Search

A search for Dark Sectors is performed using the unique M2 beam line at the CERN Super Proton Synchrotron. New particles ($X$) could be produced in the bremsstrahlung-like reaction of high energy 160 GeV muons impinging on an active target, $\mu N\rightarrow\mu NX$, followed by their decays, $X\rightarrow\text{invisible}$. The experimental signature would be a scattered single muon from the target, with about less than half of its initial energy and no activity in the sub-detectors located downstream the interaction point. The full sample of the 2022 run is analyzed through the missing energy/momentum channel, with a total statistics of $(1.98\pm0.02)\times10^{10}$ muons on target. We demonstrate that various muon-philic scenarios involving different types of mediators, such as scalar or vector particles, can be probed simultaneously with such a technique. For the vector-case, besides a $L_\mu-L_\tau$ $Z'$ vector boson, we also consider an invisibly decaying dark photon ($A'\rightarrow\text{invisible}$). This search is complementary to NA64 running with electrons and positrons, thus, opening the possibility to expand the exploration of the thermal light dark matter parameter space by combining the results obtained with the three beams., Comment: 24 pages, 22 figures

We present the first results from a proof-of-concept search for dark sectors via invisible decays of pseudoscalar $\eta$ and $\eta'$ mesons in the NA64h experiment at the CERN SPS. Our novel technique uses the charge-exchange reaction of 50 GeV $\pi^-$ on nuclei of an active target as the source of neutral mesons. The $\eta, \eta' \to invisible$ events would exhibit themselves via a striking signature - the complete disappearance of the incoming beam energy in the detector. No evidence for such events has been found with $2.9\times10^{9}$ pions on target accumulated during one day of data taking. This allows us to set a stringent limit on the branching ratio ${\rm Br}(\eta' \to invisible) < 2.1 \times 10^{-4}$ improving the current bound by a factor of $\simeq3$. We also set a limit on ${\rm Br}(\eta \to invisible) < 1.1 \times 10^{-4}$ comparable with the existing one. These results demonstrate the great potential of our approach and provide clear guidance on how to enhance and extend the sensitivity for dark sector physics from future searches for invisible neutral meson decays., Comment: 5 pages, 3 figures

In this study, we demonstrate the potential of the NA64 experiment at CERN SPS to search for New Physics processes involving $e\rightarrow\mu$ transitions after the collision of 100 GeV electrons with target nuclei. A new Dark Sector leptonic portal in which a scalar boson $\varphi$ could be produced in the lepton-flavor-changing bremsstrahlung-like reaction, $eN\rightarrow \mu N\varphi$, is used as benchmark process. In this work, we develop a realistic Monte Carlo simulation of the NA64 experimental setup implementing the differential and total production cross-section computed at exact tree-level and applying the Weisz\"{a}cker-Williams phase space approximation. Using this framework, we investigate the main background sources and calculate the expected sensitivity of the experiment. The results indicate that with minor setup optimization, NA64 can probe a large fraction of the available parameter space compatible with the muon $g-2$ anomaly and the Dark Matter relic predictions in the context of a new Dark Sector leptonic portal with $10^{11}$ EOT. This result paves the way to the exploration of lepton-flavour-changing transitions in NA64., Comment: 11 pages, 8 figures

The inclusion of an additional $U(1)$ gauge $L_\mu-L_\tau$ symmetry would release the tension between the measured and the predicted value of the anomalous muon magnetic moment: this paradigm assumes the existence of a new, light $Z^\prime$ vector boson, with dominant coupling to $\mu$ and $\tau$ leptons and interacting with electrons via a loop mechanism. The $L_\mu-L_\tau$ model can also explain the Dark Matter relic abundance, by assuming that the $Z'$ boson acts as a "portal" to a new Dark Sector of particles in Nature, not charged under known interactions. In this work we present the results of the $Z'$ search performed by the NA64-$e$ experiment at CERN SPS, that collected $\sim 9\times10^{11}$ 100 GeV electrons impinging on an active thick target. Despite the suppressed $Z'$ production yield with an electron beam, NA64-$e$ provides the first accelerator-based results excluding the $g-2$ preferred band of the $Z'$ parameter space in the 1 keV $ < m_{Z'} \lesssim 2$ MeV range, in complementarity with the limits recently obtained by the NA64-$\mu$ experiment with a muon beam., Comment: 15 pages, 5 figures. New version with extended exclusion limits down to 1 keV in Z' mass

The development of superconducting qubit technology has shown great potential for the construction of practical quantum computers. As the complexity of quantum processors continues to grow, the need for stringent fabrication tolerances becomes increasingly critical. Utilizing advanced industrial fabrication processes could facilitate the necessary level of fabrication control to support the continued scaling of quantum processors. However, these industrial processes are currently not optimized to produce high coherence devices, nor are they a priori compatible with the commonly used approaches to make superconducting qubits. In this work, we demonstrate for the first time superconducting transmon qubits manufactured in a 300 mm CMOS pilot line, using industrial fabrication methods, with resulting relaxation and coherence times already exceeding 100 microseconds. We show across-wafer, large-scale statistics studies of coherence, yield, variability, and aging that confirm the validity of our approach. The presented industry-scale fabrication process, using exclusively optical lithography and reactive ion etching, shows performance and yield similar to the conventional laboratory-style techniques utilizing metal lift-off, angled evaporation, and electron-beam writing. Moreover, it offers potential for further upscaling by including three-dimensional integration and additional process optimization using advanced metrology and judicious choice of processing parameters and splits. This result marks the advent of more reliable, large-scale, truly CMOS-compatible fabrication of superconducting quantum computing processors., Comment: main text: 7 pages, 4 figures. bibliography: 55 references. supplement: 8 sections, 8 figures, 2 tables

The search for new comparably light (well below the electroweak scale) feebly interacting particles is an exciting possibility to explain some mysterious phenomena in physics, among them the origin of Dark Matter. The sensitivity study through detailed simulation of projected experiments is a key point in estimating their potential for discovery. Several years ago we created the DMG4 package for the simulation of DM (Dark Matter) particles in fixed target experiments. The natural approach is to integrate this simulation into the same program that performs the full simulation of particles in the experiment setup. The Geant4 toolkit framework was chosen as the most popular and versatile solution nowadays. The simulation of DM particles production by this package accommodates several possible scenarios, employing electron, muon or photon beams and involving various mediators, such as vector, axial vector, scalar, pseudoscalar, or spin 2 particles. The bremsstrahlung, annihilation or Primakoff processes can be simulated. The package DMG4 contains a subpackage DarkMatter with cross section methods weakly connected to Geant4. It can be used in different frameworks. In this paper, we present the latest developments of the package, such as extending the list of possible mediator particle types, refining formulas for the simulation and extending the mediator mass range. The user interface is also made more flexible and convenient. In this work, we also demonstrate the usage of the package, the improvements in the simulation accuracy and some cross check validations., Comment: 17 pages, 11 figures, 1 table

We report on a search for a new $Z'$ ($L_\mu-L_\tau$) vector boson performed at the NA64 experiment employing a high energy muon beam and a missing energy-momentum technique. Muons from the M2 beamline at the CERN Super Proton Synchrotron with a momentum of 160 GeV/c are directed to an active target. A signal event is a single scattered muon with momentum $<$ 80 GeV/c in the final state, accompanied by missing energy, i.e. no detectable activity in the downstream calorimeters. For a total statistic of $(1.98\pm0.02)\times10^{10}$ muons on target, no event is observed in the expected signal region. This allows us to set new limits on part of the remaining $(m_{Z'},\ g_{Z'})$ parameter space which could provide an explanation for the muon $(g-2)_\mu$ anomaly. Additionally, our study excludes part of the parameter space suggested by the thermal Dark Matter relic abundance. Our results pave the way to explore Dark Sectors and light Dark Matter with muon beams in a unique and complementary way to other experiments., Comment: 5 pages, 4 figures

We present the results of a missing-energy search for Light Dark Matter which has a new interaction with ordinary matter transmitted by a vector boson, called dark photon $A^\prime$. For the first time, this search is performed with a positron beam by using the significantly enhanced production of $A^\prime$ in the resonant annihilation of positrons with atomic electrons of the target nuclei, followed by the invisible decay of $A^\prime$ into dark matter. No events were found in the signal region with $(10.1 \pm 0.1)~\times~10^{9}$ positrons on target with 100 GeV energy. This allowed us to set new exclusion limits that, relative to the collected statistics, prove the power of this experimental technique. This measurement is a crucial first step toward a future exploration program with positron beams, whose estimated sensitivity is here presented., Comment: Version submitted to PRL

Thermal dark matter models with particle $\chi$ masses below the electroweak scale can provide an explanation for the observed relic dark matter density. This would imply the existence of a new feeble interaction between the dark and ordinary matter. We report on a new search for the sub-GeV $\chi$ production through the interaction mediated by a new vector boson, called the dark photon $A'$, in collisions of 100 GeV electrons with the active target of the NA64 experiment at the CERN SPS. With $9.37\times10^{11}$ electrons on target collected during 2016-2022 runs NA64 probes for the first time the well-motivated region of parameter space of benchmark thermal scalar and fermionic dark matter models. No evidence for dark matter production has been found. This allows us to set the most sensitive limits on the $A'$ couplings to photons for masses $m_{A'} \lesssim 0.35$ GeV, and to exclude scalar and Majorana dark matter with the $\chi-A'$ coupling $\alpha_D \leq 0.1$ for masses $0.001 \lesssim m_\chi \lesssim 0.1$ GeV and $3m_\chi \leq m_{A'}$., Comment: 7 pages, 7 figures. arXiv admin note: text overlap with arXiv:1906.00176

In this study, we present the measurement of the intrinsic hadronic contamination at the CERN SPS H4 beamline configured to transport electrons and positrons at 100 GeV/c momentum. The analysis was performed using data collected by the NA64-$e$ experiment in 2022. Our study is based on calorimetric measurements, exploiting the different interaction mechanisms of electrons and hadrons in the NA64-ECAL and NA64-HCAL detectors. We determined the intrinsic hadronic contamination by comparing the results obtained using the nominal electron/positron beamline configuration with those obtained in a dedicated setup, in which only hadrons impinged on the detector. The significant differences in the experimental signatures of electrons and hadrons motivated our approach, resulting in a small and well-controlled systematic uncertainty for the measurement. Our study allowed us to precisely determine the intrinsic hadronic contamination, which represents a crucial parameter for the NA64 experiment in which the hadron contaminants may result in non-trivial backgrounds. Moreover, we performed dedicated Monte Carlo simulations for the hadron production induced by the primary T2 target. We found a good agreement between measurements and simulation results, confirming the validity of the applied methodology and our evaluation of the intrinsic hadronic contamination.

A vector portal between the Standard Model and the dark sector is a predictive and compelling framework for thermal dark matter. Through co-annihilations, models of inelastic dark matter (iDM) and inelastic Dirac dark matter (i2DM) can reproduce the observed relic density in the MeV to GeV mass range without violating cosmological limits. In these scenarios, the vector mediator behaves like a semi-visible particle, evading traditional bounds on visible or invisible resonances, and uncovering new parameter space to explain the muon $(g-2)$ anomaly. By means of a more inclusive signal definition at the NA64 experiment, we place new constraints on iDM and i2DM using a missing energy technique. With a recast-based analysis, we contextualize the NA64 exclusion limits in parameter space and estimate the reach of the newly collected and expected future NA64 data. Our results motivate the development of an optimized search program for semi-visible particles, in which fixed-target experiments like NA64 provide a powerful probe in the sub-GeV mass range., Comment: 14 pages, 8 figures

The fabrication of superconducting circuits requires multiple deposition, etch and cleaning steps, each possibly introducing material property changes and microscopic defects. In this work, we specifically investigate the process of argon milling, a potentially coherence limiting step, using niobium and aluminum superconducting resonators as a proxy for surface-limited behavior of qubits. We find that niobium microwave resonators exhibit an order of magnitude decrease in quality-factors after surface argon milling, while aluminum resonators are resilient to the same process. Extensive analysis of the niobium surface shows no change in the suboxide composition due to argon milling, while two-tone spectroscopy measurements reveal an increase in two-level system electrical dipole moments, indicating a structurally altered niobium oxide hosting larger two-level system defects. However, a short dry etch can fully recover the argon milling induced losses on niobium, offering a potential route towards state-of-the-art overlap Josephson junction qubits with niobium circuitry., Comment: Main text: 6 pages, 3 figures, 1 table. 5 appendices, with 6 additional figures and 3 additional tables. 62 references

Silicon spin qubits are among the most promising candidates for large scale quantum computers, due to their excellent coherence and compatibility with CMOS technology for upscaling. Advanced industrial CMOS process flows allow wafer-scale uniformity and high device yield, but off the shelf transistor processes cannot be directly transferred to qubit structures due to the different designs and operation conditions. To therefore leverage the know-how of the micro-electronics industry, we customize a 300mm wafer fabrication line for silicon MOS qubit integration. With careful optimization and engineering of the MOS gate stack, we report stable and uniform quantum dot operation at the Si/SiOx interface at milli-Kelvin temperature. We extract the charge noise in different devices and under various operation conditions, demonstrating a record-low average noise level of 0.61 ${\mu}$eV/${\sqrt{Hz}}$ at 1 Hz and even below 0.1 ${\mu}$eV/${\sqrt{Hz}}$ for some devices and operating conditions. By statistical analysis of the charge noise with different operation and device parameters, we show that the noise source can indeed be well described by a two-level fluctuator model. This reproducible low noise level, in combination with uniform operation of our quantum dots, marks CMOS manufactured MOS spin qubits as a mature and highly scalable platform for high fidelity qubits., Comment: 22 pages, 13 figures

The performance of state-of-the-art superconducting quantum devices is currently limited by microwave dielectric losses at different surfaces and interfaces. {\alpha}-tantalum is a superconductor that has proven effective in reducing dielectric loss and improving device performance due to its thin low-loss oxide. However, without the use of a seed layer, this tantalum phase has so far only been realised on sapphire substrates, which is incompatible with advanced processing in industry-scale fabrication facilities. Here, we demonstrate the fabrication of high-quality factor {\alpha}-tantalum resonators directly on silicon wafers over a variety of metal deposition conditions and perform a comprehensive material and electrical characterization study. By comparing experiments with simulated resonator loss, we demonstrate that two-level-system loss is dominated by surface oxide contributions and not the substrate-metal interface. Our study paves the way to large scale manufacturing of low-loss superconducting circuits and to materials-driven advancements in superconducting circuit performance., Comment: 20 pages, 10 figures

The spin of an electron confined in semiconductor quantum dots is currently a promising candidate for quantum bit (qubit) implementations. Taking advantage of existing CMOS integration technologies, such devices can offer a platform for large scale quantum computation. However, a quantum mechanical framework bridging a device's physical design and operational parameters to the qubit energy space is lacking. Furthermore, the spin to charge coupling introduced by intrinsic or induced Spin-Orbit-Interaction (SOI) exposes the qubits to charge noise compromising their coherence properties and inducing quantum gate errors. We present here a co-modelling framework for double quantum dot (DQD) devices and their charge noise environment. We use a combination of an electrostatic potential solver, full configuration interaction quantum mechanical methods and two-level-fluctuator models to study the quantum gate performance in realistic device designs and operation conditions. We utilize the developed models together alongside the single electron solutions of the quantum dots to simulate one- and two- qubit gates in the presence of charge noise. We find an inverse correlation between quantum gate errors and quantum dot confinement frequencies. We calculate X-gate fidelities >97% in the simulated Si-MOS devices at a typical TLF densities. We also find that exchange driven two-qubit SWAP gates show higher sensitivity to charge noise with fidelities down to 91% in the presence of the same density of TLFs. We further investigate the one- and two- qubit gate fidelities at different TLF densities. We find that given the small size of the quantum dots, sensitivity of a quantum gate to the distance between the noise sources and the quantum dot creates a strong variability in the quantum gate fidelities which can compromise the device yields in scaled qubit technologies., Comment: 37 pages , 24 figures

Large-scale superconducting quantum computing systems entail high-fidelity control and readout of large numbers of qubits at millikelvin temperatures, resulting in a massive input-output bottleneck. Cryo-electronics, based on complementary metal-oxide-semiconductor (CMOS) technology, may offer a scalable and versatile solution to overcome this bottleneck. However, detrimental effects due to cross-coupling between the electronic and thermal noise generated during cryo-electronics operation and the qubits need to be avoided. Here we present an ultra-low power radio-frequency (RF) multiplexing cryo-electronics solution operating below 15 mK that allows for control and interfacing of superconducting qubits with minimal cross-coupling. We benchmark its performance by interfacing it with a superconducting qubit and observe that the qubit's relaxation times ($T_1$) are unaffected, while the coherence times ($T_2$) are only minimally affected in both static and dynamic operation. Using the multiplexer, single qubit gate fidelities above 99.9%, i.e., well above the threshold for surface-code based quantum error-correction, can be achieved with appropriate thermal filtering. In addition, we demonstrate the capability of time-division-multiplexed qubit control by dynamically windowing calibrated qubit control pulses. Our results show that cryo-CMOS multiplexers could be used to significantly reduce the wiring resources for large-scale qubit device characterization, large-scale quantum processor control and quantum error correction protocols., Comment: 16+6 pages, 4+1+5 figures, 1 table

As the superconducting qubit platform matures towards ever-larger scales in the race towards a practical quantum computer, limitations due to qubit inhomogeneity through lack of process control become apparent. To benefit from the advanced process control in industry-scale CMOS fabrication facilities, different processing methods will be required. In particular, the double-angle evaporation and lift-off techniques used for current, state-of-the art superconducting qubits are generally incompatible with modern day manufacturable processes. Here, we demonstrate a fully CMOS compatible qubit fabrication method, and show results from overlap Josephson junction devices with long coherence and relaxation times, on par with the state-of-the-art. We experimentally verify that Argon milling - the critical step during junction fabrication - and a subtractive etch process nevertheless result in qubits with average qubit energy relaxation times T1 reaching 70 $\mu$s, with maximum values exceeding 100 $\mu$s. Furthermore, we show that our results are still limited by surface losses and not, crucially, by junction losses. The presented fabrication process therefore heralds an important milestone towards a manufacturable 300 mm CMOS process for high-coherence superconducting qubits and has the potential to advance the scaling of superconducting device architectures., Comment: 13+6 pages, 3+6 figures, 0+2 tables

The coherence of state-of-the-art superconducting qubit devices is predominantly limited by two-level-system defects, found primarily at amorphous interface layers. Reducing microwave loss from these interfaces by proper surface treatments is key to push the device performance forward. Here, we study niobium resonators after removing the native oxides with a hydrofluoric acid etch. We investigate the reappearance of microwave losses introduced by surface oxides that grow after exposure to the ambient environment. We find that losses in quantum devices are reduced by an order of magnitude, with internal Q-factors reaching up to 7 $\cdot$ 10$^6$ in the single photon regime, when devices are exposed to ambient conditions for 16 min. Furthermore, we observe that Nb2O5 is the only surface oxide that grows significantly within the first 200 hours, following the extended Cabrera-Mott growth model. In this time, microwave losses scale linearly with the Nb$_2$O$_5$ thickness, with an extracted loss tangent tan$\delta$ = 9.9 $\cdot$ 10$^{-3}$. Our findings are of particular interest for devices spanning from superconducting qubits, quantum-limited amplifiers, microwave kinetic inductance detectors to single photon detectors., Comment: 5+11 pages, 5+7 figures, 0+7 tables

Quantum computers based on solid state qubits have been a subject of rapid development in recent years. In current Noisy Intermediate-Scale Quantum (NISQ) technology, each quantum device is controlled and characterised though a dedicated signal line between room temperature and base temperature of a dilution refrigerator. This approach is not scalable and is currently limiting the development of large-scale quantum system integration and quantum device characterisation. Here we demonstrate a custom designed cryo-CMOS multiplexer operating at 32 mK. The multiplexer exhibits excellent microwave properties up to 10 GHz at room and millikelvin temperatures. We have increased the characterisation throughput with the multiplexer by measuring four high-quality factor superconducting resonators using a single input and output line in a dilution refrigerator. Our work lays the foundation for large-scale microwave quantum device characterisation and has the perspective to address the wiring problem of future large-scale quantum computers., Comment: 22+11 pages, 3+5 figures, 1+1 tables