Search

The failure mechanisms and mechanical properties of bollards present significant risks in port and maritime engineering thereby calling for a thorough investigation into these aspects. This study highlights the significance of elements like tensile strength shear stress and service loads while examining the difficulties related to metal bollard failures. This paper presents a case study on A60 steel bollards that combines numerical simulations with experimental testing using Catia and Mathcad software. The results reveal that even as the mechanical houses adjust with A60 steel standards, under accurate ambit and a hundred-ton load, compactness and shear stresses exceed the limit attrition of the bollard. The acceptable strain considerably surpasses the adaptable limit, advertence impending failure. The analysis recommends layout adjustments, presenting a higher array of the annular part of the demonstrated bollard and a safety factor of at least 1. 5 to boost the bollard attrition and forestall hurt under a hundred-ton load. This research contributes advantageous insights into bollard layout, acclamation real- global demanding situations, and promoting safety in maritime infrastructure.

IntroductionThis study examines the effect of educational interventions on strategic learning and self-regulation variables of underrepresented minority students (URMs) who participated in the NIH R25 Research education program.MethodsThe LASSI instrument was administered to 21 URMs who participated in the intervention over 2 years. We collected pre- and post-intervention data before and after the educational intervention.ResultsThere was a significant improvement (p < 0.001) in all strategic learning and self-regulation parameters including attitude, concentration, information processing, motivation, selecting main ideas, self-testing, test strategies, and time management for the pre and post-assessments.ConclusionThe results of this study indicate that self-regulated learning strategies in research education programs are important to help URM’s chances of advancing along scientific and educational pathways.

Sufism has political and religious dimensions. It appeared in Andalusian society as an asceticism and away from the luxury of the world and its pleasures, and developed into a thought that believed in which people influenced the Andalusian society. The research we studied : The first topic : Sufism, its definition, its inception, its layers, and the ideas of a muridiyah, and it contains four demands. The first requirement : the definition of Sufism, and in the second requirement : the emergence of Sufism, and in the third requirement : the layers and conditions of Sufism, and in the fourth requirement: the belief and thought of Sufism. As for the second topic : Sufism and its men in Andalusia in the days of the Almorabiteen and the Almohadeen, and there are two demands, the first requirement: Sufism and its most prominent men in the Almorabiteen era, and in the second requirement: Sufism and its most prominent men in the Almohadeen era. The aim of the study was to know the beginnings and development of Sufi thought in a country whose people influenced the preservation of the origins of the Maliki doctrine, and the scientific method was in accordance with the historical research method and its tools of presentation, analysis and description of events and linking them to a scientific method punctuated by a conclusion in some events

In this study, a mono-functional ZrO2 nanomaterial was treated with sulfur and loaded with two different percentages of platinum metals (i.e., 0.5 and 1 wt%) to generate an acidic bi-functional Pt/SZrO2 nanocatalyst for the purpose of increasing the catalytic activity and selectivity together. This work aims to determine the least amount of the costly platinum metal that can be added to the catalyst to achieve the appropriate balance between the acidic and metallic sites. Both rapid deactivation of the super-acid nanaocatalyst and fast cleavage of the zero-octane n-heptane chain can consequently be prevented throughout the reaction. This can be achieved by accelerating the hydroisomerization reactions at a pressure of 5 bar to reach the highest selectivity towards producing the desired multi-branched compound in fuel. Several characterization techniques, including XRD, SEM, EDX, BET, and FTIR, have been used to evaluate the physical properties of the catalysts. The best reaction product was obtained at 230 °C compared to the other tested temperatures. The conversion, selectivity, and yield of reaction products over the surfaces of the prepared catalysts followed this order: 0.5 wt% Pt/SZrO2 > 1 wt% Pt/SZrO2 > 0.5 wt% Pt/ZrO2 > 1 wt% Pt/ZrO2 > SZrO2 > ZrO2. The highest conversion, selectivity, and yield values were obtained on the surface of the 0.5 wt% Pt/SZrO2 catalyst, which are 69.64, 81.4 and 56.68 wt%, respectively, while the lowest values were obtained on the surface of the parent ZrO2 catalyst, which are 43.9, 61.1 and 26.82, respectively. The kinetic model and apparent activation energies were also implemented for each of the hydroisomerization, hydrogenation/dehydrogenation, and hydrocracking reactions, which track the following order: hydroisomerization < hydrogenation/dehydrogenation < hydrocracking. The lowest apparent activation energy value of 123.39 kJ/mol was found on the surface of the most active and selective 0.5% Pt/SZrO2 nanocatalyst.

We determined the average glandular dose (AGD) from the craniocaudally (CC) and mediolateral oblique (MLO) views of 496 breasts (247 women) at eight clinics in Sudan. The incident air kerma from the X-ray tube output values and the typical patient-specific breast exposure factors were measured. The AGD values were inferred from the measured incident air kerma and breast-specific dose-conversion coefficients. The AGD per CC and MLO projection and per woman ranged from 0.56 to 2.89 mGy (average: 1.36), 0.48 to 2.08 mGy (average: 1.19), and 2.08 to 9.94 mGy (average: 5.10). The proposed national diagnostic reference levels (mGy) for digital mammography are 1.8 and 1.6 mGy for CC and MLO projection, respectively. Establishing the proposed diagnostic reference levels is an essential step in ensuring patient protection from radiation and will help promote dose optimization for X-ray mammography at the national level and beyond. These results provide important baseline data that can be used to formulate national diagnostic reference levels.

The COVId19 pandemic is a newly emerging infectious disease that needs to be understood thoroughly in order to be controlled. This study aimed to study the clinical and laboratory characteristics of the COVID19 patient . Patient and methods: A cross-sectional study was done in Iraq, at Salahadeen general hospital from the period 1st March to the end of May 2020 on patients diagnosed with COVID 19. A total of 75 COVID19 patients enrolled in the study. a full history was taken, a full physical examination was done, computerized tomography, and laboratory tests. Results: The age distribution of the COVID19 patient were commonly aged (30-50 years) 37(49.3%), and those aged

Abstract Background Combined oral contraceptive pills are associated with an established risk for venous thrombosis; however, their risk for arterial thrombosis remains uncertain, especially with the development of low dose new generations of combined oral contraceptive. Arterial thrombosis is less likely to occur with the use of oral contraceptive pills in the absence of cardiovascular risk factors. Case presentation We report a 35-year old female with no cardiovascular risk factors who presented with thrombotic anterior wall myocardial infarction 6 months after using a third generation low dose combined oral contraceptive pills (Marvelon; ethinylestradiol 30 mcg and desogestrel 150 mcg). Conclusion Third generation low dose combined oral contraceptives may lead to myocardial infarction in young women, even in the absence of other cardiovascular risk factors.

Anthropogenic wildlife exploitation threatens biodiversity worldwide. With the emergence of online trading which facilitates the physical movement of wildlife across countries and continents, wildlife conservation is more challenging than ever. One form of wildlife exploitation involves no physical movement of organisms, presenting new challenges. It consists of hunting and fishing “experiments” for monetized online entertainment. Here we analyze >200 online videos of these so-called experiments in the world's largest video platform (YouTube). These videos generated about half a billion views between 2019 and 2020. The number of target species (including threatened animals), videos, and views increased rapidly during this period. The material used in these experiments raises serious ethical questions about animal welfare and the normalization of violence to animals on the Internet. The emergence of this phenomenon highlights the need for online restriction of this type of content to limit the spread of animal cruelty and the damage to global biodiversity. It also sheds light on some conservation gaps in the virtual sphere of the Internet which offers biodiversity-related business models that has the potential to spread globally.

This study aims to introduce the prophet and the messenger in the language and terminology and to indicate some of the qualities that the prophets and messengers (peace and blessings of Allaah be upon them) should have. The study also aims to identify the mental and mental evidence and proofs that indicate the proof of these duties for the apostles and prophets, peace be upon them. The researcher used the analytical method by presenting a set of qualities that should be attributed to the prophets and apostles (peace be upon them), mentioning the evidence and proofs, standing on their details, and pointing out their intent. The study came to the following conclusions: there must be several qualities and perfections in the right of the prophets and messengers (peace and blessings of Allaah be upon them), such as honesty, truthfulness, reporting, virtuousness, and others. It also became clear after studying these duties with their evidence that what was attributed to the prophets and apostles-peace and blessings of Allaah be upon them - of sins, whether great or small, is nothing but pure slander and lies. The study recommended that scholars, especially specialists, should pay attention to the statement of what is necessary, what is impossible, and what is permissible in the case of the prophets and apostles (peace and blessings of Allaah be upon them). And pay attention to the evidence and proofs that prove that these duties are obligatory for the prophets and messengers –peace be upon them-.

Noise remains an important challenge, particularly in informal settings where planning and regulation are relatively weak. This study aims at developing a model to predict noise in a largely informal urban Kano, the second most populated city in Nigeria. Sound level meter (SLM) 200 TL was used to measure noise at locations covering different land use: residential, industrial, commercial, educational, and administrative areas. Data were collected for seven days, and each day measurements were taken for six hours: 8–10 a.m., 12–2 p.m. and 4–6 p.m. Land use, population density, residential division, traffic volume, and land cover were used to generate a noise model using weighted geographic regression. The findings revealed that noise in the area is higher than the permissible limits set by the WHO and Nigeria’s regulatory agency. The model identified population density as the most influencing factor, followed by land cover, traffic volume and distance to the road, then land use. Seventy three percent of the model’s residual are below five, indicating a significant association between noise and the variables used. The R2 ranges between 18% and 26% depending on the time of the day. Noise in the area can be effectively control by paying serious attention to city planning and enforcing traffic regulation measures.

A laboratory study was conducted to determine the effect of irrigation water quality on potassium desorption in some calcareous soils. It was constructed by miscible displacement technique using chlorine and sulfuric water via two different textured soils from Fadhlia and Hamdania locations in Nineveh province / northern Iraq for 240 minute with 10 minutes interval at a rate flow 1 ml.minute-1. Results showed higher values of desorbed potassium rate in sulfuric water which were 3.57, 2.128 c.mole.kg-1, while these rates referred to be much lower than that resulted by using chlorine water 2.25, 1.15 c.mole.kg-1 for both locations respectively. Also high correlation appeared between K+ desorption capacity and flow time (R2 = 0.96 , R2 = 0.79) for both water qualities in Fadhlia location , while these rates were (R2 = 0.98, R2 = 0.95) for Hamdania location respectively. Mathematical description for diffusion equation appeared to be of higher values of K+ desorption capacity rates for sulfuric water which were 0.26, 0.13 c.mole.kg-1.min.-½ for Fadhlia and Hamdania locations respectively, while these rates for chlorine water were 0.146, 0.048 c.mole.kg-1.min.-½ for both locations respectively.

In this study, a solution casting method was used to prepare solid polymer electrolytes (SPEs) based on a polymer blend comprising polyvinyl alcohol (PVA), cellulose acetate (CA), and potassium carbonate (K2CO3) as a conducting salt, and zinc oxide nanoparticles (ZnO-NPs) as a nanofiller. The prepared electrolytes were physicochemically and electrochemically characterized, and their semi-crystalline nature was established using XRD and FESEM. The addition of ZnO to the polymer–salt combination resulted in a substantial increase in ionic conductivity, which was investigated using impedance analysis. The size of the semicircles in the Cole–Cole plots shrank as the amount of nanofiller increased, showing a decrease in bulk resistance that might be ascribed to an increase in ions due to the strong action of the ZnO-NPs. The sample with 10 wt % ZnO-NPs was found to produce the highest ionic conductivity, potential window, and lowest activation energy (Ea) of 3.70 × 10–3 Scm–1, 3.24 V, and 6.08 × 10–4 eV, respectively. The temperature–frequency dependence of conductivity was found to approximately follow the Arrhenius model, which established that the electrolytes in this study are thermally activated. Hence, it can be concluded that, based on the improved conductivity observed, SPEs based on a PVA-CA-K2CO3/ZnO-NPs composite could be applicable in all-solid-state energy storage devices.

Successful synthesis of ZnO-chitosan nanocomposites was conducted for the removal of methylene blue from an aqueous medium. Remarkable performance of the nanocomposites was demonstrated for the effective uptake of the dye, thereby achieving 83.77, 93.78 and 97.93 mg g−1 for the chitosan, 5 wt.% ZnO-Chitosan and 10 wt.% ZnO-Chitosan, respectively. The corresponding adsorption efficiency was 88.77, 93.78 and 97.95 for the chitosan, 5 wt.% ZnO-Chitosan and 10 wt.% ZnO-Chitosan, respectively. Upon regeneration, good reusability of the nanocomposites was manifested for the continuous removal of the dye up to six consecutive cycles. The adsorption process was kinetically described by a pseudo-first order model, while the isotherms were best fitted by the Langmuir model.

This paper presents a new semi-blind image watermarking system for medical applications. The new scheme utilizes Singular Value Decomposition (SVD) and Discrete Wavelet Transform (DWT) to embed a textual data into original medical images. In particular, text characters are encoded by a Quadrature Amplitude Modulation (QAM-16). In order to increase the security of the system and protect then the watermark from several attacks, the embedded data is submitted to Arnold Transform before inserting it into the host medical image. To evaluate the performances of the scheme, several medical images have been used in the experiments. Simulation results show that the proposed watermarking system ensures good imperceptibility and high robustness against several attacks.

The commercial distribution contract, which might be local or international, is regarded one of the most updated methods in trading, selling, and marketing products, commodities, and services for consumers. As this type of contract urgently needs regulating, the study helps in illustrating the contract’s aspects, principles, effects, termination and obligations of both producer and distributor, in addition to, liquidation of contractual bond. Through this type of contract is important, yet there is no legal statute to regulate it. Due to this absence, a lot of problems emerge when it is put into practice. Therefore, general laws are applied sometimes, or the law of agents or commercial brokers in others. Consequently, it has become urgent to enact a legislation to regulate rules and provisions of the contract. The researchers came up to certain findings recommending that it is necessary to enact a legislation that regulates terms of this contract with regard to identity, definitions, principles, parties, obligations, party rights, laps of time with consequential effects, liquidating contractual bond pertaining commodities, trade mark, spare parts, customers with whom the distributor used to deal, in addition to other relevant outcomes of the contract.

A new series of N'-substituted benzylidene-2-(4-oxo-2-phenyl-1,4-dihydroquinazolin-3(2H)-yl)acetohydrazide (5a–5h) has been synthesized, characterized by FT-IR, NMR spectroscopy and mass spectrometry and tested against human monoamine oxidase (MAO) A and B. Only (4-hydroxy-3-methoxybenzylidene) substituted compounds gave submicromolar inhibition of MAO-A and MAO-B. Changing the phenyl substituent to methyl on the unsaturated quinazoline ring (12a–12d) decreased inhibition, but a less flexible linker (14a–14d) resulted in selective micromolar inhibition of hMAO-B providing insight for ongoing design.

The conjugated polymer poly {[2-[2′,5′-bis(2″-ethylhexyloxy)phenyl]-1,4-phenylenevinylene]-co-[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene]} (B-co-MP) has been proven to be an excellent laser medium with a high photochemical stability. Moreover, the impact of γ-irradiation on its optical and chemical properties has been investigated. Herein, the spectral and amplified spontaneous emission (ASE) characteristics of B-co-MP at various concentrations under γ-irradiation doses are studied. Various concentrations of B-co-MP in tetrahydrofuran (THF) were prepared. The samples were irradiated with various γ-doses from 5 to 20 kGy using a Co-60 source at room temperature. The absorption, fluorescence, and ASE spectra were dramatically blue-shifted after the γ-irradiation. This indicates that the increment in the γ-irradiation dose led to a widening in the energy gap and reduction in the number of carbon atoms (N). The change in the spectral profiles could be attributed to chain conformational alterations and/or chain scission induced by the γ-irradiation. We anticipate this study to boost our understanding of optical and structural profiles of B-co-MP under various conditions, including γ-irradiation and the potential utility of this copolymer in a variety of applications.

Mass production of low-cost, generic direct-acting antivirals (DAAs) will be required to achieve targets of eliminating hepatitis C (HCV) by 2030. The pharmaceutical companies Gilead and Bristol-Myers Squibb have granted voluntary licences (VLs) to generic companies to mass produce the DAAs sofosbuvir and daclatasvir at low cost. However, generic manufacturers need to demonstrate bioequivalent pharmacokinetics for their DAAs, compared to the originator versions, to fulfil World Health Organization standards for prequalification. The aim of this study was to determine whether generic forms of sofosbuvir and daclatasvir had bioequivalent pharmacokinetics to the originator versions.Generic companies were contacted for results of bioequivalence studies with sofosbuvir and daclatasvir, two of the most widely used DAAs in the developing world. Data on maximum concentration (Cmax) and area under the curve (AUC) were compiled from five generic companies. Pre-specified limits for the 90% confidence intervals were 80–125% of the originator pharmacokinetic concentrations for AUC, and 69–145% for Cmax.The pharmacokinetics of generic sofosbuvir and daclatasvir were shown to be bioequivalent to the originator versions for all five generic companies. This is a crucial step towards securing prequalification of the manufacture of these drugs from these companies. WHO prequalification of bioequivalent generic DAAs could then permit their export to eligible countries for mass-treatment programmes. Mass-treatment with low-cost generic HCV DAAs is the most promising method to achieve the ambitious World Health Organization targets for HCV elimination by 2030.

A new design of the MOSFET dosimeter is being developed in a different study to measure the dose delivered to the tissue layers. Development of zinc oxide-Lead (ZnO-Pb) of different thicknesses fabricated by chemical bath deposition were investigated to study their sensitivity following irradiation using a low absorbed dose that can be used in diagnostic and interventional radiology (9, 36.5, and 70 mGy) and high absorbed dose (1, 5, and 10 Gy) of X-ray. The morphology and structure of the as-prepared films were analysed using FESEM and XRD measurements. The device relies on sensing the changes in the local electric field arising from radiation interactions in the absorber, coupled with the semiconductor materials used in this work—ZnO-Pb as the EGFET. Then the sensitivity of all devices was examined. Generally, thin-film devices showed less sensitivity to X-ray than the disk type. The sensitivity of the thin film dropped from 6.66 mV/to 1.42 mV/Gy, while the sensitivity of the ZnO-Pb disk type was 23.3 mV/Gy, which then dropped to 6.30 6.42 mV/Gy. Furthermore, the disk type ZnO-Pb was exposed to a high absorbed dose and obtained a sensitivity value of 0.08 mV/Gy, while the ZnO-Pb thin film obtained 0.01 mV/Gy. This can be related to the influence of thickness on the sensitivity of the dosimeter. However, the device’s performance characteristics, like sensitivity to radiation exposure and operating dose area, were discovered to be strongly dependent on the materials employed, effective atomic number, and thickness of the materials. Based on the results shown above, these devices might be considered a low-cost candidate for real-time -radiation dosimetry at room temperature. Furthermore, the thickest sample of 1 mm showed better sensitivity to radiation, compared to the thinner samples.

Abstract Understanding how culture may influence biodiversity is fundamental to ensure effective conservation, especially when the practice is local but the implications are global. Despite that, little effort has been devoted to documenting cases of culturally-related biodiversity loss. Here, we investigate the cultural domestication of the European goldfinch (Carduelis carduelis) in western Maghreb (Morocco, Algeria and Tunisia) and the effects of long-term poaching of wild populations (1990–2016) on range distribution, socio-economic value, international trading and potential collateral damage on Afro-Palearctic migratory birds. On average, we found that the European goldfinch lost 56.7% of its distribution range in the region which led to the increase of its economic value and establishment of international trading network in western Maghreb. One goldfinch is currently worth nearly a third of the average monthly income in the region. There has been a major change in poaching method around 2010, where poachers started to use mist nets to capture the species. Nearly a third of the 16 bird species captured as by-catch of the European goldfinch poaching are migratory, of which one became regularly sold as cage-bird. These results suggest that Afro-Palearctic migratory birds could be under serious by-catch threat.

Computed tomography (CT) is a key imaging technique in diagnostic radiology, providing highly sensitive and specific information. While its use has increased dramatically in recent years, the quantity and associated risks of radiation from CT scans present major challenges, particularly in paediatrics. The fundamental principles of radiation protection require that radiation quantities be as low as reasonably achievable and CT use must be justified, particularly for paediatric patients. CT radiation knowledge is a key factor in optimising and minimising radiation risk. The objective of this study was to analyse knowledge level, expertise, and competency regarding CT radiation dose and its hazards in paediatrics among radiologists in Saudi Arabian hospitals. A self-reported, multiple-choice questionnaire assessed the attitudes and opinions of radiologists involved in imaging studies using ionising radiation. Among the total respondents, 65% ± 13.5% had a good comprehension of the dangers of carcinogenicity to the patient resulting from CT scans, with 80% presuming that cancer risks were elevated. However, only 48.5%, 56.5%, and 65% of the respondents were aware of specific radiation risks in head, chest, and abdominal paediatric examinations, respectively. Regular, frequent, and specific training courses are suggested to improve the fundamental knowledge of CT radiation among radiologists and other physicians.

Diabetes mellitus represents a major burden in Saudi Arabia where seven million (20% of population) are living with diabetes. This article reviews the literature on usage of traditional and complementary medicine (T&CM) therapies among Saudi diabetic patients, focusing in particular on identifying the prevalence as well as discussing their safety and efficacy. Three databases (PubMed, Cochrane, and ScienceDirect) were searched prior to December 10, 2017, for articles published in peer-reviewed journals that reported primary data on the use of traditional and complementary medicine therapies among diabetic patients in Saudi Arabia. Six studies were selected according to the inclusion/exclusion criteria. In conclusion, the prevalence of use of T&CM therapies among diabetics in Saudi Arabia was 32.18%. This review identified that the most used T&CM therapy among diabetics was herbal treatment. The most used herbs were fenugreek, black seeds, neem, myrrh, helteet, harmel, and aloes. There is insufficient or little evidence to support the efficacy of the most identified herbs and therapies. This review is raising the safety concerns about the used herbs and complementary therapies which were commonly used without any medical consultation.

Introduction: This study aims to evaluate the effects of different curing units and modes on the degree of conversion (DC) and microhardness (MH) of two different resin composites [ESTELITE ∑ QUICK (EQ), and Z350 XT (Z3)]. Materials and Methods: One hundred (100) discs of each tested material were made and divided into two subgroups (n = 50) according to the discs′ dimensions: 5 mm diameter × 2 mm thickness, and 2 mm diameter × 2 mm thickness. Each subgroup was further subdivided into the following five classes (n = 10): I) cured with halogen light curing-unit; II) cured with light-emitting diode (LED) unit; III) cured with argon laser; IV) cured with halogen light-curing unit for 5 s, 10 s rest followed by 20 s curing; and V) cured with halogen light-curing unit for 10 s, then 10 s rest, followed by 10 s curing. The first subgroup was tested for MH using the Vickers Microhardness tester and the second subgroup was tested for DC using Fourier transform infrared spectroscopy (FTIR). Data were statistically analyzed using two-way analysis of variance (ANOVA) and Tukey′s post hoc test P < 0.05. Results: Specimens in class IV showed the highest mean DC and MH, followed by class III, then class II. Class I showed significantly lower mean values for both DC and MH. On the other hand, Z3 showed statistically significantly higher mean DC and MH than EQ. Conclusion: Although the two tested composites did not perform similarly under the test conditions, curing with halogen unit for 5 s, then 10 s rest, followed by 10 s curing improved the DC and the MH of both the tested materials.

A preliminary study was carried out on the insect fauna of Al-Baha Province, south-western part of Saudi Arabia. A total number of 582 species and subspecies (few identified only to the genus level) belonging to 129 families and representing 17 orders were recorded. Two of these species are described as new, namely: Monomorium sarawatensis Sharaf & Aldawood sp. n. [Formicidae, Hymenoptera] and Anthrax alruqibi El-Hawagry sp. n. [Bombyliidae, Diptera]. Another eight species are recorded for the first time in Saudi Arabia, namely: Xiphoceriana arabica (Uvarov, 1922) [Pamphagidae, Orthoptera], Pyrgomorpha conica (Olivier, 1791) [Pyrgomorphidae, Orthoptera], Catopsilia florella (Fabricius, 1775) [Pieridae, Lepidoptera], Anthrax chionanthrax (Bezzi, 1926) [Bombyliidae, Diptera], Spogostylum near tripunctatum Pallas in Wiedemann, 1818 [Bombyliidae, Diptera], Cononedys dichromatopa (Bezzi, 1925) [Bombyliidae, Diptera], Mydas sp. [Mydidae, Diptera], and Hippobosca equina Linnaeus, 1758 [Hippoboscidae, Diptera]. Al-Baha Province is divided by huge and steep Rocky Mountains into two main sectors, a lowland coastal plain at the west, known as “Tihama”, and a mountainous area with an elevation of 1500 to 2450 m above sea level at the east, known as “Al-Sarat or Al-Sarah” which form a part of Al-Sarawat Mountains range. Insect species richness in the two sectors (Tihama and Al-Sarah) was compared, and the results showed that each of the two sectors of Al-Baha Province has a unique insect community. The study generally concluded that the insect faunal composition in Al-Baha Province has an Afrotropical flavor, with the Afrotropical elements predominant, and a closer affiliation to the Afrotropical region than to the Palearctic region or the Eremic zone. Consequently, we tend to agree with those biogeographers who consider that parts of the Arabian Peninsula, including Al-Baha Province, should be included in the Afrotropical region rather than in the Palaearctic region or the Eremic zone.

In spite of there being several case reports, coronary stent fracture is not a well-recognized entity and incidence rates are likely to be underestimated. In this article, we review different aspects of stent fracture, including incidence, classification, predictors, outcome, diagnosis, and management.

Field oriented control (FOC) method of an induction motor (IM), allows high performance speed and torque response to be achieved from an induction motor. The present work selects the direct field orientation control induction motor (DFOCIM) as an effective method for eliminating the coupling effect between torque and flux. In the present work, two schemes of estimators have been used, standard kalman filter (SKF) and Extended kalman filter (EKF) for estimating stator current, rotor flux and rotor speed. The performance comparison is based on evaluation of estimation error of both estimators. The performances of suggested estimators are assessed in terms of tracking performance and noise rejection capability.

Direct field-orientation Control (DFOC) of induction motor drives without mechanical speed sensors at the motor shaft has the attractions of low cost and high reliability. To replace the sensor, information on the rotor speed and position are extracted from measured stator currents and from voltages at motor terminals. In this paper presents direct field-orientation control (DFOC) with two type of kalman filter (complete order and reduced order extended kalman filter) to estimate flux, speed, torque and position. Simulated results show how good performance for reduced order extended kalman filter over that of complete order extended kalman filter in tracking performance and reduced time of state estimation.