Search

An in situ study to investigate the dynamics of sediment plumes near the release from a deep seabed polymetallic nodule mining preprototype collector vehicle was conducted in the Clarion Clipperton Zone in the Pacific Ocean 4500-m deep. The experiments reveal that the excess density of the released sediment-laden water leads to a low-lying, laterally spreading turbidity current. At the time of measurement, 2 to 8% of the sediment mass were detected 2 m or higher above the seabed and were not observed to settle over several hours, with the remaining 92 to 98% below 2 m and some fraction of that locally deposited. Our results suggest that turbidity current dynamics sets the fraction of sediment remaining suspended and the scale of the subsequent ambient sediment plume. The implications of this process, which is characteristically overlooked in previous modeling efforts, are substantial for plume modeling that will lie at the heart of environmental impact statements for regulatory consideration.

We develop and investigate an advection–diffusion-settling model of deep-sea mining collector plumes, building on the analysis of midwater plumes in Part 1. In the case of collector plumes, deposition plays a predominant role in controlling the mass of sediment in suspension, and thus on setting the extent of the plume. We first discuss the competition between settling, which leads to deposition, and vertical turbulent diffusion, which stretches the plume vertically and reduces deposition. The time evolution of the concentration at the seabed is found to be a highly nonlinear function of time that depends non-trivially on the ratio of diffusion to settling time scales. This has direct implications for the three extent metrics considered, namely the instantaneous area of the seabed where a deposition rate threshold is exceeded, the furthest distance from the discharge where the plume exceeds a concentration threshold and the volume flux of fluid in the water column that ever exceeds a concentration threshold. Unlike the midwater plume, the particle velocity distribution of the sediment has the greatest influence on the extent metrics. The turbulence levels experienced by the plume also markedly affects its extent. Expected variability of turbulence and particle settling velocity yields orders of magnitude changes in the extent metrics.

The evolution of midwater sediment plumes associated with deep-sea mining activities is investigated in the passive-transport phase using a simplified advection–diffusion-settling model. Key metrics that characterize the extent of plumes are defined based on a concentration threshold. Namely, we consider the volume flux of fluid that ever exceeds a concentration threshold, the furthest distance from and maximum depth below the intrusion where the plume exceeds the threshold, and the instantaneous volume of fluid in excess of the threshold. Formulas are derived for the metrics that provide insight into the parameters that most strongly affect the extent of the plume. The model is applied to a reference deep-sea mining scenario around which key parameters are varied. The results provide some sense of scale for deep-sea mining midwater plumes, but more significantly demonstrate the importance of the parameters that influence the evolution of midwater plumes. The model shows that the discharge mass flow rate and the concentration threshold play an equal and opposite role on setting the extent of the plume. Ambient ocean turbulence and the settling velocity distribution of particles play a lesser yet significant role on setting the extent, and can influence different metrics in opposing ways.

Deep-sea polymetallic nodule mining research activity has substantially increased in recent years, but the expected level of environmental impact is still being established. One environmental concern is the discharge of a sediment plume into the midwater column. We performed a dedicated field study using sediment from the Clarion Clipperton Fracture Zone. The plume was monitored and tracked using both established and novel instrumentation, including acoustic and turbulence measurements. Our field studies reveal that modeling can reliably predict the properties of a midwater plume in the vicinity of the discharge and that sediment aggregation effects are not significant. The plume model is used to drive a numerical simulation of a commercial-scale operation in the Clarion Clipperton Fracture Zone. Key takeaways are that the scale of impact of the plume is notably influenced by the values of environmentally acceptable threshold levels, the quantity of discharged sediment, and the turbulent diffusivity in the Clarion Clipperton Fracture Zone.

Deep-sea polymetallic nodule mining research activity has substantially increased in recent years, but the expected level of environmental impact is still being established. One environmental concern is the discharge of a sediment plume into the midwater column. We performed a dedicated field study using sediment from the Clarion Clipperton Fracture Zone. The plume was monitored and tracked using both established and novel instrumentation, including acoustic and turbulence measurements. Our field studies reveal that modeling can reliably predict the properties of a midwater plume in the vicinity of the discharge and that sediment aggregation effects are not significant. The plume model is used to drive a numerical simulation of a commercial-scale operation in the Clarion Clipperton Fracture Zone. Key takeaways are that the scale of impact of the plume is notably influenced by the values of environmentally acceptable threshold levels, the quantity of discharged sediment, and the turbulent diffusivity in the Clarion Clipperton Fracture Zone.

Thesis: S.M. in Ocean Engineering, Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018., Cataloged from PDF version of thesis. Pages 109 and 110 blank., Includes bibliographical references (pages 99-108)., Deep-sea mining activities are expected to commence in the next decade; the International Seabed Authority (ISA) has already issued twenty nine exploration licenses for polymetallic nodules, polymetallic sulphides and polymetallic crusts. The ISA is seeking to approve the exploitation regulations for polymetallic nodules in the next two years, but there are significant research and knowledge gaps that still have to be explored. The discharge of dewatering plumes, the analysis of the effect of vortex-induced vibrations (VIV) on mining risers, and the development of updated and detailed economic models -which are among the most pressing ones - are addressed in this thesis. PLUMEX field studies were conducted in the Pacific Ocean to create and monitor six dewatering plumes. The data obtained from the experiments will be used to validate analytic and numeric plume models that will help to assess the environmental impacts. Additionally, a preliminary VIV analysis of a simple riser configuration was conducted to show the significant impact of VIV on the fatigue life. The results showed that the fatigue life could be reduced to less than one year. Lastly, an independent and thorough economic model is being developed at MIT to allow the simulation of different scenarios and forecast the economic result of a polymetallic nodule exploitation. The ISA will consider the results from the model to determine the royalties and fees that will be paid by future contractors in order to share their benefit with the humankind., by Carlos Muñoz-Royo., S.M. in Ocean Engineering