Search

2H−MoS2 is an appealing semiconductor because of its Earth‐abundant nature, cheapness, and low toxicity. This material has shown promising catalytic activity for various energy‐related processes, but its use in catalysis for C−C bond forming reactions towards useful organic compounds is still largely unexplored. The lack of examples in organic synthesis is mainly due to the intrinsic difficulties of using bulk 2H−MoS2 (e. g., low surface area), which implies the reliance on high catalytic loadings for obtaining acceptable yields. This makes the optimization process more expensive and tedious. Here, we report the development of a 2H−MoS2‐mediated synthesis of valuable bis(indolyl)methane derivatives, using indoles and benzaldehydes as starting materials. Exploiting the Design of Experiments (DoE) method, we identified the critical parameters affecting the catalytic performance of commercial 2H−MoS2 powder and optimized the reaction conditions. Lastly, we demonstrated that the catalytic system has versatility and good tolerance towards functional group variations of the reagents. [ABSTRACT FROM AUTHOR]

Transition metal chalcogenophosphates of general formula MPX3 have attracted recent interest in the field of 2D materials due to the possibility of tuning their properties upon reaching the 2D limit. Several works address this challenge by dry mechanical exfoliation. However, only a few of them use a scalable approach. In this work, we apply a general chemical protocol to exfoliate MnPS3. The method employs in the first step chemical intercalation and liquid phase exfoliation and in the second step the addition of molecules used as capping agents on the inorganic layers. Therefore, molecules of different nature prompt the quality of the exfoliated material and its stabilization in an aqueous solution, opening the possibility of using these functionalized layers in several fields. Here we illustrate this possibility in electrochemistry. Thus, we show that when polyethylenimine is used as the capping agent, it is possible to reach a compromise between the stability of high quality MnPS3 flakes in aqueous suspension and their optimum performance as an electrocatalytic system for HER activity. [ABSTRACT FROM AUTHOR]

The preparation of 2D stacked layers combining flakes of different nature gives rise to countless numbers of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides, WS2/MoS2, has awakened great interest owing to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here, a suspension of negatively charged MoS2 flakes is mixed with a methanolic solution of a cationic W3S4‐core cluster, giving rise to a homogeneous distribution of the clusters over the layers. In a second step, a calcination of this molecular/2D heterostructure under N2 leads to the formation of clean WS2/MoS2 heterostructures, where the photoluminescence of both counterparts is quenched, proving an efficient interlayer coupling. Thus, this chemical method combines the advantages of a solution approach (simple, scalable, and low‐cost) with the good quality interfaces reached by using more complicated traditional physical methods. [ABSTRACT FROM AUTHOR]

Abstract: Prussian blue (PB) represents a simple, economical, and eco‐friendly system as cathode material for sodium‐ion batteries (SIBs). However, structural problems usually worsen its experimental performance thus motivating the search for alternative synthetic strategies and the formation of composites that compensate these deficiencies. Herein, a straightforward approach for the preparation of PB/MoS2‐based nanocomposites is presented. MoS2 provides a 2D active support for the homogeneous nucleation of porous PB nanocrystals, which feature superior surface areas than those obtained by other methodologies, giving rise to a compact PB shell covering the full flake. The nanocomposite exhibits an excellent performance as cathode for SIBs with discharge capacity values up to 177 mA h g−1 and a specific capacitance of 354 F g−1. These values are even larger for the intercalation of K+ ions (up to 215 mA h g−1, reaching a specific capacitance of 489 F g−1). Compared to similar composites, superior performance can be ascribed to a synergistic effect of the coordination compound with the 2D material. [ABSTRACT FROM AUTHOR]

Controlling the deposition of spin-crossover (SCO) materials constitutes a crucial step for the integration of these bistable molecular systems in electronic devices. Moreover, the influence of functional surfaces, such as 2D materials, can be determinant on the properties of the deposited SCO film. In this work, ultrathin films of the SCO Hofmann-type coordination polymer [Fe(py) 2 {Pt(CN) 4 }] (py = pyridine) onto monolayers of 1T and 2H MoS 2 polytypes are grown. The resulting hybrid heterostructures are characterized by GIXRD, XAS, XPS, and EXAFS to get information on the structure and the specific interactions generated at the interface, as well as on the spin transition. The use of a layer-by-layer results in SCO/2D heterostructures, with crystalline and well-oriented [Fe(py) 2 {Pt(CN) 4 }]. Unlike with conventional Au or SiO 2 substrates, no intermediate self-assembled monolayer is required, thanks to the surface S atoms. Furthermore, it is observed that the higher presence of Fe 3+ in the 2H heterostructures hinders an effective spin transition for [Fe(py) 2 {Pt(CN) 4 }] films thinner than 8 nm. Remarkably, when using 1T MoS 2 , this transition is preserved in films as thin as 4 nm, due to the reducing character of this metallic substrate. These results highlight the active role that 2D materials play as substrates in hybrid molecular/2D heterostructures., (© 2023 The Authors. Small published by Wiley-VCH GmbH.)

2H-MoS 2 is an appealing semiconductor because of its Earth-abundant nature, cheapness, and low toxicity. This material has shown promising catalytic activity for various energy-related processes, but its use in catalysis for C-C bond forming reactions towards useful organic compounds is still largely unexplored. The lack of examples in organic synthesis is mainly due to the intrinsic difficulties of using bulk 2H-MoS 2 (e. g., low surface area), which implies the reliance on high catalytic loadings for obtaining acceptable yields. This makes the optimization process more expensive and tedious. Here, we report the development of a 2H-MoS 2 -mediated synthesis of valuable bis(indolyl)methane derivatives, using indoles and benzaldehydes as starting materials. Exploiting the Design of Experiments (DoE) method, we identified the critical parameters affecting the catalytic performance of commercial 2H-MoS 2 powder and optimized the reaction conditions. Lastly, we demonstrated that the catalytic system has versatility and good tolerance towards functional group variations of the reagents., (© 2023 The Authors. ChemSusChem published by Wiley-VCH GmbH.)

Transition metal chalcogenophosphates of general formula MPX 3 have attracted recent interest in the field of 2D materials due to the possibility of tuning their properties upon reaching the 2D limit. Several works address this challenge by dry mechanical exfoliation. However, only a few of them use a scalable approach. In this work, we apply a general chemical protocol to exfoliate MnPS 3 . The method employs in the first step chemical intercalation and liquid phase exfoliation and in the second step the addition of molecules used as capping agents on the inorganic layers. Therefore, molecules of different nature prompt the quality of the exfoliated material and its stabilization in an aqueous solution, opening the possibility of using these functionalized layers in several fields. Here we illustrate this possibility in electrochemistry. Thus, we show that when polyethylenimine is used as the capping agent, it is possible to reach a compromise between the stability of high quality MnPS 3 flakes in aqueous suspension and their optimum performance as an electrocatalytic system for HER activity.

We present the covalent coating of chemically exfoliated molybdenum disulfide (MoS 2 ) based on the polymerization of functional acryl molecules. The method relies on the efficient diazonium anchoring reaction to provoke the in situ radical polymerization and covalent adhesion of functional coatings. In particular, we successfully implement hydrophobicity on the exfoliated MoS 2 in a direct, fast, and quantitative synthetic approach. The covalent functionalization is proved by multiple techniques including X-ray photoelectron spectroscopy and TGA-MS. This approach represents a simple and general protocol to reach dense and homogeneous functional coatings on 2D materials.

The preparation of 2D stacked layers combining flakes of different nature gives rise to countless numbers of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides, WS 2 /MoS 2 , has awakened great interest owing to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here, a suspension of negatively charged MoS 2 flakes is mixed with a methanolic solution of a cationic W 3 S 4 -core cluster, giving rise to a homogeneous distribution of the clusters over the layers. In a second step, a calcination of this molecular/2D heterostructure under N 2 leads to the formation of clean WS 2 /MoS 2 heterostructures, where the photoluminescence of both counterparts is quenched, proving an efficient interlayer coupling. Thus, this chemical method combines the advantages of a solution approach (simple, scalable, and low-cost) with the good quality interfaces reached by using more complicated traditional physical methods., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)