Search

The consequences of crowding on the dynamic conformational ensembles of intrinsically disordered proteins (IDPs) remain unresolved because of their ultrafast motion. Here, we report crowder-induced interactions and conformational dynamics of a prototypical multistimuli-responsive IDP, Rec1-resilin. The effects of a range of crowders of varying sizes, forms, topologies, and concentrations were examined using spectroscopic, spectrofluorimetric, and contrast-matching small- and ultrasmall-angle neutron scattering investigation. To achieve sufficient neutron contrast against the crowders, deuterium-labeled Rec1-resilin was biosynthesized successfully. Moreover, the ab initio “shape reconstruction” approach was used to obtain three-dimensional models of the conformational assemblies. The IDP revealed crowder-specific systematic extension and compaction with the level of macromolecular crowding. Last, a robust extension-contraction model has been postulated to capture the fundamental phenomena governing the observed behavior of IDPs. The study provides insights and fresh perspectives for understanding the interactions and structural dynamics of IDPs in crowded states.

The current perspective presents an outlook on developing gut-like bioreactors with immobilized probiotic bacteria using cellulose hydrogels. The innovative concept of using hydrogels to simulate the human gut environment by generating and maintaining pH and oxygen gradients in the gut-like bioreactors is discussed. Fundamentally, this approach presents novel methods of production as well as delivery of multiple strains of probiotics using bioreactors. The relevant existing synthesis methods of cellulose hydrogels are discussed for producing porous hydrogels. Harvesting methods of multiple strains are discussed in the context of encapsulation of probiotic bacteria immobilized on cellulose hydrogels. Furthermore, we also discuss recent advances in using cellulose hydrogels for encapsulation of probiotic bacteria. This perspective also highlights the mechanism of probiotic protection by cellulose hydrogels. Such novel gut-like hydrogel bioreactors will have the potential to simulate the human gut ecosystem in the laboratory and stimulate new research on gut microbiota.

In recent years, significant attention has been paid towards the study and application of mixed matrix nanofibrous membranes for water treatment. The focus of this study is to develop and characterize functional polysulfone (PSf)-based composite nanofiltration (NF) membranes comprising two different oxides, such as graphene oxide (GO) and zinc oxide (ZnO) for arsenic removal from water. PSf/GO- and PSf/ZnO-mixed matrix NF membranes were fabricated using the electrospinning technique, and subsequently examined for their physicochemical properties and evaluated for their performance for arsenite–As(III) and arsenate–As(V) rejection. The effect of GO and ZnO on the morphology, hierarchical structure, and hydrophilicity of fabricated membranes was studied using a scanning electron microscope (SEM), small and ultra-small angle neutron scattering (USANS and SANS), contact angle, zeta potential, and BET (Brunauer, Emmett and Teller) surface area analysis. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to study the elemental compositions and polymer-oxide interaction in the membranes. The incorporation of GO and ZnO in PSf matrix reduced the fiber diameter but increased the porosity, hydrophilicity, and surface negative charge of the membranes. Among five membrane systems, PSf with 1% ZnO has the highest water permeability of 13, 13 and 11 L h−1 m−2 bar−1 for pure water, As(III), and As(V)-contaminated water, respectively. The composite NF membranes of PSf and ZnO exhibited enhanced (more than twice) arsenite removal (at 5 bar pressure) of 71% as compared to pristine PSf membranes, at 43%, whereas both membranes showed only a 27% removal for arsenate.

Stable dispersions of pristine graphene in innocuous mediums are highly desired for the use of this 2D material into a variety of practical applications. Here, we report the direct layer-by-layer f...

Resilin-like polypeptides (RLPs) are an important class of intrinsically disordered multistimuli-responsive bioelastomers. The nanostructure of RLPs in solution has been extensively studied in the past few years, from dilute to molecular crowding conditions, and with the addition of rigid biopolymers. Modification of the hierarchical network structure of RLP hydrogels using graphene oxide (GO) as an additive is a burgeoning prospect for their application in the bioelectronic and biomedical fields. In this work, we systemically study the influence of incorporating GO into RLP (Rec1) hydrogels for tuning their physicochemical properties and understanding the gel-cell interactions. The nature of GO interaction with the Rec1 hydrogel is deduced from the change in structure and properties. Contrast-matching small-angle and ultra-small-angle neutron-scattering techniques were used to investigate the network structure of the Rec1 hydrogel and how this structure is modified in the presence of GO. Incorporation of GO in the Rec1 hydrogel matrix results in an increase in the micromechanical resilience, equilibrium water swelling ratio, micropore size, cross-linked domain size; with a decrease in the cross-link density, mass fractal cluster size, local compressive elastic modulus, and cell inert characteristics. These property combinations achieved with the addition of GO further open up the available structure-property design window for RLP applications.

Magnesium (Mg) and its alloys are promising biodegradable metallic implant materials. However, their clinical applications are limited by their fast corrosion rate in the biological environment. In this work, with an outlook to improve the

Polyelectrolyte gels are an important class of polymer gels and a versatile platform with charged polymer networks with ionisable groups. They have drawn significant recent attention as a class of smart material and have demonstrated potential for a variety of applications. This review begins with the fundamentals of polyelectrolyte gels, which encompass various classifications (i.e., origin, charge, shape) and crucial aspects (ionic conductivity and stimuli responsiveness). It further centralises recent developments of polyelectrolyte gels, emphasising their synthesis, structure–property relationships and responsive properties. Sequentially, this review demonstrates how polyelectrolyte gels’ flourishing properties create attractiveness to a range of applications including tissue engineering, drug delivery, actuators and bioelectronics. Finally, the review outlines the indisputable appeal, further improvements and emerging trends in polyelectrolyte gels.

In recent years, technology for the fabrication of mixed-matrix membranes has received significant research interest due to the widespread use of mixed-matrix membranes (MMMs) for various separation processes, as well as biomedical applications. MMMs possess a wide range of properties, including selectivity, good permeability of desired liquid or gas, antifouling behavior, and desired mechanical strength, which makes them preferable for research nowadays. However, these properties of MMMs are due to their tailored and designed structure, which is possible due to a fabrication process with controlled fabrication parameters and a choice of appropriate materials, such as a polymer matrix with dispersed nanoparticulates based on a typical application. Therefore, several conventional fabrication methods such as a phase-inversion process, interfacial polymerization, co-casting, coating, electrospinning, etc., have been implemented for MMM preparation, and there is a drive for continuous modification of advanced, easy, and economic MMM fabrication technology for industrial-, small-, and bulk-scale production. This review focuses on different MMM fabrication processes and the importance of various parameter controls and membrane efficiency, as well as tackling membrane fouling with the use of nanomaterials in MMMs. Finally, future challenges and outlooks are highlighted.

Bioadhesives have reached significant milestones over the past two decades. Research has shown not only to produce adhesives capable of adhering to dry tissue but recently wet tissue as well. However, most bioadhesives developed have exhibited high adhesion strength yet lack other properties required for versatility in application, such as elasticity, biocompatibility and biodegradability. Adapting from limitations met from early bioadhesives and meeting the current demand allows novel bioadhesives to reach new milestones for the future. In this review, we overview the progression and variations of bioadhesives, current trends, characterisation techniques and conclude with future perspectives for bioadhesives for tissue engineering applications.

The use of additive manufacturing (AM) has moved well beyond prototyping and has been established as a highly versatile manufacturing method with demonstrated potential to completely transform traditional manufacturing in the future. In this paper, a comprehensive review and critical analyses of the recent advances and achievements in the field of different AM processes for polymers, their composites and nanocomposites, elastomers and multi materials, shape memory polymers and thermo-responsive materials are presented. Moreover, their applications in different fields such as bio-medical, electronics, textiles, and aerospace industries are also discussed. We conclude the article with an account of further research needs and future perspectives of AM process with polymeric materials.

Herein we explore a combination of anodization induced micro-roughness and biomimetic coating on pure magnesium (Mg) metal at different applied voltages to control adhesion, biodegradation, and corrosion performance in simulated body fluid solution. The anodic film was fabricated using two different potentials, 3 and 5 V, respectively, to create microroughness on the Mg surface. The microroughened Mg surface was subsequently coated with a biomimetic silk thin film; and the characteristics of the treated Mg-substrates were evaluated using various spectroscopic, microscopic, immersion, and electrochemical techniques. A number of independent measurements, including hydrogen evolution, weight loss and electrochemical methods were employed to assess the corrosion characteristics. The silk-coated anodized samples revealed dramatically reduced degradation rate in terms of volume of hydrogen gas generation and weight loss compared to the respective anodized but uncoated, which revealed that optimized biomimetic silk-coated Mg surface (anodized at 5 V and subsequently biomimetic silk-coated ANMg5V) exhibited the best corrosion performance among all other tested samples. The ANMg5V Silk showed the highest polarization resistance (46.12 kΩ·cm2), protection efficiency (>0.99) and lowest corrosion rate (only 0.017 mm/year) relative to untreated Mg (8.457 mm/year), and anodized Mg (1.039 for anodized at 3 V and 0.986 for anodized at 5 V) surface due to the formation of a pore-free dense biomimetic protective film over Mg surface. The results of the cytotoxicity test confirm that silk-coated samples are significantly less cytotoxic compared to bare and anodized Mg samples. With enhanced corrosion resistance and cytocompatibility, silk-coated Mg could be a potential material for clinical applications.

Arsenic (As) removal is of major significance because inorganic arsenic is highly toxic to all life forms, is a confirmed carcinogen, and is of significant environmental concern. As contamination in drinking water alone threatens more than 150 million people all over the world. Therefore, several conventional methods such as oxidation, coagulation, adsorption, etc., have been implemented for As removal, but due to their cost-maintenance limitations; there is a drive for advanced, low cost nanofiltration membrane-based technology. Thus, in order to address the increasing demand of fresh and drinking water, this review focuses on advanced nanofiltration (NF) strategy for As removal to safeguard water security. The review concentrates on different types of NF membranes, membrane fabrication processes, and their mechanism and efficiency of performance for removing As from contaminated water. The article provides an overview of the current status of polymer-, polymer composite-, and polymer nanocomposite-based NF membranes, to assess the status of nanomaterial-facilitated NF membranes and to incite progress in this area. Finally, future perspectives and future trends are highlighted.

Silk biomaterials in different forms such as particles, coatings and their assemblies, represent unique type of materials in multiple scales and dimensions. Herein, we provide an overview of multi-scale silk fibroin materials including silk particles, silk coatings and silk assemblies, each of which represents a unique type of material with wide range of applications. They feature tunable structures and mechanical properties with excellent biocompatibility, which are essentially required for various biomedical and drug delivery applications. The review focuses on bringing a new perspective on the utilization of regenerated silk fibroins in modern biomedicine by beginning with the fabrication of silk in multiscale dimensions and their state-of-the-art applications in various biomedical and bioelectronic fields. It covers the fundamentals of processing silk fibroins in multi-dimensions (sizes and shapes) with a specific emphasis on its structural tunability at various length scales (nano–micro) by using the latest fabrication methods/mechanisms and advanced fabrication technologies, followed by their recent applications in diverse fields of biomedicine.

The development of novel hydrogels that possess adequate elasticity and toughness to withstand mechanically active environments, along with being biocompatible, remains a significant challenge in the design of materials for tissue engineering applications. In this study, a family of regenerated silk fibroin (RSF) based double network (DN) hydrogels were fabricated for the first time using a rapid one-pot method. The DN hydrogels combine the rigid covalently crosslinked RSF with the softer poly(N-vinylcaprolactam) (PVCL) through strong physical interactions. The formation of these DN hydrogels resulted in an improvement of the water uptake capacity, elasticity and toughness compared to the individual RSF hydrogel. The elasticity of the RSF/PVCL DN hydrogels was closer to that of native cartilage, which makes them promising materials for cartilage regeneration applications. An in vitro study on adhesion, proliferation and differentiation of a mouse pre-chondrocyte cell line (ATDC5) conducted using microscopic analysis, a cell proliferation assay and RT-PCR confirmed the cells cultured on the less stiff hydrogels demonstrated the most favourable chondrogenic response. Thus, this study demonstrates the potential of RSF-based hybrid hydrogels for cartilage tissue engineering applications.

Aqueous dispersions of poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM) nanoparticles (NPs) have been fabricated using a thiophene-based surfactant 2-(3-thienyl)ethyloxybutylsulfonate sodium salt (TEBS) for the first time via the mini-emulsion process. The use of TEBS resulted in a stable colloidal dispersion of P3HT:PCBM NPs, of which the effect of various fabrication parameters is investigated. The fabricated NPs were characterized by dynamic light scattering, scanning electron microscopy, UV-visible spectroscopy, contrast-variation small and ultra-small angle neutron scattering, and cyclic voltammetry. The internal structure and electrochemical performance of TEBS-stabilized P3HT:PCBM NPs were compared to those of sodium dodecyl sulfate-stabilized core-shell (PCBM-P3HT) NPs at the same surfactant concentration. Neutron scattering and cyclic voltammetry results reveal a homogeneous distribution of small de-mixed P3HT and PCBM domains in the internal structure of TEBS-stabilized P3HT:PCBM NPs, reminiscent of cast film. Moreover, electron microscopy images show evidence of diffused NP surface/interface upon drying (without annealing), which indicates that the thiophene-containing TEBS may improve compatibility and film-forming properties of fabricated P3HT:PCBM NPs, and consequently be more suited for conventional film-processing methods for organic solar cell applications.

Graphene inks have recently enabled the dramatic improvement of printed flexible electronics due to their low cost, ease of processability, higher conductivity and flexibility. In this review, we discuss the state-of-the-art of the fundamental formulation of graphene inks and the current printing techniques used for inks deposition, followed by recent practical applications for printed flexible electronics. The progression of science and technology for the dispersion of graphene using variety of solvents and the characteristics of the resulting conductive inks have been highlighted, with specific emphasis focused on the challenges to be resolved. The printing techniques discussed here include screen printing, gravure printing, inkjet printing and other emerging printing technologies. Each approach's pros and cons are discussed in correlation with the ink formulations and the operating principles. We also discuss the challenges and outlook of graphene ink for its future development in the world of printed flexible devices.

The development of protein-based hydrogels for tissue engineering applications is often limited by their mechanical properties. Herein, we present the facile fabrication of tough regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite hydrogels by a photochemical cross-linking method. The RSF/GO composite hydrogels demonstrated soft and adhesive properties during initial stages of photocrosslinking (

Multi-strain aerobic/anaerobic probiotic mixtures have gained considerable attention recently in terms of both food supplementation and therapeutic applications. The efficiency of such probiotic mixtures depends on the viable cell count in the gastrointestinal tract. Conventionally, probiotics are produced in individual bioreactors and supplemented with specific prebiotics and carrier agents to enhance performance. However, the production of multi-strain probiotic products is expensive. Hence, novel probiotic production strategies are crucial. This review describes conventional methods of probiotic production, followed by a comparative discussion of various alternative fermentation methods. We describe strategies to enhance the shelf-life of probiotic strains and the role of immobilization and carrier molecules in the production and harvesting of multi-strain aerobic/anaerobic probiotics. Finally, we discuss the role of novel materials and strategies that could potentially reduce the production cost associated with probiotics. Such novel strategies could potentially produce and encapsulate multiple probiotic strains in a single step.

A reformable polymer gel material has been developed based on the disulfide cross-linking of low-molecular-weight polyethylenimine (PEI) that can be synthesized through a facile thiolation method and reprocessed through an aqueous method without the use of solvents or additional chemicals. Despite being made with water-soluble PEI, the cross-linked gel shows good mechanical integrity and its properties can be controlled through the fabrication parameters, maintaining the hydrophilic nature of PEI while being sufficiently robust to form a free-standing film that does not dissolve in water. The properties of the gel have been characterized by Fourier transform infrared spectroscopy, thermogravimetry, and dynamic mechanical analyses, showing the effect of parameters such as the degree of thiolation and thermal curing. The reformability of the gel comes from the disulfide cross-links, which can be disrupted and reformed through a simple, aqueous processing method utilizing ultrasonication, creating an aqueous dispersion, which can be recast multiple times with minimal loss in physical properties. Refereed/Peer-reviewed

Current state of the art plastic solar cells utilise halogenated solvents which pose processing challenges due to their toxicity and thus environmental hazards. In this work, we investigate alternative materials which are processable using environmentally friendly solvents. Specifically, we investigate the use of water-soluble materials. Fullerenol, due to the presence of hydroxyl groups, can be functionalised by esterification using reagents such as acid chlorides. In this contribution, we studied the effect of thiophene substituents on the miscibility of fullerenol and P3HT. The chemical modification on fullerene did not alter the electrochemical property of fullerene which makes it suitable for acceptor applications for organic solar cells.

Herein we report the first example of a facile biomineralization process to produce ultra-small-sized highly fluorescent aqueous dispersions of platinum noble metal quantum clusters (Pt-NMQCs) using a multi-stimulus responsive, biomimetic intrinsically disordered protein (IDP), Rec1-resilin. We demonstrate that Rec1-resilin acts concurrently as the host, reducing agent, and stabilizer of the blue-green fluorescent Pt-NMQCs once they are being formed. The photophysical properties, quantum yield, and fluorescence lifetime measurements of the synthesized Pt-NMQCs were examined using UV-Vis and fluorescence spectroscopy. The oxidation state of the Pt-NMQCs was quantitatively analyzed using X-ray photoelectron spectroscopy. Both a small angle X-ray scattering technique and a modeling approach have been attempted to present a detailed understanding of the structure and conformational dynamics of Rec1-resilin as an IDP during the formation of the Pt-NMQCs. It has been demonstrated that the green fluorescent Pt-NMQCs exhibit a high quantum yield of ~7.0% and a lifetime of ~9.5 ns in aqueous media. The change in photoluminescence properties due to the inter-dot interactions between proximal dots and aggregation of the Pt-NMQCs by evaporation was also measured spectroscopically and discussed.

Micro-supercapacitors have recently emerged as promising microscale power sources for portable and wearable microelectronics. However, most reported planar micro-supercapacitors suffer from low energy density and the complexity of fabrication, which calls for their further development. In recent years, the fortification of graphene has enabled the dramatic improvement of planar micro-supercapacitors by taking full advantage of in-plane interdigital architecture and the unique features of graphene. The development of viable printing technologies has also provided better means for manufacturing, bringing micro-supercapacitors closer to practical applications. This review summarizes the latest advances in graphene-based planar micro-supercapacitors, with specific emphasis placed on formulation of graphene-based inks and their fabrication routes onto interdigital electrodes. Prospects and challenges in this field are also discussed towards the realization of graphene-based planar micro-supercapacitors in the world of microelectronics.

Organic thin film photovoltaics based on bulk-heterojunction donor–acceptor combinations have received significant interest due to their potential for low-cost, large-scale solution processing. However, current state-of-the-art cells utilise materials soluble mainly in halogenated solvents which pose processing challenges due to their toxicity and thus environmental hazards. In this contribution, we look at various nanomaterials, and alternative processing of these solar cells using environmentally friendly solvents, and review recently reported different strategies and approaches that are making inroads in this field. Specifically, we focus on the use of water-dispersible donors and acceptors, use of aqueous solvents for fabrication and discuss the merits of the two main approaches of water-processable solar cells; namely, through the use of water-soluble materials and the use of aqueous dispersion rather than a solution, as well as review some of the recent advances in alternative fabrication techniques. Refereed/Peer-reviewed

In this contribution, we report the facile preparation of cross-linked polymerizable ionic liquid (PIL)-based nanoparticles via thiol–ene photopolymerization in a miniemulsion. The synthesized PIL nanoparticles with a diameter of about 200 nm were fully characterized with regard to their chemical structures, morphologies, and properties using different techniques, such as Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. To gain an in-depth understanding of the physical and morphological structures of the PIL nanoparticles in an emulsion, small-angle neutron scattering and ultra-small-angle neutron scattering were used. Neutron scattering studies revealed valuable information regarding the formation of cylindrical ionic micelles in the spherical nanoparticles, which is a unique property of this system. Furthermore, the PIL nanoparticle emulsion was utilized as an inhibitor in a self-assembled nanophase particle (SNAP) coating. The corrosion protection ability of the resultant coating was examined using potentiodynamic polarization and electrochemical impedance spectroscopy. The results show that the PIL nanoparticle emulsion in the SNAP coating acts as an inhibitor of corrosion and is promising for fabricating advanced coatings with improved barrier function and corrosion protection.

Bioprinting is an advanced fabrication approach to engineer complex living structures as the conventional fabrication methods are incapable of integrating structural and biological complexities. It offers the versatility of printing different cell incorporated hydrogels (bioink) layer by layer; offering control over spatial resolution and cell distribution to mimic native tissue architectures. However, the bioprinting of tough hydrogels involve additional complexities, such as employing complex crosslinking or reinforcing mechanisms during printing and pre/post printing cellular activities. Solving this complexity requires attention from engineering, material science and cell biology perspectives. In this review, we discuss different types of bioprinting techniques with focus on current state-of-the-art in bioink formulations and pivotal characteristics of bioinks for tough hydrogel printing. We discuss the scope of transition from 3D to 4D bioprinting and some of the advanced characterization techniques for in-depth understanding of the 3D printing process from the microstructural perspective, along with few specific applications and conclude with the future perspectives in biofabrication of hydrogels for tissue engineering applications.

Aqueous dispersions of poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM) nanoparticles (NPs) have been fabricated using a thiophene-based surfactant 2-(3-thienyl)ethyloxybutylsulfonate sodium salt (TEBS) for the first time via the mini-emulsion process. The use of TEBS resulted in a stable colloidal dispersion of P3HT:PCBM NPs, of which the effect of various fabrication parameters is investigated. The fabricated NPs were characterized by dynamic light scattering, scanning electron microscopy, UV-visible spectroscopy, contrast-variation small and ultra-small angle neutron scattering, and cyclic voltammetry. The internal structure and electrochemical performance of TEBS-stabilized P3HT:PCBM NPs were compared to those of sodium dodecyl sulfate-stabilized core-shell (PCBM-P3HT) NPs at the same surfactant concentration. Neutron scattering and cyclic voltammetry results reveal a homogeneous distribution of small de-mixed P3HT and PCBM domains in the internal structure of TEBS-stabilized P3HT:PCBM NPs, reminiscent of cast film. Moreover, electron microscopy images show evidence of diffused NP surface/interface upon drying (without annealing), which indicates that the thiophene-containing TEBS may improve compatibility and film-forming properties of fabricated P3HT:PCBM NPs, and consequently be more suited for conventional film-processing methods for organic solar cell applications.

Regenerated Bombyx mori silk fibroin (RSF) is a widely recognized protein for biomedical applications; however, its hierarchical gel structure is poorly understood. In this paper, the hierarchical structure of photocrosslinked RSF and RSF-based hybrid hydrogel systems: (i) RSF/Rec1-resilin and (ii) RSF/poly(N-vinylcaprolactam (PVCL) is reported for the first time using small-angle scattering (SAS) techniques. The structure of RSF in dilute to concentrated solution to fabricated hydrogels were characterized using small angle X-ray scattering (SAXS), small angle neutron scattering (SANS) and ultra-small angle neutron scattering (USANS) techniques. The RSF hydrogel exhibited three distinctive structural characteristics: (i) a Porod region in the length scale of 2 to 3 nm due to hydrophobic domains (containing β-sheets) which exhibits sharp interfaces with the amorphous matrix of the hydrogel and the solvent, (ii) a Guinier region in the length scale of 4 to 20 nm due to hydrophilic domains (containing turns and random coil), and (iii) a Porod-like region in the length scale of few micrometers due to water pores/channels exhibiting fractal-like characteristics. Addition of Rec1-resilin or PVCL to RSF and subsequent crosslinking systematically increased the nanoscale size of hydrophobic and hydrophilic domains, whereas decreased the homogeneity of pore size distribution in the microscale. The presented results have implications on the fundamental understanding of the structure–property relationship of RSF-based hydrogels. Refereed/Peer-reviewed

The corrosion process is a surface reaction that can be controlled by the addition of corrosion inhibitors, which adsorb on the reacting metal surface. The inhibitors could be applied to a metal surface in many different ways. In this contribution, influence of polymerized ionic liquid (PIL) was examined on inhibition performance of a coating using carbon steel samples. The PIL was loaded in self-assembled nanophase particle (SNAP) coating and the inhibition behaviour was investigated using potentiodynamic polarization, electrochemical impedance spectroscopy and scanning kelvin probe techniques. The inhibition efficiency of the coating increases with the addition of PIL as observed from potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. In addition, scanning kelvin probe (SKP) measurement provides further understanding on the strong interfacial properties of the modified coating compared to that of the SNAP. Refereed/Peer-reviewed

In recent years, protein-based elastomeric hydrogels have gained increased research interest in biomedical applications fortheirremarkableself-assemblybehaviour,tunable3Dporousstructure,highresilience(elasticity),fatiguelifetime(durability),wateruptake,excellentbiocompatibilityandbiologicalactivity.Theproteinsandpolypeptidescanbederivednaturally(animalor insect sources) or by recombinant (bacterial expression) routes and can be crosslinked via physical or chemical approachesto obtain elastomeric hydrogels. Here we review and present the recent accomplishments in the synthesis, fabrication andbiomedical applications of protein-based elastomeric hydrogels such as elastin, resilin, flagelliform spider silk and theirderivatives. c 2013SocietyofChemicalIndustryKeywords: biomimetic proteins; elastomers; hydrogels; tissue engineering; regenerative medicine INTRODUCTION Hydrogels are a class of three-dimensional crosslinked synthetic orbiopolymer networks that are insoluble and capture large amountof water.

Electronic supplementary information (ESI) available: This includes the NMR data confirming the identity of the silk powder, the full crosslinking reaction schematic, fluorescence and UV-vis spectra of the gels, and the determination of the minimum Ru(II)(bpy)3 2+ concentration required for crosslinking. See DOI: 10.1039/c4tb00698d A facile and rapid ruthenium catalysed photo-crosslinking method was employed to prepare Bombyx mori silk fibroin hydrogels for the first time that may be used for biomedical applications. The gels have been characterised by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), photoacoustic Fourier transform infrared spectroscopy (PA-FTIR), and X-ray diffraction (XRD). We have reported the tuning of the properties of the chemically crosslinked gels through hydration level. DSC and DMA measurements have shown that the molecular chain dynamics and mechanical properties are dependent on the moisture/water content. The structural changes upon gelation were examined through the use of DSC, PA-FTIR and XRD, which confirmed that the gels were less crystalline than the original silk powder. Finally, the biocompatibility and hence, the potential tissue engineering application of the silk fibroin hydrogel was also assessed by culturing chondrocyte progenitor cells for up to one week on the engineered fibroin surfaces. Refereed/Peer-reviewed

Nature, through evolution over millions of years, has perfected materials with amazing characteristics and awe-inspiring functionalities that exceed the performance of man-made synthetic materials. One such remarkable material is native resilin - an extracellular skeletal protein that plays a major role in the jumping, flying, and sound production mechanisms in many insects. It is one of the most resilient (energy efficient) elastomeric biomaterials known with a resilience of 97% and a fatigue life in excess of 300 million cycles. Recently, resilin-like polypeptides (RLPs) with exquisite control over the amino acid sequence (comprising repeat resilin motifs) and tuneable biological properties and/or functions have been generated by genetic engineering and cloning techniques. RLPs have been the subject of intensive investigation over a decade and are now recognized to be multi-functional and multi-stimuli responsive; including temperature (exhibiting both an upper and a lower critical solution temperature), pH, moisture, ion and photoresponsive with tuneable photo-physical properties. Such unusual multi-stimuli responsiveness has scarcely been offered and reported for either synthetic or natural biopolymers. Furthermore, the directed molecular self-assembly property of RLPs also exhibits promise as efficient templates for the synthesis and stabilization of metal nanoparticles. These developments and observations reveal the opportunities and new challenges for RLPs as novel materials for nanotechnology, nanobiotechnology and therapeutic applications. In this review, we discuss and highlight the design and synthesis of different RLPs, their unique molecular architecture, advanced responsive behaviour, and functionality of hydrogels, solid-liquid interfaces, nanoparticles and nanobioconjugates derived from RLPs. Refereed/Peer-reviewed