Search

Monitoring the removal of organic micropollutants (OMPs) in advanced wastewater treatment facilities requires expensive and time-consuming analytical methods that cannot be installed online. Spectroscopic techniques such as fluorescence excitation/emission spectroscopy were demonstrated to offer the potential for monitoring OMPs removal in conventional wastewater treatment plants or ozonation pilots but their application to activated carbon (AC) adsorption processes was only investigated at lab scale and not in real treatment facilities. In this study, indexes from fluorescence emission/excitation matrices (EEMs) were used to find correlations with the removal of 28 OMPs from a large-scale AC pilot in fluidized bed employed for wastewater advanced treatment, as well as from batch experiments. Differences in OMPs removal could be observed depending on the operational conditions (i.e. pilot or batch experiments, contact time, type of AC) and the physico-chemical properties of the molecules. 7 PARAFAC components were derived from the fluorescence EEMs of 60 samples obtained before and after adsorption. Positive correlations were obtained between the removal of fluorescence indexes and most OMPs, and correlation coefficients were much higher than the ones obtained with UV 254 , confirming the interesting potential of fluorescence spectroscopy to accurately monitor adsorption performances at the industrial scale. The highest correlation coefficients were obtained for OMPs having the best removals while the ones that were refractory to adsorption, as well as to interactions with DOM, exhibited weak correlations. These results suggest that interactions between OMPs and fluorescing DOM and their subsequent co-adsorption onto AC were at the origin of the correlations found. Lower correlations were also found for the most biodegradable OMPs, which indicated that the occurrence of biological effects could make the monitoring of these compounds more challenging., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The presence of dissolved organic matter (DOM) in wastewater effluents is recognized as the main factor limiting the adsorption of organic micropollutants (OMPs) onto activated carbon. The degree of the negative effect that DOM, depending on its quality, exerts on OMPs adsorption is still unclear. The influence of the interactions between DOM and OMPs on their removal is also not fully understood. Adsorption isotherms and conventional batch tests were performed in ultra-pure water and in wastewater effluent to study the influence of DOM on the adsorption of 12 OMPs onto powdered activated carbon. Best fit of adsorption pseudo-isotherms was obtained with the Freundlich equation and showed, as expected, that OMPs adsorption was higher in ultra-pure water than in wastewater effluent due to the presence of DOM leading to pore blockage and competition for adsorption sites. LC-OCD analysis revealed that biopolymers and hydrophobic molecules were the most adsorbed fractions while humic acids were not removed after a contact time of either 30 min or 72 h. The presence of DOM had a negative impact on the removal of all OMPs after 30 min of adsorption, but similar removals to ultra-pure water were obtained for 6 OMPs after 72 h of adsorption. This demonstrated that competition between DOM and OMPs for adsorption sites was not a major mechanism as compared to pore blockage, which only slowed down the adsorption and did not prevent it. The charge of OMPs had a clear impact: the adsorption of negatively charged compounds was reduced in the presence of wastewater effluent due to repulsive electrostatic interactions with the adsorbed DOM and the PAC surface. On the other hand, the removal of positively charged compounds was improved. A 24 h pre-equilibrium between OMPs and DOM improved their removal onto PAC, which suggest that OMPs and DOM interacted in solution which decreased the negative effects caused by the presence of DOM, e.g. through co-adsorption of an OMP-DOM complex., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Advanced processes for the removal of organic micropollutants (OMPs) from wastewater effluents include adsorption onto activated carbon, ozonation, or a combination of both processes. The removal of 28 OMPs present in a real wastewater effluent was studied by ozonation coupled to activated carbon adsorption and compared to a sole adsorption. The influence of the specific ozone dose (0.09-1.29 gO 3 /gDOC) and the influence of the powdered activated carbon (PAC) dose (2, 5 and 10 mg/L) were first studied separately. OMPs removal increased with both the specific ozone dose (up to 80% for a dose higher than 0.60 gO 3 /gDOC) and the PAC dose. Ozonation performances decreased in presence of suspended solids, which were converted to dissolved organic carbon. A correction of the specific ozone dose according to the suspended solids levels, in addition to nitrite, should be considered. The influence of ozonation (0.09, 0.22, 0.94 and 1.29 gO 3 /gDOC) on OMPs adsorption was then assessed. OMPs adsorption didn't change at low specific ozone doses but increased at higher specific ozone doses due to a decrease in DOM adsorption and competition with OMPs. At low ozone doses followed by adsorption (0.22 gO 3 /gDOC and 10 mg/L PAC), the two processes appeared complementary as OMPs with a low reactivity toward ozone were well absorbed onto PAC while most OMPs refractory to adsorption were well eliminated by ozone. Improved removals were obtained for all compounds with these selected doses, reaching more than 80% removal for most OMPs while limiting the formation of bromate ion., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Most studies dedicated to organic micropollutants (OMPs) removal from wastewater effluents by adsorption onto activated carbon (AC) only consider a few conventional AC properties. The link between OMPs removal and these properties is often missing, which limits the understanding of the adsorption process and the interpretation of the results. The chemical, physical and textural properties of seven newly commercialized micro-grain activated carbons (μGACs) were determined to assess their influence on the removal of 28 OMPs. Conventional batch tests with wastewater effluent showed that a high percentage of microporous volume (>65%) was detrimental for the removal of 10 OMPs, probably due to a higher blockage of micropores by dissolved organic matter (DOM). The removal of 5 OMPs was correlated with μGACs surface chemistry properties (i.e. charge) which were potentially modified by DOM adsorption or inorganic species, thus favoring the adsorption of positively-charged compounds. A combination of OMPs properties including their charge, hydrophobicity and minimal projection area could explain their removal. Correlations were found between the removal of several OMPs and UV 254 , suggesting that DOM and OMPs interacted with each other or followed similar adsorption mechanisms. A decrease in μGACs particle size had a positive impact on UV 254 removal under continuous-flow conditions in columns representative of a large-scale pilot due to better expansion., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Several advanced treatments, such as ozonation or activated carbon adsorption, are currently considered for the removal of organic micropollutants (OMPs) in wastewater treatment plants (WWTP). However, little is known on the overall performances of a WWTP upgraded with those processes and the benefits provided regarding the elimination of multiple families of OMPs. In this study, 5 sampling campaigns were performed to determine the removal of 48 OMPs in a WWTP followed by an activated carbon pilot. The primary treatment had no effect on OMPs (removals < 20%), whereas the biological treatment removed OMPs that can be easily sorbed onto sludges or biodegraded (>60%). The additional elimination provided by the advanced treatment was not significant (<10%) for OMPs already well removed in the WWTP) but was substantial (>30%) for recalcitrant OMPs. Removals higher than 60% were obtained for all OMPs (except azithromycin and sulfamethoxazole) over the WWTP and the activated carbon pilot. The adsorption conditions (10 g/m 3 fresh activated carbon addition) were not sufficient to achieve the 80% removal targeted in Switzerland for compounds suggested as indicator substances for wastewater treatment. A higher dose of activated carbon or the combination with another advanced treatment should be used to achieve a satisfactory removal of those compounds., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Iron-containing metal-organic frameworks (MOFs) have gradually emerged as environmentally benign alternatives for reducing the levels of environmental contamination because of their advantages, such as readily obtained raw materials with low cost, nontoxic metal source with good biocompatibility, and distinguished physicochemical features e.g., high porosity, framework flexibility, and semiconductor properties. In this study, we reported an innovative strategy for synthesizing an iron-based MOF, MIL-88B, at room temperature. The novelty of this strategy was the use of ethanol as solvent and the pretreatment of dry milling with neither the bulk use of a toxic organic solvent nor the addition of extremely dangerous hydrofluoric acid or strong alkali. The synthesized MIL-88B(Fe) was evaluated as a sorbent for removing arsenate in water and it exhibited high adsorption capacity (156.7 mg g -1 ) at a low dosage. The removal capacity of trace arsenate on MIL-88B(Fe) was 32.3 mg g -1 at a low equilibrium concentration (6.4 μg L -1 ), which satisfied the arsenic threshold for drinking water. The results of Fourier transform infrared and X-ray photoelectron spectroscopy indicated that the As(v) molecules bonded with the oxygen molecules, which were coordinated with FeO clusters in the framework. This work presented the potential use of the up-scaled MIL-88B as an excellent sorbent for purifying arsenate-contaminated water.

Electrospun nanofibrous mats are ideal substrates for metal-organic frameworks (MOFs) crystal deposition because of their specific structural parameters and chemical tenability. In this work, we utilized organic-inorganic hybrid electrospun fibrous mats as support material to study the deposition of various MOF particles. HKUST-1 and MIL-53(Al) were produced through solvothermal method, while ZIF-8 and MIL-88B(Fe) were prepared using microwave-induced heating method. The synthesis procedure for both methods were simple and effective because the hybrid nanofibrous mats showed considerable affinity to MOF particles and could be used without additional modifications. The obtained MOF composites exhibited effective incorporation between MOF particles and the porous substrates. MIL-53(Al) composite was applied as fibrous sorbent and showed enhanced adsorption capacity and removal rate, as well as easier operation, compared with thepowdered sample. Moreover, MIL-53(Al) composite was easier to be regenerated compared with powder form.

Three commercial granular activated carbons (GACs) were studied at laboratory scale with a view to the combined adsorption and biodegradation of PCBs in aquatic sediment. The three GACs, with contrasting physico-chemical characteristics, all show a high adsorption of PCBs and are thus capable of reducing aqueous pollutant concentrations. After a one-month incubation with 'Aroclor 1242'-spiked sediment, the three GACs were each colonized by a multispecies biofilm, although with different amounts of attached bacterial biomass and significantly distinct genetic bacterial communities; interestingly, the highest bacterial biomass was attached to the microporous vegetable GAC. The multispecies biofilms developed on the three GACs were all predominantly composed of Proteobacteria, especially the β-, γ- and δ- subclasses, Chloroflexi and Acidobacteria, with genera previously found in environments containing PCBs or biphenyls, or able to perform cometabolic and direct PCB degradation. After an eight-month incubation under aerobic conditions, it was only the vegetable Picabiol GAC, with its low microporous volume, high total surface area and acidic property, that showed a significant (21%) reduction of tri- through penta-CB. Our results suggest that PCB bio-transformation by the bacterial community attached to the GAC is influenced by GAC's physico-chemical characteristics. Thus, a properly selected GAC could effectively be used to a) sequestrate and concentrate PCB from contaminated aquatic sediment and b) act as a support for efficient PCB degradation by an autochthonous bacterial biofilm., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Recent studies have demonstrated the presence of trace-level pharmaceutically active compounds (PhACs) and endocrine disrupting compounds (EDCs) in a number of finished drinking waters (DWs). Since there is sparse knowledge currently available on the potential effects on human health associated with the chronic exposure to trace levels of these Emerging Contaminants (ECs) through routes such as DW, it is suggested that the most appropriate criterion is a treatment criterion in order to prioritize ECs to be monitored during DW preparation. Hence, only the few ECs showing the lowest removals towards a given DW Treatment (DWT) process would serve as indicators of the overall efficiency of this process and would be relevant for DW quality monitoring. In addition, models should be developed for estimating the removal of ECs in DWT processes, thereby overcoming the practical difficulties of experimentally assessing each compound. Therefore, the present review has two objectives: (1) to provide an overview of the recent scientific surveys on the occurrence of PhACs and EDCs in finished DWs; and (2) to propose the potential of Quantitative-Structure-Activity-Relationship-(QSAR)-like models to rank ECs found in environmental waters, including parent compounds, metabolites and transformation products, in order to select the most relevant compounds to be considered as indicators for monitoring purposes in DWT systems., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

This paper provides a review of recent scientific research on the removal by activated carbon (AC) in drinking water (DW) treatment of 1) two classes of currently unregulated trace level contaminants with potential chronic toxicity-pharmaceutically activate compounds (PhACs) and endocrine disrupting compounds (EDCs); 2) cyanobacterial toxins (CyBTs), which are a group of highly toxic and regulated compounds (as microcystin-LR); and 3) the above mentioned compounds by the hybrid system powdered AC/membrane filtration. The influence of solute and AC properties, as well as the competitive effect from background natural organic matter on the adsorption of such trace contaminants, are also considered. In addition, a number of adsorption isotherm parameters reported for PhACs, EDCs and CyBTs are presented herein. AC adsorption has proven to be an effective removal process for such trace contaminants without generating transformation products. This process appears to be a crucial step in order to minimize PhACs, EDCs and CyBTs in finished DW, hence calling for further studies on AC adsorption removal of these compounds. Finally, a priority chart of PhACs and EDCs warranting further study for the removal by AC adsorption is proposed based on the compounds' structural characteristics and their low removal by AC compared to the other compounds., (Copyright © 2012 Elsevier B.V. All rights reserved.)