Search

The rise in greenhouse gases, particularly carbon dioxide (CO2) emissions, in the atmosphere is one of the major causes of global warming and climate change. The production of ordinary Portland cement (OPC) emits harmful CO2 gases, which contribute to sporadic heatwaves, rapid melting of glaciers, flash flooding, and food shortages. To address global warming and climate change challenges, this research study explores the use of a cement-less recycled aggregate concrete, a sustainable approach for future constructions. This study uses fly ash, an industrial waste of coal power plants, as a 100% substitute for OPC. Moreover, this research study also uses recycled coarse aggregates (RCAs) as a partial to complete replacement for natural coarse aggregates (NCAs) to preserve natural resources for future generations. In this research investigation, a total of 60 pull-out specimens were prepared to investigate the influence of steel bar diameter (9.5 mm, 12.7 mm, and 19.1 mm), bar embedment length, d b (4 d b and 6 d b ), and percentage replacements of NCA with RCA (25%, 50%, 75%, and 100%) on the bond stress behavior of cement-less RA concrete. The test results exhibited that the bond stress of cement-less RCA concrete decreased by 6% with increasing steel bar diameter. Moreover, the bond stress decreased by 5.5% with increasing bar embedment length. Furthermore, the bond stress decreased by 7.6%, 7%, 8.8%, and 20.4%, respectively, with increasing percentage replacements (25%, 50%, 75%, and 100%) of NCA with RCA. An empirical model was developed correlating the bond strength to the mean compressive strength of cement-less RCA concrete, which matched well with the experimental test results and predictions of the CEB-FIP model for OPC. The CRAC mixes exhibited higher costs but significantly lower embodied CO2 emissions than OPC concrete. [ABSTRACT FROM AUTHOR]

The construction industry strongly relies on concrete and clay bricks for various applications. The escalating demand for these materials, driven by rapid population growth, has led to resource depletion and increased construction and demolition waste (CDW). Recycling CDW into construction materials, particularly in the form of recycled concrete aggregates (RCAs) and recycled brick aggregates (RBAs), has emerged as a promising solution. This study deals with the structural performance of concrete incorporating RCAs and RBAs. The experimental program encompasses material characterization, concrete mix design, and several tests to assess density, compressive strength, bond behavior, and flexural properties. The results indicate that the replacement of fine natural aggregate (NA) with fine RCAs or RBAs has a negligible impact on density, while the partial replacement of coarse NAs with RAs yields modest reductions in compressive strength. Notably, the bond strength between steel rebar and concrete is influenced by the type and content of RA, with specimens containing RCAs exhibiting a higher bond strength than those with RBAs. Empirical models used to predict bond strength generally align with experimental results, with conservative predictions by some models, such as ACI 318, and overestimation by others, such as models proposed by AS-3600 and CEB-FIB. The flexural tests of beams highlight the variation in stiffness and load-bearing capacity with the proportion of NAs replaced by RAs. While beams with 50% NA replacement demonstrate comparable performance to control beams, those with 100% RA replacement exhibit lower cracking and yielding stiffness. Cracking patterns in beams with RAs differ from control beams, with RA-containing beams showing more cracks and an altered crack distribution. The findings underscore the feasibility of using recycled aggregates in construction, with partial NA replacement offering a balance between sustainable material usage and desired structural properties. [ABSTRACT FROM AUTHOR]