Search

Road traffic is one of the main sources of pollution in modern cities. If there is a desire to move towards healthier cities, it may be necessary to modify the current model of mobility. The SARS-CoV-2 pandemic, together with the measures applied by most governments in the world to control the mobility of citizens, offered a unique opportunity to assess the changes in pollution levels after a drastic reduction in road traffic. In this study, air and noise pollution levels and road traffic flow were analyzed in the city of Cáceres, Spain, before and during the state of emergency imposed by the Spanish government. The values obtained were compared with the quality limits established by both the Spanish government and the World Health Organization (WHO). A traffic noise prediction model has been employed to evaluate the acoustic impact resulting from the reduction in traffic flow. As a result of this study, it was found that air pollution was indeed reduced due to the mobility restrictions imposed to control the pandemic, but that the WHO's recommendations for the values of the day-evening-night noise indicator (L den ) and the night-time noise indicator (L n ) for road traffic noise, which should not be exceeded, were not met. These findings highlight the need to review current urban mobility models if the WHO's recommendations are to be reached with regard to reducing the effects of exposure of the population to urban noise., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Research combining the measurement of objective variables with surveys of people's perception of noise on city streets is useful in terms of understanding the impact of urban noise on the population and improving the environment. Although previous investigations have analysed the factors that may influence the noise annoyance of citizens, it is usually considered as a global aspect. This paper presents research based on in situ surveys and objective variables (urban, meteorological and noise indicators) to evaluate some specific effects of noise on pedestrians in urban environments where road traffic is the main source of sound. The results show significant relationships of the effects of noise and perceptions of how noisy urban environments are with variables such as building height, road category and temperature, with correlation coefficients ranging from 0.37 to 0.64. Significant correlations between these subjective variables and the acoustic variables were also found, with explanations of variability that reached values of up to 50 %. A multivariate analysis revealed that both urban variables (especially the category of street) and environmental variables can be an alternative or a complement to models predicting the effects and perception of environmental noise based only on acoustic variables., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The effect of road traffic noise in urban environments is an issue of social and scientific interest, due to its public health and economic impacts. Scientific literature showed a decrease in the level of tyre/road noise generated as temperature increases, but usually under standardised traffic conditions in non-urban environments. Based on a wide network for the hourly monitoring of road traffic flow, air temperature and noise levels across the city of Madrid (Spain), this work proposes and applies a new experimental methodology for studying the dependence of urban road traffic noise on temperature. This study was conducted under real-world traffic conditions involving a wide variability in urban configurations and in the type and state of preservation of vehicles, tires and pavements. From the analysis of data for a whole year, a time interval was identified (from Tuesday to Thursday and between 8 a.m. and 8 p.m.) in which the variability in road traffic flow for the whole city of Madrid was stable enough to allow for a linear regression study between temperature and noise levels from urban road traffic. The relationships found were highly significant (p ≤ 0.001) for data from all the noise monitoring stations, with values of higher than 20% and up to 42% for the explanation of the variability in the measured noise levels by temperature at most of the measurement points. The values of the slope coefficients at the noise monitoring stations ranged from -0.036 to -0.125 dB/°C, with an average value of -0.090 ± 0.011 dB/°C. These results are within the range of values reported in the scientific literature for experimental tests conducted under conditions of controlled or free-flowing traffic., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Noise levels measured in 27 cities with different areas (from 0.6 km 2 to 59.27 km 2 ) and populations (from approximately 2000 to 70,000 inhabitants) were compared with respect to five different urban characteristics (population, area, total street length, density, and linear density). Comparisons were conducted for both overall city noise levels and noise registered on five types of roads with different functionality using the Categorisation Method. The results showed that four of the five cities' characteristics presented a significant correlation with the noise levels (all except for density). The calculated correlations were better for noise levels in the different categories than the overall noise values, with higher explained variability on the streets with more traffic. Therefore, the road categorisation method can be used not only to assess the noise variations within cities, but also to better explain the effect of noise on the analysed city characteristics. The results of the calculated relationships enable the estimation of noise levels both currently and in future urban developments of noise values on different types of streets., (Copyright © 2021 Elsevier Inc. All rights reserved.)

The European Noise Directive proposes using strategic noise maps as tools to assess populations affected by environmental noise. It recommends using computational methods instead of in situ measurements when possible. A sound source's emission power is an important factor in the calculation of noise indicators. For traffic noise, this parameter is usually defined based on vehicle flow considering an emission spectrum that depends on the type of vehicle and its speed. This study analysed the possibility of using the categorisation method to propose an alternative method of defining a sound source's emission power to develop noise maps. This was accomplished using previously published values of the emission power per unit length. Another method is also proposed that estimates traffic flows. To verify their estimation capacity, the results of both methods were compared with the values obtained from in situ measurements. The results demonstrated similar uncertainties in both methods and were in the range of expected average uncertainties compared to the results obtained by calculating a noise map with the measured experimental values. In particular, for the differences between calculations and measurements, in absolute values, the mean uncertainties were approximately 2 dBA in estimating different long-term noise indicators. For the differences, the mean of the uncertainties obtained via the categorisation method did not present significant differences for the null value for all the analysed noise indicators. Street stratification is a rapid and low-cost approach for road traffic noise mapping without increasing uncertainties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Noise pollution is a major environmental problem due to its impact on human health and implications for other spheres of society. Since road traffic is the main source of noise pollution, the use of measurement methodologies to accurately determine the environmental noise levels to which the façades of buildings in cities are exposed is an important issue. This paper presents an experimental study in urban environments that uses different configurations to evaluate the influence of the position of the microphone and the parking lanes on the levels of road traffic noise to which the population is exposed. In urban settings in which sound waves propagate without obstacles between the lanes of traffic and the receivers, broadband results for the differences between noise levels measured by microphones placed at heights of 4.0 and 1.5 m showed a significant increase with an increase in the distance between the microphone and sound source of between -0.8 and 0.9 dBA over a range from 2 to 8 m. This difference between the two microphones was greater at points where a lane of parked vehicles was located between the road traffic lanes and the receivers were placed near the façades of building. At the same heights, the broadband difference in sound levels ranged from 2.7 to 4.5 dBA. This acoustic shielding effect due to the presence of parked vehicles started to be relevant in the 250 Hz band and increased progressively with frequency. Taking into account these experimental results and the recommendations in the European Noise Directive, it would be important to apply corrections to sound indicators for road traffic noise that are related to the height of the microphone. Making a distinction between urban configurations with and without lines of parked vehicles between the microphone and the road traffic lanes would be advisable., (Copyright © 2020 Elsevier Inc. All rights reserved.)

The use of strategic noise maps as a means for estimating population exposure to environmental noise and defining action plans to mitigate its effects on human health has become a reality since the publication of the European Noise Directive. In this context, it is known that some differences can be found between the values obtained for sound indicators through simulation and measurements due to different causes. One of these factors is the presence of elements in urban environments not currently considered in calculation methods but certainly present in validation measurements. This paper presents an assessment of the acoustic shielding effect due to parked vehicles on urban streets using computational methods. First of all, a process of validation of the software model by means of different simulation methods and in situ measurements was carried out. Then, a study was developed varying different variables related to urban planning and noise modelling, as well as considering different typologies of real streets according to a categorisation method. Broadband results show that this shielding effect can be significant in common configurations in urban environments, even to receiver heights of 4 m considered as a reference in strategic noise maps. The magnitude of this effect varied depending on the distances between the building façade, parked vehicles and sound sources, as well as the receiver height. Differences up to 4 dBA in sound levels were found in several configurations between situations without and with cars parked at 4 m, although in some specific cases it reached up to 8 dBA. Therefore, results of this study indicated that parking lane shielding effect should be considered in calculations and validation measurements for strategic noise maps in order to obtain an adequate estimation of population exposure to road traffic noise., (Copyright © 2020 Elsevier Inc. All rights reserved.)