Search

Abstract In tissue culture, efficient nutrient availability and effective control of callus contamination are crucial for successful plantlet regeneration. This study was aimed to enhance callogenesis, callus regeneration, control callus contamination, and substitute iron (Fe) source with FeO-NPs in Murashige and Skoog (MS) media. Nanogreen iron oxide (FeO-NPs) were synthesized and well characterized with sizes ranging from 2 to 7.5 nm. FeO-NPs as a supplement in MS media at 15 ppm, significantly controlled callus contamination by (80%). Results indicated that FeCl3-based FeO-NPs induced fast callus induction (72%) and regeneration (43%), in contrast FeSO4-based FeO-NPs resulted in increased callus weight (516%), diameter (300%), number of shoots (200%), and roots (114%). Modified media with FeO-NPs as the Fe source induced fast callogenesis and regeneration compared to normal MS media. FeO-NPs, when applied foliar spray, increased Plant fresh biomass by 133% and spike weight by 350%. Plant height increased by 54% and 33%, the number of spikes by 50% and 265%, and Chlorophyll content by 51% and 34% in IRRI-6 and Kissan Basmati, respectively. Additionally, APX (Ascorbate peroxidase), SOD (Superoxide dismutase), POD (peroxidase), and CAT (catalase) increased in IRRI-6 by 27%, 29%, 283%, 62%, while in Kissan Basmati, APX increased by 70%, SOD decreased by 28%, and POD and CAT increased by 89% and 98%, respectively. Finally, FeO-NPs effectively substituted Fe source in MS media, shorten the plant life cycle, and increase chlorophyll content as well as APX, SOD, POD, and CAT activities. This protocol is applicable for tissue culture in other cereal crops as well.

Abstract Salinity is the major abiotic stress among others that determines crop productivity. The primary goal is to examine the impact of Zinc Oxide Nanoparticles (ZnO NPs) on the growth, metabolism, and defense systems of pea plants in simulated stress conditions. The ZnO NPs were synthesized via a chemical process and characterized by UV, XRD, and SEM. The ZnO NPs application (50 and 100) ppm and salt (50 mM and 100 mM) concentrations were carried out individually and in combination. At 50 ppm ZnO NPs the results revealed both positive and negative effects, demonstrating an increase in the root length and other growth parameters, along with a decrease in Malondialdehyde (MDA) and hydrogen peroxide concentrations. However, different concentrations of salt (50 mM and 100 mM) had an overall negative impact on all assessed parameters. In exploring the combined effects of ZnO NPs and salt, various concentrations yielded different outcomes. Significantly, only 50 mM NaCl combined with 50 ppm ZnO NPs demonstrated positive effects on pea physiology, leading to a substantial increase in root length and improvement in other physiological parameters. Moreover, this treatment resulted in decreased levels of MAD, Glycine betaine, and hydrogen peroxide. Conversely, all other treatments exhibited negative effects on the assessed parameters, possibly due to the high concentrations of both stressors. The findings offered valuble reference data for research on the impact of salinity on growth parameters of future agriculture crop.

Abstract The aim of current study was to prepared zinc oxide nanofertilzers by ecofriendly friendly, economically feasible, free of chemical contamination and safe for biological use. The study focused on crude extract of Withania coagulans as reducing agent for the green synthesis of ZnO nano-particles. Biosynthesized ZnO NPs were characterized by UV–Vis spectroscopy, XRD, FTIR and GC–MS analysis. However, zinc oxide as green Nano fertilizer was used to analyze responses induced by different doses of ZnO NPs [0, 25, 50,100, 200 mg/l and Zn acetate (100 mg/l)] in Triticum aestivum (wheat). The stimulatory and inhibitory effects of foliar application of ZnO NPs were studied on wheat (Triticum aestivum) with aspect of biomass accumulation, morphological attributes, biochemical parameters and anatomical modifications. Wheat plant showed significant (p < 0.01) enhancement of growth parameters upon exposure to ZnO NPs at specific concentrations. In addition, wheat plant showed significant increase in biochemical attributes, chlorophyll content, carotenoids, carbohydrate and protein contents. Antioxidant enzyme (POD, SOD, CAT) and total flavonoid content also confirmed nurturing impact on wheat plant. Increased stem, leaf and root anatomical parameters, all showed ZnO NPs mitigating capacity when applied to wheat. According to the current research, ZnO NPs application on wheat might be used to increase growth, yield, and Zn biofortification in wheat plants.

An integrated sensing device for irrigation scheduling was developed to assess the soil–plant–atmosphere continuum for irrigation scheduling. A field experiment was carried out to evaluate ISDI performance and CWSI estimation across various irrigation regimes in wheat crop at WTC farm, ICAR-IARI, New Delhi, India. The experiment considered were full irrigation (FI) and various deficit irrigation levels (DI-15, DI-30, DI-45, and DI-60), receiving 15, 30, 45, and 60% less water in comparison to FI, respectively. The calibration and performance of the ISDI sensor probes was done with gravimetric methods along with time domain reflectometry (TDR) and a handheld infrared thermometer. The field calibration of the ISDI's soil moisture probe and TDR gave promising results, with R2 values ranging from 0.76 to 0.81 and 0.81 to 0.86, respectively, for soil depths up to 45 cm. ISDI's infrared sensor probe also demonstrated strong alignment with a handheld infrared thermometer (R2: 0.95), indicating reliable methods. Furthermore, a regression equation of lower baseline and upper threshold for CWSI computation was derived as (Tc–Ta)ll = 1.97 × VPD – 1.43 (R2:0.86) and 1.93 °C, respectively. It was recommended to initiate irrigation when CWSI ≥ 0.35 for wheat to achieve optimal crop yields. HIGHLIGHTS The study emphasizes the capabilities of the recently introduced integrated sensing device for irrigation scheduling system, which integrates soil–plant–climate data into a single, robust sensor and assesses its accuracy in comparison to conventional methods and tools.; It also underscores the significance of establishing sensor calibration equations specific to each location and formulating baseline equations customized for distinct regional conditions.;

Abstract Biological and green synthesis of nanomaterial is a superior choice over chemical and physical methods due to nanoscale attributes implanted in a green chemistry matrix, have sparked a lot of interest for their potential uses in a variety of sectors. This research investigates the growing relevance of nanocomposites manufactured using ecologically friendly, green technologies. The transition to green synthesis correlates with the worldwide drive for environmentally sound procedures, limiting the use of traditional harsh synthetic techniques. Herein, manganese was decorated on ZnO NPs via reducing agent of Withania-extract and confirmed by UV-spectrophotometry with highest peak at 1:2 ratio precursors, and having lower bandgap energy (3.3 eV). XRD showed the sharp peaks and confirms the formation of nanoparticles, having particle size in range of 11–14 nm. SEM confirmed amorphous tetragonal structure while EDX spectroscopy showed the presence of Zn and Mn in all composition. Green synthesized Mn-decorated ZnO-NPs screened against bacterial strains and exhibited excellent antimicrobial activities against gram-negative and gram-positive bacteria. To check further, applicability of synthesized Mn-decorated Zn nanocomposites, their photocatalytic activity against toxic water pollutants (methylene blue (MB) dye) were also investigated and results showed that 53.8% degradation of MB was done successfully. Furthermore, the installation of green chemistry in synthesizing nanocomposites by using plant extract matrix optimizes antibacterial characteristics, antioxidant and biodegradability, helping to build sustainable green Mn decorated ZnO nanomaterial. This work, explains how biologically friendly Mn-doped ZnO nanocomposites can help reduce the environmental impact of traditional packaging materials. Based on these findings, it was determined that nanocomposites derived from biological resources should be produced on a wide scale to eradicate environmental and water contaminants through degradation.

A two-year field experiment was conducted to integrate soil moisture stress with the Crop Water Stress Index (CWSI) for optimizing irrigation in winter wheat (Triticum aestivum L.) under varying irrigation regimes. The study took place at the Water Technology Centre (WTC-02) of ICAR-IARI, New Delhi, where the climate shows a blend of monsoon-influenced humid subtropical and semi-arid conditions. Using a randomized block design (RBD), five irrigation treatments were applied: full irrigation and deficit irrigation (DI) at 15 %, 30 %, 45 %, and 60 % levels. Canopy and ambient air temperature data, along with vapor pressure deficit (VPD), were recorded using a developed integrated sensing device to empirically determine the lower baseline equations and upper threshold for CWSI computation at pre-heading and post-heading stages. The slope (m), intercept (c) of the lower baseline equation, and upper threshold (UL) for pre-heading and post-heading were found: m: −1.94, c: −1.33, UL: 1.92°C and m: −1.30, c: −2.37, UL: 2.0°C, respectively. Results showed that increasing water deficit levels led to significant reductions in grain yield, biomass production, and harvest index. A strong negative correlation (R² = 0.95 and 0.93) between mean seasonal CWSI and yield attributes highlighted the utility of CWSI in yield prediction under varying irrigation regimes. It is recommended to schedule irrigation based on the CWSI approach when CWSI ≥0.35 for optimum wheat yields. Integrating CWSI with soil moisture stress provides valuable real-time insights into crop water status, enabling more precise and smart irrigation scheduling.

This study was designed to scrutinize the practical health index of uroliths for investigating composition, structural characterization, phase quantification and shape of kidney stone patients with respect to socioeconomically status in territory of Bahawalpur, southern Punjab, Pakistan. Morphology of the kidney stones were determined using SEM. The Ultra violet spectra of kidney stones in narrow range of 220–280 nm. Quantitative phase analysis of stones indicates as oxalate, calcium oxalate monohydrate, calcium oxalate dehydrates, calcium phosphate, cysteine and uric acid with 40.51 %, 26.24 %, 14.24 %, 36.45 %,13.18 % and 9.86 % respectively. A survey analysis also supports the vitro data showing patient age with 30–40 years with more predominance in males than females. Metabolic abnormalities were detected in 75 % patients with stone recurrence 15 % complained of having digestive disease. The overall concludes from qualitative and quantitative results suggested the community for preventive measures in reducing the risk of pervasiveness and relapse of urolithiasis.

Lactose intolerance is a gastrointestinal condition in which lactase enzyme is unable to hydrolyze lactose into glucose and galactose. It is manifested by diarrhea, flatulence, cramping, borborygmi, and abdominal discomfort following lactose ingestion. Adverse effects also include bone decay, fractures, and osteoporosis. The development of condition due to genetic, or environmental factors could be diagnosed by hydrogen breath test, lactose tolerance test, intestinal biopsies, and genetic tests. Frequently employed traditional therapeutic approaches include lactase supplements, lactose free products, non-dairy alternatives, and probiotics. With increase in demand of more efficient diagnostic and therapeutic criteria for lactose intolerance advanced nanotechnology-based diagnostic, therapeutic, and managing approaches have been developed. Development of nanobiosensors, nano-detectors, and lactose trackers for efficient diagnosis, enzyme nanoimmobilization strategies including adsorption, encapsulation, and entrapment, delivery strategies for lactase enzyme, probiotics, and production of lactose free products had been successfully investigated under the wide umbrella of nanotechnology. This review focuses on the developments being done by the amalgamation of conventional diagnostic and therapeutic approaches. It covers the novel nanotechnological applications discovered over the years to develop the most effective diagnostic, and therapeutic procedures to ameliorate the symptoms in lactose intolerant individuals.

Raisins, derived from dried grapes, represent a valuable commodity rich in secondary metabolites, particularly volatile organic compounds (VOCs). The primary objective of this review is to identify the VOCs that are influencing the aromatic profile of raisins to improve consumer preferences. However, extensive research has been done to optimize grape drying methods for different raisin attributes. In the context of this review, an in-depth investigation of published literature revealed the extraction of over 120 VOCs from raisins using SPME. Furthermore, we explored factors shaping raisin aroma and the sources of VOC generation. This review aims to pinpoint research gaps and provide an opportunity for future developments in studying raisins' aroma. This involves integrating advanced analytical techniques, examining processing method impacts, and considering consumer perception to enhance the overall understanding of raisin aromas. The outcomes are anticipated to provide valuable insights for the industry and the scientific community.

With rapid growth of population, global food demand and environmental stressors such as heavy metal contamination are threatening task for researchers. However, advent of nanotechnology in recent years has emerged as a promising solution to these challenges. The present study aimed was to investigated the effect of biosynthesized Fe2O3-NPs in the mitigation of Cr stress on Triticum aestivum. Phyto-Synthesized Fe2O3-NPs were prepared and confirmed by Ultraviolet–visible (UV–Vis) spectra at peak at 299 nm. Fourier Transformed Infrared Spectroscopy (FTIR) results showed presence of Fe–O. Scanning electron microscopy (SEM) showed a round with irregular patterns of Fe2O3-NPs. X-ray diffraction (XRD) analysis revealed a crystalline rhombohedral structure. The zeta potential (ZP) and dynamic light scattering (DLS) measurements of Fe2O3-NPs with values of −20.6 mV, suggesting appropriate physical stability. Morphological analysis of Triticum aestivum in presence of Fe2O3-NPs showed a significant decrease in shoot, root length 18% and 24% respectively and weight 18% and 26% under stress of 350 ppm concentration of Cr. On contrary, Fe2O3-NPs showed an increase in root and shoot length of 8% and 12% and weight 19% and 30% respectively. Fe2O3-NPs improved antioxidant enzyme activities like Superoxide dismutase, Peroxidase, Catalase, and Ascorbate Peroxidase by reducing the effect of Cr. Histochemical analysis also showed an improvement in the viability and permeability of cells on Fe2O3-NPs application. In conclusion, this study confirmed the potential of Fe2O3-NPs to improve the performance of T. aestivum under Cr stress by enhancing the antioxidant enzyme activities.

Abstract The indoor cultivation of lettuce in a vertical hydroponic system (VHS) under artificial lighting is an energy-intensive process incurring a high energy cost. This study determines the optimal daily light integral (DLI) as a function of photoperiod on the physiological, morphological, and nutritional parameters, as well as the resource use efficiency of iceberg lettuce (cv. Glendana) grown in an indoor VHS. Seedlings were grown in a photoperiod of 12 h, 16 h, and 20 h with a photosynthetic photon flux density (PPFD) of 200 µmol m−2 s−1 using white LED lights. The results obtained were compared with VHS without artificial lights inside the greenhouse. The DLI values for 12 h, 16 h, and 20 h were 8.64, 11.5, and 14.4 mol m−2 day−1, respectively. The shoot fresh weight at harvest increased from 275.5 to 393 g as the DLI increased from 8.64 to 11.5 mol m−2 day−1. DLI of 14.4 mol m−2 day−1 had a negative impact on fresh weight, dry weight, and leaf area. The transition from VHS without artificial lights to VHS with artificial lights resulted in a 60% increase in fresh weight. Significantly higher water use efficiency of 71 g FW/L and energy use efficiency of 206.31 g FW/kWh were observed under a DLI of 11.5 mol m−2 day−1. The study recommends an optimal DLI of 11.5 mol m−2 day−1 for iceberg lettuce grown in an indoor vertical hydroponic system.

Continuous exposure to nanoparticles (NPs) poses potential hazards to human health and animal life, necessitating thorough monitoring and investigation of environmental contaminants to mitigate their adverse effects. Therefore, this study investigates the histopathological alterations, serum biochemistry, oxidative stress biomarkers, and genotoxicity endpoints induced by crystalline silica (C-SiO2) NPs, sliver-silica (Ag-SiO2) and zinc-oxide silica (ZnO-SiO2) NPs in Rattus Norvegicus. Twenty-five rats were blindly distributed into groups (A, B, C, & D), with B, C, and D administered 500 µg/kg of ZnO-SiO2, Ag-SiO2, and C-SiO2 NPs intravenously (IV), while A served as the control. Severe histopathological alterations, including widening of urinary spaces, edema, necrosis of neurons, atrophy of neurons, myofibrillolysis, inflammatory exudate, disorganization of splenic cells, and pyknotic nuclei, were observed in C-SiO2 NPs-exposed rats across study organs. Compared to controls, C-SiO2 NPs significantly altered 95 % of serological, DNA damage, histopathological, and oxidative stress parameters. Ag-SiO2 and ZnO-SiO2 NPs affected 75 % and 60 % of these parameters, respectively. Among the NPs, C-SiO2 exhibited the most adverse effects. The study concludes that SiO2 coating on metal (Ag) and metal oxide (ZnO) rendered these substances biocompatible, suggesting potential applications for reducing adverse effects in living organisms. These findings also contribute to the genotoxic profiling of NPs and their potential health hazards upon exposure to humans.

Researchers are still faced, with the challenge of creating a readily fabricated ion-imprinted electrode that can quickly and precisely detect trace metal ions. In this paper, a novel surface ion-imprinted polymer (sur-IIP) based on Au nanoparticle with high conductivity was synthesized and modified on the glassy carbon electrode (GCE). From structural characterization, the functional monomer, thiolated chitosan, was self-assembled on the surface of Au nanoparticle by the ‘Au-S’ bond and formed an imprinted layer in 15 nm thick. During the electrochemical measurement, different detection parameters such as supporting electrolyte, pH, deposition potential, deposition time were optimized under the optimal conditions, the modified electrode exhibited a extensive linear range from (0.05–30 μmol L-1) and lowest limit of detection was 0.0487 μmol L-1. The developed sensor was applied for the detection of traces of Cu (II) ions from tap water as well as from drinking water successfully. Compared with other surface ion-imprinted polymers, the sur-IIP in this paper were more conductive and could be modified tightly on the electrode by dip-dropping. The overall strategy of preparing the ion-imprinted polymer on the surface of Au nanoparticles were accessible and efficient.

The utilization of nanomaterials and their compatibility with biological systems have become major concern for the researcher. In this particular study, Fe2O3 nanoparticles (NPs) were synthesized using both green chemistry and chemical-reduction precipitation methods. The biological Fe2O3 NPs were well characterized and found to have a size of 23.01 nm, while the chemical Fe2O3 NPs had a size of 40.80 nm. Stable Fe2O3 NPs were allowed to interact with the serum of cancer patients for different time intervals (24 h, 48 h, and 72 h). The chemical Fe2O3 NPs yielded 41 differentially expressed proteins, whereas the biological Fe2O3 NPs yielded 103. Through proteomics algorithms, a deeper understanding of the obtained proteins revealed the presence of domains and motifs that are primarily associated with the onset of oncogenesis. Notably, key oncogenic and onco-histone protein domains such as PLEC, DEXDc, H2A, and H2B were specifically and uniquely present in the biologically prepared Fe2O3 NP. In conclusion, the efficient use of biological Fe2O3 NPs demonstrated significant potential in adsorbing proteins and peptides, which could be utilized in diagnostic and therapeutic strategies.

Herein bimetallic nanocomposites Ag with nickel and cobalt were synthesized by using the extract of W. coagulans. Nanocomposites synthesis were confirmed by using UV-Visible at 430 nm for and 504 nm for Ag@Ni and Ag@Co respectively. From XRD technique it was established that nanocomposites have crystalline nature and face-centered cubic structure. A strong antibacterial behavior toward Gram-positive Bacteria Staphylococcus aureus with 48.9% and 32.1% inhibition for Ag@Co and Gram-negative bacteria E. coli with 33.1% and 25.7% inhibition zone were observed for Ag@Ni respectively. Next the composites exhibited electrifying 90.2% and 82% degradation for Ag@Co and Ag@Ni against methyl orange (MO) through photocatalysis. Furthermore, Ag@Ni and Ag@Co nanocomposites showed efficient adsorption capacity of heavy metal (lead) at pH 7 within 45 min and 90% for adsorptive removal of lead ions from water with significant antioxidant potential. The current finding suggested, silver-based nanocomposites as an appropriate and promising candidate for efficient adsorptive and catalytic potentials removal of toxic pollutants.

Bacterial infectious disorders are becoming a major health problem for public health. The zeolitic imidazole framework-8 with a novel Cordia myxa extract-based (CME@ZIF-8) nanocomposite showed variable functionality, high porosity, and bacteria-killing activity against Staphylococcus aureus, and Escherichia coli strains have been created by using a straightforward approach. The sizes of synthesized zeolitic imidazole framework-8 (ZIF-8) and CME@ZIF-8 were 11.38 nm and 12.44 nm, respectively. Prepared metal organic frameworks have been characterized by gas chromatography–mass spectroscopy, Fourier transform spectroscopy, UV–visible spectroscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. An antibacterial potential comparison between CME@ZIF-8 and zeolitic imidazole framework-8 has shown that CME@ZIF-8 was 31.3%, 28.57%, 46%, and 47% more efficient than ZIF-8 against Staphylococcus aureus and 43.7%, 42.8%, 35.7%, and 70% more efficient against Escherichia coli, while it was 31.25%, 33.3%, 46%, and 46% more efficient than the commercially available ciprofloxacin drug against Staphylococcus aureus and 43.7%, 42.8%, 35.7%, and 70% more efficient against Escherichia coli, respectively, for 750, 500, 250, and 125 μg mL−1. Minimum inhibitory concentration values of CME@ZIF-8 for Escherichia coli and Staphylococcus aureus were 15.6 and 31.25 μg/mL respectively, while the value of zeolitic imidazole framework-8 alone was 62.5 μg/mL for both Escherichia coli and Staphylococcus aureus. The reactive oxygen species generated by CME@ZIF-8 destroys the bacterial cell and its organelles. Consequently, the CME@ZIF-8 nanocomposites have endless potential applications for treating infectious diseases.

With increasing population and industrialization, the water quality of freshwater sources like rivers, lakes, and ponds is becoming increasingly degraded. Most of the rivers in India are becoming polluted, including the Godavari. With the construction of dams, new industries and unsustainable agricultural practices in the Godavari basin, the water characteristics are degrading spatially and temporally. The present study emphasizes the analysis of water quality parameters like temperature, pH, Dissolved Oxygen (DO), conductivity, Biological Oxygen Demand (BOD), nitrate, and faecal coliform concentration in the Godavari basin. This was achieved by analysis of data taken from the Central Pollution Control Board, India (CPCB) for 21 stations around the Godavari basin over a span of five years from 2015 to 2019. The Pearson Correlation coefficient for the water quality parameters was assessed to study the relationship among the parameters. Variation in the water quality parameter is observed from the graphs for each station for respective years. It was found that conductivity and DO, temperature and pH and DO and faecal coliform are negatively correlated. It was also observed that DO has a negative correlation with pH, BOD and faecal coliform, indicating the utilization of dissolved oxygen at higher rates due to increasing degradation of organic matter by aerobic microorganisms in the river. One-way ANOVA was applied to find out significant temporal variations and it was observed that temperature, pH, and faecal coliform level had significantly changed the overdue course of time (F(4, 115) = 2.451, p < 0.05). The obtained results from the analysis indicate that the selected water quality parameters have varied significantly spatially, whereas temporally, according to the ANOVA coefficient, only temperature, pH and faecal coliform had shown significant differences during the selected timeframe. Hence, the present study highlighted the deteriorating water quality of the Godavari River over time.

Combating the limitations of chemical approach, a Phyto-reflexive surface decorated ZnO nanoparticles were synthesis for enhanced activity against resistant infectious agent and toxic dyes. Flower-like ZnO nanostructure with average size of 30 nm and 25 nm using chemical method and Phyto-synthesised respectively. Prepared ZnO nano-flowers have been characterised by UV (UV–visible spectrometry), XRD (X-ray Diffraction), TEM (Transmission Electron Microscopy), HRTEM (High Resolution Transmission Electron Microscopy) and EDS (Energy Dispersive X-ray Spectroscopy). Anti-bacterial activity against Gram-positive Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa, exhibited 78%, 88% inhibition for chemical prepared ZnO NFs and Phyto-reflexive surface modified ZnO NFs exhibited 85%, 94% compared to Ciprofloxacin. MIC (Minimum Inhibitory Concentration) values against S. aureus and P. aeruginosa of biological ZnO NFs, were calculated as 62.5 and 125 ug/ml and 125 and 250 ug/ml for chemically synthesized ZnO NFs respectively. Anti-fungal activity against Aspergillus niger and Candida Albicans showed 78%, 80% activity with chemically ZnO NFs and 91%, 100% inhibition with biologically ZnO NFs. Anti-oxidant potential determination revealed 56.5% and 67.8% activity at 50 mg/mL with chemical and biological ZnO NF respectively. Furthermore, Degradation of methylene blue (MB) using ZnO NFs up to 78% using chemically prepared and 90% using Phyto-reflexive ZnO NFs. Thus, the comparative analysis concluded, Phyto-reflexive surface modified synthesis of ZnO NFs improved infections activity against pathogens and photocatalytic activity for hazardous chemicals.

Litchi’s post-harvest pericarp browning is one of the main constraints that drastically affect its visual attributes and market potential. Therefore, the vanillin-taurine Schiff base (VTSB) compound prepared from natural compounds of vanillin and taurine exhibited higher DPPH-radical-scavenging invitro antioxidant activity than vanillin. VTSB first-time report to mitigate the postharvest browning of litchi fruit. In this study, litchi fruits were dipped in 0.3 mM (based on pre-experiment) VTSB solution and stored at 25 ± 1 °C for six days to examine their effects on browning and postharvest quality. Fruit treated with VTSB had lower levels of browning degree (BD), browning index (BI), weight loss, soluble quinone (SQ), relative electrolyte leakage (REL), and malondialdehyde (MDA) than control fruit. Additionally, total anthocyanins and phenolic concentrations, Total soluble solids (TSS), and 2,2-diphenyl-1-picrylhydrazyl-free radical scavenging activity (DPPH-RSA) were preserved higher in VTSB-treated litchi fruit. The levels of Ascorbate peroxidase (APX), Superoxide dismutase (SOD), and Catalase (CAT) were higher in treated fruit, whereas polyphenol oxidase (PPO) and Peroxidase (POD) were decreased during the postharvest period. This study suggested that VTSB would be very useful for different post-harvest problems in the fruit and vegetable industry.

Weight-based fertigation scheduling strategies optimized for cucumber production in coco-peat grow bag under greenhouse conditions. The experiment was conducted using treatments comprised of four different levels of nutrient solution replenishment based on weight loss of growing bags along with plants, viz. full replenishment, 10% and 20% less replenishment and 20% more replenishment. Significantly, maximum cucumber yield (96.88–104.89 t/ha), number of fruits per plant (25–25.33) and yield per plant (2.42–2.62 kg/plant) were observed under full replenishment of nutrient solution against weight loss. It was also at par with treatment, which received 20% more nutrient solution as compared to full replenishment. The physiological attributes, viz. plant height (184 cm), number of nodes per plant (29.33), dry biomass and root parameters were observed higher in the full replenishment strategy which received 100% fertigation against the weight loss. Water use efficiency was found higher in the full replenishment followed by 20% less replenishment and lowest (811.38 kg/ha-mm) in 20% more replenishment of nutrient solution. Fertigation strategy which received the 100% nutrient solution against the weight loss, allowed the plant to grow fully with maximum yield and water use efficiency (WUE). Hence, 100% and more replenishment of nutrient solution against weight loss were found to be highly suitable strategies for controlling the fertigation scheduling through the weightbased sensing system.

Abstract ZnO nanoparticles are widely used in biological, chemical, and medical fields, but their toxicity impedes their wide application. In this study, pristine ZnO NPs (~ 7 nm; ~ 18 nm; ~ 49 nm) and lipid-coated ZnO NPs (~ 13 nm; ~ 22 nm; ~ 52 nm) with different morphologies were prepared by chemical method and characterized by TEM, XRD, HRTEM, FTIR, and DLS. Our results showed that the lipid-coated ZnO NPs (~ 13 nm; ~ 22 nm; ~ 52 nm) groups improved the colloidal stability, prevented the aggregation and dissolution of nanocrystal particles in the solution, inhibited the dissolution of ZnO NPs into Zn2+ cations, and reduced cytotoxicity more efficiently than the pristine ZnO NPs (~ 7 nm; ~ 18 nm; ~ 49 nm). Compared to the lipid-coated ZnO NPs, pristine ZnO NPs (~ 7 nm; ~ 18 nm; ~ 49 nm) could dose-dependently destroy the cells at low concentrations. At the same concentration, ZnO NPs (~ 7 nm) exhibited the highest cytotoxicity. These results could provide a basis for the toxicological study of the nanoparticles and direct future investigations for preventing strong aggregation, reducing the toxic effects of lipid-bilayer and promoting the uptake of nanoparticles by HeLa cells efficiently.

This study proposed to investigate the generation mechanism of raisins-derived volatile compounds during unsaturated fatty acids oxidation (UFAO) using a mixture of fatty acids (FAs) and four individual FA at different time intervals (0, 4, 8, 12, 16, and 20 days; 60 °C). During the sun-drying of ‘Thompson Seedless’ grapes (Vitis vinifera L.), a total of 39 UFAO-derived volatiles were characterized by the GC-MS. Firstly a pH value of 4.2 was optimized to proceed with a raisin drying-like UFAO model reaction. Afterward, GC-MS quantification revealed 45 UFAO-derived volatiles, and the maximum numbers of compounds were identified in the interaction of all FAs (39) following linoleic acid (29), erucic acid (27), oleic acid (25), and linolenic acid (27). Pentanoic acid, (E,E)-2,4-octadienal, and n-decanoic acid were only quantified in all FAs, linoleic acid, and erucic acid, respectively. This study showed that all FAs reactions were found to be responsible for the generation of a greater number of UFAO-derived volatiles with higher concentrations.

Protein corona composition and precise physiological understanding of differentially expressed proteins are key for identifying disease biomarkers. In this report, we presented a distinctive quantitative proteomics table of molecular cell signaling differentially expressed proteins of corona that formed on iron carbide nanoparticles (NPs). High-performance liquid chromatography/electrospray ionization coupled with ion trap mass analyzer (HPLC/ESI-Orbitrap) and MASCOT helped quantify 142 differentially expressed proteins. Among these proteins, 104 proteins showed upregulated behavior and 38 proteins were downregulated with respect to the control, whereas 48, 32 and 24 proteins were upregulated and 8, 9 and 21 were downregulated CW (control with unmodified NPs), CY (control with modified NPs) and WY (modified and unmodified NPs), respectively. These proteins were further categorized on behalf of their regularity, locality, molecular functionality and molecular masses using gene ontology (GO). A STRING analysis was used to target the specific range of proteins involved in metabolic pathways and molecular processing in different kinds of binding functionalities, such as RNA, DNA, ATP, ADP, GTP, GDP and calcium ion bindings. Thus, this study will help develop efficient protocols for the identification of latent biomarkers in early disease detection using protein fingerprints.

A study was conducted with the goal of developing an algorithm for use in sensors to monitor available soil N. For this purpose, three different soils were selected. The soils were studied for electrical conductivity (EC) at four different moisture levels and four levels of N. The selection of moisture levels was based on optimum moisture levels between tillage moisture and field capacity. The results revealed a significant relationship between electrical conductivity and moisture level of the soil as well as between electrical conductivity and soil N content. Based on these relations, a polynomial model was developed between the EC of each selected soil sample and moisture content as well as N levels. The regression model for moisture content-based EC determination had coefficients of determination of 0.985, 0.988, and 0.981 for clay loam, sandy loam, and sandy loam soils, respectively. Similarly, the regression model for N content-based EC determination had coefficients of determination of 0.9832, 0.9, and 0.99 for clay loam, sandy loam, and sandy loam soils, respectively. An algorithm developed using a polynomial relationship between the EC of each selected soil sample at all moisture and N levels can be used to develop a sensor for site-specific N application.

The experiment was conducted during 2013-14, 2014-15 and 2015-16 under naturally ventilated greenhouse condition at Centre for Protected Cultivation Technology (CPCT), ICAR-Indian Agricultural Research Institute (IARI), New Delhi. The capsicum (Capsicum annuum L.) variety California Wonder was planted under colored plastic mulches (silver, yellow and black) and non-mulched (control) condition in combination with three levels of irrigation, viz. 100%, 80%, and 60% ETc.. The yield of capsicum was observed significantly higher under silver mulch (63-71.6 t/ha) followed by yellow mulch (60.04-67.04 t/ha) at 100% ETc and silver mulch (59.72-70.8 t/ha) at 80% ETc for three consecutive years. Growth parameters were significantly affected by different combination of treatments. The highest and lowest plant height (149.9 cm and 56.5 cm), leaf area (1.98 m2/m2 and 1.09 m2/m2) and total dry matter (120.4 g and 57 g) were observed under silver mulch with 100% and non-mulched with 60% ETc respectively during all the three years of experiment. Highest growth parameters were at par with silver mulch with 80% ETc treatment. Significantly higher crop water productivity (43.30-36.53 kg/m3) in silver mulch with 80 % ETc treatment was observed compared to other combination of treatments. The results revealed that, capsicum cultivation under silver coloured plastic mulch in the naturally ventilated greenhouse not only saved irrigation water but also enhanced yield, crop growth and crop water productivity at reduced level of irrigation (80% ETc). Silver colour plastic mulch was found to be best suitable for growing capsicum crop inside the naturally ventilated greenhouse.

The management of water resources is a priority problem in agriculture, especially in areas with a limited water supply. The determination of crop water requirements and crop coefficient (Kc) of agricultural crops helps to create an appropriate irrigation schedule for the effective management of irrigation water. A portable smart weighing lysimeter (1000 × 1000 mm and 600 mm depth) was developed at CPCT, IARI, New Delhi for real-time measurement of Crop Coefficient (Kc) and water requirement of chrysanthemum crop and bulk data storage. The paper discusses the assembly, structural and operational design of the portable smart weighting lysimeter. The performance characteristics of the developed lysimeter were evaluated under different load conditions. The Kc values of the chrysanthemum crop obtained from the lysimeter installed inside the greenhouse were Kc ini. 0.43 and 0.38, Kc mid-1.27 and 1.25, and Kc end-0.67 and 0.59 for the years 2019–2020 and 2020–2021, respectively, which apprehensively corroborated with the FAO 56 paper for determination of crop coefficient. The Kc values decreased progressively at the late-season stage because of the maturity and aging of the leaves. The lysimeter’s edge temperature was somewhat higher, whereas the center temperature closely matched the field temperature. The temperature difference between the center and the edge increased as the ambient temperature rose. The developed smart lysimeter system has unique applications due to its real-time measurement, portable attribute, and ability to produce accurate results for determining crop water use and crop coefficient for greenhouse chrysanthemum crops.

The many hydrodynamic implications associated with the geomorphological evolution of braided rivers are still not profoundly examined in both experimental and numerical analyses, due to the generation of three-dimensional turbulence structures around sediment bars. In this experimental research, the 3D velocity fields were measured through an acoustic Doppler velocimeter during flume-scale laboratory experimental runs over an emerging sand bar model, to reproduce the hydrodynamic conditions of real braided rivers, and the 3D Turbulent Kinetic Energy (TKE) components were analyzed and discussed here in detail. Given the three-dimensionality of the examined water flow in the proximity of the experimental bar, the statistical analysis of the octagonal bursting events was applied to analyze and discuss the different flume-scale 3D turbulence structures. The main novelty of this study is the proposal of the 3D Hole Size (3DHS) analysis, used for separating the extreme events observed in the experimental runs from the low-intensity events.

The shortage of natural aggregates has compelled the developers to devote their efforts to finding alternative aggregates. On the other hand, demolition waste from old constructions creates huge land acquisition problems and environmental pollution. Both these problems can be solved by recycling waste materials. The current study aims to use recycled brick aggregates (RBA) to develop eco-friendly pervious concrete (PC) and investigate the new concrete’s structural performance and pore structure distributions. Through laboratory testing and image processing techniques, the effects of replacement ratio (0%, 20%, 40%, 60%, 80%, and 100%) and particle size (4.75 mm, 9.5 mm, and 12.5 mm) on both structural performance and pore feature were analyzed. The obtained results showed that the smallest aggregate size (size = 4.75 mm) provides the best strength compared to the large sizes. The image analysis method has shown the average pore sizes of PC mixes made with smaller aggregates (size = 4.75 mm) as 1.8–2 mm, whereas the mixes prepared with an aggregate size of 9.5 mm and 12.5 mm can provide pore sizes of 2.9–3.1 mm and 3.7–4.2 mm, respectively. In summary, the results confirmed that 40–60% of the natural aggregates could be replaced with RBA without influencing both strength and pore features.

The synthesis methodology, particle size and shape, dose optimization, and toxicity studies of nano-fertilizers are vital prior to their field application. This study investigates the comparative response of chemically synthesized and biologically synthesized iron oxide nanorods (NRs) using moringa olefera along with bulk FeCl3 on summer maize (Zea mays). It is found that FeCl3 salt and chemically synthesized iron oxides NRs caused growth retardation and impaired plant physiological and anti-oxidative activities at a concentration higher than 25 mg/L due to toxicity by over accumulation. While iron released form biologically synthesized NRs have shown significantly positive results even at 50 mg/L due to their low toxicity, an improved leaf area (13%), number of leaves per plant (26%), total chlorophyll content (80%) and nitrate content (6%) with biologically synthesized NRs are obtained. Moreover, the plant anti-oxidative activity also increased on treatment with biologically synthesized NRs because of their ability to form a complex with metal ions. These findings suggest that biologically synthesized iron oxides NRs are an efficient iron source and can last for a long time. Thus, proving that nanofertilizer are required to have specific surface chemistry to release the nutrient in an appropriate concentration for better plant growth.

Increasing infrastructure growth has forced the construction industry to look for wasteful, cheap, and suitable materials for construction. An investigation into the geotechnical utilization of fly ash was carried out in the present study. Practical applications normally involve the use of large quantities of fly ash, so proper mixing of the fly ash with other materials may not be significantly achieved. Therefore, the present paper investigates the behaviour of a fly ash–bentonite layered system with different ratios. The physical properties and chemical composition of fly ash and bentonite were determined. SEM and energy dispersive X-ray experiments were also used to investigate the morphology and phase compositions of fly ash and bentonite. A series of consolidated undrained (CU) triaxial tests on fly ash–bentonite were carried out to investigate shear strength characteristics. Fly ash (F) and bentonite (B) were used in the following ratios: 1:1 (50% F:50% B), 2:1 (67% F:33% B), 3:1 (75% F:25% B), and 4:1 (80% F:20% B), with different numbers of interfaces (N), i.e., 1, 2, and 3 for each ratio. The deviator stress and cohesion value were found to increase with the number of interfaces for each ratio. The angle of shear resistance changed marginally with the increase in the fly ash–bentonite ratios and varying interfaces.