Search

Herein, we report the synthesis of ZnO nanoparticles (ZnO-CB NPs) by employing the solution combustion method using an aqueous extract of brinjal calyxes as fuel. Characterization techniques, such as X-ray diffraction (XRD), Fourier transform Infrared spectroscopy (FTIR), UV–visible spectroscopy, and Scanning electron microscopy (SEM), were used to investigate the structural, optical, and morphological properties of synthesized nanoparticles, respectively. Highly porous hexagonal crystalline ZnO-CB NPs with less than 7 nm particle size were obtained. The photocatalytic performance of synthesized material is measured with Malachite green (MG), Basic brown 1 (BB1), and Acid orange 36 (AO36) as benchmark dyes. It showed that the synthesized material worked effectively under pH 10 with UV light irradiation. The synthesized ZnO-CB NP shows good removal effectiveness of the MG, BB1, and AO36 dyes with 99.3 %, 99.6 %, and 99.5 %, respectively, which can be promising photocatalysts for ecological applications such as wastewater remediation. Further, the synthesized ZnO-CB NP was used as blends in the methyl ester of Millettia pinnata oil (MPME), which is blended 20 % with commercial diesel (MPME20). The synthesized ZnO-CB NP was added to the MPME20 in varying amounts to ascertain its effects on the quality of emissions of various greenhouse gases such as hydrocarbons, COx, and NOx. Moreover, brake thermal efficiency (BTHE) and brake-specific fuel consumption (BSFC) were studied for the blends. The blend MPME20 with 25 mg of ZnO-CB NP, i.e., MPME20-25 mg, ZnO-CB, displays the best performance and reduced emissions.

Among various clear energy generation processes, electrocatalytic water splitting or hydrogen evolution reaction (HER) has been considered as an efficient method for the sustainable production of hydrogen (H2) fuel. But, significant efforts are still required to develop cheap, effective and stable electrocatalysts for water splitting to achieve the economical production of H2. In the quest of finding cheap electrocatalysts, herein, we demonstrate the preparation of palladium (Pd) nanoparticles decorated nitrogen (N) doped highly reduced graphene oxide (NDG-Pd) based electrocatalysts. The nitrogen (N) doped highly reduced graphene oxide (NDG) was produced by using graphene oxide as precursor, which was reduced and doped with nitrogen, simultaneously in one-step hydrothermal method. Subsequently, Pd nanoparticles were decorated on the surface of NDG using a facile ultrasonic method to produce NDG-Pd. In order to restrict the amount of precious metal to reduce the cost of catalysts, very small percentage of Pd, such as, 1 and 3 % was utilized during the preparation of electrocatalysts. The as-prepared electrocatalysts were successfully characterized by using different methods such as, XRD, XPS, EDX, BET, SEM and TEM. Results confirmed the formation of slightly agglomerated, smaller size of Pd NPs on the surface of NDG with an average particle size of ∼ 6 nm. The as prepared nanocomposites NDG, NDG-Pd1% and NDG-Pd3% were used to prepare electrodes and their electrocatalytic activity was evaluated towards the production of H2 through water splitting. The results of electrochemical performance of as-prepared electrodes within the voltage range have revealed that among different samples prepared, the NDG did not show any current, whereas NDG-Pd3% showed a good potential for HER with current density ≈24 mA/cm2 at very low potential i.e. −0.2 V vs RHE.

By utilizing the combustion process, nanoparticles can be produced quickly, easily, and in an environmentally friendly manner. In this study, sheep dung is employed as fuel for the synthesis of nickel oxide nanoparticles (NiO-SD), and characterization techniques such as XRD, FTIR, UV, FESEM, and EDX, are used to confirm the as-desired nanoparticles. Malachite green (MG) and methylene blue (MB), respectively, are used as benchmark dyes to measure the photocatalytic effectiveness of the material and systematically investigated the effects of the light source, dye concentration, dose of photocatalyst, and pH value on the effectiveness of photocatalyst and photodegradation kinetics. It is found that the NiO-SD, when exposed to UV light, shows good removal effectiveness of the MB and MG dyes, according to the photodegradation data of 99.9% and 96.8%, respectively. The remarkable photodegradation efficiency of MB and MG dyes over the developed photocatalyst is also explained by a plausible photo-catalytic process. The green-manufactured photocatalyst can be a promising for ecological applications such as waste-water remediation.

The present study demonstrates the synthesis of phase pure hematite (α-Fe2O3) nanoparticles (NPs) using collagen protein and calcium carbonate extracted from eggshell membranes and eggshells, respectively, as organic additives. To test the influence of organic additives on the quality of the resulting NPs, the amount of eggshell powder was varied between 1 to 5 g in aqueous iron nitrate solution. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and RAMAN analysis confirmed the formation of hematite NPs without any impurities. FTIR spectra revealed the presence of polyphenolic constituents on the surface of the resulting NPs as stabilizers, which may potentially be responsible for the observed antioxidant and antibacterial properties. Furthermore, the stable phase and the presence of low defects divulged the high hardness value (~983 HV) and fracture toughness (8.59 MPa m1/2), which can be exploited for bone implantation. The FE-SEM results demonstrate the formation of spherical particles, which are well-separated NPs. The results of a biodegradation study which was carried out in phosphate-buffered saline (PBS) revealed that the as-prepared NPs retained their hardness even after 72 h of soaking. These prepared NPs showed 95% radical scavenging activity (RSA) and were good carriers against S. aureus bacteria. Moreover, the SEM images of the mineralization of iron oxide NPs confirmed the formation of new bone. After 5 weeks, all pores were filled, and the minerals were deposited on the surfaces of the scaffolds.

Background: Bacterial infections and cancers may cause various acute or chronic diseases, which have become serious global health issues. This requires suitable alternatives involving novel and efficient materials to replace ineffective existing therapies. In this regard, graphene composites are being continuously explored for a variety of purposes, including biomedical applications, due to their remarkable properties.Methods: Herein, we explore, in-vitro, the different biological properties of highly reduced graphene oxide (HRG), including anti-cancer, anti-bacterial, and anti-biofilm properties. Furthermore, to analyze the interactions of graphene with proteins of microbes, in silico docking analysis was also carried out. To do this, HRG was prepared using graphene oxide as a precursor, which was further chemically reduced to obtain the final product. The as-prepared HRG was characterized using different types of microscopic and spectroscopic techniques.Results: The HRG revealed significant cytotoxic ability, using a dose-dependent anti-cell proliferation approach, which substantially killed human breast cancer cells (MCF-7) with IC50 of 29.51 ± 2.68 μg/mL. The HRG demonstrated efficient biological properties, i.e., even at low concentrations, HRG exhibited efficient anti-microbial properties against a variety of microorganisms. Among the different strains, Gram-positive bacteria, such as B. subtilis, MRSA, and S. aureus are more sensitive to HRG compared to Gram-negative bacteria. The bactericidal properties of HRG are almost similar to a commercially available effective antibiotic (ampicillin). To evaluate the efficacy of HRG against bacterial biofilms, Pseudomonas aeruginosa and MRSA were applied, and the results were compared with gentamycin and ampicillin, which are commonly applied standard antibiotics. Notably, HRG demonstrated high inhibition (94.23%) against P.aeruginosa, with lower MIC (50 μg/mL) and IC50 (26.53 μg/mL) values, whereas ampicillin and gentamicin showed similar inhibition (90.45% and 91.31% respectively) but much higher MIC and IC50 values.Conclusion: Therefore, these results reveal the excellent biopotential of HRG in different biomedical applications, including cancer therapy; antimicrobial activity, especially anti-biofilm activity; and other biomedicine-based therapies. Based on the molecular docking results of Binding energy, it is predicted that pelB protein and HRG would form the best stable docking complex, and high hydrogen and hydrophobic interactions between the pelB protein and HRG have been revealed. Therefore, we conclude that HRG could be used as an antibiofilm agent against P. aeruginosa infections.

Application of nanoparticles in drug delivery has become an emerging phenomenon. This is typically achieved either via custom made nanoparticles or through the functionalization of pre-synthesized nanoparticles with the pharmaceutically active ingredients. In this study, Pregabalin, which is the active pharmaceutical ingredient of commercially available drug Lyrica, is used to functionalize pre-synthesized gold nanoparticles (AuNPs). The work was divided into two parts. The first part determined by synthesis of AuNPs. The second part was achieving conjugation of the AuNPs with Pregabalin to obtain nanocomposites (AuNPs-PGN). AuNPs formed were nanosized, spherical in shape, with a particle size ~35 nm. The probable nanocomposite formation takes place by conjugation between AuNPs and the carboxyl group (COOH) of Pregabalin.

The formation of a C-C bond through Mizoroki-Heck cross-coupling reactions in water with efficient heterogeneous catalysts is a challenging task. In this current study, a highly reduced graphene oxide (HRG) immobilized palladium (Pd) nanoparticle based catalyst (HRG-Py-Pd) is used to catalyze Mizoroki-Heck cross-coupling reactions in water. During the preparation of the catalyst, amino pyrene is used as a smart functionalizing ligand, which offered chemically specific binding sites for the effective and homogeneous nucleation of Pd NPs on the surface of HRG, which significantly enhanced the physical stability and dispersibility of the resulting catalyst in an aqueous medium. Microscopic analysis of the catalyst revealed a uniform distribution of ultrafine Pd NPs on a solid support. The catalytic properties of HRG-Py-Pd are tested towards the Mizoroki-Heck cross-coupling reactions of various aryl halides with acrylic acid in an aqueous medium. Furthermore, the catalytic efficacy of HRG-Py-Pd is also compared with its non-functionalized counterparts such as HRG-Pd and pristine Pd NPs (Pd-NPs). Using the HRG-Py-Pd nanocatalyst, the highest conversion of 99% is achieved in the coupling reaction of 4-bromoanisol and acrylic acid in an aqueous solution in a relatively short period of time (3 h), with less quantity of catalyst (3 mg). Comparatively, pristine Pd NPs delivered lower conversion (∼92%) for the same reaction required a long reaction time and a large amount of catalyst (5.3 mg). Indeed, the conversion of the reaction further decreased to just 40% when 3 mg of Pd-NPs was used which was sufficient to produce 99% conversion in the case of HRG-Py-Pd. On the other hand, HRG-Pd did not deliver any conversion and was ineffective even after using a high amount of catalyst and a longer reaction time. The inability of the HRG-Pd to promote coupling reactions can be attributed to the agglomeration of Pd NPs which reduced the dispersion quality of the catalyst in water. Therefore, the high aqueous stability of HRG-Py-Pd due to smart functionalization can be utilized to perform other organic transformations in water which was otherwise not possible.

The utilization of heterogeneous catalysts during the production of biodiesel potentially minimize the cost of processing due to the exclusion of the separation step. The (X wt%)Ni–ZrO2 (where X = 10, 25 and 50) catalysts prepared through a hydrothermal process were tested for the production of biodiesel by the transesterification of waste cooking oil (WCO) with methanol. The influences of various reaction parameters were systematically optimized. While the physicochemical characteristics of the as-synthesized catalysts were examined using numerous techniques such as FTIR, XRD, TGA BET, EDX, SEM, and HRTEM. Among all the catalysts, (10 wt%)Ni–ZrO2 exhibited high surface area when compared to the pristine ZrO2, (25 wt%)Ni–ZrO2 and (50 wt%)Ni–ZrO2 nanocatalysts. It may have influenced the catalytic properties of (10 wt%)Ni–ZrO2, which exhibited maximum catalytic activity with a biodiesel production yield of 90.5% under optimal conditions. Such as 15:1 methanol to oil molar ratio, 10 wt% catalysts to oil ratio, 8 h reaction time and 180 °C reaction temperature. Furthermore, the recovered catalyst was efficiently reused in several repeated experiments, demonstrating marginal loss in its activity after multiple cycles (five times).

Green syntheses of metallic nanoparticles using plant extracts as effective sources of reductants and stabilizers have attracted decent popularity due to their non-toxicity, environmental friendliness and rapid nature. The current study demonstrates the ecofriendly, facile and inexpensive synthesis of silver nanoparticles (AP-AgNPs) using the extract of aerial parts of the Anthemis pseudocotula Boiss. plant (AP). Herein, the aerial parts extract of AP performed a twin role of a reducing as well as a stabilizing agent. The green synthesized AP-AgNPs were characterized by several techniques such as XRD, UV-Vis, FT-IR, TEM, SEM and EDX. Furthermore, the antimicrobial and antibiofilm activity of as-prepared AP-AgNPs were examined by a standard two-fold microbroth dilution method and tissue culture plate methods, respectively, against several Gram-negative and Gram-positive bacterial strains and fungal species such as Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), multidrug-resistant Pseudomonas aeruginosa (MDR-PA) and Acinetobacter baumannii (MDR-AB), methicillin-resistant S. aureus (MRSA) and Candida albicans (C. albicans) strains. The antimicrobial activity results clearly indicated that the Gram-negative bacteria MDR-PA was most affected by AgNPs as compared to other Gram-negative and Gram-positive bacteria and fungi C. albicans. Whereas, in the case of antibiofilm activity, it has been found that AgNPs at 0.039 mg/mL, inhibit biofilms formation of Gram-negative bacteria i.e., MDR-PA, E. coli, and MDR-AB by 78.98 ± 1.12, 65.77 ± 1.05 and 66.94 ± 1.35%, respectively. On the other hand, at the same dose (i.e., 0.039 mg/mL), AP-AgNPs inhibits biofilm formation of Gram-positive bacteria i.e., MRSA, S. aureus and fungi C. albicans by 67.81 ± 0.99, 54.61 ± 1.11 and 56.22 ± 1.06%, respectively. The present work indicates the efficiency of green synthesized AP-AgNPs as good antimicrobial and antibiofilm agents against selected bacterial and fungal species.

This work demonstrates hydrazine electro-oxidation and sensing using an ultrathin copper oxide nanosheet (CuO-NS) architecture prepared via a versatile foam-surfactant dual template (FSDT) approach. CuO-NS was synthesised by chemical deposition of the hexagonal surfactant Brij®58 liquid crystal template containing dissolved copper ions using hydrogen foam that was concurrently generated by a sodium borohydride reducing agent. The physical characterisations of the CuO-NS showed the formation of a two-dimensional (2D) ultrathin nanosheet architecture of crystalline CuO with a specific surface area of ~39 m2/g. The electrochemical CuO-NS oxidation and sensing performance for hydrazine oxidation revealed that the CuO nanosheets had a superior oxidation performance compared with bare-CuO, and the reported state-of-the-art catalysts had a high hydrazine sensitivity of 1.47 mA/cm2 mM, a low detection limit of 15 μM (S/N = 3), and a linear concentration range of up to 45 mM. Moreover, CuO-NS shows considerable potential for the practical use of hydrazine detection in tap and bottled water samples with a good recovery achieved. Furthermore, the foam-surfactant dual template (FSDT) one-pot synthesis approach could be used to produce a wide range of nanomaterials with various compositions and nanoarchitectures at ambient conditions for boosting the electrochemical catalytic reactions.

The use of heterogeneous catalyst for biodiesel production can reduce the price of separation process and therefore minimize the biodiesel cost. ZnCuO/N-doped graphene (NDG) catalyst synthesized by facile mechanochemical procedure was tested in the transesterification of waste cooking oil (WCO) with methanol to produce biodiesel. The effects of catalyst loading (0–15 wt%), weight percentage of NDG (10–100%), methanol to oil molar ratio (6:1–18:1), reaction time (2–10 h) and reaction temperature (120–200 °C) were systematically studied at the optimal conditions. Additionally, the properties of the fabricated catalysts were assessed via XRD, FTIR, N2 sorption studies, HRTEM, TGA and Raman spectroscopy. It was found that the ZnCuO/(X%)NDG nanocomposites exhibit enhanced catalytic performance when compared with the ZnCuO catalyst (without NDG) under the identical conditions. The efficacy of the ZnCuO/(X%)NDG nanocomposites has improved owing to the inclusion of NDG in the catalytic system, which in-turn enhanced the properties of the mixed metal oxides (MMO’s) such as surface area, defective sites to a great extent. The ZnCuO/(30%)NDG catalyst displayed a highest catalytic activity towards transesterification of WCO (97.1%) at the optimized conditions of 10 wt% catalyst loading, 15:1 methanol:oil molar ratio, 8 h reaction time and 180 °C reaction temperature. Moreover, the recovered catalyst was successfully reused six cycles with no discernible loss in its activity.

Nanomedicine has been used as a precise treatment for many diseases. The advantage of using nanodrugs is that they have more permeability and less toxicity to cells, which enhances the drug delivery system. Graphene is well known for its potential biological applications in drug, food, and pharma industries. This study aimed to assess the productivity and potentiality of nitrogen-doped graphene (NDG) and to evaluate their anticancer, antimicrobial, and biofilm inhibition activity. Nitrogen-doped graphene was synthesized by using a one-pot facile synthesis of NDG, wherein the NDG was prepared by the reduction of graphene oxide (GO) in the presence of hydrazine hydrate as a reducing agent, while ammonium hydroxide was used as a source of nitrogen on the surface of graphene. As-synthesized NDG was characterized by various characterization techniques such as UV-Vis, FT-IR, XRD, XPS, TEM, and N2 sorption studies analysis. Antimicrobial, anticancer, and biofilm inhibition assays were performed by standard protocols. N-doped graphene (NDG) showed better activity against Gram-positive bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA), Bacillus subtillis, Streptococcus pneumoniae, and Streptococcus mutans (p ≤ 0.05), whereas there was no activity against Gram-negative strains in Klebsiella pneumoniae and Pseudomonas aeruginosa. Biofilm inhibition was also improved with NDG compared to the standard ampicillin. NDG showed better results in both MCF-7 and Hela cell lines with IC50 of 27.15 µg/mL and 30.85 µg/mL, respectively. In conclusion, NDG has the best ability for use as a biomolecule, and research studies focusing on proteomics, metabolomics, and in vivo studies are needed to increase the impact of NDG in the drug and pharma industry.

Plant extract-based green synthesis of metal nanoparticles (NPs) has become a popular approach in the field of nanotechnology. In this present investigation, silver nanoparticles were prepared by an efficient and facile approach using Juniperus procera extract as a bioreducing and stabilizing agent. The as-synthesized silver nanoparticles (JP-AgNPs) were characterized by several characterization techniques such as UV–Vis, XRD, FT-IR, HR-TEM, and EDX analysis. The XRD analysis evidently confirms that the as-synthesized Ag nanoparticles (NPs) from Juniperus procera plant extract (JP-AgNPs) are crystalline in nature. FT-IR analysis confirms that the plant extract plays a dual role as a bioreducing and capping agent, while HR-TEM revealed the spherical morphology of as-synthesized JP-AgNPs with the size of ~23 nm. Furthermore, the synthesized JP-AgNPs were evaluated for antibacterial properties against several bacterial and fungal strains such as Staphylococcus aureus (ATCC 12228), Escherichia coli (ATCC 25922), Pseudomonas aeruginosa (ATCC 27853), Proteus mirabilis (ATCC 4753), Cryptococcus neoformans (ATCC 16620), and Candida albicans (ATCC 885-653). The JP-AgNPs displayed an efficient mean zone of inhibition (MZI) at 50.00 µL for bacterial associated with fungal pathogens than the plant extract. Mainly, MZI values against microbial pathogens were as follows; E. coli (17.17 ± 0.72 mm), P. mirabilis (14.80 ± 0.17 mm), and C. albicans (14.30 ± 0.60 mm), whereas JP-AgNPs showed moderate activity against P. aeruginosa (11.50 ± 0.29 mm) and C. neoformans (9.83 ± 0.44 mm). Notably, the tested JP-AgNPs have displayed almost similar antimicrobial activities with that of standard antimicrobial drugs, such as streptomycin and nystatin. The enhanced antimicrobial activity of JP-AgNPs can be ascribed to the quality of resultant NPs including, uniform size, shape, and aqueous colloidal stability of nanoparticles.

In this work, ZnO nanocrystals (NCs) have been effectively synthesized by a simple, efficient and cost-effective method using coconut husk extract as a novel fuel. The synthesized NCs are characterized by UV-Vis, XRD, FT-IR, SEM, EDX, Raman and PL studies. The obtained ZnO were found to be UV-active with a bandgap of 2.93 eV. The X-ray diffraction pattern confirms the crystallinity of the ZnO with hexagonally structured ZnO with a crystallite size of 48 nm, while the SEM analysis reveals the hexagonal bipyramid morphology. Photocatalytic activities of the synthesized ZnO NCs are used to degrade methylene blue and metanil yellow dyes.

Nickel–manganese mixed oxides doped with 1, 3, 5 mol% ytterbia have been prepared by co-precipitation method and used in the catalytic oxidation of benzyl alcohol. Catalytic activity of these oxides calcined at 400 °C and 500 °C was studied for selective oxidation of benzyl alcohol to the corresponding aldehyde using molecular oxygen as an oxidizing agent. The results showed that thermally stable 5 mol% ytterbia doped nickel–manganese oxide [Yb2O3-(5%)-Ni6MnO8] exhibited highest catalytic performance when it was calcined at 400 °C. A 100% conversion of the benzyl alcohol was achieved with >99% selectivity to benzaldehyde within a reaction period of 5 h at 100 °C. The mixed oxide prepared has been characterized by scanning election microscopy (SEM) and energy dispersive X-ray analysis (EDXA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) and temperature programed reduction (H2-TPR).

Due to the recent advancement in the development of various characterization techniques, mixed metal oxide (MMO) based catalysts have gained tremendous attention in the field of catalysis. In this study, we demonstrated the synthesis of a series of novel MMO based catalysts by a facile co-precipitation method. The detailed structure and composition of thoria promoted NiMnO catalysts was investigated using various microscopic and spectroscopic techniques such as, SEM, EDAX, XRD, TGA, BET and TPR. In order to study the effect of the content of thorium oxide on the catalytic activity of the as-prepared material various samples were prepared by the addition of low quantities of thorium oxide with 1%, 3% and 5% on NiMnO. The catalytic performances of the as-prepared catalysts were evaluated towards the aerobic oxidation of benzyl alcohol using molecular oxygen as oxidant. Furthermore, in order to investigate the effect of the calcination temperatures on the catalytic activities of the as-prepared materials, the samples were calcined at three different temperatures at 300 °C, 400 °C and 500 °C. The catalysts displayed significant enhancement in catalytic activity towards the catalytic conversion of benzyl alcohol (C6H5CH2OH) to benzaldehyde (C6H5CHO). Detailed kinetic studies of the reactions using gas chromatography have revealed that the variation of calcination temperature and the percentage of thoria had significant effect on the catalytic performances of the materials. Among all synthesized catalysts ThO2-(5%)-NiMnO catalyst calcined at 400 °C exhibited the highest catalytic performance and stability for the selective oxidation of alcohols.

Green and eco-friendly synthesis of palladium nanoparticles NPs is carried out under facile and eco-friendly conditions using an aqueous solution of Salvadora persica L. (SP) root extract (RE) as a bioreductant, which is commonly known as Miswak. The as-synthesized Pd NPs were characterized using various spectroscopic and microscopic techniques, including, UV–Vis spectroscopy, FT-IR spectroscopy, XRD, ICP-MS and TEM. Detailed investigations of the Pd NPs have confirmed that the polyphenolic phytomolecules present in the RE of Miswak not only act as a bioreductant by facilitating the reduction and growth of Pd NPs, but they also functionalize the surface of Pd NPs and stabilized them in various solvents. Furthermore, the catalytic activity of the green synthesized Pd NPs was also tested toward the Suzuki coupling reactions of various aryl halides in aqueous media. The as-prepared Pd NPs exhibited superior catalytic activity and reusability for the Suzuki coupling reaction in aqueous and aerobic conditions. The kinetics of the reaction studied by GC revealed that the conversion of various aryl halides to biphenyl takes place in a short time.

Due to their excellent physicochemical properties and synergistic effect, graphene metallic NPs based nanocomposites have gained significant attention in various technological fields including catalysis. Here we demonstrate a single pot, facile and environmental friendly synthesis of catalytically active palladium(Pd)@graphene nanocomposites (SP-HRG-Pd) by the simultaneous reduction of graphene oxide (GRO) and PdCl2 using Salvadora persica L. (miswak) root extract (RE) as bioreductant. The synthesis of SP-HRG-Pd was confirmed by various spectroscopic and microscopic techniques, including ultraviolet–visible (UV–vis), Fourier-transform infrared (FT-IR), Raman and X-ray photoelectron (XPS) spectroscopy, X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The polyphenolic (flavonoids) and terpenoids rich contents of the miswak RE not only facilitated the reduction of graphene oxide and PdCl2 but also ensured the homogeneous binding of the Pd NPs on graphene, and through stabilization of the surface of SP-HRG-Pd nanocomposites. This also led to the enhanced dispersibility of as synthesized nanocomposites in aqueous solutions. The as-prepared SP-HRG-Pd nanocomposites also demonstrated excellent catalytic activity toward the selective oxidation of aromatic alcohols. Furthermore, in order to study the effect of calcination temperature and concentration of Pd NPs on the catalytic activities of nanocomposites, different samples of SP-HRG-Pd nanocomposites containing different amounts of Pd using various concentrations of Pd precursor were prepared and calcined at various temperatures.

Plant extract of Pulicaria undulata (L.) was used as both reducing agent and stabilizing ligand for the rapid and green synthesis of gold (Au), silver (Ag), and gold–silver (Au–Ag) bimetallic (phase segregated/alloy) nanoparticles (NPs). These nanoparticles with different morphologies were prepared in two hours by stirring corresponding metal precursors in the aqueous solution of the plant extracts at ambient temperature. To infer the role of concentration of plant extract on the composition and morphology of NPs, we designed two different sets of experiments, namely (i) low concentration (LC) and (ii) high concentration (HC) of plant extract. In the case of using low concentration of the plant extract, irregular shaped Au, Ag, or phase segregated Au–Ag bimetallic NPs were obtained, whereas the use of higher concentrations of the plant extract resulted in the formation of spherical Au, Ag, and Au–Ag alloy NPs. The as-prepared Au, Ag, and Au–Ag bimetallic NPs showed morphology and composition dependent catalytic activity for the reduction of 4-nitrophenol (4-NPh) to 4-aminophenol (4-APh) in the presence of NaBH4. The bimetallic Au–Ag alloy NPs showed the highest catalytic activity compared to all other NPs.

Mixed metal nanoparticles (NPs) have attracted significant attention as catalysts for various organic transformations. In this study, we have demonstrated the preparation of nickel–manganese mixed metal oxide NPs doped with X% nano cerium oxide (X = 1, 3, 5 mol%) by a facile co-precipitation technique using surfactant and surfactant free methodologies. The as-synthesized materials were calcined at different temperatures (300 °C, 400 °C, and 500 °C), and were characterized using various spectroscopic techniques, including, FTIR and XRD. SEM analysis, TEM analysis and TGA were employed to evaluate the structural properties of the as-prepared catalyst. These were evaluated for their catalytic behaviour towards the conversion of benzyl alcohol to benzaldehyde, which was used as a model reaction with molecular oxygen as oxidant. Furthermore, the effect of the variation of the percentage of nano ceria doping and the calcination temperature on the performance of as-prepared mixed metal catalysts was also evaluated. The kinetic studies of the reactions performed employing gas chromatographic technique have revealed that the mixed metal oxide catalyst doped with 5% nano ceria displayed excellent catalytc activity, among various catalysts synthesized.

High-intensity ultrasonic waves have great potential for the green synthesis of various nanomaterials under mild conditions and offer an excellent alternative for hazardous chemical methods. Herein a facile approach for the eco-friendly synthesis of Au-ZrO2 nanocatalyst with a high catalytic activity using a facile ultrasonic method is presented. Gold (Au) in the nanosize regime was successfully deposited on the surface of solvothermally synthesized monodispersed ZrO2 nanoparticles (ZrO2 NPs) in a very short period of time (5 min) at room temperature. Spherical shape small size Au nanoparticles that are uniformly dispersed on the surface of ZrO2 nanoparticles were obtained. Notably, in the absence of ZrO2 nanoparticles, HAuCl4 could not be reduced, indicating that nano-sized ZrO2 not only acted as support but also helped to reduce the gold precursor at the surface. The as-prepared Au-ZrO2 nanocatalyst was characterized by various techniques. The Au-ZrO2 nanocatalyst served as a highly efficient reducing catalyst for the reduction of 4-nitrophenol. The reaction time decreased with increasing the amount of catalyst.

This work reports the zirconia (ZrOx) nanoparticles doped MnCO3 catalysts prepared by facile and simple coprecipitation technique and the synthesis of zirconia-manganese carbonate [X% ZrOx–MnCO3] (where X% = 0–7%) catalyst which upon calcination at 400°C is converted to zirconia-manganese dioxide [1% ZrOx–MnO2] and when calcined at 500°C is converted to zirconia-manganic trioxide [1% ZrOx–Mn2O3]. A comparative catalytic study was performed to investigate the catalytic efficiency between carbonate and oxides for the selective oxidation of 1-phenylethanol by using molecular O2 as a clean oxidant. The influence of several parameters such as w/w% of ZrOx, reaction time, calcination temperature, catalyst amount, and reaction temperature has been thoroughly examined using oxidation of 1-phenylethanol as a model substrate. The 1% ZrOx–MnCO3 precalcined at 300°C exhibited the best catalytic efficiency. It was found that ZrOx nanoparticles also play an essential role in enhancing the effectiveness of the catalytic system for the aerobic oxidation of alcohols. Furthermore, the physical and chemical properties of synthesized catalysts were evaluated by microscopic and spectroscopic techniques. An extremely high specific activity of 40 mmol·g−1·h−1 with a 100% conversion of oxidation product and selectivity of >99% was achieved within extremely short reaction time (6 min).

Zinc oxide nanoparticles doped manganese carbonate catalysts [X% ZnOx–MnCO3] (where X = 0–7) were prepared via a facile and straightforward coprecipitation procedure, which upon different calcination treatments yields different manganese oxides, that is, [X% ZnOx–MnO2] and [X% ZnOx–Mn2O3]. A comparative catalytic study was conducted to evaluate the catalytic efficiency between carbonates and oxides for the selective oxidation of secondary alcohols to corresponding ketones using molecular oxygen as a green oxidizing agent without using any additives or bases. The prepared catalysts were characterized by different techniques such as SEM, EDX, XRD, TEM, TGA, BET, and FTIR spectroscopy. The 1% ZnOx–MnCO3 calcined at 300°C exhibited the best catalytic performance and possessed highest surface area, suggesting that the calcination temperature and surface area play a significant role in the alcohol oxidation. The 1% ZnOx–MnCO3 catalyst exhibited superior catalytic performance and selectivity in the aerial oxidation of 1-phenylethanol, where 100% alcohol conversion and more than 99% product selectivity were obtained in only 5 min with superior specific activity (48 mmol·g−1·h−1) and 390.6 turnover frequency (TOF). The specific activity obtained is the highest so far (to the best of our knowledge) compared to the catalysts already reported in the literatures used for the oxidation of 1-phenylethanol. It was found that ZnOx nanoparticles play an essential role in enhancing the catalytic efficiency for the selective oxidation of alcohols. The scope of the oxidation process is extended to different types of alcohols. A variety of primary, benzylic, aliphatic, allylic, and heteroaromatic alcohols were selectively oxidized into their corresponding carbonyls with 100% convertibility without overoxidation to the carboxylic acids under base-free conditions.

Ag2O nanoparticles-doped MnO2 decorated on different percentages of highly reduced graphene oxide (HRG) nanocomposites, i.e., (X%)HRG/MnO2–(1%)Ag2O (where X = 0–7), were fabricated through straight-forward precipitation procedure, and 400 °C calcination, while upon calcination at 300 °C and 500 °C temperatures, it yielded MnCO3 and manganic trioxide (Mn2O3) composites, i.e., [(X%)HRG/MnCO3–(1%)Ag2O] and [(X%)HRG/Mn2O3–(1%)Ag2O], respectively. These nanocomposites have been found to be efficient and very effective heterogeneous catalysts for selective oxidation of secondary alcohols into their respective ketones using O2 as a sole oxidant without adding surfactants or nitrogenous bases. Moreover, a comparative catalytic study was carried out to investigate the catalytic efficiency of the synthesized nanocomposites for the aerobic oxidation of 1-phenylethanol to acetophenone as a substrate reaction. Effects of several factors were systematically studied. The as-prepared nanocomposites were characterized by TGA, XRD, SEM, EDX, HRTEM, BET, Raman, and FTIR. The catalyst with structure (5%)HRG/MnO2–(1%)Ag2O showed outstanding specific activity (16.0 mmol/g·h) with complete conversion of 1-phenylethanol and >99% acetophenone selectivity within short period (25 min). It is found that the effectiveness of the catalyst has been greatly improved after using graphene support. A broad range of alcohols have selectively transformed to desired products with 100% convertibility and no over-oxidation products have been detected. The recycling test of (5%)HRG/MnO2–(1%)Ag2O catalyst for oxidation of 1-phenylethanol suggested no obvious decrease in its performance and selectivity even after five subsequent runs.

The synthesis of Palladium (Pd) nanoparticles by green methods has attracted remarkable attention in recent years because of its superiority above chemical approaches, owing to its low cost and ecological compatibility. In this present work, we describe a facile and environmentally friendly synthesis of Pd nanoparticles (Pd NPs) using an aqueous extract of aerial parts of Origanum vulgare L. (OV) as a bioreductant. This plant is available in many parts of the world as well as in Saudi Arabia and is known to be a rich source of phenolic components, a feature we fruitfully utilized in the synthesis of Pd NPs, using various concentrations of plant extracts. Moreover, the OV extract phytomolecules are not only accountable for the reduction and progression of nanoparticles, but they also act as stabilizing agents, which was confirmed by several characterization methods. The as-synthesized Pd nanoparticles (Pd NPs) were analyzed using ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and thermal gravimetric analysis (TGA). Further, FT-IR study has proven that the OV not merely represents a bioreductant but also functionalizes the nanoparticles. Furthermore, the green synthesized metallic Pd NPs were successfully applied as catalysts for selective oxidation of alcohols.

Microbicidal potential of silver nanoparticles (Ag-NPs) can be drastically improved by improving their solubility or wettability in the aqueous medium. In the present study, we report the synthesis of both green and chemical synthesis of Ag-NPs, and evaluate the effect of the dispersion qualities of as-prepared Ag-NPs from both methods on their antimicrobial activities. The green synthesis of Ag-NPs is carried out by using an aqueous solution of readily available Salvadora persica L. root extract (RE) as a bioreductant. The formation of highly crystalline Ag-NPs was established by various analytical and microscopic techniques. The rich phenolic contents of S. persica L. RE (Miswak) not only promoted the reduction and formation of NPs but they also facilitated the stabilization of the Ag-NPs, which was established by Fourier transform infrared spectroscopy (FT-IR) analysis. Furthermore, the influence of the volume of the RE on the size and the dispersion qualities of the NPs was also evaluated. It was revealed that with increasing the volume of RE the size of the NPs was deteriorated, whereas at lower concentrations of RE smaller size and less aggregated NPs were obtained. During this study, the antimicrobial activities of both chemically and green synthesized Ag-NPs, along with the aqueous RE of S. persica L., were evaluated against various microorganisms. It was observed that the green synthesized Ag-NPs exhibit comparable or slightly higher antibacterial activities than the chemically obtained Ag-NPs.

Polyacrylic acid (PAA) is an important industrial chemical, which has been extensively applied in various fields, including for several biomedical purposes. In this study, we report the synthesis and modification of this polymer with various phenol imides, such as succinimide, phthalimide and 1,8-naphthalimide. The as-synthesized derivatives were used to prepare polymer metal composites by the reaction with Zn+2. These composites were characterized by using various techniques, including NMR, FT-IR, TGA, SEM and DSC. The as-prepared PAA-based composites were further evaluated for their anti-microbial properties against various pathogens, which include both Gram-positive and Gram-negative bacteria and different fungal strains. The synthesized composites have displayed considerable biocidal properties, ranging from mild to moderate activities against different strains tested.