Search

Groundwater potential in Morocco’s Souss-Massa mountainous basin (SMMB) is being identified using geospatial tools and geological data. We deployed four mathematical models, namely Data-Driven Multi-index Overlay (DMIO), Geometric Average (GA), Support Vector Machine (SVM), and Logistic Regression (LR), to establish data-driven patterns among the nine influencing factors, primarily drainage density, permeability, slope, distance to rivers, elevation, lineament density, distance to lineaments, intersection node density, and rainfall. Based on the Concentration-Area (C-A) fractal approach, the findings of the four models were developed and classified into five levels of potentiality ranging from very low to very high. The regions designated as having high and very high potentialities for the DMIO, GA, SVM, and LR models, respectively, account for 22.44 %, 9.80 %, 19.36 %, and 26.77 % of the overall basin. We validated the models by calculating each model's area under the ROC curve (AUC). The estimated AUC values are more than 70 %, suggesting the model performs well. The four models' performance was compared, revealing that the SVM model outperforms the others. Gravimetric data shows that possible groundwater zones closely coincide with gravimetric lineaments. The findings of this study can provide valuable insights to decision-makers, allowing them to improve decision-making processes and develop holistic groundwater resource management in the Souss-Massa mountainous basin (SMMB).

In a desalination station, the remineralization step of osmosis water (OW) is essential to return to produced water its calco-carbonic equilibrium. For this, the use of calcite CaCO3 or lime Ca(OH)2 for water equilibrium in post-treatment processes needs the utilization of both CO2 and/or H2SO4 in osmosis water. For this reason, we describe here in detail, the effect of H2SO4 and CO2 on the remineralization process in a post-treatment desalination plant, especially with using hydrated lime Ca(OH)2 and calcite contactor (CaCO3)·In this paper, the different cases were discussed and investigated, by monitoring several indicator parameters such as pH, Ca2+ content, alkalinity, Langelier Index, etc. After the remineralization stage, we have shown that the efficiency of the remineralization process by CaCO3 or Ca(OH)2 depends on CO2 or H2SO4 content. Remineralization by CaCO3 (limestone) coupled with CO2 acidification is easy and more operator-friendly compared to the process using Ca(OH)2 (lime); it provides a clean environment for people working in the plant. In addition, the H2SO4 injection in the pretreatment stage followed by CaCO3 contact could lead to great results and correct calco-carbonic equilibrium. In the end, a comparative study of the investment cost in each process shows that the acidification of raw water with sulfuric acid (pretreatment) is the cheapest one, according to many studies. But on the other hand, the direct injection of CO2 is the easiest one to use for water balancing.

The Sidi Ifni region in southwest Morocco is mainly composed of crystalline rocks with limited groundwater storage capacity. These water resources drain in particular fault zones with high fracture permeability. The main objective of this study is to describe the geological structure of the region to optimize future drilling locations. The gravity data were processed using various techniques, such as total horizontal gradient, tilt derivative, and Euler deconvolution, in conjunction with the interpretation of the geological data, to create a new structural map. This map confirms the presence of many previously identified or inferred faults and identifies significant new faults with their respective trends and depths. Analysis of this map shows that major faults are oriented NNE-SSW and NE-SW, while minor faults are oriented E-W, NW-SE, and NNW-SSE. The superposition of the hydrogeological data and the structural map reveals that the high groundwater flow values in the boreholes are located in the vicinity of the major faults and talwegs. The structures deduced from the filtering and interpretation of the gravity data suggest that the hydrogeological system of the Ifni Inlier is controlled by its structures. To confirm this impact, a high-resolution electrical resistivity map (7200 Hz) was used, with penetration depths ranging from 84 to 187 m. Negative boreholes, located in high resistivity ranges corresponding to sound basement formations without fault crossings, showed high resistivity values. The positive holes, located in anomalies with low linear resistivity, revealed the impact of fault crossings, which drain water and tend to decrease the resistivity values of the formations. Therefore, these new structural maps will assist in planning future hydrogeological studies in this area.

This study aimed to evaluate the extent and severity of water erosion in the Toudgha river catchment in the Central High Atlas of Morocco using two different erosion models, the Erosion Potential Model (EPM) and the Priority Actions Programme/Regional Activity Centre (PAP/RAC) model. From the modeling results, the catchment was affected by varying degrees of erosion, ranging from “very slight” to “excessive”, with different locations identified under each model. The very high erosion areas were located in the extreme northwest of the catchment area for both of the applied models, covering 9.65% (according to PAP/RAC) and 8.56% (EPM) of the total area primarily driven by factors such as intense rainfall events, limited vegetation cover, high soil erodibility due to low organic matter content and coarser soil texture, and human activities such as overgrazing and land use changes, which exacerbate the effects of these natural factors on water erosion in these semi-arid areas. The study’s findings suggest that erosion is a significant concern in these environmental areas and provide valuable information for designing effective erosion control measures and guiding soil and environmental management practices. Both models effectively simulated the erosion phenomenon and provided useful tools for soil and environmental management. The EPM model can be used to design effective erosion control measures, while the PAP/RAC model can be used to develop a comprehensive strategy for the sustainable management of the catchment area. These results have implications for the implementation of effective erosion control measures in mountainous watersheds and highlight the need for further research in this area.

Groundwater from alluvial aquifers is a critical source of water supply for rural agriculture, particularly in semi-arid and arid regions. Effective management of these aquifers requires an understanding of the factors that influence their water resources. In this study, we present a case study of the Tata watershed in southeastern Morocco, where the economy is heavily dependent on agriculture and relies exclusively on groundwater. We demonstrate the importance of integrating geological, hydrogeological, and geophysical methods to characterize the aquifer and evaluate groundwater productivity. Analysis of 64 data wells tapping into the aquifer revealed significant disparities in flow yields, ranging from 0.05 to 15.50 L per second. The highest yields were found between depths of 12 and 43 m, which correspond to the alluvium and the altered and fractured part of its substrate. The maximum alluvial thickness of 57 m was determined using geo-electrical prospecting. A piezometric map was created to define the recharge zones, which correspond to the lateral contributions of the bordering Georgian limestones, and infiltration of both rain and surface water along the Tata wadi. Since 1987, there has been a continuous drop in groundwater level, which can be attributed to the increase in irrigated areas following financial incentives provided by the Moroccan government to the agricultural sector. A proposal has been made for the construction of a recharge dam to enable the recharge of the alluvial aquifer. This development is expected to serve a dual purpose by mitigating the deleterious impacts of flooding and facilitating the gradual water infiltration of the alluvial aquifer. This case study provides insights into the hydrodynamics of the aquifer and establishes a simplified model of its functioning. These findings have important implications for the management of alluvial aquifers in similar regions.

During the last decade, climate change has generated extreme rainfall events triggering flash floods in short periods worldwide. The delimitation of flood zones by detailed mapping generally makes it possible to avoid human and economic losses, especially in regions at high risk of flooding. The Taguenit basin, located in southern Morocco, is a particular case. The mapping of the flood zones of this basin by the method of the Flood Hazard Index (FHI) in a GIS geographic information systems environment was based on the multi-criteria analysis, taking into consideration the seven parameters influencing these extreme phenomena, namely rainfall, slope, flow accumulation, drainage network density, distance from rivers, permeability, and land use. Average annual rainfall data for 37 years (1980 to 2016) was used in this study for floodplain mapping. A weight was calculated for each parameter using the Analytical Hierarchy Process (AHP) method. The combination of the maps of the different parameters made it possible to draw up a final map classified into five risk intervals: very high, high, moderate, lower and very lower presenting, respectively, 8.04%, 20.63%, 31.47%, 15.36%, and 24.50% of the area of the basin. The reliability of this method was tested by a Flood susceptibility analysis. The results generated by the Flood Hazard Index (FHI) model are similar to those of previous historical events. Realistic and applicable solutions have been proposed to minimize the impact of these floods as much as possible.