Search

The anesthetic effect of Alpinia galanga oil (AGO) has been reported. However, knowledge of its pathway in mammals is limited. In the present study, the binding of AGO and its key compounds, methyl eugenol, 1,8-cineole, and 4-allylphenyl acetate, to gamma-aminobutyric acid type A (GABA(A)) receptors in rat cortical membranes, was investigated using a [H-3]muscimol binding assay and an in silico modeling platform. The results showed that only AGO and methyl eugenol displayed a positive modulation at the highest concentrations, whereas 1,8-cineole and 4-allylphenyl acetate were inactive. The result of AGO correlated well to the amount of methyl eugenol in AGO. Computational docking and dynamics simulations into the GABA(A) receptor complex model (PDB: 6X3T) showed the stable structure of the GABA(A) receptor-methyl eugenol complex with the lowest binding energy of -22.16 kcal/mol. This result shows that the anesthetic activity of AGO and methyl eugenol in mammals is associated with GABA(A) receptor modulation. An oil-in-water nanoemulsion containing 20% w/w AGO (NE-AGO) was formulated. NE-AGO showed a significant increase in specific [H-3]muscimol binding, to 179% of the control, with an EC50 of 391 mu g/mL. Intracellular studies show that normal human cells are highly tolerant to AGO and the nanoemulsion, indicating that NE-AGO may be useful for human anesthesia.

[EN] In vitro digestion studies often use animal digestive enzyme extracts as substitutes of human gastric and pancreatic secretions. Pancreatin from porcine origin is thus commonly used to provide relevant pancreatic enzymes such as proteases, amylase and lipase. Rabbit gastric extracts (RGE) have been recently introduced to provide gastric lipase in addition to pepsin. Before preparing simulated gastric and pancreatic extracts with targeted enzyme activities as described in in vitro digestion protocols, it is important to determine the activities of enzyme preparations using validated methods. The purpose of this inter-laboratory study within the INFOGEST network was to test the repeatability and reproducibility of lipase assays using the pH-stat technique for measuring the activities of gastric and pancreatic lipases from various sources. Twenty-one laboratories having different pH-stat devices received the same protocol with identical batches of RGE and two pancreatin sources. Lipase assays were performed using tributyrin as a substrate and three different amounts (50, 100 and 200 mu g) of each enzyme preparation. The repeatability results within individual laboratories were satisfactory with coefficients of variation (CVs) ranging from 4 to 8% regardless of the enzyme amount tested. However, the inter laboratory variability was high (CV > 15%) compared to existing standards for bioanalytical assays. We identified and weighted the contributions to inter-laboratory variability of several parameters associated with the various pH-stat equipment used in this study (e.g. reaction vessel volume and shape, stirring mode and rate, burette volume for the automated delivery of sodium hydroxide). Based on this, we established recommendations for improving the reproducibility of lipase assays using the pH-stat technique. Defining accurate and complete recommendations on how to correctly quantify activity levels of enzyme preparations is a gateway to promising comparison of

Microcontainers, which are microfabricated cylindrical devices with a reservoir function, have shown promise as an oral drug delivery system for small molecular drug compounds. However, they have never been evaluated against a relevant control formulation. In the current study, we prepared microcrystalline cellulose (MCC) microspheres as a control for in vitro and in vivo testing of SU-8 microcontainers as an oral drug delivery system. Both dosage forms were loaded with paracetamol and coated with chitosan or polyethylene glycol (PEG) (12 kDa). These coatings were followed by an additional enteric coating of Eudragit (R) S100. In addition, a control dosage form was coated with Eudragit (R) alone. The dosage forms were evaluated in vitro, in a physiologically relevant two-step model simulating rat gastrointestinal fluids, and in vivo by oral administration to rats. In vitro, the microcontainers coated with PEG/Eudragit (R) resulted in a prolonged release of paracetamol compared to the respective microspheres, which was consistent with in vivo observations of a later time (T-max) for maximum plasma concentration (C-max) for the microcontainers. For microspheres and microcontainers coated with chitosan/Eudragit (R), the time for complete in vitro release of paracetamol was very similar, due to an earlier release from the microcontainers. This trend was supported by very similar T-max values in vivo. The in vitro in vivo relation was confirmed by a linear regression with R-2 = 0.9, when T-max for each dosage form was plotted as a function of time for 90% paracetamol release in vitro. From the in vivo study, the average plasma concentration of paracetamol 120 min after dosing was significantly higher for microcontainers than for microspheres (0.3 +/- 0.1 mu g/mL and 0.1 +

Eleven simulated intestinal fluids (SIF) were designed using a Design of Experiment (DoE) approach. The DoE SIF covered a range of compositions of fasted state human intestinal fluid (FaHIF) with regard to pH, bile salt (BS), and phospholipid (PL). Using the model compound danazol, the apparent crystalline solubility (aCS) and apparent amorphous solubility (aAS), as well as the supersaturation propensity was determined in the DoE SIF media. The aCS of danazol was dependent on the composition of the SIF, with PL as the main factor, and a small effect from BS and an interaction between BS and PL. From the DoE solubility data a model was derived, which could predict aCS in commercially available SIF (FaSSIF-V1 and -V2) and in a range of FaHIF. The aAS of danazol was differently affected by the SIF composition than the aCS; PL was again the main factor influencing the aAS, but interactions between BS and pH, as well as pH and PL were also important. The supersaturation propensities of danazol in the DoE SIF media were affected by the same factors as the aCS. Hence, the supersaturation behaviour and aCS of danazol, were found to be closely related.

To increase the understanding of how drugs behave following oral administration to the pediatric population, the aim of the present study was to investigate the solubilization of fluconazole and ibuprofen during simulated gastro-intestinal (GI) digestion, using an immediate transfer model mimicking pediatric GI digestion. The effects of infant formula and digestion, on the drug solubilization, were studied using simulated fasted and fed state digestion media in the presence and absence of digestive enzymes. Additionally, the effect of digestion media viscosity on the solubilization process was investigated. It was found that the solubilization of fluconazole was unaffected by all tested parameters, as the entire estimated dose equivalent was solubilized in the aqueous phase throughout all digestion studies. In contrast, the solubilization of ibuprofen was affected by all the tested parameters, i.e. in the fasted state, the solubilization of ibuprofen was limited by its solubility in the aqueous phase of the simulated GI digestion media, whereas the solubilization in the fed state was affected by drug partitioning between the lipid and the aqueous phases, and therefore by the digestion of the lipid phase. Adding Nestle ' Thicken UpTM, containing xanthan gum as a thickening agent, to the digestion medium increased its viscosity, which in turn resulted in a reduced initial digestion rate, increased pH fluctuations, as well as high variability in all drug solubilization data as evident in large standard deviations. Furthermore, the increased digestion medium viscosity decreased the drug recovery from the combined pellet and aqueous phase. The observed viscosity effects might translate into a more variable and lower oral bioavailability.

Although oral drug delivery is the preferred administration route and has been used for centuries, modern drug discovery and development pipelines challenge conventional formulation approaches and highlight the insufficient mechanistic understanding of processes critical to oral drug absorption. This review presents the opinion of UNGAP scientists on four key themes across the oral absorption landscape: (1) specific patient populations, (2) regional differences in the gastrointestinal tract, (3) advanced formulations and (4) food-drug interactions. The differences of oral absorption in pediatric and geriatric populations, the specific issues in colonic absorption, the formulation approaches for poorly water-soluble (small molecules) and poorly permeable (peptides, RNA etc.) drugs, as well as the vast realm of food effects, are some of the topics discussed in detail. The identified controversies and gaps in the current understanding of gastrointestinal absorption-related processes are used to create a roadmap for the future of oral drug absorption research.(c) 2021 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).

The aim of this study was to design an in vitro lipolysis-permeation method to estimate drug absorption following the oral administration of self-nanoemulsifying drug delivery systems (SNEDDSs). The method was evaluated by testing five oral formulations containing cinnarizine (four SNEDDSs and one aqueous suspension) from a previously published pharmacokinetic study in rats. In that study, the pharmacokinetic profiles of the five formulations did not correlate with the drug solubilization profiles obtained during in vitro intestinal lipolysis. Using the designed lipolysis-permeation method, in vitro lipolysis of the five formulations was followed by in vitro drug permeation in Franz diffusion cells equipped with PermeaPad(R) barriers. A linear in vivo-in vitro correlation was obtained when comparing the area under the in vitro drug permeation-time curve (AUC(0-3h)), to the AUC(0-3h) of the plasma concentration-time profile obtained from the in vivo study. Based on these results, the evaluated lipolysis-permeation method was found to be a promising tool for estimating the in vivo performance of SNEDDSs, but more studies are needed to evaluate the method further.

Oligonucleotides (OND) represent a promising therapeutic approach. However, their instability and low intestinal permeability hamper oral bioavailability. Well-established for oral delivery, self-emulsifying drug delivery systems (SEDDS) can overcome the weakness of other delivery systems such as long-term instability of nanoparticles or complicated formulation processes. Therefore, the present study aims to prepare SEDDS for delivery of a nonspecific fluorescently labeled OND across the intestinal Caco-2 monolayer. The hydrophobic ion pairing of an OND and a cationic lipid served as an effective hydrophobization method using either dimethyldioctadecylammonium bromide (DDAB) or 1,2-dioleoyl-3-trimethylammonium propane (DOTAP). This strategy allowed a successful loading of OND-cationic lipid complexes into both negatively charged and neutral SEDDS. Subjecting both complex-loaded SEDDS to a nuclease, the negatively charged SEDDS protected about 16% of the complexed OND in contrast to 58% protected by its neutral counterpart. Furthermore, both SEDDS containing permeation-enhancing excipients facilitated delivery of OND across the intestinal Caco-2 cell monolayer. The negatively charged SEDDS showed a more stable permeability profile over 120 min, with a permeability of about 2 x 10(-7) cm/s, unlike neutral SEDDS, which displayed an increasing permeability reaching up to 7 x 10(-7) cm/s. In conclusion, these novel SEDDS-based formulations provide a promising tool for OND protection and delivery across the Caco-2 cell monolayer.

Clinical use of 4-Allylpyrocatechol (APC), a potential antifungal agent from Piper betle, is limited because of its low water solubility. The current study explores the development of the self-nanoemulsifying drug delivery system (SNEDDS) containing APC (APC-SNEDDS) to enhance APC solubility. Results demonstrated that excipient type and concentration played an important role in the solubility of APC in the obtained SNEEDS. SNEDDS, comprising 20% Miglyol 812N, 30% Maisine 35-1, 40% Kolliphor RH40, and 10% absolute ethanol, provided the highest loading capacity and significantly increased water solubility of APC. Oil-in-water nanoemulsions (NE) with droplet sizes of less than 40 nm and a narrow size distribution were obtained after dispersing this APC-SNEDDS in water. The droplets had a negative zeta potential between -10 and -20 mV. The release kinetics of APC from APC-SNEDDS followed the Higuchi model. The NE containing 1.6 mg APC/mL had effective activity against Candida albicans with dose-dependent killing kinetics and was nontoxic to normal cells. The antifungal potential was similar to that of 1 mg nystatin/mL. These findings suggest that APC-SNEDDS are a useful system to enhance the apparent water solubility of APC and are a promising system for clinical treatment of oral infection caused by C. albicans.

Self-nanoemulsifying drug delivery system (SNEDDS) is an efficient system for delivering water-insoluble compounds. The aim of this study was to develop SNEDDS containing clove oil (C-SNEDDS) to increase clove oil aqueous miscibility and for fish anesthesia. C-SNEDDS was prepared using different lipids and surfactants. An axial extended design was used to select suitable components. The effects of components on dispersing time, droplet size, and size distribution of the dispersed C-SNEDDS were investigated. D-optimal experimental design, multiple linear regression, and partial least squares regression were employed to optimize the formulation variables, X1 (clove oil), X2 (lipid), and X3 (surfactant) for preparing high clove oil loading C-SNEDDS. Clove oil and surfactant showed a significant effect on the droplet size. Spherical droplets could be observed under cryogenic transmission electron microscopy from the small-size dispersed C-SNEDDS. C-SNEDDS using 1:1 ratio of Captex-Capmul and Kolliphor EL showed high clove oil loading of 35–36%. The droplet size demonstrated a high impact on the induction time to anesthesia but not on the recovery time. The dispersed C-SNEDDS with an average droplet size of 58.2 ± 0.9 nm significantly showed a fast induction time of approximately 2.5 min, 2-fold significantly faster than MS-222.

Exosome selectivity mechanisms underlying exosome-target cell interactions and the specific traits affecting their capability to communicate still remain unclear. Moreover, the capacity of exosomes to efficiently deliver their molecular cargos intracellularly needs precise investigation towards establishing functional exosome-based delivery platforms exploitable in the clinical practice. The current study focuses on: (a) exosome production from normal MRC-5 and Vero cells growing in culture, (b) physicochemical characterization by dynamic light scattering (DLS) and cryo-transmission electron microscopy; (c) cellular uptake studies of rhodamine-labeled exosomes in normal and cancer cells, providing to exosomes either "autologous" or "heterologous" cellular delivery environments; and (d) loading exogenous Alexa Fluor 488-labeled siRNA into exosomes for the assessment of their delivering capacity by immunofluorescence in a panel of recipient cells. The data obtained thus far indicate that MRC-5 and Vero exosomes, indeed exhibit an interesting delivering profile, as promising "bio-shuttles," being pharmacologically exploitable in the context of theranostic applications.

Intake of probiotics is associated with many health benefits, which has generated an interest in formulating viable probiotic supplements. The present study had two aims. The first aim was to achieve gastrointestinal protection and delayed release of viable probiotics by pelletizing and coating freeze-dried probiotic strains, using riboflavin as a marker for release. The second aim was to set up a dynamic three-step in vitro model simulating the conditions in the human gastric, duodenum/jejunum and ileum compartments using physiologically relevant media to evaluate delayed release of the formulations. To simulate lowered bile acid concentrations in the ileum area of the gastrointestinal tract, a novel method using the bile acid sequestrant cholestyramine to lower bile acid concentrations in the small intestinal medium to physiologically relevant levels was attempted. Granulation, extrusion and spheronization was used to develop pellets containing viable probiotics using freeze-dried Lactobacullus reuteri as a model strain. Fluid bed coating the pellets with the pH-sensitive polymers Eudragit S100 or Eudragit FS30D resulted in targeted release in the ileum step of the three-step in vitro model based on release of the marker riboflavin.

Lipid based drug delivery systems (LbDDSs) present an effective solution for increasing the apparent solubility and eliminating the slow dissolution process of many poorly water-soluble compounds. Typically, an initial step in designing a LbDDS is to measure the equilibrium solubility of the compound in various LbDDS excipients, which often are viscous. Equilibrium solubility is usually measured by the classical saturation shake-flask (SSF) method with centrifugation for phase separation. The concentration of the compound in the supernatant is determined as the solubility. As complete phase separation is necessary to determine the equilibrium solubility, but difficult to achieve in viscous solvents, the aim of the present study was to evaluate the effect of centrifugation speed on the measured solubility.In the present study, the solubility of seven poorly water-soluble compounds: amphotericin B, nystatin, beta-carotene, curcumin, itraconazole, cinnarizine and fenofibrate was measured in five viscous solvents using the SSF method. For five out of the seven compounds (amphotericin B, nystatin, beta-carotene, curcumin and itraconazole) the centrifugation speed had a significant effect on the measured solubility, i.e. different centrifugation speeds led to differences in the measured solubility. The supernatants of all the tested samples, following 15 min of centrifugation at 900 x g (3K RPM), 4.7K x g (7K RPM) and 17K x g (13.3K RPM), were evaluated for particle presence by polarized light microscopy. Presence of particles in the supernatants of the five affected compounds indicated that complete phase separation was not obtained, and that the measured solubility did not represent the true equilibrium solubility. Studying the physicochemical properties of the tested compounds, it was found, that the compounds, for which the measured solubility was affected by the centrifugation speed, all display high melting points. In conclusion, to avoid overestimating th

Drug release from a lipid-based drug delivery system (LbDDS) is typically studied in vitro using a one-step intestinal digestion model. However, lately the importance of incorporating gastric digestion has been stressed. The aim of the present study was to compare a two-step gastro-intestinal (GI) in vitro digestion model to the commonly used one-step intestinal digestion model. The models were evaluated by studying release of the model drug A1260 from two LbDDSs (F-I and F-II), for which in vivo pharmacokinetic data from oral administration to beagle dogs were available. The amount of A1260 recovered in the aqueous phases during and after the GI digestion of F-I and F-II was related to the Cmax and AUC0- 48h of the plasma concentration-time profiles of each formulation and produced a rank order in vitroin vivo (IVIV) relation. In comparison, a similar IVIV rank ordering was obtained when relating the amount of A1260 recovered in the aqueous phase prior (t = 0 min), and following 15 min of intestinal digestion, to the plasma concentration-time profiles. However, after 60 min of intestinal digestion, the LbDDSs performed equally in the one-step in vitro digestion model, contrary to what was observed in the two-step digestion model, and in vivo. As the GI digestion model produced a clearer distinction in terms of LbDDS rank ordering of the two LbDDSs, compared to the intestinal digestion model, it was found to be a promising in vitro model to study and estimate the LbDDS behavior in vivo.

Carbamide peroxide (CP) possesses a strong tooth bleaching activity, however, its clinical application is limited because of its instability in aqueous formulations. This study explores the improvement of CP stability and bleaching activity by loading CP in electrospun nanofibrous film (ENF). Polyvinylalcohol, polyvinylpyrrolidone, and silica were used as components for core-based nanofibers of ENF. Electrospinning feed aqueous solutions (EFASs) were developed for preparing CP loaded ENF (CP-ENF). Stability of CP in EFASs is significantly higher than in pure water. The highest stability of CP is found in PPS-CP3, composed of 0.5% CP, 5.5% polyvinylalcohol, 3% polyvinylpyrrolidone, and 1% silica. The results from X-ray diffraction indicate that CP is dispersed as a non-crystalline form in CP-ENFs. CP and the compositions of EFASs play a major role on characteristics and bleaching efficiency of CP-ENFs. Drug release of CP-ENFs is the first order kinetics. CP-ENF obtained from PPS-CP3 shows the highest drug entrapment efficiency, high adhesion, and suitable sustained release. Drug release mechanism is along with anomalous transport according to Korsmeyer-Peppas model. In an ex vivo study using human teeth, it shows the highest bleaching efficiency among the others. Therefore, CP-ENF obtained from PPS-CP3 is a promising ENF for clinical use.

Decision-making in drug development benefits from an integrated systems approach, where the stakeholders identify and address the critical questions for the system through carefully designed and performed studies. Biopharmaceutics Risk Assessment Roadmap (BioRAM) is such a systems approach for application of systems thinking to patient focused and timely decision-making, suitable for all stages of drug discovery and development. We described the BioRAM therapy-driven drug delivery framework, strategic roadmap, and integrated risk assessment instrument (BioRAM Scoring Grid) in previous publications (J Pharm Sci 103:3377-97, 2014; J Pharm Sci 105:3243-55, 2016). Integration of systems thinking with pharmaceutical development, manufacturing, and clinical sciences and health care is unique to BioRAM where the developed strategy identifies the system and enables risk characterization and balancing for the entire system. Successful decision-making process in BioRAM starts with the Blueprint (BP) meetings. Through shared understanding of the system, the program strategy is developed and captured in the program BP. Here, we provide three semi-hypothetical examples for illustrating risk-based decision-making in high and moderate risk settings. In the high-risk setting, which is a rare disease area, two completely alternate development approaches are considered (gene therapy and small molecule). The two moderate-risk examples represent varied knowledge levels and drivers for the programs. In one moderate-risk example, knowledge leveraging opportunities are drawn from the manufacturing knowledge and clinical performance of a similar drug substance. In the other example, knowledge on acute tolerance patterns for a similar mechanistic pathway is utilized for identifying markers to inform the drug release profile from the dosage form with the necessary "flexibility" for dosing. All examples illustrate implementation of the BioRAM strategy for leveraging knowledge and decision

In the current study, a self-nanoemulsifying drug delivery system (SNEDDS) containing N-trimethyl chitosan chloride (TMC) was developed and evaluated for its potential to deliver amphotericin B (AmpB) via the gastrointestinal tract. SNEDDS comprising Captex 355, Kolliphor RH40 and Propylene Glycol were optimized and characterized for their formation spontaneity, droplet size and drug loading. Investigations on the effects of the application SNEDDS containing TMC to a model intestinal epithelium (Caco-2 monolayer) indicated the capability of the formulations to induce the transient opening of tight junctions. Caco-2 cell viability studies confirmed the safety of the SNEDDS, whereas in vitro transport studies of AmpB through Caco-2 cell monolayers showed the permeation enhancing ability of TMC. Our results suggest that chitosan derivative TMC combined with a SNEDDS may be used as permeation enhancer to facilitate oral delivery of AmpB.

Objective To test whether a side-by-side diffusion model is suitable for studying drug supersaturation in an absorptive environment. Methods The µD/P model and the µFLUX model, using a Caco-2 cell monolayer/PAMPA membrane as the permeation barrier, respectively, were compared in terms of robustness and ease of handling, while studying the drug supersaturation–precipitation–permeation interplay. Continuing with the best model, the impact of the acceptor media and the importance of studying drug supersaturation in a combined dissolution–permeation model, as compared to a simple dissolution model, were evaluated. Key findings The two models produced similar results in terms of supersaturation, precipitation and permeation. The µFLUX model was considered more robust and easier to handle based on its cell-free permeation system. Using the µFLUX model, it was found that an acceptor medium with a high surfactant concentration increased the amount of permeated drug. The effect of absorption on drug supersaturation was found to be dependent on the drug, and the tested level of supersaturation. Conclusion The tested models were comparable; however, Caco-2 cell monolayers were considered too sensitive to be used to study drug supersaturation. Further studies are needed to evaluate the observed drug-dependent effects of absorption on drug supersaturation.

Enhancing the oral bioavailability of peptides has received a lot of attention for decades but remains challenging, partly due to low intestinal membrane permeability. Combining a permeation enhancer (PE) with unidirectionally releasing microcontainers (MCs) has previously been shown to increase insulin permeation across Caco-2 cell monolayers. In the present work, this setup was further employed to compare three common PEs—sodium caprate (C10), sodium dodecyl sulfate (SDS), and lauroyl carnitine. The concept was also studied using porcine intestinal tissue with the inclusion of 70 kDa fluorescein isothiocyanate-dextran (FD70) as a pathogen marker. Moreover, a combined proteolysis and Caco-2 cell permeation setup was developed to investigate the effect of soybean trypsin inhibitor (STI) in the MCs. Lastly, in vivo performance of the MCs was tested in an oral gavage study in rats by monitoring blood glucose and insulin absorption. SDS proved to be the most potent PE without increasing the ex vivo uptake of FD70, while the implementation of STI further improved insulin permeation in the combined proteolysis Caco-2 cell setup. However, no insulin absorption in rats was observed upon oral gavage of MCs loaded with insulin, PE and STI. Post-mortem microscopic examination of their gastrointestinal tract indicated lack of intestinal retention and optimal orientation by the MCs, possibly precluding the potential advantage of unidirectional release.

Intrinsic dissolution rate (IDR) is the surface specific dissolution rate of a drug. In early drug development, this property (among other parameters) is measured in order to compare different polymorphs and salt forms, guide formulation decisions, and to provide a quality marker of the active pharmaceutical ingredient (API) during production. In this review, an update on different methods and small-scale techniques that have recently evolved for determination of IDR is provided. The importance of biorelevant media and the hydrodynamic conditions of dissolution are also discussed. Different preparation techniques for samples are presented with a focus on disc, particle- and crystal-based methods. A number of small-scale techniques are then described in detail, and their applicability domains are identified. Finally, an updated industrial perspective is provided about IDR's place in the early drug development process.

The increasing number of poorly water-soluble drug candidates in pharmaceutical development is a major challenge. Enabling techniques such as amorphization of the crystalline drug can result in supersaturation with respect to the thermodynamically most stable form of the drug, thereby possibly increasing its bioavailability after oral administration. The ease with which such crystalline drugs can be amorphized is known as their glass forming ability (GFA) and is commonly described by the critical cooling rate. In this study, the supersaturation potential, i.e., the maximum apparent degree of supersaturation, of poor and good glass formers is investigated in the absence or presence of either hypromellose acetate succinate L-grade (HPMCAS-L) or vinylpyrrolidine-vinyl acetate copolymer (PVPVA64) in fasted state simulated intestinal fluid (FaSSIF). The GFA of cinnarizine, itraconazole, ketoconazole, naproxen, phenytoin, and probenecid was determined by melt quenching the crystalline drugs to determine their respective critical cooling rate. The inherent supersaturation potential of the drugs in FaSSIF was determined by a solvent shift method where the respective drugs were dissolved in dimethyl sulfoxide and then added to FaSSIF. This study showed that the poor glass formers naproxen, phenytoin, and probenecid could not supersaturate on their own, however for some drug:polymer combinations of naproxen and phenytoin, supersaturation of the drug was enabled by the polymer. In contrast, all of the good glass formers—cinnarizine, itraconazole, and ketoconazole—could supersaturate on their own. Furthermore, the maximum achievable concentration of the good glass formers was unaffected by the presence of a polymer.

The high number of poorly water-soluble compounds in drug development has increased the need for enabling formulations to improve oral bioavailability. One frequently applied approach is to induce supersaturation at the absorptive site, e.g., the small intestine, increasing the amount of dissolved compound available for absorption. However, due to the stochastic nature of nucleation, supersaturating drug delivery systems may lead to inter- and intrapersonal variability. The ability to define a feasible range with respect to the supersaturation level is a crucial factor for a successful formulation. Therefore, an in vitro method is needed, from where the ability of a compound to supersaturate can be defined in a reproducible way. Hence, this study investigates the reproducibility of an in vitro small scale standardized supersaturation and precipitation method (SSPM). First an intralaboratory reproducibility study of felodipine was conducted, after which seven partners contributed with data for three model compounds; aprepitant, felodipine, and fenofibrate, to determine the interlaboratory reproducibility of the SSPM. The first part of the SSPM determines the apparent degrees of supersaturation (aDS) to investigate for each compound. Each partner independently determined the maximum possible aDS and induced 100, 87.5, 75, and 50% of their determined maximum possible aDS in the SSPM. The concentration time profile of the supersaturation and following precipitation was obtained in order to determine the induction time (t(ind)) for detectable precipitation. The data showed that the absolute values of t(ind) and aDS were not directly comparable between partners, however, upon linearization of the data a reproducible rank ordering of the three model compounds was obtained based on the beta-value, which was defined as the slope of the In(t(ind)) versus In(aDS)(-2) plot. Linear regression of this plot showed that aprepitant had the highest beta-value, 15.1, while felodipine

QC 20190206

Green, all-polysaccharide based microcapsules with mechanically robust capsule walls and fast, stimuli-triggered, and switchable permeability behavior show great promise in applications based on selective and timed permeability. Taking a cue from nature, the build-up and composition of plant primary cell walls inspired the capsule wall assembly, because the primary cell walls in plants exhibit high mechanical properties despite being in a highly hydrated state, primarily owing to cellulose microfibrils. The micro capsules (16 +/- 4 mu m in diameter) were fabricated using the layer-by-layer technique on sacrificial CaCO3 templates, using plant polysaccharides (pectin, cellulose nanofibers, and xyloglucan) only. In water, the capsule wall was permeable to labeled dextrans with a hydrodynamic diameter of similar to 6.6 nm. Upon exposure to NaC1, the porosity of the capsule wall quickly changed allowing larger molecules (similar to 12 nm) to permeate. However, the porosity could be restored to its original state by removal of NaCl, by which permeants became trapped inside the capsule's core. The high integrity of cell wall was due to the CNF and the ON/OFF alteration of the permeability properties, and subsequent loading/unloading of molecules, could be repeated several times with the same capsule demonstrating a robust microcontainer with controllable permeability properties., QC 20170531

Drug targeting to the colon via the oral administration route for local treatment of e.g. inflammatory bowel disease and colonic cancer has several advantages such as needle-free administration and low infection risk. A new source for delivery is plant-polysaccharide based delivery platforms such as Rhamnogalacturonan-I (RG-I). In the gastro-intestinal tract the RG-I is only degraded by the action of the colonic microflora. For assessment of potential drug delivery properties, RG-I based microcapsules (~1 μm in diameter) were prepared by an interfacial poly-addition reaction. The cross-linked capsules were loaded with a fluorescent dye (model drug). The capsules showed negligible and very little in vitro release when subjected to media simulating gastric and intestinal fluids, respectively. However, upon exposure to a cocktail of commercial RG-I cleaving enzymes, ~ 9 times higher release was observed, demonstrating that the capsules can be opened by enzymatic degradation. The combined results suggest a potential platform for targeted drug delivery in the terminal gastro-intestinal tract.

Control of drug action through formulation is a vital and very challenging topic within pharmaceutical sciences. Cellulose nanofibers (CNF) are an excipient candidate in pharmaceutical formulations that could be used to easily optimize drug delivery rates. CNF has interesting physico-chemical properties that, when combined with surfactants, can be used to create very stable air bubbles and dry foams. Utilizing this inherent property, it is possible to modify the release kinetics of the model drug riboflavin in a facile way. Wet foams were prepared using cationic CNF and a pharmaceutically acceptable surfactant (lauric acid sodium salt). The drug was suspended in the wetstable foams followed by a drying step to obtain dry foams. Flexible cellular solid materials of different thicknesses, shapes and drug loadings (up to 50 wt%) could successfully be prepared. The drug was released from the solid foams in a diffusion-controlled, sustained manner due to the presence of intact air bubbles which imparted a tortuous diffusion path. The diffusion coefficient was assessed using Franz cells and shown to be more than one order of magnitude smaller for the cellular solids compared to the bubble-free films in the wet state. By changing the dimensions of dry foams while keeping drug load and total weight constant, the drug release kinetics could be modified, e.g. a rectangular box-shaped foam of 8 mm thickness released only 59% of the drug after 24 h whereas a thinner foam sample (0.6 mm) released 78% of its drug content within 8 h. In comparison, the drug release from films (0.009 mm, with the same total mass and an outer surface area comparable to the thinner foam) was much faster, amounting to 72% of the drug within 1 h. The entrapped air bubbles in the foam also induced positive buoyancy, which is interesting from the perspective of gastroretentive drug-delivery., QC 20170120

A super-saturated self-nanoemulsifying drug delivery system (super-SNEDDS), containing the poorly water-soluble drug halofantrine (Hf) at 150% of equilibrium solubility (Seq), was compared in vitro and in vivo with a conventional SNEDDS (75% of Seq) with respect to bioavailability and digestibility. Further, the effect of digestion on oral absorption of Hf from SNEDDS and super-SNEDDS was assessed by incorporation of the lipase inhibitor tetrahydrolipstatin (orlistat) into the SNEDDS. The SNEDDS contained soybean oil/Maisine 34-I (1:1), Kolliphor RH40, and ethanol at a ratio of 55:35:10, w/w percent. For the dynamic in vitro lipolysis, the precipitation of Hf at 60 min was significantly larger for the super-SNEDDS (66.8 ± 16.4%) than for the SNEDDS (18.5 ± 9.2%). The inhibition of the in vitro digestion by orlistat (1% (w/w)) lowered drug precipitation significantly for both the super-SNEDDS (36.8 ± 1.7%) and the SNEDDS (3.9 ± 0.7%). In the in vivo studies, the super-SNEDDS concept proved valid in a rat model with a significantly larger Cmax for the super-SNEDDS (964 ± 167 ng/mL) than for the SNEDDS (506 ± 112 ng/mL). The bioavailability of Hf dosed in super-SNEDDS (32.9 ± 3.6%) and SNEDDS (22.5 ± 6.3%) did not change significantly with co-administration of orlistat (45.5 ± 7.3% and 21.9 ± 6.5%, respectively). However, the pharmacokinetic parameters changed; the tmax of the super-SNEDDS (1.3 ± 0.1 h) and SNEDDS (2.8 ± 1.2 h) were significantly lower when dosed with orlistat (6.0 ± 1.3 and 6.3 ± 1.2 h, respectively). These findings suggest that the role of lipid digestion for the absorption of drugs from SNEDDS may be less important than previously thought., A super-saturated self-nanoemulsifying drug delivery system (super-SNEDDS), containing the poorly water-soluble drug halofantrine (Hf) at 150% of equilibrium solubility (Seq), was compared in vitro and in vivo with a conventional SNEDDS (75% of Seq) with respect to bioavailability and digestibility. Further, the effect of digestion on oral absorption of Hf from SNEDDS and super-SNEDDS was assessed by incorporation of the lipase inhibitor tetrahydrolipstatin (orlistat) into the SNEDDS. The SNEDDS contained soybean oil/Maisine 34-I (1:1), Kolliphor RH40, and ethanol at a ratio of 55:35:10, w/w percent. For the dynamic in vitro lipolysis, the precipitation of Hf at 60 min was significantly larger for the super-SNEDDS (66.8 ± 16.4%) than for the SNEDDS (18.5 ± 9.2%). The inhibition of the in vitro digestion by orlistat (1% (w/w)) lowered drug precipitation significantly for both the super-SNEDDS (36.8 ± 1.7%) and the SNEDDS (3.9 ± 0.7%). In the in vivo studies, the super-SNEDDS concept proved valid in a rat model with a significantly larger Cmax for the super-SNEDDS (964 ± 167 ng/mL) than for the SNEDDS (506 ± 112 ng/mL). The bioavailability of Hf dosed in super-SNEDDS (32.9 ± 3.6%) and SNEDDS (22.5 ± 6.3%) did not change significantly with co-administration of orlistat (45.5 ± 7.3% and 21.9 ± 6.5%, respectively). However, the pharmacokinetic parameters changed; the tmax of the super-SNEDDS (1.3 ± 0.1 h) and SNEDDS (2.8 ± 1.2 h) were significantly lower when dosed with orlistat (6.0 ± 1.3 and 6.3 ± 1.2 h, respectively). These findings suggest that the role of lipid digestion for the absorption of drugs from SNEDDS may be less important than previously thought.