Search

Wire cut electrical discharge machining (WEDM) is a hybrid manufacturing technology which enables machining of all engineering materials. This research article deals with investigation on Optimization of the Process Parameters of the wire cut EDM of Bronze material of dimension (80*80*40) in mm. Material removal rate, Surface roughness and Kerf width were studied against the process parameters such as Pulse on time(TON), Pulse off time (TOFF) and Current(IP). The machining parameters for wire EDM were optimized for achieving the combined objectives. As there are three input parameters 27 experiments is carried out and full factorial is used. Optimized parameters were found using (ANOVA) and the error percentage can be validated and parameter contribution for the Material removal rate (MRR) and Surface roughness were found.

Fiction Stir welding (FSW) a unique type of metal joining process in solid state, where the heat generation takes place due to the friction action between the rotating tool and the work piece. It is generally used to join all series of Aluminum alloys with good strength and other metallic alloys finds difficult to weld through regular fusion welding techniques. The metal joining takes place in the solid state as the metal to be welded reaches about 80% to 90% of its melting temperature. The joining of metals in friction stir welding does not require any filler metals all classes of Aluminium alloys can be joined and in some desirable cases dissimilar metal compositions and Aluminiun metals composites can be joined satisfactorily. Joining of dissimilar metals has become a trend in the industries like aerospace, automotive chemical etc. as the helps in reducing the cost incurred by eliminating the costly materials. In the present study an experimental investigations are made to study the heat transfer behavior by determining the temperature distribution in AA5052-AA6061 plates during the Friction Stir welding. A three dimensional transient analysis is made by using ANSYS finite element analysis software. Thermocouples are placed at the suitable locations and the same point the temperature readings were taken from the simulation results. The experimental data is compared with the numerically simulated results. The numerical simulations results obtained are in better agreement with the experimental data obtained.