Search

Abstract Plants are subjected to various biotic and abiotic stresses that significantly impact their growth and productivity. To achieve balanced crop growth and yield, including for leafy vegetables, the continuous application of micronutrient is crucial. This study investigates the effects of different concentrations of copper sulphate (0, 75, 125, and 175 ppm) on the morphological and biochemical features of Spinacia oleracea and Avena sativa. Morphological parameters such as plant height, leaf area, root length, and fresh and dry weights were optimized at a concentration of 75 ppm copper sulfate. At this concentration, chlorophyll a & b levels increased significantly in Spinacia oleracea (462.9 and 249.8 𝜇𝑔/𝑔), and Avena sativa (404.7 and 437.63𝜇𝑔/𝑔). However, carotenoid content and sugar levels in Spinacia oleracea were negatively affected, while sugar content in Avena sativa increased at 125 ppm (941.6 µg/ml). Protein content increased in Spinacia oleracea (75 ppm, 180.3 µg/ml) but decreased in Avena sativa. Phenol content peaked in both plants at 75 ppm (362.2 and 244.5 µg/ml). Higher concentrations (175 ppm) of copper sulfate reduced plant productivity and health. Plants exposed to control and optimal concentrations (75 and 125 ppm) of copper sulpate exhibited the best health and growth compared to those subjected to higher concentrations. Maximum plant height, leaf area, root length, fresh and dry weights were observed at lower concentrations (75 and 125 ppm) of copper sulfate, while higher concentrations caused toxicity. Optimal copper sulfate levels enhanced chlorophyll a, chlorophyll b, total chlorophyll, protein, and phenol contents but inhibited sugar and carotenoid contents in both Spinacia oleracea and Avena sativa. Overall, increased copper sulfate treatment adversely affected the growth parameters and biochemical profiles of these plants.

Abstract Wheat (Triticum aestivum L.) is a staple food crop that plays a crucial role in global food security. A suitable planting pattern and optimum nitrogen (N) split management are efficient practices for improving wheat production. Therefore, an experiment was performed to explore the effect of N split management and sowing patterns on wheat at the Agronomy Research Farm, The University of Agriculture Peshawar, during rabi season 2020-21 and 2021-22. The treatments consisted of different nitrogen rates of 0, 80, 120, and 160 kg ha− 1 and planting patterns of W, M, broadcast and line sowing. The pooled analysis of both cropping seasons showed that application of 120 kg N ha− 1 increased spikelets spike− 1, grains spike− 1, 1000 grains weight, grain yield, grain N content, evapotranspiration and water use efficiency by 21.9, 16.7, 21.8, 70, 13, 19.9 and 40% as compared to control, respectively. In addition, W and M were observed the best management practices among all planting patterns. The M planting pattern enhanced chlorophyll a, b, carotenoids and evapotranspiration while W plating pattern improved yield components and yield of wheat as compared to broadcast planting patterns. The principal component analysis biplot showed a close association of M and W planting patterns with 120 kg N ha− 1 in most of the studied traits. Hence, it is concluded that split application of 120 kg N ha− 1 in W and M sowing patterns enhanced growth, biochemical traits and water use efficiency, reducing N fertilization from 160 to 120 kg ha− 1 while increasing grain yield of wheat. Hence, it is recommended that application of 120 kg N ha⁻¹ in combination with W and M planting patterns offer a sustainable approach to enhancing wheat production in the alkaline soil conditions of the Peshawar valley.

Abstract We present a new selective Metamaterial Perfect Absorber (MPA) consisting of zinc oxide embedded silver (Ag@ZnO), designed for applications in infrared stealth technology. The numerical simulation included a wide frequency range from 1 to 1000 THz and shows that the design MPA structure presented two absorption peaks at the desired wavelengths of 1.7 µm and 6.5 µm. The absorptivity of both peaks reached approximately 93.1% and 93.5%. The first peak at 1.7 µm decreases the scattering of IR laser beams from the surface of the MPA structure and also lowers the infrared tracks that could direct laser-guided devices to its specific target. On the other hand, the second peak reduces the surface heat wave. The suggested MPA (Ag@ZnO) structure is activated by a plane wave using a full wave vector and a broad frequency domain solution. In the framework of computer simulation technology (CST) Microwave Studio, uses both Finite-Difference-Time-Domain (FDTD) and Finite-Element-Method (FEM) techniques to predict the optical behavior of the proposed MPA structure. Both peaks achieved a high value of absorptivity due to the simultaneous excitation of the electric and magnetic dipole at resonance wavelength.

Abstract Colorectal cancer (CRC) is among the most prevalent cancers with a high mortality rate. Both genetic and environmental factors contribute to CRC development. This study aimed to assess the association of single nucleotide polymorphisms (SNPs) in the fatty acid binding protein-2 (rs1799883), Cytochrome P450 2E1 (rs3813865), TP53 (rs1042522), and Murine double minute 2 (rs1042522) genes with CRC. A cross-sectional case–control study was conducted at the Institute of Molecular Biology and Biotechnology from May 2020 to March 2021, involving CRC patients (N = 100) and controls (N = 100) recruited from the Multan district in Pakistan. Polymerase chain reaction-restriction fragment length polymorphism (PCR–RFLP) and tetra-primer amplification refractory mutation system-polymerase chain reaction (ARMS-PCR) were employed to investigate the studied SNPs. The association of SNPs in all genes with CRC was examined either individually or in various combinations. Genotypes at three SNPs, rs1799883 in FABP2, rs3813865 in CYP2E1, and rs1042522 in TP53, were found to be associated with the development of CRC, while rs1042522 in MDM2 was not. Patients who were married, smoked, lacked exercise habits or had a family history of CRC were at a greater risk of acquiring the disease. FABP2 gene rs1799883, CYP2E1 gene rs3813865, and TP53 gene rs1042522 polymorphisms are significant in the development of CRC in Pakistani participants.

Abstract This study investigates the differential responses of two maize genotypes, SC180 and SC168, to salt stress, aiming to elucidate the mechanisms underlying salinity tolerance and identify traits associated with improved stress resilience. Salinity stress, imposed by 150 mM NaCl, adversely affected various growth parameters in both genotypes. SC180 exhibited a more pronounced reduction in shoot length (13.6%) and root length (13.6%) compared to SC168, which showed minimal reductions (3.0% and 2.3%, respectively). Additionally, dry weight losses in SC180's leaves, stems, and roots were significantly greater than those in SC168. Under salinity stress, both genotypes accumulated Na+ in all organs, with SC168 showing higher Na + concentrations. However, K+ levels decreased more significantly in SC180's leaves than in SC168's. The study also assessed physiological responses, noting that SC180 experienced a substantial reduction in relative water content (RWC) in leaves (22.7%), while SC168's RWC remained relatively stable (5.15%). Proline accumulation, a marker for osmotic adjustment, increased 2.3-fold in SC168 compared onefold in SC180. Oxidative stress indicators, such as electrolyte leakage and hydrogen peroxide levels, were elevated in both genotypes under salt stress, with SC180 showing higher increases (48.5% and 48.7%, respectively) than SC168 (35.25% and 22.0%). Moreover, antioxidant enzymes (APX, CAT, POD, SOD, GR) activities were significantly enhanced in SC168 under salinity stress, whereas SC180 showed no significant changes in these activities. Stress indices, used to quantify and compare salinity tolerance, consistently ranked SC168 as more tolerant (average rank = 1.08) compared to SC180 (average rank = 1.92). Correlation analyses further confirmed that SC168's superior tolerance was associated with better Na + regulation, maintenance of K+ levels, and a robust antioxidant defense system. In conclusion, SC168 demonstrated greater resilience to salinity stress, attributed to its efficient ion regulation, stable water status, enhanced osmotic adjustment, and strong antioxidant response. These findings provide valuable insights for breeding and developing salinity-tolerant maize varieties.

Abstract Developing special textiles (for patients in hospitals for example) properties, special antimicrobial and anticancer, was the main objective of the current work. The developed textiles were produced after dyeing by the novel formula of natural (non-environmental toxic) pigments (melanin amended by microbial-AgNPs). Streptomyces torulosus isolate OSh10 with accession number KX753680.1 was selected as a superior producer for brown natural pigment. By optimization processes, some different pigment colors were observed after growing the tested strain on the 3 media. Dextrose and malt extract enhanced the bacteria to produce a reddish-black color. However, glycerol as the main carbon source and NaNO3 and asparagine as a nitrogen source were noted as the best for the production of brown pigment. In another case, starch as a polysaccharide was the best carbon for the production of deep green pigment. Peptone and NaNO3 are the best nitrogen sources for the production of deep green pigment. Microbial-AgNPs were produced by Fusarium oxysporum with a size of 7–21 nm, and the shape was spherical. These nanoparticles were used to produce pigments-nanocomposite to improve their promising properties. The antimicrobial of nanoparticles and textiles dyeing by nanocomposites was recorded against multidrug-resistant pathogens. The new nanocomposite improved pigments' dyeing action and textile properties. The produced textiles had anticancer activity against skin cancer cells with non-cytotoxicity detectable action against normal skin cells. The obtained results indicate to application of these textiles in hospital patients’ clothes.

Abstract Background Nitrogen (N) availability is crucial in regulating plants’ abiotic stress resistance, particularly at the seedling stage. Nevertheless, plant responses to N under salinity conditions may vary depending on the soil’s NH4 + to NO3 − ratio. Methods In this study, we investigated the effects of different NH4 +:NO3 − ratios (100/0, 0/100, 25/75, 50/50, and 75/25) on the growth and physio-biochemical responses of soybean seedlings grown under controlled and saline stress conditions (0-, 50-, and 100-mM L− 1 NaCl and Na2SO4, at a 1:1 molar ratio). Results We observed that shoot length, root length, and leaf-stem-root dry weight decreased significantly with increased saline stress levels compared to control. Moreover, there was a significant accumulation of Na+, Cl−, hydrogen peroxide (H2O2), and malondialdehyde (MDA) but impaired ascorbate-glutathione pools (AsA-GSH). They also displayed lower photosynthetic pigments (chlorophyll-a and chlorophyll-b), K+ ion, K+/Na+ ratio, and weakened O2 •−-H2O2-scavenging enzymes such as superoxide dismutase, catalase, peroxidase, monodehydroascorbate reductase, glutathione reductase under both saline stress levels, while reduced ascorbate peroxidase, and dehydroascorbate reductase under 100-mM stress, demonstrating their sensitivity to a saline environment. Moreover, the concentrations of proline, glycine betaine, total phenolic, flavonoids, and abscisic acid increased under both stresses compared to the control. They also exhibited lower indole acetic acid, gibberellic acid, cytokinins, and zeatine riboside, which may account for their reduced biomass. However, NH4 +:NO3 − ratios caused a differential response to alleviate saline stress toxicity. Soybean seedlings supplemented with optimal ratios of NH4 +:NO3 − (T3 = 25:75 and T = 4 50:50) displayed lower Na+ and Cl− and ABA but improved K+ and K+/Na+, pigments, growth hormones, and biomass compared to higher NH4 +:NO3 − ratios. They also exhibited higher O2 •−-H2O2-scavenging enzymes and optimized H2O2, MDA, and AsA-GSH pools status in favor of the higher biomass of seedlings. Conclusions In summary, the NH4 + and NO3 − ratios followed the order of 50:50 > 25:75 > 0:100 > 75:25 > 100:0 for regulating the morpho-physio-biochemical responses in seedlings under SS conditions. Accordingly, we suggest that applying optimal ratios of NH4 + and NO3 − (25/75 and 50:50) can improve the resistance of soybean seedlings grown in saline conditions.

Abstract Background Three Amino acid Loop Extension (TALE) belongs to the homeobox group of genes that are important constituents of plant systems. The TALE gene family is instrumental not only in growth and development but also plays an essential role in regulating plant response to environmental adversaries. Results In the present study, we isolated 21 CsTALE genes from the cucumber (Cucumis sativus L.) genome database. Bioinformatics tools were put in place to understand the structural and functional components of the CsTALE gene family. The evolutionary analysis dissected them into seven subclades (KNOX-I, KNOX-II, and BELL-I to BELL-V). The cis-acting elements in the promoter region of CsTALE genes disclosed that they are key regulators of hormonal and stress-related processes. Additionally, the STRING database advocated the concerting role of CsTALE proteins with other key transcription factors potent in plant developmental biology. The CsmiR319 and CsmiR167a-3p targeting the CsTALE15 and CsTALE16, respectively, further assert the importance of the CsTALE gene family posttranscriptional-related processes. Tissue-specific gene expression unfolded the fundamental involvement of CsTALE genes as they were expressed throughout the developmental stages. Under waterlogging stress, the CsTALE17 expressed significantly higher values in WL, WL-NAA, and WL-ETH but not in WL-MeJA-treated samples. Conclusions The present study reveals the evolution and functions of the CsTALE gene family in cucumber. Our work will provide a platform that will help future researchers address the issue of waterlogging stress in the Yangtze River Delta.

Abstract Background Lentil is a significant legume that are consumed as a staple food and have a significant economic impact around the world. The purpose of the present research on lentil was to assess the hydrothermal time model’s capacity to explain the dynamics of Lens culinaris L. var. Markaz-09 seed germination, as well as to ascertain the germination responses at various sub-optimal temperatures (T) and water potentials (Ψ). In order to study lentil seed germination (SG) behavior at variable water potentials (Ψs) and temperatures (Ts). A lab experiment employing the hydrothermal time model was created. Seeds were germinated at six distinct temperatures: 15 0С, 20 0С, 25 0С, 30 0С, 35 0С, and 40 0С, with five Ψs of 0, -0.3, -0.6, -0.9, and − 1.2 MPa in a PEG-6000 (Polyethylene glycol 6000) solution. Results The results indicated that the agronomic parameters like Germination index (GI), Germination energy (GE), Timson germination index (TGI), were maximum in 25 0C at (-0.9 MPa) and lowest at 40 0C in 0 MPa. On other hand, mean germination time (MGT) value was highest at 15 0C in -1.2 MPa and minimum at 40 0C in (-0.6 MPa) while Mean germination rate (MGR) was maximum at 40 0C in (0 MPa) and minimum at 15 0C in (-0.6 MPa). Conclusions The HTT model eventually defined the germination response of Lens culinaris L. var. Markaz-09 (Lentil) for all Ts and Ψs, allowing it to be employed as a predictive tool in Lens culinaris L. var. Markaz-09 (Lentil) seed germination simulation models.

Abstract Background Optimum planting date and appropriate fertilizer module are essential facets of chrysanthemum cultivation, to enhance quality yield, and improve soil health. A field-based study was undertaken over multiple growing seasons in 2022 and 2023, where six different planting dates, viz., P1:June 15, P2:June 30, P3:July 15, P4:July 30, P5:August 15 and P6:August 30 and two fertilizer modules, FM1:Jeevamrit @ 30 ml plant−1 and FM2:NPK @ 30 g m−2 were systematically examined using a Randomized Block Design (factorial), replicated thrice. Results P6 planting resulted in early bud formation (44.03 days) and harvesting stage (90.78 days). Maximum plant height (79.44 cm), plant spread (34.04 cm), cut stem length (68.40 cm), flower diameter (7.83 cm), stem strength (19.38˚), vase life (14.90 days), flowering duration (24.08 days), available soil N (314 kg ha−1), available P (37 kg ha−1), available K (347 kg ha−1), bacterial count (124.87 × 107 cfu g−1 soil), actinomycetes count (60.72 × 102 cfu g−1 soil), fungal count (30.95 × 102 cfu g−1 soil), microbial biomass (48.79 µg g−1 soil), dehydrogenase enzyme (3.64 mg TPF h−1 g−1 soil) and phosphatase enzyme (23.79 mol PNP h−1 g−1 soil) was recorded in P1 planting. Among the fertilization module, minimum days to bud formation (74.94 days) and days to reach the harvesting stage (120.95 days) were recorded with the application of NPK @30 g m−2. However, maximum plant height (60.62 cm), plant spread (23.10 cm), number of cut stems m−2 (43.88), cut stem length (51.34 cm), flower diameter (6.92 cm), stem strength (21.24˚), flowering duration (21.75 days), available soil N (317 kg ha−1), available P (37 kg ha−1) and available K (349 kg ha−1) were also recorded with the application of NPK @300 kg ha−1. Maximum vase life (13.87 days), OC (1.13%), bacterial count (131.65 × 107 cfu g−1 soil), actinomycetes count (60.89 × 102 cfu g−1 soil), fungal count (31.11 × 102 cfu g−1 soil), microbial biomass (51.27 µg g−1 soil), dehydrogenase enzyme (3.77 mg TPF h−1 g−1 soil) and phosphatase enzyme (21.72 mol PNP h−1 g−1 soil) were observed with the application of Jeevamrit @ 30 ml plant−1. Conclusion Early planting (P1) and inorganic fertilization (NPK @ 30 g m−2) resulted in improved yield and soil macronutrient content. The soil microbial population and enzymatic activity were improved with the jeevamrit application. This approach highlights the potential for improved yield and soil health in chrysanthemum cultivation, promoting a more eco-friendly and economically viable agricultural model.

Desert plants possess untapped potential for medicinal applications due to their rich phytochemical profiles. However, they need to be more explored. Thus, this study integrates advanced analytical, biochemical, and molecular techniques to investigate the phytochemical composition and biological activities (antimicrobial and antioxidant) of four desert plants (Pergularia tomentosa, Zygophyllum coccineum, Pulicaria undulata, and Ochradenus baccatus), collected from Wadi Sannor, Beni-Suef Governorate, Egypt, in March 2021. The volatile chemicals in the 70 % ethanol extracts of the selected plants were also analyzed using GC-MS. The extract exhibited strong antioxidant properties, as demonstrated by its FRAP (Ferric reducing ability of plasma) values, anti-lipid peroxidation, superoxide anion scavenging activity, and DPPH scavenging activity. Additionally, plants extracts showed high antimicrobial activities against seven pathogens, including three Gram-negative bacteria (Pseudomonas aeruginosa, Salmonella typhimurium, Escherichia coli) and four Gram-positive bacteria (Staphylococcus saprophyticus, Staphylococcus epidermidis, Enterococcus faecalis, Streptococcus salivarius). Lastly, molecular docking was conducted for cis-vaccenic acid, (E)-9-octadecenoic acid, the cyclohepta[b]furan-2-one scaffold, and URS-20(30)-en-3-ol against both the thymidylate kinase enzyme and the active sites of E. coli DNA gyrase. The results from the molecular docking studies showed a strong correlation with the biological data. Moreover, these compounds exhibited good, proposed absorption, distribution, metabolism, and excretion–toxicity (ADMET) profiles. Our study highlights the potential of P. tomentosa, Z. coccineum, P. undulata, and O. baccatus for future medical applications and the development of new pharmaceuticals derived from desert flora.

The objective of the study is to determine the electricity use, and tourism industry environmental impacts, and increase in CO2 emissions in Pakistan. What are the linkages of foreign direct investment, intercountryal trade, gross domestict product, and CO2 emissions. The study has applied the Autoregressive distributed lag (ARDL) method to analysis the data set from 1985 to 2023. The robustness test is applied using Dynamic Ordinary Least Square (DOLS), and Fully modified ordinary least squares (FMOLS). The results reveal that the increase in the electricity use, and tourism industry has significant negative impacts on CO2 emissions in both short- and long-run. The increase in intercountry trade effects the Domestic Product growth (GDP) growth and causes to increase in use of fossil fuels, which are the major source of CO2 emissions. The increase in foreign direct investment (FDI) increase the GDP growth, and FDI also increase the CO2 emissions in Pakistan. The results suggests that the incresae in the renewal energy consumption for the electricity production and transportation can help to decrease the CO2 emissions in Pakistan.

Abstract Background The rate of germination and other physiological characteristics of seeds that are germinating are impacted by deep sowing. Based on the results of earlier studies, conclusions were drawn that deep sowing altered the physio-biochemical and agronomic characteristics of wheat (Triticum aestivum L.). Results In this study, seeds of wheat were sown at 2 (control) and 6 cm depth and the impact of exogenously applied salicylic acid and tocopherol (Vitamin-E) on its physio-biochemical and agronomic features was assessed. As a result, seeds grown at 2 cm depth witnessed an increase in mean germination time, germination percentage, germination rate index, germination energy, and seed vigor index. In contrast, 6 cm deep sowing resulted in negatively affecting all the aforementioned agronomic characteristics. In addition, deep planting led to a rise in MDA, glutathione reductase, and antioxidants enzymes including APX, POD, and SOD concentration. Moreover, the concentration of chlorophyll a, b, carotenoids, proline, protein, sugar, hydrogen peroxide, and agronomic attributes was boosted significantly with exogenously applied salicylic acid and tocopherol under deep sowing stress. Conclusions The results of the study showed that the depth of seed sowing has an impact on agronomic and physio-biochemical characteristics and that the negative effects of deep sowing stress can be reduced by applying salicylic acid and tocopherol to the leaves.

Abstract Large amount of wastes are burnt or left to decompose on site or at landfills where they cause air pollution and nutrient leaching to groundwater. Waste management strategies that return these food wastes to agricultural soils recover the carbon and nutrients that would otherwise have been lost, enrich soils and improve crop productivity. The incorporation of liming materials can neutralize the protons released, hence reducing soil acidity and its adverse impacts to the soil environment, food security, and human health. Biochar derived from organic residues is becoming a source of carbon input to soil and provides multifunctional values. Biochar can be alkaline in nature, with the level of alkalinity dependent upon the feedstock and processing conditions. This study conducted a characterization of biochar derived from the pyrolysis process of eggplant and Acacia nilotica bark at temperatures of 300 °C and 600 °C. An analysis was conducted on the biochar kinds to determine their pH, phosphorus (P), as well as other elemental composition. The proximate analysis was conducted by the ASTM standard 1762-84, while the surface morphological features were measured using a scanning electron microscope. The biochar derived from Acacia nilotica bark exhibited a greater yield and higher level of fixed carbon while possessing a lower content of ash and volatile components compared to biochar derived from eggplant. The eggplant biochar exhibits a higher liming ability at 600 °C compared to the acacia nilotica bark-derived biochar. The calcium carbonate equivalent, pH, potassium (K), and phosphorus (P) levels in eggplant biochars increased as the pyrolysis temperature increased. The results suggest that biochar derived from eggplant could be a beneficial resource for storing carbon in the soil, as well as for addressing soil acidity and enhancing nutrients availability, particularly potassium and phosphorus in acidic soils.

Background: Essential oil nanoemulsions have received much attention in the last period due to their ability to fight microbes and cancers. In the current study, clove and thyme essential oils CL+TH-emulsion and CL+TH-nanoemulsion were prepared through an eco-friendly method. The prepared CL+TH-nanoemulsion was characterized using DLS and TEM analyses. Results: Results revealed that CL+TH-nanoemulsion droplets were spherical in shape and nanoform in size (68.6 nm) with PDI 0.281. MIC concentrations of CL+TH-nanoemulsion against tested bacteria were found to be between 6.25 and 25 mg/mL. After being exposed to MICs of CL+TH-emulsion and CL+TH-nanoemulsion, which additionally prompted 1.43 log and 3.12 log declines, accordingly, as opposed to untreated (Control), the number of cells grown in the generated biofilms decreased. Furthermore, CL+TH-nanoemulsion exhibited anticancer activity more than CL+TH-emulsion toward HepG2 and MCF-7. Also, the effect of CL+TH-nanoemulsion is more effective and significantly cytotoxic than taxol on MCF-7. Besides, both prepared emulsions increased the rate of apoptosis and decreased the cell viability % of MCF-7 by increasing the activity of caspases 8 and 9. Moreover, CL+TH-nano emulsion decreased the activity of VEGFR-2 in MCF-7 in a more pronounced manner than CL+TH-emulsion and taxol. Conclusions: The prepared CL+TH-nanoemulsion had antibacterial, and antibiofilm as well as anticancer properties, which can be used in different biomedical applications after extensive studies in vivo.How to cite: Hashem AH, Doghish AS, Ismail A, et al. A novel nanoemulsion based on clove and thyme essential oils: Characterization, antibacterial, antibiofilm and anticancer activities. Electron J Biotechnol 2024;68. https://doi.org/10.1016/j.ejbt.2023.12.001.

Black tea's quality and flavor are largely influenced by its processing stages, which affect its volatile and non-volatile phytochemicals. This study aimed to optimized black tea manufacturing by investigating withering time, fermentation time, and temperature's impact on sensory quality. Using a U*15 (157) uniform design, optimal conditions were determined: 14 h of withering, 5.6 h of fermentation, and a 34 °C temperature. A verification experiment analyzed the volatile and non-volatile profiles. HPLC, GC–MS, and LC-MS revealed dynamic changes in phytochemicals. Among 157 VOCs and 2642 metabolites, 19 VOCs (VIP > 1.5) were crucial for aroma, while 50 (VIP > 1.5, p

IntroductionSalinity negatively affects maize productivity. However, calcium lignosulfonate (CLS) could improve soil properties and maize productivity.MethodsIn this study, we evaluated the effects of CLS application on soil chemical properties, plant physiology and grain quality of maize under salinity stress. Thus, this experiment was conducted using three CLS application rates, CLS0, CLS5, and CLS10, corresponding to 0%, 5%, and 10% of soil mass, for three irrigation water salinity (WS) levels WS0.5, WS2.5, and WS5.5 corresponding to 0.5 and 2.5 and 5.5 dS/m, respectively.Results and discussionResults show that the WS0.5 × CLS10 combination increased potassium (K 0.167 g/kg), and calcium (Ca, 0.39 g/kg) values while reducing the sodium (Na, 0.23 g/kg) content in soil. However, the treatment WS5.5 × CLS0 decreased K (0.120 g/kg), and Ca (0.15 g/kg) values while increasing Na (0.75 g/kg) content in soil. The root activity was larger in WS0.5 × CLS10 than in WS5.5 × CLS0, as the former combination enlarged K and Ca contents in the root while the latter decreased their values. The leaf glutamine synthetase (953.9 µmol/(g.h)) and nitrate reductase (40.39 µg/(g.h)) were higher in WS0.5 × CLS10 than in WS5.5 × CLS0 at 573.4 µmol/(g.h) and 20.76 µg/(g.h), leading to the improvement in cell progression cycle, as revealed by lower malonaldehyde level (6.57 µmol/g). The K and Ca contents in the leaf (881, 278 mg/plant), stem (1314, 731 mg/plant), and grains (1330, 1117 mg/plant) were greater in WS0.5 × CLS10 than in WS5.5 × CLS0 at (146, 21 mg/plant), (201, 159 mg/plant) and (206, 157 mg/plant), respectively. Therefore, the maize was more resistance to salt stress under the CLS10 level, as a 7.34% decline in yield was noticed when salinity surpassed the threshold value (5.96 dS/m). The protein (13.6 %) and starch (89.2 %) contents were greater in WS0.5 × CLS10 than in WS5.5 × CLS0 (6.1 %) and (67.0 %), respectively. This study reveals that CLS addition can alleviate the adverse impacts of salinity on soil quality and maize productivity. Thus, CLS application could be used as an effective soil amendment when irrigating with saline water for sustainable maize production.

In this study, the dried biomass of four marine algae, namely Porphyra sp., Gracilaria bursa-pastoris, Undaria pinnatifida and Laminaria sp., were screened for their ability to remove methylene blue (MB) dye from aqueous solutions. Statistical approaches of the Plackett-Burman Design (PBD) and Box-Behnken Design (BBD) were applied to optimize different environmental conditions in order to achieve the maximum MB removal percentage by Gracilaria bursa-pastoris. The biosorbent was characterized before and after adsorption process using FTIR, XRD and SEM analysis. Additionally, isotherms, kinetics and thermodynamics studies were conducted to investigate the adsorption behavior of the adsorbent. The results showed that Gracilaria bursa-pastoris achieved the highest dye removal efficiency (98.5 %) compared to 96.5 %, 93.5 % and 93.9 % for Undaria pinnatifida, Porphyra sp. and Laminaria sp., respectively. PBD analysis revealed that the agitation speed, pH, and biomass dose were found to be the significant parameters affecting MB removal onto Gracilaria dried biomass. According to the BBD results, the maximum dye removal percentage (99.68 %) was obtained at agitation speed of 132 rpm, pH 7 and biomass dose of 7.5 g/L. FTIR, XRD and SEM analysis demonstrated the participation of several functional groups in the adsorption process and changes in the cell surface morphology of the adsorbent following the dye adsorption. The adsorption isotherms showed better fit to Freundlich model (R2 = 0.9891) than the Langmuir, Temkin, and Dubinin-Radushkevich models. The adsorption kinetics were best described by the pseudo-second-order model (R2 = 0.9999), suggesting the chemical interactions between dye ions and the algal biomass. The thermodynamic parameters indicated that the adsorption of MB onto Gracilaria dried biomass was spontaneous, feasible, endothermic and random. These results indicate that dried biomass of Gracilaria bursa-pastoris is an attractive, environmentally friendly, cheap and effective agent for MB dye removal from environmental discharges.

Purpose of current study was to determine physicochemical, triglyceride composition, and functional groups of wild adlay accessions (brown, black, yellow, grey, green, off white, and purple) to find out its scope as cereal crop. Triglycerides, minerals and functional groups were determined through Gas chromatography, spectrophotometer and Fourier Transform Infrared (FTIR) spectrophotometer respectively. Results revealed variation among bulk densities, specific densities, percent empty spaces, and corresponding grain counts per 10 g of sample are useful in distinguishing brown, black, yellow, grey, green, off white, and purple wild adlay accessions. Specific density and grain count per 10 g sample was significantly related. No statistical relationship exists among the pronounced physical characteristics. Brown adlay expressed the highest protein, fat, and fiber contents 15.82%, 4.76% and 2.37% respectively. Protein, fat, ash, and fiber percent contents were found comparable to cultivated adlay. Spectrophotometric analysis revealed macro elements including phosphorus, potassium, calcium, and sodium in the range 0.3% - 2.2% and micro elements boron, iron, copper, zinc, and manganese in the range 1.6 mg/kg - 20.8 mg/kg. Gas chromatography showed polyunsaturated fatty acids (PUFA) constitute the primary fraction (39% ± 7.2) of wild adlay triglycerides. Linoleic and palmitic acids were present as prominent fatty acids, 43.5% ±1.4 and 26.3% ±1.4 respectively. Infra-red frequencies distinguished functional groups in narrow band and fingerprint region of protein in association with out of plane region leading to structural differences among adlay accessions. Comparison of major distinguishing vibrational frequencies among different flours indicated black adlay containing highest functional groups appeared promising for varietal development.

The integration of trees into diverse land-use systems holds potential for India to meet nationally determined contribution (NDC) targets under the Paris Climate Agreement. With a target of sequestering 2.5–3 billion tons of CO2 equivalent by 2030, the study focused on the widespread and economically viable eucalyptus-based agroforestry, practiced widely in various planting geometries tailored to meet industrial end-use requirements. In this context, a detailed study was conducted to quantify the influence of five planting geometries [3 m × 3 m, 6 × 1.5 m, 17 × 1 × 1 m (paired row) and two boundary plantations (east–west and north–south directions) at 2 m away from tree to tree] of eucalyptus on intercrops [dhaincha (Sesbania aculeata)—barley (Hordeum vulgare L.) rotation] biomass, soil properties, and carbon stock of the system during 2009–2016. Results revealed that biomass accumulation of different tree components was 62.50%–74.09% in stem; 6.59%–9.14% in branch; 3.18%–5.73% in leaves; 12.20%–20.44% in stump roots; and 1.71%–3.48% in fine roots across the planting geometries. The mean carbon content of the stem, branch, leaves, and roots was 49.00, 47.00, 43.00, and 49.00%, respectively. Over the 8-year period, geometry of 3 × 3 m performed better in terms of total biomass production (344.60 Mg ha− 1 by tree biomass and 62.53 Mg ha−1 by intercrops). The independent parameter, DBH2H (DBH: diameter at breast height and H: tree height), was found to be a very good predictor of dry weight, followed by DBH alone. Among various functions (linear, allometric, logistic, Gompertz, Chapman, and exponential), the best-fit equation was allometric, i.e., B = 300.96 × DBH2H0.93 (adjusted R2 = 0.96) for eucalyptus based on universal model adequacy and validation criteria. The carbon sequestration rate was maximum (20.79 Mg C ha−1 year−1) in 3 × 3 m followed by 17 × 1 × 1 m. The total carbon stock of eucalyptus-based system (tree + crop + soil) varied significantly under different planting geometries and sole crop rotation (dhaincha–barley). The higher carbon stock (237.27 Mg ha−1) was obtained from 3 × 3 m spacing and further partitioning carbon stock in trees—166.29 Mg ha−1, crops—25.01 Mg ha−1 and soil—45.97 Mg ha−1. The paired row spacing (17 × 1 × 1 m) yielded higher crop yield and net returns (Rs. 600,475 ha−1), underscoring wide spacing’s role in system productivity and sustainability. Tree-based systems were valuable components of agriculture, advocating for their widespread adoption to reduce CO2 emissions and generate income through carbon credits. These findings will provide crucial insights into sustainable land-use practices and advance India’s commitment toward adaptation of climate change mitigation strategies.

Abstract The escalating presence of heavy metals (HMs) in the Panjkora River water and their impact on fish pose a significant challenge to both the ecological community and human health. Consequently, a study was conducted with the primary aim of elucidating their influence on human health-related issues. To address this, the concentrations of heavy metals, including arsenic (As), cadmium (Cd), iron (Fe), manganese (Mn), lead (Pb), and zinc (Zn), in both water and the fish species Crossocheilus diplocheilus were investigated across various locations within the study area. The quantification of HMs concentration was carried out utilizing an atomic absorption spectrophotometer. The highest concentration in water was found as 0.060 mg/L for Pb and lowest for Fe, whereas the highest concentration in fish was 2.028 mg/kg for Pb and lowest for As. Human health risk associated with fish eating was evaluated by using health risk indices (HRI) for non-carcinogenic health risks and targeted cancer risk (TR) for carcinogenic health risks. The values of the health risk index (HRI) were found greater than 1 except Fe (0.0792), Zn (0.782), and Mn (0.541). The highest mean HRI > 1 was recorded for As (62.99), Cd (26.85), and Pb (10.56). This implies that fish consumption from river Panjkora is not safe up to some extent. Similarly, the TR value for As, Cd, and Pb was found 2.8 $$\times {10}^{-2}$$ × 10 - 2 , 1.6 $$\times {10}^{-2}$$ × 10 - 2 , 2.8 × $${10}^{-3}$$ 10 - 3 which showed cancer risk. There is a detected risk to human health associated with the consumption of fish from the Panjkora River. The government must implement adaptive measures to address this significant issue of water pollution in the study area. Additionally, there is a need for further extensive and prolonged research studies in this context.

Abstract In the current industrial scenario, cadmium (Cd) as a metal is of great importance but poses a major threat to the ecosystem. However, the role of micronutrient − amino chelates such as iron − lysine (Fe − lys) in reducing Cr toxicity in crop plants was recently introduced. In the current experiment, the exogenous applications of Fe − lys i.e., 0 and10 mg L − 1, were examined, using an in vivo approach that involved plant growth and biomass, photosynthetic pigments, oxidative stress indicators and antioxidant response, sugar and osmolytes under the soil contaminated with varying levels of Cd i.e., 0, 50 and 100 µM using two different varieties of canola i.e., Sarbaz and Pea − 09. Results revealed that the increasing levels of Cd in the soil decreased plant growth and growth-related attributes and photosynthetic apparatus and also the soluble protein and soluble sugar. In contrast, the addition of different levels of Cd in the soil significantly increased the contents of malondialdehyde (MDA) and hydrogen peroxide (H2O2), which induced oxidative damage in both varieties of canola i.e., Sarbaz and Pea − 09. However, canola plants increased the activities of superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and non-enzymatic compounds such as phenolic, flavonoid, proline, and anthocyanin, which scavenge the over-production of reactive oxygen species (ROS). Cd toxicity can be overcome by the supplementation of Fe − lys, which significantly increased plant growth and biomass, improved photosynthetic machinery and sugar contents, and increased the activities of different antioxidative enzymes, even in the plants grown under different levels of Cd in the soil. Research findings, therefore, suggested that the Fe − lys application can ameliorate Cd toxicity in canola and result in improved plant growth and composition under metal stress.

Panicum maximum is planted extensively in tropical and subtropical areas, due to its high-quality forage and high biomass yield. This study aims to assess the varied metabolic dynamics of P. maximum subject to different pollution-related wastewater levels, thus providing information for sustainable agriculture and soil restoration. We analyzed the primary and secondary metabolites in P. maximum subject to two different types of polluted wastewater (WW), compared to a control group. The alterations observed in the metabolite profiles were affected by several factors, including nutrient imbalances and oxidative stress induced by heavy metal accumulation. Initially, the increased nutrient availability stemming from wastewater treatment promoted plant growth; however, this positive effect was later diminished by the adverse impacts of heavy metals, which generated oxidative stress, resulting in metabolic disturbances and a decrease in the plant biomass. Importantly, the substantial increase in antioxidant enzymes, related to primary (e.g., sugars) and secondary metabolites (e.g., phenolics and flavonoids), underscores plants’ adaptive strategies to cope with stress. The increased biosynthesis of flavonoids and phenolic compounds is a protective mechanism against oxidative stress, which also improves the antimicrobial activity, following the activation of key biosynthetic pathways involved in their synthesis. These complex interactions among diverse metabolites suggest that plants exposed to polluted wastewater use various biochemical strategies to increase both their survival and defenses against pathogens. Collectively, these findings emphasize the significance of understanding how wastewater management practices can affect plant health, metabolic responses, and the broader implications for food safety and ecosystem stability.

Some plant species may exhibit new microenvironments which lead to significant changes in the cover and diversity of the coexisting species. In this investigation, we evaluated the effects of Plantago lagopus L. on the cover and diversity of the associated plant species in the urban vegetation. A total of 70 plots were conducted in sites with- and without this species in urban gardens. Cover of the associated species and different diversity indices including species richness, Shannon-Wiener, evenness, and Simpson indices were measured. The allelopathic potential of P. lagopus was verified using its rhizosphere and non-rhizosphere soils on two target species existing within the same environment. Some soil criteria and seed sizes of the associated species were also determined. Most of the coexisting weeds were reduced in terms of their cover in plots with Plantago. The reduction of plant diversity depended on its cover. Besides, the aboveground biomass was reduced in sites comprising Plantago. The degree of inhibition was not related to the seed size of the species found. This species reduced the incident solar radiation and the local temperature over the soil surface. The locations exhibiting such species contained lower contents of available potassium and zinc. Rhizosphere soil of P. lagopus substantially inhibited germination and growth of Amaranthus viridis, but it didn't do so for Medicago lupulina. Reduction in cover, diversity, and biomass of the urban weeds associated with P. lagopus may be related to the reduction of received solar radiation, soil temperature, and nutrient availability. The allelopathic potential of P. lagopus may have a partial role in this reduction. These results suggest that P. lagopus may create a microenvironment of new conditions not favorable for most of the coexisting species.

The exacerbation of climatic changes helped to increase the risk of plant diseases in the world. Based on this concept, we suggest Endophytic fungi (EF) and Salicylic acid (SA) alternatives to reduce the spread of Fusarium wilt disease, which is one of the most important agricultural crops globally. Therefore, this study aims to isolate endophytic fungi and test their ability to stimulate plant resistance against Fusarium wilt disease and study the possibility of combining these isolates with salicylic acid as a therapeutic nutrient for tomato plants. Two fungal endophytes were isolated from Vigna unguiculata seeds (VUS) and identified as Aspergillus oryzae and Aspergillus tubingensis according to morphological and molecular identification. Under pot circumstances, the influence of these two fungal endophytes as tomato fusarial wilt depressants and as plant stimulants was evaluated. The combination of A. oryzae and A. tubingensis exhibited a simultaneous efficacy of 80% in conferring protection against Fusarium wilt, while simultaneously resulting in a notable decreasing diseases index to 16.66%. Treatment of infected plants with A. oryzae and A. tubingensis (single or mixed) and salicylic acid not only deterioration influence of Fusarium wilt on plant fitness, but also showed a significant improvement in the levels of photosynthetic pigments, sugars, proteins and phenols, and enhancement in the activity of antioxidant enzymes. The analysis of variability among endophytic fungi revealed the presence of 17 distinct bands exhibiting polymorphism, accounting for approximately 35.294% of the observed genetic variation. In conclusion, endophytic A. oryzae and A. tubingensis work well as stimuli for tomato plant growth and as a means of boosting the plants’ resistance to Fusarium wilt. Further, A. oryzae and A. tubingensis act synergistically with SA toward improving plant growth and fusarial wilt disease resistance.

Plant functional traits are consistently linked with certain ecological factors (i.e., abiotic and biotic), determining which components of a plant species pool are assembled into local communities. In this sense, non-native naturalized plants show more plasticity of morphological traits by adopting new habitat (an ecological niche) of the invaded habitats. This study focuses on the biomass allocation pattern and consistent traits-environment linkages of a naturalized Datura innoxia plant population along the elevation gradient in NW, Pakistan. We sampled 120 plots of the downy thorn apple distributed in 12 vegetation stands with 18 morphological and functional biomass traits during the flowering season and were analyzed along the three elevation zones having altitude ranges from 634.85 m to 1405.3 m from sear level designated as Group I to III identified by Ward's agglomerative clustering strategy (WACS). Our results show that many morphological traits and biomass allocation in different parts varied significantly (p

Abstract To eliminate lead (Pb) ions from metallic solutions, the cationic resin in solid form was utilized. The characterization of the adsorbent was performed using GTA/GTD, SEM spectroscopy, and EDX analysis. The results of these analyses provided insights into the structure and composition of the resin. The removal of Pb (II) ions was found to be highly dependent on various parameters. Firstly, the pH of the metal solution played a crucial role, as the adsorption capacity increased with the pH of the solution, at a maximum equal to (R = 84.78%), at a pH = 8.0. Additionally, the concentration of Pb (II) ions present in the solution influenced the adsorption technique’s capacity, with higher concentrations leading to increased adsorption, analysis overhead of high concentration present (100 mg L−1) of the metal lead (II) study, a saturation corresponding a plateau to the resin polymeric saturation is 93.18 mg g−1. To determine the optimal mass of the resin adsorbent, a study was conducted to maximize the removal of Pb (II) ions, at the mass 1.0 g showed that the proportion of inorganic pollutants removed from Pb (II) is entirely qualitative (100%). Furthermore, the effect of temperature on the adsorption process was investigated. It was observed that the rate of the Pb (II) adsorption process decreased as the temperature increased. Kinetic studies were performed to gain further insights into the adsorption process. Pseudo-first-order and pseudo-second-order models, along with the intra-particle diffusion model, were utilized for this purpose. The results indicated that the adsorption process was fast, as evidenced by the findings from the pseudo-second-order study. The saturation technical process was studied, employing several different isothermal models, including Langmuir, Freundlich, and Temkin. Among these models, the Langmuir model was found to best describe the phenomenon of lead metal adsorption by the resin polymeric, is equal to 11.23 mg g−1, with the experimental value precisely (R2 = 0.999). Finally, various thermodynamic techniques were applied to analyze the adsorption process. The thermodynamic parameters such as ΔG° (− 9.78 to − 9.27 kJ mol−1), ΔH° (14.85 kJ mol−1), and ΔS° (0.017 kJ mol−1) were determined. These values indicated that the adsorption process was endothermic and spontaneous, further emphasizing its impetuous nature. The results of the molecular dynamics calculations demonstrated that amino groups are very important in defining the characteristics of cation adsorption. We conclude that this new adsorbent has the potential to significantly improve the process of regularly removing heavy metal ions from wastewater.

Dryopteris filix-mas (hereafter D. filix-mas), a wild leafy vegetable, has gained popularity among high mountain residents in the Hindukush-Himalaya region due to its exceptional nutritional profile, and their commercial cultivation also offers viable income alternatives. Nevertheless, besides phytochemicals with medicinal applications, ecological factors strongly affect their mineral contents and nutritional composition. Despite this, little has been known about how this wild fern, growing in heterogeneous ecological habitats with varying soil physiochemical properties and coexisting species, produces fronds with optimal mineral and nutritional properties. Given its nutritional and commercial significance, we investigated how geospatial, topographic, soil physiochemical characteristics and coexisting plants influence this widely consumed fern’s mineral and nutrient content. We collected soil, unripe fern fronds, and associated vegetation from 27 D. filix-mas populations in Swat, NW Pakistan, and were analyzed conjointly with cluster analysis and ordination. We found that the fronds from sandy-loam soils at middle elevation zones exhibited higher nitrogen contents (9.17%), followed by crude fibers (8.62%) and fats (8.09%). In contrast, juvenile fronds from the lower and high elevation zones had lower moisture (1.26%) and ash (1.59%) contents, along with fewer micronutrients such as calcium (0.14–0.16%), magnesium (0.18–0.21%), potassium (0.72–0.81%), and zinc (12% mg/kg). Our findings indicated the fern preference for middle elevation zones with high organic matter and acidic to neutral soil (pH ≥ 6.99) for retaining higher nutritional contents. Key environmental factors emerged from RDA analysis, including elevation (r = −0.42), aspect (r = 0.52), P-3 (r = 0.38), K+ (r = 0.41), EC (r = 0.42), available water (r = −0.42), and field capacity (r = −0.36), significantly impacting fern frond’s mineral accumulation and nutrient quality enhancement. Furthermore, coexisting plant species (r = 0.36) alongside D. filix-mas played a pivotal role in improving its mineral and nutritional quality. These findings shed light on the nutritional potential of D. filix-mas, which could help address malnutrition amidst future scarcity induced by changing climates. However, the prevalent environmental factors highlighted must be considered if the goal is to cultivate this fern on marginal lands for commercial exploitation with high mineral and nutrient yields in Hindukush-Himalaya.

Nano-fertilizers protect the soil from the excessive addition of traditional fertilizers, enhancing the efficiency of the elements and diminishing the number of additive fertilizers. The effect of Fe2O3NPs-Boron (Fe2O3NPs-B), and Fe2O3 NP-Humic Acid (Fe2O3NPs-HA) at 100, 150 and 250 ppm, Fe2O3, and control (without any iron fertilizers) on the vegetative growth, flowering, photosynthetic pigments, nutrient element content and isozymes activity (peroxidase, superoxide dismutase and polyphenol oxide) of Gardenia jasminoides plants was investigated. Gamma-rays at 25 kGy were conducted for the promising synthesis of Fe2O3NPs-B, and Fe2O3NPs-HA. The experiment was carried out under greenhouse conditions during two successive seasons. The results stated that Fe2O3NPs-B and Fe2O3NPs-HA at the highest concentration (250 ppm) had a significant positive effect in all vegetative characteristics, photosynthetic pigments, nutrient element content and isozymes activity. Fe2O3NPs-HA showed the optimal result in all morphological and biochemical characteristics. The highest activity of enzymes appeared in the treated plants with Fe2O3 NPs-B followed by Fe2O3 NPs-HA at 250 ppm. The advantage nano-fertilizer usage may be summarized as saving the soil from the unreasonable accumulation of classic fertilizers, improving the use efficiency of parts and reducing the number of different fertilizers as a consequence of their increased surface area and their nano-size.

Introduction: This study aims to assess the extent of heavy metal contamination in urban soils in sixteen selected cities of Pakistan, encompassing the elements cadmium (Cd), lead (Pb), cobalt (Co), zinc (Zn), chromium (Cr), nickel (Ni), manganese (Mn), iron (Fe), and copper (Cu).Methods: The data utilized for this study was collected from online literature during the period 2005 to 2019. This study investigated potential threats to human health through a comprehensive analysis, considering standards such as Enrichment Factors (EF), Geo-accumulation Indices (Igeo), and Human Health Risk Assessment (HHRA).Results: Geo-accumulation Index results indicated varied risk intensities, with Cu, Pb, Co, Mn, and Fe exhibiting “no pollution” levels, while other elements show “moderate to extremely contaminated” values. EF analysis provided evidence of heavy metal presence, revealing a spectrum from “no pollution” to “moderate to extremely high pollution” for Cd, Zn, Cr, Ni, and Cu. The health risk assessment identified both carcinogenic and non-carcinogenic dangers for adults and children.Discussion: These findings highlighted the substantial contribution of identified sources such as industrial processes, vehicular emissions, sewage sludge, urban flooding, and the production and use of metallic materials that have elevated heavy metal levels in the urban soils. This established the link between urban industrial zones, human health, and long-term economic sustainability. This study provides essential guidance for decision makers to develop effective strategies for soil remediation, enhanced industrial practices, and regulatory measures to address heavy metal contamination in urban areas, ensuring the wellbeing and sustainable environmental quality management in cities.

Drought stress is an important challenge to global food security and agricultural output, and dramatic and rapid climate change has made the problem worse, causing unexpected impacts on the growth, development, and yield of different plants. Understanding the biochemical, ecological, and physiological reactions to these pressures is essential for improved management. Carbon materials’ impacts on plants subjected to different stresses are still poorly studied. Thus, this study was carried out investigate the feasibility of applying carbon nanotubes (CNTs) (0, 20, and 40 mg/L) as a foliar treatment for mitigating the effect of water stress (100%, 75%, and 50% irrigation water, IW) on peanut plants growing in sandy soil through assessments of growth and productivity and some physiological and biochemical measurements. Exposure of peanuts to decreased irrigation water led to significant decreases in growth, yield, photosynthetic pigments, indole acetic acid (IAA), and some nutritional components in peanut seeds, but increased levels of osmolytes such as total soluble carbohydrates (TSS) and proline, in addition to free amino acids and phenolics. However, foliar spraying with CNTs could ameliorate the impacts of decreased irrigation water on growth and production via enhancing the studied physiological parameters, such as photosynthetic pigments, IAA, osmolytes, and phenolics. Furthermore, the application of carbon nanotubes improved the nutrient contents, as expressed by the oil yield, protein yield, total carbohydrates, antioxidant activities (DPPH), B-carotene, lycopene, and flavonoids in peanut seeds, either under normal or water stress conditions. The higher level of CNTs (40 mg/L) was more effective than the lower one (20 mg/L) at increasing the above-mentioned parameters. In conclusion, foliar treatment with carbon nanotubes has the ability to enhance peanut drought tolerance and increase its growth and productivity under sandy soil conditions.

The tolerance of Chenopodium ambrosioides to some heavy metals under in vitro environment was thoroughly investigated. A micropropagation protocol was developed to facilitate the mass production of plants and to identify metals-tolerant species for potential use in the restoration of polluted areas. Nodal explants exhibited callus formation when treated with N6-benzyladenin (BA) (1.5 mg/l) and a combination of BA/α-naphthalene acetic acid (NAA) at concentrations of 1.5/1.0 mg/l on the Murashige and Skoog (MS) medium. The optimal shoot formation was achieved with the callus grown on a medium enriched with 1.5/1.0 mg/l BA/NAA, resulting in an impressive number (21.89) and length (11.79 cm) of shoots. The in vitro shoots were rooted using NAA (1.0 and 1.5 mg/l) and were acclimatized in pots with 71% survival rate. After standardizing micropropagation protocol, the in vitro shoots were subjected to various doses of lead nitrate (Pb(NO3)2 and cadmium chloride (CdCl2). Pb(NO3)2 and CdCl2 in the media let to a reduction in shoot multiplication, decreasing from 18.73 in the control group to 11.31 for Pb(NO3)2 and 13.89 for CdCl2 containing medium. However, Pb(NO3)2 and CdCl2 promoted shoot length from 5.61 in the control to 9.86 on Pb(NO3)2 and 12.51 on CdCl2 containing medium. In the case of Pb(NO3)2 treated shoots, the growth tolerance index (GTI) ranged from117.64% to 194.11%, whereas for CdCl2 treated shoots, the GTI ranged from 188.23% to 264.70%. Shoots treated with high level of Pb(NO3)2induced reddish-purple shoots, while a low level of Pb(NO3)2 induced shoots displayed both green and reddish-purple colors in the same explants. In CdCl2 treated culture, the toxic effects were narrow leaf lamina, elongated petiole and a dark reddish purple coloration. These findings highlight the remarkable potential of C. ambrosioides to maintain growth and organogenesis even in the presence Pb(NO3)2 and CdCl2 on the MS medium, indicating a high degree of metal tolerance.

Textile-based photocatalysts are the new materials that can be utilized as an effective sustainable solution for biochemical hazards. Hence, we aimed to develop a sustainable, cost-effective, and facile approach for the fabrication of photocatalytic fabric using graphitic carbon nitride (g-C3N4) and ferric-based multifunctional nanocomposite. Bulk g-C3N4 was prepared from urea by heating it at 500 °C for 2 h. The structure of ball-milled g-C3N4 was engineered by doping with various amounts of iron (III) chloride hexahydrate solution (0.006 mol/L) and sintered at 90 °C for 24 h to prepare g-C3N4–nanosheets/α-Fe2O3 composites. These nanocomposites have potential avenues towards rational designing of g-C3N4 for improved photocatalytic, antibacterial, and antiviral behavior. The prepared nanocomposite was characterized for its surface morphology, chemical composition, crystal structure, catalytic, antibacterial, and antiviral behavior. The fabrication of ferric doped g-C3N4 nanocomposites was characterized by SEM, EDX, FTIR, and XRD analysis. The coated fabric nanocomposite was characterized for methylene blue dye degradation under visible light, antibacterial and antiviral behavior. The developed textile-based photocatalyst has been found with very good recyclability with photocatalytic degradation of dye up to 99.9 % when compared to conventional g-C3N4 powder-based photocatalyst.

Recent anthropogenic sources and excess usage have immensely threatened the communities and habitat ecology of this region’s medicinally and economically significant crops. Therefore, our study aims to evaluate the community structure and related environmental characteristics sustaining Nasturtium officinale communities along the river basin (RB) in Northwest Pakistan, using the clustering procedure (Ward’s method) and Redundancy analysis (RDA). From 340 phytosociological plots (34 × 10 = 340), we identified four ecologically distinct assemblages of N. officinale governed by different environmental and anthropogenic factors for the first time. The floristic structure shows the dominance of herbaceous (100%), native (77%), and annual (58.09%) species indicating relatively stable communities; however, the existence of the invasive plants (14%) is perturbing and may cause instability in the future, resulting in the replacement of herbaceous plant species. Likewise, we noticed apparent variations in the environmental factors, i.e., clay percentage (p = 3.1 × 10−5), silt and sand percentage (p< 0.05), organic matter (p< 0.001), phosphorus and potassium (p< 0.05), and heavy metals, i.e., Pb, Zn, and Cd (p< 0.05), indicating their dynamic role in maintaining the structure and composition of these ecologically distinct communities. RDA has also demonstrated the fundamental role of these factors in species–environment correlations and explained the geospatial variability and plants’ ecological amplitudes in the Swat River wetland ecosystem. We concluded from this study that N. officinale communities are relatively stable due to their rapid colonization; however, most recent high anthropogenic interventions especially overharvesting and sand mining activities, apart from natural enemies, water deficit, mega-droughts, and recent flood intensification due to climate change scenario, are robust future threats to these communities. Our research highlights the dire need for the sustainable uses and conservation of these critical communities for aesthetics, as food for aquatic macrobiota and humans, enhancing water quality, breeding habitat, fodder crop, and its most promising medicinal properties in the region.

IntroductionNon-native species are globally successful invaders with negative impacts on vegetation communities’ social, economic, and ecological values. Hence, the current research was carried out to assess the spatial distribution patterns and vegetative diversity of the four non-native species in severely invaded areas of the semi-arid parts of northern Pakistan.MethodsThe research was conducted using data from 1065 plots spread across 165 sites. These sites represented habitats throughout Northern Province, such as farm countryside, highlands, and abandoned places in rural and urban areas.Results and discussionThe communities were floristically diverse, represented by 107 plant species, and dominated mainly by annual and perennial life forms with herbaceous habits. Similarly, the floristic structure shows significant variation tested by the χ2 test (P< 0.05) for plant status, life forms, life cycle, and habitat base distribution. In addition, the diversity indices show significant variation having the highest diversity in C-III (P. hysterophorus-dominated sites) and lowest in C-IV (S. marianum-dominated sites, i.e., primarily pure communities), indicating non-native species may increase or decrease site diversity. The diversity communities were further supported by higher quantities of soil nutrients, i.e., organic percentage (2.22 ± 0.04). Altitude, soil nutrients, and texture were shown to be the environmental factors most associated with communities that non-native species had invaded.RecommendationIt is recommended that relevant, additional soil and climatic parameters be integrated into species distribution models to improve our understanding of the ecological niches of different species and to make a collective approach for preserving and conserving native plant communities.

Textile dyes are one of the major water pollutants released into water in various ways, posing serious hazards for both aquatic organisms and human beings. Bioremediation is a significantly promising technique for dye decolorization. In the present study, the fungal strain Lasiodiplodia sp. was isolated from the fruiting bodies of Schizophyllum for the first time. The isolated fungal strain was examined for laccase enzyme production under solid-state fermentation conditions with wheat bran (WB) using ABTS and 2,6-Dimethoxyphenol (DMP) as substrates, then the fermented wheat bran (FWB) was evaluated as a biosorbent for Congo red dye adsorption from aqueous solutions in comparison with unfermented wheat bran. A Box–Behnken design was used to optimize the dye removal by FWB and to analyze the interaction effects between three factors: fermentation duration, pH, and dye concentration. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were applied to study the changes in the physical and chemical characteristics of wheat bran before and after fermentation. An additional experiment was conducted to investigate the ability of the Lasiodiplodia sp. YZH1 to remove Congo red in the dye-containing liquid culture. The results showed that laccase was produced throughout the cultivation, reaching peak activities of ∼6.2 and 22.3 U/mL for ABTS and DMP, respectively, on the fourth day of cultivation. FWB removed 89.8% of the dye (100 mg L−1) from the aqueous solution after 12 h of contact, whereas WB removed only 77.5%. Based on the Box–Behnken design results, FWB achieved 93.08% dye removal percentage under the conditions of 6 days of fermentation, pH 8.5, and 150 mg L−1 of the dye concentration after 24 h. The fungal strain removed 95.3% of 150 mg L−1 of the dye concentration after 8 days of inoculation in the dye-containing liquid culture. These findings indicate that this strain is a worthy candidate for dye removal from environmental effluents.

Exotic plants usually exhibit problems for native species where they coexist. This study evaluated the effect of naturalized alien Cenchrus echinatus L. on native plants in urban vegetation. A field trial was conducted to assess the effect of this species on the cover and diversity of the native vegetation. The allelopathic potential of such species was examined. Sites comprising C. echinatus had a lower cover than some native species. Lower floristic diversity was observed at higher densities of this plant. The soil under this plant attained lower N, P, and K contents. This soil had no effect on the germination and growth of native species. It also comprised germinable seeds of some species which were absent from the standing vegetation. Exotic C. echinatus may exert negative effects on the native vegetation of the urban plant communities. A dense cover of this species may inhibit the germination of native species, leading to a reduction in their cover. Reduction in cover and diversity of native species may not be attributed to allelopathy. These results suggest that naturalized C. echinatus may be more competitive than the native ones, particularly at higher densities. Furthermore, it may represent a threat to the native plants in the urban vegetation.

IntroductionIt is well known that different ecotypes adopt different mechanisms to survive under environmental stress conditions. In this regard, each ecotype showed different type of modifications for their existence in a specific habitat that reflects to their ecological success.MethodsHere, differently adapted ecotypes of Bermuda grass [Cynodon dactylon (L.) Pers.] were collected to evaluate their differential structural and functional modifications that are specific to cope with environmental stress conditions. The soil that adheres ecotypes roots were highly saline in case of DF-SD (Derawar Fort-Saline Desert), UL-HS (Ucchali Lake-Hyper Saline) and G-SSA (Gatwala-Saline Semiarid) ecotypes. Soils of S- HS (Sahianwala-Hyper Saline), S-SW (Sahianwala-Saline Wetland) and PA-RF (Pakka Anna-Reclaimed Field) were basic (pH 9 to 10). Soils of UL-HS and PA- HS (Pakka Anna-Hyper Saline), KKL-S (Kalar Kahar Lake-Saline), BG-NS (Botanic Garden-Non Saline) and G-SSA were rich in organic matter, and soil of BG-NS and DF-SD were rich in minerals. Anatomical modifications were performed by using the free hand sectioning technique and light microscopy.Results and DiscussionDF-SD is one of the best ecotypes which showed anatomical modifications to cope with environmental changes. These modifications included stem cross-sectional area and leaf sheath thickness that contribute towards water storage, vascular tissues for proficient translocation of solutes and trichomes that provide resistance to water loss. On the other hand, sclerification in root is the only notable modification in the Gatwala Saline Semiarid (G-SSA) ecotype from saline arid habitat where rainfall is not as low as in the Cholistan Desert. Two ecotypes from hyper-saline wetlands, UL-HS and KL-HS showed increased number and size of vascular tissue, central cavity and sclerification in stem which are important for solutes conduction, water loss and salts bulk movement, respectively. The ecotype from reclaimed site was not much different from its counterpart from hyper-saline dryland. Overall, anatomical modifications to maintain water conservation are key mechanisms that have been identified as mediating stress tolerance in C. dactylon ecotypes.

Maintaining the plant architecture of Psidium guajava L. (guava tree) is essential for enhancing capture and distribution in the plant, directly affecting the fruit quality. The lifespan of the harvest period can be extended by proper pruning. Both timeliness and proper pruning play crucial roles in achieving high-quality fruit production and in maintaining a consistent fruit size while stimulating ascorbic acid levels, sugar content, total soluble solids (TSS), and titratable acidity. From this perspective, this study aimed to characterize the influence of different intensities of fruit pruning and thinning on guava trees grown under a seasonal tropical climate in two growing seasons in Currais, Piauí, Brazil. The experiment was set up in a randomized block design with a 3 × 3 × 2 factorial arrangement corresponding to short, medium, and long pruning intensities and 0%, 10%, and 20% thinning intensities during the two growth seasons, respectively. An analysis was performed to discriminate the treatment groups according to the physicochemical variables of the guava tree cv. Paluma and canonical discriminant analysis. There was significant variation in the SS, titratable acidity, ascorbic acid, and pH contents. Cluster analysis of all treatments allowed division into five different groups for the two pruning times. Canonical discriminant analysis showed that the first two canonical variables explained 91% of the total variance. The fruits of the second harvest exhibited a lower level of acidity, higher levels of soluble solids, and higher levels of ascorbic acid contents. In addition, these fruits also obtained better nutrient contents. Short pruning with up to 20% thinning, medium pruning with up to 10%, and long pruning without thinning favored better levels of macronutrients and micronutrients and, consequently, better fruit quality. Medium or long pruning with up to 20% thinning resulted in higher average fruit weights and nutrient contents (especially of Fe and Cu), lower acidity, and higher ascorbic acid contents. Thus, in general, the importance of production pruning in guava plants is evidenced and thinning of 20% is recommended to improve the fruit quality.

Delayed sowing of wheat is a common problem in Punjab that exacerbates serious yield loss. However, individual or combined applications of seed rate and slow-release nitrogen fertilizer significantly impacted their efficacy in improving crop growth and productivity. In this regard, the present study explored the potential of slow-release nitrogen fertilizers (control (CK), simple urea (SU), neem-coated urea (NCU), and sulfur-coated urea (SCU)) to improve the growth, yield, and physiological and biochemical attributes of delayed sown wheat with three seed rate [(100 kg ha−1 (S1), 125 kg ha−1 (S2), and 150 kg ha−1 (S3)]. The study was carried out at the Postgraduate Agricultural Research Station of the University of Agriculture Faisalabad in 2018–19 and 2019–20. The study findings revealed that the sulfur-coated urea performed better under S3 seed rate. Combining SCU with S3 significantly increased leaf area index by 0.99 cm2 and plant height by 8.24% compared to simple urea, maximum spikelets, and spike length by 3.9 and 3.8 cm, respectively. The SCU with S3 treatment also increased the biological yield by 43% and 41% and the grain yield by 46% in 2018–2019 and 2019–2020, respectively, compared to CK. Similarly, higher N contents in straw and grain were recorded in the interaction of SCU with S3 treatment. Likewise, the SCU with S3 treatment enhanced the physiological attributes, i.e., chlorophyll contents and transpiration rate, by 18% and 25%, respectively, and decreased internal CO2 by 25.5%, compared to CK. In conclusion, applying sulfur-coated urea with a seed rate of 150 kg ha−1 could be considered a potential strategy for improving the growth and productivity of delayed sown wheat.

Sugarcane harvesting requires improvements, particularly in cutting tools. Continuous cutting saws have been introduced as a solution to this issue. This study evaluates the performance of two basal sugarcane cutting systems in different fields: a traditional impact cut system (ICS) with knives and a continuous cut system (CCS) with saw blades. Tests were conducted during two crop cycles in three areas, using a 3 × 2 factorial design with two cutting devices and four replications per treatment. Cut quality indices and ratoon damage were analyzed using descriptive statistics. Raw material losses were subjected to the Shapiro–Wilk normality test, ANOVA, and Tukey’s test at 5% probability. Significant differences in cutting quality were found across different areas. The total crop productivity influenced sugarcane cut quality, with the CCS showing (0.8 Mg ha−1) visible losses in higher productivity areas, which is a 74% increase compared to the ICS. In lower productivity areas, the CCS demonstrated better loss performance (0.8 Mg ha−1). Additionally, the stumps damage rate for the CCS was lower than that for the ICS (0.15 and 0.28, respectively), indicating that saws can preserve cane fields and enhance longevity.

Plants are sessile and mostly exposed to various environmental stresses which hamper plant growth, development, and significantly decline its production. Drought stress is considered to be one of the most significant limiting factors for crop plants, notably in arid and semi-arid parts the world. Therefore, the present study aimed to evaluate the potential impact of different concentrations (10, 100, and 200 µg/mL) of kinetin capped zinc oxide nanoparticles (Kn-ZnONPs) on Vigna radiata (L.) R. Wilczek under varying levels (5%, 10%, 15%) of PEG-induced drought stress. ZnONPs were synthesized by a co-precipitation method using Zinc acetate as a precursor at pH-12, incinerated to 500 °C, and kinetin was used as a surface functionalizing agent. The resulting Kn-ZnONPs were characterized by various contemporary analytical techniques, including SEM, SEM-EDS, XRD, DLS, and Zeta potential and IR spectroscopy. Crystalline Kn-ZnONPs, with a zeta potential of 27.8 mV and a size of 67.78 nm, of hexagonal wurtzite structure and vibrational stretches associated with N-H, C-O, C-N, etc., were confirmed. PEG-induced drought stress significantly reduced the growth of V. radiata by declining the chlorophyll and carotenoid contents. Moreover, a significant decrease in the levels of superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), ascorbate peroxidase (APX), soluble sugar contents, proline, protein contents, phenol, and tannin were observed compared to the control. However, the exogenous application of Kn-ZnONPs ameliorated all photosynthetic parameters by up-regulating the antioxidant defense system through the promotion of SOD, POD, CAT, and lipid peroxidation levels. The biochemical parameters, such as proteins, soluble sugars, and proline, were observed to be maximum in plants treated with 200 µg/mL Kn-ZnONPs under 5% drought stress. The application of Kn-ZnONPs also enhanced the total phenol contents, flavonoid, and tannin contents. In conclusion, the findings of this study demonstrate that the exogenous application of Kn-ZnONPs provides beneficial effects to V. radiata by attenuating the damaging effects of drought stress through the up-regulation of the antioxidant defense system and osmolytes. These results suggest that Kn-ZnONPs have potential as a novel approach to improve crop productivity under drought stress conditions.

The elevation is an important gradient across which the environmental variables and plant traits vary and is considered as a barrier to the recent global problem of plant invasion. However, certain invasive plants show plasticity traits to adapt and cope with the changes across the elevation. Silybum marianum (S. marianum) is one such invasive species widely spread in Khyber Pakhtunkhwa, Pakistan. Therefore, this study investigates the traits plasticity and invasive behaviors of this plant species across the elevation gradient. Plant functional traits (PFTs) and environmental variables were recorded in forty different low, middle, and high elevation sites. The plant shows a decrease in plant functional traits, i.e., above-ground plant height/plant, leaf length/leaf, leaf width/leaf, leaf dry weight/plant, vegetative dry weight/plant, and number of capitula/plant having the significance of p < 0.05. In contrast, the dry reproductive weight does not change significantly with elevation, while the root length increases across the elevation. The soil and environmental variables such as organic matter, lime percentage, and latitude significantly affected the PFTs. The importance value index of the species was also related to elevation and diversity indices, i.e., species richness, Shannon–Wiener diversity index, and evenness index, indicating that the invasion has strong effects on diversity. This study concludes that S. marianum has traits plasticity across the elevation and affects community diversity. Further investigation is required to understand the invasion and diversity parameters in a better way.

The continuous increase in the heavy metals concentration in the soil due to anthropogenic activities has become a global issue. The chromium, especially hexavalent chromium, is highly toxic for living organisms due to high mobility, solubility, and carcinogenic properties. Considering the beneficial role of nanoparticles and bacteria in alleviating the metal stress in plants, a study was carried out to evaluate the role of cerium dioxide (CeO2) nanoparticles (NPs) and Staphylococcus aureus in alleviating the chromium toxicity in sunflower plants. Sunflower plants grown in chromium (Cr) contaminated soil (0, 25, and 50 mg kg−1) were treated with CeO2 nanoparticles (0, 25, and 50 mg L−1) and S. aureus. The application of Cerium Dioxide Nanoparticles (CeO2 NPs) significantly improved plant growth and biomass production, reduced oxidative stress, and enhanced the enzymatic activities in the sunflower plant grown under chromium stress. The application of S. aureus further enhanced the beneficial role of nanoparticles in alleviating metal-induced toxicity. The maximum improvement was noted in plants treated with both nanoparticles and S. aureus. The augmented application of CeO2 NPs (50 mg l−1) at Cr 50 mg kg−1 increased the chl a contents from 1.2 to 2.0, chl b contents 0.5 to 0.8 and mg g−1 FW, and decreased the leakage of the electrolyte from 121 to 104%. The findings proved that the application of CeO2 nanoparticles and S. aureus could significantly ameliorate the metal-induced stress in sunflower plants. The findings from this study can provide new horizons for research in the application of nanoparticles in phytoremediation and bioremediation.

Different industrial and agricultural practices release a variety of dyes and pesticides in soil and water. Degradation of these pollutants is very important to avoid health and environmental issues. In this study, the photocatalysis technique has been optimized and adopted to degrade organic and inorganic pollutants. First of all, biochar with distinctive physicochemical properties, like high specific surface, highly carbonaceous property, and the electron-conductive nature was prepared in a vacuum furnace from maize straw. These properties depicted the effective absorbance ability of prepared biochar. Using a solvent-free ball-milling method, ZnO loaded maize biochar nanocomposite (MB-ZnO) was synthesized from this biochar and used as a photocatalyst to degrade aqueous pollutants, under different light sources. The adsorption and photocatalytic activity of MB-ZnO was assessed against Safranin O (Saf) and Mancozeb (MC) within a closed system using different light conditions including dark, UV and visible light. To understand the mechanism of Saf and MC removal from aqueous solution, reaction kinetics was calculated according to the pseudo-first-order kinetic model. MB-ZnOcomposite exhibited variable photocatalytic performances to degrade Saf under visible light (83.5%), UV radiations (81.0%) and dark conditions (78%) in 60 min. Similarly, maximum MC degradation by MB-ZnO nanocomposite was exhibited in visible light (56.5%), followed by UV radiations (27.5 %) and dark conditions (25.2%). The findings of this study concluded that MB-ZnO nanocomposite can be used as an excellent catalyst to remove aqueous pollutants, under both light and dark conditions.

Leafy vegetable crops are considered as a natural source of mineral nutrients that could decrease the risk factor of many growth issues in children and adults. Spinach is globally considered as the most desirable leafy crop, due to its taste and nutrient richness along with greater nitrate contents and better nitrogen use efficiency. To evaluate the mineral nutrient efficiency of this crop, thirty genetically diverse spinach accessions were analyzed through nutritional and functional marker strategies. The accession 163,310 from Pakistan was found to be rich in minerals (sodium, calcium, potassium, zinc, and manganese) and nitrates. However, the oxalate contents were lesser in the accessions that had greater quantity of nutrients. These represented a negative correlation between mineral availability and oxalate accumulation in the leaves. To study the relationship of oxalates and minerals in the accessions, a functional marker analysis was performed, based on the genes involved in oxalate metabolism and disease resistance in spinach. High level of genetic polymorphism was observed among the accessions represented with 115 polymorphic bands out of 130 bands. Heat map clustering represented the accessions from Asian countries (Pakistan, India, China, and Iran) as the most adaptable accessions to the local environment. The correlation between nutritional and genetic analysis also revealed the nutrient richness of these accessions along with good oxalate metabolism and disease resistance. Hence, these accessions could be considered as useful genotypes in future breeding programs.

Genotype × environment (G×E) interaction is an important source of variation in soybean yield, which can significantly influence selection in breeding programs. This study aimed to select superior soybean genotypes for performance and yield stability, from data from multi-environment trials (METs), through GGE biplot analysis that combines the main effects of the genotype (G) plus the genotype-by-environment (G×E) interaction. As well as, through path analysis, determine the direct and indirect influences of yield components on soybean grain yield, as a genotype selection strategy. Eight soybean genotypes from the breeding program of Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) were evaluated in field trials using a randomized block experimental design, in an 8 x 8 factorial scheme with four replications in eight different environments of the Cerrado of Northeastern Brazil during two crop seasons. Phenotypic performance data were measured for the number of days to flowering (NDF), height of first pod insertion (HPI), final plant height (FPH), number of days to maturity (NDM), mass of 100 grains (M100) and grain yield (GY). The results revealed that the variance due to genotype, environment, and G×E interaction was highly significant (P < 0.001) for all traits. The ST820RR, BRS 333RR, BRS SambaíbaRR, M9144RR and M9056RR genotypes exhibited the greatest GY stability in the environments studied. However, only the BRS 333RR genotype, followed by the M9144RR, was able to combine good productive performance with high yield stability. The study also revealed that the HPI and the NDM are traits that should be prioritized in the selection of soybean genotypes due to the direct and indirect effects on the GY.

The validation of underexplored traditional plant remedies represents a reservoir of novel leads for drug discovery. In line with this, in vitro total phenolics and flavonoids content, multimode antioxidants, antimicrobial, cytotoxicity, and protein kinase inhibition assays were conducted on C. ambrosioides seed extracts in addition to RP-HPLC. Methanol extract exhibited highest total phenolics (64.6±0.6 μg gallic acid equivalent/mg) and flavonoids (50.9±0.5 μg quercetin equivalent/mg) content. RP-HPLC quantified rutin (1.98 μg/mg) in methanol extract whereas quercetin (0.322 μg/mg) and kaempferol (2.86 μg/mg) in methanol-distilled water extract. Methanol extract exhibited highest ascorbic acid equivalent (AAE) free radical (DPPH) scavenging (IC50 of 110.7±5 μg/ml), total antioxidant capacity (110.6±2.2 μg AAE/mg), and total reducing power (94.30±0.46 μg AAE/mg). Highest antibacterial activity against K. pneumonia (14±1.61 mm ZOI) and antifungal activity against F. solani (17±1.38 mm ZOI) were shown by n-hexane and chloroform extracts, respectively. Ethyl acetate extract exhibited highest brine shrimps cytotoxicity (LC50 of 125 μg/ml). A noteworthy protein kinase inhibitory potential was shown by ethanol extract with a 20±1.27 mm bald zone. Therapeutic potential of medicinal plants can be completely explored by using multiple solvent system. This study makes C. ambrosioides, a resourceful prospect for the bioactivity-guided isolation of lead compounds.

H5N1 virus (H5N1V) is highly contagious among birds and it was first detected in humans in 1997 during a poultry outbreak in Hong Kong. As the mechanism of its pathogenesis inside the host is still lacking, in this in-silico study we hypothesized that H5N1V might create miRNAs, which could target the genes associated with host cellular regulatory pathways, thus provide persistent refuge to the virus. Using bioinformatics approaches, several H5N1V produced putative miRNAs as well as the host genes targeted by these miRNAs were found. Functional enrichment analysis of targeted genes revealed their involvement in many biological pathways that facilitate their host pathogenesis. Eventually, the microarray dataset (GSE28166) was analyzed to validate the altered expression level of target genes and found the genes involved in protein binding and adaptive immune responses. This study presents novel miRNAs and their targeted genes, which upon experimental validation could facilitate in developing new therapeutics against H5N1V infection.