Search

Static and cyclic fracture properties (Modes I, III, and I/III) of cement emulsified asphalt mortar at three frequencies were investigated in terms of the fracture energy and fatigue life, respectively. For this to achieve, 576 edge notched disk bend specimens with 16 haphazard mix designs including, disparate bitumen‐to‐cement (B/C), water‐to‐cement (W/C) ratios, and cement contents (C) were tested. By developing statistical models (at the 5% significance level, p value < 0.05), the findings revealed that under static loading, the fracture energy got highest in tearing mode and lowest in opening mode. In all fracture modes, the fracture energy decreased with an increase of C and decrease of B/C while the mortar's fatigue life augmented due to a rise in C and B/C. Moreover, the fatigue life gained an increase with the increase in the fracture energy, loading frequency, and Me in the nonlinear trend. The utmost variation of fatigue life was explained with the increase of fracture energy which had the greatest effect in mode‐III loading. Highlight: Predicting CEAM's static and cyclic fracture behavior (I/III) at three frequencies by RSM.Under static loading, the fracture energy is highest in mode III and lowest in mode I.Fatigue life increased with the increase in C, A/C, fracture energy, and loading frequency.Cement content had the greatest nonlinear effect on fatigue life in the mixed‐mode I/III. [ABSTRACT FROM AUTHOR]

This paper presents the flexural response of reinforced geopolymer concrete (RGPC) beam. A commercial finite element (FE) software ABAQUS has been used to perform a structural behavior of RGPC beam. Using parameters such: stress, strain, Young's modulus, and Poisson's ratio obtained from experimental results, a beam model has been simulated in ABAQUS. The results from experimental test and ABAQUS simulation were compared. Due to friction forces at the supports and loading rollers; slip occurring, the actual deflection of RGPC beam from experimental test results were slightly different from the results of ABAQUS. And there is good agreement between the crack patterns of fly-ash based geopolymer concrete generated by FE analysis using ABAQUS, and those in experimental data. [ABSTRACT FROM AUTHOR]