Search

This research investigates the tribological characteristics of SS316L produced through Laser Powder Bed Fusion (LPBF), emphasizing the influence of testing temperature, sliding velocity, and loading conditions. The findings demonstrate that the friction coefficient escalates with increased temperatures (150°C and 250°C), whereas the wear rate remains invariant, presumably attributable to the establishment of a lubricating surface layer. The rotational velocity of 300 revolutions per minute the Coefficient of Friction (COF) shown an upward movement although the wear rate remains constant. The findings underscore the importance of analyzing different parameters to understand the friction and wear properties of additively manufactured SS316L. [ABSTRACT FROM AUTHOR]

Nowadays, research has shown the emergence of the 3D printing method for printing a functionalized component. Graphene nanomaterial has an enormous conducting property that can compete with conducting materials like copper and silicon. This paper describes the electrical conductivity investigation of 3D-printed graphene nanomaterial in extrusion-based 3D printing methods. In extrusion, two different approaches of the 3D printing method were used to print the graphene-based structure: the fused deposition modeling (FDM) method and the direct ink writing (DIW) method. Both printing methods follow the two printing processes and select material forms. Selection of testing was made to analyze the characterization variations in the printed material, such as XRD, TGA, viscosity, Raman shift, and Scanning Electron Microscopy analyses, which shows the changes of effect in the conductivity due to various parameter differences in both the printing methods. A four-point probe technique was used to analyze the electrical conductivity of the two different methods. These analysis results prove that the characterization variations differ in the FDM and DIW printed models. [ABSTRACT FROM AUTHOR]

Fiber-reinforced additive manufacturing components have been used in various industrial applications in recent years, including in the production of aerospace, automobile, and biomedical components. Compared to conventional methods, additive manufacturing (AM) methods can be used to obtainin lighter parts with superior mechanical properties with lower setup costs and the ability to design more complex parts. Additionally, the fabrication of onyx composites using the conventional method can result in delamination, which is a significant issue during composite machining. To address these shortcomings, the fabrication of onyx composites via additive manufacturing with the Mark forged 3D-composite printer was considered. Machinability tests were conducted using abrasive water jet machining (AWJM) with various drilling diameters, traverse speeds, and abrasive mass flow rates. These parameters were optimized using Taguchi analysis and then validated using the Genetic algorithm (GA) and the Moth Flame Optimization algorithm (MFO). The surface morphology (Dmax) and the roughness of the drilled holes were determined using a vision measuring machine with 2D software (MITUTOYO v5.0) and a contact-type surface roughness tester. Confirmation testing demonstrated that the predicted values werenearly identical to the experimental standards. During the drilling of an onyx polymer composite, regression models, genetic algorithms and the Moth-Flame Optimization algorithm were used to estimate the response surface of delamination damage and surface roughness. [ABSTRACT FROM AUTHOR]

Plant fibers over the years have succeeded in generating interest among researchers about their use. This is mainly due to several ecological legislations put in place by nations to counter the rise in global warming levels. Although plant fiber-based polymer composites are penetrating various domains, concern regarding their suitability and challenges related to manufacturing techniques needs to be addressed. This review attempts to discuss various aspects of plant fibers, their processing with polymer, and methods to improve the fib-matrix interaction. The article also presents an insight into different 3D printing techniques such as fused deposition modeling, laminated object manufacturing, stereolithography, selective laser sintering, and inkjet printer for processing fiber-based polymer composites. The use of technologically advanced 4D printing of fiber-polymer composites is also discussed. Challenges and futuristic opportunities associated with recent works on 3D printing techniques are analyzed toward the end. The paper is structured in the following manner: the first part focuses on natural fibers with their constituents, their processing, and manufacturing techniques with polymers, while the second part of the paper discusses various 3D printing techniques with their challenges and opportunities. [ABSTRACT FROM AUTHOR]