Search

Cementless implant use continues to increase primarily due to increased numbers of younger and obese patients opting for primary total knee arthroplasty (TKA). Given the increased use of cementless implants, the purpose of this study was to evaluate the midterm clinical performance of cementless TKA using a highly porous tibial baseplate compared with its cemented counterpart of the same system. We conducted a retrospective case-control study of 400 patients undergoing primary TKA that included 200 patients with cementless components matched for age and body mass index (BMI) to 200 patients with cemented implants of the same implant design with a 5-year follow-up. We evaluated clinical results, complications, revisions, and overall survivorship between the cohorts. Statistical analysis was performed using student t -test and chi-square analysis. There was no statistical difference in age (64.3 vs. 64.3 p  = 0.81), BMI (34 vs. 33.1 p  = 0.19), preoperative Knee Society Score (KSS) function (41 vs. 32.3 p  = 0.22), and preoperative KSS knee score (39.2 vs. 38.3 p  = 0.54) between the cementless and cemented cohorts, respectively. The cementless group had seven revisions, while the cemented group had nine revisions ( p  = 0.609). The cementless group had one revision due to aseptic loosening versus five in the cemented group ( p  = 0.09). Postoperative 5-year KSS knee scores were 92.84 versus 91.75 ( p  = 0.386) and function scores were 81.81 versus 69.65 ( p  = 0.00004) in the cementless and cemented groups, respectively. The cementless group had survivorship of 96.5% for all-cause revision compared with 95.5% in the cemented group at 5-year follow-up ( p  = 0.60). Cementless TKA using a highly porous tibial baseplate showed excellent midterm results with one case of aseptic loosening at 5-year follow-up and with similar Knee Society outcome scores and survivorship compared with the cemented group. Cementless TKA demonstrated noninferiority to cemented TKA and could be used as an alternative mode of fixation in patients opting for primary TKA. Additional long-term follow-up is needed to determine if cementless TKA can demonstrate improved survivorship over cemented TKA., Competing Interests: A.L.M. reports the following declarations: 1) Stryker: IP royalties, Paid consultant, Paid presenter or speaker, Research support; 2) Parvizi Surgical Innovations: Stock or stock options. All other authors have no declarations., (Thieme. All rights reserved.)

Aims: The use of cementless total knee arthroplasty (TKA) components has increased during the past decade. The initial design of cementless metal-backed patellar components had shown high failure rates due to many factors. The aim of this study was to evaluate the clinical results of a second-generation cementless, metal-backed patellar component of a modern design., Methods: This was a retrospective review of 707 primary TKAs in 590 patients from a single institution, using a cementless, metal-backed patellar component with a mean follow-up of 6.9 years (2 to 12). A total of 409 TKAs were performed in 338 females and 298 TKAs in 252 males. The mean age of the patients was 63 years (34 to 87) and their mean BMI was 34.3 kg/m 2 (18.8 to 64.5). The patients were chosen to undergo a cementless procedure based on age and preoperative radiological and intraoperative bone quality. Outcome was assessed using the Knee Society knee and function scores and range of motion (ROM), complications, and revisions., Results: A total of 24 TKAs (3.4%) in 24 patients failed and required revision surgery, of which five were due to patellar complications (0.71%): one for aseptic patellar loosening (0.14%) and four for polyethylene dissociation (0.57%). A total of 19 revisions (2.7%) were undertaken in 19 patients for indications which did not relate to the patella: four for aseptic tibial loosening (0.57%), one for aseptic femoral loosening (0.14%), nine for periprosthetic infection (1.3%), one for popliteus impingement (0.14%), and four for instability (0.57%). Knee Society knee and function scores, and ROM, improved significantly when comparing pre- and postoperative values. Survival of the metal-backed patellar component for all-cause failure was 97.5% (95% confidence interval 94.9% to 100%) at 12 years., Conclusion: The second-generation cementless TKA design of metal-backed patellar components showed a 97.5% survival at 12 years, with polyethylene dissociation from the metal-backing being the most common cause of patellar failure. In view of the increased use of TKA, especially in younger, more active, or obese patients, these findings are encouraging at mean follow-up of seven years., Competing Interests: J. F. Baker reports research support to their institution from Zimmer Biomet, unrelated to this study. A. C. Jouflas reports support for attending meetings and/or travel from the University of Louisville Department of Orthopaedic Surgery, unrelated to this study. A. L. Malkani reports IP royalties, speaker and consultant honoraria, and research support from Stryker Orthopedics, and holds stock or stock options in Parvizi Surgical Innovation, outside the submitted work., (© 2023 The British Editorial Society of Bone & Joint Surgery.)

Background: Heterotopic ossification (HO) is a pathologic bone formation in extra skeletal tissue and articular space. This was an objection to nailing of femur fractures across the knee; however, this has not been the case in many thousands of cases. Nonetheless, we present a patient in who placement of a retrograde nail resulted in calcification in the knee requiring excision., Case Presentation: A 42-year-old male presented to the clinic complaining of pain, popping, clicking, and mocking in the right knee, especially in the patellar region. Nine months prior he suffered an ipsilateral femur fracture that was treated with a retrograde intramedullary nail. X-ray and CT scan were used to confirm the presentation of a heterotopic bone mass in the Hoffa area of the right knee. The patient underwent an arthrotomy for excision of the bone mass. The bone mass was excised, but bone in the ACL was not removed. The patient experienced pain relief and improved range of motion following excision., Conclusion: Intraarticular heterotopic ossification is an infrequent event. We present a case of heterotopic ossification in the knee following retrograde nailing. The patient experienced improved symptoms and range of motion after excision of the intraarticular heterotopic bone mass., (© 2023. The Author(s), under exclusive licence to Springer-Verlag France SAS, part of Springer Nature.)

Background: Preoperative planning is important for successful total hip arthroplasty (THA) and has been historically performed using acetate templates. Digital software templating has been adopted for evaluating implant size, position, and alignment. Commercial software can be expensive, but free programs exist. Detroit Bone Setter (detroitbonesetter.com, Detroit, MI) is a freely available templating program, but hasn't been validated. Our study reports this program's accuracy for templating THA., Methods: Sixty-five patients undergoing THA between 2017 and 2022 at 2 hospitals were included. All cases were templated by the senior author or orthopaedic trauma fellow prospectively or retrospectively in a blinded fashion. Direct anterior or posterior approaches were used based on attending surgeon's preference. A student's t-test was used to compare means of templated vs actual implant sizes of femoral and acetabular components., Results: There was no significant difference between implanted (mean [M] = 6.4, standard deviation [SD] = 2.0) and templated femoral component sizes (M = 5.7, SD = 2.1). There was a significant difference between implanted (M = 57.0, SD = 3.9) and templated acetabular component sizes (M = 53.4, SD = 3.0). Bland-Altman testing demonstrated femoral components with positive measurement bias of 0.62, indicating slight overestimation of implant size. Acetabular component size was overestimated with positive measurement bias of 3.6 mm., Conclusions: Detroit Bone Setter is advantageous as it is freely available and supports most major company implants. It accurately templated femoral component size but consistently overestimated acetabular component size by 3.6 mm. Further studies are needed prior to recommending its routine use for templating THA when other validated methods exist. It could be used with caution when no other methods are available., (© 2023 The Authors.)

Morbidly obese patients undergoing cemented primary total knee arthroplasty (TKA) can pose a challenging problem with implant survivorship due to greater stress at the cement-bone interface. With the advent of additive manufacturing (three-dimensional printing), highly porous implants are now readily available. The purpose of this study was to review the results of primary TKA in the morbidly obese (body mass index [BMI] ≥ 40) patient using a highly porous cementless tibial baseplate. This is a retrospective study of 167 TKAs in patients with morbid obesity undergoing primary cementless TKA with a minimum 5-year follow-up. A total of 6 patients died and 14 were lost to follow-up, leaving 147 TKAs in 136 patients with a mean follow-up of 66 months (range 60-79 months). The average age was 59 years (range 36-84 years) and average BMI was 45 kg/m 2 (range 39.5-63.9). Clinical results, patient-reported outcome measures, radiographs, and complications were reviewed. There were 9 failures requiring revision, including 3 for aseptic tibial loosening (2.0%), 2 for deep infection (1.4%), 2 for patellar resurfacing (1.4%), 1 for patella instability (0.7%), and 1 for extensor mechanism rupture (0.7%). Knee Society Score (KSS) improved from 48 to 90 at 2- and 5-year follow-up. KSS function score improved from 49 to 68 and 79 at 2- and 5-year follow-up, respectively. Survivorship with aseptic loosening as the endpoint was 98.0% at 5 years. Cementless TKA using a highly porous tibial baseplate in morbidly obese patients demonstrated excellent clinical results with 98% survivorship at 5 years and appears to offer durable long-term biologic fixation as an alternative to mechanical cement fixation in this challenging group of patients., Competing Interests: A.M. declares the following conflicts of interest: Journal of Arthroplasty: Editorial or governing board; Stryker: IP royalties; paid consultant; paid presenter or speaker; research support S.H. declares the following conflicts of interest: Orthopedics: Editorial or governing board SLACK Incorporated: Editorial or governing board; Stryker: IP royalties; Paid consultant; Paid presenter or speaker; Stock or stock Options; Thieme, Inc., Journal of Hip Surgery, Journal of Knee Surgery: Editorial or governing board; Thieme, Inc., Journal of Knee Surgery, Journal of Hip Surgery: Publishing royalties, financial or material support. The rest authors declare no conflict of interest., (Thieme. All rights reserved.)

Background: Historically, 1st generation metal-backed cementless patellar implants demonstrated high failure rates due to multiple factors. The 2nd generation cementless implants were developed with purported improvements in component design and polyethylene wear characteristics. This study evaluated clinical results of a current generation cementless metal-backed patellar implant with a minimum 5-year follow-up., Methods: One hundred and thirty-six primary total knee arthroplasties (TKAs) with metal-backed cementless patellae were compared to 183 cemented patellae with the same implant design. The cementless group mean age was 61 years (range, 40 to 81), mean body mass index (BMI) of 34.9 (range, 22.6 to 64.5), and mean follow-up of 10 years (range, 5 to 13). The cemented group mean age was 65 years (range, 32 to 89), mean BMI of 32.5 (range, 18.2 to 56.6), and mean follow-up of 10 years (range, 5 to 12). Significant demographic differences of age (P < .001), BMI (P < .01), and sex (P < .001) were found, with cementless patients being younger, heavier, and with more men., Results: There were no statistical differences in non-revision procedures (P = .214), TKA revisions (P = .639), patellar revisions (P = .151), and patellar aseptic loosening (P = .737). The 10-year survivorship of the cementless metal-backed patella was 95.9% with all-cause failure as the endpoint. The 10-year survivorship of the cemented patellar component was 98.9%., Conclusion: This study demonstrated noninferiority of a 2nd generation HA-coated cementless metal-backed patellar implant in primary TKA compared to cemented patellae with 10-year survivorship of 95.9%. Advances in implant design and polyethylene wear properties have led to improved clinical results with metal-backed patellar components in primary TKA., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: The Matrigel assay provides a versatile platform to examine vessel growth. Similarly, the microsphere method is used extensively in laboratory animals to measure tissue-specific blood flow. However, microsphere models have not been used with Matrigel to study angiogenesis in live animals. The goal of this study was to develop a novel technique to directly measure blood flow with microspheres in vessels grown in Matrigel in vivo., Methods: In calves (n = 10, 110 ± 5 kg), 5 mL of Matrigel was injected subcutaneously. After 10 d, a percutaneous cardiac catheterization was performed. Fluorescent-labeled 15 μm microspheres were injected into the left ventricular chamber to distribute throughout the body based on systemic blood flow patterns. Afterwards, Matrigel plugs were removed, and animals were recovered. Flow cytometry was used to count microspheres and quantify blood flow within the plug. FITC-conjugated isolectin-B4 staining was performed to quantify Matrigel capillary density. Flow cytometry was performed to quantify circulating plasma CD34(+) cells. Linear regressions were used to determine relationships between Matrigel blood flow, Matrigel capillary density, and plasma CD34(+) cells., Results: Over 10 d, small-caliber vessels grew into subcutaneous Matrigel plugs. Microspheres lodged throughout the plug and indicated that newly grown vessels in the Matrigel were functional and able to accommodate blood flow. Modest associations between Matrigel blood flow, Matrigel capillary density, and circulating plasma CD34(+) cells were noted., Conclusion: This method provides a novel and cost-effective technique to measure blood flow within vessels grown in Matrigel in vivo., (Copyright © 2012 Elsevier Inc. All rights reserved.)