Search

The escalating challenge of waste management demands innovative strategies to mitigate environmental impacts and harness valuable resources. This study investigates waste-to-energy (WtE) technologies for municipal waste management in Kočevje, Slovenia. An analysis of available waste streams reveals substantial energy potential from mixed municipal waste, biodegradable waste, and livestock manure. Various WtE technologies, including incineration, pyrolysis, gasification, and anaerobic digestion, are compared. The results show that processing mixed municipal waste using thermochemical processes could annually yield up to 0.98 GWh of electricity, and, separately, 3.22 GWh of useable waste heat for district heating or industrial applications. Furthermore, by treating 90% of the biodegradable waste, up to 1.31 GWh of electricity and 1.76 GWh of usable waste heat could be generated annually from biodegradable municipal waste and livestock manure using anaerobic digestion and biogas combustion in a combined heat and power facility. Gasification coupled with a gas-turbine-based combined heat and power cycle is suggested as optimal. Integration of WtE technologies could yield 2.29 GWh of electricity and 3.55 GWh of useable waste heat annually, representing an annual exergy yield of 2.98 GWh. Within the Kočevje municipality, this amount of energy could cover 23.6% of the annual household electricity needs and cover the annual space and water heating requirements of 10.0% of households with district heating. Additionally, CO2-eq. emissions could be reduced by up to 20%, while further offsetting emissions associated with electricity and district heat generation by 1907 tons annually. These findings highlight the potential of WtE technologies to enhance municipal self-sustainability and reduce landfill waste. [ABSTRACT FROM AUTHOR]

The rapid advancement of engineering systems has spurred the search for innovative thermal management solutions. Boiling, as a phase‐change heat transfer method, has shown promise in heat dissipation, but non‐functionalized surfaces struggle with increasing cooling demands. To improve heat dissipation efficiency across different heat loads, functionalized surfaces with tailored wettability have been proposed. Separately, superhydrophilic and superhydrophobic surfaces each offer benefits and drawbacks in boiling applications but combining them on a single "biphilic" surface simultaneously harnesses their advantages. In this study, laser‐functionalized copper surfaces with spatially tailored wettability are developed by combining two‐step laser texturing with a self‐assembled monolayer coating, while focus is placed on the impact of the size and pitch of superhydrophobic spots. The developed functionalized surfaces exhibit exceptional boiling performance with heat transfer coefficients up to 299 kW m−2 K−1, a 434% enhancement over untreated surfaces. Optimal ratios of superhydrophilic and superhydrophobic areas and optimal spot pitch are identified. Additionally, varying behavior at different heat flux levels is observed, emphasizing the importance of considering thermal loads when determining the optimal surface pattern. This advancement in performance, along with the rapid and cost‐effective functionalization process, represents a significant breakthrough for enhanced thermal management applications. [ABSTRACT FROM AUTHOR]

Heat transfer coefficient (HTC) was experimentally measured for saturated and subcooled pool boiling of binary mixtures of water and glycerin. Saturated boiling was studied for mixtures with water mass fractions ω w from 100 % to 60 % on horizontal flat nickel-plated surfaces at heat fluxes from 50 to 650 k W m − 2 at atmospheric pressure. Subcooled boiling was investigated in the range of subcooling from 0 to 30 K at heat fluxes of approximately 250, 450 and 650 k W m − 2 . It was found that mixture effects have a significant impact on saturated boiling HTC even for mixtures with very low content of glycerin as significant drops of HTC were observed for subtle changes in composition for mixtures of high ω w . Measured HTC was successfully correlated with the combination of Yagov (1999) and Inoue and Monde (2009) correlations with a mean relative error of 12 %. A simple empirical HTC correlation is also proposed. For subcooled boiling, developed subcooled boiling regime was reached for all investigated heat fluxes. For this regime, correlations, which were able to predict HTC for saturated boiling, were employed to predict subcooled boiling HTCs for all investigated concentrations, heat fluxes and subcoolings. Effect of subcooling and effect of liquid composition on total HTC were of the same importance for mixtures with higher water content. With the increase in concentration of glycerin in the mixture, decrease in total HTC with increasing subcooling became more significant. [ABSTRACT FROM AUTHOR]

The enhancement of boiling heat transfer has been extensively shown to be achievable through surface texturing or fluid property modification, yet few studies have investigated the possibility of coupling both enhancement approaches. The present work focuses on exploring the possibility of concomitant enhancement of pool boiling heat transfer by using TiO2-water nanofluid in combination with laser-textured copper surfaces. Two mass concentrations of 0.001 wt.% and 0.1 wt.% are used, along with two nanoparticle sizes of 4–8 nm and 490 nm. Nanofluids are prepared using sonification and degassed distilled water, while the boiling experiments are performed at atmospheric pressure. The results demonstrate that the heat transfer coefficient (HTC) using nanofluids is deteriorated compared to using pure water on the reference and laser-textured surface. However, the critical heat flux (CHF) is significantly improved at 0.1 wt.% nanoparticle concentration. The buildup of a highly wettable TiO2 layer on the surface is identified as the main reason for the observed performance. Multiple subsequent boiling experiments using nanofluids on the same surface exhibited a notable shift in boiling curves and their instability at higher concentrations, which is attributable to growth of the nanoparticle layer on the surface. Overall, the combination of nanofluids boiling on a laser-textured surface proved to enhance the CHF after prolonged exposure to highly concentrated nanofluid, while the HTC was universally and significantly decreased in all cases. [ABSTRACT FROM AUTHOR]

Summary: In recent years, the field of biomass gasification as a method of transforming biomass into a more useable gaseous fuel experienced expedited development since it represents a prominent way to achieve sustainability goals and targets set by the Paris accord and, more recently, the European Green Deal. The use of natural gas is projected to reduce with the transition toward exploitation of renewable gas, while a new area of hydrogen applications is also emerging. However, with uncertain production of current processes, and consumption patterns seen on the market, an opportunity for a new flexible process exists. This article investigates a concept process design of sorption‐enhanced gasification (SEG) based on calcium looping. Aspen Plus simulation software was used to develop and simulate the process models for flexible production of bio‐SNG or bio‐H2. The process parameters can be manipulated to either achieve a high‐purity bio‐H2 (>96 mol%) or high‐purity bio‐SNG (>95 mol%), as well as any other combination of the two main products. The concept process is based on a low‐pressure, low‐temperature dual‐fluidized bed reactor with steam as a gasifying agent and an additional downstream Sabatier process reactor to achieve high CH4 contents. The simulated process achieves process efficiency of up to 62.2%LHV and 78.0%LHV for H2 and CH4 production, respectively, with production yields reaching 0.112 kg H2/kg BM and 0.23 kg CH4/kg BM. These values were validated and benchmarked against comparable process designs, and the performance of the proposed process was found to be on par or superior. Overall, the proposed process design exhibits clear benefits of calcium looping gasification, with high process efficiency, negligible NOx, SO2, and H2S content, and high flexibility. Therefore, the proposed process addressed and successfully solved some of the key challenges of achieving viability of a gasification plant on a commercial scale. [ABSTRACT FROM AUTHOR]