Search

Since an ion-beam is a viable attractive alternative to other material surface patterning techniques like an electron-beam, a study of the structure, composition and dimension of patterned lines created on surfaces of Si and SrTiO3 wafers with a Ga ion-beam was carried out. A combination of top-view SEM and cross-sectional STEM imaging and EDX spectroscopy applied to the patterned lines showed that the total ion-dose (DI) is the key parameter affecting the characteristics of the patterned lines, which can be adjusted by the degree of overlap between adjacent spots, beam dwell time at each spot, and the number of beam-passes for every beam size and current. A strong dependence between the used ion-doses and the patterned lines sizes was observed and quantified. At higher ion-doses (DI > 10^15 ions/cm^2), the Ga ions remove part of the material in the exposed area creating channels surrounded with amorphized regions whereas, at lower ion-doses only amorphization occurs, creating a ridge on the wafer surface. Further, to pattern lines with similar sizes, an order of magnitude different ion-doses might be required in different materials as was the case with Si and SrTiO3. The quantification of line sizes showed that with this approach, lines as fine as 10 nm can be reproducibly patterned and characterized on the surfaces of materials, when low ion-doses are used, typically in the range of 10^14-10^15 ions/cm^2.

Exploration and advancements in ultra-wide bandgap (UWBG) semiconductors are pivotal for next-generation high-power electronics and deep-ultraviolet (DUV) optoelectronics. A critical challenge lies in finding a semiconductor that is highly transparent to DUV wavelengths yet conductive with high mobility at room temperature. Here, we achieved both high transparency and high conductivity by employing a thin heterostructure design. The heterostructure facilitated high conductivity by screening phonons using free carriers, while the atomically thin films ensured high transparency. We utilized a heterostructure comprising SrSnO3/La:SrSnO3/GdScO3 (110) and applied electrostatic gating to effectively separate electrons from their dopant atoms. This led to a modulation of carrier density from 1018 cm-3 to 1020 cm-3, with room temperature mobilities ranging from 40 to 140 cm2V-1s-1. The phonon-limited mobility, calculated from first principles, closely matched experimental results, suggesting that room-temperature mobility could be further increased with higher electron density. Additionally, the sample exhibited 85% optical transparency at a 300 nm wavelength. These findings highlight the potential of heterostructure design for transparent UWBG semiconductor applications, especially in deep-ultraviolet regime., Comment: 32 pages

We use a concerted theory-experiment effort to investigate the formation of chiral real space spin texture when the archetypal Dirac semimetal Cd$_3$As$_2$ is interfaced with In$_{1-x}$Mn$_x$As, a ferromagnetic semiconductor with perpendicular magnetic anisotropy. Our calculations reveal a nonzero off-diagonal spin susceptibility in the Cd$_3$As$_2$ layer due to the Rashba spin-orbit coupling from broken inversion symmetry. This implies the presence of a Dzyaloshinskii-Moriya interaction between local moments in the In$_{1-x}$Mn$_x$As layer, mediated by Dirac electrons in the vicinal Cd$_3$As$_2$ layer, potentially creating the conditions for a real space chiral spin texture. Using electrical magnetoresistance measurements at low temperature, we observe an emergent excess contribution to the transverse magneto-resistance whose behavior is consistent with a topological Hall effect arising from the formation of an interfacial chiral spin texture. This excess Hall voltage varies with gate voltage, indicating a promising electrostatically-tunable platform for understanding the interplay between the helical momentum space states of a Dirac semimetal and chiral real space spin textures in a ferromagnet.

Plan-view transmission electron microscopy (TEM) samples are key to understand the atomic structure and associated properties of materials along their growth orientation, especially for thin films that are stain-engineered onto different substrates for property tuning. In this work, we present a method to prepare high-quality plan-view samples for analytical STEM study from thin-films using a dual-beam focused ion beam scanning electron microscope (FIB-SEM) system. The samples were prepared from thin films of perovskite oxides and metal oxides ranging from 20-80 nm thicknesses, grown on different substrates using molecular beam epitaxy. A site-specific sample preparation from the area of interest is described, which includes sample attachment and thinning techniques to minimize damage to the final TEM samples. While optimized for the thin film-like geometry, this method can be extended to other site-specific plan-view samples from bulk materials. Aberration-corrected scanning (S)TEM was used to access the quality of the thin film in each sample. This enabled direct visualization of line defects in perovskite BaSnO3 and Ir particle formation and texturing in IrO2 films.

Bulk-boundary correspondence is a foundational principle underlying the electronic band structure and physical behavior of topological quantum materials. Although it has been rigorously tested in topological systems where the physical properties involve charge currents, it remains unclear whether bulk-boundary correspondence should also hold for non-conserved spin currents. We study charge-to-spin conversion in a canonical topological insulator, Bi$_{1-x}$Sb$_x$, to address this fundamentally unresolved question. We use spin-torque ferromagnetic resonance measurements to accurately probe the charge-to-spin conversion efficiency in epitaxial Bi$_{1-x}$Sb$_x$~thin films of high structural quality spanning the entire range of composition, including both trivial and topological band structures, as verified using {\it in vacuo} angle-resolved photoemission spectroscopy. From these measurements, we deduce the effective spin Hall conductivity (SHC) and find excellent agreement with the values predicted by tight-binding calculations for the intrinsic SHC of the bulk bands. These results provide strong evidence that the strong spin-orbit entanglement of bulk states well below the Fermi energy connects directly to the SHC in epitaxial Bi$_{1-x}$Sb$_x$~films interfaced with a metallic ferromagnet. The excellent agreement between theory and experiment points to the generic value of analyses focused entirely on bulk properties, even for topological systems involving non-conserved spin currents.

We report the molecular beam epitaxy of Bi_1-xSb_x thin films ($0 \leq x \leq 1$) on (0001) sapphire substrates using a thin (Bi,Sb)$_2$Te$_3$ buffer layer. Characterization of the films using reflection high energy diffraction, x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy reveals epitaxial growth of films of reasonable structural quality. This is further confirmed via x-ray diffraction pole figures that determine the epitaxial registry between the thin film and substrate. We further investigate the microscopic structure of thin films via Raman spectroscopy, demonstrating how the vibrational modes vary as the composition changes and discussing the implications for the crystal structure. We also characterize the samples using electrical transport measurements.

The advancement in thin-film exfoliation for synthesizing oxide membranes has opened up new possibilities for creating artificially-assembled heterostructures with structurally and chemically incompatible materials. The sacrificial layer method is a promising approach to exfoliate as-grown films from a compatible material system, allowing their integration with dissimilar materials. Nonetheless, the conventional sacrificial layers often possess intricate stoichiometry, thereby constraining their practicality and adaptability, particularly when considering techniques like Molecular Beam Epitaxy (MBE). This is where easy-to-grow binary alkaline earth metal oxides with a rock salt crystal structure are useful. These oxides, which include (Mg, Ca, Sr, Ba)O, can be used as a sacrificial layer covering a much broader range of lattice parameters compared to conventional sacrificial layers and are easily dissolvable in deionized water. In this study, we show the epitaxial growth of single-crystalline perovskite SrTiO3 (STO) on sacrificial layers consisting of crystalline SrO, BaO, and Ba1-xCaxO films, employing a hybrid MBE method. Our results highlight the rapid (< 5 minutes) dissolution of the sacrificial layer when immersed in deionized water, facilitating the fabrication of millimeter-sized STO membranes. Using high-resolution x-ray diffraction, atomic-force microscopy, scanning transmission electron microscopy, impedance spectroscopy, and scattering-type near-field optical microscopy (SNOM), we demonstrate epitaxial STO membranes with bulk-like intrinsic dielectric properties. The employment of alkaline earth metal oxides as sacrificial layers is likely to simplify membrane synthesis, particularly with MBE, thus expanding research possibilities., Comment: 36 pages, 4 figures

Contrary to topological insulators, topological semimetals possess a nontrivial chiral anomaly that leads to negative magnetoresistance and are hosts to both conductive bulk states and topological surface states with intriguing transport properties for spintronics. Here, we fabricate highly-ordered metallic Pt3Sn and Pt3SnxFe1-x thin films via sputtering technology. Systematic angular dependence (both in-plane and out-of-plane) study of magnetoresistance presents surprisingly robust quadratic and linear negative longitudinal magnetoresistance features for Pt3Sn and Pt3SnxFe1-x, respectively. We attribute the anomalous negative longitudinal magnetoresistance to the type-II Dirac semimetal phase (pristine Pt3Sn) and/or the formation of tunable Weyl semimetal phases through symmetry breaking processes, such as magnetic-atom doping, as confirmed by first-principles calculations. Furthermore, Pt3Sn and Pt3SnxFe1-x show the promising performance for facilitating the development of advanced spin-orbit torque devices. These results extend our understanding of chiral anomaly of topological semimetals and can pave the way for exploring novel topological materials for spintronic devices., Comment: 13 pages, 4 figures

We report the synthesis and characterization of thin films of the Weyl semimetal NbAs grown on GaAs (100) and GaAs (111)B substrates. By choosing the appropriate substrate, we can stabilize the growth of NbAs in the (001) and (100) directions. We combine x-ray characterization with high-angle annular dark field scanning transmission electron microscopy to understand both the macroscopic and microscopic structure of the NbAs thin films. We show that these films are textured with domains that are tens of nanometers in size and that, on a macroscopic scale, are mostly aligned to a single crystalline direction. Finally, we describe electrical transport measurements that reveal similar behavior in films grown in both crystalline directions, namely carrier densities of $\sim 10^{21} - 10^{22} $

Restructuring of rutile TiO$_{2}$ under electron beam irradiation driven by radiolysis was observed and analyzed using a combination of atomic-resolution imaging and electron energy loss spectroscopy (EELS) in scanning transmission electron microscopy (STEM). It was determined that a high-energy (80-300 keV) electron beam at high doses ($\gtrapprox 10^7 \ e/nm^2$) can constructively restructure rutile TiO$_{2}$ with an efficiency of $6\times 10^{-6}$. These observations were realized using rutile TiO$_{2}$ samples with atomically sharp nanometer-wide cracks. Based on atomic-resolution STEM imaging and quantitative EELS analysis, we propose a $"$ 2-step $"$ rolling model of the octahedral building blocks of the crystal to account for observed radiolysis-driven atomic migration., Comment: 15 pages with 5 figures

Ruddlesden-Popper (RP) oxides (A$_{n+1}$B$_n$O$_{3n+1}$) comprised of perovskite (ABO$_3$)$_n$ slabs can host a wider variety of structural distortions than their perovskite counterparts. This makes accurate structural determination of RP oxides more challenging. In this study, we investigate the structural phase diagram of $n=1$ RP Sr$_2$SnO$_4$, one of alkaline earth stannates that are promising for opto-electronic applications by using group theory-based symmetry analysis and first-principles calculations. We explore the symmetry breaking effects of different dynamical instabilities, predict the energies of phases they lead to, and take into account different (biaxial strain and hydrostatic pressure) boundary conditions. We also address the effect of structural changes on the electronic structure and find that compressive biaxial strain drives Sr$_2$SnO$_4$ into a regime with wider bandgap and lower electron effective mass.

In the course of searching for promising topological materials for applications in future topological electronics, we evaluated spin-orbit torques (SOTs) in high-quality sputtered ${\delta}-$TaN/Co20Fe60B20 devices through spin-torque ferromagnetic resonance ST-FMR and spin pumping measurements. From the ST-FMR characterization we observed a significant linewidth modulation in the magnetic Co20Fe60B20 layer attributed to the charge-to-spin conversion generated from the ${\delta}-$TaN layer. Remarkably, the spin-torque efficiency determined from ST-FMR and spin pumping measurements is as large as ${\Theta} =$ 0.034 and 0.031, respectively. These values are over two times larger than for ${\alpha}-$Ta, but almost five times lower than for ${\beta}-$Ta, which can be attributed to the low room temperature electrical resistivity $\sim 74{\mu}{\Omega}$ cm in ${\delta}-$TaN. A large spin diffusion length of at least $\sim8$ nm is estimated, which is comparable to the spin diffusion length in pure Ta. Comprehensive experimental analysis, together with density functional theory calculations, indicates that the origin of the pronounced SOT effect in ${\delta}-$TaN can be mostly related to a significant contribution from the Berry curvature associated with the presence of a topically nontrivial electronic band structure in the vicinity of the Fermi level (EF). Through additional detailed theoretical analysis, we also found that an isostructural allotrope of the superconducting ${\delta}-$TaN phase, the simple hexagonal structure, ${\theta}-$TaN, has larger Berry curvature, and that, together with expected reasonable charge conductivity, it can also be a promising candidate for exploring a generation of spin-orbit torque magnetic random access memory as cheap, temperature stable, and highly efficient spin current sources., Comment: 28 pages, 7 figures

Layered black arsenic (b-As) has recently emerged as a new anisotropic two-dimensional (2D) semiconducting material with applications in electronic devices. Understanding factors affecting the ambient stability of this material remains crucial for its applications. Herein we use first-principles density functional theory (DFT) calculations to examine the stability of the (010) and (101) surfaces of b-As in the presence of oxygen (O2) and water (H2O). We show that the (101) surface of b-As can easily oxidize in presence of O2. In the presence of moisture contained in air, the oxidized b-As surfaces favorably react with H2O molecules to volatilize As in the form of As(OH)3 and AsO(OH), which results in the degradation of the b-As surface, predominantly across the (101) surface. These predictions are in good agreement with experimental electron microscopy observations, thus demonstrating the co-operative reactivity of O2 and H2O in the degradation of layered b-As under ambient conditions.

We report the measurement of efficient charge-to-spin conversion at room temperature in Weyl semimetal/ferromagnet heterostructures with both oxidized and pristine interfaces. Polycrystalline films of the Weyl semimetal, TaAs, are grown by molecular beam epitaxy on (001) GaAs and interfaced with a metallic ferromagnet (Ni$_{0.8}$Fe$_{0.2}$). Spin torque ferromagnetic resonance (ST-FMR) measurements in samples with an oxidized interface yield a spin torque efficiency as large as $\xi_{\mathrm{FMR}}=0.45\pm 0.25$ for a 8 nm Ni$_{0.8}$Fe$_{0.2}$ layer thickness. By studying ST-FMR in these samples with varying Ni$_{0.8}$Fe$_{0.2}$ layer thickness, we extract a damping-like torque efficiency as high as $\xi_{\mathrm{DL}}=1.36\pm 0.66$. In samples with a pristine (unoxidized) interface, the spin torque efficiency has opposite sign to that observed in oxidized samples ($\xi_{\mathrm{FMR}}=-0.27\pm 0.14$ for a 5 nm Ni$_{0.8}$Fe$_{0.2}$ layer thickness). We also find a lower bound on the spin Hall conductivity ($424 \pm 110 \frac{\hbar}{e}$ S/cm) which is surprisingly consistent with theoretical predictions for the single crystal Weyl semimetal state of TaAs.

Electrical manipulation of spin textures inside antiferromagnets represents a new opportunity for developing spintronics with superior speed and high device density. Injecting spin currents into antiferromagnets and realizing efficient spin-orbit-torque-induced switching is however still challenging due to the complicated interactions from different sublattices. Meanwhile, because of the diminishing magnetic susceptibility, the nature and the magnitude of current-induced magnetic dynamics remain poorly characterized in antiferromagnets, whereas spurious effects further complicate experimental interpretations. In this work, by growing a thin film antiferromagnetic insulator, {\alpha}-Fe2O3, along its non-basal plane orientation, we realize a configuration where an injected spin current can robustly rotate the N\'eel vector within the tilted easy plane, with an efficiency comparable to that of classical ferromagnets. The spin-orbit torque effect stands out among other competing mechanisms and leads to clear switching dynamics. Thanks to this new mechanism, in contrast to the usually employed orthogonal switching geometry, we achieve bipolar antiferromagnetic switching by applying positive and negative currents along the same channel, a geometry that is more practical for device applications. By enabling efficient spin-orbit torque control on the antiferromagnetic ordering, the tilted easy plane geometry introduces a new platform for quantitatively understanding switching and oscillation dynamics in antiferromagnets., Comment: 21 pages, 5 figures

Magnetic doping of topological quantum materials provides an attractive route for studying the effects of time-reversal symmetry breaking. Thus motivated, we explore the introduction of the transition metal Mn into thin films of the Dirac semimetal Cd3As2 during growth by molecular beam epitaxy. Scanning transmission electron microscopy measurements show the formation of a Mn-rich phase at the top surface of Mn-doped Cd3As2 thin films grown using both uniform doping and delta doping. This suggests that Mn acts as a surfactant during epitaxial growth of Cd3As2, resulting in phase separation. Magnetometry measurements of such samples indicate a ferromagnetic phase with out-of-plane magnetic anisotropy. Electrical magneto-transport measurements of these films as a function of temperature, magnetic field, and chemical potential reveal a lower carrier density and higher electron mobility compared to pristine Cd3As2 films grown under similar conditions. This suggests that the surfactant effect might also serve to getter impurities. We observe robust quantum transport (Shubnikov-de Haas oscillations and an incipient integer quantum Hall effect) in very thin (7 nm) Cd3As2 films despite being in direct contact with a structurally disordered surface ferromagnetic overlayer.

Cobalt oxides have long been understood to display intriguing phenomena known as spin-state crossovers, where the cobalt ion spin changes vs. temperature, pressure, etc. A very different situation was recently uncovered in praseodymium-containing cobalt oxides, where a first-order coupled spin-state/structural/metal-insulator transition occurs, driven by a remarkable praseodymium valence transition. Such valence transitions, particularly when triggering spin-state and metal-insulator transitions, offer highly appealing functionality, but have thus far been confined to cryogenic temperatures in bulk materials (e.g., 90 K in Pr1-xCaxCoO3). Here, we show that in thin films of the complex perovskite (Pr1-yYy)1-xCaxCoO3-{\delta}, heteroepitaxial strain tuning enables stabilization of valence-driven spin-state/structural/metal-insulator transitions to at least 291 K, i.e., around room temperature. The technological implications of this result are accompanied by fundamental prospects, as complete strain control of the electronic ground state is demonstrated, from ferromagnetic metal under tension to nonmagnetic insulator under compression, thereby exposing a potential novel quantum critical point., Comment: 35 pages, 7 figures

The rapid discovery of two-dimensional (2D) van der Waals (vdW) quantum materials has led to heterostructures that integrate diverse quantum functionalities such as topological phases, magnetism, and superconductivity. In this context, the epitaxial synthesis of vdW heterostructures with well-controlled interfaces is an attractive route towards wafer-scale platforms for systematically exploring fundamental properties and fashioning proof-of-concept devices. Here, we use molecular beam epitaxy to synthesize a vdW heterostructure that interfaces two material systems of contemporary interest: a 2D ferromagnet (1T-CrTe2) and a topological semimetal (ZrTe2). We find that one unit-cell (u.c.) thick 1T-CrTe2 grown epitaxially on ZrTe2 is a 2D ferromagnet with a clear anomalous Hall effect. In thicker samples (12 u.c. thick CrTe2), the anomalous Hall effect has characteristics that may arise from real-space Berry curvature. Finally, in ultrathin CrTe2 (3 u.c. thickness), we demonstrate current-driven magnetization switching in a full vdW topological semimetal/2D ferromagnet heterostructure device., Comment: Includes new data (ST-FMR) and calculations (spin Hall conductivity)

A seemingly simple oxide with a rutile structure, RuO2 has been shown to possess several intriguing properties ranging from strain-stabilized superconductivity to a strong catalytic activity. Much interest has arisen surrounding the controlled synthesis of RuO2 films but, unfortunately, utilizing atomically-controlled deposition techniques like molecular beam epitaxy (MBE) has been difficult due to the ultra-low vapor pressure and low oxidation potential of Ru. Here, we demonstrate the growth of epitaxial, single-crystalline RuO2 films on different substrate orientations using the novel solid-source metal-organic (MO) MBE. This approach circumvents these issues by supplying Ru using a pre-oxidized solid metal-organic precursor containing Ru. High-quality epitaxial RuO2 films with bulk-like room-temperature resistivity of 55 micro-ohm-cm were obtained at a substrate temperature as low as 300 C. By combining X-ray diffraction, transmission electron microscopy, and electrical measurements, we discuss the effect of substrate temperature, orientation, film thickness, and strain on the structure and electrical properties of these films. Our results illustrating the use of novel solid-source MOMBE approach paves the way to the atomic-layer controlled synthesis of complex oxides of stubborn metals, which are not only difficult to evaporate but also hard to oxidize., Comment: 21 pages including 6 figures

Distinct dopant behaviors inside and outside dislocation cores are identified by atomic-resolution electron microscopy in perovskite BaSnO3 with considerable consequences on local atomic and electronic structures. Driven by elastic strain, when A-site designated La dopants segregate near a dislocation core, the dopant atoms accumulate at the Ba sites in compressively strained regions. This triggers formation of Ba-vacancies adjacent to the core atomic sites resulting in reconstruction of the core. Notwithstanding the presence of extremely large tensile strain fields, when La atoms segregate inside the dislocation core, they become B-site dopants, replacing Sn atoms and compensating the positive charge of the core oxygen vacancies. Electron energy-loss spectroscopy shows that the local electronic structure of these dislocations changes dramatically due to the segregation of the dopants inside and around the core ranging from formation of strong La-O hybridized electronic states near the conduction band minimum to insulator-to-metal transition.

We report spin-to-charge and charge-to-spin conversion at room temperature in heterostructure devices that interface an archetypal Dirac semimetal, Cd3As2, with a metallic ferromagnet, Ni0.80Fe0.20 (permalloy). The spin-charge interconversion is detected by both spin torque ferromagnetic resonance and ferromagnetic resonance driven spin pumping. Analysis of the symmetric and anti-symmetric components of the mixing voltage in spin torque ferromagnetic resonance and the frequency and power dependence of the spin pumping signal show that the behavior of these processes is consistent with previously reported spin-charge interconversion mechanisms in heavy metals, topological insulators, and Weyl semimetals. We find that the efficiency of spin-charge interconversion in Cd3As2/permalloy bilayers can be comparable to that in heavy metals. We discuss the underlying mechanisms by comparing our results with first principles calculations.

We describe a novel approach for the rational design and synthesis of self-assembled periodic nanostructures using martensitic phase transformations. We demonstrate this approach in a thin film of perovskite SrSnO3 with reconfigurable periodic nanostructures consisting of regularly spaced regions of sharply contrasted dielectric properties. The films can be designed to have different periodicities and relative phase fractions via chemical doping or strain engineering. The dielectric contrast within a single film can be tuned using temperature and laser wavelength, effectively creating a variable photonic crystal. Our results show the realistic possibility of designing large-area self-assembled periodic structures using martensitic phase transformations with the potential of implementing "built-to-order" nanostructures for tailored optoelectronic functionalities., Comment: 13 pages, 5 figures

Black arsenic (BAs) is a van der Waals layered material with a puckered honeycomb structure and has received increased interest due to its anisotropic properties and promising performance in devices. Here, crystalline structure, thickness-dependent dielectric responses, and ambient stability of BAs nanosheets are investigated using STEM imaging and spectroscopy. Atomic-resolution HAADF-STEM images directly visualize the three-dimensional structure and evaluate the degree of anisotropy. STEM-EELS is used to measure the dielectric response of BAs as a function of the number of layers. Finally, BAs degradation under different ambient environments is studied highlighting high sensitivity to moisture in the air., Comment: 26 pages, 5 figures

We present a multi-region extension of standard power-law background subtraction for core-level EEL spectra to improve the robustness of background removal. This method takes advantage of the post-edge shape of core-loss EEL edges to enable simultaneous and co-dependent fitting of pre- and post-edge background regions. This method also produces simultaneous and consistent background removal from multiple edges in a single EEL spectrum. The stability of this method with respect to the fitting energy window is also discussed., Comment: 4 figures

A study of the STEM probe channeling in a heterostructures crystalline specimen is presented here with a goal to guide appropriate STEM-based characterization for complex structures. STEM analysis of perovskite BaSnO3/LaAlO3 bilayers is performed and the dominating effects of beam channeling on HAADF- and LAADF-STEM are illustrated. To study the electron beam propagating through BaSnO3/LaAlO3 bilayers, probe intensity depth profiles are calculated, and the effects of probe defocus and atomic column alignment are discussed. Characteristics of the beam channeling are correlated to resulting ADF-STEM images, which is then tested by comparing focal series of plan-view HAADF-STEM images to those recorded experimentally. Additionally, discussions on how to visualize the misfit dislocation network at the BaSnO3/LaAlO3 interface using HAADF- and LAADF-STEM images are provided., Comment: 23 pages, 8 figures

Through a combination of thin film growth, hard X-ray photoelectron spectroscopy (HAXPES), scanning transmission electron microscopy/electron energy loss spectroscopy (STEM/EELS), magneto-transport measurements, and transport modeling, we report on the demonstration of modulation-doping of BaSnO3 (BSO) using a wider bandgap La-doped SrSnO3 (LSSO) layer. Hard X-ray photoelectron spectroscopy (HAXPES) revealed a valence band offset of 0.71 +/- 0.02 eV between LSSO and BSO resulting in a favorable conduction band offset for remote doping of BSO using LSSO. Nonlinear Hall effect of LSSO/BSO heterostructure confirmed two-channel conduction owing to electron transfer from LSSO to BSO and remained in good agreement with the results of self-consistent solution to one-dimensional Poisson and Schr\"odinger equations. Angle-dependent HAXPES measurements revealed a spatial distribution of electrons over 2-3 unit cells in BSO. These results bring perovskite oxides a step closer to room-temperature oxide electronics by establishing modulation-doping approaches in non-SrTiO3-based oxide heterostructure.

Topological insulator (TI) materials are exciting candidates for integration into next-generation memory and logic devices because of their potential for efficient, low-energy-consumption switching of magnetization. Specifically, the family of bismuth chalcogenides offers efficient spin-to-charge conversion because of its large spin-orbit coupling and spin-momentum locking of surface states. However, a major obstacle to realizing the promise of TIs is the thin-film materials' quality, which lags behind that of epitaxially grown semiconductors. In contrast to the latter systems, the Bi-chalcogenides form by van der Waals epitaxy, which allows them to successfully grow onto substrates with various degrees of lattice mismatch. This flexibility enables the integration of TIs into heterostructures with emerging materials, including two-dimensional materials. However, understanding and controlling local features and defects within the TI films is critical to achieving breakthrough device performance. Here, we report observations and modeling of large-scale structural defects in (Bi,Sb)$_2$Te$_3$ films grown onto hexagonal BN, highlighting unexpected symmetry-breaking rotations within the films and the coexistence of a second phase along grain boundaries. Using first-principles calculations, we show that these defects could have consequential impacts on the devices that rely on these TI films, and therefore they cannot be ignored.

Inspired by recent experimental sub-atomic measurements using analytical aberration-corrected scanning transmission electron microscopes (STEMs), we studied electron probe propagation in crystalline SrTiO$_3$ at the sub-atomic length scale. Here, we report the existence of sub-atomic channeling and the formation of a vortex beam at this scale. The results of beam propagation simulations, which are performed at various crystal temperatures and STEM probe convergence angles (10 to 50 mrad) and beam energies (80 to 300 keV), showed that reducing the ambient temperature can enhance the sub-atomic channeling and that STEM probe parameters can be used to control the vortex beams and adjust their intensity, speed, and area.

Two-dimensional molybdenum disulfide (MoS2) is an excellent channel material for ultra-thin field effect transistors. However, high contact resistance across the metal-MoS2 interface continues to limit its widespread realization. Here, using atomic-resolution analytical scanning transmission electron microscopy (STEM) together with first principle calculations, we show that this contact problem is a fundamental limitation from the bonding and interactions at the metal-MoS2 interface that cannot be solved by improved deposition engineering. STEM analysis in conjunction with theory shows that when MoS2 is in contact with Ti, a metal with a high affinity to form strong bonds with sulfur, there is a release of S from Mo along with the formation of small Ti/TixSy clusters. A destruction of the MoS2 layers and penetration of metal can also be expected. The design of true high-mobility metal-MoS2 contacts will require the optimal selection of the metal or alloy based on their bonding interactions with the MoS2 surface. This can be advanced by evaluation of binding energies with increasing the number of atoms within metal clusters.

We report the decomposition of La2-xSrxCuO4 into La2O3 and Cu nanoparticles in ultra-high vacuum, observed by in-situ heating experiments in a transmission electron microscope (TEM). The analysis of electron diffraction data reveals that the phase decomposition process starts at about 150 {\deg}C and is considerably expedited in the temperature range of 350-450 {\deg}C. Two major resultant solid phases are identified as metallic Cu and La2O3 by electron diffraction, simulation, and electron energy-loss spectroscopy (EELS) analyses. With the aid of calculations, La2O3 phases are further identified to be derivatives of a fluorite structure - fluorite, pyrochlore, and (distorted) bixbyite - characterized by different oxygen-vacancy order. Additionally, the bulk plasmon energy and the fine structures of the O K and La M4,5 EELS edges are reported for these structures, along with simulated O K X-ray absorption near-edge structure. The resultant Cu nanoparticles and La2O3 phases remain unchanged after cooling to room temperature., Comment: 17 pages, 4 figures, It is to be published in Phys. Rev. Mater

The spin-orbit torque (SOT) arising from materials with large spin-orbit coupling promises a path for ultra-low power and fast magnetic-based storage and computational devices. We investigated the SOT from magnetron-sputtered BixSe(1-x) thin films in BixSe(1-x)/CoFeB heterostructures by using a dc planar Hall method. Remarkably, the spin Hall angle (SHA) was found to be as large as 18.83, which is the largest ever reported at room temperature (RT). Moreover, switching of a perpendicular CoFeB multilayer using SOT from the BixSe(1-x) has been observed with the lowest-ever switching current density reported in a bilayer system: 2.3 * 105 A/cm2 at RT. The giant SHA, smooth surface, ease of growth of the films on silicon substrate, successful growth and switching of a perpendicular CoFeB multilayer on BixSe(1-x) film opens a path for use of BixSe(1-x) topological insulator (TI) material as a spin-current generator in SOT-based memory and logic devices., Comment: 14 pages, 3 figures

There has been growing interest in perovskite BaSnO3 due to its desirable properties for oxide electronic devices including high electron mobility at room temperature and optical transparency. As these electronic and optical properties originate largely from the electronic structure of the material, here the basic electronic structure of epitaxially-grown BaSnO3 films is studied using high-energy-resolution electron energy-loss spectroscopy in a transmission electron microscope and ab initio calculations. This study provides a detailed description of the dielectric function of BaSnO3, including the energies of bulk plasmon excitations and critical interband electronic transitions, the band structure and partial densities of states, the measured band gap, and more. To make the study representative of a variety of deposition methods, results from BaSnO3 films grown by both hybrid molecular beam epitaxy and high pressure oxygen sputter deposition are reported., Comment: 23 pages, 7 figures, 3 tables

Perovskite oxides form an eclectic class of materials owing to their structural flexibility in accommodating cations of different sizes and valences. They host well known point and planar defects, but so far no line defect has been identified other than dislocations. Using analytical scanning transmission electron microscopy (STEM) and ab initio calculations we have detected and characterized the atomic and electronic structures of a novel line defect in NdTiO3 perovskite. It appears in STEM images as a perovskite cell rotated by 45 degrees. It consists of self-organized Ti-O vacancy lines replaced by Nd columns surrounding a central Ti-O octahedral chain containing Ti4+ ions, as opposed to Ti3+ in the host. The distinct Ti valence in this line defect introduces the possibility of engineering exotic conducting properties in a single preferred direction and tailoring novel desirable functionalities in this Mott insulator., Comment: 24 pages, 5 figures

We report electrical measurements of the current-induced spin polarization of the surface current in topological insulator devices where contributions from bulk and surface conduction can be disen- tangled by electrical gating. The devices use a ferromagnetic tunnel junction (permalloy/Al2O3) as a spin detector on a back-gated (Bi,Sb)2Te3 channel. We observe hysteretic voltage signals as the magnetization of the detector ferromagnet is switched parallel or anti-parallel to the spin polariza- tion of the surface current. The amplitude of the detected voltage change is linearly proportional to the applied DC bias current in the (Bi,Sb)2Te3 channel. As the chemical potential is tuned from the bulk bands into the surface state band, we observe an enhancement of the spin-dependent voltages up to 300% within the range of the electrostatic gating. Using a simple model, we extract the spin polarization near charge neutrality (i.e. the Dirac point).