Search

This article aims to evaluate the performance of solar radiation forecasts produced by CMA-WSP v2.0 (version 2 of the China Meteorological Administration Wind and Solar Energy Prediction System) and to explore the application of machine learning algorithms from the scikit-learn Python library to improve the solar radiation prediction made by the CMA-WSP v2.0. It is found that the performance of the solar radiation forecasting from the CMA-WSP v2.0 is closely related to the weather conditions, with notable diurnal fluctuations. The mean absolute percentage error (MAPE) produced by the CMA-WSP v2.0 is approximately 74% between 11:00 and 13:00. However, the MAPE ranges from 193% to 242% at 07:00–08:00 and 17:00–18:00, which is greater than that observed at other daytime periods. The MAPE is relatively low (high) for both sunny and cloudy (overcast and rainy) conditions, with a high probability of an absolute percentage error below 25% (above 100%). The forecasts tend to underestimate (overestimate) the observed solar radiation in sunny and cloudy (overcast and rainy) conditions. By applying machine learning models (such as linear regression, decision trees, K-nearest neighbors, random forests regression, adaptive boosting, and gradient boosting regression) to revise the solar radiation forecasts, the MAPE produced by the CMA-WSP v2.0 is significantly reduced. The reduction in the MAPE is closely connected to the weather conditions. The models of K-nearest neighbors, random forests regression, and decision trees can reduce the MAPE in all weather conditions. The K-nearest neighbor model exhibits the most optimal performance among these models, particularly in rainy conditions. The random forest regression model demonstrates the second-best performance compared to that of the K-nearest neighbor model. The gradient boosting regression model has been observed to reduce the MAPE of the CMA-WSP v2.0 in all weather conditions except rainy. In contrast, the adaptive boosting (linear regression) model exhibited a diminished capacity to improve the CMA-WSP v2.0 solar radiation prediction, with a slight reduction in MAPE observed only in sunny (sunny and cloudy) conditions. In addition, the input feature selection has a considerable influence on the performance of the machine learning model. The incorporation of the time series data associated with the diurnal variation of solar radiation as an input feature can further improve the model's performance. [ABSTRACT FROM AUTHOR]

In this research, a new time-resolved emission inversion system was developed to investigate variations in SO2 emission in China during the COVID-19 (Corona Virus Disease 2019) lockdown period based on a four-dimensional variational (4DVar) inversion method to dynamically optimize the SO2 inventory by assimilating the ground-based hourly observation data. The inversion results obtained were validated in the North China Plain (NCP). Two sets of experiments were carried out based on the original and optimized inventories during the pre-lockdown and lockdown period to quantify the SO2 emission variations and the corresponding prediction improvement. The SO2 emission changes due to the lockdown in the NCP were quantified by the differences in the averaged optimized inventories between the pre-lockdown and lockdown period. As a response to the lockdown control, the SO2 emissions were reduced by 20.1% on average in the NCP, with ratios of 20.7% in Beijing, 20.2% in Tianjin, 26.1% in Hebei, 18.3% in Shanxi, 19.1% in Shandong, and 25.9% in Henan, respectively. These were mainly attributed to the changes caused by the heavy industry lockdown in these areas. Compared to the model performance based on the original inventory, the optimized daily SO2 emission inventory significantly improved the model SO2 predictions during the lockdown period, with the correlation coefficient (R) value increasing from 0.28 to 0.79 and the root-mean-square error (RMSE) being reduced by more than 30%. Correspondingly, the performance of PM2.5 was slightly improved, with R-value increasing from 0.67 to 0.74 and the RMSE being reduced by 8% in the meantime. These statistics indicate the good optimization ability of the time-resolved emission inversion system. [ABSTRACT FROM AUTHOR]

The role of PM 2.5 (particles with aerodynamic diameters ≤ 2.5 µm) deposition in air quality changes over China remains unclear. By using the three-year (2013, 2015, and 2017) simulation results of the WRF/CUACE v1.0 model from a previous work (Zhang et al., 2021), a non-linear relationship between the deposition of PM 2.5 and anthropogenic emissions over central-eastern China in cold seasons as well as in different life stages of haze events was unraveled. PM 2.5 deposition is spatially distributed differently from PM 2.5 concentrations and anthropogenic emissions over China. The North China Plain (NCP) is typically characterized by higher anthropogenic emissions compared to southern China, such as the middle-low reaches of Yangtze River (MLYR), which includes parts of the Yangtze River Delta and the Midwest. However, PM 2.5 deposition in the NCP is significantly lower than that in the MLYR region, suggesting that in addition to meteorology and emissions, lower deposition is another important factor in the increase in haze levels. Regional transport of pollution in central-eastern China acts as a moderator of pollution levels in different regions, for example by bringing pollution from the NCP to the MLYR region in cold seasons. It was found that in typical haze events the deposition flux of PM 2.5 during the removal stages is substantially higher than that in accumulation stages, with most of the PM 2.5 being transported southward and deposited to the MLYR and Sichuan Basin region, corresponding to a latitude range of about 24°N-31°N., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this article., (Copyright © 2022. Published by Elsevier B.V.)

The impact of Arctic Oscillation (AO) anomalies on winter PM 2.5 variability in China was investigated using a numerical modeling system (WRF-CUACE). The model results showed that the influence of AO anomalies on winter PM 2.5 concentration was mainly concentrated in eastern China, especially in Central China (CEN), Beijing-Tianjin-Hebei (BTH), the Yangtze River Delta (YRD), and Pearl River Delta (PRD) and was mostly consistent with the conclusions of a previous analysis using haze data. Winter PM 2.5 concentrations in CEN and BTH increased under abnormally high AO and decreased under abnormally low AO due to the subsequent changes in specific meteorological conditions, such as temperature, wind speed, and boundary layer height. Winter PM 2.5 decreased in the YRD and PRD in both abnormally high and low AO years due to more favorable vertical transport conditions and regional transport capacity compared with those of other regions. In addition to meteorological factors, AO anomalies also impacted PM 2.5 depositions in winter, with more apparent effects in southern China. It is found that AO had a larger impact on dry deposition than on wet deposition, and dry deposition was a dominant factor affecting PM 2.5 concentrations in CEN., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

As part of the Energy Golden Triangle in northwest China and the largest coal-to-liquids industry in the world, the emission and contamination of fine particles in the Ningdong National Energy and Chemical Industrial Base (NECIB) are unknown. There are also large knowledge gaps in the association of air pollution with coal-to-liquids industry. This paper reports the chemical composition and source apportionment of PM 1 and PM 2.5 collected at two industrial sites Yinglite (YLT) and Baofeng (BF) from a field campaign during summer 2016 and winter 2017. Major chemical components in PM 1 and PM 2.5 , including carbonaceous aerosols, water-soluble inorganic ions, and metal elements were analyzed. The Positive Matrix Factorization (PMF) model and the ISORROPIA II thermodynamic equilibrium model were used to track possible sources and contributions of these chemical components to the formation of the two fine particles. The results identified four primary sources of the fine particles, including vehicle emissions, biomass burning and waste incineration, the secondary aerosols and coal combustion, and soil dust. The PM 1 and PM 2.5 concentrations were higher in winter than summer. The summed secondary inorganic and carbonaceous aerosols accounted for 36.1-40.0% of PM 2.5 mass. The total mass of chemical components identified in the source apportionment only explained about 64.2 to 72.4% of the PM 2.5 mass. These results imply some missing sources in this large-scale coal chemical industry base. A coupled weather forecasting and atmospheric chemistry model WRF-Chem was employed to simulate the PM 2.5 mass and concentrations of OC and EC, and to examine the origins of PM 2.5 across the NECIB. The modeled concentrations of OC and EC were consistent with the sampled data, but the modeled mass of PM 2.5 is lower considerably than the measurements, again suggesting unknown sources of fine particles in this energy industrial base., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The North China Plain (NCP) has experienced heavy air pollution in the past several decades featured by high levels of fine particulate matter (PM 2.5 ). PM 2.5 removal from the atmosphere in the NCP by dry deposition was estimated from 1999 through 2013 using the inferential method, which combined PM 2.5 air concentrations retrieved from satellite remote sensing and dry deposition velocities (V d ) calculated using a bulk particle dry deposition model. Dry deposition of the three major inorganic ions in PM 2.5 , namely NH 4 + (ammonium), NO 3 - (nitrate), and SO 4 2- (sulfate), with their concentrations in 2000 and 2010 obtained from WRF-Chem model simulations, were also investigated considering their important roles in PM 2.5 formation and ecosystem health. High levels of modeled and satellite-retrieved PM 2.5 air concentrations, the secondary inorganic aerosols (the sum of NH 4 + , NO 3 - , and SO 4 2- ), and their respective deposition fluxes were identified from the southern NCP to Beijing-Tianjin metropolitans. The deposition fluxes derived from the inferential method and WRF-Chem increased considerably in the 2000s due to rising PM 2.5 atmospheric levels across the NCP. The enhancement of dry deposition velocities of PM 2.5 and three aerosol species in the NCP were associated nicely with increasing vegetation coverage and wind speed. We show that both air concentrations of PM 2.5 and secondary inorganic aerosols and rising dry deposition velocities related to extensive afforestation activities contributed to their deposition fluxes and an inclining trend of PM 2.5 removal from the atmosphere., (Copyright © 2018 Elsevier B.V. All rights reserved.)