Search

Objective To assess the pain profile of patients in the levelling/alignment phase of orthodontic treatment, as reported from randomized clinical trials. Materials and methods Five databases were searched in September 2022 for randomized clinical trials assessing pain during levelling/alignment with a visual analogue scale (VAS). After duplicate study selection, data extraction, and risk-of-bias assessment, random effects meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by subgroup/meta-regression, and certainty analyses. Results A total of 37 randomized trials including 2277 patients (40.3% male; mean age 17.5 years) were identified. Data indicated quick pain initiation after insertion of orthodontic appliances (n = 6; average = 12.4 mm VAS), a quick increase to a peak at day 1 (n = 29; average = 42.4 mm), and gradually daily decrease the first week until its end (n = 23; average = 9.0 mm). Every second patient reported analgesic use at least once this week (n = 8; 54.5%), with peak analgesic use at 6 h post-insertion (n = 2; 62.3%). Patients reported reduced pain in the evening compared to morning (n = 3; MD = − 3.0 mm; 95%CI = − 5.3, − 0.6; P = 0.01) and increased pain during chewing (n = 2; MD = 19.2 mm; 95% CI = 7.9, 30.4; P n = 2; MD = 12.4 mm; 95% CI = 1.4, 23.4; P = 0.3), while non-consistent effects were seen for patient age, sex, irregularity, or analgesic use. Subgroup analyses indicated increased pain among extraction cases and during treatment of the lower (rather than the upper) arch, while certainty around estimates was moderate to high. Conclusions Evidence indicated a specific pain profile during orthodontic levelling/alignment, without signs of consistent patient-related influencing factors.

Summary Objectives Interproximal enamel reduction (IPR) is routinely used in orthodontics to generate small to moderate amounts of space within the dental arch. Aim of this ex vivo study was to evaluate the effect of two different IPR systems on the enamel surface’s waviness, roughness, and elemental composition after 6 months of intraoral exposure. Materials and methods Fifteen orthodontic extraction patients were included in the present study. The 39 healthy premolars, which were scheduled to be extracted, were subjected to IPR at least 6 months before their extraction. IPR was performed on their mesial side with two different methods: (1) instrumented method with the Ortho-Strips system (on handpiece) and (2) manually with the Intensiv ProxoStrip (strips)—each with four different grits for contouring, finishing, and polishing. The distal side of each premolar served as its own internal control. Treated and untreated tooth surfaces were evaluated by optical profilometry, Raman, and scanning electron microscope/X-ray energy-dispersive (EDX) analyses. Data were analysed with descriptive statistics and generalized linear models at alpha = 5%. Results Both IPR methods significantly reduced the waviness of the enamel surface (P Conclusions Both stripping systems led to a flatter but rougher enamel surface. Further polishing is needed to restore the initial enamel smoothness. The elemental composition of the stripped enamel returns to the baseline level after 6 months of intraoral exposure.

In systematically healthy patients with an implant-supported fixed restoration (P), what is the influence of thin (E) as compared to thick (C) peri-implant soft tissues on aesthetic outcomes (O)?Following an a priori protocol, a literature search of six databases was conducted up to August 2020 to identify prospective/retrospective clinical studies on healthy patients with an implant-supported fixed reconstruction. Measurement of the buccal soft tissue thickness and an aesthetic outcome was a prerequisite, and sites presenting with a buccal soft tissue thickness of2 mm or shimmering of a periodontal probe were categorized as a thin phenotype. After study selection, data extraction, and risk of bias assessment, random-effects meta-analysis of Mean Differences (MD) or Odds Ratios (OR) with their corresponding 95% Confidence Intervals (CI) were conducted, followed by sensitivity analyses and assessment of the quality of evidence.Thirty-four unique studies reporting on 1508 patients with 1606 sites were included (9 randomized controlled trials, one controlled trial, 10 prospective cohort studies, 8 cross-sectional studies, and 6 retrospective cohort studies). The mean difference of the pink aesthetic score (PES) after the follow-up was not significantly different between thin (2.0 mm) or thick soft tissues (≥2.0 mm) or phenotypes (12 studies; MD = 0.15; [95% CI = -0.24, 0.53]; p = .46). PES changes during the follow-up, however, were significantly in favour of thick soft tissues (≥2.0 mm) or phenotypes (p = .05). An increased mean mucosal thickness was associated with an increased papilla index (5 studies; MD = 0.5; [95% CI = 0.1, 0.3]; p = .002) and an increase in papilla presence (5 studies; OR = 1.6; [95% CI = 1.0, 2.3]; p = .03). Thin soft tissues were associated with more recession, -0.62 mm (4 studies; [95% CI = -1.06, -0.18]; p = .006). Patient-reported outcome measures (patient satisfaction) were in favour of thick soft tissues -2.33 (6 studies; [95% CI = -4.70, 0.04]; p = .05). However, the quality of evidence was very low in all instances due to the inclusion of non-randomized studies, high risk of bias and residual confounding.Within the limitations of the present study (weak study designs and various soft tissue measurements or time-points), it can be concluded that increased soft tissue thickness at implant sites was associated with more favourable aesthetic outcomes.

Purpose Orthodontic treatment involving premolar extractions might improve the angulation of lower third molars, which are the teeth most often impacted. This study analyzes the impact of first/second lower premolar extraction during orthodontic therapy on the angulation of mandibular third molars. Methods A total of 120 patients treated non-extraction (n = 40), with extraction of first (n = 40), or second lower premolars (n = 40) were included. The mesiodistal angulation of lower third molars relative to the adjacent tooth and their developmental stage were evaluated from posttreatment orthopantomograms. Between-group differences were statistically evaluated at a significance level of 0.05. Results The orthopantomograms of 120 patients (51% female) with a median age of 15.2 years at the time of debonding were evaluated after a mean treatment duration time of 2.9 years. No difference (P > 0.05) was seen between the average angulation of the lower third molars of the right (mean = 24.4°, standard deviation [SD] 13.6°) and the left side (mean = 23.6°, SD 14.1°). No differences in the angulation of the lower third molar were found between the non-extraction and extraction groups for the right (P = 0.44) or the left side (P = 0.22). Likewise, no differences were found when comparing the first and second premolars for the right (P = 0.26) or the left side (P = 0.10). Premolar extraction was associated with an advanced root development stage of the right third molar (odds ratio 7.1; 95% confidence interval 1.1–48.1; P = 0.04), with no differences between extraction of the first or second premolar (P = 0.10). Conclusion Orthodontic treatment involving premolars extractions might be associated with a small acceleration in root development, but not with the angulation, of lower third molars.

A key goal of orthodontic treatment with fixed appliances is alignment of the dentition, and this remains a commonly selected outcome in clinical studies investigating orthodontic tooth movement. This systematic review has evaluated treatment duration to achieve alignment of the mandibular dentition using fixed appliances.Systematic literature searches without restrictions were undertaken in 9 databases for randomized clinical trials (RCTs) assessing duration and rate of tooth alignment using fixed appliances with or without treatment adjuncts published up to January 2021. After duplicate study selection, data extraction, and risk of bias assessment according to Cochrane, random-effects meta-analyses of aggregate data, and individual patient data were conducted.Thirty-five trials were included with 2258 participants (39% male; mean age 17.8 years), giving a pooled duration to achieve whole-arch alignment of the mandibular dentition of 263.0 days (4 trials; 95% confidence interval [CI], 186.7-339.4 days) and incisor alignment in the mandibular arch of 100.7 days (9 trials; 95% CI, 84.1-117.4 days). Surgical-assisted orthodontics was associated with reduced duration of incisor alignment: mean difference of 44.3 days less (4 trials; 95% CI, 20.0-68.9 days; P 0.001; high quality of evidence), whereas subgroup and meta-regression analyses indicated significant effects of baseline crowding and premolar extractions. Individual patient data analysis from 3 RCTs indicated that for each additional participant age year, whole-arch alignment of the mandibular dentition took 13.7 days longer (3 trials; 95% CI, 7.7-17.7 days; P 0.001) and for each additional mm of irregularity, 17.5 days more were needed (2 trials; 95% CI, 9.8-25.2 days; P 0.001).Patient and treatment-related characteristics can significantly affect the duration of tooth alignment and should be taken into account both clinically and when designing trial outcomes. Future research studies investigating rates of orthodontic tooth alignment would benefit from adequate sample sizes and a more consistent methodology in outcome assessment. Data in this systematic review provides a basis for appropriate trial design for future RCTs investigating the rate of orthodontic tooth alignment with fixed appliances.

Purpose To identify clinically relevant factors for changes in axial angulation of incisors during routine fixed appliance orthodontic treatment. Methods A total of 106 patients (grades 1–2 of IOTN, 64 females, 42 males; mean age: 15.5 years) from a private practice and treated with metal or ceramic brackets were included in this retrospective cohort study. The axial angulation of the upper and lower incisors was measured on lateral cephalograms before insertion of the first rectangular 0.016 × 0.022-in NiTi archwire (T0) and at the end of treatment about 8 weeks after insertion of the working 0.019 × 0.025-in stainless steel archwire (T1). Treatment-related changes according to bracket type, initial situation, premolar extraction, angle class, and skeletal vertical configuration were analyzed. Results Although statistically significant treatment-related changes were seen for both the upper incisors (+ 1.3°) and the lower incisors (− 5.2°), only in ten patients (9.4%) was the prescribed torque value of 17° for the upper incisors and in no patient for the lower incisors achieved. A negative association between the induced change of axial angulation of incisors and the initial values was detected for the upper incisors as well as for the lower incisors. A comparison of the angle classes revealed significant differences in incisor changes. At the end of therapy, only a slight change for the upper central incisors in patients in angle class I cases and a significantly greater change in patients with angle class II/2 was observed. Cases with premolar extraction ended with lower axial angulation of the incisor than cases without extraction. The individual analysis of possible influencing factors also revealed an association with the vertical skeletal configuration. Conclusions For the first time, the presented data show clinically relevant influencing factors for incisor axial angulation changes of the upper and lower incisors in relation to the torque value of the applied brackets in the course of routine clinical practice. For the orthodontist, it remains mandatory to decide whether a customized system must be individualized in order to achieve individual therapy goals.

Space closure is a challenging and time-consuming phase of orthodontic treatment with fixed appliances. This systematic review evaluated canine retraction duration using fixed appliances after maxillary first premolar extraction.Unrestricted systematic literature searches were conducted in 8 databases for randomized clinical trials, assessing the duration and rate of maxillary canine retraction using fixed appliances with or without treatment adjuncts published up to July 2021. Study selection, data extraction, and risk of bias evaluation were conducted independently and in duplicate. Random-effects meta-analyses of average rates or mean differences (MD) and 95% confidence intervals (CI) were conducted at α = 5%, followed by sensitivity and Grading of Recommendations Assessment, Development, and Evaluation analysis.Fifty randomized clinical trials (6 parallel and 44 split-mouth designs) covering 811 participants (mean age 19.9 years; 34% male) were included. The estimated average pooled duration to achieve complete canine retraction was 4.98 months (2 trials; 95% CI, -2.9 to 12.88 months). Pooled average canine retraction was 0.97 mm at months 0-1 (23 trials; 95% CI, 0.79-1.16), 1.83 mm at months 0-2 (20 trials; 95% CI, 1.52-2.14), 2.44 mm at months 0-3 (23 trials; 95% CI, 2.10-2.79), 3.49 mm at months 0-4 (6 trials; 95% CI, 1.81-5.17) and 4.25 mm at months 0-5 (2 trials; 95% CI, 0.36-8.14). Surgically-assisted orthodontics was associated with greater canine retraction at all time points: months 0-1 (10 trials; MD, 0.52 mm; P = 0.004), months 0-2 (8 trials; MD, 0.53 mm; P = 0.04), months 0-3 (8 trials; MD, 0.67 mm; P = 0.01), and months 0-4 (3 trials; MD, 1.13 mm; P = 0.01), whereas subgroup analyses indicated significant effects of anchorage reinforcement method and bracket slot size on canine retraction.The average time to achieve complete retraction of the maxillary canine using fixed appliances was around 5.0 months. Most studies used split-mouth randomization to investigate canine retraction for around 1-3 months, with substantial heterogeneity across studies. At 3 months of treatment, high-quality evidence supported greater canine retraction with surgically-assisted orthodontics.

To assess mandibular incisor inclination after leveling the curve of Spee (CoS) in patients treated with fixed appliances.This was a retrospective study, which included 80 consecutive patients with a mild CoS treated without extraction but with various biomechanical approaches. The depth of CoS was digitally measured on scanned plaster casts and mandibular incisor inclination was assessed with lateral cephalograms pre- and posttreatment. Patients were treated with 0.018"-slot edgewise fixed appliances and cinched back wires. Data were analyzed using linear regression modeling at 5%.A total of 80 patients (40% female; mean age 13.8 years) were included with mean ANB = 4.4 ± 1.9°, mean SN/ML = 31.7 ± 4.7°, mean L1/ML = 95.0 ± 7.7°, and a mean depth of CoS = 1.1 ± 0.4 mm. The depth of CoS was leveled by -0.85 ± 0.39 mm to a post-treatment median of 0.18 mm (interquartile range = 0.09 to 0.35 mm). A small mandibular incisor proclination was observed through treatment (2.49 ± 9.1°), but this was not associated with the reduction in the depth of CoS (p0.05) and no statistically significant modifying effect from the different treatment mechanics was observed.Under the limitations of this study, leveling a mild CoS was not associated with mandibular incisor proclination during fixed-appliance treatment.

Objectives Three-dimensional (3D) printing technology is an emerging manufacturing process for many orthodontic appliances, and the aim of this study was to evaluate the mechanical properties of resin-based materials as alternatives for the in-house preparation of orthodontic brackets. Material and Methods Two types of 3D printed resins used for temporary (T) and permanent (P) crown fabrication were included in this study. Ten blocks from each resin were manufactured by a 3D printer and, after embedding them in acrylic resin, the samples were subjected to metallographic grinding and polishing, followed by instrumented indentation testing (IIT). Martens hardness (HM), indentation modulus (EIT), and elastic index (ηIT) were determined with a Vickers indenter recording force-indentation depth curves from each specimen. After calculating descriptive statistics, differences between material types were investigated with Wilcoxon rank sum test accounting for clustering of measurements within specimens at alpha = 5%. Results No statistically significant differences in the mechanical properties of the two tested materials were seen: HM: median 279 N/mm2 (interquartile range [IQR] 275–287 N/mm2) for T and median 279 N/mm2 (IQR 270–285 N/mm2) for P (P value = 0.63); EIT: median 5548 MPa (IQR 5425–5834 MPa) for T and median 5644 (IQR 5420–5850 MPa) for P (P value = 0.84); ηIT: median 47.1% (46.0–47.7%) for T and median 46.0% (IQR 45.4–47.8%) for P (P value = 0.24). Conclusions Under the limitations of this study, it may be concluded that the mechanical properties of the two 3D printed resins tested are equal, and thus, no differences in their clinical performance are expected.

Background Knowledge obtained at the undergraduate level regarding molar incisor hypomineralisation (MIH) has an impact on future practice of dentists and paediatric dentists. This cross-sectional study aimed to assess final-year dental students’ knowledge, attitudes and beliefs towards MIH in all Swiss universities. Methods A previously utilised survey (in both English and German) was distributed among final-year dental students in all Swiss dental schools (Basel, Bern, Geneva and Zurich). It probed students’ knowledge, attitudes and beliefs regarding the diagnosis, prevalence, aetiology, and management of MIH, and was structured in two parts: knowledge/perception and clinical application. The students’ responses were analysed statistically with descriptive statistics. Results 113 out of 133 final-year Swiss dental students took part in the study (85%). Nearly all students were familiar with MIH (99%), but only 12% of them felt confident when diagnosing MIH clinically. Direct composite fillings (66%), indirect restorations (28%) and preformed stainless-steel crowns (26%) were chosen as most suitable treatment options for MIH-affected teeth. Conclusion Final-year Swiss dental students are well informed about MIH. However, they report low level of confidence when clinically confronted with MIH-affected teeth regarding its diagnosis and treatment. Swiss Universities curricula should be revisited accordingly.

Background Even though treatment of Class II malocclusion with premolar extractions and incisor retraction might affect incisor inclination and soft tissue profile, the effects of bracket prescription on this have not been thoroughly assessed. Methods Fifty patients (mean age: 13.6 years; 34% male) receiving extraction-based treatment with either standard Edgewise or pre-adjusted appliances were included. Between-group differences in the incisor inclination assessed with lateral cephalograms were analyzed statistically with linear/logistic regression at 5%. Results Treatment-induced changes included retroclination of the upper/lower incisors (−3.0° and −2.0°, respectively), retraction of the upper/lower incisors (−3.4 mm and −1.5 mm, respectively), retraction of the upper/lower lip (−2.1 mm and −2.0 mm, respectively), and enlargement of the nasolabial angle (+1.6°). Analysis of the data adjusting for confounders indicated that the pre-adjusted group, after treatment, had larger inclination of the upper or lower incisors (+3.2° and +4.5°, respectively), more prominent upper incisors relative to the facial plane (+1.3 mm), and smaller interincisal angle (−7.3 or −7.7°). Post-treatment upper incisor inclination fell within the cephalometric norm significantly more in the pre-adjusted than in the standard Edgewise group (odds ratio 4.3; 95% confidence interval 1.1–16.6). No differences were found in lower incisor prominence, upper/lower lip prominence, or nasolabial angle. Conclusions Pre-adjusted appliances were associated with increased inclination of the upper and lower incisors, with more prominent upper incisors, and with more acute interincisal angle after retraction compared with standard Edgewise appliances. However, such differences did not translate in greater retraction of the upper/lower lips and greater nasolabial angle.

AIM To assess the beneficial and adverse effects on the dental and periodontal issues of periodontal-orthodontic treatment of teeth with pathological tooth flaring, drifting, and elongation in patients with severe periodontitis. MATERIALS AND METHODS Nine databases were searched in April 2020 for randomized/non-randomized clinical studies. After duplicate study selection, data extraction, and risk-of-bias assessment, random-effect meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by subgroup/meta-regression analyses. RESULTS A total of 30 randomized and non-randomized clinical studies including 914 patients (29.7% male; mean age 43.4 years) were identified. Orthodontic treatment of pathologically migrated teeth was associated with clinical attachment gain (-0.24 mm; seven studies), pocket probing depth reduction (-0.23 mm; seven studies), marginal bone gain (-0.36 mm; seven studies), and papilla height gain (-1.42 mm; two studies) without considerable adverse effects, while patient sex, gingival phenotype, baseline disease severity, interval between periodontal and orthodontic treatment, and orthodontic treatment duration affected the results. Greater marginal bone level gains were seen by additional circumferential fiberotomy (two studies; MD = -0.98 mm; 95% CI = -1.87 to -0.10 mm; p = .03), but the quality of evidence was low. CONCLUSIONS Limited evidence of poor quality indicates that orthodontic treatment might be associated with small improvements of periodontal parameters, which do not seem to affect prognosis, but more research is needed.

Summary Background Orthodontic patients wearing fixed appliances are susceptible to traumatic dental injuries during contact-sport. This laboratory study investigated the protective qualities of orthodontic mouthguards using impact-testing to a typodont fitted with a fixed appliance through peak load transfer and retention of the mouthguard. Methods Seven orthodontic mouthguards [three custom-made (Medium-CM, Heavy-CM, Heavy-pro-CM); three commercially-available mouth-formed (Shock-Doctor® Ultra Braces, Opro® Ortho-Gold Braces, Opro® Ortho-Bronze Braces) and a Shock-Doctor® Instant-Fit] were fitted to a maxillary arch typodont bonded with a fixed appliance and impact-tested using 0.5 or 1 Joule (J) energy via hockey-ball, cricket-ball or steel-ball projectile. A load-cell recorded peak load transfer through mouthguard to typodont with retention scored in a binary manner dependent upon any displacement following impact. Differences across mouthguards were calculated with ANOVA or Kruskal–Wallis test for normal and non-normal data, respectively. Post hoc comparisons across mouthguards were conducted via Dunnett's test with Sidak correction. Results Only the three custom-made and Opro® Ortho-Gold Braces were not displaced by impact-testing. For these, Opro® Ortho-Gold Braces transferred the smallest load for 3/6 impact-tests, followed by Medium-CM. Heavy-pro-CM performed poorly, ranking penultimate or worst for all impact-tests. Significant differences were found between mouthguards for cricket-ball and steel-ball set-ups. The Opro® Ortho-Gold Braces performed better than the Heavy and Heavy-pro-CM for 0.5 J cricket-ball impact-test (P < 0.05), whilst Medium-CM performed better than Heavy-pro-CM. For 1 J cricket-ball, there were significant differences between Medium-CM and Heavy-pro-CM (P < 0.05). For 0.5 J steel-ball, the Medium-CM performed significantly better than both Heavy-pro-CM and Opro® Ortho-Gold Braces (P < 0.05), whilst Heavy-CM performed better than the Heavy-pro-CM (P < 0.05). For the 1 J steel-ball, Medium and Heavy-CM performed better than Opro® Ortho-Gold Braces (P < 0.05). Conclusions Opro® Ortho-Gold and Medium-CM mouthguards offer the best protection for low-impact sports, whilst Medium or Heavy-CM mouthguards are recommended for high-impact sport.

Adequate control of the vertical dimension is of great importance in orthodontic treatment. Although existing evidence is very limited, extraction of four premolars is thought to contribute towards improved control of anterior facial height compared with non-extraction treatment protocols. Thus, the aim of this retrospective cohort study was to compare the effect of fixed-appliance treatment with extraction of four premolars to non-extraction treatment on the skeletal vertical dimension.A consecutive sample of 76 children with skeletal hyperdivergence (49% male; mean age 11.9 years) was divided into two groups for treatment with either non-extraction (n = 31) or extraction of four premolars (n = 45). Baseline characteristics were comparable: overjet 5.1 ± 2.5 mm, overbite 2.4 ± 1.9 mm, ANB angle 4.6 ± 2.3°, and SN-ML angle 40.2 ± 3.5°. Patients were treated with standard edgewise fixed appliances with closing loops/sliding mechanics. Vertical skeletal and dental outcomes were measured on lateral cephalograms before and after treatment. Data were analyzed with linear regression at 5%.Compared to non-extraction treatment, treatment with premolar extractions had no significant effect on the SN-ML angle (difference (Δ) = 0.07°; 95% confidence interval -0.90 to 1.01°; P = 0.88). Statistically significant changes between the extraction and non-extraction groups were only found for the parameters SNA (Δ -1.47°; P = 0.003), ANB (Δ -1.17°; P = 0.004), SN-OP (Δ -1.48°; P = 0.04), and L1-ML (Δ -6.39°; P 0.001).Orthodontic treatment of children with skeletal hyperdivergence using systematic extraction of four premolars had minimal effects on the vertical facial dimension compared to non-extraction treatment.ZIELSETZUNG: Eine adäquate Kontrolle der vertikalen Dimension ist in der kieferorthopädischen Behandlung von großer Bedeutung. Auch wenn die Evidenzlage sehr begrenzt ist, geht man davon aus, dass die Extraktion von 4 Prämolaren im Vergleich zu nichtextraktiven Behandlungsprotokollen zu einer besseren Kontrolle der anterioren Gesichtshöhe beiträgt. Ziel dieser retrospektiven Kohortenstudie war es daher, die Auswirkung einer festsitzenden Behandlung mit Extraktion von 4 Prämolaren mit einer nichtextraktiven Behandlung auf die vertikale Dimension des Skeletts zu vergleichen.Eine konsekutive Stichprobe von 76 Kindern mit skelettaler Hyperdivergenz (49% männlich; Durchschnittsalter 11,9 Jahre) wurde in 2 Gruppen aufgeteilt, die entweder mit einer Nichtextraktionsbehandlung (n = 31) oder einer Extraktion von 4 Prämolaren (n = 45) behandelt wurden. Die Ausgangsdaten waren vergleichbar: Sagittale Frontzahnstufe 5,1 ± 2,5 mm, vertikale Frontzahnstufe 2,4 ± 1,9 mm, ANB-Winkel 4,6 ± 2,3° und SN-ML-Winkel 40,2 ± 3,5°. Die Patienten wurden mit festsitzenden Standardapparaturen mit „closing loops“ /Gleitmechanik behandelt. Die vertikalen skelettalen und die dentalen Resultate wurden auf lateralen Kephalogrammen vor und nach der Behandlung ermittelt. Die Ergebnisse wurden mit einer linearen Regression von 5% ausgewertet.Im Vergleich zu einer Behandlung ohne Extraktion hatte die Behandlung mit Prämolarenextraktionen keine signifikante Auswirkung auf den SN-ML-Winkel (Differenz [Δ] = 0,07°; 95%-Konfidenzintervall [KI] -0,90 bis 1,01°; p 0,88). Statistisch signifikante Veränderungen zwischen der Extraktions- und der Nichtextraktionsgruppe wurden nur für die Parameter SNA (Δ −1,47°; p = 0,003), ANB (Δ −1,17°; p = 0,004), SN-OP (Δ −1,48°; p = 0,04) und L1-ML (Δ −6,39°; p 0,001) festgestellt.Die kieferorthopädische Behandlung von Kindern mit skelettaler Hyperdivergenz durch systematische Extraktion von 4 Prämolaren hatte minimale Auswirkungen auf die vertikale Gesichtsdimension im Vergleich zu einer Behandlung ohne Extraktion.

Summary Objective To investigate alterations in the mechanical properties of in-house three-dimensional (3D) printed orthodontic aligners after intraoral ageing. Materials and methods Sixteen 3D-printed aligners (TC-85DAC resin, Graphy, Seoul, Korea) were used for the purpose of the study, which were divided into 10 control (not used) aligners and 6 materials retrieved from 4 patients after 1-week service (retrieved group). Samples from the control group were analysed by attenuated total reflectance-Fourier-transform infrared (ATR-FTIR) spectroscopy. Samples from control/retrieved groups were embedded resin and subjected to instrumented indentation testing (IIT) to record force–indentation depth curves, calculating the following (as per ISO 14577-1, 2002 standard): Martens hardness (HM), indentation modulus (EIT), and elastic index (ηIT), and the indentation relaxation index (RIT). Differences between control and retrieved 3D-printed aligners were checked with Mann–Whitney/t-tests at an alpha = 5%. Results ATR-FTIR analysis showed that aligners were made of a vinyl ester–urethane material. The results of the IIT testing were: HM (control: median 91.5 N/mm2, interquartile range [IQR] 88.0–93.0/as-retrieved: median 90.5 N/mm2, IQR 89.0–93.0); EIT (control, mean 2616.3 MPa, standard deviation [SD] 107.0 MPa/retrieved, mean 2673.2 MPa, SD 149.4 MPa); ηIT (control: median 28.6%, IQR 28.2–30.9%/as-retrieved: median 29.0%, IQR 28.7–29.2%); and RIT (control: median 45.5%, IQR 43.0–47.0%/as-retrieved: median 45.1%, IQR 45.0–45.3%). No differences between as-retrieved and control aligners were found for any of the mechanical properties tested (P > 0.05 in all instances). Conclusion The mechanical properties of the in-house 3D-printed aligners tested were not affected after 1 week in service period.

Summary Objective To assess three rapid maxillary expansion (RME) appliances in nasal ventilation. Trial design Three-arm parallel randomized clinical trial. Methods Sixty-six growing subjects (10–16 years old) needing RME as part of their orthodontic treatment were randomly allocated (1:1:1 ratio) to three groups of 22 patients receiving Hyrax (H), Hybrid-Hyrax (HH), or Keles keyless expander (K). The primary outcome of nasal ventilation (pressure and velocity) and secondary outcomes (skeletal, dental, soft tissue, and nasal obstruction changes) were blindly assessed on the initial (T0) and final (T1, 6 months at appliance removal) cone-beam computed tomography (CBCT) data by applying computational fluid dynamics (CFD) method. Differences across groups were assessed with crude and adjusted for baseline values and confounders (gender, age, skeletal maturation, expansion amount, mucosal/adenoid hypertrophy, nasal septum deviation) regression models with alpha = 5%. Results Fifty-four patients were analysed (19H, 21HH, 14K). RME reduced both nasal pressure (H: −45.8%, HH: −75.5%, K: −63.2%) and velocity (H: −30%, HH: −58.5%, K: −35%) accompanied with nasal obstruction resolution (H: 26%, HH: 62%, K: 50%). Regressions accounting for baseline severity indicated HH expander performing better in terms of post-expansion maximum velocity (P = 0.03) and nasal obstruction resolution (P = 0.04), which was robust to confounders. Mucosal/adenoid hypertrophy and nasal septum deviation changes were variable, minimal, and similar across groups. The HH resulted in significantly greater increase in the nasal cross-sectional area (62.3%), anterior (14.6%), and posterior (10.5%) nasal widths. Nasal obstruction resolution was more probable among younger (P = 0.04), skeletally immature (P = 0.03), and male patients (P = 0.02) without pre-treatment mucosal hypertrophy (P = 0.04), while HH was associated with marginal greater probability for obstruction resolution. Conclusions RME resulted in improvement of nasal skeletal parameters and simulated ventilation with the former being in favour of the HH and the latter not showing significant differences among the three appliances. Limitation Attrition in the K group due to blocked activation rods possibly leading to limited sample to identify any existing group differences. Harms Replacement of blocked Keles expanders for finalizing treatment. Protocol The protocol was not published before the trial commencement. Registration Australian and New Zealand Clinical Trial Registry; ACTRN12617001136392.

Purpose Orthodontic fixed appliances have been proven to be effective in treating a wide variety of malocclusions, and different types of appliances have emerged during recent decades. However, the comparative effects of different appliances have not been adequately assessed. Thus, the aim was to assess the occlusal outcome of orthodontic treatment with preadjusted straight-wire (SWIRE) and standard edgewise (SEDGE) appliances. Methods In all, 56 patients (mean age: 13.5 years; 45% male) receiving extraction-based treatment with either SWIRE or SEDGE appliances were included. Between-group differences in the occlusal outcome assessed with the American Board of Orthodontists Objective Grading System (ABO-OGS) and treatment duration were analyzed statistically at the 5% level. Results The average ABO-OGS score was 31.3 ± 7.2 points and 34.0 ± 10.4 points in the SWIRE and SEDGE groups with no statistically significant difference between groups (P = 0.26). Treatment duration was significantly shorter in the SWIRE group compared to the SEDGE group, with an average difference of −6.8 months (95% confidence interval [95% CI] = −9.6 to −4.0 months; P P Conclusion Similar treatment outcomes were observed after premolar extraction treatment with SWIRE and SEDGE appliances. On the other hand, SEDGE appliances were associated with prolonged treatment duration and more visits needed to complete treatment compared to SWIRE appliances.

This observational study compared palatal rugae morphology in adolescent subjects with normal tooth number and tooth agenesis. Maxillary dental study casts were used to compare rugae number, length and shape. Each study group contained 60 subjects (30 females and 30 males) mean age 13.4 (SD, 1.55) in control and 13.56 (SD, 1.54) years in tooth agenesis groups (p = 0.576). Mean number of missing tooth units in the tooth agenesis group was 2.1. Mean number of primary rugae in the whole sample was 4.35 (SD, 0.98) on the right and 4.33 (SD, 0.92) on the left with no significant differences (p = 0.236 and p = 0.404, respectively). However, the number of secondary rugae on the left (p = 0.006) and fragmentary rugae on the right (p = 0.004) was significantly increased in the tooth agenesis group. The shape of left primary rugae 2 and 3 also differed between groups, tending towards a wavy pattern in the control group and curved in the tooth agenesis group (p = 0.012 and p = 0.004, respectively). In addition, primary rugae 3 was more convergent (p = 0.008) whilst left primary rugae 3 and 5 were orientated in an antero-posterior direction (p = 0.04 for both rugae) in the tooth agenesis group. Subgroup analysis also identified significant associations between patterns of tooth agenesis and rugae number, in addition to shape of primary rugae. The identification of significant differences in rugae pattern between subjects with normal tooth number and agenesis suggests potential commonality in signal pathway disruption during establishment of these structures.

Summary Introduction This prospective clinical cohort study investigated the potential influence of obesity on orthodontic treatment outcome. Methods A prospective cohort of adolescent patients undergoing routine fixed appliance treatment were recruited into normal-weight or obese groups based upon body mass index (BMI) centile and followed up until the completion of treatment. Primary outcome was treatment duration, and secondary outcomes included treatment outcome (occlusal change measured using peer assessment rating [PAR]), appointment characteristics, and compliance measures. Results A total of 45 patients mean age 14.8 (1.6) years were included in the final analysis. The normal-weight group included 23 patients with mean BMI 19.4 (2.4) kg/m2 and the obese group 22 patients with mean BMI 30.5 (3.8) kg/m2. There were no significant differences in baseline demographics between groups, except for BMI and pre-treatment PAR. The normal-weight group had a mean pre-treatment PAR of 25.6 (8.3) and the obese 33.3 (11.8) giving the obese group a more severe pre-treatment malocclusion (P = 0.02). There were no significant differences in treatment duration between groups (P = 0.36), but obese patients needed less time per each additional baseline PAR point compared to normal weight (P = 0.02). Obese patients also needed less appointments compared to normal-weight patients (P = 0.02). There were no significant differences between groups for appointment characteristics or compliance. Finally, obese patients were more likely to experience a great PAR reduction than normal-weight patients (relative risk = 2.6; 95% confidence interval = 1.2–4.2; P = 0.02). Conclusions There were no significant differences in treatment duration between obese and normal-weight patients. Obesity does not appear to be a risk factor for negative orthodontic treatment outcome with fixed appliances.

Dentists' knowledge and expertise, especially in their early career, are primarily shaped during undergraduate studies. This cross-sectional study aimed to assess the knowledge and perception of Syrian under- and postgraduate students regarding diagnosing and managing molar-incisor hypomineralisation (MIH)-affected teeth.Final-year dental students (FY-students), postgraduates in paediatric dentistry (PD-postgraduates) and postgraduates in other lines of specialty (OS-postgraduates) in all Syrian dental schools were invited to participate in an established web-based survey covering the knowledge and attitudes regarding the prevalence, aetiology, diagnosis and management of MIH. Data were analysed with descriptive statistics and Fisher's exact/chi-squared tests at 5%.In total, 1142 post- and undergraduate students from six public and five private dental schools in Syria participated in this study (867 FY-students, 74 PD-postgraduates and 201 OS-postgraduates). PD-postgraduates were found to present statistically significantly better knowledge regarding MIH compared with the two other groups. Only 19% of FY-students and 54% of OS-postgraduates reported themselves familiar with MIH (compared with 97% of PD-postgraduates). Similarly, 18% of FY-students and 27% of OS-postgraduates were capable of diagnosing MIH (compared with 81% of PD-postgraduates). Stainless-steel crowns and direct composite fillings were chosen as most suitable for treating MIH-affected molars from all responders.FY-students and even OS-postgraduates in Syria lack knowledge and confidence when confronted with MIH. The university curricula need to include more educational materials to equip the students with the necessary tools to manage MIH clinically.

There is an association between increased overjet and risk of trauma to the maxillary incisor teeth in children and adolescents. It would therefore seem sensible to recommend overjet reduction as early as possible to help reduce this risk. However, orthodontic outcomes are essentially the same whether you start treatment in the early or late mixed dentition, while early treatment carries a heavier burden on compliance - taking longer and involving more appointments. This article explores the complex association between early overjet reduction and dental trauma in the context of current best evidence. Careful case selection is advised when justifying early intervention for increased overjet based on reducing trauma risk.

OBJECTIVE The aim of this study was to compare the mechanical properties of orthodontic aligners among different commercially available 3D printing devices. MATERIALS AND METHODS Five 3D printers (Ka:rv LP 550, Swinwon; "KAR"), (L120, Dazz 3D; "L12"), (MiiCraft 125, Miicraft Jena; "MIC"), (Slash 2, Uniz; "SLS") and (Pro 95, SprintRay; "PRO") were used to prepare orthodontic aligners with dental resin (Tera Harz TC-85DAW, Graphy). The central incisors of each aligner were cut, prepared and evaluated in terms of Martens-Hardness (HM), indentation-modulus (EIT ) and elastic-index (ηIT ) as per ISO14577-1:2002. Force-indentation curves were recorded and differences among printers were checked with generalized linear regressions (alpha=5%). RESULTS Statistically significant differences were seen for all mechanical properties (P

Orthodontic aligners printed with in-office 3-dimensional (3D) procedures have been described, but no data on their biocompatibility exist. This study investigates the cytotoxicity and estrogenicity of a 3D-printed orthodontic aligner by assessing its biological and behavioral effects.Ten sets of 1 type of aligner were immersed in sterile deionized water for 14 days, and the cytotoxicity and estrogenicity of released factors were assessed via MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assays on human gingival fibroblasts and the estrogen-sensitive MCF-7 and the estrogen-insensitive MDA-MB-231 breast cancer cell lines. 17β-Estradiol and bisphenol-A were used as positive controls. The statistical analysis of data was performed with generalized linear models at a 0.05 level of significance.No signs of cytotoxicity were seen for the aligner samples for concentrations (v/v) of 20% (P = 0.32), 10% (P = 0.79), or 5% (P = 0.76). The antioxidant activity expressed as the capacity to reduce intracellular levels of reactive oxygen species was not affected in the aligner samples (P = 0.08). No significant estrogenicity was induced by the aligner samples compared with eluents from the negative control for both MCF-7 (P = 0.65) and MDA-MB-231 (P = 0.78). As expected, 17β-Estradiol and bisphenol-A stimulated MCF-7 cell proliferation, whereas no effect was observed on MDA-MB-231 cells.In conclusion, if any factors were released during the 14-day aging of 3D-printed aligners in water, these were not found to be cytotoxic for human gingival fibroblasts and did not affect their intracellular reactive oxygen species levels. Moreover, no estrogenic effects of these putative eluates were observed based on an E-screen assay.

The mammalian dentition is a serially homogeneous structure that exhibits wide numerical and morphological variation among multiple different species. Patterning of the dentition is achieved through complex reiterative molecular signaling interactions that occur throughout the process of odontogenesis. The secreted signaling molecule Sonic hedgehog (Shh) plays a key role in this process, and the Shh coreceptor growth arrest-specific 1 (Gas1) is expressed in odontogenic mesenchyme and epithelium during multiple stages of tooth development. We show that mice engineered with Gas1 loss-of-function mutation have variation in number, morphology, and size of teeth within their molar dentition. Specifically, supernumerary teeth with variable morphology are present mesial to the first molar with high penetrance, while molar teeth are characterized by the presence of both additional and absent cusps, combined with reduced dimensions and exacerbated by the presence of a supernumerary tooth. We demonstrate that the supernumerary tooth in Gas1 mutant mice arises through proliferation and survival of vestigial tooth germs and that Gas1 function in cranial neural crest cells is essential for the regulation of tooth number, acting to restrict Wnt and downstream FGF signaling in odontogenic epithelium through facilitation of Shh signal transduction. Moreover, regulation of tooth number is independent of the additional Hedgehog coreceptors Cdon and Boc, which are also expressed in multiple regions of the developing tooth germ. Interestingly, further reduction of Hedgehog pathway activity in Shhtm6Amc hypomorphic mice leads to fusion of the molar field and reduced prevalence of supernumerary teeth in a Gas1 mutant background. Finally, we demonstrate defective coronal morphology and reduced coronal dimensions in the molar dentition of human subjects identified with pathogenic mutations in GAS1 and SHH/GAS1, suggesting that regulation of Hedgehog signaling through GAS1 is also essential for normal patterning of the human dentition.

The purpose of this investigation of untreated monozygotic and dizygotic twins was to identify the genetic and environmental components to the facial soft tissue growth.The sample consisted of 52 untreated monozygotic twins (36 male and 16 female) and 46 untreated dizygotic twins (23 male and 23 female) from the Forsyth Moorrees Twin Study (1959-1975).Lateral cephalograms were taken at 12 and 17 years of age and traced to analyse facial convexity, nasolabial angle, upper and lower lip thickness, upper and lower lip profile and nose prominence. The genetic and environmental components of variance were analysed with structural equation modelling for multilevel mixed-effects model.At 12 years of age, strong additive genetic influence was seen for facial convexity (70%), upper lip profile (66%) and nose prominence (65%), whereas strong dominant genetic components were found for upper lip thickness (56%). Nevertheless, under unique environment influence were nasolabial angle (58%), lower lip profile (51%) and lower lip thickness (64%). At 17 years of age, only upper lip thickness (55%) and nose prominence (84%) were under strong additive genetic control, while the rest of the variables were under strong dominant genetic control. The only exception was lower lip thickness (61%), which is still influenced by the unique environment.Although monozygotic/dizygotic twins share at least part of their genome, at both times either additive, dominant or environmental components were found. Nevertheless, at 17 years of age most of the variables are either under additive or dominant genetic influence.

OBJECTIVES To identify the 10 most numerically prolific authors publishing in the field of orthodontics for each year over the last decade (2011-2020), describe the characteristics of these outputs and identify trends in the types of study being published. MATERIALS AND METHODS A Scopus literature search was conducted to identify the 10 most numerically prolific publishing authors in orthodontics for each year during this decade. Number and characteristics of all publications for each author were analysed with descriptive and inferential statistics. RESULTS Forty-nine different individual authors were identified who were collectively prolific for between 1-8 years within the assessment decade. These authors published a total of 2025 papers, with a median annual output of 18 papers per year; however, half of these authors published between 15-24 papers per year (range 5-200). Amongst authors, 2 or more collaborated on only 7% of the identified papers. The median number of authors per paper was 5 (range 1-27) with significant variation according to study design (P

The aim of this international survey was to assess knowledge concerning the design, conduct, critical appraisal and synthesis of clinical studies among senior orthodontic postgraduate residents.Senior postgraduate residents from four universities in Europe and the United States were invited to complete a custom questionnaire. The overall correct answer score and proportion of residents correctly answering each of the 10 questions within the survey were analysed with descriptive statistics, analysis-of-variance, chi-squares test and linear regression at 5%.A total of 46 residents with mean age of 30.4 years scored an overall % correct score of 48.8%±13.8%, with the % of correct answers to each question ranging from 7 to 89%. The worst-answered questions pertained to correctly characterizing sensitivity and specificity (7%), number needed to treat (9%), credibility of trial synthesis in meta-analysis (35%) and publication bias (37%). The vast majority of postgraduate students could correctly identify entities that can be blinded in a randomized trial (89%), statistical power of a trial (74%) and proper methods for random allocation sequence (67%). No statistically significant differences were found among the four included universities, while residents having obtained another degree apart from dentistry scored better than others (+9.5%; 95% confidence interval: 0.6% to 18.5%; P=0.04).Postgraduate residents in orthodontics possessed moderate knowledge on evidence-based methodology. Efforts should be reinforced to assimilate research methodology perspectives in the postgraduate curricula of universities, in order to further augment critical training of orthodontic specialists.

To assess the frequency and quantity of interproximal contact loss (ICL) between implant restorations and adjacent teeth after at least 10 years of follow-up (FU).Thirty-nine patients (median age 57.3 years) with 80 implants were re-examined at least 10 years after insertion of final restorations (single crowns or fixed dental prostheses (FDPs)). Baseline (insertion of the restorations) and FU examinations encompassed the following: Stone casts were scanned and superimposed for metric assessment of tooth movements, radiographs, and clinical measurements. Outcome measures at implant sites were as follows: the extent of tooth movement and the frequency of interproximal contact loss [ICL], peri-implant marginal bone levels [MBLs], and clinical measurements (plaque control record [PCR], Bleeding on Probing [BOP], and probing depth [PD]). Data were analyzed statistically with generalized regression modeling with robust standard errors to account for within-patient clustering at 5%.Interproximal contact loss for at least one contact point after 10 years was observed in 50% of all implants (with open interproximal spaces up to 1.64 mm). Mesial contact points were significantly more prone to ICL than distal ones (relative risk [RR] = 1.79; 95% confidence interval [CI] = 1.07-2.99; p = .03). The type of restoration had a significant effect on ICL, with FDPs of 2 implants being significantly more prone to mesial ICL than single crowns (RR = 1.52; 95% CI = 1.02-2.25; p = .04). ICL was also associated with a significant increase in PD (+0.46 mm (95% CI = 0.04-0.88 mm; p = .03)) compared to implant sites without ICL. BOP, MBLs, and PCR were not significantly influenced by ICL.Interproximal contact loss was a common finding in 50% of the implant sites and was significantly associated with an increase in PD.

Summary Background Orthodontic patients wearing fixed appliances are susceptible to traumatic dental injuries during a wide range of sporting activities. This randomized clinical trial investigated wearability and preference of mouthguards during sporting activities in patients undergoing orthodontic treatment with fixed appliances. Methods A prospective three-arm crossover randomized clinical trial conducted in the UK. Thirty patients in active orthodontic treatment with fixed appliances undertaking at least 120 minutes of contact sport per 6–8-week observation period were randomly assigned to one of six mouthguard allocation sequences consisting of three mouthguard types: (MG1) custom-made laboratory constructed, (MG2) mouth-formed OPRO® Gold Braces, and (MG3) pre-fabricated Shock Doctor® Single Brace. Patients completed a nine-outcome 100-mm visual analogue scale (VAS) questionnaire relating to mouthguard wearability during sport. Once feedback was completed, subjects were allocated the next mouthguard in the sequence. At study-end, subjects were asked to identify their preferred mouthguard. Results Twenty-four patients (median age = 13; inter-quartile range 12–14.5 years) completed n = 72 follow-up questionnaires with most playing rugby union or field hockey. Considering VAS score as a continuous variable, for comfort, stability, hardness, ability to breathe, ability to not cause nausea, and inclination to chew, MG2 performed better than MG3. For categorization of VAS score into low (less than 80 mm) or high (at least 80 mm) wearability, for comfort, stability, ability to not cause nausea, and inclination to chew, MG1 and MG2 also rated superior to MG3. Patients preferred MG1 overall. Conclusions This randomized clinical trial found that during contact sport patients in fixed appliances reported superior wearability for custom-made and mouth-formed mouthguards in comparison to pre-fabricated. Overall, patients preferred custom-made mouthguards. Clinical trials registration ClinicalTrials.gov: NCT04588831.