Search

At the European Space Operations Centre in Darmstadt (Germany) the activities for ground segment development and mission operations preparation for Rosetta started in 1997. Many of the characteristics of this mission were new to ESOC and have therefore required an early effort in identifying all the necessary facilities and functions. The ground segment required entirely new elements to be developed, such as the large deep-space antenna built in New Norcia (Western Australia). The long duration of the journey to the comet, of about 10 years, required an effort in the operations concept definition to reduce the cost of routine monitoring and control. The new approaches adopted for the Rosetta mission include full transfer of on-board software maintenance responsibility to the operations team, and the installation of a fully functioning spacecraft engineering model at ESOC, in support of testing and troubleshooting activities in flight, but also for training of the operations staff. Special measures have also been taken to minimise the ground contact with the spacecraft during cruise, to reduce cost, down to a typical frequency of one contact per week. The problem of maintaining knowledge and expertise in the long flight to comet Churyumov–Gerasimenko is also a major challenge for the Rosetta operations team, which has been tackled early in the mission preparation phase and evolved with the first years of flight experience. [ABSTRACT FROM AUTHOR]

Background: Despite the widespread use of diffusion-weighted imaging (DWI) in metabolic dysfunction-associated fatty liver disease (MAFLD), MRI acquisition and quantification techniques vary in the literature suggesting the need for established and reproducible protocols. The goal of this study was to assess inter-visit and inter-reader reproducibility of DWI- and IVIM-derived parameters in patients with MAFLD and healthy volunteers using extensive sampling of the "fast" compartment, non-rigid registration, and exclusion voxels with poor fit quality., Methods: From June 2019 to April 2023, 31 subjects (20 patients with biopsy-proven MAFLD and 11 healthy volunteers) were included in this IRB-approved study. Subjects underwent MRI examinations twice within 40 days. 3.0 T DWI was acquired using a respiratory-triggered spin-echo diffusion-weighted echo-planar imaging sequence (b-values of 0, 10, 20, 30, 40, 50, 100, 200, 400, 800 s/mm 2 ). DWI series were co-registered prior to voxel-wise non-linear regression of the IVIM model and voxels with poor fit quality were excluded (normalized root mean squared error ≥ 0.05). IVIM parameters (perfusion fraction, f; diffusion coefficient, D; and pseudo-diffusion coefficient, D*), and apparent diffusion coefficients (ADC) were computed from manual segmentation of the right liver lobe performed by two analysts on two MRI examinations., Results: All results are reported for f, D, D*, and ADC respectively. For inter-reader agreement on the first visit, ICC were of 0.985, 0.994, 0.986, and 0.993 respectively. For intra-reader agreement of analyst 1 assessed on both imaging examinations, ICC between visits were of 0.805, 0.759, 0.511, and 0.850 respectively. For inter-reader agreement on the first visit, mean bias and 95 % limits of agreement were (0.00 ± 0.03), (-0.01 ± 0.03) × 10 -3  mm 2 /s, (0.70 ± 10.40) × 10 -3  mm 2 /s, and (-0.02 ± 0.04) × 10 -3  mm 2 /s respectively. For intra-reader agreement of analyst 1, mean bias and 95 % limits of agreement were (0.01 ± 0.09) × 10 -3  mm 2 /s, (-0.01 ± 0.21) × 10 -3  mm 2 /s, (-13.37 ± 56.19) × 10 -3  mm 2 /s, and (-0.01 ± 0.16) × 10 -3  mm 2 /s respectively. Except for parameter D* that was associated with between-subjects parameter variability (P = 0.009), there was no significant variability between subjects, examinations, or readers., Conclusion: With our approach, IVIM parameters f, D, D*, and ADC provided excellent inter-reader agreement and good to very good inter-visit or intra-reader agreement, thus showing the reproducibility of IVIM-DWI of the liver in MAFLD patients and volunteers., Competing Interests: Declaration of competing interest There is no conflict of interest., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Objective: To assess the reproducibility of six ultrasound (US)-determined shear wave (SW) viscoelastography parameters for assessment of mechanical properties of the liver in volunteers and patients with biopsy-proven metabolic dysfunction-associated steatotic liver disease (MASLD) or metabolic dysfunction-associated steatohepatitis (MASH)., Methods: This prospective, cross-sectional, institutional review board-approved study included 10 volunteers and 20 patients with MASLD or MASH who underwent liver US elastography twice, at least 2 weeks apart. SW speed (SWS), Young's modulus (E), shear modulus (G), SW attenuation (SWA), SW dispersion (SWD), and viscosity were computed from radiofrequency data recorded on a research US scanner. Linear mixed models were used to consider the sonographer on duty as a confounder. The reproducibility of measurements was assessed by intraclass correlation coefficient (ICC), coefficient of variation (CV), reproducibility coefficient (RDC), and Bland-Altman analyses., Results: The sonographer performing the exam had no impact on viscoelastic parameters (P > .05). ICCs of SWS, E, G, SWA, SWD, and viscosity were, respectively, 0.89 (95% confidence intervals [CI]: 0.79-0.95), 0.81 (95% CI: 0.79-0.95), 0.90 (95% CI: 0.80-0.95), 0.96 (95% CI: 0.93-0.98), 0.78 (95% CI: 0.60-0.89), and 0.90 (95% CI: 0.80-0.95); CVs were 11.9, 23.3, 24.2, 10.1, 29.0, and 32.2%; RDCs were 33.0, 64.5, 66.9, 27.7, 80.3, and 89.2%, and Bland-Altman mean biases and 95% limits of agreement were -0.05 (-0.45, 0.35) m/s, -0.61 (-5.33, 4.10) kPa, -0.25 (-2.06, 1.56) kPa, -0.01 (-0.27, 0.26) Np/m/Hz, -0.09 (-7.09, 6.91) m/s/kHz, and -0.33 (-2.60, 1.94) Pa/s, between the two visits., Conclusion: US-determined viscoelastography parameters can be measured with high reproducibility and consistency between two visits 2 weeks apart on the same ultrasound machine., (© 2024 The Author(s). Journal of Ultrasound in Medicine published by Wiley Periodicals LLC on behalf of American Institute of Ultrasound in Medicine.)

Background: Intrinsic activation MR elastography (iMRE) uses cardiovascular pulsations to assess tissue viscoelastic properties. Applying it to focal liver lesions extends its capabilities., Purpose: To assess the viscoelastic parameters of focal liver lesions measured by iMRE and compare its diagnostic performance with extrinsic MRE (eMRE) for differentiating malignant and benign lesions., Study Type: Prospective., Population: A total of 55 participants underwent MRI with research MRE sequences; 32 participants with 17 malignant and 15 benign lesions underwent both iMRE and eMRE. FIELD STRENGTH/SEQUENCE: iMRE at ~1 Hz heart rate used a 3 T scanner with a modified four-dimensional (4D)-quantitative flow gradient-echo phase contrast and low-velocity encoding cardiac-triggered technique. eMRE employed a gradient-echo sequence at 30, 40, and 60 Hz., Assessment: Liver displacements were measured using 4D-phase contrast and reconstructed via a nonlinear inversion algorithm to determine shear stiffness (SS) and damping ratio (DR). iMRE parameters were normalized to the corresponding values from the spleen. Lesions were manually segmented, and image quality was reviewed., Statistical Tests: Kruskal-Wallis, Mann-Whitney, Dunn's test, and areas under receiver operating characteristic curves (AUC) were assessed., Results: SS was significantly higher in malignant than benign lesions with iMRE at 1 Hz (3.69 ± 1.31 vs. 1.63 ± 0.45) and eMRE at 30 Hz (3.76 ± 1.12 vs. 2.60 ± 1.26 kPa), 40 Hz (3.76 ± 1.12 vs. 2.60 ± 1.26 kPa), and 60 Hz (7.32 ± 2.87 vs. 2.48 ± 1.12 kPa). DR was also significantly higher in malignant than benign lesions at 40 Hz (0.36 ± 0.11 vs. 0.21 ± 0.01) and 60 Hz (0.89 ± 0.86 vs. 0.22 ± 0.09). The AUC were 0.86 for iMRE SS, 0.87-0.98 for eMRE SS, 0.47 for iMRE DR, and 0.62-0.86 for eMRE DR., Data Conclusion: Cardiac-activated iMRE can characterize liver lesions and differentiate malignant from benign lesions through normalized SS maps., Level of Evidence: 2 TECHNICAL EFFICACY: Stage 2., (© 2024 The Author(s). Journal of Magnetic Resonance Imaging published by Wiley Periodicals LLC on behalf of International Society for Magnetic Resonance in Medicine.)

Colorectal liver metastases (CLM) affect almost half of all colon cancer patients and the response to systemic chemotherapy plays a crucial role in patient survival. While oncologists typically use tumor grading scores, such as tumor regression grade (TRG), to establish an accurate prognosis on patient outcomes, including overall survival (OS) and time-to-recurrence (TTR), these traditional methods have several limitations. They are subjective, time-consuming, and require extensive expertise, which limits their scalability and reliability. Additionally, existing approaches for prognosis prediction using machine learning mostly rely on radiological imaging data, but recently histological images have been shown to be relevant for survival predictions by allowing to fully capture the complex microenvironmental and cellular characteristics of the tumor. To address these limitations, we propose an end-to-end approach for automated prognosis prediction using histology slides stained with Hematoxylin and Eosin (H&E) and Hematoxylin Phloxine Saffron (HPS). We first employ a Generative Adversarial Network (GAN) for slide normalization to reduce staining variations and improve the overall quality of the images that are used as input to our prediction pipeline. We propose a semi-supervised model to perform tissue classification from sparse annotations, producing segmentation and feature maps. Specifically, we use an attention-based approach that weighs the importance of different slide regions in producing the final classification results. Finally, we exploit the extracted features for the metastatic nodules and surrounding tissue to train a prognosis model. In parallel, we train a vision Transformer model in a knowledge distillation framework to replicate and enhance the performance of the prognosis prediction. We evaluate our approach on an in-house clinical dataset of 258 CLM patients, achieving superior performance compared to other comparative models with a c-index of 0.804 (0.014) for OS and 0.735 (0.016) for TTR, as well as on two public datasets. The proposed approach achieves an accuracy of 86.9% to 90.3% in predicting TRG dichotomization. For the 3-class TRG classification task, the proposed approach yields an accuracy of 78.5% to 82.1%, outperforming the comparative methods. Our proposed pipeline can provide automated prognosis for pathologists and oncologists, and can greatly promote precision medicine progress in managing CLM patients., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Objective: The purpose of this study was to determine and compare the performance of pre-treatment clinical risk score (CRS), radiomics models based on computed (CT), and their combination for predicting time to recurrence (TTR) and disease-specific survival (DSS) in patients with colorectal cancer liver metastases., Methods: We retrospectively analyzed a prospectively maintained registry of 241 patients treated with systemic chemotherapy and surgery for colorectal cancer liver metastases. Radiomics features were extracted from baseline, pre-treatment, contrast-enhanced CT images. Multiple aggregation strategies were investigated for cases with multiple metastases. Radiomics signatures were derived using feature selection methods. Random survival forests (RSF) and neural network survival models (DeepSurv) based on radiomics features, alone or combined with CRS, were developed to predict TTR and DSS. Leveraging survival models predictions, classification models were trained to predict TTR within 18 months and DSS within 3 years. Classification performance was assessed with area under the receiver operating characteristic curve (AUC) on the test set., Results: For TTR prediction, the concordance index (95% confidence interval) was 0.57 (0.57-0.57) for CRS, 0.61 (0.60-0.61) for RSF in combination with CRS, and 0.70 (0.68-0.73) for DeepSurv in combination with CRS. For DSS prediction, the concordance index was 0.59 (0.59-0.59) for CRS, 0.57 (0.56-0.57) for RSF in combination with CRS, and 0.60 (0.58-0.61) for DeepSurv in combination with CRS. For TTR classification, the AUC was 0.33 (0.33-0.33) for CRS, 0.77 (0.75-0.78) for radiomics signature alone, and 0.58 (0.57-0.59) for DeepSurv score alone. For DSS classification, the AUC was 0.61 (0.61-0.61) for CRS, 0.57 (0.56-0.57) for radiomics signature, and 0.75 (0.74-0.76) for DeepSurv score alone., Conclusion: Radiomics-based survival models outperformed CRS for TTR prediction. More accurate, noninvasive, and early prediction of patient outcome may help reduce exposure to ineffective yet toxic chemotherapy or high-risk major hepatectomies., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Montagnon et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

We aimed to implement four data partitioning strategies evaluated with four federated learning (FL) algorithms and investigate the impact of data distribution on FL model performance in detecting steatosis using B-mode US images. A private dataset (153 patients; 1530 images) and a public dataset (55 patient; 550 images) were included in this retrospective study. The datasets contained patients with metabolic dysfunction-associated fatty liver disease (MAFLD) with biopsy-proven steatosis grades and control individuals without steatosis. We employed four data partitioning strategies to simulate FL scenarios and we assessed four FL algorithms. We investigated the impact of class imbalance and the mismatch between the global and local data distributions on the learning outcome. Classification performance was assessed with area under the receiver operating characteristic curve (AUC) on a separate test set. AUCs were 0.93 (95% CI 0.92, 0.94) for source-based partitioning scenario with FedAvg, 0.90 (95% CI 0.89, 0.91) for a centralized model, and 0.83 (95% CI 0.81, 0.85) for a model trained in a single-center scenario. When data was perfectly balanced on the global level and each site had an identical data distribution, the model yielded an AUC of 0.90 (95% CI 0.88, 0.92). When each site contained data exclusively from one single class, irrespective of the global data distribution, the AUC fell in the range of 0.34-0.70. FL applied to B-mode US images provide performance comparable to a centralized model and higher than single-center scenario. Global data imbalance and local data heterogeneity influenced the learning outcome., (© 2024. The Author(s).)

Background: Abdominal aortic aneurysm (AAA) rupture prediction based on sex and diameter could be improved. The goal was to assess whether aortic calcification distribution could better predict AAA rupture through machine learning and LASSO regression., Methodology: In this retrospective study, 80 patients treated for a ruptured AAA between January 2001 and August 2018 were matched with 80 non-ruptured patients based on maximal AAA diameter, age, and sex. Calcification volume and dispersion, morphologic, and clinical variables were compared between both groups using a univariable analysis with p = 0.05 and multivariable analysis through machine learning and LASSO regression. We used AUC for machine learning and odds ratios for regression to measure performance., Results: Mean age of patients was 74.0 ± 8.4 years and 89% were men. AAA diameters were equivalent in both groups (80.9 ± 17.5 vs 79.0 ± 17.3 mm, p = 0.505). Ruptured aneurysms contained a smaller number of calcification aggregates (18.0 ± 17.9 vs 25.6 ± 18.9, p = 0.010) and were less likely to have a proximal neck (45.0% vs 76.3%, p < 0.001). In the machine learning analysis, 5 variables were associated to AAA rupture: proximal neck, antiplatelet use, calcification number, Euclidian distance between calcifications, and standard deviation of the Euclidian distance. A follow-up LASSO regression was concomitant with the findings of the machine learning analysis regarding calcification dispersion but discordant on calcification number., Conclusion: There might be more to AAA calcifications that what is known in the present literature. We need larger prospective studies to investigate if indeed, calcification dispersion affects rupture risk., Clinical Relevance Statement: Ruptured aneurysms are possibly more likely to have their calcification volume concentrated in a smaller geographical area., Key Points: • Abdominal aortic aneurysm (AAA) rupture prediction based on sex and diameter could be improved. • For a given calcification volume, AAAs with well-distributed calcification clusters could be less likely to rupture. • A machine learning model including AAA calcifications better predicts rupture compared to a model based solely on maximal diameter and sex alone, although it might be prone to overfitting., (© 2023. The Author(s), under exclusive licence to European Society of Radiology.)

Background Screening for nonalcoholic fatty liver disease (NAFLD) is suboptimal due to the subjective interpretation of US images. Purpose To evaluate the agreement and diagnostic performance of radiologists and a deep learning model in grading hepatic steatosis in NAFLD at US, with biopsy as the reference standard. Materials and Methods This retrospective study included patients with NAFLD and control patients without hepatic steatosis who underwent abdominal US and contemporaneous liver biopsy from September 2010 to October 2019. Six readers visually graded steatosis on US images twice, 2 weeks apart. Reader agreement was assessed with use of κ statistics. Three deep learning techniques applied to B-mode US images were used to classify dichotomized steatosis grades. Classification performance of human radiologists and the deep learning model for dichotomized steatosis grades (S0, S1, S2, and S3) was assessed with area under the receiver operating characteristic curve (AUC) on a separate test set. Results The study included 199 patients (mean age, 53 years ± 13 [SD]; 101 men). On the test set ( n = 52), radiologists had fair interreader agreement (0.34 [95% CI: 0.31, 0.37]) for classifying steatosis grades S0 versus S1 or higher, while AUCs were between 0.49 and 0.84 for radiologists and 0.85 (95% CI: 0.83, 0.87) for the deep learning model. For S0 or S1 versus S2 or S3, radiologists had fair interreader agreement (0.30 [95% CI: 0.27, 0.33]), while AUCs were between 0.57 and 0.76 for radiologists and 0.73 (95% CI: 0.71, 0.75) for the deep learning model. For S2 or lower versus S3, radiologists had fair interreader agreement (0.37 [95% CI: 0.33, 0.40]), while AUCs were between 0.52 and 0.81 for radiologists and 0.67 (95% CI: 0.64, 0.69) for the deep learning model. Conclusion Deep learning approaches applied to B-mode US images provided comparable performance with human readers for detection and grading of hepatic steatosis. Published under a CC BY 4.0 license. Supplemental material is available for this article. See also the editorial by Tuthill in this issue.

Background: Finding a noninvasive radiomic surrogate of tumor immune features could help identify patients more likely to respond to novel immune checkpoint inhibitors. Particularly, CD73 is an ectonucleotidase that catalyzes the breakdown of extracellular AMP into immunosuppressive adenosine, which can be blocked by therapeutic antibodies. High CD73 expression in colorectal cancer liver metastasis (CRLM) resected with curative intent is associated with early recurrence and shorter patient survival. The aim of this study was hence to evaluate whether machine learning analysis of preoperative liver CT-scan could estimate high vs low CD73 expression in CRLM and whether such radiomic score would have a prognostic significance., Methods: We trained an Attentive Interpretable Tabular Learning (TabNet) model to predict, from preoperative CT images, stratified expression levels of CD73 (CD73 High vs. CD73 Low ) assessed by immunofluorescence (IF) on tissue microarrays. Radiomic features were extracted from 160 segmented CRLM of 122 patients with matched IF data, preprocessed and used to train the predictive model. We applied a five-fold cross-validation and validated the performance on a hold-out test set., Results: TabNet provided areas under the receiver operating characteristic curve of 0.95 (95% CI 0.87 to 1.0) and 0.79 (0.65 to 0.92) on the training and hold-out test sets respectively, and outperformed other machine learning models. The TabNet-derived score, termed rad-CD73, was positively correlated with CD73 histological expression in matched CRLM (Spearman's ρ = 0.6004; P < 0.0001). The median time to recurrence (TTR) and disease-specific survival (DSS) after CRLM resection in rad-CD73 High vs rad-CD73 Low patients was 13.0 vs 23.6 months (P = 0.0098) and 53.4 vs 126.0 months (P = 0.0222), respectively. The prognostic value of rad-CD73 was independent of the standard clinical risk score, for both TTR (HR = 2.11, 95% CI 1.30 to 3.45, P < 0.005) and DSS (HR = 1.88, 95% CI 1.11 to 3.18, P = 0.020)., Conclusions: Our findings reveal promising results for non-invasive CT-scan-based prediction of CD73 expression in CRLM and warrant further validation as to whether rad-CD73 could assist oncologists as a biomarker of prognosis and response to immunotherapies targeting the adenosine pathway., (© 2023. The Author(s).)

Background: Multiple clinical phenotypes have been proposed for coronavirus disease (COVID-19), but few have used multimodal data. Using clinical and imaging data, we aimed to identify distinct clinical phenotypes in patients admitted with COVID-19 and to assess their clinical outcomes. Our secondary objective was to demonstrate the clinical applicability of this method by developing an interpretable model for phenotype assignment., Methods: We analyzed data from 547 patients hospitalized with COVID-19 at a Canadian academic hospital. We processed the data by applying a factor analysis of mixed data (FAMD) and compared four clustering algorithms: k-means, partitioning around medoids (PAM), and divisive and agglomerative hierarchical clustering. We used imaging data and 34 clinical variables collected within the first 24 h of admission to train our algorithm. We conducted a survival analysis to compare the clinical outcomes across phenotypes. With the data split into training and validation sets (75/25 ratio), we developed a decision-tree-based model to facilitate the interpretation and assignment of the observed phenotypes., Results: Agglomerative hierarchical clustering was the most robust algorithm. We identified three clinical phenotypes: 79 patients (14%) in Cluster 1, 275 patients (50%) in Cluster 2, and 203 (37%) in Cluster 3. Cluster 2 and Cluster 3 were both characterized by a low-risk respiratory and inflammatory profile but differed in terms of demographics. Compared with Cluster 3, Cluster 2 comprised older patients with more comorbidities. Cluster 1 represented the group with the most severe clinical presentation, as inferred by the highest rate of hypoxemia and the highest radiological burden. Intensive care unit (ICU) admission and mechanical ventilation risks were the highest in Cluster 1. Using only two to four decision rules, the classification and regression tree (CART) phenotype assignment model achieved an AUC of 84% (81.5-86.5%, 95 CI) on the validation set., Conclusions: We conducted a multidimensional phenotypic analysis of adult inpatients with COVID-19 and identified three distinct phenotypes associated with different clinical outcomes. We also demonstrated the clinical usability of this approach, as phenotypes can be accurately assigned using a simple decision tree. Further research is still needed to properly incorporate these phenotypes in the management of patients with COVID-19., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (© 2023 Yamga, Mullie, Durand, Cadrin-Chenevert, Tang, Montagnon, Chartrand-Lefebvre and Chassé.)

Deep learning is a class of machine learning methods that has been successful in computer vision. Unlike traditional machine learning methods that require hand-engineered feature extraction from input images, deep learning methods learn the image features by which to classify data. Convolutional neural networks (CNNs), the core of deep learning methods for imaging, are multilayered artificial neural networks with weighted connections between neurons that are iteratively adjusted through repeated exposure to training data. These networks have numerous applications in radiology, particularly in image classification, object detection, semantic segmentation, and instance segmentation. The authors provide an update on a recent primer on deep learning for radiologists, and they review terminology, data requirements, and recent trends in the design of CNNs; illustrate building blocks and architectures adapted to computer vision tasks, including generative architectures; and discuss training and validation, performance metrics, visualization, and future directions. Familiarity with the key concepts described will help radiologists understand advances of deep learning in medical imaging and facilitate clinical adoption of these techniques. Online supplemental material is available for this article. © RSNA, 2021.

In developed countries, colorectal cancer is the second cause of cancer-related mortality. Chemotherapy is considered a standard treatment for colorectal liver metastases (CLM). Among patients who develop CLM, the assessment of patient response to chemotherapy is often required to determine the need for second-line chemotherapy and eligibility for surgery. However, while FOLFOX-based regimens are typically used for CLM treatment, the identification of responsive patients remains elusive. Computer-aided diagnosis systems may provide insight in the classification of liver metastases identified on diagnostic images. In this paper, we propose a fully automated framework based on deep convolutional neural networks (DCNN) which first differentiates treated and untreated lesions to identify new lesions appearing on CT scans, followed by a fully connected neural networks to predict from untreated lesions in pre-treatment computed tomography (CT) for patients with CLM undergoing chemotherapy, their response to a FOLFOX with Bevacizumab regimen as first-line of treatment. The ground truth for assessment of treatment response was histopathology-determined tumor regression grade. Our DCNN approach trained on 444 lesions from 202 patients achieved accuracies of 91% for differentiating treated and untreated lesions, and 78% for predicting the response to FOLFOX-based chemotherapy regimen. Experimental results showed that our method outperformed traditional machine learning algorithms and may allow for the early detection of non-responsive patients.

Interest for deep learning in radiology has increased tremendously in the past decade due to the high achievable performance for various computer vision tasks such as detection, segmentation, classification, monitoring, and prediction. This article provides step-by-step practical guidance for conducting a project that involves deep learning in radiology, from defining specifications, to deployment and scaling. Specifically, the objectives of this article are to provide an overview of clinical use cases of deep learning, describe the composition of multi-disciplinary team, and summarize current approaches to patient, data, model, and hardware selection. Key ideas will be illustrated by examples from a prototypical project on imaging of colorectal liver metastasis. This article illustrates the workflow for liver lesion detection, segmentation, classification, monitoring, and prediction of tumor recurrence and patient survival. Challenges are discussed, including ethical considerations, cohorting, data collection, anonymization, and availability of expert annotations. The practical guidance may be adapted to any project that requires automated medical image analysis.

Deep vein thrombosis is a common vascular disease that can lead to pulmonary embolism and death. The early diagnosis and clot age staging are important parameters for reliable therapy planning. This article presents an acoustic radiation force induced resonance elastography method for the viscoelastic characterization of clotting blood. The physical concept of this method relies on the mechanical resonance of the blood clot occurring at specific frequencies. Resonances are induced by focusing ultrasound beams inside the sample under investigation. Coupled to an analytical model of wave scattering, the ability of the proposed method to characterize the viscoelasticity of a mimicked venous thrombosis in the acute phase is demonstrated. Experiments with a gelatin-agar inclusion sample of known viscoelasticity are performed for validation and establishment of the proof of concept. In addition, an inversion method is applied in-vitro for the kinetic monitoring of the blood coagulation process of six human blood samples obtained from two volunteers. The computed elasticity and viscosity values of blood samples at the end of the 90 min kinetics were estimated at 411 ± 71 Pa and 0.25 ± 0.03 Pa.s for volunteer #1, and 387 ± 35 Pa and 0.23 ± 0.02 Pa.s for volunteer #2, respectively. The proposed method allowed reproducible time-varying thrombus viscoelastic measurements from samples having physiological dimensions., (© 2018 Institute of Physics and Engineering in Medicine.)

Hydrogels are extensively used for tissue engineering, cell therapy or controlled release of bioactive factors. Nondestructive techniques that can follow their viscoelastic properties during polymerization, remodeling, and degradation are needed, since these properties are determinant for their in vivo efficiency. In this work, we proposed the viscoelastic testing of bilayered materials (VeTBiM) as a new method for nondestructive and contact-less mechanical characterization of soft materials. The VeTBiM method measures the dynamic displacement response of a material, to a low amplitude vibration in order to characterize its viscoelastic properties. We validated VeTBiM by comparing data obtained on various agar and chitosan hydrogels with data from rotational rheometry, and compression tests. We then investigated its potential to follow the mechanical properties of chitosan hydrogels during gelation and in the presence of papain and lysozyme that induce fast or slow enzymatic degradation. Due to this nondestructive and contactless approach, samples can be removed from the instrument and stored in different conditions between measurements. VeTBiM is well adapted to follow biomaterials alone or with cells, over long periods of time. This new method will help in the fine tuning of the mechanical properties of biomaterials used for cell therapy and tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2565-2573, 2017., (© 2016 Wiley Periodicals, Inc.)

Purpose: Different approaches have been used in dynamic elastography to assess mechanical properties of biological tissues. Most techniques are based on a simple inversion based on the measurement of the shear wave speed to assess elasticity, whereas some recent strategies use more elaborated analytical or finite element method (FEM) models. In this study, a new method is proposed for the quantification of both shear storage and loss moduli of confined lesions, in the context of breast imaging, using adaptive torsional shear waves (ATSWs) generated remotely with radiation pressure., Methods: A FEM model was developed to solve the inverse wave propagation problem and obtain viscoelastic properties of interrogated media. The inverse problem was formulated and solved in the frequency domain and its robustness to noise and geometric constraints was evaluated. The proposed model was validated in vitro with two independent rheology methods on several homogeneous and heterogeneous breast tissue-mimicking phantoms over a broad range of frequencies (up to 400 Hz)., Results: Viscoelastic properties matched benchmark rheology methods with discrepancies of 8%-38% for the shear modulus G' and 9%-67% for the loss modulus G″. The robustness study indicated good estimations of storage and loss moduli (maximum mean errors of 19% on G' and 32% on G″) for signal-to-noise ratios between 19.5 and 8.5 dB. Larger errors were noticed in the case of biases in lesion dimension and position., Conclusions: The ATSW method revealed that it is possible to estimate the viscoelasticity of biological tissues with torsional shear waves when small biases in lesion geometry exist.

Locating and evaluating the length and severity of a stenosis is very important for planning adequate treatment of peripheral arterial disease (PAD). Conventional ultrasound (US) examination cannot provide maps of entire lower limb arteries in 3-D. We propose a prototype 3D-US robotic system with B-mode images, which is nonionizing, noninvasive, and is able to track and reconstruct a continuous segment of the lower limb arterial tree between the groin and the knee. From an initialized cross-sectional view of the vessel, automatic tracking was conducted followed by 3D-US reconstructions evaluated using Hausdorff distance, cross-sectional area, and stenosis severity in comparison with 3-D reconstructions with computed tomography angiography (CTA). A mean Hausdorff distance of 0.97 ± 0.46 mm was found in vitro for 3D-US compared with 3D-CTA vessel representations. To evaluate the stenosis severity in vitro, 3D-US reconstructions gave errors of 3%-6% when compared with designed dimensions of the phantom, which are comparable to 3D-CTA reconstructions, with 4%-13% errors. The in vivo system's feasibility to reconstruct a normal femoral artery segment of a volunteer was also investigated. These results encourage further ergonomic developments to increase the robot's capacity to represent lower limb vessels in the clinical context.

A method based on adaptive torsional shear waves (ATSW) is proposed to overcome the strong attenuation of shear waves generated by a radiation force in dynamic elastography. During the inward propagation of ATSW, the magnitude of displacements is enhanced due to the convergence of shear waves and constructive interferences. The proposed method consists in generating ATSW fields from the combination of quasi-plane shear wavefronts by considering a linear superposition of displacement maps. Adaptive torsional shear waves were experimentally generated in homogeneous and heterogeneous tissue mimicking phantoms, and compared to quasi-plane shear wave propagations. Results demonstrated that displacement magnitudes by ATSW could be up to 3 times higher than those obtained with quasi-plane shear waves, that the variability of shear wave speeds was reduced, and that the signal-to-noise ratio of displacements was improved. It was also observed that ATSW could cause mechanical inclusions to resonate in heterogeneous phantoms, which further increased the displacement contrast between the inclusion and the surrounding medium. This method opens a way for the development of new noninvasive tissue characterization strategies based on ATSW in the framework of our previously reported shear wave induced resonance elastography (SWIRE) method proposed for breast cancer diagnosis.

In remote dynamic elastography, the amplitude of the generated displacement field is directly related to the amplitude of the radiation force. Therefore, displacement improvement for better tissue characterization requires the optimization of the radiation force amplitude by increasing the push duration and/or the excitation amplitude applied on the transducer. The main problem of these approaches is that the Food and Drug Administration (FDA) thresholds for medical applications and transducer limitations may be easily exceeded. In the present study, the effect of the frequency used for the generation of the radiation force on the amplitude of the displacement field was investigated. We found that amplitudes of displacements generated by adapted radiation force sequences were greater than those generated by standard nonadapted ones (i.e., single push acoustic radiation force impulse and supersonic shear imaging). Gains in magnitude were between 20 to 158% for in vitro measurements on agar-gelatin phantoms, and 170 to 336% for ex vivo measurements on a human breast sample, depending on focus depths and attenuations of tested samples. The signal-to-noise ratio was also improved more than 4-fold with adapted sequences. We conclude that frequency adaptation is a complementary technique that is efficient for the optimization of displacement amplitudes. This technique can be used safely to optimize the deposited local acoustic energy without increasing the risk of damaging tissues and transducer elements.

With the purpose of assessing localized rheological behavior of pathological tissues using ultrasound dynamic elastography, an analytical shear wave scattering model was used in an inverse problem framework. The proposed method was adopted to estimate the complex shear modulus of viscoelastic spheres from 200 to 450 Hz. The inverse problem was formulated and solved in the frequency domain, allowing assessment of the complex viscoelastic shear modulus at discrete frequencies. A representative rheological model of the spherical obstacle was determined by comparing storage and loss modulus behaviors with Kelvin-Voigt, Maxwell, Zener, and Jeffrey models. The proposed inversion method was validated by using an external vibrating source and acoustic radiation force. The estimation of viscoelastic properties of three-dimensional spheres made softer or harder than surrounding tissues did not require a priori rheological assumptions. The proposed method is intended to be applied in the context of breast cancer imaging.

This paper presents a semi-analytical model of shear wave scattering by a viscoelastic elliptical structure embedded in a viscoelastic medium, and its application in the context of dynamic elastography imaging. The commonly used assumption of mechanical homogeneity in the inversion process is removed introducing a priori geometrical information to model physical interactions of plane shear waves with the confined mechanical heterogeneity. Theoretical results are first validated using the finite element method for various mechanical configurations and incidence angles. Secondly, an inverse problem is formulated to assess viscoelastic parameters of both the elliptic inclusion and its surrounding medium, and applied in vitro to characterize mechanical properties of agar-gelatin phantoms. The robustness of the proposed inversion method is then assessed under various noise conditions, biased geometrical parameters and compared to direct inversion, phase gradient and time-of-flight methods. The proposed elastometry method appears reliable in the context of estimating confined lesion viscoelastic parameters.

Shear wave induced resonance elastography (SWIRE) is proposed for deep venous thrombosis (DVT) elasticity assessment. This new imaging technique takes advantage of properly polarized shear waves to induce resonance of a confined mechanical heterogeneity. Realistic phantoms (n = 9) of DVT total and partial clot occlusions with elasticities from 406 to 3561 Pa were built for in vitro experiments. An ex vivo study was also performed to evaluate the elasticity of two fresh porcine venous thrombi in a pig model. Transient shear waves at 45-205 Hz were generated by the vibration of a rigid plate (plane wavefront) or by a needle to simulate a radiation pressure on a line segment (cylindrical wavefront). Induced propagation of shear waves was imaged with an ultrafast ultrasound scanner and a finite element method was developed to simulate tested experimental conditions. An inverse problem was then formulated considering the first resonance frequency of the DVT inclusion. Elasticity agreements between SWIRE and a reference spectroscopy instrument (RheoSpectris) were found in vitro for total clots either in plane (r(2) = 0.989) or cylindrical (r(2) = 0.986) wavefront configurations. For total and partial clots, elasticity estimation errors were 9.0 ±4.6% and 9.3 ±11.3%, respectively. Ex vivo, the blood clot elasticity was 498 ±58 Pa within the inferior vena cava and 436 ±45 Pa in the right common iliac vein (p = 0.22). To conclude, the SWIRE technique seems feasible to quantitatively assess blood clot elasticity in the context of DVT ultrasound imaging.

This communication is a survey of 53 cataract operations followed up during a period of 1-6 years, with an average of 4 years, and performed on patients who had a high risk of subsequent retinal detachment because of a preceding detachment on the fellow eye or on the cataractous eye, because of peripheral retinal degenerations, or a history of hereditary retinal detachment. Most of the operations were performed under general anesthesia and ocular hypotony. In all the cases, a limbal-based conjonctival flap with a double line of sutures (scleral and conjonctival), an iridectomy in segment, a zonulolysis and a cryoextraction, were done. As for the retina, 18 eyes received a coagulation before the cataract extraction by galvano- or cryocoagulation or even by xenon photocoagulation. Among them 3 had a detachment after the cataract extraction, but 2 of them were cured by a new operation. 15 eyes had peripheral retinal lesions which were coagulated after the cataract extraction by cryo-, laser or xenon coagulation. Nevertheless 2 had a detachment. 13 patients with a detachment on the fellow eye or in the family, had no peripheral lesion and were not coagulated. None of them had a retinal detachment after the cataract extraction. Finally the eyes operated upon a short time after the cataract extraction suffered severe complications: reopening of the cataract incision, loss of vitreous and finally loss of 2 eyes out of 3.