Search

The development of carbon dots (CDs), either using green or chemical precursors, has inevitably led to their wide range application, from bioimaging to optoelectronic devices. The reported precursors and properties of these CDs have opened new opportunities for the future development of high-quality CDs and applications. Green precursors were classified into fruits, vegetables, flowers, leaves, seeds, stem, crop residues, fungi/bacteria species, and waste products, while the chemical precursors were classified into acid reagents and non-acid reagents. This paper quickly reviews ten years of the synthesis of CDs using green and chemical precursors. The application of CDs as sensing materials in optical sensor techniques for environmental monitoring, including the detection of heavy metal ions, phenol, pesticides, and nitroaromatic explosives, was also discussed in this review. This profound review will offer knowledge for the upcoming community of researchers interested in synthesizing high-quality CDs for various applications.

The development of carbon dots (CDs), either using green or chemical precursors, has inevitably led to their wide range application, from bioimaging to optoelectronic devices. The reported precursors and properties of these CDs have opened new opportunities for the future development of high-quality CDs and applications. Green precursors were classified into fruits, vegetables, flowers, leaves, seeds, stem, crop residues, fungi/bacteria species, and waste products, while the chemical precursors were classified into acid reagents and non-acid reagents. This paper quickly reviews ten years of the synthesis of CDs using green and chemical precursors. The application of CDs as sensing materials in optical sensor techniques for environmental monitoring, including the detection of heavy metal ions, phenol, pesticides, and nitroaromatic explosives, was also discussed in this review. This profound review will offer knowledge for the upcoming community of researchers interested in synthesizing high-quality CDs for various applications.

Pesticides are commonly employed in modern agriculture to improve crop yield, and these could potentially to pollute the environment and endanger human life. Hence, developing a highly sensitive sensing element for pesticide detection is important for food safety and environmental protection. The development of polymer nanomaterials-based optical sensor for monitoring pesticides has attracted great attention in recent years. Aside from the novelty of material, the effectiveness and efficiency of materials as sensing layers also should be highlighted. Therefore, the aim of this research is to incorporate graphene nanomaterials and synthetic polymer materials in enhancing the detection properties towards carbaryl based surface plasmon resonance sensor. Herein two different sensing layers based thin film presented, i.e., graphene oxide-polyvinyl alcohol (GO-PVA) and graphene quantum dots-polyvinyl alcohol (GQDs-PVA). The structural properties of both thin films were characterized by Fourier transform infrared (FTIR) spectroscopy had confirmed the presence of functional groups in the composites such as hydroxyl, carbonyl, carboxyl, epoxy and alkoxy. Then, the atomic force microscopy (AFM) shows that the roughness of thin films increased for GO-PVA and GQDs-PVA thin films compared to single element, which shows that the surface morphology influenced by the presence of graphene and PVA. Meanwhile, the optical properties of synthesized thin films were investigated using Ultraviolet-visible (UV-vis) spectroscopy and surface plasmon resonance (SPR) spectroscopy. Based on the UV-vis analysis, the absorbance peaks for the thin films can be observed at the wavelength around 200–500 nm and the band gap obtained for both thin films are 4.086 eV and 4.114 eV for GO-PVA and GQDs-PVA thin films, respectively. Then, the proposed thin films have been incorporated with SPR sensor to evaluate the effectiveness and efficiency for carbaryl detection. From that experimental result, GO-PVA

In this study, graphene quantum dots (GQDs) and polyvinyl alcohol (PVA) composite was prepared and then coated on the surface of gold thin film via the spin coating technique. Subsequently, Fourier transform infrared spectroscopy (FT-IR), atomic force microscopy (AFM), and ultraviolet-visible spectroscopy (UV–Vis) were adopted to understand the structure, surface morphology, and optical properties of the prepared samples. The FT-IR spectral analysis revealed important bands, such as O–H stretching, C=O stretching, C-H stretching, and O=C=O stretching vibrations. The surface roughness of the GQDs-PVA composite thin film was found to be increased after exposure to carbaryl. On the other hand, the optical absorbance of the GQDs-PVA thin film was obtained and further analysis was conducted, revealing a band gap Eg value of 4.090 eV. The sensing potential of the thin film was analyzed using surface plasmon resonance (SPR) spectroscopy. The findings demonstrated that the developed sensor’s lowest detection limit for carbaryl was 0.001 ppb, which was lower than that previously reported, i.e., 0.007 ppb. Moreover, other sensing performance parameters, such as full width at half maximum, detection accuracy, and signal-to-noise ratio, were also investigated to evaluate the sensor’s efficiency.

In this work, a refractive index sensor using TiO2 extracted from moringa leaves-based nanocomposite thin film was developed to detect cadmium ions in an aqueous solution. The experimental results showed a good sensitivity response of 0.4825° ppm−1, a strong binding affinity of 1.4362 ppm−1, and a low signal-to-noise ratio of 0.0755. The proposed sensor also showed good selectivity towards cadmium ions compared to zinc and mercury ions. The changes in the optical properties of titanium dioxide-based nanocomposite thin film towards different concentrations of cadmium ions solution were further demonstrated theoretically. Also, the observed increase in the surface roughness using atomic force microscopy proved the binding of Cd ions to the sensor film. This study is proposing a new potential of titanium dioxide extracted from moringa leaves-based nanocomposite thin film as a surface refractive index sensor for the detection of cadmium ions.

In this work, a refractive index sensor using TiO2 extracted from moringa leaves-based nanocomposite thin film was developed to detect cadmium ions in an aqueous solution. The experimental results showed a good sensitivity response of 0.4825° ppm−1, a strong binding affinity of 1.4362 ppm−1, and a low signal-to-noise ratio of 0.0755. The proposed sensor also showed good selectivity towards cadmium ions compared to zinc and mercury ions. The changes in the optical properties of titanium dioxide-based nanocomposite thin film towards different concentrations of cadmium ions solution were further demonstrated theoretically. Also, the observed increase in the surface roughness using atomic force microscopy proved the binding of Cd ions to the sensor film. This study is proposing a new potential of titanium dioxide extracted from moringa leaves-based nanocomposite thin film as a surface refractive index sensor for the detection of cadmium ions.

In this study, graphene quantum dots (GQDs) and polyvinyl alcohol (PVA) composite was prepared and then coated on the surface of gold thin film via the spin coating technique. Subsequently, Fourier transform infrared spectroscopy (FT-IR), atomic force microscopy (AFM), and ultraviolet-visible spectroscopy (UV–Vis) were adopted to understand the structure, surface morphology, and optical properties of the prepared samples. The FT-IR spectral analysis revealed important bands, such as O–H stretching, C=O stretching, C-H stretching, and O=C=O stretching vibrations. The surface roughness of the GQDs-PVA composite thin film was found to be increased after exposure to carbaryl. On the other hand, the optical absorbance of the GQDs-PVA thin film was obtained and further analysis was conducted, revealing a band gap Eg value of 4.090 eV. The sensing potential of the thin film was analyzed using surface plasmon resonance (SPR) spectroscopy. The findings demonstrated that the developed sensor’s lowest detection limit for carbaryl was 0.001 ppb, which was lower than that previously reported, i.e., 0.007 ppb. Moreover, other sensing performance parameters, such as full width at half maximum, detection accuracy, and signal-to-noise ratio, were also investigated to evaluate the sensor’s efficiency.

In the present work, graphene oxide (GO)–polyvinyl alcohol (PVA) composites thin film has been successfully synthesized and prepared by spin coating techniques. Then, the properties and morphology of the samples were characterized using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and atomic force microscopy (AFM). Experimental FTIR results for GO–PVA thin film demonstrated the existence of important functional groups such as -CH2 stretching, C=O stretching, and O–H stretching. Furthermore, UV-Vis analysis indicated that the GO–PVA thin film had the highest absorbance that can be observed at wavelengths ranging from 200 to 500 nm with a band gap of 4.082 eV. The surface morphology of the GO–PVA thin film indicated the thickness increased when in contact with carbaryl. The incorporation of the GO–PVA thin film with an optical method based on the surface plasmon resonance (SPR) phenomenon demonstrated a positive response for the detection of carbaryl pesticide as low as 0.02 ppb. This study has successfully proposed that the GO–PVA thin film has high potential as a polymer nanomaterial-based SPR sensor for pesticide detection.

In the present work, graphene oxide (GO)–polyvinyl alcohol (PVA) composites thin film has been successfully synthesized and prepared by spin coating techniques. Then, the properties and morphology of the samples were characterized using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and atomic force microscopy (AFM). Experimental FTIR results for GO–PVA thin film demonstrated the existence of important functional groups such as -CH2 stretching, C=O stretching, and O–H stretching. Furthermore, UV-Vis analysis indicated that the GO–PVA thin film had the highest absorbance that can be observed at wavelengths ranging from 200 to 500 nm with a band gap of 4.082 eV. The surface morphology of the GO–PVA thin film indicated the thickness increased when in contact with carbaryl. The incorporation of the GO–PVA thin film with an optical method based on the surface plasmon resonance (SPR) phenomenon demonstrated a positive response for the detection of carbaryl pesticide as low as 0.02 ppb. This study has successfully proposed that the GO–PVA thin film has high potential as a polymer nanomaterial-based SPR sensor for pesticide detection.

Pesticides are commonly employed in modern agriculture to improve crop yield, and these could potentially to pollute the environment and endanger human life. Hence, developing a highly sensitive sensing element for pesticide detection is important for food safety and environmental protection. The development of polymer nanomaterials-based optical sensor for monitoring pesticides has attracted great attention in recent years. Aside from the novelty of material, the effectiveness and efficiency of materials as sensing layers also should be highlighted. Therefore, the aim of this research is to incorporate graphene nanomaterials and synthetic polymer materials in enhancing the detection properties towards carbaryl based surface plasmon resonance sensor. Herein two different sensing layers based thin film presented, i.e., graphene oxide-polyvinyl alcohol (GO-PVA) and graphene quantum dots-polyvinyl alcohol (GQDs-PVA). The structural properties of both thin films were characterized by Fourier transform infrared (FTIR) spectroscopy had confirmed the presence of functional groups in the composites such as hydroxyl, carbonyl, carboxyl, epoxy and alkoxy. Then, the atomic force microscopy (AFM) shows that the roughness of thin films increased for GO-PVA and GQDs-PVA thin films compared to single element, which shows that the surface morphology influenced by the presence of graphene and PVA. Meanwhile, the optical properties of synthesized thin films were investigated using Ultraviolet-visible (UV-vis) spectroscopy and surface plasmon resonance (SPR) spectroscopy. Based on the UV-vis analysis, the absorbance peaks for the thin films can be observed at the wavelength around 200–500 nm and the band gap obtained for both thin films are 4.086 eV and 4.114 eV for GO-PVA and GQDs-PVA thin films, respectively. Then, the proposed thin films have been incorporated with SPR sensor to evaluate the effectiveness and efficiency for carbaryl detection. From that experimental result, GO-PVA

There are extensive studies on the development of composite solutions involving various types of materials. Therefore, this works aims to incorporate two polymers of nanocrystalline cellulose (NCC) and poly(3,4-ethylenethiophene) (PEDOT) to develop a composite thin film via the spin-coating method. Then, Fourier transform infrared (FTIR) spectroscopy is employed to confirm the functional groups of the NCC/PEDOT thin film. The atomic force microscopy (AFM) results revealed a relatively homogeneous surface with the roughness of the NCC/PEDOT thin film being slightly higher compared with individual thin films. Meanwhile, the ultraviolet/visible (UV/vis) spectrometer evaluated the optical properties of synthesized thin films, where the absorbance peaks can be observed around a wavelength of 220 to 700 nm. An optical band gap of 4.082 eV was obtained for the composite thin film, which is slightly lower as compared with a single material thin film. The NCC/PEDOT thin film was also incorporated into a plasmonic sensor based on the surface plasmon resonance principle to evaluate the potential for sensing mercury ions in an aqueous medium. Resultantly, the NCC/PEDOT thin film shows a positive response in detecting the various concentrations of mercury ions. In conclusion, this work has successfully developed a new sensing layer in fabricating an effective and potential heavy metal ions sensor.

There are extensive studies on the development of composite solutions involving various types of materials. Therefore, this works aims to incorporate two polymers of nanocrystalline cellulose (NCC) and poly(3,4-ethylenethiophene) (PEDOT) to develop a composite thin film via the spin-coating method. Then, Fourier transform infrared (FTIR) spectroscopy is employed to confirm the functional groups of the NCC/PEDOT thin film. The atomic force microscopy (AFM) results revealed a relatively homogeneous surface with the roughness of the NCC/PEDOT thin film being slightly higher compared with individual thin films. Meanwhile, the ultraviolet/visible (UV/vis) spectrometer evaluated the optical properties of synthesized thin films, where the absorbance peaks can be observed around a wavelength of 220 to 700 nm. An optical band gap of 4.082 eV was obtained for the composite thin film, which is slightly lower as compared with a single material thin film. The NCC/PEDOT thin film was also incorporated into a plasmonic sensor based on the surface plasmon resonance principle to evaluate the potential for sensing mercury ions in an aqueous medium. Resultantly, the NCC/PEDOT thin film shows a positive response in detecting the various concentrations of mercury ions. In conclusion, this work has successfully developed a new sensing layer in fabricating an effective and potential heavy metal ions sensor.

Dengue viral infection is one of the most common deadliest diseases and has become a recurrent issue for public health in tropical countries. Although the spectrum of clinical diagnosis and treatment have recently been established, the efficient and rapid detection of dengue virus (DENV) during viremia and the early febrile phase is still a great challenge. In this study, a dithiobis (succinimidyl undecanoate, DSU)/amine-functionalized reduced graphene oxide-–polyamidoamine dendrimer (DSU/amine-functionalized rGO–PAMAM) thin film-based surface plasmon resonance (SPR) sensor was developed for the detection of DENV 2 E-proteins. Different concentrations of DENV 2 E-proteins were successfully tested by the developed SPR sensor-based system. The performance of the developed sensor showed increased shift in the SPR angle, narrow full-width–half-maximum of the SPR curve, high detection accuracy, excellent figure of merit and signal-to-noise ratio, good sensitivity values in the range of 0.08–0.5 pM (S = 0.2576°/pM, R2 = 0.92), and a high equilibrium association constant (KA) of 7.6452 TM−1. The developed sensor also showed a sensitive and selective response towards DENV 2 E-proteins compared to DENV 1 E-proteins and ZIKV (Zika virus) E-proteins. Overall, it was concluded that the Au/DSU/amine-functionalized rGO–PAMAM thin film-based SPR sensor has potential to serve as a rapid clinical diagnostic tool for DENV infection.

Dengue viral infection is one of the most common deadliest diseases and has become a recurrent issue for public health in tropical countries. Although the spectrum of clinical diagnosis and treatment have recently been established, the efficient and rapid detection of dengue virus (DENV) during viremia and the early febrile phase is still a great challenge. In this study, a dithiobis (succinimidyl undecanoate, DSU)/amine-functionalized reduced graphene oxide-–polyamidoamine dendrimer (DSU/amine-functionalized rGO–PAMAM) thin film-based surface plasmon resonance (SPR) sensor was developed for the detection of DENV 2 E-proteins. Different concentrations of DENV 2 E-proteins were successfully tested by the developed SPR sensor-based system. The performance of the developed sensor showed increased shift in the SPR angle, narrow full-width–half-maximum of the SPR curve, high detection accuracy, excellent figure of merit and signal-to-noise ratio, good sensitivity values in the range of 0.08–0.5 pM (S = 0.2576°/pM, R2 = 0.92), and a high equilibrium association constant (KA) of 7.6452 TM−1. The developed sensor also showed a sensitive and selective response towards DENV 2 E-proteins compared to DENV 1 E-proteins and ZIKV (Zika virus) E-proteins. Overall, it was concluded that the Au/DSU/amine-functionalized rGO–PAMAM thin film-based SPR sensor has potential to serve as a rapid clinical diagnostic tool for DENV infection.

Dengue viral infection is one of the most common deadliest diseases and has become a recurrent issue for public health in tropical countries. Although the spectrum of clinical diagnosis and treatment have recently been established, the efficient and rapid detection of dengue virus (DENV) during viremia and the early febrile phase is still a great challenge. In this study, a dithiobis (succinimidyl undecanoate, DSU)/amine-functionalized reduced graphene oxide-–polyamidoamine dendrimer (DSU/amine-functionalized rGO–PAMAM) thin film-based surface plasmon resonance (SPR) sensor was developed for the detection of DENV 2 E-proteins. Different concentrations of DENV 2 E-proteins were successfully tested by the developed SPR sensor-based system. The performance of the developed sensor showed increased shift in the SPR angle, narrow full-width–half-maximum of the SPR curve, high detection accuracy, excellent figure of merit and signal-to-noise ratio, good sensitivity values in the range of 0.08–0.5 pM (S = 0.2576°/pM, R2 = 0.92), and a high equilibrium association constant (KA) of 7.6452 TM−1. The developed sensor also showed a sensitive and selective response towards DENV 2 E-proteins compared to DENV 1 E-proteins and ZIKV (Zika virus) E-proteins. Overall, it was concluded that the Au/DSU/amine-functionalized rGO–PAMAM thin film-based SPR sensor has potential to serve as a rapid clinical diagnostic tool for DENV infection.

In this study, synthesis and characterization of chitosan/maghemite (Cs/Fe2O3) composites thin film has been described. Its properties were characterized using Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and ultraviolet-visible spectroscopy (UV-Vis). FTIR confirmed the existence of Fe–O bond, C–N bond, C–C bond, C–O bond, O=C=O bond and O–H bond in Cs/Fe2O3 thin film. The surface morphology of the thin film indicated the relatively smooth and homogenous thin film, and also confirmed the interaction of Fe2O3 with the chitosan. Next, the UV-Vis result showed high absorbance value with an optical band gap of 4.013 eV. The incorporation of this Cs/Fe2O3 thin film with an optical-based method, i.e., surface plasmon resonance spectroscopy showed positive response where mercury ion (Hg2+) can be detected down to 0.01 ppm (49.9 nM). These results validate the potential of Cs/Fe2O3 thin film for optical sensing applications in Hg2+ detection.

In this study, synthesis and characterization of chitosan/maghemite (Cs/Fe2O3) composites thin film has been described. Its properties were characterized using Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and ultraviolet-visible spectroscopy (UV-Vis). FTIR confirmed the existence of Fe–O bond, C–N bond, C–C bond, C–O bond, O=C=O bond and O–H bond in Cs/Fe2O3 thin film. The surface morphology of the thin film indicated the relatively smooth and homogenous thin film, and also confirmed the interaction of Fe2O3 with the chitosan. Next, the UV-Vis result showed high absorbance value with an optical band gap of 4.013 eV. The incorporation of this Cs/Fe2O3 thin film with an optical-based method, i.e., surface plasmon resonance spectroscopy showed positive response where mercury ion (Hg2+) can be detected down to 0.01 ppm (49.9 nM). These results validate the potential of Cs/Fe2O3 thin film for optical sensing applications in Hg2+ detection.

Dengue viral infection is one of the most common deadliest diseases and has become a recurrent issue for public health in tropical countries. Although the spectrum of clinical diagnosis and treatment have recently been established, the efficient and rapid detection of dengue virus (DENV) during viremia and the early febrile phase is still a great challenge. In this study, a dithiobis (succinimidyl undecanoate, DSU)/amine-functionalized reduced graphene oxide-–polyamidoamine dendrimer (DSU/amine-functionalized rGO–PAMAM) thin film-based surface plasmon resonance (SPR) sensor was developed for the detection of DENV 2 E-proteins. Different concentrations of DENV 2 E-proteins were successfully tested by the developed SPR sensor-based system. The performance of the developed sensor showed increased shift in the SPR angle, narrow full-width–half-maximum of the SPR curve, high detection accuracy, excellent figure of merit and signal-to-noise ratio, good sensitivity values in the range of 0.08–0.5 pM (S = 0.2576°/pM, R2 = 0.92), and a high equilibrium association constant (KA) of 7.6452 TM−1. The developed sensor also showed a sensitive and selective response towards DENV 2 E-proteins compared to DENV 1 E-proteins and ZIKV (Zika virus) E-proteins. Overall, it was concluded that the Au/DSU/amine-functionalized rGO–PAMAM thin film-based SPR sensor has potential to serve as a rapid clinical diagnostic tool for DENV infection.

X-ray photoelectron spectroscopy (XPS) is a spectroscopic technique that is surface-sensitive that can be used to analyze the chemical and elemental state of a sample on the surface. In this research, XPS was used to study the chemical interaction of gold/nanocrystalline cellulose-graphene oxide (gold/NCC-GO) thin film. The thin film was prepared by deposition of NCC-GO on a gold thin film using spin coating method to obtain a homogeneous gold/NCC-GO thin film before characterized by XPS. From the XPS results, it is confirmed that carbon, oxygen, nitrogen, and sulfur elements exist on the gold/NCC-GO thin film surface. Further deconvolution has also been carried out by Voigt curve fitting program in order to determine the sub-peak component of each elements. Besides that, the gold/NCC-GO thin film has potential to be used in sensing metal ion application. The interaction of metal ions with the gold/NCC-GO thin film was optically proven using surface plasmon resonance optical sensor before the thin film was characterized again by XPS to confirm the chemical interactions involved. It is believed that the existence negative charge functional groups, i.e., COO− and SO3− on the gold/NCC-GO thin film surface played an important role during the interaction.

X-ray photoelectron spectroscopy (XPS) is a spectroscopic technique that is surface-sensitive that can be used to analyze the chemical and elemental state of a sample on the surface. In this research, XPS was used to study the chemical interaction of gold/nanocrystalline cellulose-graphene oxide (gold/NCC-GO) thin film. The thin film was prepared by deposition of NCC-GO on a gold thin film using spin coating method to obtain a homogeneous gold/NCC-GO thin film before characterized by XPS. From the XPS results, it is confirmed that carbon, oxygen, nitrogen, and sulfur elements exist on the gold/NCC-GO thin film surface. Further deconvolution has also been carried out by Voigt curve fitting program in order to determine the sub-peak component of each elements. Besides that, the gold/NCC-GO thin film has potential to be used in sensing metal ion application. The interaction of metal ions with the gold/NCC-GO thin film was optically proven using surface plasmon resonance optical sensor before the thin film was characterized again by XPS to confirm the chemical interactions involved. It is believed that the existence negative charge functional groups, i.e., COO− and SO3− on the gold/NCC-GO thin film surface played an important role during the interaction.