Search

Visible and infrared photons can be detected with a broadband response via the internal photoeffect. By using plasmonic nanostructures, i.e. nanoantennas, wavelength selectivity can be introduced to such detectors through geometry-dependent resonances. Also, additional functionality, like electronic responsivity switching and polarization detection have been realized. However, previous devices consisted of large arrays of nanostructures to achieve detectable photocurrents. Here we show that this concept can be scaled down to a single antenna level, resulting in detector dimensions well below the resonance wavelength of the device. Our design consists of a single electrically-connected plasmonic nanoantenna covered with a wide-bandgap semiconductor allowing broadband photodetection in the VIS/NIR via injection of hot carriers. We demonstrate electrical switching of the color sensitivity as well as polarization detection. Our results hold promise for the realization of ultra small, highly integratable photodetectors with advanced functionality., Comment: 8 pages, 4 figures

Topologically locked for emission The output power from a laser system can be increased by forming an array of lasers; however, because the individual lasers are independent, the resultant output may not be coherent. Dikopoltsev et al . report on the realization of a topological vertical-cavity surface-emitting laser (VCSEL) array. The topological nature of the array-based laser emission was achieved through a combination of topological in-plane propagation of evanescent light linking the vertical cavity surface-emitting lasers of the array. The topological features of the array force injection locking, making all emitters (30 in this case) act as a single coherent laser. This development will be important for realizing large-scale coherent laser arrays. —ISO

Single-molecule localization microscopy (SMLM) aims for maximized precision and a high signal-to-noise ratio1. Both features can be provided by placing the emitter in front of a metal-dielectric nanocoating that acts as a tuned mirror2–4. Here, we demonstrate that a higher photon yield at a lower background on biocompatible metal-dielectric nanocoatings substantially improves SMLM performance and increases the localization precision by up to a factor of two. The resolution improvement relies solely on easy-to-fabricate nanocoatings on standard glass coverslips and is spectrally and spatially tunable by the layer design and wavelength, as experimentally demonstrated for dual-color SMLM in cells.

The electrical excitation of guided plasmonic modes at the nanoscale enables integration of optical nanocircuitry into nanoelectronics. In this context, exciting plasmons with a distinct modal field profile constitutes a key advantage over conventional single-mode integrated photonics. Here, we demonstrate the selective electrical excitation of the lowest-order symmetric and antisymmetric plasmonic modes in a two-wire transmission line. We achieve mode selectivity by precisely positioning nanoscale excitation sources, i.e., junctions for inelastic electron tunneling, within the respective modal field distribution. By using advanced fabrication that combines focused He-ion beam milling and dielectrophoresis, we control the location of tunnel junctions with sub-10 nm accuracy. At the far end of the two-wire transmission line, the guided plasmonic modes are converted into far-field radiation at separate spatial positions showing two distinct orthogonal polarizations. Hence, the resulting device represents the smallest electrically driven light source with directly switchable polarization states with possible applications in display technology.

We present the first experimental demonstration of a topological insulator VCSEL array. Our laser consists of 30 emitters, emitting in a single frequency, displaying interference proving that the emitters act as a single laser.

The electronic bandstructure of a solid is a collection of allowed bands separated by forbidden bands, revealing the geometric symmetry of the crystal structures. Comprehensive knowledge of the bandstructure with band parameters explains intrinsic physical, chemical and mechanical properties of the solid. Here we report the artificial polaritonic bandstructures of two-dimensional honeycomb lattices for microcavity exciton-polaritons using GaAs semiconductors in the wide-range detuning values, from cavity-photon-like (red-detuned) to exciton-like (blue-detuned) regimes. In order to understand the experimental bandstructures and their band parameters, such as gap energies, bandwidths, hopping integrals and density of states, we originally establish a polariton band theory within an augmented plane wave method with two-kind-bosons, cavity photons trapped at the lattice sites and freely moving excitons. In particular, this two-kind-band theory is absolutely essential to elucidate the exciton effect in the bandstructures of blue-detuned exciton-polaritons, where the flattened exciton-like dispersion appears at larger in-plane momentum values captured in our experimental access window. We reach an excellent agreement between theory and experiments in all detuning values., Comment: 11 pages, 7 figures

We report on novel exciton-polariton routing devices created to study and purposely guide light-matter particles in their condensate phase. In a co-directional coupling device, two waveguides are connected by a partially etched section which facilitates tunable coupling of the adjacent channels. This evanescent coupling of the two macroscopic wavefunctions in each waveguide reveals itself in real space oscillations of the condensate. This Josephson-like oscillation has only been observed in coupled polariton traps so far. Here, we report on a similar coupling behavior in a controllable, propagative waveguide-based design. By controlling the gap width, channel length or the propagation energy, the exit port of the polariton flow can be chosen. This co-directional polariton device is a passive and scalable coupler element that can serve in compact, next generation logic architectures., 6 pages, 5 figures

In recent years, novel two-dimensional materials such as graphene, bismuthene and transition-metal dichalcogenides have attracted considerable interest due to their unique physical properties. A range of physical effects can be transferred to the realms of photonics by creating artificial photonic lattices emulating these two-dimensional materials. Here, exciton-polaritons in semiconductor microcavities offer an exciting opportunity to study a part-light, part-matter quantum fluid of light in a complex lattice potential. In this paper, we study exciton-polaritons in a two-dimensional Lieb lattice of buried optical traps. The $S$ and $P_{xy}$ photonic orbitals of such a Lieb lattice give rise to the formation of two flatbands which are of greatest interest for the distortion-free storage of compact localized states. By using a well controlled etch-and-overgrowth technique, we manage to control the trapping as well as the site couplings with great precision. This allows us to spectroscopically monitor the flatness of the flatbands across the full Brillouin zone. Furthermore, we demonstrate experimentally that these flatbands can be directly populated by condensation under non-resonant laser excitation. Finally, using this advanced device approach we demonstrate resonant and deterministic excitation of flatband modes in transmission geometry. Our findings establish the exciton-polariton systems as a highly controllable, optical many-body system to study flatband effects and for distortion-free storage of compact localized states., 6 pages, 4 figures

We observe experimentally collective lasing of a topological mode in a vertical-cavity surface-emitting laser (VCSEL) array. The array is comprised of pillar-shaped VCSELs in a crystalline model geometry and is optically pumped.

Topological concepts have been applied to a wide range of fields in order to successfully describe the emergence of robust edge modes that are unaffected by scattering or disorder. In photonics, indications of lasing from topologically protected modes with improved overall laser characteristics were observed. Here, we study exciton-polariton microcavity traps that are arranged in a one-dimensional Su-Schrieffer-Heeger lattice and form a topological defect mode from which we unequivocally observe highly coherent polariton lasing. Additionally, we confirm the excitonic contribution to the polariton lasing by applying an external magnetic field. These systematic experimental findings of robust lasing and high temporal coherence are meticulously reproduced by a combination of a generalized Gross-Pitaevskii model and a Lindblad master equation model. Thus, by using the comparatively simple SSH geometry, we are able to describe and control the exciton-polariton topological lasing, allowing for a deeper understanding of topological effects on microlasers., Comment: 25 pages, 6 figures

Kagome lattices supporting Dirac cone and flatband dispersions are well known as a highly frustrated, two-dimensional lattice system. Particularly the flatbands therein are attracting continuous interest based on their link to topological order, correlations and frustration. In this work, we realize coupled microcavity implementations of Kagome lattices hosting exciton-polariton quantum fluids of light. We demonstrate precise control over the dispersiveness of the flatband as well as selective condensation of exciton-polaritons into the flatband. Subsequently, we focus on the spatial and temporal coherence properties of the laser-like emission from these polariton condensates that are closely connected to the flatband nature of the system. Notably, we find a drastic increase in coherence time due to the localization of flatband condensates. Our work illustrates the outstanding suitability of the exciton-polariton system for detailed studies of flatband states as a platform for microlaser arrays in compact localized states, including strong interactions, topology and non-linearity., Comment: 19 pages, 5 figures

Interacting bosonic particles in artificial lattices have proven to be a powerful tool for the investigation of exotic phases of matter as well as phenomena resulting from non-trivial topology. Exciton-polaritons, bosonic quasi-particles of light and matter, have shown to combine the on-chip benefits of optical systems with strong interactions, inherited form their matter character. Technologically significant semiconductor platforms, however, strictly require cryogenic temperatures for operability. In this paper, we demonstrate exciton-polariton lasing for topological defects emerging form the imprinted lattice structure at room temperature. We utilize a monomeric red fluorescent protein derived from DsRed of Discosoma sea anemones, hosting highly stable Frenkel excitons. Using a patterned mirror cavity, we tune the lattice potential landscape of a linear Su-Schrieffer-Heeger chain to design topological defects at domain boundaries and at the edge. In spectroscopic experiments, we unequivocally demonstrate polariton lasing from these topological defects. This progress promises to be a paradigm shift, paving the road to interacting Boson many-body physics at ambient conditions., Comment: Main: 15 pages, 4 figures ; Suppl.: 2 pages, 2 figures

The G-protein-coupled receptor (GPCR) superfamily mediates cellular responses and communication across cellular membranes and is the largest known class of molecular targets with proven therapeutic value. For probing conformational changes of GPCRs and others in a live cell setting, fluorescence resonance energy transfer (FRET) is usually the method of choice. FRET probes often require careful labeling procedures, elaborate characterization, and assay optimization to provide both physiologically relevant probes with unaltered pharmacology and a sufficient dynamic range of the FRET changes. Here, we present an approach to optimize the energy transfer without changing the design of the FRET probe. We show that gold-coated glass coverslips reinforce the otherwise forbidden donor–acceptor energy transfer by virtual optimization of the dipole orientation. First, we confirm the resulting enhanced FRET efficiency on our nanocoatings for the inactive M1 muscarinic acetylcholine receptor (mAChR) labeled with a FRE...

Yagi-Uda antennas are a key technology for efficiently transmitting information from point to point using radio waves. Since higher frequencies allow higher bandwidths and smaller footprints, a strong incentive exists to shrink Yagi-Uda antennas down to the optical regime. Here we demonstrate electrically-driven Yagi-Uda antennas for light with wavelength-scale footprints that exhibit large directionalities with forward-to-backward ratios of up to 9.1 dB. Light generation is achieved via antenna-enhanced inelastic tunneling of electrons over the antenna feed gap. We obtain reproducible tunnel gaps by means of feedback-controlled dielectrophoresis, which precisely places single surface-passivated gold nanoparticles in the antenna gap. The resulting antennas perform equivalent to radio-frequency antennas and combined with waveguiding layers even outperform RF designs. This work paves the way for optical on-chip data communication that is not restricted by Joule heating but also for advanced light management in nanoscale sensing and metrology as well as light emitting devices., Nanoantennas have been developed to direct light, but most still rely on laboratory scale light sources. Here, the authors demonstrate electrically-driven directional emission in the optical frequency range using a nanogap in conjunction with a Yagi-Uda antenna nanostructure.

Gold nanostructures have important applications in nanoelectronics, nano-optics as well as in precision metrology due to their intriguing opto-electronic properties. These properties are governed by the bulk band structure but to some extend are tunable via geometrical resonances. Here we show that the band structure of gold itself exhibits significant size-dependent changes already for mesoscopic critical dimensions below 30 nm. To suppress the effects of geometrical resonances and grain boundaries, we prepared atomically flat ultrathin films of various thicknesses by utilizing large chemically grown single-crystalline gold platelets. We experimentally probe thickness-dependent changes of the band structure by means of two-photon photoluminescence and observe a surprising 100-fold increase of the nonlinear signal when the gold film thickness is reduced below 30 nm allowing us to optically resolve single-unit-cell steps. The effect is well explained by density functional calculations of the thickness-dependent 2D band structure of gold.

Two-dimensional electronic materials such as graphene and transition metal dichalgenides feature unique electrical and optical properties due to the conspirative effect of band structure, orbital coupling, and crystal symmetry. Synthetic matter, as accomplished by artificial lattice arrangements of cold atoms, molecules, electron patterning, and optical cavities, has emerged to provide manifold intriguing frameworks to likewise realize such scenarios. Exciton-polaritons have recently been added to the list of promising candidates for the emulation of system Hamiltonians on a semiconductor platform, offering versatile tools to engineer the potential landscape and to access the non-linear electro-optical regime. In this work, we introduce an electronically driven square and honeycomb lattice of exciton-polaritons, paving the way towards real world devices based on polariton lattices for on-chip applications. Our platform exhibits laser-like emission from high-symmetry points under direct current injection, hinting at the prospect of electrically driven polariton lasers with possibly topologically non-trivial properties.

We discuss coupling of site-selectively induced quantum emitters in exfoliated monolayers of WSe

The authors are grateful for financial support from the State of Bavaria, the German Ministry of Education and Research (BMBF) via the national project HIRT (Grant No. FKZ 13XP5003B). Mid‐infrared (MIR) resonant tunneling diode (RTD) photodetectors based on a p‐type doped AlAsSb/GaSb double‐barrier quantum well (DBQW) are proposed and investigated for their optoelectronic transport properties. At room temperature, a distinct resonant tunneling current with a region of negative differential conductance is measured. The peak‐to‐valley current ratio (PVCR) is 1.51. To provide photosensitivity within the MIR spectral region, a lattice‐matched quaternary low‐bandgap GaInAsSb absorption layer with cutoff wavelength of λ = 2.77 μm is integrated near the DBQW. Under illumination with infrared light, photogenerated minority electrons within the absorption layer can drift toward the DBQW, where they accumulate and cause a shift of the current–voltage characteristics toward smaller bias voltages, which can be exploited to measure the incident MIR light power. In a tunable diode laser absorption spectroscopy experiment, the RTD photodetector is used to identify three distinct water absorption lines in the MIR close to λ = 2.61 μm. By adjusting the absorption layer doping concentration, the RTD quantum efficiency can be increased by a factor of 10, resulting in a sensitivity of S = 2.71 A W−1, which corresponds to an estimated multiplication factor of M = 8.6. Postprint

The authors thank R. Thomale for fruitful discussions. S.K. acknowledges the European Commission for the H2020 Marie Skłodowska-Curie Actions (MSCA) fellowship (Topopolis). S.K., S.H. and M.S. are grateful for financial support by the JMU-Technion seed money program. S.H. also acknowledges support by the EPSRC ”Hybrid Polaritonics” Grant (EP/M025330/1). The Würzburg group acknowledges support by the ImPACT Program, Japan Science and Technology Agency and the State of Bavaria. T.C.H.L. and R. G. were supported by the Ministry of Education (Singapore) Grant No. 2017-T2-1-001 Topological insulators—materials that are insulating in the bulk but allow electrons to flow on their surface—are striking examples of materials in which topological invariants are manifested in robustness against perturbations such as defects and disorder1. Their most prominent feature is the emergence of edge states at the boundary between areas with different topological properties. The observable physical effect is unidirectional robust transport of these edge states. Topological insulators were originally observed in the integer quantum Hall effect2 (in which conductance is quantized in a strong magnetic field) and subsequently suggested3,4,5 and observed6 to exist without a magnetic field, by virtue of other effects such as strong spin–orbit interaction. These were systems of correlated electrons. During the past decade, the concepts of topological physics have been introduced into other fields, including microwaves7,8, photonic systems9,10, cold atoms11,12, acoustics13,14 and even mechanics15. Recently, topological insulators were suggested to be possible in exciton-polariton systems16,17,18 organized as honeycomb (graphene-like) lattices, under the influence of a magnetic field. Exciton-polaritons are part-light, part-matter quasiparticles that emerge from strong coupling of quantum-well excitons and cavity photons19. Accordingly, the predicted topological effects differ from all those demonstrated thus far. Here we demonstrate experimentally an exciton-polariton topological insulator. Our lattice of coupled semiconductor microcavities is excited non-resonantly by a laser, and an applied magnetic field leads to the unidirectional flow of a polariton wavepacket around the edge of the array. This chiral edge mode is populated by a polariton condensation mechanism. We use scanning imaging techniques in real space and Fourier space to measure photoluminescence and thus visualize the mode as it propagates. We demonstrate that the topological edge mode goes around defects, and that its propagation direction can be reversed by inverting the applied magnetic field. Our exciton-polariton topological insulator paves the way for topological phenomena that involve light–matter interaction, amplification and the interaction of exciton-polaritons as a nonlinear many-body system. Postprint

The authors acknowledge financial support from the State of Bavaria, as well as from the DFG within the Project Schn1376/3.1: Polariton based single-photon sources, and from the Danish Research Council for Technology and Production (Sapere Aude LOQIT, DFF4005-00370). The development of high quality factor solid-state microcavities with low mode volumes has paved the way towards on-chip cavity quantum electrodynamics experiments and the development of high-performance nanophotonic devices. Here, we report on the implementation of a new kind of solid-state vertical microcavity, which allows for confinement of the electromagnetic field in the lateral direction without deep etching. The confinement originates from a local elongation of the cavity layer imprinted in a shallow etch and epitaxial overgrowth technique. We show that it is possible to improve the quality factor of such microcavities by a specific in-plane bullseye geometry consisting of a set of concentric rings with sub wavelength dimensions. This design results in a smooth effective lateral photonic potential and therefore in a reduction of lateral scattering losses, which makes it highly appealing for experiments in the framework of exciton-polariton physics demanding tight spatial confinement. Postprint

Funding: State of Bavaria; H2020 European Research Council (ERC) (Project Unlimit-2D). Atomic monolayers of transition metal dichalcogenides represent an emerging material platform for the implementation of ultracompact quantum light emitters via strain engineering. In this framework, we discuss experimental results on creation of strain induced single photon sources using a WSe2 monolayer on a silver substrate, coated with a very thin dielectric layer. We identify quantum emitters that are formed at various locations in the sample. Their emission is highly linearly polarized, stable in linewidth, and decay times down to 100 ps are observed. We provide numerical calculations of our monolayer-metal device platform to assess the strength of the radiative decay rate enhancement by the presence of the plasmonic structure. We believe that our results represent a crucial step toward the ultracompact integration of high performance single photon sources in nanoplasmonic devices and circuits. Postprint

Two-level emitters are the main building blocks of photonic quantum technologies and are model systems for the exploration of quantum optics in the solid state. Most interesting is the strict resonant excitation of such emitters to control their occupation coherently and to generate close to ideal quantum light, which is of utmost importance for applications in photonic quantum technology. To date, the approaches and experiments in this field have been performed exclusively using bulky lasers, which hinders the application of resonantly driven two-level emitters in compact photonic quantum systems. Here we address this issue and present a concept for a compact resonantly driven single-photon source by performing quantum-optical spectroscopy of a two-level system using a compact high-β microlaser as the excitation source. The two-level system is based on a semiconductor quantum dot (QD), which is excited resonantly by a fiber-coupled electrically driven micropillar laser. We dress the excitonic state of the QD under continuous wave excitation, and trigger the emission of single photons with strong multi-photon suppression (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\, g^{(2)}(0) = 0.02$$\end{document}g(2)(0)=0.02) and high photon indistinguishability (V = 57±9%) via pulsed resonant excitation at 156 MHz. These results clearly demonstrate the high potential of our resonant excitation scheme, which can pave the way for compact electrically driven quantum light sources with excellent quantum properties to enable the implementation of advanced quantum communication protocols., Microlasers: tiny pillars yield practically perfect quantum light Sending encrypted quantum data over long distances is set to become more feasible using a low-cost system for generating photons one at a time. Repeating signals in a quantum network requires techniques for emitting single photons that preserve information such as polarization states. Stephan Reitzenstein from the Technische Universität Berlin, Germany, and co-workers report that bulky lasers used in typical quantum repeaters can be downsized using low-dimensional semiconductor nanostructures known as quantum dots. They fabricated micropillar structures, each containing aluminum–gallium–arsenic-based quantum dots as active medium, which produce coherent laser pulses when electrically stimulated. By directing the micropillar-driven pulses onto another quantum dot that resonates after absorbing laser light, the team triggered emission of high-quality, individual photons that may be beneficial for the implementation of long-distance quantum communication protocols.

In this work, we discuss a method to control the polarization anisotropy of spontaneous emission from neutral excitons confined in quantum-dot-like nanostructures, namely single epitaxial InAs quantum dashes emitting at telecom wavelengths. The nanostructures are embedded inside lithographically defined, in-plane asymmetric photonic mesa structures, which generate polarization-dependent photonic confinement. First, we study the influence of the photonic confinement on the polarization anisotropy of the emission by photoluminescence spectroscopy, and we find evidence of different contributions to a degree of linear polarization (DOLP), i.e., from the quantum dash and the photonic mesa, in total giving rise to $\mathrm{DOLP}=0.85$. Then, we perform finite-difference time-domain simulations of photonic confinement, and we calculate the DOLP in a dipole approximation showing well-matched results for the established model. Furthermore, by using numerical calculations, we demonstrate several types of photonic confinements where highly linearly polarized emission with DOLP of about 0.9 is possible by controlling the position of a quantum emitter inside the photonic structure. Then, we elaborate on anisotropic quantum emitters allowing for exceeding $\mathrm{DOLP}=0.95$ in an optimized case, and we discuss the ways towards efficient linearly polarized single photon source at telecom bands.

Strong coupling between excitons and photons inside a microcavity leads to the formation of cavity polaritons, hybrid light-matter particles. Under suitable conditions, polaritons can emit coherent light without population inversion, whereby polariton lasing can exhibit a threshold at least an order of magnitude less than that of conventional photon lasing in the same material. Polaritons in organic semiconductors are stable at room temperature, due to their large exciton binding energy. This renders organic materials interesting for light-mater interaction experiments at ambient conditions. In this paper, we report on polariton-lasing using fluorescent proteins embedded in a planar microcavity. The typical laser-like threshold-behavior, manifesting in an intensity nonlinearity, coherence build-up with a linewidth drop and an interactioninduced blueshift stemming from the part-matter nature of polaritons are presented. Additionally, we show the possibility to confine photonic modes inside deterministically created traps by presenting discretized mode spectra.

Researchers demonstrate an electrically driven nanoscale transmitter based on the broadband quantum shot noise of electrons tunnelling across a feed gap. Unlike radiowave antennas, so far optical nanoantennas cannot be fed by electrical generators. Instead, they are driven by light1 or indirectly via excited discrete states in active materials2,3 in their vicinity. Here we demonstrate the direct electrical driving of an in-plane optical antenna by the broadband quantum-shot noise of electrons tunnelling across its feed gap. The spectrum of the emitted photons is determined by the antenna geometry and can be tuned via the applied voltage. Moreover, the direction and polarization of the light emission are controlled by the antenna resonance, which also improves the external quantum efficiency by up to two orders of magnitude. The one-material planar design offers facile integration of electrical and optical circuits and thus represents a new paradigm for interfacing electrons and photons at the nanometre scale, for example for on-chip wireless communication and highly configurable electrically driven subwavelength photon sources.

We present antimonide-based resonant tunneling photodetectors with GaSb/AlAsSb double barrier structures and pseudomorphically grown prewell emitter structures comprising the ternary compound semiconductors GaInSb and GaAsSb. Due to the incorporation of GaInSb and GaAsSb prewell emitters, room temperature resonant tunneling with peak-to-valley current ratios of up to 2.4 are shown. The room temperature operation is attributed to the enhanced Γ-Lvalley energy separation and consequently a re-population of the Γ-conduction band of the ternary compound emitter prewell with respect to bulk GaSb. By integration of a quaternary absorption layer, RTDs photodetectors with cut-off wavelengths up to 3 μm have been realized.

Deterministic techniques enabling the implementation and engineering of bright and coherent solid-state quantum light sources are key for the reliable realization of a next generation of quantum devices. Such a technology, at best, should allow one to significantly scale up the number of implemented devices within a given processing time. In this work, we discuss a possible technology platform for such a scaling procedure, relying on the application of nanoscale quantum dot imaging to the pillar microcavity architecture, which promises to combine very high photon extraction efficiency and indistinguishability. We discuss the alignment technology in detail, and present the optical characterization of a selected device which features a strongly Purcell-enhanced emission output. This device, which yields an extraction efficiency of $\eta=(49\pm4)~\%$, facilitates the emission of photons with $(94\pm2.7)~\%$ indistinguishability., Comment: 8 pages, 5 figures. arXiv admin note: text overlap with arXiv:1512.07453

Super-resolution techniques such as direct Stochastic Optical Reconstruction Microscopy (dSTORM) have become versatile and well-established tools for biological imaging over the last century. Here, we theoretically and experimentally show that clever combination of different fluorescence modalities allows further improvements. We found that the interaction of fluorophores with plasmonic surfaces boost super-resolution performance in dSTORM approaches as it allows for tailoring the excitation and emission properties. The strength of the approach is that no further specialized microscope setup is required as the described enhancement solely rely on metal-dielectric coated glass coverslips that are straightforward to fabricate. Such biocompatible plasmonic nanolayers enhance the signal-to-noise ratio of dSTORM, and thus sharpens the localization precision by a factor of two.

The authors are grateful for financial support by the European Union (FPVII (2007-2013) under grant agreement no. 318287 LANDAUER), and the Brazilian Agencies FAPESP (grants 2012/13052 - 6, and 2012/51415 - 3), CNPq and CAPES. V. L.-R. acknowledges the support of FAPESP (grant: 2014/02112-3). Y.V.P. was supported by National Science Foundation grant ECCS-1202383. Electronic circuits composed of one or more elements with inherent memory - memristors, memcapacitors and meminductors - offer lower circuit complexity and enhanced functionality for certain computational tasks. Networks of these elements are proposed for novel computational paradigms that rely on information processing and storage on the same physical platform. We show a nanoscaled memdevice able to act as an electronic analogue of tipping buckets that allows reducing the dimensionality and complexity of a sensing problem by transforming it into a counting problem. The device offers a well adjustable, tunable and reliable periodic reset that is controlled by theamounts of transferred quantum dot charges per gate voltage sweep. When subjected to periodic voltage sweeps the quantum dot (bucket) may require up to several sweeps before a rapid full discharge occurs thus displaying period doubling, period tripling and so on between self-governing reset operations. Postprint Postprint

S.K. acknowledges the European Commission for the H2020 Marie Sklodowska-Curie Actions (MSCA) fellowship (Topopolis). The Wurzburg group acknowledges the financial support by the state of Bavaria and the Deutsche Forschungsgemeinschaft (DFG) within the project Schn1376-3.1. We study the condensation of exciton-polaritons in a two-dimensional Lieb lattice of micropillars. We show selective polariton condensation into the flatbands formed by S and Px,y orbital modes of the micropillars under non-resonant laser excitation.The real space mode patterns of these condensates are accurately reproduced bythe calculation of related Bloch modes of S- and P-flatbands. Our work emphasizes the potential of exciton-polariton lattices to emulate Hamiltonians of advanced potential landscapes. Furthermore, the obtained results provide a deeper inside into the physics of flatbands known mostly within the tight-binding limit. Postprint Postprint

We report on an on-chip routing device for propagating condensates of exciton-polaritons. This counterdirectional coupler implements signal control by a photonic microdisk potential, which couples two lithographically defined waveguides and reverses the condensate's propagation direction. By varying the structural sizes, we utilize the conjunction of the different dimensionalities to additionally evidence the functionality of a polaritonic resonant tunnel diode. Furthermore, we investigate the ultra fast dynamics of the device via ps-resolved streak camera measurements, which is distinctive for the polariton platform. This scalable, all-directional coupler element is a central building block for compact non-linear on-chip photonic architectures., Comment: This article has been accepted by Applied Physics Letters

Within this work we propose and demonstrate a technological approach to efficiently suppress excitation laser stray-light in resonance fluorescence experiments on quantum dot-micropillars. To ensure efficient stray-light suppression, their fabrication process includes a planarization step and the subsequent covering with a titanium mask to fabricate self-aligned apertures at the micropillar positions. These apertures aim at limiting laser straylight in side-excitation vertical-detection configuration, while enabling detection of the optical signal through the top facet of the micropillars. Beneficial effects of these apertures are proven and quantitatively evaluated within a statistical study in which we determine and compare the stray-light suppression of 48 micropillars with and without metal apertures. Actual resonance fluorescence experiments on single quantum dots coupled to the cavity mode prove the relevance of the proposed approach and demonstrate that it will foster further studies on cavity quantum electrodynamics phenomena under coherent optical excitation. Postprint

The authors gratefully acknowledge financial support from the European Union (FPVII (2007-2013) under Grant Agreement No. 318287 Landauer) as well as the State of Bavaria. The Brazilian authors acknowledge the support from CNPq. V.L.-R. acknowledges the support from FAPESP (Grant Nos. 2014/02112-3 and 2015/10765-0). We report the optical control of localized charge on positioned quantum dots in an electro-photo-sensitive memristor. Interband absorption processes in the quantum dot barrier matrix lead to photo-generated electron-hole-pairs that, depending on the applied bias voltage, charge or discharge the quantum dots and hence decrease or increase the conductance. Wavelength-dependent conductance control is observed by illumination with red and infrared light, which leads to charging via interband and discharging via intraband absorption. The presented memristor enables optical conductance control and may thus be considered for sensory applications in artificial neural networks as light-sensitive synapses or optically tunable memories. Postprint

We gratefully acknowledge nancial support from the European Union (FPVII, 2007- 2013) under grant agreement no 256959 NANOPOWER and grant agreement no 318287 LANDAUER as well as from the state of Bavaria. In this paper we demonstrate two realizations of a half adder based on a voltage-rectifying mechanism involving two Coulomb-coupled quantum dots. First, we examine the ranges of operation of the half adder's individual elements, the AND and XOR gates, for a single rectifying device. It allows a switching between the two gates by a control voltage and thus enables a clocked half adder operation. The logic gates are shown to be reliably operative in a broad noise amplitude range with negligible error probabilities. Subsequently, we study the implementation of the half adder in a combined double-device consisting of two individually tunable rectifiers. We show that this double device allows a simultaneous operation of both relevant gates at once. The presented devices draw their power solely from electronic fluctuations and are therefore an advancement in the field of energy efficient and autonomous electronics. Postprint

The authors gratefully acknowledge financial support from the European Union [FPVII (2007-2013) under Grant Agreement No. 318287 Landauer], as well as the state of Bavaria. We present optically and electrically tunable conductance modifications of a site-controlled quantum-dot memristor. The conductance of the device is tuned by electron localization on a quantum dot. The control of the conductance with voltage and low-power light pulses enables applications in neuromorphic and arithmetic computing. As in neural networks, applying pre- and postsynaptic voltage pulses to the memristor allows us to increase (potentiation) or decrease (depression) the conductance by tuning the time difference between the electrical pulses. Exploiting state-dependent thresholds for potentiation and depression, we are able to demonstrate a memory-dependent induction of learning. The discharging of the quantum dot can further be induced by low-power light pulses in the nanowatt range. In combination with the state-dependent threshold voltage for discharging, this enables applications as generic building blocks to perform arithmetic operations in bases ranging from binary to decimal with low-power optical excitation. Our findings allow the realization of optoelectronic memristor-based synapses in artificial neural networks with a memory-dependent induction of learning and enhanced functionality by performing arithmetic operations. Postprint

The authors acknowledge support by the European Union (FPVII (2007-2013) under G.A. n.318287 LANDAUER, and by MIUR-PRIN 2010–11 Project 2010ECA8P3 “DyNanoMag.”. M.P. and P.V. acknowledge funding from the Spanish Ministry of Economy and Competitiveness (Project No. MAT2012-36844); M.P. acknowledges support by Spanish Ministry of Economy and Competitiveness (grant BES-2013-063690). Bistable nanomagnetic switches are extensively used in storage media and magnetic memories, associating each logic state to a different equilibrium orientation of the magnetization. Here we consider the issue of the minimum energy required to change the information content of nanomagnetic switches, a crucial topic to face fundamental challenges of current technology, such as power dissipation and limits of scaling. The energy dissipated during a reset operation, also known as “Landauer erasure”, has been accurately measured at room temperature by vectorial magneto-optical measurements in arrays of elongated Permalloy nanodots. Both elliptical and rectangular dots were analysed, with lateral sizes ranging from several hundreds to a few tens of nanometers and thickness of either 10 nm or 5 nm. The experimental results show a nearly linear decrease of the dissipated energy with the dot volume, ranging from three to one orders of magnitude above the theoretical Landauer limit of kBT×ln(2). These experimental findings are corroborated by micromagnetic simulations showing that the significant deviations from the ideal macrospin behavior are caused by both inhomogeneous magnetization distribution and edge effects, leading to an average produced heat which is appreciably larger than that expected for ideal nanoswitches. Postprint

Electrically connected resonant optical antennas hold promise for the realization of highly efficient nanoscale electro-plasmonic devices that rely on a combination of electric fields and local near-field intensity enhancement. Here we demonstrate the feasibility of such a concept by attaching leads to the arms of a two-wire antenna at positions of minimal near-field intensity with negligible influence on the antenna resonance. White-light scattering experiments in accordance with simulations show that the optical tunability of connected antennas is fully retained. Analysis of the electric properties demonstrates that in the antenna gaps direct current (DC) electric fields of 10(8) V/m can consistently be achieved and maintained over extended periods of time without noticeable damage.

Funding: State of Bavaria, European Research Council [with the project unLiMIt2D (679228)]; National Research Foundation of Korea, Korean Government Grant (NRF-2016R1C1B2007007); National Science Foundation (DMR-1552220[, DMR-1838443]). We discuss coupling of site-selectively induced quantum emitters in exfoliated monolayers of WSe2 to plasmonic nanostructures. Gold nanorods of 20 nm-240 nm size, which are arranged in pitches of a few micrometers on a dielectric surface, act as seeds for the formation of quantum emitters in the atomically thin materials. We observe characteristic narrow-band emission signals from the monolayers, which correspond well with the positions of the metallic nanopillars with and without thin dielectric coating. Single photon emission from the emitters is confirmed by autocorrelation measurements, yielding g2(τ = 0) values as low as 0.17. Moreover, we observe a strong co-polarization of our single photon emitters with the frequency matched plasmonic resonances, as a consequence of light-matter coupling. Our work represents a significant step towards the scalable implementation of coupled quantum emitter-resonator systems for highly integrated quantum photonic and plasmonic applications. Publisher PDF

The authors are grateful for financial support by the state of Bavaria, and the German Ministry of Education and Research (BMBF) within the national project HIRT (FKZ 13XP5003B). We investigate the electronic transport properties of GaSb/AlAsSb double barrier resonant tunneling diodes with pseudomorphically grown ternary GaAsxSb1-x emitter prewells over a broad temperature range. At room temperature, resonant tunneling is observed and the peak to valley current ratio (PVCR) is enhanced with increasing As mole fraction from 1.88 (GaAs0.07Sb0.93 prewell), to 2.08 (GaAs0.09Sb0.91 prewell) up to 2.36 (GaAs0.11Sb0.89 prewell). The rise in PVCR is attributed to an enhanced carrier density at the Γ-valley within the emitter prewell. On the contrary at cryogenic temperatures, increasing the As mole fractions reduces the PVCR. At a temperature of T = 4.2 K, reference samples without incorporation of an emitter prewell containing As show PVCRs up to 20.4. We attribute the reduced PVCR to a degraded crystal quality of the resonant tunneling structure caused by As incorporation and subsequently an enhanced defect scattering at the interfaces. Postprint

The authors gratefully acknowledge financial support from the European Union (FPVII (2007-2013) under grant agreement n° 318287 Landauer) as well as the state of Bavaria. We present Y-shaped three-terminal floating gate transistors with positioned quantum dots (QDs) acting as floating gates. The QDs are precisely positioned in the input terminals and the localized charge controls the conductance of the transistors. Connecting two devices enables to implement associative learning by tuning the QD-charge with two input signals. The number of pulses to develop or to forget the association depends on the widths and amplitudes of the applied voltage pulses. The Y-shaped geometry of the presented device may be considered to implement synaptic functionalities without separating learning and signal transmission in time. Postprint

The authors are grateful for financial support by the state of Bavaria, the German Ministry of Education and Research (BMBF) within the national project HIRT (FKZ 13XP5003B). We present room temperature resonant tunneling of GaSb/AlAsSb double barrier resonant tunneling diodes with pseudomorphically grown prewell emitter structures comprising the ternary compound semiconductors GaInSb and GaAsSb. At room temperature, resonant tunneling is absent for diode structures without prewell emitters. The incorporation of Ga0.84In0.16Sb and GaAs0.05Sb0.95 prewell emitters leads to room temperature resonant tunneling with peak‐to‐valley current ratios of 1.45 and 1.36 , respectively. The room temperature operation is attributed to the enhanced Γ ‐L‐valley energy separation and consequently depopulation of L‐valley states in the conduction band of the ternary compound emitter prewell with respect to bulk GaSb. Postprint

This work was financially supported by the state of Bavaria, the bilateral project of the Deutsche Forschungsgemeinschaft (within the project LIEPOLATE) and the Polish Ministry of Science and higher education (Project No. DPN/N99/DFG/2010) and the EU within the project SPANGL4Q. We report on electro optical tuning of the emission from GaAs quantum wells resonantly coupled to a Tamm-plasmon mode in a hybrid metal/dielectric structure. The structures were studied via momentum resolved photoluminescence and photoreflectance spectroscopy, and the surface metal layer was used as a top gate, which allowed for a precise tuning of the quantum well emission via the quantum confined Stark effect. By tuning the resonance, we were able to observe the characteristic anticrossing behavior of a polaritonic emission in the strong light-matter coupling regime, yielding a Rabi splitting of (9.2 ± 0.2) meV. Publisher PDF

The authors gratefully acknowledge financial support from the European Union (FPVII (2007–2013) under Grant Agreement No. 318287 Landauer) as well as the state of Bavaria. A quantum dot memory based on a GaAs/AlGaAs quantum wire with site-controlled InAs quantum dots was realized by means of molecular beam epitaxy and etching techniques. By sampling of different gate voltage sweeps for the determination of charging and discharging thresholds, it was found that discharging takes place at short time scales of μs, whereas several seconds of waiting times within a distinct negative gate voltage range were needed to charge the quantum dots. Such quantum dot structures have thus the potential to implement logic functions comprising charge and time dependent ingredients such as counting of signals or learning rules. Publisher PDF