Search

This paper presents three distributed techniques to find a sparse solution of the underdetermined linear problem $\textbf{g}=\textbf{Hu}$ with a norm-1 regularization, based on the Alternating Direction Method of Multipliers (ADMM). These techniques divide the matrix $\textbf{H}$ in submatrices by rows, columns, or both rows and columns, leading to the so-called consensus-based ADMM, sectioning-based ADMM, and consensus and sectioning-based ADMM, respectively. These techniques are applied particularly for millimeter-wave imaging through the use of a Compressive Reflector Antenna (CRA). The CRA is a hardware designed to increase the sensing capacity of an imaging system and reduce the mutual information among measurements, allowing an effective imaging of sparse targets with the use of Compressive Sensing (CS) techniques. Consensus-based ADMM has been proved to accelerate the imaging process and sectioning-based ADMM has shown to highly reduce the amount of information to be exchange among the computational nodes. In this paper, the mathematical formulation and graphical interpretation of these two techniques, together with the consensus and sectioning-based ADMM approach, are presented. The imaging quality, the imaging time, the convergence, and the communication efficiency among the nodes are analyzed and compared. The distributed capabitities of the ADMM-based approaches, together with the high sensing capacity of the CRA, allow the imaging of metallic targets in a 3D domain in quasi-real time with a reduced amount of information exchanged among the nodes.

This letter presents the first experimental results of our three-dimensional (3D) millimeter-wave (mm-wave) Compressive-Reflector-Antenna (CRA) imaging system. In this prototype, the CRA is 3D-printed and coated with a metallic spray to easily introduce pseudo-random scatterers on the surface of a traditional reflector antenna (TRA). The CRA performs a pseudo random coding of the incident wavefront, thus adding spatial diversity in the imaging region and enabling the effective use of compressive sensing (CS) and imaging techniques. The CRA is fed with a multiple-input-multiple-output (MIMO) radar, which consists of four transmitting and four receiving ports. Consequently, the mechanical scanning parts and phase shifters, which are necessary in conventional physical or synthetic aperture arrays, are not needed in this system. Experimental results show the effectiveness of the prototype to perform a successful 3D reconstruction of a T-shaped metallic target., Comment: 5 pages, 6 figures

Conventional multistatic radar systems using microwave and millimeter-wave (mm-wave) frequencies seek to reconstruct the target in the imaging domain, employing many transmitting and receiving antenna elements. These systems are suboptimal, in that they do not take into consideration the large mutual information existing between the measurements. This work reports a new mm-wave radar system for high sensing capacity applications. The system is composed of a Compressive Reflector Antenna (CRA), whose surface is specially tailored by digitized Metamaterial Absorbers (MMAs). The MMA elements are designed to have a highly frequency-dispersive response in the operating band of the radar. This enables the CRA to create highly uncorrelated spatial and spectral codes in the imaging region. A semi-analytic method based on Drude-Lorentz model is used to approximate the reflection response of the MMAs. The performance of the developed radar system is evaluated in active mm-wave sensing systems by imaging PEC scatterers and an extended human-size model in the near-field of the radar. A computational method based on physical optics is established for solving the numerical examples. For reconstructing the image using compressive sensing techniques, a norm-1 regularized iterative algorithm based on the Alternating Direction Method of Multipliers (ADMM) and a Nesterov-based algorithm (NESTA) were applied.

This paper presents the design, fabrication, and experimental validation of an origami-inspired reconfigurable antenna. The proposed antenna can operate as a monopole or an inverted-L antenna, by changing its configuration. Doing so changes its operational frequency, principal radiation mode, and directivity. Measurements show that the antenna is able to change its resonance frequency from 750 MHz to 920 MHz---equivalent to 22.6\% frequency shift. Simulations are carried out to compare the radiation characteristics of the antenna (gain and radiation pattern) in both configurations. The results validate that the antenna has a reconfigurable bandwidth, which enables a better channel characterization for RF systems., Comment: 4 pages, 8 figures

This paper presents a novel norm-one-regularized, consensus-based imaging algorithm, based on the Alternating Direction Method of Multipliers (ADMM). This algorithm is capable of imaging composite dielectric and metallic targets by using limited amount of data. The distributed capabilities of the ADMM accelerates the convergence of the imaging. Recently, a Compressive Reflector Antenna (CRA) has been proposed as a way to provide high-sensing-capacity with a minimum cost and complexity in the hardware architecture. The ADMM algorithm applied to the imaging capabilities of the Compressive Antenna (CA) outperforms current state of the art iterative reconstruction algorithms, such as Nesterov-based methods, in terms of computational cost; and it ultimately enables the use of a CA in quasi-real-time, compressive sensing imaging applications., Comment: 4 pages, 4 figures