Search

PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.

Fuelled by space photometry, asteroseismology is vastly benefitting the study of cool main-sequence stars, which exhibit convection-driven solar-like oscillations. Even so, the tiny oscillation amplitudes in K dwarfs continue to pose a challenge to space-based asteroseismology. A viable alternative is offered by the lower stellar noise over the oscillation timescales in Doppler observations. In this letter we present the definite detection of solar-like oscillations in the bright K5 dwarf $\epsilon$ Indi based on time-intensive observations collected with the ESPRESSO spectrograph at the VLT, thus making it the coolest seismic dwarf ever observed. We measured the frequencies of a total of 19 modes of degree $\ell=0$--2 along with $\nu_{\rm max}=5305\pm176\:{\rm \mu Hz}$ and $\Delta\nu=201.25\pm0.16\:{\rm \mu Hz}$. The peak amplitude of radial modes is $2.6\pm0.5\:{\rm cm\,s^{-1}}$, or a mere ${\sim} 14\%$ of the solar value. Measured mode amplitudes are ${\sim} 2$ times lower than predicted from a nominal $L/M$ scaling relation and favour a scaling closer to $(L/M)^{1.5}$ below ${\sim} 5500\:{\rm K}$, carrying important implications for our understanding of the coupling efficiency between pulsations and near-surface convection in K dwarfs. This detection conclusively shows that precise asteroseismology of cool dwarfs is possible down to at least the mid-K regime using next-generation spectrographs on large-aperture telescopes, effectively opening up a new domain in observational asteroseismology., Comment: Accepted for publication in Astronomy & Astrophysics Letters

Asteroseismology is playing an increasingly important role in the characterization of red-giant host stars and their planetary systems. Here, we conduct detailed asteroseismic modeling of the evolved red-giant branch (RGB) hosts KOI-3886 and $\iota$ Draconis, making use of end-of-mission Kepler (KOI-3886) and multi-sector TESS ($\iota$ Draconis) time-series photometry. We also model the benchmark star KIC 8410637, a member of an eclipsing binary, thus providing a direct test to the seismic determination. We test the impact of adopting different sets of observed modes as seismic constraints. Inclusion of $\ell=1$ and 2 modes improves the precision on the stellar parameters, albeit marginally, compared to adopting radial modes alone, with $1.9$-$3.0\%$ (radius), $5$-$9\%$ (mass), and $19$-$25\%$ (age) reached when using all p-dominated modes as constraints. Given the very small spacing of adjacent dipole mixed modes in evolved RGB stars, the sparse set of observed g-dominated modes is not able to provide extra constraints, further leading to highly multimodal posteriors. Access to multi-year time-series photometry does not improve matters, with detailed modeling of evolved RGB stars based on (lower-resolution) TESS data sets attaining a precision commensurate with that based on end-of-mission Kepler data. Furthermore, we test the impact of varying the atmospheric boundary condition in our stellar models. We find mass and radius estimates to be insensitive to the description of the near-surface layers, at the expense of substantially changing both the near-surface structure of the best-fitting models and the values of associated parameters like the initial helium abundance, $Y_{\rm i}$. Attempts to measure $Y_{\rm i}$ from seismic modeling of red giants may thus be systematically dependent on the choice of atmospheric physics., Comment: Accepted for publication in The Astronomical Journal (AJ)

The transition between convective and radiative stellar regions is still not fully understood. The sharp variations in sound speed located in these transition regions give rise to a signature in specific seismic indicators, opening the possibility to constrain the physics of convection to radiation transition. Among those seismic indicators, the ratios of the small to large frequency separation for $l=0$ and $1$ modes ($r_{010}$) were shown to be particularly efficient to probe these transition regions. Interestingly, in the Kepler Legacy F-type stars, the oscillatory signatures left in the $r_{010}$ ratios by the sharp sound-speed variation have unexpected large amplitudes that still need to be explained. We show that the signature of the bottom of the convective envelope is amplified in the ratios $r_{010}$ by the frequency dependence of the amplitude compared to the signal seen in the frequencies themselves or the second differences. We find that among the different options of physical input investigated here, large amplitude signatures can only be obtained when convective penetration of the surface convective zone into the underlying radiative region is taken into account. In this case and even for amplitudes as large as those observed in F-type stars, the oscillating signature in the ratios can only be detected when the convective envelope is deep enough. This deep extension of the convective envelope causes doubt that the origin of the large amplitudes is due to penetrative convection as it is modelled here or implies that current stellar modelling (without penetrative convection) leads to an underestimation of the size of convective envelopes. In any case, studying the glitch signatures of a large number of oscillating F-type stars opens the possibility to constrain the physics of the stellar interior in these regions., Comment: 19 pages, 12 figures, accepted for publication in A&A

The Gaia-ESO Public Spectroscopic Survey is an ambitious project designed to obtain astrophysical parameters and elemental abundances for 100,000 stars, including large representative samples of the stellar populations in the Galaxy, and a well-defined sample of 60 (plus 20 archive) open clusters. We provide internally consistent results calibrated on benchmark stars and star clusters, extending across a very wide range of abundances and ages. This provides a legacy data set of intrinsic value, and equally a large wide-ranging dataset that is of value for homogenisation of other and future stellar surveys and Gaia's astrophysical parameters. This article provides an overview of the survey methodology, the scientific aims, and the implementation, including a description of the data processing for the GIRAFFE spectra. A companion paper (arXiv:2206.02901) introduces the survey results. Gaia-ESO aspires to quantify both random and systematic contributions to measurement uncertainties. Thus all available spectroscopic analysis techniques are utilised, each spectrum being analysed by up to several different analysis pipelines, with considerable effort being made to homogenise and calibrate the resulting parameters. We describe here the sequence of activities up to delivery of processed data products to the ESO Science Archive Facility for open use. The Gaia-ESO Survey obtained 202,000 spectra of 115,000 stars using 340 allocated VLT nights between December 2011 and January 2018 from GIRAFFE and UVES. The full consistently reduced final data set of spectra was released through the ESO Science Archive Facility in late 2020, with the full astrophysical parameters sets following in 2022., Comment: 38 pages. A&A in press

In the last 15 years different ground-based spectroscopic surveys have been started (and completed) with the general aim of delivering stellar parameters and elemental abundances for large samples of Galactic stars, complementing Gaia astrometry. Among those surveys, the Gaia-ESO Public Spectroscopic Survey (GES), the only one performed on a 8m class telescope, was designed to target 100,000 stars using FLAMES on the ESO VLT (both Giraffe and UVES spectrographs), covering all the Milky Way populations, with a special focus on open star clusters. This article provides an overview of the survey implementation (observations, data quality, analysis and its success, data products, and releases), of the open cluster survey, of the science results and potential, and of the survey legacy. A companion article (Gilmore et al.) reviews the overall survey motivation, strategy, Giraffe pipeline data reduction, organisation, and workflow. The GES has determined homogeneous good-quality radial velocities and stellar parameters for a large fraction of its more than 110,000 unique target stars. Elemental abundances were derived for up to 31 elements for targets observed with UVES. Lithium abundances are delivered for about 1/3 of the sample. The analysis and homogenisation strategies have proven to be successful; several science topics have been addressed by the Gaia-ESO consortium and the community, with many highlight results achieved. The final catalogue has been released through the ESO archive at the end of May 2022, including the complete set of advanced data products. In addition to these results, the Gaia-ESO Survey will leave a very important legacy, for several aspects and for many years to come., Comment: Accepted for publication in Astronomy and Astrophysics. 30 pages, 30 figures, 4 tables

The unprecedented quality of the asteroseismic data of solar-type stars made available by space missions such as NASA's Kepler telescope are making it possible to explore stellar interior structures. This offers possibilities of constraining stellar core properties (such as core sizes, abundances, and physics) paving the way for improving the precision of the inferred stellar ages. We employ 16 Cyg A and B as our benchmark stars for an asteroseismic study in which we present a novel approach aimed at selecting from a sample of acceptable stellar models returned from Forward Modelling techniques, down to the ones that better represent the core of each star. This is accomplished by comparing specific properties of the observed frequency ratios for each star to the ones derived from the acceptable stellar models. We demonstrate that in this way we are able to constrain further the hydrogen mass fraction in the core, establishing the stars' precise evolutionary states and ages. The ranges of the derived core hydrogen mass fractions are [0.01 - 0.06] and [0.12 - 0.19] for 16 Cyg A and B, respectively, and, considering that the stars are coeval, the age and metal mass fraction parameters span the region [6.4 - 7.4] Gyr and [0.023 - 0.026], respectively. In addition, our findings show that using a single helium-to-heavy element enrichment ratio, ($\Delta Y/\Delta Z$), when forward modelling the 16 Cyg binary system, may result in a sample of acceptable models that do not simultaneously fit the observed frequency ratios, further highlighting that such an approach to the definition of the helium content of the star may not be adequate in studies of individual stars., Comment: 13 pages, 8 figures, and 5 tables. Accepted for publication in MNRAS

Asteroseismology is a powerful tool to infer fundamental stellar properties. The use of these asteroseismic-inferred properties in a growing number of astrophysical contexts makes it vital to understand their accuracy. Consequently, we performed a hare-and-hounds exercise where the hares simulated data for 6 artificial main-sequence stars and the hounds inferred their properties based on different inference procedures. To mimic a pipeline such as that planned for the PLATO mission, all hounds used the same model grid. Some stars were simulated using the physics adopted in the grid, others a different one. The maximum relative differences found (in absolute value) between the inferred and true values of the mass, radius, and age were 4.32 per cent, 1.33 per cent, and 11.25 per cent, respectively. The largest systematic differences in radius and age were found for a star simulated assuming gravitational settling, not accounted for in the model grid, with biases of -0.88 per cent (radius) and 8.66 per cent (age). For the mass, the most significant bias (-3.16 per cent) was found for a star with a helium enrichment ratio outside the grid range. Moreover, a ~7 per cent dispersion in age was found when adopting different prescriptions for the surface corrections or shifting the classical observations by $\pm 1\sigma$. The choice of the relative weight given to the classical and seismic constraints also impacted significantly the accuracy and precision of the results. Interestingly, only a few frequencies were required to achieve accurate results on the mass and radius. For the age the same was true when at least one $l=2$ mode was considered., Comment: Accepted for publication in the Monthly Notices of the Royal Astronomical Society

We present an analysis of the first 20-second cadence light curves obtained by the TESS space telescope during its extended mission. We find a precision improvement of 20-second data compared to 2-minute data for bright stars when binned to the same cadence (~10-25% better for T<~8 mag, reaching equal precision at T~13 mag), consistent with pre-flight expectations based on differences in cosmic ray mitigation algorithms. We present two results enabled by this improvement. First, we use 20-second data to detect oscillations in three solar analogs (gamma Pav, zeta Tuc and pi Men) and use asteroseismology to measure their radii, masses, densities and ages to ~1%, ~3%, ~1% and ~20% respectively, including systematic errors. Combining our asteroseismic ages with chromospheric activity measurements we find evidence that the spread in the activity-age relation is linked to stellar mass and thus convection-zone depth. Second, we combine 20-second data and published radial velocities to re-characterize pi Men c, which is now the closest transiting exoplanet for which detailed asteroseismology of the host star is possible. We show that pi Men c is located at the upper edge of the planet radius valley for its orbital period, confirming that it has likely retained a volatile atmosphere and that the "asteroseismic radius valley" remains devoid of planets. Our analysis favors a low eccentricity for pi Men c (<0.1 at 68% confidence), suggesting efficient tidal dissipation (Q/k <~ 2400) if it formed via high-eccentricity migration. Combined, these early results demonstrate the strong potential of TESS 20-second cadence data for stellar astrophysics and exoplanet science., Comment: 17 pages (excluding references), 13 figures, 6 tables; accepted for publication in AJ. Data and scripts to reproduce results are archived at https://zenodo.org/record/5555456

We present a catalogue of homogeneous determined chromospheric emission (CE), stellar atmospheric parameters and ages for 1,674 FGK main sequence (MS), subgiant, and giant stars. The analysis of CE level and variability is also performed. We measured CE in the CaII lines using more than 180,000 high-resolution spectra from the HARPS spectrograph, as compiled in the AMBRE project, obtained between 2003 and 2019. We converted the fluxes to bolometric and photospheric corrected chromospheric emission ratio, $R'_\text{HK}$. Stellar atmospheric parameters $T_\text{eff}$, $\log g$, and [Fe/H] were retrieved from the literature or determined using an homogeneous method. $M_\star$, $R_\star$, and ages were determined from isochrone fitting. We analysed the CE distribution for the different luminosity classes and spectral types and confirmed the existence of the very inactive stars (VIS) and very active stars (VAS) populations at $\log R'_\text{HK}< -5.1$ and $> -4.2$ dex, respectively. We found indications that the VIS population is composed mainly of subgiant and giant stars and that $\log R'_\text{HK}= -5.1$ dex marks a transition in stellar evolution. There appears to be at least three regimes of variability, for inactive, active and very active stars, with the inactive and active regimes separated by a diagonal Vaughan-Preston gap. We show that stars with low activity levels do not necessarily have low variability. In the case of K dwarfs which show high CE variability, inactive and active stars have similar levels of activity variability. This means that activity levels alone are not enough to infer about the activity variability of a star. We also explained the shape of the VP gap observed in the distribution of CE by using the CE variability-level diagram. In the CE variability-level diagram, the Sun is located in the high variability region of the inactive MS stars zone. (Abridged), Comment: 24 pages, 24 figures, Accepted for publication in A&A. Full catalogue will be available in CDS after publication

Observations of metal absorption systems in the spectra of distant quasars allow to constrain a possible variation of the fine-structure constant throughout the history of the Universe. Such a test poses utmost demands on the wavelength accuracy and previous studies were limited by systematics in the spectrograph wavelength calibration. A substantial advance in the field is therefore expected from the new ultra-stable high-resolution spectrograph Espresso, recently installed at the VLT. In preparation of the fundamental physics related part of the Espresso GTO program, we present a thorough assessment of the Espresso wavelength accuracy and identify possible systematics at each of the different steps involved in the wavelength calibration process. Most importantly, we compare the default wavelength solution, based on the combination of Thorium-Argon arc lamp spectra and a Fabry-P\'erot interferometer, to the fully independent calibration obtained from a laser frequency comb. We find wavelength-dependent discrepancies of up to 24m/s. This substantially exceeds the photon noise and highlights the presence of different sources of systematics, which we characterize in detail as part of this study. Nevertheless, our study demonstrates the outstanding accuracy of Espresso with respect to previously used spectrographs and we show that constraints of a relative change of the fine-structure constant at the $10^{-6}$ level can be obtained with Espresso without being limited by wavelength calibration systematics., Comment: 27 pages, accepted for publication in A&A

Detailed understanding of stellar physics is essential towards a robust determination of stellar properties (e.g. radius, mass, and age). Among the vital input physics used in the modelling of solar-type stars which remain poorly constrained, is the initial helium abundance. To this end, when constructing stellar model grids, the initial helium abundance is estimated either (i) by using the semi-empirical helium-to-heavy element enrichment ratio, (${\Delta Y}/{\Delta Z}$), anchored to the standard Big Bang Nucleosynthesis value or (ii) by setting the initial helium abundance as a free variable. Adopting 35 low-mass, solar-type stars with multi-year Kepler photometry from the asteroseismic "LEGACY" sample, we explore the systematic uncertainties on the inferred stellar parameters (i.e., radius, mass, and age) arising from the treatment of the initial helium abundance in stellar model grids . The stellar masses and radii derived from grids with free initial helium abundance are lower compared to those from grids based on a fixed ${\Delta Y}/{\Delta Z}$ ratio. We find the systematic uncertainties on mean density, radius, mass, and age arising from grids which employ a fixed value of ${\Delta Y}/{\Delta Z}$ and those with free initial helium abundance to be $\sim$ 0.9%, $\sim$ 2%, $\sim$ 5% and $\sim$ 29%, respectively. We report that the systematic uncertainties on the inferred masses and radii arising from the treatment of initial helium abundance in stellar grids lie within the expected accuracy limits of ESA's PLATO, although this is not the case for the age., Comment: 12 pages, 10 figures, and 6 tables. Accepted for publication in MNRAS

ESPRESSO is the new high-resolution spectrograph of ESO's Very-Large Telescope (VLT). It was designed for ultra-high radial-velocity precision and extreme spectral fidelity with the aim of performing exoplanet research and fundamental astrophysical experiments with unprecedented precision and accuracy. It is able to observe with any of the four Unit Telescopes (UT) of the VLT at a spectral resolving power of 140,000 or 190,000 over the 378.2 to 788.7 nm wavelength range, or with all UTs together, turning the VLT into a 16-m diameter equivalent telescope in terms of collecting area, while still providing a resolving power of 70,000. We provide a general description of the ESPRESSO instrument, report on the actual on-sky performance, and present our Guaranteed-Time Observation (GTO) program with its first results. ESPRESSO was installed on the Paranal Observatory in fall 2017. Commissioning (on-sky testing) was conducted between December 2017 and September 2018. The instrument saw its official start of operations on October 1st, 2018, but improvements to the instrument and re-commissioning runs were conducted until July 2019. The measured overall optical throughput of ESPRESSO at 550 nm and a seeing of 0.65 arcsec exceeds the 10% mark under nominal astro-climatic conditions. We demonstrate a radial-velocity precision of better than 25 cm/s during one night and 50 cm/s over several months. These values being limited by photon noise and stellar jitter show that the performanceis compatible with an instrumental precision of 10 cm/s. No difference has been measured across the UTs neither in throughput nor RV precision. The combination of the large collecting telescope area with the efficiency and the exquisite spectral fidelity of ESPRESSO opens a new parameter space in RV measurements, the study of planetary atmospheres, fundamental constants, stellar characterisation and many other fields., Comment: 26 pages, 28 figures

The bright star $\pi$ Men was chosen as the first target for a radial velocity follow-up to test the performance of ESPRESSO, the new high-resolution spectrograph at the ESO's Very-Large Telescope (VLT). The star hosts a multi-planet system (a transiting 4 M$_\oplus$ planet at $\sim$0.07 au, and a sub-stellar companion on a $\sim$2100-day eccentric orbit) which is particularly appealing for a precise multi-technique characterization. With the new ESPRESSO observations, that cover a time span of 200 days, we aim to improve the precision and accuracy of the planet parameters and search for additional low-mass companions. We also take advantage of new photometric transits of $\pi$ Men c observed by TESS over a time span that overlaps with that of the ESPRESSO follow-up campaign. We analyse the enlarged spectroscopic and photometric datasets and compare the results to those in the literature. We further characterize the system by means of absolute astrometry with Hipparcos and Gaia. We used the spectra of ESPRESSO for an independent determination of the stellar fundamental parameters. We present a precise characterization of the planetary system around $\pi$ Men. The ESPRESSO radial velocities alone (with typical uncertainty of 10 cm/s) allow for a precise retrieval of the Doppler signal induced by $\pi$ Men c. The residuals show an RMS of 1.2 m/s, and we can exclude companions with a minimum mass less than $\sim$2 M$_\oplus$ within the orbit of $\pi$ Men c). We improve the ephemeris of $\pi$ Men c using 18 additional TESS transits, and in combination with the astrometric measurements, we determine the inclination of the orbital plane of $\pi$ Men b with high precision ($i_{b}=45.8^{+1.4}_{-1.1}$ deg). This leads to the precise measurement of its absolute mass $m_{b}=14.1^{+0.5}_{-0.4}$ M$_{Jup}$, and shows that the planetary orbital planes are highly misaligned., Comment: Accepted for publication on A&A

We characterized the transiting planetary system orbiting the G2V star K2-38 using the new-generation echelle spectrograph ESPRESSO. We carried out a photometric analysis of the available K2 photometric light curve of this star to measure the radius of its two known planets. Using 43 ESPRESSO high-precision radial velocity measurements taken over the course of 8 months along with the 14 previously published HIRES RV measurements, we modeled the orbits of the two planets through a MCMC analysis, significantly improving their mass measurements. Using ESPRESSO spectra, we derived the stellar parameters, $T_{\rm eff}$=5731$\pm$66, $\log g$=4.38$\pm$0.11~dex, and $[Fe/H]$=0.26$\pm$0.05~dex, and thus the mass and radius of K2-38, $M_{\star}$=1.03 $^{+0.04}_{-0.02}$~M$_{\oplus}$ and $R_{\star}$=1.06 $^{+0.09}_{-0.06}$~R$_{\oplus}$. We determine new values for the planetary properties of both planets. We characterize K2-38b as a super-Earth with $R_{\rm P}$=1.54$\pm$0.14~R$_{\rm \oplus}$ and $M_{\rm p}$=7.3$^{+1.1}_{-1.0}$~M$_{\oplus}$, and K2-38c as a sub-Neptune with $R_{\rm P}$=2.29$\pm$0.26~R$_{\rm \oplus}$ and $M_{\rm p}$=8.3$^{+1.3}_{-1.3}$~M$_{\oplus}$. We derived a mean density of $\rho_{\rm p}$=11.0$^{+4.1}_{-2.8}$~g cm$^{-3}$ for K2-38b and $\rho_{\rm p}$=3.8$^{+1.8}_{-1.1}$~g~cm$^{-3}$ for K2-38c, confirming K2-38b as one of the densest planets known to date. The best description for the composition of K2-38b comes from an iron-rich Mercury-like model, while K2-38c is better described by a rocky model with a H2 envelope. The maximum collision stripping boundary shows how giant impacts could be the cause for the high density of K2-38b. The irradiation received by each planet places them on opposite sides of the radius valley. We find evidence of a long-period signal in the radial velocity time-series whose origin could be linked to a 0.25-3~M$_{\rm J}$ planet or stellar activity., Comment: 16 pages, 14 figures

There is renewed interest in using advanced techniques to characterize ancient Roman concrete. In the present work, samples were drilled from the "Hospitium" in Pompeii and were analyzed by synchrotron microtomography (uCT) and neutron radiography to study how the microstructure, including the presence of induced cracks, affects their water adsorption. The water distribution and absorptivity were quantified by neutron radiography. The 3D crack propagation, pore size distribution and orientation, tortuosity, and connectivity were analyzed from uCT results using advanced imaging methods. The concrete characterization also included classical methods (e.g., differential thermal-thermogravimetric, X-ray diffractometry, and scanning electron microscopy). Ductile fracture patterns were observed once cracks were introduced. When compared to Portland cement mortar/concrete, Pompeii samples had relatively high porosity, low connectivity, and similar coefficient of capillary penetration. In addition, the permeability was predicted from models based on percolation theory and the pore structure data to evaluate the fluid transport properties.

We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC analysis on the time series of the radial velocity and full-width half maximum of the cross-correlation function to model the planetary and stellar signals present in the data, applying Gaussian process regression to deal with stellar activity. We confirm the presence of Proxima b independently in the ESPRESSO data. The ESPRESSO data on its own shows Proxima b at a period of 11.218 $\pm$ 0.029 days, with a minimum mass of 1.29 $\pm$ 0.13 Me. In the combined dataset we measure a period of 11.18427 $\pm$ 0.00070 days with a minimum mass of 1.173 $\pm$ 0.086 Me. We find no evidence of stellar activity as a potential cause for the 11.2 days signal. We find some evidence for the presence of a second short-period signal, at 5.15 days with a semi-amplitude of merely 40 cm/s. If caused by a planetary companion, it would correspond to a minimum mass of 0.29 $\pm$ 0.08 Me. We find that the FWHM of the CCF can be used as a proxy for the brightness changes and that its gradient with time can be used to successfully detrend the radial velocity data from part of the influence of stellar activity. The activity-induced radial velocity signal in the ESPRESSO data shows a trend in amplitude towards redder wavelengths. Velocities measured using the red end of the spectrograph are less affected by activity, suggesting that the stellar activity is spot-dominated. The data collected excludes the presence of extra companions with masses above 0.6 Me at periods shorter than 50 days., Comment: 25 pages, 26 figures

Roman-era concrete is the iconic embodiment of long-term physicochemical resilience. We investigated the basis of this behavior across scales of observations by coupling time-lapse (4-D) tomographic imaging of macroscopic mechanical stressing with structural microscopy and chemical spectroscopy on Roman marine concrete (RMC) from ancient harbors in Italy and Israel. Stress-strain measurements revealed that RMC creeps and exhibits a ductile deformation mode. The permeability of specimens from Italy were found to be low due to increased matrix-aggregate bonding. Structural and chemical imaging shows the presence of well-developed sulfur-rich, fibrous minerals that are intertwined and embedded in a crossbred matrix having the chemical traits of both a calcium-aluminum-silicate-hydrate and a geopolymer. This latter likely reflects the ultra-alkaline volcanic nature of the primary source materials. We hypothesize that the fine interweave of sulfur-rich fibers within this crossbred matrix enhances aggregate bonding, which altogether contributes to the durability of RMC.

Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data, Comment: Accepted for publication in ApJ Letters

We present the first asteroseismic results for $\delta$ Scuti and $\gamma$ Doradus stars observed in Sectors 1 and 2 of the TESS mission. We utilise the 2-min cadence TESS data for a sample of 117 stars to classify their behaviour regarding variability and place them in the Hertzsprung-Russell diagram using Gaia DR2 data. Included within our sample are the eponymous members of two pulsator classes, $\gamma$ Doradus and SX Phoenicis. Our sample of pulsating intermediate-mass stars observed by TESS also allows us to confront theoretical models of pulsation driving in the classical instability strip for the first time and show that mixing processes in the outer envelope play an important role. We derive an empirical estimate of 74% for the relative amplitude suppression factor as a result of the redder TESS passband compared to the Kepler mission using a pulsating eclipsing binary system. Furthermore, our sample contains many high-frequency pulsators, allowing us to probe the frequency variability of hot young $\delta$ Scuti stars, which were lacking in the Kepler mission data set, and identify promising targets for future asteroseismic modelling. The TESS data also allow us to refine the stellar parameters of SX Phoenicis, which is believed to be a blue straggler., Comment: 33 pages (incl. appendix), accepted for publications in MNRAS

The Transiting Exoplanet Survey Satellite (TESS) is performing a near all-sky survey for planets that transit bright stars. In addition, its excellent photometric precision enables asteroseismology of solar-type and red-giant stars, which exhibit convection-driven, solar-like oscillations. Simulations predict that TESS will detect solar-like oscillations in nearly 100 stars already known to host planets. In this paper, we present an asteroseismic analysis of the known red-giant host stars HD 212771 and HD 203949, both systems having a long-period planet detected through radial velocities. These are the first detections of oscillations in previously known exoplanet-host stars by TESS, further showcasing the mission's potential to conduct asteroseismology of red-giant stars. We estimate the fundamental properties of both stars through a grid-based modeling approach that uses global asteroseismic parameters as input. We discuss the evolutionary state of HD 203949 in depth and note the large discrepancy between its asteroseismic mass ($M_\ast = 1.23 \pm 0.15\,{\rm M}_\odot$ if on the red-giant branch or $M_\ast = 1.00 \pm 0.16\,{\rm M}_\odot$ if in the clump) and the mass quoted in the discovery paper ($M_\ast = 2.1 \pm 0.1\,{\rm M}_\odot$), implying a change $>30\,\%$ in the planet's mass. Assuming HD 203949 to be in the clump, we investigate the planet's past orbital evolution and discuss how it could have avoided engulfment at the tip of the red-giant branch. Finally, HD 212771 was observed by K2 during its Campaign 3, thus allowing for a preliminary comparison of the asteroseismic performances of TESS and K2. We estimate the ratio of the observed oscillation amplitudes for this star to be $A_{\rm max}^{\rm TESS}/A_{\rm max}^{\rm K2} = 0.75 \pm 0.14$, consistent with the expected ratio of $\sim0.85$ due to the redder bandpass of TESS., Comment: Accepted for publication in ApJ; 17 pages, 4 figures, 3 tables

The period 2035-50 considered in the ESA Voyage long-term plan will coincide with a series of foreseeable advances in the characterization of the stellar content of the Milky Way. The Gaia mission, combined with large-scale spectroscopic surveys, is helping to build an unprecedented census in terms of the astrometric, kinematic and chemical properties of Galactic stellar populations. Within a decade, precise measurements of such properties will be available for hundreds of millions of stars. Meanwhile, time-domain surveys initiated with CoRoT and Kepler/K2 and carried on by space missions such as TESS and PLATO or ground-based projects like the LSST, will have brought asteroseismology to a high level of maturity. The combination of precise ages from asteroseismology with astrometric and spectroscopic data, on large stellar samples, is allowing Galactic archaeologists to gain new insight into the assembly history of the Milky Way. Recent breakthroughs --- based on the detection of solar-like oscillations in tens of thousands of red-giant stars --- demonstrate the potential of such approach. Therefore, we are convinced that an all-sky, high-cadence, long-duration stellar variability survey will become a scientific priority in the 2035-50 period. The Chronos concept presented here consists in a time-domain extension to Gaia. It will allow for mass and age estimates for half a million red giants within 1.7 kpc from the Sun and hence shed a new light on our understanding of the Galactic dynamics and archaeology. In terms of the targeted pulsators, Chronos will bridge the gap between PLATO and the LSST by surveying stars all the way from the subgiant branch to the early AGB. Finally, it will surpass all previous surveys capable of conducting asteroseismology in terms of the combined sky coverage and duration of the observations (2 x 3.75 months over the whole sky and >5 years in the CVZ)., Comment: White paper submitted in response to the Voyage 2050 long-term plan in the ESA Science Programme

We present the first results from the Transiting Exoplanet Survey Satellite (TESS) on the rotational and pulsational variability of magnetic chemically peculiar A-type stars. We analyse TESS 2-min cadence data from sectors 1 and 2 on a sample of 83 stars. Five new rapidly oscillating Ap (roAp) stars are announced. One of these pulsates with periods around 4.7 min, making it the shortest period roAp star known to date. Four out of the five new roAp stars are multiperiodic. Three of these, and the singly-periodic one show the presence of rotational mode splitting. Individual frequencies are provided in all cases. In addition, seven previously known roAp stars are analysed. Additional modes of oscillation are found in some stars, while in others we are able to distinguish the true pulsations from possible aliases present in the ground-based data. We find that the pulsation amplitude in the TESS filter is typically a factor 6 smaller than that in the $B$ filter which is usually used for ground-based observations. For four roAp stars we set constraints on the inclination angle and magnetic obliquity, through the application of the oblique pulsator model. We also confirm the absence of roAp-type pulsations down to amplitude limits of 6 and 13 micromag, respectively, in two of the best characterised non-oscillating Ap (noAp) stars. We announce 27 new rotational variables along with their rotation periods, and provide different rotation periods for seven other stars. Finally, we discuss how these results challenge state-of-the-art pulsation models for roAp stars., Comment: 29 pages, accepted for publication in the MNRAS

Forward asteroseismic modelling plays an important role towards a complete understanding of the physics taking place in deep stellar interiors. With a dynamical mass in the range over which models develop convective cores while in the main sequence, the solar-like oscillator $\alpha$ Centauri A presents itself as an interesting case study. We address the impact of varying the metallicity mixture on the determination of the energy transport process at work in the core of $\alpha$ Centauri A. We find that $\gtrsim$ 70$\%$ of models reproducing the revised dynamical mass of $\alpha$ Centauri A have convective cores, regardless of the metallicity mixture adopted. This is consistent with the findings of Nsamba et al., where nuclear reaction rates were varied instead. Given these results, we propose that $\alpha$ Centauri A be adopted in the calibration of stellar model parameters when modelling solar-like stars with convective cores., Comment: 12 pages, 3 figures, 4 tables, Accepted for publication in Front. Astron. Space Sci. - Stellar and Solar Physics

We present the discovery of TOI-197.01, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. TOI-197 (HIP116158) is a bright (V=8.2 mag), spectroscopically classified subgiant which oscillates with an average frequency of about 430 muHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2-minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (2.943+/-0.064 Rsun), mass (1.212 +/- 0.074 Msun) and age (4.9+/-1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (9.17+/-0.33 Rearth) with an orbital period of ~14.3 days, irradiance of 343+/-24 Fearth, moderate mass (60.5 +/- 5.7 Mearth) and density (0.431+/-0.062 gcc). The properties of TOI-197.01 show that the host-star metallicity - planet mass correlation found in sub-Saturns (4-8 Rearth) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ~15%, TOI-197.01 is one of the best characterized Saturn-sized planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology., Comment: 12 pages (excluding author list and references), 9 figures, 4 tables, accepted for publication in AJ. An electronic version of Table 3 is available as an ancillary file (sidebar on the right)

Using asteroseismic data from the Kepler satellite, we explore the systematic uncertainties arising from changes in the input physics used when constructing evolution models of solar-type stars. We assess the impact of including atomic diffusion and of varying the metallicity mixture on the determination of global stellar parameters (i.e., radius, mass, and age). We find significant systematic uncertainties on global stellar parameters when diffusion is included in stellar grids. Furthermore, we find the systematic uncertainties on the global stellar parameters to be comparable to the statistical uncertainties when a different metallicity mixture is employed in stellar grids., Comment: 3 pages, 3 figures, proceeding of PHOST (Physics of Oscillating Stars) - a conference in honour of Prof. H. Shibahashi, 2-7 Sept. 2018, Banyuls-sur-mer (France)

This paper mainly describes the development of a new type of regression model to predict the long-term expansion of concrete subjected to a sulfate-rich environment. The experimental data originated from a long-term (40+ years), nonaccelerated test program performed by the U.S. Bureau of Reclamation (USBR). Expansion data of specimens composed of 54 different mixtures were measured periodically throughout the entire test program. In this analysis, the mixtures were first classified into three groups using K-means clustering based on their expansion patterns. Within each group, the expansion rate was predicted as an exclusive regression function of the water-cement ratio (W/C), tricalcium aluminate (C_3 A) content of cement, cement content of cement or time of expansion. Then, a support vector machine (SVM) was employed to determine the classification criteria by relying on the characteristics of the mixture proportions rather than the experimental performance, thereby enabling the model to offer predictions for new mixtures without test data. An analysis of the model indicated that concrete specimens with different mixture proportions, especially with different W/C values or C_3 A contents, are unlikely to share identical expansion patterns and should be considered and predicted separately.separately., Comment: 18 pages

The VVV survey has allowed for an unprecedented number of multi-epoch observations of the southern Galactic plane. In a recent paper,13 massive young stellar objects(MYSOs) have already been identified within the highly variable(\Delta Ks > 1 mag) YSO sample of another published work.This study aims to understand the general nature of variability in MYSOs.We present the first systematic study of variability in a large sample of candidate MYSOs.We examined the data for variability of the putative driving sources of all known Spitzer EGOs and bright 24 \mu m sources coinciding with the peak of 870 \mu m detected ATLASGAL clumps, a total of 718 targets. Of these, 190 point sources (139 EGOs and 51 non-EGOs) displayed variability (IQR > 0.05, \Delta Ks > 0.15 mag). Light-curves(LCs) have been sub-classified into eruptive, dipper, fader, short-term-variable and long-period variable-YSO categories.Lomb-Scargle periodogram analysis of periodic LCs was carried out. 1 - 870 \mu m spectral energy distributions of the variable sources were fitted with YSO models to obtain representative properties. 41% of the variable sources are represented by > 4Msun objects, and only 6% by > 8Msun objects.The highest-mass objects are mostly non-EGOs,deeply embedded.By placing them on the HR diagram we show that most lower mass,EGO type objects are concentrated on the putative birth-line position, while the luminous non-EGO type objects group around the ZAMS track.Some of the most luminous far infrared sources in the massive clumps and infrared quiet driving sources of EGOs have been missed out by this study owing to an uniform sample selection method.A high rate of detectable variability in EGO targets (139 out of 153 searched) implies that near-infrared variability in MYSOs is closely linked to the accretion phenomenon and outflow activity., Comment: 60 pages, 47 figures. Accepted for publication in Astronomy and Astrophysics

Understanding the physical process responsible for the transport of energy in the core of $\alpha$ Centauri A is of the utmost importance if this star is to be used in the calibration of stellar model physics. Adoption of different parallax measurements available in the literature results in differences in the interferometric radius constraints used in stellar modelling. Further, this is at the origin of the different dynamical mass measurements reported for this star. With the goal of reproducing the revised dynamical mass derived by Pourbaix & Boffin, we modelled the star using two stellar grids varying in the adopted nuclear reaction rates. Asteroseismic and spectroscopic observables were complemented with different interferometric radius constraints during the optimisation procedure. Our findings show that best-fit models reproducing the revised dynamical mass favour the existence of a convective core ($\gtrsim$ 70% of best-fit models), a result that is robust against changes to the model physics. If this mass is accurate, then $\alpha$ Centauri A may be used to calibrate stellar model parameters in the presence of a convective core., Comment: 6 pages, 2 figures, 4 tables. Accepted for publication in Monthly Notices of the Royal Astronomical Society Letters

Asteroseismic forward modelling techniques are being used to determine fundamental properties (e.g. mass, radius, and age) of solar-type stars. The need to take into account all possible sources of error is of paramount importance towards a robust determination of stellar properties. We present a study of 34 solar-type stars for which high signal-to-noise asteroseismic data is available from multi-year Kepler photometry. We explore the internal systematics on the stellar properties, that is, associated with the uncertainty in the input physics used to construct the stellar models. In particular, we explore the systematics arising from: (i) the inclusion of the diffusion of helium and heavy elements; and (ii) the uncertainty in solar metallicity mixture. We also assess the systematics arising from (iii) different surface correction methods used in optimisation/fitting procedures. The systematics arising from comparing results of models with and without diffusion are found to be 0.5%, 0.8%, 2.1%, and 16% in mean density, radius, mass, and age, respectively. The internal systematics in age are significantly larger than the statistical uncertainties. We find the internal systematics resulting from the uncertainty in solar metallicity mixture to be 0.7% in mean density, 0.5% in radius, 1.4% in mass, and 6.7% in age. The surface correction method by Sonoi et al. and Ball & Gizon's two-term correction produce the lowest internal systematics among the different correction methods, namely, ~1%, ~1%, ~2%, and ~8% in mean density, radius, mass, and age, respectively. Stellar masses obtained using the surface correction methods by Kjeldsen et al. and Ball & Gizon's one-term correction are systematically higher than those obtained using frequency ratios., Comment: 13 pages, 10 figures, 4 tables. Accepted for publication in Monthly Notices of the Royal Astronomical Society Journal

This book presents the proceedings of the IVth Azores International Advanced School in Space Sciences entitled "Asteroseismology and Exoplanets: Listening to the Stars and Searching for New Worlds", which took place in Horta, Azores Islands, Portugal in July 2016. The school addressed the topics at the forefront of scientific research being conducted in the fields of asteroseismology and exoplanetary science, two fields of modern astrophysics that share many synergies and resources. The book compiles the contributions from 18 invited lecturers, including a number of hands-on tutorials., Comment: HTML file with clickable links to individual chapters

The work reported here demonstrates that it is possible to accurately determine surface gravities of $\delta$ Sct stars using the frequency content from high precision photometry and a measurement of the parallax. Using a sample of 10 eclipsing binary systems with a $\delta$ Sct component and the unique $\delta$ Sct star discovered with a transiting planet, WASP-33, we were able to refine the $\Delta\nu-\bar\rho$ relation. Using this relation and parallaxes, we obtained independent values for the masses and radii, allowing us to calculate the surface gravities without any constraints from spectroscopic or binary analysis. A remarkably good agreement was found between our results and those published, extracted from the analysis of the radial velocities and light curves of the systems. This reinforces the potential of $\Delta\nu$ as a valuable observable for $\delta$ Sct stars and settles the degeneracy problem for the $\log g$ determination through spectroscopy., Comment: 5 pages, 2 figures, 1 table

The increased amount of high precision seismic data for solar-like stars calls for the existence of tools that can extract information from such data. In the case of the study of acoustic glitches there are no publicly available tools and most existing ones require a deep knowledge of their implementation. In this work a tool is presented that aims to both simplify the interaction with the user and also be capable of working automatically to determine properties of acoustic glitches from seismic data of solar-like stars. This tool is shown to work with both the Sun and other solar analogs but also shows that are still severe limitations to the methods used, when considering smaller datasets., Comment: 4 pages; 5 figures; Submitted to the Proceedings of the joint TASC2/KASC9 workshop - SPACEINN & HELAS8 conference 2016