Search

Samantha Lo,1 Ebrahim Mahmoudi,2 Looi Qi Hao,1,3 Fatimah Mohd Nor,4 Mh Busra Fauzi1,5 1Centre for Tissue Engineering Centre and Regenerative Medicine, Faculty of Medicine, Universiti Kebangsaan Malaysia, Cheras, Kuala Lumpur, 56000, Malaysia; 2Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor Darul Ehsan, 43600, Malaysia; 3My Cytohealth Sdn. Bhd, Kuala Lumpur, 56000, Malaysia; 4Plastic Surgery Department, Kumpulan Perubatan Johor Ampang Puteri Specialist Hospital, Kuala Lumpur, 68000, Malaysia; 5Advance Bioactive Materials-Cells (Adv-BioMaC) UKM Research Group, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, MalaysiaCorrespondence: Mh Busra Fauzi, Email fauzibusra@ukm.edu.myObjective: Collagen, a widely used natural biomaterial polymer in skin tissue engineering, can be innovatively processed into nanocollagen through cryogenic milling to potentially enhance skin tissue healing. Although various methods for fabricating nanocollagen have been documented, there is no existing study on the fabrication of nanocollagen via cryogenic milling, specifically employing graphene oxide as separators to prevent agglomeration.Methods: In this study, three research groups were created using cryogenic milling: pure nanocollagen (Pure NC), nanocollagen with 0.005% graphene oxide (NC + 0.005% GO), and nanocollagen with 0.01% graphene oxide (NC+0.01% GO). Characterization analyses included transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), zeta potential (ZP), and polydispersity index (PDI).Results: TEM and SEM analysis revealed that nanocollagen groups alone exhibited particle sizes of less than 100 nm. FTIR spectroscopic investigations indicated the presence of amide A, B, and I, II, and III (1800 to 800 cm− 1) in all nanocollagen study groups, with the characteristic C-O-C stretching suggesting the incorporation of graphene oxide (GO). XRD data exhibited broadening of the major peak as the proportion of GO increased from pure NC to the nanocollagen groups with GO. Zeta potential measurements indicated electrostatic attraction of the samples to negatively charged surfaces, accompanied by sample instability. PDI results depicted size diameters ranging from 800 to 1800 nm, indicating strong polydispersity with multiple size populations.Conclusion: This research demonstrated that collagen can be successfully fabricated into nanoparticles with sizes smaller than 100 nm.Keywords: nanocollagen, cryogenic milling, graphene oxide

Environmental monitoring of pesticide residues has become increasingly crucial for ensuring food safety and environmental sustainability. Current demands are not met by traditional analytical tools, but the integration of smartphones, due to their small size, high accessibility, fast processing speed, and powerful imaging capacity, holds significant potential for on-site detection of pesticide residues. This review provides a comprehensive overview of the latest developments in the application of molecularly imprinted polymer (MIP) sensors equipped with smartphones for the detection of pesticide residues in environmental samples, covering the period from 2018 to 2024. The review encompasses recent advancements in MIP synthesis, sensor fabrication, and the incorporation of principles for improved signal precision with the integration of smartphones based on sensing signals (optical and electrochemical signals). Additionally, the diverse range of environmental samples were explored, including water, soil, and crops, where MIP sensors have demonstrated their efficacy in detecting pesticides. The potential for real-time monitoring and the challenges associated with deploying these sensors at lab scale are discussed. Overall, this review highlights the transformative impact of MIP sensors with smartphone-based detection in the field of pesticide residue analysis, paving the way for enhanced environmental monitoring practices.

Cellulose nanofibrils (CNF) are promising renewable materials due to their high surface area, abundance, and ease of modification. This study explores the impact of source material on CNF properties for diverse applications like drug delivery and composites. CNF were prepared from corn cob (CC), bagasse (BG), waste wood (WW), and bacterial cellulose (BC) using TEMPO-mediated oxidation. Microcrystalline cellulose (MCC) was also oxidized (MCC-ox) for comparison. The transparency, chemical structure, crystallinity index, and surface charge of the resulting CNF were investigated. As a result, all CNF yields ranged from 25 % to 34 %. FT-IR analysis confirmed successful TEMPO oxidation by detecting carboxyl groups on all CNF surfaces. BC-derived CNF displayed the second-highest transparency after MCC. Surface charge analysis revealed the highest carboxyl content in MCC-ox (8828.39 mmol/kg), followed by CNF-BC (8438.84 mmol/kg), CNF-CC (7687.24 mmol/kg), CNF-WW (6720.43 mmol/kg), and CNF-BG (5505.61 mmol/kg). XRD analysis indicated the highest crystallinity index in MCC-ox (83.40 %) due to its high purity, followed by CNF-BC (82.52 %) likely due to its nanostructure and high purity, and CNF-CC (78.14 %) potentially due to the rigid and dense structure of corn cobs. These findings provide valuable insights into selecting CNF with the desired characteristics for various fields such as material science, nanotechnology, and biomedicine.

ABSTRACTThe materials sector has grown significantly over the last few decades. One from the community worldwide has embraced using natural fibers and biopolymers in many products due to significant problems with petroleum supplies and concerns about using synthetic plastics as biomaterials. The availability of lignocellulosic fiber polymer composites worldwide, in addition to their low carbon emissions and biodegradability, has caught the enthusiasm of scientists and engineers. One of the main crops grown in Indonesia is oil palm, which has the potential to provide lignocellulosic fibers for composites. The increase in fiber increased the mechanical properties of the composite. The compatibility of OPEFB with other materials in the composite is essential to ensure specific applications. There is still a little detailed examination of the mechanical properties of OPEFB biocomposite and factors, including polymer type and fiber size, that can impact mechanical performance. However, according to various articles, OPEFB is a potential raw material for reinforcing material in composites without being continuously developed, so research innovations on OPEFB composites are needed.

Antimicrobial resistance (AMR) is a growing and concerning threat to global public health, necessitating innovative strategies to combat this crisis. Amidine-containing compounds have emerged as promising agents in the battle against AMR. This review gives a summary of recent advances from the past decade in studies of antimicrobial amidine-containing compounds with the aim to feature their structural diversity and the pharmacological relevance of the moiety to antimicrobial activity and their potential use in combating antimicrobial resistance, to the greatest extent possible. Highlighting is put on chemical structure of such compounds in relation to antimicrobial activities such as antibacterial, antifungal, and antiparasitic activities. Researchers commonly modify molecules containing amidine or incorporate amidine into existing antimicrobial agents to enhance their pharmacological attributes and combat antimicrobial resistance. This comprehensive review consolidates the current knowledge on amidine-containing compounds, elucidating their antimicrobial mechanisms and highlighting their promise in addressing the global AMR crisis. By offering a multidisciplinary perspective, we aim to inspire further research and innovation in this critical area of antimicrobial research.

Nitrocellulose (NC) has garnered significant interest among researchers due to its versatile applications, contingent upon the degree of nitration that modifies the cellulose structure. For instance, NC with a high nitrogen content, exceeding 12.5%, finds utility as a key ingredient in propellant formulations, while variants with lower nitrogen content prove suitable for a range of other applications, including the formulation of printing inks, varnishes, and coatings. This communication aims to present the outcomes of our efforts to optimize the nitration reaction of bacterial cellulose to produce high-nitrogen-content NC, employing the response surface methodology (RSM). Our investigation delves into the influence of the mole ratio of sulfuric and nitric acids, reaction temperature, and nitration duration on the nitrogen content of the resultant products. Utilizing a central composite design (CCD), we identified the optimal conditions for NC synthesis. Analysis of variance (ANOVA) underscored the substantial impact of these reaction conditions on the percentage of nitrogen content (%N) yield. By implementing the predicted optimal conditions—namely, a H2SO4:HNO3 mole ratio of 3:1, a reaction temperature of 35 °C, and a reaction period of 22 min—we successfully produced NC with a nitrogen content of 12.64%. Characterization of these products encompassed elemental analysis, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and field emission scanning electron microscopy (FESEM).

Nanocellulose has emerged in recent years as one of the most notable green materials available due to its numerous appealing factors, including its non-toxic nature, biodegradability, high aspect ratio, superior mechanical capabilities, remarkable optical properties, anisotropic shape, high mechanical strength, excellent biocompatibility and tailorable surface chemistry. It is proving to be a promising material in a range of applications pertinent to the material engineering to biomedical applications. In this review, recent advances in the preparation, modification, and emerging application of nanocellulose, especially cellulose nanocrystals (CNCs), are described and discussed based on the analysis of the latest investigations. This review presents an overview of general concepts in nanocellulose-based nanocomposites for sustainable applications. Beginning with a brief introduction of cellulose, nanocellulose sources, structural characteristics and the extraction process for those new to the area, we go on to more in-depth content. Following that, the research on techniques used to modify the surface properties of nanocellulose by functionalizing surface hydroxyl groups to impart desirable hydrophilic–hydrophobic balance, as well as their characteristics and functionalization strategies, were explained. The usage of nanocellulose in nanocomposites in versatile fields, as well as novel and foreseen markets of nanocellulose products, are also discussed. Finally, the difficulties, challenges and prospects of materials based on nanocellulose are then discussed in the last section for readers searching for future high-end eco-friendly functional materials.

Sugar palm (Arenga pinnata) fibre is considered as a waste product of the agricultural industry. This paper is investigating the isolation of nanofibrillated cellulose from sugar palm fibres produced by a chemo-mechanical approach, thus opening a new way to utilize waste products more efficiently. Chemical pre-treatments, namely delignification and mercerization processes, were initially involved to extract the sugar palm cellulose. Then, mechanical pre-treatment was performed by passing the sugar palm cellulose through a refiner to avoid clogging in the subsequent process of high pressurized homogenization. Nanofibrillated cellulose was then characterized by its chemical properties (Fourier transform infrared spectroscopy), physical morphological properties (i.e. scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis), and thermogravimetric analysis. The nanofibres were attained at 500 bar for 15 cycles with 92% yield. The results showed that the average diameter and length of the nanofibrillated cellulose were found to be 5.5 ± 1.0 nm and several micrometres, respectively. They also displayed higher crystallinity (81.2%) and thermal stability compared to raw fibres, which served its purpose as an effective reinforcing material for use as bio-nanocomposites. The nanocellulose developed promises to be a very versatile material by having a huge potential in many applications, encompassing bio-packaging to scaffolds for tissue regeneration. Keywords: Agricultural waste, Sugar palm fibre, Nanocellulose, Sugar palm nanofibrillated cellulose, High pressurized homogenization (HPH)

Tissue engineering products have grown rapidly as an alternative solution available for chronic wound and burn treatment. However, some drawbacks include additional procedures and a lack of antibacterial properties that can impair wound healing, which are issues that need to be tackled effectively for better wound recovery. This study aimed to develop a functionalized dual-layered hybrid biomatrix composed of collagen sponge (bottom layer) to facilitate cell proliferation and adhesion and gelatin/cellulose hydrogel (outer layer) incorporated with graphene oxide and silver nanoparticles (GC-GO/AgNP) to prevent possible external infections post-implantation. The bilayer hybrid scaffold was crosslinked with 0.1% (w/v) genipin for 6 h followed by advanced freeze-drying technology. Various characterisation parameters were employed to investigate the microstructure, biodegradability, surface wettability, nanoparticles antibacterial activity, mechanical strength, and biocompatibility of the bilayer bioscaffold towards human skin cells. The bilayer bioscaffold exhibited favourable results for wound healing applications as it demonstrated good water uptake (1702.12 ± 161.11%), slow rate of biodegradation (0.13 ± 0.12 mg/h), and reasonable water vapour transmission rate (800.00 ± 65.85 gm−2 h−1) due to its porosity (84.83 ± 4.48%). The biomatrix was also found to possess hydrophobic properties (48.97 ± 3.68°), ideal for cell attachment and high mechanical strength. Moreover, the hybrid GO-AgNP promoted antibacterial properties via the disk diffusion method. Finally, biomatrix unravelled good cellular compatibility with human dermal fibroblasts (>90%). Therefore, the fabricated bilayer scaffold could be a potential candidate for skin wound healing application.

This project is about to develop an airship based on small size remotely controlled by human. The airship is one of Unmanned Airship Vehicle (UAV) which is can be apply in advertising, VIP security inspection, traffic monitoring and management and so on. The main purpose of this project is to design and develop an autonomous UAV airship for indoor surveillance and monitoring applications. The image will be captured from wireless camera where it mounted at a bottom of gondola. To determine the centroid points of the object are implemented in three phase edge detector, canny operator and threshold. The object will be display on Graphical User Interface (GUI) in 2D coordinated. In this project the systems able to detect only one object at one time.

Cellulose microfiber (MF) formation by electrospinning is affected by several factors. In this paper, fabrication of MF from oil palm mesocarp fiber (OPMF), a biomass residue abundantly available at the palm oil mill, was conducted by electrospinning. The effect of OPMF-cellulose solution properties on the spinnability of the solution was determined. Extracted cellulose from OPMF was dissolved in four different formulations of ionic liquids: (i) ([EMIM]Cl), (ii) ([EMIM][Cl):DMF, (iii) ([EMIM]Cl):([C10MIM][Cl]), and (iv) ([EMIM]Cl):([C10MIM][Cl]):DMF at cellulose concentrations of 1% to 9% (w/v). Scanning electron microscopy (SEM) analysis showed that MF formed had diameter sizes ranging from 200 to 500 nm. MF was formed only at 6% (w/v) cellulose concentration, when DMF was mixed in the solution. The results showed that cellulose concentration and viscosity played major roles in the spinnability of cellulose solution, in which too high viscosity of the cellulose solution caused failure of the electrospinning process and eventually affected the formation of MF. The characteristics of MF obtained herein suggest the potential of OPMF cellulose as a starting material for the production of MF.

Postmortem analysis of C-reactive protein (CRP) in autopsies has been extensively researched for its potential utility. This analysis could aid forensic pathologists in screening for and investigating the potential infectious or inflammatory causes of death, thereby guiding appropriate autopsy procedures. To assess the diagnostic accuracy of postmortem CRP analysis in autopsy settings, a thorough electronic literature search was conducted across databases such as PubMed, Scopus, Web of Science, and Cochrane Library. Two independent reviewers screened eligible studies, followed by a methodological quality assessment using the QUADAS-2 checklist. Utilising a random-effects model, hierarchical summary receiver operating characteristic (HSROC) curve analysis and bivariate model meta-analysis were performed to evaluate heterogeneity across studies. Of the 1286 studies initially identified, nine met the eligibility criteria for the final analysis. The pooled sensitivity of postmortem CRP analysis was 0.93 (95% CI, 0.76, 0.98), with a pooled specificity of 0.80 (95% CI, 0.71, 0.87). The prevalence across studies ranged from 0.23 to 0.68, with a median of 0.5. Moderate variability was observed in the heterogeneity assessment across the primary studies. In summary, the study findings indicate that postmortem serum CRP analysis demonstrates high diagnostic accuracy with moderate heterogeneity. Additionally, postmortem CRP testing may be useful as a screening tool in autopsy practice to rule out the likelihood of sepsis., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Introduction: The prevalence of suicide presents a significant public health challenge globally, affecting diverse populations around the world. This study is motivated by the urgency to tackle suicide as a crucial public health issue on a global level, according to the United Nations Sustainable Development Goals and the General Programme of Work and Mental Health Action by the World Health Organization., Materials and Methods: The research was performed at the Forensic Unit of Hospital Canselor Tuanku Muhriz, spanning a retrospective analysis covering 2012 to 2021. A descriptive analysis was conducted to analyse the patterns of suicide and the sociodemographic characteristics of the cases., Results: The findings show monthly variations and a recent increase in suicide rates, especially during the pandemic of COVID-19. Analysis of suicide methods indicates that hanging is the most common suicide method, which accounts for almost half of the sample population, followed by jumping from a height and burning charcoal. Adult males are primarily implicated in suicidal acts, and the study reveals unique trends among different age groups, genders and employment statuses., Conclusion: This study aims to offer thorough insights and comprehension into suicide within the Malaysian sociodemographic framework. Consequently, it could furnish valuable insights for public health authorities and governmental bodies.

Background: Concerted efforts have been undertaken to reduce the human immunodeficiency virus (HIV) infection by the year 2030 in Malaysia. A situational analysis of the performance of successful HIV treatment and its determinants is vital; however, this information remains scarce. This study aimed to identify the determinants of undetectable viral load among people living with HIV (PLHIV)., Methods: Newly diagnosed HIV cases ( n = 493) registered under the Malaysia HIV/AIDS-related national databases from June 2018 to December 2019 were studied. The deterministic matching method was applied to link the records in two national databases (at Kuala Lumpur and Putrajaya Federal Territories Health Department, JKWPKLP HIV line-listing database and National AIDS Registry). Successful HIV treatment, an outcome variable, was measured by the undetectable viral load < 200 copies/mL after 1 year of antiretroviral therapy initiation. Logistic regression analysis was applied in the current study., Results: Results showed that 454/493 (92.2%; 95% confidence interval [CI]: 89.8%, 94.6%) PLHIV had successful HIV treatment. Study participants had a mean (SD) age of 30 (8.10) years old, predominantly male (96.1%) and sexually transmission (99.9%). The multiple logistic regression analysis revealed two significant determinants including the timing of ART initiation (AOR = 3.94; 95% CI: 1.32, 11.70; P = 0.014) and establishment of Sexually Transmitted Infection Friendly Clinic (STIFC) (AOR = 3.40; 95% CI: 1.47, 7.85; P = 0.004). Non-significant variables included gender, education level, HIV risk exposure, and co-infections of tuberculosis and Hepatitis C., Conclusion: JKWPKLP is on the right track to achieving universal treatment as a prevention strategy. Reinforcement of early ART initiation and establishment of STIFC are recommended., Competing Interests: Conflict of Interest None., (© Penerbit Universiti Sains Malaysia, 2023.)

Pulmonary Tuberculosis (PTB) is an endemic disease in Malaysia and continues to cause great morbidity and mortality. However, the diagnosis and treatment may pose a challenge to the attending physician since other diseases such as melioidosis can mimic tuberculosis. Hence, the final diagnosis should be done thorough history of illness, physical examination, investigations, and interpretation of findings. We present here a case of a 27-year-old man who presented at our primary care clinic with underlying diabetes mellitus whose symptoms were suggestive of PTB, and who was treated with anti-tuberculosis but later his sputum grew culture Burkholderia pseudomallei.

Death-in-custody refers to the occurrence of death, while a person is under the custody of any enforcement agency. Their incidence often creates overwhelming public and media attention. Currently, there is no standardised definition of 'death-in-custody' in Malaysia and internationally. A crosssectional descriptive study was performed in the Department of Forensic Medicine Hospital Tuanku Ja'afar Seremban (HTJS) for a period of 24 months. Information on all custodial deaths registered at HTJS from January 2001 till December 2015 was selected from the in-house hospital death registration system. The definition of 'death-in-custody' used was guided by the recommendation by the 'Australian Royal Commission into Aboriginal Deaths in Custody' 1991 with few adjustments. Four custodial settings of interest (the police, prison, immigration depot for the illegal immigrant, and army custody) were studied. A total of 172 deaths-in-custody were collected, in which the majority of cases were natural deaths (84.88%), predominantly infective in nature (65.07%). Less than 1/6 th of cases were unnatural deaths with more than 80% died from legal intervention. All custodial deaths were dominated by males (96.51%) with a mean and median age of 37 years. In terms of nationality, 52.91% of the deaths involved Malaysian citizens in which the 'Malay/Bumi' race outnumbered the other two main races. The most documented custodial deaths occurred in prison (44.19%) followed by immigration depots (38.37%) and police lock-ups (17.44%). This study provides a general overview of the pattern including the causes and the demographic profile involving death in custody in the Seremban district registered at HTJS.

Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Introduction: Stature estimation is population dependent, and population-specific regression equations should be generated for accurate anthropological assessments. Nevertheless, stature estimation data was inaccessible and limited in some of the South-East Asian countries. The systematic review was conducted to analyse the regression equations of stature estimations developed in South-East Asian region., Materials and Methods: A systematic literature search was performed through SCOPUS database and Google Scholar from January till March 2018. All published articles which developed stature estimation from different types of bone, methods and type of statures (i.e. living stature, forensic stature and cadaveric stature) were included in this study. Risks of biases were also assessed. Population studies with no regression equations were excluded from the study., Results: Seven studies that met the inclusion criteria were identified. In the South-East Asia region, regression equations for stature estimation were developed in Thailand and Malaysia. In these studies, bone measurements were done either by radiography, direct bone measurement, or palpation on body surface for anatomical bony prominence. All of these studies used various parts of bones for stature estimation., Conclusion: The most widely used regression equations for stature estimation in South-East Asian population were from the Thailand population. Further research is recommended to develop regression equations for other South-East Asian countries.

The Gram-negative pathogenic spirochetal bacteria Leptospira spp. cause leptospirosis in humans and livestock animals. Leptospira kmetyi strain LS 001/16 was isolated from a soil sample associated with a leptospirosis patient in Kelantan, which is among the states in Malaysia with a high reported number of disease cases. Here, we report the complete genome sequence of Leptospira kmetyi strain LS 001/16., (Copyright © 2019 Yusof et al.)

Melioidosis is an infectious disease caused by Burkholderia pseudomallei, a gram-negative intracellular bacillus. Tuberculosis, also an infectious disease, is caused by Mycobacterium tuberculosis, an acid fast bacillus. In both diseases, patients commonly present with fever and respiratory symptoms due to sepsis which might lead to respiratory failure or sudden death if left untreated. Not only are these two entities similar in clinical presentation, but the autopsy findings may mimic each other, giving rise to difficulties in determining the cause of death. We report a case of melioidosis and compare it to a typical case of miliary tuberculosis. Similarities between the cases on gross and histopathological examinations are discussed. In such circumstances, microbiological culture of bodily fluids and internal organs should be performed to ascertain the correct cause of death.

Background: Gamat (sea-cucumber) is a natural occurring fauna which is popularly used as traditional medication in Southeast Asian countries. There have been many animal studies done on its' biochemical properties and its' effects in vivo. The effect of gamat on human cutaneous wounds was studied using a split-skin graft donor site wound., Methods: This was a comparative case-control study done on patients in Hospital Universiti Sains Malaysia (Hospital USM), requiring split-thickness skin grafting, whereby, the skin graft donor site was divided to almost equal halves, and applied with both gamat-based gel on one side, with Duoderm ® hydrogel on the other side. The epithelialization of the wounds was observed and compared on days 10, 14 and 21. Pain score, and pruritus score were also observed. Repeated measure analysis of variance (ANOVA) test and Paired t-test was used to test statistical significance accordingly., Results: No significant differences were seen in rates of epithelialization of wounds on days 10, 14 and 21 (p > 0.01). No significant difference was also seen in the pain score and pruritus score (p > 0.01)., Conclusions: A gamat-based gel is comparable to conventional hydrogels in treatment of split-skin graft donor site. No adverse effects were observed in either group., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

We present a case of a fatal motor vehicle collision of a 22-year-old car driver, who died at the scene after losing control of his car, and subsequently collided with a tree by the roadside. The subsequent autopsy revealed penetrating injuries on the neck, severing the larynx, carotid artery, jugular vein and fracturing the cervical vertebrae. Internal examination showed the offending material to be a semi-cylindrical metal fragment, which had lodged within the paravertebral muscle. Examination of the car with the authorities found that the metal fragment originated from a defective airbag booster cannister, which shattered upon deployment., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Introduction: The first step in the forensic identification is sex determination followed by age and stature estimation, as both are sex-dependent. The mandible is the largest, strongest and most durable bone in the face. Mandible is important for sex confirmation in absence of a complete pelvis and skull., Aim: The aim of the present study was to determine sex of human mandible from morphology, morphometric measurements as well as discriminant function analysis from the CT scan., Materials and Methods: The present retrospective study comprised 79 subjects (48 males, 31 females), with age group between 18 and 74 years, and were obtained from the post mortem computed tomography data in the Hospital Kuala Lumpur. The parameters were divided into three morphologic and nine morphometric parameters, which were measured by using Osirix MD Software 3D Volume Rendering., Results: The Chi-square test showed that men were significantly association with square-shaped chin (92%), prominent muscle marking (85%) and everted gonial glare, whereas women had pointed chin (84%), less prominent muscle marking (90%) and inverted gonial glare (80%). All parameter measurements showed significantly greater values in males than in females by independent t-test (p< 0.01). By discriminant analysis, the classification accuracy was 78.5%, the sensitivity was 79.2% and the specificity was 77.4%. The discriminant function equation was formulated based on bigonial breath and condylar height, which were the best predictors., Conclusion: In conclusion, the mandible could be distinguished according to the sex. The results of the study can be used for identification of damaged and/or unknown mandible in the Malaysian population.

Background: CYP3A5 is the predominant sub-family of biotransformation enzymes in the liver and the genetic variations in CYP3A5 are an important determinant of inter-individual and inter-ethnic differences in CYP3A-mediated drug disposition and response., Aim: This study aims to investigate the genetic polymorphisms of CYP3A5 among the Orang Asli in Peninsular Malaysia using a next generation sequencing platform., Methods: Genomic DNAs were extracted from blood samples of the three main Orang Asli tribes and whole-genome sequencing was performed., Results: A total of 61 single nucleotide polymorphisms were identified and all the SNPs were located in introns except rs15524, which is in the 3'UTR, and 11 of these polymorphisms were novel. Two allelic variants and three genotypes were identified in the Orang Asli. The major allelic variant was the non-functional CYP3A5*3 (66.4%). The percentages of Orang Asli with CYP3A5*3/*3 (47.2%) and CYP3A5*1/*3 (38.1%) genotypes are more than twice the percentage of Orang Asli with CYP3A5*1/*1 (14.8%) genotype. Almost half of the Orang Asli harboured CYP3A5 non-expressor genotype (CYP3A5*3/*3)., Conclusions: The predominance of the CYP3A5 non-expressor genotype among the Orang Asli was unravelled and the findings in this study may serve as a guide for the optimisation of pharmacotherapy for the Orang Asli community.

Aims: CYP2D6 is one of the major enzymes in the cytochrome P450 monooxygenase system. It metabolizes ∼25% of prescribed drugs and hence, the genetic diversity of a CYP2D6 gene has continued to be of great interest to the medical and pharmaceutical industries. This study was designed to perform a systematic analysis of the CYP2D6 gene in six subtribes of the Malaysian Orang Asli., Methods: Genomic DNAs were extracted from the blood samples followed by whole-genome sequencing. The reads were aligned to the reference human genome hg19 and variants in the CYP2D6 gene were analyzed. CYP2D6*5 and duplication of CYP2D6 were analyzed using previously established methods., Results: A total of 72 single nucleotide polymorphisms were identified. CYP2D6*1, *2, *4, *5, *10,*41, and duplication of the gene were found in the Orang Asli, whereby CYP2D6*2 and *41 alleles are reported for the first time in the Malaysian population., Conclusion: The findings in this study provide insights into the genetic polymorphisms of CYP2D6 in the Orang Asli of Peninsular Malaysia.

Introduction: Stature is one of the characteristics that could be used to identify human, besides age, sex and racial affiliation. This is useful when the body found is either dismembered, mutilated or even decomposed, and helps in narrowing down the missing person's identity., Aim: The main aim of the present study was to construct regression functions for stature estimation by using lower limb bones in the Malaysian population., Materials and Methods: The sample comprised 87 adult individuals (81 males, 6 females) aged between 20 to 79 years. The parameters such as thigh length, lower leg length, leg length, foot length, foot height and foot breadth were measured. They were measured by a ruler and measuring tape. Statistical analysis involved independent t-test to analyse the difference between lower limbs in male and female. The Pearson's correlation test was used to analyse correlations between lower limb parameters and stature, and the linear regressions were used to form equations. The paired t-test was used to compare between actual stature and estimated stature by using the equations formed., Results: Using independent t-test, there was a significant difference (p< 0.05) in the measurement between males and females with regard to leg length, thigh length, lower leg length, foot length and foot breadth. The thigh length, leg length and foot length were observed to have strong correlations with stature with p= 0.75, p= 0.81 and p= 0.69, respectively. Linear regressions were formulated for stature estimation. Paired t-test showed no significant difference between actual stature and estimated stature., Conclusions: It is concluded that regression functions can be used to estimate stature to identify skeletal remains in the Malaysia population.

The human cytochrome P450 (CYP) is a superfamily of enzymes that have been a focus in research for decades due to their prominent role in drug metabolism. CYP2C is one of the major subfamilies which metabolize more than 10% of all clinically used drugs. In the context of CYP2C19, several key genetic variations that alter the enzyme's activity have been identified and catalogued in the CYP allele nomenclature database. In this study, we investigated the presence of well-established variants as well as novel polymorphisms in the CYP2C19 gene of 62 Orang Asli from the Peninsular Malaysia. A total of 449 genetic variants were detected including 70 novel polymorphisms; 417 SNPs were located in introns, 23 in upstream, 7 in exons, and 2 in downstream regions. Five alleles and seven genotypes were inferred based on the polymorphisms that were found. Null alleles that were observed include CYP2C19*3 (6.5%), *2 (5.7%) and *35 (2.4%) whereas allele with increased function *17 was detected at a frequency of 4.8%. The normal metabolizer genotype was the most predominant (66.1%), followed by intermediate metabolizer (19.4%), rapid metabolizer (9.7%) and poor metabolizer (4.8%) genotypes. Findings from this study provide further insights into the CYP2C19 genetic profile of the Orang Asli as previously unreported variant alleles were detected through the use of massively parallel sequencing technology platform. The systematic and comprehensive analysis of CYP2C19 will allow uncharacterized variants that are present in the Orang Asli to be included in the genotyping panel in the future., Competing Interests: The authors have declared that no competing interests exist.

We report here the complete genome sequence of Salmonella enterica subsp. enterica serovar Typhi B/SF/13/03/195 obtained from a typhoid carrier, who is a food handler in Pasir Mas, Kelantan., (Copyright © 2015 Muhamad Harish et al.)

Rhodotorula species are increasingly being identified as a cause of fungal infection in the central nervous system, especially in patients with compromised immunity. The diagnosis could easily be missed due to low index of suspicion, as cryptococcus meningitis and cerebral toxoplasmosis are more common amongst immunocompromised hosts. To date, there are six cases of Rhodotorula-related meningitis reported, and three are associated with human immunodeficiency virus infection. In this report, a case of a Malaysian male with underlying human immunodeficiency virus infection who developed Rhodotorula mucilaginosa meningitis is presented. High-grade fever and severe headaches were the complaints presented in three previous case reports. India ink and nigrosin stainings were performed in the two previous reports and both revealed positive results. R. mucilaginosa were isolated from the culture of the patient's cerebrospinal fluid in all three previous reports. Predominant lymphocyte infiltration in the cerebrospinal fluid examination was documented in two reports. CD4 counts were above 100/µl in two previously published reports, while another report documented CD4 count as 56/µl. Amphotericin B and itraconazole are identified to be the first line of antifungal used and as the maintenance therapy, respectively. The possibility of relapse cannot be excluded as it was reported in the first report. It was also revealed that the current case has almost similar clinical presentation and therapeutic outcome as compared to the published reports, but some differences in diagnostic details were to be highlighted.