, unit cell parameters, and Ti-O bond sheds light on the phase transformation dynamics. Notably, we observe distinct temperature-dependent shifts in the relative phase fractions of anatase and rutile in both materials highlighting the role of the oxygen vacancy in promoting the phase transformation. We employ bond valence concepts for structural modeling, revealing unique trends in temperature evolution of Ti-O distances of black rutile, confirming that this TiO2 phase is preferentially reduced over anatase. These findings not only enhance our understanding of phase transitions in TiO2 but also open new ways for the design of advanced photocatalytic materials through targeted phase control. [ABSTRACT FROM AUTHOR]