98 results on '"Mohd Zulkifli, Nurin Wahidah"'
Search Results
2. Performance and emissions assessment under full load operation of an unmodified diesel engine running on biodiesel-based waste cooking oil synthesized using JPW solid catalyst
3. Fuel production from liquefaction of polypropylene in n-hexane solvent
4. Effect of plastic pyrolytic oil and waste cooking biodiesel on tribological properties of palm biodiesel–diesel fuel blends
5. Friction and wear behavior of fluoride added Si3N4-SiC ceramic composites at elevated temperature
6. Enhancing AW/EP tribological characteristics of biolubricant synthesized from chemically modified cotton methyl-esters by using nanoparticle as additives
7. Pyrolysis of oil palm wastes for bioenergy in Malaysia: A review
8. Influence of reaction parameters on thermal liquefaction of plastic wastes into oil: A review
9. Valorization of animal manure via pyrolysis for bioenergy: A review
10. Grafting of straight alkyl chain improved the hydrophobicity and tribological performance of graphene oxide in oil as lubricant
11. Guest Editorial Preface (MYTRIBOS 2022 – Part 2)
12. Tribological characteristics comparison of formulated palm trimethylolpropane ester and polyalphaolefin for cam/tappet interface of direct acting valve train system
13. Synthesis, characterisation and tribological evaluation of surface-capped molybdenum sulphide nanoparticles as efficient antiwear bio-based lubricant additives
14. Impact of temperature and reaction time on the conversion of polystyrene waste to pyrolytic oil and its diesel engine performance, emission, and lubricity characteristics
15. Friction and wear behavior of fluoride added Si3N4-SiC ceramic composites at elevated temperature
16. Influence of intrinsic and extrinsic conditions on the tribological characteristics of diamond-like carbon coatings: A review
17. Enhancing AW/EP tribological characteristics of biolubricant synthesized from chemically modified cotton methyl-esters by using nanoparticle as additives
18. Effect of Addition of Palm Oil Biodiesel in Waste Plastic Oil on Diesel Engine Performance, Emission, and Lubricity
19. Synergistic Behavior of Graphene and Ionic Liquid as Bio-Based Lubricant Additive
20. Tribological compatibility analysis of conventional lubricant additives with palm trimethylolpropane ester (TMP) and tetrahedral amorphous diamond-like carbon coating (ta-C)
21. Investigation of the tribochemical interactions of a tungsten-doped diamond-like carbon coating (W-DLC) with formulated palm trimethylolpropane ester (TMP) and polyalphaolefin (PAO)
22. Tribological compatibility analysis of conventional lubricant additives with palm trimethylolpropane ester (TMP) and tetrahedral amorphous diamond-like carbon coating (ta-C).
23. Micro-abrasive Surface for Producing Microplastics for Testing
24. The Investigation About Formation Mechanism of Tribofilm Induces Super-Lubricity of DLC Films Sliding Against ZrO2 in Vaporized Ethanol Environment
25. The Effect of Thickener Composition Ratios on the Rheological Behaviour of Palm Bio-Grease Formulation
26. The Comparison of Tribological Characteristics of TMP Based Cotton-Bio Lubricant and Commercial Lubricant for Cylinder Liner-Piston Ring Combination
27. Effect of Surface Texturing on the Morphology and Wettability Properties of Plasma Sprayed TiO2 Coating
28. The Permeability of Palm Oil Through Open Cell Aluminum Foam Under the Influence of Gravity
29. Demographic Changes by the Vickers Microhardness Surface Indentations on the TiC Metal Matrix Composite TIG Melted Track
30. Literature Survey on Manufacturing Alumina/Aluminum MMC by Stir Casting and Their Wear Behaviors with and Without Solid Lubrication
31. Numerical Analysis on Deformation Behavior of High Entropy Alloy (HEA) Under Compression Test
32. Skin Characteristics Analysis Using 3D Skin Analyzer: Pores and Sebum
33. Wear Performance of Alumina-Zirconia, Alumina-Zirconia-Chromia and Alumina-Zirconia-Magnesia in Machining AISI 1045 Steel
34. Compatibility Study on Cobalt Alloy Coating Due to Different Current Distribution in Electroplating
35. Performance of Bayah Natural Zeolite in Biolubricant Synthesis of Palm Kernel Oil
36. Biomimetic Comparison of Animals and Plants
37. Wear Mechanism of Treated Oil Palm Empty Fruit Bunch Fibre Reinforced Polyoxymethylene Composite
38. Improving Thermal and Tribological Properties of Enhanced Biolubricant with Graphene and Maghemite Nano-additives
39. A Study of Palm Oil and Engine Oil Viscosity Effect by Using CFD
40. Effect of Surface Texturing on Organic Carbon Nanotubes Tribological Performance on Sliding Contact Lubrication
41. Palm Kernel Oil Based Lubricant: The Role of Fe Modified on Y-Zeolite During Synthesis
42. Optimization of Machining Parameters During Milling of Carbon Fibre Reinforced Plastics (CFRP)
43. Microstructure Development and Wear Behavior of Al-15% Mg2Si-xGd Composites Before and After Hot Extrusion
44. Tribological Performance of Palm Olein with Additive Using Linear Reciprocating Tribotester
45. Effect of Activator Pre-treatment to the Cobalt Alloys Coating Performance
46. Soot Emissions and Time Taken for Extinguishing from Ignition of Treated Candle Waste Cooking Oil (WCO)-Based
47. Tribological Performance of Hybrid Ti3C2/Graphene Additive on Outboard Engine Oil
48. The Tribofilm Formation of MoS2 Nanolubricant in Boundary Lubrication Regime
49. Bioinspired Surface for Cell Overlay and the Tribological Performances
50. The Influence of Engineered Tool Surfaces in Ironing
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.