Search

The design and development of efficient and electrocatalytic sensitive nickel oxide nanomaterials have attracted attention as they are considered cost-effective, stable, and abundant electrocatalytic sensors. However, although innumerable electrocatalysts have been reported, their large-scale production with the same activity and sensitivity remains challenging. In this study, we report a simple protocol for the gram-scale synthesis of uniform NiO nanoflowers (approximately 1.75 g) via a hydrothermal method for highly selective and sensitive electrocatalytic detection of hydrazine. The resultant material was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. For the production of the modified electrode, NiO nanoflowers were dispersed in Nafion and drop-cast onto the surface of a glassy carbon electrode (NiO NF/GCE). By cyclic voltammetry, it was possible to observe the excellent performance of the modified electrode toward hydrazine oxidation in alkaline media, providing an oxidation overpotential of only +0.08 V vs Ag/AgCl. In these conditions, the peak current response increased linearly with hydrazine concentration ranging from 0.99 to 98.13 μmol L -1 . The electrocatalytic sensor showed a high sensitivity value of 0.10866 μA L μmol -1 . The limits of detection and quantification were 0.026 and 0.0898 μmol L -1 , respectively. Considering these results, NiO nanoflowers can be regarded as promising surfaces for the electrochemical determination of hydrazine, providing interesting features to explore in the electrocatalytic sensor field., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

An amorphous and mesoporous silica/titania (SiTi) material was synthesized by sol-gel method and its surface was modified with gold nanoparticles (AuNP) previously stabilized in a chitosan solution. The presence of small AuNP, with diameter lower than 10 nm was confirmed by transmission electron microscopy (TEM) and UV-Vis spectroscopy. Carbon paste electrodes were prepared to test the electrochemical properties by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in [Fe(CN) 6 ] 3-/4- solution probe whereby the material silica-titania/gold nanoparticles (SiTi/AuNP) showed a huge improvement in the redox peak current and low charge transfer resistance. This electrode presented a good response for both norepinephrine and dopamine by means of square wave voltammetry (SWV) measurements; great sensitivity for both analytes, in an extensive linear range, was obtained. The limits of detection were 0.35 μmol L -1 and 0.57 μmol L -1 for norepinephrine and dopamine, respectively. Additionally, this electrode showed high selectivity for both analytes and it was applied in the simultaneous determination of norepinephrine and dopamine. The sensor was also tested in simulated biological fluids presenting a good recovery. The SWV electrochemical response of norepinephrine was also investigated in the presence of possible interferers such as uric acid, ascorbic acid and glucose and there was no significant interference. The prepared electrode also exhibits good reproducibility for norepinephrine detection, with relative standard deviation of 5.19%., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Phenylurea herbicides are persistent contaminants, which leads their transport to the surface and ground waters, affecting human and aquatic organisms. Different analytical methods have been reported for the detection of phenylureas; however, several of them are expensive, time-consuming, and require complex pretreatment steps. Here, we show a simple method for the simultaneous electrochemical determination of two phenylurea herbicides by differential pulse adsorptive stripping voltammetry (DPAdSV) using a modified platinum/chitosan electrode. The one-step synthesized platinum/chitosan PtNPs/CS was successfully characterized by TEM, XRPD, and FT-IR, and applied through the sensing platform designated as PtNPs/CS/GCE. This bio-based modified electrode is proposed for the first time for the individual and/or simultaneous electrochemical detection of the phenylurea herbicides diuron and isoproturon compounds extensively used worldwide that present a very similar chemical structure. Electrochemical and interfacial characteristics of the modified electrode were evaluated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). It was found that the oxidation mechanism of diuron and isoproturon occurs in two different pathways, with a peak-to-peak definition of ca. 0.15 V. Under differential pulse adsorptive stripping voltammetry (DPAdSV) optimized conditions, the limit of detection (LOD) was estimated as 7 μg L -1 for isoproturon and 20 μg L -1 for diuron (E d  = +0.8 V; t d  = 100 s). The proposed method was successfully applied to the determination of both analytes in river water samples, at three different levels, with a recovery range of 90-110%. The employment of the bio-based sensing platform PtNPs/CS/GCE allows a novel and easy analytical method to the multi-component phenylurea herbicides detection., (Copyright © 2020 Elsevier Inc. All rights reserved.)